LV Distribution Blocks & Flexible Busbar by OEM International

LV Distribution Blocks & Flexible Busbars

2 Pole Distribution Blocks 40 A, 80 A, 100/125 A

4 Pole Distribution Blocks 40 A, 80 A, 100/125 A

5-6

4 Pole Distribution Blocks 160 A

Distribution Blocks Neutral bar

1 Pole, 3 Pole Distribution Blocks Introduction 9

1 Pole Distribution Blocks 80 A, 125 A, 160 A, 250 A, 400 A

3 Pole Distribution Blocks 80 A, 125 A, 160 A, 250 A, 400 A

Single Pole Busbar Distribution Blocks 500 A

UNIPOLAR Terminal Blocks 1 Pole 80 A with supports

Low Voltage Insulators Introduction 14 Red insulators in polyester 15 Red spacing columns in polyester 16 Black insulators in polyamide 17 Black spacing columns in polyamide 18

Earthing and Neutral Terminals Earthing bars Double connection terminals Terminal supports Earthing terminals Double earthing terminals

19 19 19 20 20

Copper Braids Introduction 21 Flat tinned copper earthing braids 22 Round tinned copper earthing braids 22 Tubular braids in tinned copper 22 Copper braids in coils 23

COFLEX Laminated Busbar Introduction 24 COFLEX Insulated copper flexible bars 25 - 26

COFLEX PLUS Introduction 27

J-Link Braided Shunts Introduction 2

28 â&#x20AC;&#x201C; 31 OEM AUTOMATIC

Distribution Blocks

Introduction Teknomega offer a variety of distribution blocks which are used in terminal board distribution units. These include single blocks and compact blocks permitting the units to range from 40 A up to 500 A. The distribution block range can be used in various applications including switchboards, automation, control panels and distribution boards. Terminal board distribution blocks The 2-4 pole electrical distribution blocks from Teknomega are suitable for applications which range from 40 A to 160 A. The blocks can be fitted on to a din rail and include a unique yellow translucent protection screen. The 4-Pole modular up & down blocks are rated 160 A and are used in applications where there are too many wiring inputs and outputs to be placed on one side of the block. The 4-Pole side input distribution block is used for space saving and allows the incoming cables to be positioned at a 90Â° angle. Compact distribution blocks Ranging from 80 A to 500 A the 1 and 3 pole blocks suit applications where the effective short-circuit current value is higher than 10 kA. A guided access system has been introduced to each connection making the wiring easy and simple. Using galvanized steel for the screws and clamps increases the lifetime of the terminal blocks as the coating protects against corroding and rusting making them resistant to mechanical damage. Quick distribution blocks These range from 76 A and are available in 1 and 2 poles. The quick indirect spring hook-up outputs are efficient and safe.

Each block reaches UL approval standards. All the Q BLOCK distribution range can be fitted on DIN rail and/or bottom plate using the specific provisions. www.oem.co.uk

2 pole Distribution Blocks 40 A, 80 A, 100/125 A TECHNICAL FEATURES

• Brass conductors • Galvanized steel screws included • Insulation between phases • Front removable protection screen

• Self-extinguishing insulating structure: UL 94-V0 • DIN rail mount • C ompliant with standard IEC 947-7-1 – Low voltage auxiliary equipment terminal boards for copper conductors

Part Number: RPB0990, Reference: RPB 40-08, Type: 2 pole, 8 outputs Current (A)

Connections No. ø (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

Torque (Nm)

IN→

2.5…6

1.5…6

ø 5.5

2…3

←OUT

2.5…6

1.5…6

ø 5.5

2…3

←OUT

1.5…4

ø 4.0

2…3

←OUT

1.5…2.5

ø 3.0

2…3

Icw (kA)

Ipk (kA)

Ui (V)

L (mm)

H (mm)

P (mm)

4.2

500

Icw (kA)

Ipk (kA)

Ui (V)

L (mm)

H (mm)

P (mm)

4.5

500

Icw (kA)

Ipk (kA)

Ui (V)

L (mm)

H (mm)

P (mm)

4.2

500

Icw (kA)

Ipk (kA)

Ui (V)

L (mm)

H (mm)

P (mm)

4.2

500

Part Number: RPB0995, Reference: RPB 80-07, Type: 2 pole 7 outputs Current (A)

Connections No. ø (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

Torque (Nm)

IN→

10…25

6…16

ø 7.5

2…3

←OUT

1.5…4

ø 4.5

2…3

←OUT

1.5…4

ø 5.0

2…3

Part Number: RPB1000, Reference: RPB 125-06, Type: 2 pole 6 outputs Current (A)

100/125

Connections No. ø (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

Torque (Nm)

IN→

10…35

10…25

ø 9.0

2…3

←OUT

2.5…6

1.5…6

ø 5.5

2…3

←OUT

10…25

6…16

ø 7.5

2…3

Part Number: RPB1005, Reference: RPB 125-14, Type: 2 pole 14 outputs Current (A)

100/125

Connections No. ø (mm)

IN/OUT

Stripped w‑ire (mm2)

Wire with ferrule (mm2)

Torque (Nm)

IN→

10…35

10…25

ø 9.0

2…3

←OUT

10…35

10…25

ø 9.0

2…3

←OUT

2.5…6

1.5…6

ø 5.5

2…3

←OUT

10…25

6…16

ø 7.5

2…3

OEM AUTOMATIC

4 pole Distribution Blocks 40 A, 80 A, 100/125 A

Part Number: RPQ0980, Reference: RPQ 40-08, Type: 4 pole, 8 outputs Current (A)

Connections No. ø (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

Torque (Nm)

