OEM info 1/2019 Baltics ENG

B A L T I C

S T A T E S

Issue 1 2019

We delivered to our customers a new cost-effective safety solution Pages 6-8

The recognized Puls quality for an attractive price Page 4

Explore Hokuyo laser scanners

Pages 9-11

OEM now also offers LED displays as a turnkey delivery Page 19

2

O E M B A LT I C I N F O # 1 - 2 0 1 9

Ergonomic emergency stop buttons from Baco

Safety laser scanners

5

9

Redundant systems without redundancy modules

New cabling solutions for food and beverage industry applications

The pattern projector generates a coding image on the surface of the item to be scanned, which allows accurate identification of the shapes.

80x80x95 mm

PULS offers a unique feature: No need for additional redundancy modules in 1+1 and n+1 redundant systems.

12

Products developed specifically for the needs of the food and beverage industry, such as: protection hose series FLEXA-FOOD and new ECOLAB WSOR cables.

13

15

18

5/NEW “ALL-ROUND” SYR-LINE TIME RELAYS The modular, 17.5 mm wide series includes 1x16 A and 2x8 A time delay, multifunctional, and repeat cycle relays.

12/ UPDATED MOLEX MPM JUNIOR TIMER CONNECTOR CABLE

Junior Timer connectors are a popular choice for magnet valve electrical quick connectors.

14/NEW, FASTER USB PRESSURE SENSOR

The newest USB pressure sensor GenSpec DYNAMIC from the sensor manufacturer ESI is faster as compared to its predecensor.

16/A WIDE RANGE OF TERMINAL STRIPS AND SCREW TERMINALS

TFT and OLED displays in sizes ranging between 0.49” and 19”

16/NETWORK CABLES AND APPLIANCE RECEPTACLES

In addition to special cables, OEM offers ready-to-use network cables with moulded plugs.

17/CUSTOMER-SPECIFIC MEMBRANE SWITCH OEM Electronics delivers customer-specific membrane switch for industrial needs.

17/CUSTOMIZED BEARING PRODUCTS

- Tailor-made solutions are available through IBEC. - High-qualityroller, leaf, and conveyor chains through CHALLENGE.

18/KEYBOARDS FOR DEMANDING CONDITIONS The product range includes various standard and customer-specific industrial keyboards.

We have engaged in co-operation with a new supplier, Körner, in the connection products segment.

issue 1 2019

Chief Editor REIN OTTENDER Appearance and Layout TIMO LEMPIÄINEN Circulation 1400 PC.

OEM Eesti Oü Aia 8, 80010 PÄRNU More information from products gives: - Rein Ottender, tel. +372 5059 849 rein.ottender@oem.ee - Aare Alamaa, tel. +372 5295 114 aare.alamaa@oem.ee

Photoneo PhoXi 3D scanners

Versatile properties in small size

OEM Automatic SIA Vilandes 3-3, LV-1010 Riga More information from products gives: - Aare Alamaa, tel. +372 5295 114 aare.alamaa@oem.ee

OEM functions as the manufacturers’ sales organisation in Baltic States by marketing components and electronics source materials for manufacturing and design industries.

The head office and warehouse are located in Turku.

OEM Baltic companies are part of the Swedish OEM International group listed on the Stockholm Stock Exchange.

The group consists of 34 units; we operate in 14 countries.

OEM Automatic UAB Raudondvario pl. 101, Kaunas LT- 47184 More information from products gives: - Algimantas Petrauskas, tel. +370 640 15878 algimantas.petrauskas@oem.lt

O E M B A LT I C I N F O # 1 - 2 0 1 9

R ELAY SC H OOL - L ESS 1 ON 1

3

Lesson

The contact plate has been divided into two parts, both of which have their own contact pin

B IF U RC AT ED C ON TA C T

Can you distinguish between a bifurcated contact and a normal contact at a glance?

A BIFURCATED CONTACT IS RELATIVELY EASY TO IDENTIFY.

The contact plate has been divided into two parts, both of which have their own contact pin. The pins move at the same time and make contact with their counterpart. This technology allows excellent reliability.

