Inside Automation 2011

issue 2 2011

Photovoltaic solutions from Contaclip page 3

New decoupling modules from Puls

Special offer from Baco

page 7

page 4

MD’s comment

R e n e w a b l e e n e rg y p r o d u c t s In this issue there are two products specifically aimed at renewable energy applications (Tecsis page 7 and Contaclip page 3). At OEM we recognise this is a growth area and our suppliers are responding by developing products to address these specific applications.

Following our acquisition in March of Echobeach Ltd we became the UK importer and distributor for Contaclip DIN rail terminals and connection systems. This further strengthens our product offering to OEM’s and system builders and makes us a very attractive option for customers wanting a wide range of panel products from a single source.

Finally, on the back page, you will find a special 50 year anniversary announcement from Kubler and we are proud of the fact that we have been Kubler’s partner in the UK for the last 15 years.

We are always looking for ways to improve our products and service so with this in mind please send any feedback or comments you may have to me at richard.armstrong@uk.oem.se or telephone me directly on 0116 2846701.

Integrated or external drive?

We have the complete package Whether you require a complete integrated solution or remote cabinet located drive the Gefeg-Neckar MSA series offers a sophisticated closed loop control in a modular system.

A novel electronics platform enables identical control of d.c. brushed or brushless a.c./d.c. motors. The MSA series has an integrated multi-turn absolute rotary encoder. With this state-of-the-art technology it is possible to integrate the complete drive train comprising motor, power supply, gearbox, 4Q electronics and interface to an external control system.

• One drive for d.c. brushed or a.c./d.c. brushless motors • Integrated or external drive option • Bus interface - CANopen or Profibus-DP • Reduced cabling – two connectors for power and signal • Controlled via analogue or digital signals • 53mm to 95mm diameter motor bodies • Up to IP65 • Available with planetary, spur or worm gears

Richard Armstrong Managing Director

Publisher OEM Automatic Ltd Editor Anne Massey Graphic design Byrån + Yarwood Associates Printer Abbotts, Lutterworth Circulation 16,264 Contact details OEM Automatic Ltd Whiteacres Cambridge Road Whetstone, Leicester LE8 6ZG Tel 0116 2849900 Fax 0116 2841721 Internet www.oem.co.uk information@uk.oem.se 2

OEM INSIDE AUTOMATION 2011-2 WWW.OEM.CO.UK

For more information please contact Nik Page on FREEphone 0800 7313189 or e-mail nik.page@uk.oem.se

Photovoltaic solutions Contaclip has launched a new capability brochure containing a comprehensive and wide range of components used specifically in the solar panel industry.

There is a range of DIN rail terminals with higher d.c. voltage ratings up to 1000V to meet the specific requirements of this industry. They are available in both screw

String box with overvoltage arresters

Junction box

and screw-less versions and typically in blue and red. Other products include d.c. load break switches, overvoltage arresters, junction boxes and enclosures. To further enhance the offer there is a range of preassembled terminal enclosures (string boxes) in a variety of combinations to suit all requirements.

D.C. load break switch

String box with overvoltage arresters and d.c. load break switch

For more information please contact Paul Adkins on FREEphone 0800 7313186 or e-mail paul.adkins@uk.oem.se

OEM INSIDE AUTOMATION 2011-2 WWW.OEM.CO.UK

3

New range of high performance aseptic diaphragm valves The new valves have applications in the pharmaceutical, cosmetics and life science markets and their enhanced CDSA (circumferential defined sealing angle) design, enables savings to be made in the time taken for system cleaning and sterilising.

Tested and approved to EHEDG document N°8, ASCO Aseptic valves feature a circumferential defined sealing angle which, compared with valves with a conventional seat body, provides a number of important operational benefits. These include no dead volume, reduced cleaning times in SIP systems, reduced time and chemical volume of CIP systems and better sealing performance.

Features • Diaphragm materials: EPDM, EPDM and PTFE (1 piece) and EPDM and PTFE (2 piece) to match the application • Available in sizes from DN4 to DN100mm (1/4” - 4”) • Stainless steel 316L bodies Accessories • Optical position indicator • Control box with AS-i interface • Mechanical switch for the open position • Manual over-ride and support for inductive switches

For more information please contact Neil Bailey on FREEphone 0800 7313187 or e-mail neil.bailey@uk.oem.se

Enclosed switch disconnector special price offer

Part Number 0172061 0172161 0172061 0172161

4

Description Enclosed 3 Pole Switch 25A Enclosed 3 Pole Switch 32A Enclosed 3 Pole Switch 25A Enclosed 3 Pole Switch 32A

OEM INSIDE AUTOMATION 2011-2 WWW.OEM.CO.UK

This enclosed 3 pole switch disconnector from Baco offers a versatile cost effective solution that is quick and easy to install.

For a limited time we are able to offer these units at special net prices with additional savings for larger quantities.

The IP66 enclosure base has 2 knockouts, top and bottom for cable entry and the cover with integral padlockable handle is quickly secured using only a single screw.

There are two switch rating options 25A & 32A and it is possible to add an additional neutral pole or auxiliary contact if required.

• IP66 ingress protection

Min Qty 10 10 50 50

Net Each 16.24 17.31 14.94 15.93

• 25A & 32A switch ratings • Integral tamper proof padlockable handle • Single screw fixed cover • Option to add neutral pole/auxiliary contact

For more information please contact Anthony Wrighton on FREEphone 0800 7313186 or e-mail anthony.wrighton@uk.oem.se

Level headed double deck terminal

• Screws all on same level • Quick installation time • Compact & only 6mm wide • Internally linked option Most double deck terminals have an inherent problem! Once the top deck cable is installed it obstructs the bottom level actuation screw. This makes it difficult to access the screw without removing the top level cable again or risk damaging it!