IN→

2.5…6

1.5…6

ø 5.5

2…3

←OUT

2.5…6

1.5…6

ø 5.5

2…3

←OUT

1.5…4

ø 4.0

2…3

←OUT

1.5…2.5

ø 3.0

2…3

Icw (kA)

Ipk (kA)

Ui (V)

L (mm)

H (mm)

P (mm)

4.2

500

Icw (kA)

Ipk (kA)

Ui (V)

L (mm)

H (mm)

P (mm)

4.2

500

100

Icw (kA)

Ipk (kA)

Ui (V)

L (mm)

H (mm)

P (mm)

4.5

500

Icw (kA)

Ipk (kA)

Ui (V)

L (mm)

H (mm)

P (mm)

4.5

500

100

Icw (kA)

Ipk (kA)

Ui (V)

L (mm)

H (mm)

P (mm)

4.2

500

Part Number: RPQ0985, Reference: RPQ 40-14, Type: 4 pole, 14 outputs Current (A)

Connections No. ø (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

Torque (Nm)

IN→

2.5…6

1.5…6

ø 5.5

2…3

←OUT

2.5…6

1.5…6

ø 5.5

2…3

←OUT

1.5…4

ø 4.0

2…3

←OUT

1.5…2.5

ø 3.0

2…3

Part Number: RPQ0990, Reference: RPQ 80-07, Type: 4 pole, 14 outputs Current (A)

Connections No. ø (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

Torque (Nm)

IN→

10…25

6…16

ø 7.5

2…3

←OUT

1.5…4

ø 4.5

2…3

←OUT

1.5…4

ø 5.0

2…3

Part Number: RPQ0995, Reference: RPQ 80-07, Type: 4 pole, 12 outputs Current (A)

Connections No. ø (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

Torque (Nm)

IN→

10…25

6…16

ø 7.5

2…3

←OUT

10…25

6…16

ø 7.5

2…3

←OUT

1.5…4

ø 4.5

2…3

←OUT

1.5…4

ø 5.0

2…3

←OUT

4…10

2.5…6

ø 6.0

2…3

Part Number: RPQ1000, Reference: RPQ 125-06, Type: 4 pole, 6 outputs Current (A)

100/125

Connections No. ø (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

IN→

10…35

10…25

ø 9.0

2…3

←OUT

2.5…6

1.5…6

ø 5.5

2…3

←OUT

10…25

6…16

ø 7.5

2…3

www.oem.co.uk

Torque (Nm)

4 pole Distribution Blocks 40 A, 80 A, 100/125 A TECHNICAL FEATURES

• Brass conductors • Galvanized steel screws included • Front removable protection screen • Self-extinguishing insulating structure: UL 94-V0

• DIN rail mount • Compliant with standard IEC 947-7-1 – Low voltage auxiliary equipment terminal boards for copper conductors

RPQ1025

Part Number: RPQ1005, Reference: RPQ 125-10, Type: 4 pole, 10 outputs Current (A)

100/125

Connections No. ø (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

Torque (Nm)

IN→

10…35

10…25

ø 9.0

2…3

←OUT

10…35

10…25

ø 9.0

2…3

←OUT

10…25

6…16

ø 7.5

2…3

←OUT

2.5…6

1.5…6

ø 5.5

2…3

Icw (kA)

Ipk (kA)

Ui (V)

L (mm)

H (mm)

P (mm)

4.2

500

100

Icw (kA)

Ipk (kA)

Ui (V)

L (mm)

H (mm)

P (mm)

4.2

500

132

Icw (kA)

Ipk (kA)

Ui (V)

L (mm)

H (mm)

P (mm)

4.2

690

Part Number: RPQ1010, Reference: RPQ 125-14, Type: 4 pole, 14 outputs Current (A)

100/125

Connections No. ø (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

Torque (Nm)

IN→

10…35

10…25

ø 9.0

2…3

←OUT

10…35

10…25

ø 9.0

2…3

←OUT

10…25

6…16

ø 7.5

2…3

←OUT

2.5…6

1.5…6

ø 5.5

2…3

Part Number: RPQ1025, Reference: RPQ C-125, Type: 4 pole, compact 7 outputs Current (A)

100/125

Connections No. ø (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

Torque (Nm)

IN→

6…35

6…25

ø 8.5

1.5

←OUT

1.5…6

ø 5.5

0.8

←OUT

1.5…16

1.5…10

ø 6.0

1.5

RPQ1025: Compact 4 Pole distribution unit 125 A 7 outputs per phase 10 outputs for neutral easy wiring IP20

OEM AUTOMATIC

4 pole Distribution Blocks 160 A TECHNICAL FEATURES

ADVANTAGES

• Brass conductors • Galvanized steel screws included insulation between phases • Front removable protection screen • Self-extinguishing insulating structure: UL 94-V0 • DIN rail mount • Compliant with standard IEC 947-7-1

• Separate inputs, forged conductors • Easy wiring • Modular depth: RPQ1016. RPQ1017 • RPQ1016: Version Up & Down: Connection of 2 phases on each side • RPQ1018: Version Side Input: Inputs orthogonal to outputs

RPQ1015

RPQ1016

RPQ1017

RPQ1018

Part Number: RPQ1015, Reference: RPQ 160-11, Type: 4 pole, 11 outputs Current (A)

160

Connections No. ø (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

Torque (Nm)

IN→

10…50

ø 11.5

8…10

←OUT

10…35

10…25

ø 8.5

2…3

←OUT

2.5…16

1.5…16

ø 7.0

2…3

Icw (kA)

Ipk (kA)

Ui (V)

L (mm)

H (mm)

P (mm)

600

168

Icw (kA)

Ipk (kA)

Ui (V)

L (mm)

H (mm)

P (mm)

600

176

105

Icw (kA)

Ipk (kA)

Ui (V)

L (mm)

H (mm)

P (mm)

600

176

105

Icw (kA)

