Inside Automation

issue 1 2013

OEM Automatic acquire Datasensor UK pages 2 & 3

Custom DIN-Rail Assemblies page 11

Cubic beacons & sounders page 4

MD’s comment

New investment!

Due to the rapid growth we have enjoyed over the last few years we have decided to increase the capacity of our warehouse facility in Whetstone.

We are therefore currently undergoing a major investment programme to install state of the art vertical storage machines and also improve the general layout of the warehouse. This will improve our efficiency and enhance our, already high, service levels.

By the time you read this the work will be completed and you will see more details in the next edition of Inside Automation due in May. We are always looking for ways to improve our products and service so with this in mind please send any feedback or comments you may have to me at richard.armstrong@uk.oem.se or telephone me directly on 0116 2846701.

Richard Armstrong Managing Director

Publisher OEM Automatic Ltd Editor Anne Massey Graphic design ByrĂĽn + Yarwood Associates Printer Novaprint Circulation 17,422 Contact details OEM Automatic Ltd Whiteacres Cambridge Road Whetstone, Leicester LE8 6ZG Tel 0116 2849900 Fax 0116 2841721 Internet www.oem.co.uk information@uk.oem.se 2

OEM INSIDE AUTOMATION 2013-1 WWW.OEM.CO.UK

OEM Automatic acquire Datasensor UK We are pleased to announce that on 30th November 2012 OEM Automatic Ltd acquired Datasensor (UK) Ltd who were the UK distributor for Datalogic sensors and safety products.

The business and assets have since been transferred from Datasensor (UK) to OEM Automatic at our Leicester address and as a result from 1st December all products previously supplied by Datasensor (UK) are now available from OEM Automatic.

Datalogic are fully behind this initiative and see OEM Automatic as a company whose financial strength, complementary product range and long experience in the UK market, make them an ideal partner to work with in the future.

OEM Automatic has companies throughout Europe and are particularly strong in the Scandinavian market where we have

successfully represented Datalogic for some years now. This acquisition is therefore seen as a natural development of our close partnership with Datalogic.

This article gives an overview of the range but we will also be publishing product specific articles in future editions of Inside Automation.

You can also find full technical details of all products by visiting our website at www.oem.co.uk and clicking on the Machine & Safety section.

Datalogic offer a comprehensive and complete range of cutting edge products for automation. Typically in the following sectors: • Automotive • Pharmaceutical • Food and beverage • Electronics and solar • Special purpose machines • Transportation and logistics Products Include: Sensors Complete range of universal and application sensors • Universal photoelectric sensors: proximity, background suppression, polarised retroreflex, through beam Safety products • Type 2 and 4 photoelectric safety light curtains with base and advanced functions (EDM, blanking, anti-interference, cascade and muting) • Sensors, control units and safety relays • Accessories Identification products • Fixed position and hand held barcode readers for industrial automation applications • Linear and 2D reading options • Complete range of accessories • RFID controllers, antennas & tags • Expert technical support Vision & measurement sensors Vision sensors for inspection and identification • Distance, dimensional and position sensors • AREAscanTM (multibeam light curtains)

For more information please contact Gareth Ford on 0116 2849900 or e-mail gareth.ford@uk.oem.se

OEM INSIDE AUTOMATION 2013-1 WWW.OEM.CO.UK

3

Isolation transformers are the reliable choice Specifically designed to meet the needs of isolation and safety isolation these open type single phase transformers are suited to a wide range of applications.

The Control & Signalling range have primary tapping’s suited to 230V or 400V but also have a +/-15V connection to allow for some input voltage adjustment depending on the application. Transformers up to 250VA have juxtaposed windings with an insulated barrier to provide insulation and interference filtering. Higher ratings have an electrostatic screen between windings.

All types can be screw mounted to a back plate or clip to DIN rail for units up to 250VA. The units comply with all relevant European standards and are UL/CSA approved.