WHEN DO YOU NEED A BIFURCATED CONTACT?

We offer relays with bifurcated contacts from each relay series (MRC, QRC & IRC).

Bifurcated contacts are the best option for connecting very low signals starting at 1 mA/5 V. A good example is connecting input signal from sensor to logic control.

Standard contacts come with 0.2 μ gold plating, since gold conducts electricity better than most other metals. This ensures interference-free signal transmission.

• Available in MRC, QRC, and IRC series • 1 mA / 5 V • Gold-plated contacts as standard

The letter “T” in the item code means that the relay is equipped with bifurcated contacts.

New WADI cable gland series from Jacob The new WADI product family by Jacob features a completely redesigned gland rubber, which allows extensive sealing and tightening area. The new gland rubber exerts pressure on the cable even more smoothly, so that the cable sheath is safe against point loads.

Not only does the smooth pressure protect the cable’s sheath, but the entire cable structure, ensuring interference-free signal transmission.

Extensive gasket area protects the cable sheath

Extensive sealing and tightening area

Integrated strain relief

For example, when using data, silicon, fibre optic, Ethernet, or coaxial cables, special attention must be paid to how the cable sheath is compressed. The new gland rubber is bipartite, which means that it can be used more extensively in case of different cable diameters in the same cable gland.

The EMC spring can also be installed into other frames, thereby obtaining, for example, an EMC cable gland resistant

The inner gland rubber part can be removed in order to use thicker cables

IP66 / IP63 – 10 bar (30 min.) IPX9 available soon

Working temperature: -40°C...+100°C (dynamic)

Conical design prevents twisting, regardless of the position

Good UV, ozone, and weather resistance

to high temperatures or railway-approved cable gland with EMC protection.

The product family consists of the following models: • •

•

•

Normal cable gland WADI One Railway-approved WADI Rail (EN45545, HL3) Heat resistant WADI Heat (available in brass and stainless steel) EMC model WADI One EMV

4

O E M B A LT I C I N F O # 1 - 2 0 1 9

The recognized Puls quality for an attractive price

The PIANO PIC series is designed for applications that require reliable DIN rail power supplies, which are focused to deliver the most widely required customer functionalities.

Our PIC units offer this simplicity without making compromises on PULS’ renowned qualities; efficiency, service lifetime, reliability and size. The PIC portfolio is composed of accurately designed and application-oriented 24V power supplies.

Reduced system costs

The PIC series is a future-proof and cost-effective investment for your system. With the PIC series you will permanently reduce your system costs. The high efficiencies (90.5 to 95.7% at full load) lower the heat losses and reduce your energy costs for the cooling of the system.

Increased process uptime

The high MTBF values (Mean Time Between Failures) of up to 1.72 million hours prove the absolute reliability of the PIC series. The power supplies are equipped with a DC-OK LED and they can also report the DC-OK signal via a floating relay contact (except PIC120.242C).

Flexible choice

The PIC portfolio allows you a high flexibility.

The units differ in very subtle details which gives you the opportunity to choose only what you really need.

For example: If you operate your systems exclusively in Europe or China you do not have to pay for a wide range input.

Mechanical robustness

The clean board design and high-grade housing make the PIC series resistant to mechanical shock and vibration. The light-weight design of 350-810g also reduces the static strain on the DIN rail. All units also comply with the V0 class of inflammability.

This specifically developed line card is unique in the industry 24V class. The benefit for our customers: They will get exactly what they need for their application – no cost intensive extra features but still manufactured to the highest quality in these essential functions. The PIC series represents PULS’ perfect blend of essential functionality with the highest quality.