Ipk (kA)

Ui (V)

L (mm)

H (mm)

P (mm)

600

154

Part Number: RPQ1016, Reference: RPQ 160-11-U&D, Type: 4 pole modular, 11 outputs Current (A)

160

Connections No. ø (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

Torque (Nm)

IN→

10…50

ø 11.5

8…10

←OUT

10…35

10…16

ø 8.5

2…3

←OUT

2.5…16

1.5…16

ø 7.0

2…3

Part Number: RPQ1017, Reference: RPQ 160-11-MS, Type: 4 pole modular, 11 outputs Current (A)

160

Connections No. ø (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

Torque (Nm)

IN→

10…50

ø 11.5

8…10

←OUT

10…35

10…16

ø 8.5

2…3

←OUT

2.5…16

1.5…16

ø 7.0

2…3

Part Number: RPQ1018, Reference: RPQ 160-11-SI, Type: 4 pole, side input, 11 outputs Current (A)

160

Connections No. ø (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

IN→

10…50

ø12.0

8…11

←OUT

10…35

10…25

ø 8.5

2…3

←OUT

2.5…16

1.5…16

ø 7.0

2…3

www.oem.co.uk

Torque (Nm)

Distribution Blocks Neutral bar TECHNICAL FEATURES

ADVANTAGES

• Designed for RPQ1017 • Brass conductors • Galvanized steel screws included • Self-extinguishing insulating structure: UL 94-V0

• Improved wiring capacity • Robust mechanical assembly • Direct electrical connection

Part Number: RPQ2017, Reference: RPN 160-14, Type: Neutral 14 outputs Current (A) 160

Connections No. ø (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

Torque (Nm)

←OUT

10…35

10…16

ø 8.5

2…3

←OUT

2.5…16

1.5…16

ø 7.0

2…3

Icw (kA)

Ipk (kA)

Ui (V)

L (mm)

H (mm)

P (mm)

600

161

OEM AUTOMATIC

1 pole, 3 pole Distribution Blocks 80 A, 125 A, 160 A, 250 A, 400 A TECHNICAL FEATURES

• Compact • Insulating body: PA 6.6 UL 94-V0 grey RAL 7035 • Cover: PC UL 94-V0. Translucent yellow • Conduction block: Tinned copper (RPU2995-RPU3000-RPU3005-

• Clamps: Galvanized steel and aluminium • Screws: Galvanized steel IP20 • Compliant with standard EN 60947-7-1UL 1059 standard recognized

RPU3015) brass (RPU3010-RPT3000-RPT3005)

www.oem.co.uk

1 pole Distribution Blocks 80 A, 125 A, 160 A, 250 A, 400 A

Part Number: RPU2995, Reference: RPU 80-6 S, Type: 1 pole, 6 outputs Current (A)

Connections No. ø (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

Torque (Nm)

6…16

ø 6.8

OUT

2.5…16

ø 6.8

OUT

2.5…6

ø 4.5

Icw (kA)

Ipk (kA)

Ui (V)

A (mm)

B (mm)

C (mm)

3.0

690

Icw (kA)

Ipk (kA)

Ui (V)

A (mm)

B (mm)

C (mm)

4.4

690

Icw (kA)

Ipk (kA)

Ui (V)

A (mm)

B (mm)

C (mm)

690

Part Number: RPU3000, Reference: RPU 125-8 S, Type: 1 pole, 8 outputs 125 A, for 9 mm Coflex Current (A)

125

Connections No. (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

Torque (Nm)

10…35

11 x 9

IN/OUT

6…16

8.7 x 6

OUT

2.5…16

ø 6.8

Part Number: RPU3005, Reference: RPU 160-8 S, Type: 1 pole, 8 outputs 160 A, for 9 - 13 mm Coflex Current (A)

160

Connections No. (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

Torque (Nm)

10…35

10…50

13.5 x 11.5

IN/OUT

6…16

8.7 x 6

OUT

2.5…16

ø 6.8

Part Number: RPU3010, Reference: RPU 250-11 S, Type: 1 pole, 11 outputs 160 A, for 13 - 15.5 mm Coflex Current (A)

250

Connections No. (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

Torque (Nm)

35…120

35…95

16 x 14

OUT

6…35

6…25

ø 9.0

OUT

2.5…16

ø 6.8

OUT

2.5…10

ø 6.1

Icw (kA)

Ipk (kA)

Ui (V)

A (mm)

B (mm)

C (mm)

1000

Part Number: RPU3015, Reference: RPU 400-11 S, Type: 1 pole, 11 outputs 400 A, for 15.5 - 20 mm Coflex Current (A)

400

Connections No. (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

Torque (Nm)

95…185

95…120

20.5 x16

OUT

6…35

6…25

ø9

OUT

2.5…16

ø 6,8

OUT

2.5…10

ø 6,1

Icw (kA)

Ipk (kA)

Ui (V)

A (mm)

B (mm)

C (mm)

690

Icc pk = Short-circuit current peak value expressed in kA: Icw = Effective value of short-circuit current. duration equal to 1 second. expressed in kA as per standard IEC 947-7-: Ui = Nominal insulation voltage 10

OEM AUTOMATIC

3 pole Distribution Blocks 80 A, 125 A, 160 A, 250 A, 400 A

Part Number: RPT3000, Reference: RPT 125-6 S, Type: 3 pole, 6 outputs 125 A, for 9 mm Coflex Current (A)

Connections No. (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

10…35

11 x 9

OUT

25…16

ø 6.8

125

Torque (Nm)

Icw (kA)

Ipk (kA)

Ui (V)

A (mm)

B (mm)

C (mm)

4.4

690

Icw (kA)

Ipk (kA)

Ui (V)

A (mm)

B (mm)

C (mm)

