OCTA WALL 40 FABRIC + PANEL
OCTAWALL 40
FABRIC + PANEL
ONE SOLUTION. FOR FABRIC AND PANELS. THE ALL-ROUNDER W 906.
Because it's your decision if you want fabric or panels. OCTAwall 40 fabric + panel means more flexibility: both sides offer the possibility of using fabric or panels. This doesn't just make OCTAwall 40 incredibly flexible. It also makes storage and transportation easier, because from now on, all you need is one extrusion!
EXAMPLE FITTING: 4 W 906
3 W 840 + W 841
Fabric
Panel
DIMENSIONS IN MM:
20.8
26
11.8
4.3 40
2
40
4.5
4
7.5
2.5
7
14
Today fabric - tomorrow panel. The high quality hook and loop tape prooves itself through the safe and tool-less installation of panels. The well-proven system groove and silicone edge system adds tension to your fabric. Together, they offer a modern surface look and utmost flexibility.
Technical details: one frame element for installation of fabric and panel panel: 4 mm rigid foam fabric: fabric with silicon edges on all sides hook tape W 840 + loop tape W 841 W 840 is pre-assembled on all frames the same frame connection as with OCTAwall 40 and 60 (M 1477 and M 1496 respectively) standard version with W 916 corner connector: making mitres redundant alternatively available with internal corner connector Z 990 all existing OCTAwall accessories (such as base plates, LED spotlights, ‌) can be used with OCTAwall 40 fabric + panel as well
TECHNICAL FEATURES OCTAwall 40 fabric + panel
CONVENIENT. SYSTEM GROOVE FOR FABRIC. HOOK TAPE FOR PANELS.
3
OCTAWALL 40
FABRIC + PANEL
SEAMLESS FABRIC CORNER. NO COMPROMISE. THE S 382 CORNER PROFILE.
Flexible. Without interruption. Thanks to the new S 382 corner profile, there will be no visible corner upright anymore. The straight corner and minimalistic design allow for around-the-corner graphics, offering maximum advertisement space.
S 382 DIMENSIONS IN MM: 4.3
40
Ø 8.7
2 4 40
20.8
W 916 DIMENSIONS IN MM:
40
4
45.3
Think outside the box. Seamlessly. The W 916 corner connector allows for a seamless continuation of your graphics to the corner. This creates the possibility of an almost completely covered corner profile. The S 383 cover plate keeps the silicone edge safely in the system groove and closes off the profile.
PARTS OCTAwall 40 fabric + panel F R A ME EL EMENT
Aluminium | 1 × frame, for installation between 2 frames or 2 extrusions, incl. 2 x C 440/F adjustable foot and mounting-set M 1477, with W 916 internal corner connector (no mitre needed), with drillings for M 1951 and M 1953 Drillings for cable management possible on request
3 × mounting set M 1477
W 442/E.01
frame size: W 950 × H 2480 mm 7.76 kg
6 × mounting set M 1477, for installation between 2 extrusions
W 447/E.01
frame size: W 495 × H 2480 mm 6.82 kg
3 × mounting set M 1477
W 449/E.01
STRAIGHT, 455 MM
frame size: W 455 × H 2480 mm 6.73 kg
6 × mounting set M 1477, for installation between 2 extrusions
W 444/E.01
custom sizes dimensions and accessories have to be stated on order
W 443/E.01
curved, custom sizes radius, dimensions and accessories have to be stated on order (may not work with W 916 depending on radius)
STRAIGHT, 495 MM
STRAIGHT, CUSTOM SIZE
CURVED, CUSTOM SIZE
W 906.01
NEW! Available in June 2017!