PIC120

Output voltage: 24-28 V DC Output current: 5 A Power: 120 W Input voltage: 180-264 V AC or

90-132 V AC / 180-264 V AC Dimensions: 39x124x124 mm

PIC240

Output voltage: 24-28 V DC Output current: 10 A Power: 240 W Input voltage: 180-264 V AC or 90-264 V AC Dimensions: 49x124x124 mm

PIC480

Output voltage: 24-28 V DC Output current: 20 A Power: 480 W Input voltage: 180-264 V AC Dimensions: 49x124x124 mm

O E M B A LT I C I N F O # 1 - 2 0 1 9

5

Ergonomic

emergency stop buttons from Baco Are you among those who feel that emergency stop buttons ruin the appearance of an otherwise well-designed machine?

Emergency stop buttons must unfortunately be considered a “necessary evil” for engineers involved in device design.

An emergency stop buttons is an important part of any machine; even though it must be clearly visible and easily accessible, it is often thought to spoil the machine’s appearance. For years, Baco has paid special attention to product design.

The durable emergency stop buttons by Baco can be installed at prominent location on the machines without ruining their looks.

At the same time, Baco emergency stop buttons offer modern and ergonomic design. Naturally, all emergency stop buttons by Baco comply with ISO 13850 standard.

• Ergonomic design • Degree of protection IP66, IP69K • Impact resistance IK05/IK07 • Operating temperature -25°C…+70°C • 10-year warranty

New “all-round” Syr-Line time relays by Crouzet Crouzet has honoured the strong Syrelec time relay traditions established in the 1980s, first by Cronos and Cronos 2 series. Now, Crouzet presents the compact and extremely versatile Syr-Line series.

The modular, 17.5 mm wide series includes 1 x 16 A and 2 x 8 A time delay, multifunctional, and repeat cycle relays. As usual, the supply voltage range is wide, 12-240 V AC/DC. The adjustable time range is from 0.5 s to 240 h.

In the multifunctional versions, the pulse relay functionality can be selected, for example.

All settings are under standard protection cover and the time control dial is larger than ever, which improves setting accuracy.

• 17.5 mm wide time relay with versatile functions, mountable on DIN rail • 1 x 16 A or 2 x 8 A outputs in the same 17.5 mm wide enclosure • Supply voltage 12-240 V AC/DC • Time range 0.5 s-240 h • Informative LED indication of relay operation

6

O E M B A LT I C I N F O # 1 - 2 0 1 9

OPTIMAL SAFETY SOLUTIONS IMPROVE COST-EFFECTIVENESS Text: Sari Lommerse Images: Mika Okko

EID Robotics Oy from Kuopio manufactured for Sinituote a palletizing robot cell capable of loading 18 different products at the same time in a compact space.

The safety component solution supplied

by OEM is a central part of the new automation system.

At the Sinituote cleaning products factory in Kokemäki, the palletizing robot stacks product packages onto pallets. Several products arriving from the taping machine must be loaded at the same time; the robot identifies the products by the barcode and transfers them to the dedicated pallet.

Jari Helminen, CEO of EID Robotics, monitors the robot’s operation – he is there to check that the unit operates exactly as it is supposed to. − About 200 boxes go through here in an hour. The mass of the box and the number of pallets influence the rate: the less pallets there are and the lighter are boxes, the faster is palletizing performed, Helminen explains.

Sinituote manufactures cleaning products, Kungs vehicle care products, and smoker bags. The factory has an injection moulding plant where plastic components for all

The challenge is in making the robot cell safe without slowing down or otherwise interfering with production.

products are manufactured. Own brushing department takes care of brushing. Several different products are produced at the same time.

Jari Helminen, CEO of EID Robotics Oy: − I like that there are new, smart safety devices. Traditional safety equipment is often cumbersome to implement and use.

On the left, Jukka Heiska Production Manager of Sinituote, and Jari Helminen CEO of EID Robotics Oy.

The new palletizing robot cell has 18 palletizing stations, which means that 18 different products can be loaded at the same time. Empty pallets go in along a lane and at each palletizing station a lane can ‘be opened from which filled-up pallets are removed one by one. The lanes are monitored by safety laser scanners making sure the employees cannot access the robot operation area while it is in operation.

O E M B A LT I C I N F O # 1 - 2 0 1 9

7

The safety solution supplied

by OEM includes Hokuyo safety laser scanners and Arion security fences.