690

Part Number: RPT3005, Reference: RPT 160-6 S, Type: 3 pole, 6 outputs 160 A, for 9 - 13 mm Coflex Current (A)

Connections No. (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

10…70

10…50

13.5 x 11.5

OUT

2.5…16

ø 6.8

160

Torque (Nm)

www.oem.co.uk

Single pole busbar Distribution Blocks 500 A TECHNICAL FEATURES

• Insulating body: PA 6.6 UL 94-V0 grey RAL 7035 • Cover: PC UL 94-V0. Translucent yellow • Conduction block: Tinned copper • Clamp: Galvanized steel and aluminium

• Screws: galvanized steel IP20 • Compliant with standard EN 60947-7-1 • Direct connection with Ω Flex CFX

Part Number: RPU3020, Reference: RPU 500-11 S, Type: Unipolar 11 outputs 500 A, for 15.5 - 24 mm Coflex Current (A)

500

Connections No. (mm)

IN/OUT

Stripped wire (mm2)

Wire with ferrule (mm2)

Torque (Nm)

24 x 9

OUT

6…35

6…25

ø 9.5

OUT

2.5…16

ø 6.8

OUT

2.5…10

ø 6.1

Icw (kA)

Ipk (kA)

Ui (V)

A (mm)

B (mm)

C (mm)

690

A (mm)

B (mm)

C (mm)

D (mm)

E (mm)

Part Number: RPC3015 , Reference: RPC 400, Type: Terminal entry for RPU3015 In (A) 400 Material: Tinned copper connection with flexible and solid copper bars direct connection between distribution block and switch

Icc pk = Short-circuit current peak value expressed in kA Icw = Effective value of short-circuit current. duration equal to 1 second. expressed in kA as per standard IEC 947-7-1 Ui = Nominal insulation voltage

OEM AUTOMATIC

UNIPLOAR Terminal blocks TECHNICAL FEATURES

• Insulating body: PA 6.6 UL 94-V0, Grey RAL 7035 Blue RAL 5012 -

• Screws: Galvanized steel • Nominal insulation voltage: 500 V • Compliant with standard EN 60947-7-1

Green RAL 6024

• Cover: PC UL 94-V0. Translucent yellow • Conduction block: Brass ITB 80-11B

ITB 80-15G

ITB 80-7W

Type: 1pole 80 A Part Number

Reference

Colour

ITB1000

ITB 80-7 W

Grey

ITB1015

ITB 80-7 B

Blue

ITB1030

ITB 80-7 G

Green

ITB1005

ITB 80-11 W

Grey

ITB1020

ITB 80-11 B

Blue

ITB1035

ITB 80-11 G

Green

ITB1010

ITB 80-15 W

Grey

ITB1025

ITB 80-15 B

Blue

ITB1040

ITB 80-15 G

Green

L (mm)

Diameter of holes (mm)

Number of holes

Stripped wire (mm2)

Wire with ferrule (mm2)

Torque (Nm)

ø 7.5

4…16

2.5…16

ø 5.5

2.5…6

1.5…6

1.5

ø 7.5

4…16

2.5…16

ø 5.5

2.5…6

1.5…6

1.5

ø 7.5

4…16

2.5…16

ø 5.5

2.5…6

1.5…6

1.5

125

1 pole 80 A support TECHNICAL FEATURES

ADVANTAGE

• Material: PA 6.6 UL 94-V0, Grey RAL 7035l • DIN rail mount • Steel plate mounted with M4 screws

• Up to 4 ITB terminal blocks can be mounted on the support • It is possible to create distribution blocks of 2 pole, 3 pole or 4 pole

Type: 1 pole 80 A support Part Number

Reference

W (mm)

H (mm)

D (mm)

F (mm)

Fixing hole space (mm)

ITB2000

ITB-S DIN35

www.oem.co.uk

Low voltage Insulators

Introduction The insulators are used as a support for active conductors to provide electrical insulation. The characteristics of the insulators means they can be used for a support for electrical devices whilst giving high mechanical resistance values. The insulators are similarly used for spacing and stiffening elements of a system where copper or aluminium conductor bars are used. The various heights, widths and sizes of the threaded inserts make it possible to select the most suitable reference for the specific installation. The Teknomega range offers two product types both with high electrical insulation and mechanical resistance characteristics. These are obtained by using different production processes and materials. COMPRHEX: red insulators and spacing columns: • made of polyester reinforced with fiberglass • molded by compression ISO: black insulators and spacing columns: • made of polyamide reinforced with fiberglass, • molded by injection. Both ranges of have passed a range of application tests to check their mechanical and electrical resistance. The values obtained during the tests are indicated in the relevant technical tables. The tests were carried out in compliance with standards EN 60664-1 and EN 61439-1.

OEM AUTOMATIC

COMPRHEX – Insulators in polyester TECHNICAL FEATURES

• Insulation: Thermosetting polyester reinforced with 20% fiberglass • Self-extinguishing: UL94-V0 • Colour: Red RAL 3031 • Threaded inserts: Galvanized steel • Rated voltage: 1000 V AC/1500 V DC • Working temperature: -40…130 °C Part number

Reference

Height (H) (mm)

Ch (mm)

øD (mm)

E (mm)

Thread size

F (mm)

Torque (Nm)

RT (daN) Tensile strength

Compressive strength

RC (daN)

RF (daN)