These transformers are ideally suited for use on equipment being sold globally where international standards, lifetime and reliability are key factors.

• Primary tapping +/- 15V • 40VA to 4000VA • Laser engraved markings • DIN rail or mounting plate fix • Interference/disturbance filter

For more information please contact Anthony Wrighton on 0116 2849900 or e-mail anthony.wrighton@uk.oem.se

• UL/ CSA approval

Latest size cubic beacons & sounders are BIG & LOUD! The size option 3 of the cubic style LED beacons & multi tone sounders are now available.

This third size option is large at 184mm x 184mm and provides a highly visible signalling solution. The multi tone sounder offers 120dB sound level which is clearly audible even in noisy industrial environments.

Units can be stacked to make any combination of beacon and sounder as required. Other combinations are also available by incorporating smaller beacons and sounders from the existing Auer range.

• Stackable cubic design • High performance LED

The high impact resistant polycarbonate housings are rated to IP66 so suited to a wide range of industrial applications including outdoors.

4

OEM INSIDE AUTOMATION 2013-1 WWW.OEM.CO.UK

• 120dB multi tone sounder • IP66 rated • UL certified

For more information please contact Anthony Wrighton on 0116 2849900 or e-mail anthony.wrighton@uk.oem.se

Pushing on with linear actuators With more than 15 years experience in actuation solutions, TiMotion continue to design and develop cutting edge linear motion products.

TiMotion manufacture a full range of linear actuators, control boxes, hand sets, power supplies and accessories.

This range of products enables us to supply solutions from single actuators to complete systems.

• Linear actuators • Lifting columns • Gear motors • DC powered with 240v 50Hz AC power supply option.

• Up to 12,000N force available • Fully integrated switching – Micro switches for end limits – Potentiometer for position control – Hall sensors • Up to IP66 protection rating • Manual over-ride option • Many handset controls available (including wireless) Typical Applications: • Industrial lifting • Medical machinery • Furniture • Scientific and medical equipment

For more information please contact Adam Porter on 0116 2849900 or e-mail adam.porter@uk.oem.se

OEM INSIDE AUTOMATION 2013-1 WWW.OEM.CO.UK

5

Let’s make it Snappy!

A new ‘snap-on’ end stop is now available from Conta-clip.

The SES 35 attaches to TS35 DIN rails for a secure fit without the use of screws cutting down on valuable installation time.

Any concerns about movement on the DIN rail can be dismissed thanks to a strong mechanical grip ensured by the use of four stainless steel springs mounted in the foot.

The end stop can also be used to secure bus bar and has the facility for mounting a large marker tag on the top to aid terminal group identification.

• Matching profile of SRK/RK terminals • Quick installation time

• Bus bar compatible • 8mm wide

For more information please contact Paul Adkins on 0116 2849900 or e-mail paul.adkins@uk.oem.se

Total control at your fingertips • • • • • •

Full colour high resolution LCD touch screen 4” & 7” screen sizes Optimised for Millenium III Direct connection to programming port Compact & robust Extended connectivity

Crouzet has expanded their offer with a brand new range of programmable touch screens.

Optimised and intended for use with the Millenium III family of logic controllers the touch screens are connected directly to the programming port without the need for additional expensive communication modules.

The full colour LCD screens are available in 2 sizes and both offer high brightness/resolution with a wide viewing angle ideal for full graphic customisation of your application. Extended connectivity is achieved through RS232/RS485 serial ports with optional USB and/or Ethernet TCP/IP ports.

We have a demonstration panel available to showcase the many features of the touch screen, please contact us to discuss your application and arrange a visit from one of our engineers.

6

OEM INSIDE AUTOMATION 2013-1 WWW.OEM.CO.UK

For more information please contact Anthony Wrighton on 0116 2849900 or e-mail anthony.wrighton@uk.oem.se

Vertical multiple switch point liquid level switches In addition to single switch point vertical and side wall level switches previously highlighted, ValCo manufacture one of the widest ranges of Multi-point switching level products available on the market.