− Whenever a person approaches the lane, the robot stops. After loading of a pallet is completed, an area change is made in the scanner, the pallet is removed and the safety area closed again, Helminen explains.

− Even though the robot’s operation area seems like a single area, it includes dozens of different areas monitored separately, and the safety scanner.

A NOVEL SOLUTION

THE SOLUTION IS ALSO COST-EFFECTIVE

When considering for their system an efficient method compliant with EU machinery safety requirements allowing limiting of the robot’s operation area, the safety solution supplied

by OEM was finally chosen. It includes four Hokuyo safety laser scanners and Arion security fences. Safety scanners were chosen due to their versatility, Helminen says.

− The price/quality ratio of the solution is absolutely magnificent. In case of a light curtain solution, safety equipment would have made up a large part of the entire system’s price, since ten light curtains would have been required, and the volume of the work would also have been senseless.

OEM has been a co-operation partner of EID Robotics and one of its main supply channels of electrical and safety products since the beginning of the decade.

When the palletizing robot system was launched last spring, OEM was a natural choice for the cooperation partner. − Our professional relations in the field of machine vision system components go way back. For example, here, at Sinituote, we use cameras supplied by OEM. OEM provides excellent technical expertise and product support, and our inquiries are answered quickly, Helminen says.

8

O E M B A LT I C I N F O # 1 - 2 0 1 9

SAFETY LASER SCANNER FOR HIGHER SPEED The palletizing robot cell was delivered to Sinituote in November. Before this, EID Robotics assembled the cell at its own premises and tested it there.

Jukka Heiska, Production Manager of Sinituote, is satisfied with the result. − Everything has worked smoothly.

We make almost all of the machinery by ourselves, and as concerns safety, we perhaps include even too much protection.

When we buy something ready-made, it must be almost as safe. In practice, it would have been impossible to implement the solution in question sensibly in any other manner. The safety laser scanners also speed up the operation, since we used to have to open doors and electrical locks before accessing the robot’s operation area. Introduction of the new palletizing cell is excellent news for the company’s employees as well. − Lifting of the boxes is ergonomically questionable, since it is repetitive and physically demanding work.

Now, the employees can take up more pleasant tasks, Heiska says.

- We went through different alternatives for implementation of the safety solution. Hokuyo safety laser scanners turned out to be the most cost-effective and functional solution. They are also small in size and easy to program, say OEM Sales Engineer Ronie Schildt and Product Manager Tony Tarr.

For more information on the products, contact our experts.

From the left: OEM Product Manager Tony Tarr and Sales Engineer Ronie Schildt, Jukka Heiska Production Manager of Sinituote, and Jari Helminen, CEO of EID Robotics Oy.

OEM INFO #1-2019

Versatile properties

in small size 80x80x95 mm • 32 changeable fields • Dataoutput e.g. for navigation • Master/slave -function

on zone i t c e t o r P m MAX. 5

270° g Warnin

g Warnin

•

• • • • • •

zone 1

g zone Warnin 0m MAX. 2

zone 2

Resolution selectable from hand protection to body protection (min. detectable diameter 30, 50, 70 and 150 mm) Safety zone 5 m Warning zone 20 m Type 3, SIL2, PL d 4 OSSD safety outputs 2 protection zones or 1 protection zone + 2 warning zones

• Programming, PC or SD card • Puls encoder input • Muting applications

9

10

O E M B A LT I C I N F O # 1 - 2 0 1 9

3D laser scanner YVT series

New 3D laser scanner from Hokuyo with 35 m detection distance Scanning angle 210 degrees horizontally and 40 degrees vertically.

Ethernet interface with M12 connector.

The ultra-compact and lightweight scanner can be installed almost anywhere. Also usable outdoors owing to the scanner’s multi-echo system.

• •

•

• • • •

Detection distance 35 m Scanning angle 210° horizontally and 40° vertically Data points (resolution): 2590 points (none interlace mode, 25 fps) 518000 points (interlace HD mode, 0.1 fps) Ethernet interface Size 70x106x95 mm Enclosure class IP67 Weight 650 g

The Hokuyo 2D laser scanners m The scanner can detect size, loca data. The scanner is available in

Detecting scanne UST-series

Wide detection area and quick resp lightest in the industry.