CPH2000

CPH 16M4

ø 12

150

1500

100

CPH2005

CPH 20M4

200

2000

150

CPH2007

CPH 20M5

200

2000

150

CPH2010

CPH 20M6

240

2000

240

CPH2015

CPH 25M5

240

2900

220

CPH2020

CPH 25M6

340

2900

220

CPH2025

CPH 30M6

580

5900

460

CPH2030

CPH 30M8

580

5900

390

CPH2035

CPH 35M6

710

9000

400

CPH2040

CPH 35M8

710

9000

510

CPH2045

CPH 35M10

M10

710

9000

480

CPH2046

CPH 35M8W

790

13000

670

CPH2048

CPH 35M10W

M10

790

13000

670

CPH2050

CPH 40M6

900

12000

500

CPH2055

CPH 40M8

900

12000

500

CPH2060

CPH 40M10

M10

800

12000

500

CPH2065

CPH 45M6

900

14000

540

CPH2070

CPH 45M8

900

14000

650

CPH2075

CPH 45M10

M10

1100

14000

650

CPH2080

CPH 50M6

1100

12000

480

CPH2085

CPH 50M8

1100

12000

550

CPH2090

CPH 50 M10

M10

1100

12000

550

CPH2093

CPH 50M12W

M12

1250

16000

720

CPH2095

CPH 60M8

1400

18000

750

CPH2100

CPH 60M10

M10

1400

18000

750

CPH2101

CPH 70M10

M10

1500

17000

800

CPH2103

CPH 70M12

M12

1800

17000

800

CPH2105

ø 16

ø 18

ø 25

ø 28

35 41

ø 35

ø 34

ø 39

ø 37

Flexural strength

ø 45

ø 49

ø 52

CPH 75M12

ø 38

M12

1400

12000

650

CPH2112

CPH 80M12

ø 52

M12

1800

> 20000

1000

CPH2115

CPH 100M12

ø 52

2000

> 20000

900

CPH 100M16

M12

CPH2117

100

M16

200

2000

> 20000

900

www.oem.co.uk

COMPRHEX – Spacing columns in polyester TECHNICAL FEATURES

Thread size

F (mm)

Torque (Nm)

RT (daN) Tensile strength

Compressive strength

RC (daN)

RF (daN)

200

2000

120

200

2000

120

280

2200

170

280

2200

170

300

2200

200

300

2200

200

300

2200

200

340

2500

220

340

2500

220

340

2500

150

340

2500

150

370

2300

130

370

2300

130

370

2300

120

370

2300

120

370

2300

100

370

2300

100

600

4800

450

CLH 35M8-30

600

5000

400

CPH2620

CLH 40M8-30

650

5200

350

CPH2625

CLH 45M8-30

700

5500

280

CPH2630

CLH 50M6-30

700

5500

200

CPH2635

CLH 50M8-30

800

5500

220

CPH2640

CLH 55M6-30

800

5000

180

CPH2645

CLH 55M8-30

800

5000

200

CPH2650

CLH 65M6-30

800

4700

170

CPH2655

CLH 65M8-30

700

4700

170

CPH2660

CLH 70M6-30

700

4500

150

CPH2665

CLH 70M8-30

700

4500

150

Part number

Reference

CPH2510

CLH 16M5-20

CPH2515

CLH 16M6-20

CPH2520

CLH 20M5-20

CPH2525

CLH 20M6-20

CPH2530

CLH 25M5-20

CPH2535

CLH 25M6-20

CPH2540

CLH 25M8-20

CPH2545

CLH 30M6-20

CPH2550

CLH 30M8-20

CPH2555

CLH 35M6-20

CPH2560

CLH 35M8-20

CPH2565

CLH 40M6-20

CPH2570

CLH 40M8-20

CPH2575

CLH 45M6-20

CPH2580

CLH 45M8-20

CPH2585

CLH 50M6-20

CPH2590

CLH 50M8-20

CPH2610

CLH 30M8-30

CPH2615

Ch (mm)

øD

(mm)

Height (H) (mm)

ø 20

50 30

ø 30 55

Flexural strength

OEM AUTOMATIC

ISO – Insulators in polyamide file No. 300607

• Insulation: Polyamide 66 reinforced with 30% fiberglass

• Halogen free • Self-extinguishing: UL94-V0

Part number

Reference

ISO2000 ISO2005 ISO2007 ISO2010 ISO2015 ISO2020 ISO2025 ISO2030 ISO2035 ISO2040 ISO2045 ISO2046

ISO 15M4 UL ISO 20M4 UL ISO 20M5 UL ISO 20M6 UL ISO 25M5 UL ISO 25M6 UL ISO 30M6 UL ISO 30M8 UL ISO 35M6 UL ISO 35M8 UL ISO 35M10 UL ISO 35M8W UL

ISO2048

ISO 35M10W UL

ISO2050 ISO2055 ISO2060 ISO2061 ISO2063 ISO2065 ISO2070 ISO2075 ISO2076 ISO2078 ISO2080 ISO2085 ISO2090 ISO2091 ISO2093 ISO2094 ISO2095 ISO2100 ISO2101 ISO2103 ISO2105

ISO 40M6 UL ISO 40M8 UL ISO 40M10 UL ISO 40M8W UL ISO 40M10W UL ISO 45M6 UL ISO 45M8 UL ISO 45M10 UL ISO 45M8W UL ISO 45M10W UL ISO 50M6 UL ISO 50M8 UL ISO 50M10 UL ISO 50M10W UL ISO 50M12W UL ISO 55M10 UL ISO 60M8 UL ISO 60M10 UL ISO 70M10 UL ISO 70M12 UL ISO 75M12 UL

ISO2110

ISO 75M16 UL

ISO2112 ISO2115 ISO2117

ISO 80M12 UL ISO 100M12 UL ISO 100M16 UL

www.oem.co.uk

• Glow wire test: 960° C • Threaded inserts: Galvanized steel • Rated voltage: 1000 V AC/1500 V DC • Working temperature: -40…130 °C

Height (H) (mm)

Ch (mm)

øD (mm)

E (mm)

Thread size

F (mm)

Torque (Nm)