x
frame size: W 990 × H 2480 mm 7.85 kg
STRAIGHT, 950 MM
26
W 906
40
Aluminium | can be fitted with fabric (in combination with silicone edge M 1313) or panels 6.35 kg | 6000 mm
Minimum radius 990 mm
4.5 4
FABRIC + PA N E L
M 1477
W 440/E.01
STRAIGHT, 990 M
F R A ME PROFIL E
y
FOR FABRIC + PANEL
40
W 916
5
T- PROFILE
PA N E L, FO R 90 ° AN G L E
W 453.01 Aluminium | for panels, 90° angle between frames, incl. 2 × Z 961/8 tension lock 2.44 kg | 2400 mm
2400
W 453
W 905
Also available in different lengths
T- PROFILE
FA B R I C , F O R 90 ° AN G L E
W 451.01 W 451
2400
Aluminium | for fabric, 90° angle between frames, incl. 2 × Z 961/8 tension lock 2.39 kg | 2400 mm
W 903
Also available in different lengths
DOOR E LE ME NT D I N R IG H T
W 459
W 455.01
Attention: On lock side, W 459 frame or W 976 extrusion have to be installed
2024
Aluminium | 1 × door DIN right, incl. 1 × threshold band, frame dimensions for fabric: W 935 × H 2024 mm 10.00 kg
935 950*
DOOR E LE ME NT D I N LE F T
* installation dimension
W 457.01
M O U N T E D A B O V E D O O R , 950 MM
W 457
* installation dimension
W 445/E.01
W 445
Aluminium | 1 × frame, for mounting above door W 455 / W 457, incl. 2 x M 1477 mounting sets, drillings for cable management available on request 3.43 kg
M 1477
450
W 459
950
6
W 459
2024 935 950*
FRAM E E LE ME NT
W 455
W 445
Aluminium | 1 × door DIN left, incl. 1 × threshold band, frame dimensions for fabric: W 935 × H 2024 mm 10.00 kg
Attention: On lock side, W 459 frame or W 976 extrusion have to be installed
W 445
W 455 / W 457
PARTS OCTAwall 40 fabric + panel F R A ME EL EMENT
FOR DOO R M O U N TI N G , 9 5 0 M M
W 459/E.01 Aluminium | 1 × frame, with drillings for door lock, incl. 2 × C 440/F adjustable foot and 3 × M 1477 mounting set 7.89 kg
W 459
2480
Used on lock side of W 455 and W 457 doors
950
U P R I GHT
FOR DOO R M O U N TI N G
W 976.01
W 445
Used on corners on lock side of W 455 and W 457 doors
2480
Aluminium | 1 × extrusion manufactured from 40 mm square extrusion M 1000, with drillings for door lock 3.14 kg | 2480 mm
W 976 W 455
40
FOR COR N E R , W I TH ADJUSTAB LE F O O T
W 990.01 Aluminium | 1 × extrusion manufactured from 40 mm square extrusion M 1000, incl. 1 × adjustable foot W 913 3.2 kg | 2480 mm
M 1000 2480
U P R I GHT
W 913
40
E X TR U SION
FOR COR N E R S W I TH S I L IC O N EDGE GR O O V E
S 381.01
Rahmen/Frame
Aluminium | 1 × extrusion manufactured from 40 mm square extrusion, fabric can be mounted over the profile onto the edge, manufactured from 40 mm square extrusion S 382, incl. 2 × end cap S 383 3.62 kg l 2480 mm
S 381
40
S 382.01 Aluminium | 1 × extrusion manufactured from 40 mm square extrusion, fabric can be mounted over the profile onto the edge 7.31 kg l 5000 mm
4.3
Rahmen/Frame S 383
Ø8.7
40
FOR COR N E R S W I TH S I L IC O N EDGE GR O O V E
2480
U P R I GHT
4
40
S 382
7
S 383.35
6
F O R P R O FIL E S 38 2
4
END CAP
Rahmen/Frame S 383
40
Plastic | to mount on S 382 extrusion, to ensure the silicon edge stays in groove 0.01 kg
S 382
40
HINGE PROF ILE
W 908.01
4.3
W 908
20
40
20
Aluminium | two parts, for stepless angle (90° – 180°) adjustment between walls, 5.60 kg | 5000 mm
4.3 40
M 1072.01
40
Aluminium 4.85 kg | 6000 mm
56
T RIANGULAR PROFILE
Can also be installed horizontally as wall bracing
M 1072
40
W 910.01 Aluminium | for frame elements, to clad the lateral frame edges, incl. 10 × E 470/C plastic clips (Recommendation: 2 pcs./m), 1.35 kg | 5000 mm
SIDE, 495 × 170 MM
Suitable for both left and right side
M 1941.21
5 40
40
Steel | for free-standing frame elements, mounted both laterally and on lower profile, incl. M 1951 BS (M8) mounting set, max. frame height = 2000 mm 5.80 kg
12
BASE PLATE
E 470/C
495
8
170
F O R LAT ER AL FR AM E EN D
120
CL ADDING PROFILE
W 910
PARTS OCTAwall 40 fabric + panel B A S E P L AT E
MIDDL E, 4 9 5 × 1 7 0 M M
M 1943.21 12
Steel | for free-standing frame elements, additional middle plate, mounted on lower profile, incl. M 1953 BS (M8) mounting set, max. frame height = 2000 mm 5.05 kg
170
Attention: can only be used in connection with M 1941!