Contaclip have solved this problem with the RKDG4 double deck terminal. This clever design has all the actuation screws on the same level and this guarantees easy access to all of the screws even when fully wired.

This can also help reduce the possibility of leaving the bottom screws loose as with a standard ‘Top Hat’ style double deck terminal.

• Top level cross connectable • Beige or blue colour

For more information please contact Paul Adkins on FREEphone 0800 7313186 or e-mail paul.adkins@uk.oem.se

Pressure sensors for safety applications in mobile hydraulics The new European directive 2006/42/EC will place new requirements on machine builders in many areas.

The new pressure sensors type P3375 from Tecsis fulfil SIL-2 according to IEC 61508 and Category 3, Performance Level d, according to ISO 13849-1. Therefore they can be used for mobile hydraulics applications to meet the requirements of this new directive. Internal redundancy of the pressure measurement and two independent outputs sent to an on-board processor are used to monitor the integrity of the system. Applications include excavators, quarry machinery, agricultural machinery and off-highway vehicles.

• Pressure ranges up to 1000 Bar • Mechanical protection: 500g shock loading 20g vibration • M12x1 (4 pole) connector IP67 (1.5m cable IP69) • 2 x 4-20mA outputs (inverse 20-4mA option) • G1/4 pressure port connection (other options available) For more information please contact Neil Bailey on FREEphone 0800 7313187 or e-mail neil.bailey@uk.oem.se

OEM INSIDE AUTOMATION 2011-2 WWW.OEM.CO.UK

5

Pressure sensitive safety edge‌ quickly

If your machine or door has a dangerous trap point Gelbau has the solution.

The Gelbau Safe-edge system is extremely versatile and can be easily incorporated into most systems. Unlike other solutions the unique design of the edge means that it is extremely durable and will continue to operate even when badly damaged.

However, when a safety edge does need replacement it is usually an urgent requirement. As most of these systems are specific to the application, replacements can be on long lead times which is where OEM can help. We have extensive stock of

all of the standard profiles and accessories and are equipped to assemble complete safety edges at our workshop. We can usually deliver fully assembled custom safety edges to the customer’s specification within 2-3 days, or parts only if preferred.

Conductive rubber

Copper cores

Insulating rubber

Here are just a few typical application examples: machine, lift doors and loading bays For more information please contact Martin Illston on FREEphone 0800 7313186 or e-mail martin.illston@uk.oem.se

6

OEM INSIDE AUTOMATION 2011-2 WWW.OEM.CO.UK

Redundancy modules utilise mosfets instead of diodes

The latest addition to the Puls Dimension range is two new decoupling modules that can be used to build redundant power systems. Ideal for critical applications, the modules allow two or more identical power supplies connected in parallel to provide continued operation following the failure of any one unit.

The unique feature of these units is the use of mosfets instead of diodes for decoupling the two input channels. This reduces the power losses and therefore the heat generation allowing the units to be packaged in smaller housings saving

valuable DIN rail space. For the first time just one redundancy module is now required to build a 40A redundant system.

The units are the same style as the rest of the Dimension range and have large screw terminals for a safe and fast installation.

• Decoupling modules for 20 & 40A redundant systems • Dual input with single output • Minimal losses through use of mosfets • Rugged metal slimline housings • 3 year warranty

For more information please contact Anthony Wrighton on FREEphone 0800 7313186 or e-mail anthony.wrighton@uk.oem.se

Temperature sensor with programmable USB interface The PT Compact USB is a new model of the PT Compact product line from Tecsis GmbH.

• Accuracy < 0,2 % of the measurement range

The measurement range can be adjusted quickly and simply with the easy-to-use software so a special programming interface is not needed. The user only needs a PC with a standard USB port. The temperature range of the standard version is -50…200°C. A high temperature version with -50…600°C measurement range is also available.

• Wetted parts: stainless steel

• Output signal 4-20 mA or 0..10 V • Electrical connection: DIN A connector • G½” process connection (options and various probe lengths available) The PT Compact USB is proving particularly suited to environmental applications such as ground source heat pumps and solar energy systems for precise setting of the temperature controller for the individual application.

For more information please contact Neil Bailey on FREEphone 0800 7313187 or e-mail neil.bailey@uk.oem.se

OEM INSIDE AUTOMATION 2011-2 WWW.OEM.CO.UK

7

50 years of innovation Kübler celebrated their 50 year anniversary last year; the core business of the Kübler Group is the design, development and manufacturing of position and movement sensors, display and counting technology.

Kübler is constantly working to design new and innovative products. They pride themselves on manufacturing high quality products in a short time frame to provide the customer with a solution to almost any application.

Position and Motion Sensors

Counters and Process Indicators

• Incremental encoders

• Display and preset counters

Connector and Signal Transmission Technology

• Absolute encoders

• Timers and preset hour meters

• Slip rings

• Linear measuring technology

• Frequency meters and tachometers

• Optical fibre signal transmission

• Inclinometers

• Combination time and energy meters

• Connection technology

• Position displays

• Accessories

• Process displays and controllers

Whiteacres, Cambridge Road, Whetstone, Leicester LE8 6ZG, UK. Tel: 0116 284 9900 Fax: 0116 284 1721 www.oem.co.uk e-mail: information@uk.oem.se