RT (daN) Tensile strength

Compressive strength

RC (daN)

RF (daN)

ø 12

ø 15

ø 26

ø 28

ø 35

M4 M4 M5 M6 M5 M6 M6 M8 M6 M8 M10 M8

5 5 5 5 8 8 9 9 11 11 11 11

3 3 6 8 6 10 10 25 10 25 50 25

150 200 200 250 400 400 800 800 900 900 900 1100

1500 2000 2000 2000 2500 2500 7500 7500 6500 6500 6500 11000

100 100 150 200 200 200 500 500 570 570 570 650

M10

1100

11000

650

ø 28

ø 40

ø 33

ø 41

10.5

ø 29

ø 40

ø 45

ø 42

ø 50

ø 35

11.5

M6 M8 M10 M8 M10 M6 M8 M10 M8 M10 M6 M8 M10 M10 M12 M10 M8 M10 M10 M12 M12

11 11 11 11 11 15 15 15 15 15 15 15 15 15 15 15 15 15 25 25 25

10 25 50 25 50 10 25 50 25 50 10 25 50 50 85 50 25 50 50 85 85

1300 1300 1300 1500 1500 1600 1600 1800 2000 2000 1500 1600 1800 2000 2000 2200 2200 2200 2200 2500 2000

7500 7500 7500 12000 12000 9000 9000 9000 14000 14000 10000 10000 10000 13000 13000 15000 15000 15000 18000 18000 12000

500 500 500 600 600 650 650 700 800 800 400 450 650 750 850 1000 900 900 900 1200 750

M16

200

2000

12000

750

ø 50

100

ø 50

M12 M12 M16

25 25 25

85 85 200

2500 3000 3000

18000 20000 20000

1200 1000 1000

Flexural strength

ISO – Spacing columns in polyamide TECHNICAL FEATURES

• Insulation: Polyamide 6.6 reinforced

• Glow wire test: 960° C • Threaded inserts: Galvanized steel • Rated voltage: 1000 V AC/1500 V DC • Working temperature: -40…130 °C

with 30% fiberglass

• Halogen free • Self-extinguishing: UL94-V0

Part number

Reference

ISO2120 ISO2125 ISO2130 ISO2135 ISO2140 ISO2145 ISO2150 ISO2155 ISO2160 ISO2165 ISO2170 ISO2175 ISO2180 ISO2185 ISO2190 ISO2195 ISO2200 ISO2205 ISO2210 ISO2215 ISO2220 ISO2225 ISO2230 ISO2235 ISO2240 ISO2245 ISO2250 ISO2255 ISO2256 ISO2257 ISO2260 ISO2265 ISO2266 ISO2267 ISO2270 ISO2275 ISO2280 ISO2285 ISO2290 ISO2295

CLN 16M4-20 CLN 16M5-20 CLN 16M6-20 CLN 20M5-20 CLN 20M6-20 CLN 25M4-20 CLN 25M5-20 CLN 25M6-20 CLN 25M8-20 CLN 30M5-20 CLN 30M6-20 CLN 30M8-20 CLN 35M5-20 CLN 35M6-20 CLN 35M8-20 CLN 40M5-20 CLN 40M6-20 CLN 40M8-20 CLN 45M5-20 CLN 45M6-20 CLN 45M8-20 CLN 50M5-20 CLN 50M6-20 CLN 50M8-20 CLN 30M6-30 CLN 30M8-30 CLN 35M6-30 CLN 35M8-30 CLN 40M6-30 CLN 40M8-30 CLN 45M6-30 CLN 45M8-30 CLN 50M6-30 CLN 50M8-30 CLN 55M6-30 CLN 55M8-30 CLN 65M6-30 CLN 65M8-30 CLN 70M6-30 CLN 70M8-30

Ch (mm)

øD (mm)

Height (H) (mm) 16 20

30 21

ø 20 35

50 30 35 40 45 30

ø 30 50 55 65 70

Thread size

F (mm)

Torque (Nm)

RT (daN) Tensile strength

Compressive strength

RC (daN)

RF (daN)

M4 M5 M6 M5 M6 M4 M5 M6 M8 M5 M6 M8 M5 M6 M8 M5 M6 M8 M5 M6 M8 M5 M6 M8 M6 M8 M6 M8 M6 M8 M6 M8 M6 M8 M6 M8 M6 M8 M6 M8

5 5 5 5 5 5 5 5 5 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 11 11 11 11 11 11 15 15 15 15 15 15 15 15 15 15

3 6 6 6 8 3 6 8 25 6 10 25 6 10 25 6 10 25 6 10 25 6 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25

200 300 350 400 450 300 400 550 550 700 700 700 700 800 800 800 800 800 800 800 800 800 800 800 1000 1200 1100 1400 1100 1400 1200 1600 1200 1600 1100 1300 950 950 900 900

4200 4200 4200 4500 4500 4700 4700 4700 4700 5000 5000 5000 5000 5000 5000 5000 5000 5000 4700 4700 4700 4500 4500 4500 7000 8000 7500 8500 7500 8500 9000 9000 8000 8000 7500 7500 7000 7000 6500 6500

100 150 150 200 280 150 200 350 350 370 370 370 350 350 350 300 300 300 260 260 260 220 220 220 500 550 500 550 450 480 420 420 380 380 350 350 300 300 280 280

Flexural strength

OEM AUTOMATIC

Earthing and neutral terminals Earthing bars TECHNICAL FEATURES

• Solid brass • Complete with galvanized steel screws with cross head • 1 metre long