495
SIDE, 60 0 X 2 5 0 M M
40
M 1951.21
12
Steel | for free-standing frame elements, mounted both laterally and on lower profile, incl. M 1951 BS (M8) mounting set, max. frame height = 2500 mm 7.36 kg
Suitable for both left and right side
120
250
B A S E P L AT E
600
B A S E P L AT E
MIDDL E, 6 0 0 X 2 5 0 M M
M 1953.21 12
Steel | for free-standing frame elements, additional middle plate, mounted on lower profile, incl. M 1953 BS (M8) mounting set, max. frame height = 2500 mm 6.61 kg
250
Attention: can only be used in connection with M 1951!
600
301
Steel | for free-standing frame elements, mounted both laterally and on lower profile, incl. M 1951 BS (M8) mounting set, for structures close to walls, one-sided overlap, max. frame height = 2500 mm 5.31 kg
40
250
M 1961.21
12
SIDE, 32 0 × 2 5 0 M M
120
B A S E P L AT E (HAL F)
M 1961
320
Suitable for both left and right side
M 1963.21 12
MIDDL E, 3 2 0 × 2 5 0 M M
Steel | for free-standing frame elements, additional middle plate, mounted on lower profile, incl. M 1953 BS (M8) mounting set, for structures close to walls, max. frame height = 2500 mm 5.31 kg
250
B A S E P L AT E (HAL F)
M 1963
M 1961
320
M 1961
M 1963
M 1961
Attention: can only be used in connection with M 1961!
9
FOR W 906
W 916.39
W 906
20.8
Zinc die-cast | incl. 2 × E 111/m and M1510/20 screws, for connection of 2 fabric tension profiles W 906 or M 1307 0.22 kg
40
45.3 11.7
CORN ER CONNE CTOR
40
M10
100 105.8
W 906
96.3 M10
Z 990 11.7
Zinc die-cast | incl. 2 M10 threads for C 440/F adjustable foot, incl. 2 × E 111 and E 111/20 hex-star screws, for profiles with 21 x 12 mm lock chamber 0.08 kg
Marginal distance for foot C 440/F = 100 mm
20.8
F O R F R A M E EL E M E N T S
Z 990.00
96.3
CORN ER CONNE CTOR
W 916
MOUNTING SE T
F O R F R AM E C O N N EC T IO N
M 1477.37
W 906 74
M 1000 39
Steel | to connect frame elements 0.04 kg
M8
M 1477
M 1 0 , F O R F R AM E EL E M E N T S
C 440/F.37 W 906
M10
M 951
Ø 40
Steel | for installation in frame elements in connection with Z 990 internal corner connector or W 916 corner connector 0.07 kg
80.5
ADJUSTABLE F OOT
Z 990 C 440/F
W 996.35 23.7
CABL E PROTE CTION
Plastic, light grey | to protect cables from damage during installation 0.01 kg
16.7
W 906
51.7
10
W 996
PARTS OCTAwall 40 fabric + panel LED LONG ARM SPOTLIGHT M 1498.31
H O O K TAPE
FOR FRA M E E LE M E N T
Retainer M 1481 535 22 12.5 16
Aluminium / die-cast, silver-grey | 12 W / 230 V, 4000 K, incl. 1 × M 1481 retainer, 1 × cable 3000 mm, with integrated transformer and screwed on safety glass, for mounting in system groove 4,3 mm, voltage 100 – 230 V 0.61 kg
250
12W/230 V
26
W 840.30
W 840 Hook tape
Polyamide, white | adhesive, width 20 mm, thickness ca. 2 mm 0.7 kg | 50 m
W 841 Loop tape
All frames are preassembled with hook tape!