One of the strengths of the range is the ability to select float and stem tube materials to suit either the media being used or offer a cost effective alternative for price sensitive applications.

L6

A – A1

L5

L4

With the capability to offer a level switch with a combination of 6 floats (6 switch points) and a maximum stem tube length of 6 metres, we believe the Multi-point range can fulfil nearly every level control application.

L0 L3

L2

To put us to the test contact OEM Pressure and Flow (tel: 0116 2849900) with your requirements or check out the ValCo range on our web site at www.oem.co.uk

• Ideal pump control and high-low level emergency alarm applications • Internal and external mount versions.

• N/O , N/C and SPDT options • Electrical connection: – Pre-cabled – DIN form A – Gland

B

For more information please contact Neil Bailey on 0116 2849900 or e-mail neil.bailey@uk.oem.se

L1 B

OEM INSIDE AUTOMATION 2013-1 WWW.OEM.CO.UK

7

Ultra flexible copper busbar

ULTRAFLEXX is a highly flexible insulated braided busbar.

The conductor ends are press welded and pre-drilled therefore no crimps or clamps are required and contact resistance is kept to a minimum.

Ultraflexx is fast and easy to install and makes an ideal product for retro fitting at sites where there is no facility for pre-forming solid or laminated copper bar.

• • • • • •

CSA: 25mm² to 240mm² Rated current: up to 1200A with two parallel conductors Insulation: UL94 V0 chlorine & fluorine free Voltage: 1000 V AC, 1500V DC Dielectric strength: 20kV/mm UL/CSA approved

Available in lengths of 100mm to 1000mm as standard with a selection of hole sizes making Ultraflexx the ultimate flexible solution.

For more information please contact Paul Adkins on 0116 2849900 or e-mail paul.adkins@uk.oem.se

Precise monitoring with clear visualisation These latest voltage, current and power monitor relays offer a clearly visualised solution thanks to its built in LCD screen.

This allows for precise readings of measured values and switch point settings to one decimal place. The unit is programmed using the 3 front panel buttons and a clearly displayed, easy to navigate menu. Switching points can be set as a minimum or maximum value or a window function monitors both upper and lower limits. All have adjustable hysteresis and time delays can be added to the switch points.

There are single function units for monitoring voltage or current and a multi function version which simultaneously monitors both and in addition calculates various power parameters. The single phase versions of each type have one relay alarm output and the 3 phase versions have two.

The DIN standard housing is only 35mm wide and the units are suitable for a wide variety of applications where clear visualisation and precise measurement is critical.

8

OEM INSIDE AUTOMATION 2013-1 WWW.OEM.CO.UK

• • • • • •

Monitor relays with LCD display Clear visualisation with precise settings Monitor voltage, current & power Single & 3 phase versions Auto range detection 35mm DIN standard housing

For more information please contact Anthony Wrighton on 0116 2849900 or e-mail anthony.wrighton@uk.oem.se

Pressure switch range launched Based on the popular 0170 series, the new pressure switches from Suco have all of the features of the range but, combined with a selection of high performance integrated connectors; the switches are amongst the best on offer in terms of performance and versatility.

Connector types: AMP Superseal® M12x1 3-pole Deutsch DT04-3P®

• Factory set hysteresis – switch point, adjustable on site • Metric, BSP, NPT and UNF thread options • 0.3..200 bar switching range. 600 bar max system pressure • 48V change over switch function (SPDT) • IP67 – IP6K9K sealing (when used with corresponding connector)

The hexagonal body enables the switches to be installed using a socket wrench, ideal for use where space is a premium.

NBR, EPDM and FKM diaphragm/seal materials give the switches a media operating temperature range of -40°C...+120°C. Typical applications include: excavators, mobile and off-road hydraulic machinery or any environment where a reliable pressure switch is required with a high IP rating.