MRS 9 x 6

L (mm) 1000

A (mm) 9

MRS 12 x 8

1000

L1 (mm) 50

A (mm) 9

Part number

Reference

MRS1501 MRS1506

B Thread Holes Ø Number of (mm) size (mm) holes Ø 5.2 6 M4 113 M5

Ø 6.5

116

Stripped wire (mm2) 2.5…6

Wire with ferrule (mm2) 1.5…6

Torque (Nm) 2

2.5…16

1.5…10

Stripped wire (mm2) 2.5…6

Wire with ferrule (mm2) 1.5…6

Torque (Nm) 2

Double connection terminals TECHNICAL FEATURES

• Solid brass • Double connection per hole • Dual input up to 50 mm • Complete with galvanized steel screws 2

Part number

Reference

MRS3000

MRS 2x6

L (mm) 102

MRS3005

MRS 2x12

144

Ø 5.5

2.5…6

1.5…6

MRS3010

MRS 2x24

230

120

Ø 5.5

2.5…6

1.5…6

B Holes Ø Number of (mm) (mm) holes 19 Ø 5.5 6

Terminal supports MRS7000/MRS7005

TECHNICAL FEATURES

MRS7010

• Polyamide 6.6 • Self-extinguishing: UL94-V2 • MRS7010: With screw fastening

Part number

Reference

MRS7000

MRS-S 9x6

Box Qty 50

To suit earth bars 9 x 6 mm

C (mm) 22

D (mm) 17.5

E (mm) 31

F (mm) 11

H (mm) 8

d (mm) 4.2

MRS7005

MRS-S 12x8

12 x 8 mm

17.5

4.2

MRS7010

MRS-S 9x19

9 x 19 mm

5.2

www.oem.co.uk

Earthing and neutral terminals Earthing terminals TECHNICAL FEATURES

• High conductivity brass • Direct fixing on copper bar • Increased height when fixed on spacers • M6 fixing screws with M5 galvanised connecting screws Part number

Reference

L (mm)

A (mm)

B (mm)

MRS2000

MRS13x6-20

215

MRS5000

MRS 13x6-50

462

Holes ø (mm) ø 9.1

Number of holes 1

Stripped wire (mm2) 16…35

Wire with ferrule (mm2) 10…35

Torque (Nm) 2

ø 7.0

4…16

2.5…16

ø 5.3

2.5…6

1.5…6

1.5

ø 4.5

1.5…4

0.75…4

1.5

ø 9.1

16…35

10…35

ø 7.0

4…16

2.5…16

ø 5.3

2.5…6

1.5…6

1.5

ø 4.5

1.5…4

0.75…4

1.5

Holes ø (mm) ø 9.1

Number of holes 2x1

Stripped wire (mm2) 16…35

Wire with ferrule (mm2) 10…35

Torque (Nm) 2

ø 7.0

2x7

4…16

2.5…16

ø 5.3

2 x 19

2.5…6

1.5…6

1.5

ø 4.5

2 x 14

1.5…4

0.75…4

1.5

Double earthing terminals TECHNICAL FEATURES

• High conductivity brass • Two rows of connections with blind holes • Connection with cable lug up to 95 mm • Oblong and direct fixing holes • Fixing on spacers and extension 2 connectors • M6 fixing screws with M5 galvanised connecting screws 2

Part number

Reference

L (mm)

A (mm)

B (mm)

MRS3500

MRS 2X41

462

OEM AUTOMATIC

Copper braids TECHNICAL FEATURES

• Electrolytic copper Cu-ETP 99.90% • Bare and tinned copper • Mechanical resistance: Min 200 MPa

Introduction The copper braid is used as a flexible conductor for all electric connection requirements including power earthing and equipotential connections. These are manufactured from several standard wires between ø 0.10 and ø 0.30 mm which are then twined together to form a cord. When more cords are twined together, a small cross-sectioned braid can be created. If required, further secondary cords can be twined to get the desired cross-section. Three types of copper braid: ROUND

FLAT

Manufactured from tightly interwoven cords until they become a full round section.

Manufactured to the same process as the tubular braids but, flattening it between rollers to the desired dimensions. These braids are used for power, earthing, bonding connections and various other power applications.

They are used for power and mass connections when suitably insulated as an alternative to the cables. Compared to insulated cables with the same cross-section the round braids have better flexibility and a higher current. TUBULAR Manufactured from small interwoven cords until they form a tubular structure. The tubular braids are hollow and are used as a protection sleeve for electric cables to prevent any interferences and disturbances.

www.oem.co.uk

The flat braids make flexible connections, which in turn compensate for offsets between elements to be interconnected whilst providing an excellent buffer for when there are vibrations induced. This is generally the case when they are connected to a transformer. If the braid has the same cross-section as the cable or copper bar the braid can take a higher current.

Copper braids Flat tinned copper earthing braids

Part number

Reference

TMS1000 TMS1005 TMS1010 TMS1015 TMS1020 TMS1025 TMS1030 TMS1035 TMS1040 TMS1045 TMS1050 TMS1055 TMS1060 TMS1065 TMS1070 TMS1075 TMS1080 TMS1085 TMS1090 TMS1095 TMS1100 TMS1105 TMS1110 TMS1115 TMS1120 TMS1125 TMS1130 TMS1135 TMS1140 TMS1145

TMS 6-150-6 TMS 6-200-6 TMS 10-150-8 TMS 10-200-8 TMS 10-250-8 TMS 10-300-8 TMS 16-100-8 TMS 16-150-8 TMS 16-200-8 TMS 16-250-8 TMS 16-300-8 TMS 25-150-10 TMS 25-200-10 TMS 25-250-10 TMS 25-300-10 TMS 35-150-10 TMS 35-200-10 TMS 35-250-10 TMS 35-300-10 TMS 50-100-10 TMS 50-150-10 TMS 50-200-10 TMS 50-250-10 TMS 50-300-10 TMS 75-200-10 TMS 75-250-10 TMS 75-300-10 TMS 100-200-12 TMS 100-250-12 TMS 100-300-12

