JUPITER STIRRUP MOUNT BRACKET KIT INSTRUCTIONS
Issue 01 on20th September 2021
These instructionsare in addition to the standard luminaire& attachment instructionsthat were supplied with theproduct you have purchased. They should be read carefully & the attachment luminaireinstalled as per instructions, then pass on to the appropriate person for retention for futurereference & maintenance.
INSTALLATION - STIRRUP MOUNT BRACKET KIT
This is designed to be used with the Jupiter fittings:
1. Use the strirrup mounting bracket to mark up the required fixing points on a suitable surface to support the weight of the fitting.
2. Secure the stirrup mounting bracket in place using a suitable fixing method.
3. Using the allen key headed screws and washers provided in a small plastic bag, locate and secure the stirrup bracket onto the driver assembly N.B. allow for adjustment (Fig1.)
4. Adjust the fitting to the required position and lock into place by fully tightening the allen key head screwson both sides
Stirrup Mount Bracket Fixing Centres
Fig 1.