• • • •

Detection distances 5/1 3 outputs for different a Scanning angle 270 deg USB/RS422 interface

Measuring scann URG-series

The scanners are affordable and acc the power supply. And the size is sm

• • • •

Detection distance 0,60 USB interface Scanning area 240 deg Size 50x50x70 mm

O E M B A LT I C I N F O # 1 - 2 0 1 9

2D laser scanners

measure the distance between the scanner and the environment. ation and target movement direction based on target scanning n the identifying version with digital output and as a measuring

scanner with raw data output. Laser scanners are suitable for applications where the robot’s surroundings are detected or obstacles identified in automated guided vehicle applications.

Scanner detection distances range from 4 m all the way to 80 m.

ers, UST and UXM series UXM-series

ponse time. UST series scanners are among the smallest and

10/20 m areas grees

Applications: Obstacle detection.

The scanners offer improved accuracy and resolution. Integrated heating for outdoor use.

The scanner is available in both target identifying and measuring versions.

• Detection distances 30/80 m • 3 outputs for different areas • Scanning angle 190 degrees • Ethernet interface • Also available in the measuring version, for location and size measurement

Applications:

Collision prevention.

Container location and size measurement.

ners, URG, UTM and UXM series UTM-series

curate. Directly connectable by USB connector, which also provides mall indeed!

0-4 m

grees

Applications: Robot surroundings detection.

Scanners with long detection distance and wide detection angle. The scanners of this series are quick as well – a scan lasts only 25 ms.

• • • •

Detection distance 0,1-30 m USB/Ethernet interface Scanning area 240 degrees Scan time 25 ms

Applications: Environment detection.

11

12

O E M B A LT I C I N F O # 1 - 2 0 1 9

Photoneo PhoXi 3D scanners PhoXi 3D scanners are based on sophisticated structured light imaging technology, in which the second camera in the traditional two-camera stereo capture has been replaced with a pattern projector.

The pattern projector generates a coding image on the surface of the item to be scanned, which allows accurate identification of the shapes.

The greatest advantages of the technology used by Photoneo include independence Enter the component’s CAD model from the target surface shape or and specify pick up points material and improved imaging speed.

The equipment’s embedded processing and control unit takes care of all the required calculations, producing final data as Point Cloud, Depth Map), normals, textures, and per pixel Confidence.

Photoneo 3D Localization C++ SDK allows target localization with the help of CAD models. The system is provided with information about the target component by entering its CAD model, based on which the system searches for a matching component in the area scanned and sends information on the location of the component back to the system. In some cases, it is also possible to specify one or more pick-up points, which are considered when returning coordinates.

Possible applications include, for example, various object recognition solutions, automatic picking and stacking, and inspection, measurement and analysis solutions.

Capture image

by PhoXi 3D scanner

• • • • • •

Get localized points for individual parts

5 models for targets of different size For all materials Unbeatable speed and scanning quality High 3.2M point accuracy Gigabit Ethernet interface Factory-calibrated, ready for integration

Updated Molex MPM Junior Timer connector cable Junior Timer connectors are a popular choice for magnet valve electrical quick connectors. Molex MPM Junior Timer connector cables have been on the market for a long time, but now Molex has also introduced the new Molex MPM Junior Timer connector.

The body of the new connector model is shorter as compared to the old model.

As standard, the new model is available with UL/CSA approved WSOR cable also suitable for mobile use, such as in energy supply chains, for example. We have Junior Timer connector cables of cable length 1-10 m in stock.

The old connector model is still available, with or without the electronics circuit.

• •

•

Shorter connector body Flexible WSOR cable 2x0.50 mm² or 2x0.75 mm² Fixed cable, length 1-10 m

O E M B A LT I C I N F O # 1 - 2 0 1 9

13

Redundant systems without redundancy modules With the CP series, PULS offers a unique feature: Power supplies with an integrated decoupling function based on efficient MOSFET technology. This means there is no need for additional redundancy modules in 1+1 and n+1 redundant systems.