LO O P TAPE FOR PAN E L
W 840 Hook tape
W 841.30 Polyamide, white | adhesive, width 20 mm, thickness ca. 2 mm 0.4 kg | 25 m
M 951.90 Plastic / Steel | T 30 hex-star 0.07 kg
W 1000.90 Plastic, red | to secure frames in place for safe packaging, storage. and transportation. Suitable for all OCTAwall frame systems. 0.01 kg
51.5
S PA C E R
97
51.5
14
HEX-STA R T 3 0
2
S C R E W DRIVER
W 841 Loop tape
11
PLACING OF LOOP TAPE W 841 TO FRAME 8* *= edge distance *= edge of distance loop tape of loop tape
8*
8*
180
180
8*
Y
Y
180
180
W 841 loop W 841 tapeloop tape
180 Y
Y
180 Y
Y
W 841 W 841
backside backside of panel of panel
panel edge panel edge
C C
180 Y 180
C = cable cut out height
Y 180
Y Y 180
180
180
55
C
150
height 180 Y
height
180 Y
POSITION OF CABLE CUT OUT (ON REQUEST)
X
180
180
width
width
X
X
55
X
C
C
55 width
12
150
C
150
TECHNICAL INFORMATIONEN OCTAwall 40 fabric + panel CUTTING DIMENSIONS Cutting dimensions door panel (fitting for W 455 and W 457) :
904
panel fill
2018
cut out for lock
210
28
panel fill
904
20
930
4
Cutting dimensions wall panel:
4
fabric dimension
panel width: outer frame dimensions -5 mm panel height: outer frame dimensions -5 mm measurement for fabrics: outer frame dimensions
panel dimension 2
outer frame dimension
2
13
EXHIBITION SYSTEMS PROJECT SOLUTIONS PRESENTATION INTERIOR DESIGN CLEANROOM SYSTEMS
EUROPE
AMERICA
OCTANORM® Belgium T. +32 2 344 9880 www.octanorm.be
OCTANORM® Canada T. +1 905 822 2108 www.octanorm.net
OCTANORM® France T. +33 1 4695 5406 www.octanorm.fr
OCTANORM® USA T. +1 770 7 32 1520 www.octanormusa.com
OCTANORM® UK T. +44 20 85 45 2945 www.octanorm.co.uk
OCTANORM® México T. +52 55 5804 6325 www.octanorm.com.mx
OCTANORM® Hellas T. +30 2310 79 6521 www.octanorm.gr
OCTANORM® Brasil T. +55 11 3807 2552 www.octanorm.com.br
OCTANORM® Italia T. +39 02 9645 1966 www.formulaotto.it
OCTANORM® Argentina T. +54 11 43 12 4000 www.octanorm.com.ar
OCTANORM® Nederland T. +31 50 309 5133 www.octanorm.nl
AFRICA
OCTANORM® Polska T. +48 22 773 0350 www.octanorm.pl
OCTANORM® South Africa T. +27 11 433 2010 www.octanorm.co.za MIDDLE EAST
OCTANORM® Adria T. +386 590 56301 www.octanormadria.com
OCTANORM® Emirates T. +971 4 340 6888 www.octanormemirates.net
OCTANORM® Espana T. +34 930 019 424 www.octanorm.es
AUSTRALIA
OCTANORM® Nordic T. +46 8 621 6500 www.octanorm.se OCTANORM® Russia T. +7 495 565 7920 www.octanorm.ru
OCTANORM® Australia T. +61 3 8773 8550 www.octanorm.com.au ASIA OCTANORM® Japan T. +81 45 511 8144 www.octanorm.jp OCTANORM® China T. +86 512 6283 3336 www.octanorm.cn
AW 7970.GB_OCTAWALL 40 FABRIC + PANEL_07/2017
OCTANORM® Germany Head Office Raiffeisenstraße 39 70794 Filderstadt T. +49 711 77003-0 F. +49 711 77003-53 info@octanorm.de www.octanorm.com