For more information please contact Neil Bailey on 0116 2849900 or e-mail neil.bailey@uk.oem.se

OEM INSIDE AUTOMATION 2013-1 WWW.OEM.CO.UK

9

AlphaRex3 digital time switches are moving with the times AlphaRex3 is the latest innovative addition to the digital time switch range available from Legrand.

There are single and dual channel versions available with zero crossing switching that not only reduces stress on the output relay but also helps extend the lifetime of the load.

The astronomical versions can be programmed with a grid location to allow precise calculation of sunrise and sunset times. This is ideal for automatic lighting control without the need for external light sensors.

These devices can be set to 0.1 second clock precision giving unrivalled accuracy and for standard applications are programmed using the front panel push buttons on the device. More expert programming can be achieved either on site or remotely using a PC, data key and Legrand’s patented programming software.

• 1 & 2 channel digital time switches • Astronomical option for accurate sunrise/sunset calculation • Zero cross switching for extended lifetime • Remote programming via PC data key • Accurate to 0.1 second

For more information please contact Anthony Wrighton on 0116 2849900 or e-mail anthony.wrighton@uk.oem.se

Temperature & Humidity Transducer • RS-485 • Optional 2 analogue outputs • Choice of sensor protection shields with built in filters • Software programmable • IP65 protection • Stores measured & calculated min/max values

The P18D is a compact transducer for the continuous measurement and conversion of relative humidity and ambient temperature.

The measured values are available on the RS-485 Modbus output and you have the option of adding two configurable analogue output signals of 0/4-20mA or 0-10vdc if required.

10

OEM INSIDE AUTOMATION 2013-1 WWW.OEM.CO.UK

Users can now see the current temperature, relative/absolute humidity and dew point with the built in LCD back lit display located on the front of the unit.

A capacitive sensor that is located on the top of the device can be easily used with gloved hands to select which parameters are displayed or the display can be set to constantly scroll if preferred.

For more information please contact Paul Adkins on 0116 2849900 or e-mail paul.adkins@uk.oem.se

Custom DIN-Rail Assemblies Bespoke markers

Phase colours available for ease of identification Why not let OEM Automatic build complete DIN rail terminal assemblies to your individual specification?

If you are building the same combination of DIN rail terminals on a regular basis it may save you time and money by purchasing as a ‘ready to fit’ assembly.

Even simple assemblies can be time consuming to build, from cutting the DIN rail to length to creating custom marking of each terminal.

OEM Automatic can offer this service and advise on ways to improve your existing profiles which could reduce wiring times and physical size even further.

All assemblies can be ordered under a single part number and scheduled or called-off as required to meet planned production.

Benefits of complete DIN rail assemblies: • Reduce stock holding – only buy what you need, when you need it • Reduce purchasing cost – only order one part instead of multiple items • Reduce labour cost – saves skilled work force time in cutting rail & assembly • Reduce material waste – eliminates unused components Miniature assembly

For more information please contact Paul Adkins on 0116 2849900 or e-mail paul.adkins@uk.oem.se

OEM INSIDE AUTOMATION 2013-1 WWW.OEM.CO.UK

11

Please request a copy of our catalogues

■

Company Profile

■

Pressure & Flow

■ Machine

■ Motors Overview

■

Linear

■

Datalogic

■ Auer

■ Lumel

COMPANY NAME: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contact Name: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Position: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Address: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................... .........................................................

Postcode: . . . . . . . . . . . . . . . . . . . . .Country: . . . . . . . . . . . . . . . . . . . . .

Tel: . . . . . . . . . . . . . . . . . . . . . . . . . .Fax: . . . . . . . . . . . . . . . . . . . . . . . . .

Email: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Whiteacres, Cambridge Road, Whetstone, Leicester LE8 6ZG, UK. Tel: 0116 284 9900 Fax: 0116 284 1721 www.oem.co.uk e-mail: information@uk.oem.se Please remove me from your mailing list