Benefits at a glance • • • • •

188mm

24V / 20A

Redundancy module

Space saving compared to em the old syst

Reduced system complexity and costs Shorter installation times Space-savings of more than 45% Versions with hot-swap or spring-clamp terminals Versions with conformal coated PCBs available

45%

Space-savings

PULS managed to integrate the decoupling feature into the standard CP-housings. This means the dimensions of the units are identical to those of the standard CP10 (39mm) and CP20 (48mm). The slim units and the cancellation of the redundancy module allow space-savings of more than 45%.

Hot-swap

The new power supplies are available with hot-swap plug connectors or screwless terminals. The hot-swap connectors (CP10.241-R2 and CP20.241-R2) allow the replacement of devices during ongoing operation.

If there is no need for this feature or if heavy shocks and vibrations occur regularly in the application, the screwless units (CP10.241-R1 and CP20.241-R1) are the perfect choice.

Keep your system simple

The power supplies reduce system complexity and costs due to shorter installation times. Less cabling effort also means a lower failure risk caused by faulty connections. In addition there is only one part number that has to be managed.

• • • • • • • • • •

Boilt-in decoupling MOSFET Current sharing feature included Input voltage 85-264 V AC/88-187 V DC Excellent efficiency, 94.7 % (CP10.241-Rx), 95.2 %(CP20.241-Rx) 20 % Output power reserves Power reserve available continuously under +45°C Long service life Broad operating temperature range CP10 -25°C…+70°C, CP20 -40°C…+70°C Hot-swap or spring-clump terminals

24V / 20A

101mm

O E M B A LT I C I N F O # 1 - 2 0 1 9

NEW, FASTER USB PRESSURE SENSOR

GENSPEC DYNAMIC The newest USB pressure sensor from the sensor manufacturer ESI is faster as compared to its predecensor. Up to 1000 measurements per second combined with top-notch accuracy make the sensor an excellent tool for all kinds of applications from low pressure to high pressures, all the way to 5,000 bar.

• Measuring frequency up to 1,000 Hz • Accuracy 0.15% BFSL • Measuring ranges from -1..2.5 bar all the way to 0..5,000 bar • ESI-USB© software included • Windows 7, 8 and 10 compatible • Allows 16 measurements at the same time • Editable measurement report • Differential pressure measurement with reference characteristic • Measuring start-stop timer function • Temperature measurement

Program view

ESI-USB© SOFTA

14

Graphic view

O E M B A LT I C I N F O # 1 - 2 0 1 9

15

New cabling solutions for food and beverage industry applications The food and beverage industries have placed high expectations on products and packages.

OEM Automatic meets these expectations by expanding the range of its cable & connection technology product area with products developed especially for the needs of the food and beverage industry. These include the new protection hose series FLEXA-FOOD and the new ECOLAB WSOR cables.

These upgrades to our product line allows us to offer two different protection hose options with connectors, as well as a complete cable series designed for food and beverage industry requirements.

The products of the new FLEXA-FOOD series comply with FDA standards; they are flexible, antimicrobial,

airtight, water-resistant, and resistant to detergents and other cleaning processes commonly utilised in the food industry.

The Flamar WSOR cables are Ecolab-approved; the cables included in the series with stand water jet up to 25 bars at 45°C temperature.

Protection hose

Protection hose

AIRflex-GRS-FOOD

LIQUID-TIGHT-FOOD

Protection hose made of PVC material.

Smooth inner and outer surface.

Protection hose made of galvanized steel with PU jacket. Smooth surface.

Protection class IP68 Temperature range -25°C...+50°C ^ +70°C

Protection class IP68 Temperature range -40°C...+80°C ^ +110°C

Properties • Airtight and water-resistant • Oil-resistant • Silicone and cadmium free

Properties • Excellently fluid-tight • Acid and kerosene-resistant • Halogen-free

Metal connector

WSOR cables

Metal connector for protection hoses.

