P&F - Process brochure

PRESSURE & FLOW Process management

ILM-4 with I/O Link Inductive conductivity meter

ITM-5 Modular, front-flush turbidity sensor for low to high turbidities, with IO-Link

FMI Magnetic-inductive flow meter

MIXPROOF VEOX

L3 Pressure and level transmitter

NCS-M-11, NCS-M-12 Capacitive limit switch DPX AND DPAX Butterfly valves from DN25

INDUCTIVE CONDUCTIVITY SENSOR, 3A ILM-4 WITH I/O LINK • Direct measurement of concentration • Temperature compensated • 4-20 mA conductivity/temperature outputs • Fast temperature response time. T90, 15…60 s • Built-in display Inductive conductivity meter ILM-4 With ILM-4 it is possible to directly measure the concentration of a medium which can effectively improve the CIP cleaning process and thereby also be economically advantageous.

With our extensive knowledge of industrial process and control applications OEM also offers a concise and complementary range of hygienic process and analysis products by working closely with Anderson-Negele and Definox as our hygiene specialists.

REFRACTOMETER: IRM-11 Inline-measurement of the concentration of liquids.

Output in °Brix, Plato, refractive or customer specific

• Very compact (ø 66 mm, 480 gr.), front-flush refractometer

with simple inline integration without bypass • Fully automatic measurement in the desired intervals (adjustable from 2 sec), saving up to 1 man-hour of working per shift • In the case of manual measurement, the entire product produced between measurements, e.g. every 20 minutes, may be defective. IRM-11 can avoid product losses by its permanent measuring method • Fully temperature compensated for precise results even with rapid changes • The simple installation guarantees precise measurement already during mixing in the tank or exact adjustment during the running process • Long-life LED light source with highly resistant sapphire optics

s

HANDHELD MEASURING DEVICES • Measuring ranges G17xx -200…+450°C • Measuring ranges G15xx 0…14pH ambient temperature -20…+50°C • Illuminated display 180° rotating display • Battery life up to 5000 hours • Standard AA battery • Dust-tight and watertight housing IP65/IP67 Application areas

• Quality assurance in the laboratory • On-site inspection in food production • Water and waste water analysis • Inspection of the CIP process

MAGNETIC-INDUCTIVE FLOW METER FMI • Magnetic-Inductive • Measuring Range 0.1...10 m/s • Operating Pressure 0.1...11 bar absolute • Approvals: FDA; 3-A PRODUCT DESCRIPTION The FMI Magnetic Inductive Flow Meter from Anderson-Negele is designed for highly accurate flow rate and volumetric measurement of fluids and pastes for customers from the food and pharmaceutical industries. With an accuracy of ± 0.2% ± 1cm, the FMI exceeds the high expectations of the food and beverage industries as well as with product life span and cleaning; the FMI is also low maintenance and is available with all necessary certification for food and pharmaceutical applications.

CAPACITIVE LIMIT SWITCH - FOOD NCS-M NCS-M-11, NCS-M-12 • Capacitive level switch • Measuring range Dk ≥ 20 • Operating pressure max 10 bar • Approvals: FDA; EHEDG; 3-A Application/specified usage Limit detection of fluid also with low or no water content like syrup, fruit concentrates, alcohols and oils with a dielectric constant r (Dk) ≥ 2

MODULAR PLATFORM & IO-LINK, TURBIDITY SENSORS: ITM-51, ITM-51-R RELATIVE TURBIDITY METER Modular, front-flush turbidity sensor for low to high turbidities, with IO-Link Hygienic, front-flush turbidity sensor for media with a turbidity of 200…300.000 NTU equivalent in pipes from DN25 on.

• Active phase separation in the production process: Precise differentiation of product / mixed phase / water

• Minimisation of resource losses • Front-flush sensor in compact and modular design • Reduction of the water consumption and waste water treatment cost • Minimisation of the duration of a CIP-cleaning process • Glass-free sapphire optics • Flex-Hybrid: Digital IO-Link and analog 4…20 mA in parallel • Modular design: configurable from the low-cost basic version to the high-end model

• Front-flush sensor: Simplified pipe cleaning (pigging possible) ideal for media with adhesive fibres or particles

• Extended temperature and pressure range • Independent to reflexions at small diameters or electro-polished surfaces

• No color dependency (wave length 860 nm) • High reproducibility and fast response time • Selectable output value (%TU, NTU, EBC)

• Extended measurement range: 200…300.000 NTU equivalent

L3 PRESSURE AND LEVEL TRANSMITTER • Improved temperature compensation • High accuracy also with turndown up to 1:10 • Accurate level measurement also in small containers and with rapidly changing process temperatures • Modular design for individual configuration, with Smart Replace Design (easy component exchange in the field) • Integrated tank linearisation with density compensation for highprecision output of volume or mass (kg, litres, percent…)

• Easy adjustment of zero and span

DPX AND DPAX BUTTERFLY VALVES FROM DN25 • Reliable and economical technology • Quick installation and removal • Can be used anywhere, different types of gaskets

• Low pressure drop • Product flow without media retention

We offer high quality butterfly valves that meet the strongest requirements of process technology, and are the ideal solution for food, brewery, cosmetic and pharmaceutical processes.

MIXPROOF VEOX • New innovative design • Reduced number of packs • New seal ensures high performance and long life • Fast, easy service • Mixproof valve with multi body.

VEOX INNOVATIVE MIX PROOF VALVE OEM introduces the innovative concept of the new VEOX Mixproof from Definox, meeting the strongest requirements of process technology and is the ideal solution for food, brewery and cosmetics processes!

The Mixproof valve is fitted with two valve seats, each with a "floating" PFA seal in a special slot that makes the valve extremely easy to clean.

When the valve opens, the "floating" PFA seal allows cleaning in the track behind the PFA seal. The elastomeric structure of the PFA seal also ensures that the surface is not porous and does not develop cracks and is extremely resistant to chemical media.

The Mixproof valve is also available with leak-free opening: Sliding gaskets that guarantee complete tightness and therefore avoid product loss during opening.

The Mixproof valve is also available as a tank outlet valve which isolates the tank from the rest of the process.

The shape of the body and the valve seat ensures that the flow can be maintained with the same functions with floating gaskets.

PIGGING VALVES AND SYSTEMS Valves and systems • Developed from hygienic guidelines • Primary use for pigging systems • The valves are particularly suitable for CIP cleaning • For processes with high viscosity, fast curing media • Definox® offers a fully integrated valve solution Definox has for many years specialized in the manufacture of valves that meet the strongest requirements of process technology and is therefore the ideal solution for food, brewery, cosmetics, pharmaceutical and general processing industry.

Definox® Pigging valve: Developed in accordance with hygiene guidelines for the high standards of process technology and based on the same design principle as Defionx’s other valves.

Main application of pigging valve is for pigging systems, as the valves are particularly suitable for CIP cleaning and easy and quick installation.

Definox® Pigging Systems: Ideally suited for processes with high viscosity, fast hardening media, e.g., yogurt, dressing, cheese, chocolate, toothpaste etc.

With Definox® pigging valve you get a full integrated valve solution. So additional sources of contamination of valve and pipe systems have been eliminated. Other benefits are easy maintenance and quick installation.

Whiteacres Whetstone Leicester LE8 6ZG Tel +44 (0) 116 284 9900 pressureandflow@oem.co.uk www.oem.co.uk