IN MAKING: ARCHITECTURAL EXPERIMENTS BY HAND (featuring AY19/20 NUS DoA year 2 level 4 works)

SPECIAL EDITION AY2019/2020 YEAR 2 LEVEL 4: DESIGN EXPERIMENTS AND STUDIO WORK-IN-PROGRESS

IN MAKING

IMAGE CREDIT: KEE CHEOW YAN + ZHOU ZHEFANG + LEE YINSHIN

Building on the feedback from the previous week’s as well as our new research, this week’s design incorporates an air gap that functions as the locking mechanism. This mechanism is also designed to block or direct light. There is also great consideration for the weight and sturdiness of each structure. Whilst improving the structural integrity of each half, the weight of the cooler side was kept to its lowest possible using minimal bracing.

24

Atmospheric Onsen

Atmospheric Onsen

25

Building on the feedback from the previous week’s as well as our new research, this week’s design incorporates an air gap that functions as the locking mechanism. This mechanism is also designed to block or direct light. There is also great consideration for the weight and sturdiness of each structure. Whilst improving the structural integrity of each half, the weight of the cooler side was kept to its lowest possible using minimal bracing.

24

Atmospheric Onsen

Atmospheric Onsen

25

26

Atmospheric Onsen

Atmospheric Onsen

27

26

Atmospheric Onsen

Atmospheric Onsen

27

Experience in our model

49

Experience in our model

49

Inflation of latex air bags

Side louvres in motion

Josef Odvรกrka

Plot 1 (Block + 51) In the 47 Same Air

25 83

Inflation of latex air bags

Side louvres in motion

Josef Odvรกrka

Plot 1 (Block + 51) In the 47 Same Air

25 83

Studio Title

11 89

Studio Title

11 89

Week 3-4 nutsack In this week, shredded grey board bits was stuck together with latex to combine the insulating property of grey board and the waterproofing quality of latex to create a new material similar to that of paper mache.

Elasticity of latex was also considered in this experiment whereby the porosity increases when the device is stretched.

Another property this device puts into play is latex’s to be casted into tubes to contain water and potentially dissipate heat as water moves around the two climates.

26

STUDIO LLC 2 - p e r s o n s h e lt e r ( ly i n g )

Week 3-4 nutsack In this week, shredded grey board bits was stuck together with latex to combine the insulating property of grey board and the waterproofing quality of latex to create a new material similar to that of paper mache.

Elasticity of latex was also considered in this experiment whereby the porosity increases when the device is stretched.

Another property this device puts into play is latex’s to be casted into tubes to contain water and potentially dissipate heat as water moves around the two climates.

26

STUDIO LLC 2 - p e r s o n s h e lt e r ( ly i n g )

24 24

STUDIO LLC STUDIO LLC

1 - p e r s o n s h e lt e r ( ly i n g )

24 24

STUDIO LLC STUDIO LLC

1 - p e r s o n s h e lt e r ( ly i n g )

STUDIO LLC STUDIO LLC

23 23

STUDIO LLC STUDIO LLC

25 25

STUDIO LLC STUDIO LLC

23 23

STUDIO LLC STUDIO LLC

25 25

System I: Single Interlock 20 degree tilt

STUDIO LLC

Inverted ‘V’

(-)Very unstable, prone to collapse sideways (+) Reduced weight, adjustable opening

123

STUDIO LLC

131

System I: Single Interlock 20 degree tilt

STUDIO LLC

Inverted ‘V’

(-)Very unstable, prone to collapse sideways (+) Reduced weight, adjustable opening

123

STUDIO LLC

131

Final 1: Convex-shape (Frame + Bags below) Final 1: Convex-shape (Frame + Bags below)

Final 1: Convex-shape (Frame + Bags below + above) Final 1: Convex-shape (Frame + Bags below + above)

Final 1: Convex-shape (Frame + Bags below) Final 1: Convex-shape (Frame + Bags below)

Final 1: Convex-shape (Frame + Bags below + above) Final 1: Convex-shape (Frame + Bags below + above)

Iteration 1: Frame

(+) span a larger surface area + height (+) single connection allows some vertical flexibility

Iteration 2: Full Bags

(+) increase sideward span (-) adds some stability, though negligible

Iteration 3: Bags + Hollow Middle

(+) more tension+weight pulling structure downwards (-) unable to stand (top too heavy)

Iteration 4: Bags Alternating

(+) better stability than the previous, though negligible (-) still unable to stand

Iteration 1: Frame

(+) span a larger surface area + height (+) single connection allows some vertical flexibility

Iteration 2: Full Bags

(+) increase sideward span (-) adds some stability, though negligible

Iteration 3: Bags + Hollow Middle

(+) more tension+weight pulling structure downwards (-) unable to stand (top too heavy)

Iteration 4: Bags Alternating

(+) better stability than the previous, though negligible (-) still unable to stand

SPECIAL EDITION AY2019/2020 YEAR 2 LEVEL 4: DESIGN EXPERIMENTS AND STUDIO WORK-IN-PROGRESS

STUDIO LLC

39

IMAGE CREDIT: AHMAD AMIRUL + VVERONIKA LIM