Stainless steel. Male thread.

The company FLAMAR owned by Molex has introduced a new cable type for food and beverage industry needs.

The WSOR cables by FLAMAR are Ecolab-approved.

The cables withstand water jet up to 25 bar at +45°C.

US-FOOD

Protection class IP68/IP69 Temperature range -40 °C...+125 °C

Properties • Water and dust-resistant • Vibration and stress-resistant • IP69 up to 40 bar

ECOLAB

• • • •

Signal cables (155220) Control cables (155221) Servo cables (155321) Bus cables (155421)

We can offer these in co-operation with Molex in small batches and at short delivery times!

16

O E M B A LT I C I N F O # 1 - 2 0 1 9

A wide range of terminal strips and screw terminals We have engaged in co-operation with a new supplier, KÖRNER, in the connection products segment.

Since 1951, Körner has manufactured products for electrical industry needs, focusing on various connection solutions. The most popular Körner products are various terminal strips and screw terminals, which are available in a wide range of versions. In addition, the product range includes certain connectors and junction boxes.

Contact us – let’s find suitable products for your needs together!

• Materials up to UL94V0 • Possibilities for customized markings • Screw terminals straight from the factory in the right size

Network cables and appliance receptacles In addition to special cables, OEM offers ready-to-use network cables with moulded plugs. We offer network cables with plugs corresponding to the requirements of different countries, equipped with either PVC or rubber cable. Alternatives are available from connectors that are more common to truly special customer-specific solutions.

The most common colours are black, grey and white, which are available directly from our warehouse, but we can deliver special colours as well. We can also print texts on the side of the cable, for example, the name of your company.

Keep in mind that OEM Electronics also offers appliance receptacles (IEC connector). In addition to standard models, these products are available in customized versions, for example, with ready-made cabling. Product optimization is popular, since in many cases, modification of the product at the factory saves a lot of time and money during the installation stage.

16

OEM INFO 1-2017

W W W. O E M . F I

Contact us – our range is certain to include a suitable product for your needs.

O E M B A LT I C I N F O # 1 - 2 0 1 9

17

Customer-specific membrane switch OEM Electronics delivers customer-specific membrane switch for industrial needs.

The key size, graphic design, and number of colours of the membrane and combined keyboards can be freely selected. The membrane keyboards are easy to install; use the glue on the backside for gluing

them on a level surface. The keyboards do not require additional fastening items or arrangements when installed onto a level panel or housing.

• •

• •

• • •

IBEC customized bearing products Tailor-made solutions are available through IBEC. For example, drawing parts, bearings of special size, and bearings with shaft/plastic coating.

OEM-owned IBEC is a quality control company located in Cixi, south of Shanghai. IBEC was founded in 2000. The production units used by IBEC are always ISO certified and IBEC personnel always inspect the final product.

Operating temperature -40°C...+80°C Surface mount components (LED, light transistor, etc.) can be installed in the membrane structure Backlighting option The keys can have flat or raised profile (bubble or edge elevations) EMI protection in membrane structure Touch control and slider control options Design-free key structure, customizable feel

The range includes high-quality roller, leaf, and conveyor chains Conveyor chains

For various challenging industrial applications.

Challenge conveyor chains have been found very useful at different applications, such as in palm oil, sugar, food, mining, oven manufacturing, paper, and cement industry conveyor solutions.

Roller chains and other standard chains

Stainless and food industry chains.

Challenge manufactures standard roller chain, in 1-3 line 5 m packages and in larger rolls (50/100 m). Standard and special chains used in agriculture, food and wood refining industries are also available in the Challenge range.

Chain sprockets

Taperlock, disc wheels and hub sprockets.

Special chains

Special chains for agricultural use.

Leaf chains

Forklifts, aerial work platforms and other lifting equipment.

Challenge also manufactures leaf chains for applications requiring higher tensile strengths. Available in fixed shape and in the form of rolls.

18

O E M B A LT I C I N F O # 1 - 2 0 1 9

TFT and OLED displays in sizes ranging between

0.49”and 19”

DLC Display Co. LTD is the newest TFT and OLED display manufacturer of our Displays and Keyboards product range.

DLC is an innovative, quick and high-quality display manufacturer. The DLC product range covers small and medium-sized TFT and OLED displays.

Similarly to OLED displays, active matrix displays (TFT) are suitable for locations where information is displayed in colour and in real time.

The product range covers small and medium-sized displays used mainly in demanding industrial and vehicle applications, but also in smart watches and hospital equipment. Touch panels can be integrated (incl. optical bonding) into the display module at the factory. Displays

by DLC are intended for professional use both indoors and outdoors.

Application examples: Smart watches, energy meters, access control equipment, payment terminals, scales, industrial machine and vehicle control equipment, hospital and laboratory equipment.

• • •

• •

Size classes 0.49”-19” Resolutions all the way to Full HD Technologies: TFT (TN), TFT (MVA), TFT (IPS), PMOLED and AMOLED Sunlight readable (special brightness) Touch panels: resistive and PCAP (optical bonding)

Keyboards for demanding conditions Indukey keyboards are designed and manufactured in Germany, including customer-specific solutions on a case-by-case basis.

Indukey is a world-leading manufacturer of industrial keyboards.

The product range includes various standard and customer-specific industrial keyboards. Keyboards designed for demanding conditions comply with laboratory requirements and heavy industry needs. A joystick, trackball or touchpad can be integrated in the keyboards, for example, depending on the customer’s needs.

•

•

• • • •

In addition to traditional desk models, numerous panel and worktop installation options A trackball, touchpad or joystick can be integrated in the keyboards Backlighting option through characters IP, EX and AM-rated keyboards are available, for example Surface material: plastic, metal or silicone Interface: USB and PS/2

O E M B A LT I C I N F O # 1 - 2 0 1 9

19

OEM now also offers LED displays by Nordic LED Solutions as a turnkey delivery

LED display solutions for industrial needs The high-quality LED displays by Nordic LED Solutions improve the visibility of your company efficiently and dynamically. With the help of easy-to-use remote control, you can conveniently update the news, products and services of your company or office, for example, thereby ensuring that the information displayed is always up-to-date.

The LED displays by Nordic LED Solutions are always delivered based on the turnkey principle, complete with design, illustrations, rack, and installation. Designed for the challenging weather conditions, the LED displays function flawlessly in both sunlight and harsh frosts.

Indoor and outdoor displays •

• • •

• •

Tailored accident information boards • Customizable • IP65 • Low power consumption • Easy to use Use the accident information board for informing of your company’s personnel and guests and for updating of health and safety information.

Excellent colour rendering and good contrast Wide viewing angles Low power consumption Designed to withstand the challenging weather conditions Automatic brightness adjustment Easy-to-use software

Handy soldering pots for quick wire tinning The soldering pot tips are directly compatible with JBC T245 and T470 handels. We also recommend the CT-SA rack. It holds the soldering iron firmly in place and tin splatter off the worktable.

C245-SP01, for T245 handel

Pot inner dimensions: L 15mm W 18mm H 10mm

C470-SP01, for T470 handel

Pot inner dimensions: L 15mm W 18mm H 10mm

C470-SP42, for T470 handel

Pot inner dimensions: L 40mm W 40mm H 10mm

Also, consider other soldering equipment by JBC and Purex fume extractors!

OEM Eesti OĂź

Aia 8, 80010 PĂ„RNU More information from products gives: - Rein Ottender, tel. +372 5059 849 rein.ottender@oem.ee - Aare Alamaa, tel. +372 5295 114 aare.alamaa@oem.ee

OEM Automatic SIA

Vilandes 3-3, LV-1010 Riga More information from products gives: - Aare Alamaa, tel. +372 5295 114 aare.alamaa@oem.ee

OEM Automatic UAB

Raudondvario pl. 101, Kaunas LT- 47184 More information from products gives: - Algimantas Petrauskas, tel. +370 640 15878 algimantas.petrauskas@oem.lt