Current (A) 55 55 85 85 85 85 120 120 120 120 120 150 150 150 150 195 195 195 195 250 250 250 250 250 330 330 330 370 370 370

Cross section (mm2) 6 6 10 10 10 10 16 16 16 16 16 25 25 25 25 35 35 35 35 50 50 50 50 50 75 75 75 100 100 100

S (mm) 2.3 2.3 2.8 2.8 2.8 2.8 3.1 3.1 3.1 3.1 3.1 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 4.8 4.8 4.8 4.8 4.8 5.5 5.5 5.5 6.5 6.5 6.5

L (mm) 150 200 150 200 250 300 100 150 200 250 300 150 200 250 300 150 200 250 300 100 150 200 250 300 200 250 300 200 250 300

A (mm) 12 12 17 17 17 17 17 17 17 17 17 25 25 25 25 22 22 22 22 25 25 25 25 25 30 30 30 30 30 30

B (mm) 12 12 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 25 25 25 25 25 30 30 30 30 30 30

ØD (mm) Ø 6.5 Ø 6.5 Ø 8.5 Ø 8.5 Ø 8.5 Ø 8.5 Ø 8.5 Ø 8.5 Ø 8.5 Ø 8.5 Ø 8.5 Ø 10.5 Ø 10.5 Ø 10.5 Ø 10.5 Ø 10.5 Ø 10.5 Ø 10.5 Ø 10.5 Ø 10.5 Ø 10.5 Ø 10.5 Ø 10.5 Ø 10.5 Ø 10.5 Ø 10.5 Ø 10.5 Ø 12.5 Ø 12.5 Ø 12.5

Round tinned copper earthing braids Part number

Reference

TMT1200 TMT1205 TMT1210

TMT 6-150-6 TMT 6-200-6 TMT 10-300-6

Current (A) 55 55 85

Cross section (mm2) 6 6 10

ø D1 (mm) ø4 ø4 ø5

L (mm) 150 200 300

ØD (mm) Ø 6.5 Ø 6.5 Ø 6.5

Tubular braids in tinned copper

Part number

Reference

TSC1000 TSC1005 TSC1010 TSC1015 TSC1020 TSC1025

TSC 4 TSC 10 TSC 16 TSC 25 TSC 35 TSC 50

ø single wire (mm) ø 0.20 ø 0.20 ø 0.20 ø 0.20 ø 0.20 ø 0.20

Box 50 m 50 m 50 m 25 m 25 m 25 m

ø Nom (mm) ø5 ø 10 ø 20 ø 25 ø 30 ø 35

ø Max (mm) ø 10 ø 20 ø 40 ø 50 ø 60 ø 70 OEM AUTOMATIC

Copper braids in coils TECHNICAL FEATURES

• Bare copper Cu-ETP UNI 5649-71 • Tinned copper Cu-ETP UNI 5649-71 • Standard wire 0.20 mm (0.15 mm for 6 and 10 mm cross-sections) • ** Intensity values referred to: Room temperature: 35°C Max. temperature on conductor: 70°C 2

Flat braids Part number tinned copper TPS1000 TPS1005 TPS1010 TPS1015 TPS1020 TPS1025 TPS1030 TPS1035 TPS1040 TPS1045 TPS1050 TPS1055

Reference TPS 10-4 TPS 10-6 TPS 20-10 TPS 20-16 TPS 20-25 TPS 20-30 TPS 20-35 TPS 20-40 TPS 20-50 TPS 20-75 TPS 20-100 TPS 20-120

Part number red copper TPR1000 TPR1005 TPR1010 TPR1015 TPR1020 TPR1021 TPR1025 TPR1026 TPR1030 TPR1035 TPR1040 TPR1045

Reference

Box

TPR 10-4 TPR 10-6 TPR 20-10 TPR 20-16 TPR 20-25 TPR 20-30 TPR 20-35 TPR 20-40 TPR 20-50 TPR 20-75 TPR 20-100 TPR 20-120

25 m 25 m 25 m 25 m 20 m 20 m 20 m 20 m 20 m 20 m 15 m 15 m

**Current (A) 40 55 85 120 150 170 195 210 250 330 370 420

Cross section (mm2) 4 6 10 16 25 30 35 40 50 75 100 120

Thickness (mm) 1.0 1.0 1.5 2.0 2.0 2.4 2.8 3.2 4.0 5.0 5.0 6.0

Width (mm) 8.0 10.0 10.0 16.0 25.0 25.0 25.0 25.0 25.0 30.0 40.0 40.0

Round braids Part number tinned copper TTS1000 TTS1005 TTS1010 TTS1015 TTS1020 TTS1025 TTS1030

Reference TTS 10-6 TTS 20-10 TTS 20-16 TTS 20-25 TTS 20-35 TTS 20-50 TTS 20-100

Part number red copper TTR1000 TTR1005 TTR1010 TTR1015 TTR1020 TTR1025 TTR1030

Reference

Box

TTR 10-6 TTR 20-10 TTR 20-16 TTR 20-25 TTR 20-35 TTR 20-50 TTR 20-100

50 m 50 m 50 m 25 m 25 m 25 m 10 m

**Current (A) 55 85 120 150 195 250 370

Cross section (mm2) 6 10 16 25 35 50 100

Ø (mm) Ø 4.0 Ø 5.0 Ø 6.4 Ø 8.0 Ø 9.5 Ø 11.0 Ø 15.0

Insulated braids in tinned copper (flat) Part number

Reference

Box

TPI1000 TPI1005 TPI1010 TPI1015

TPI 20-16 TPI 20-25 TPI 20-35 TPI 20-50

20 m 20 m 20 m 20 m

**Current (A) 120 150 195 250

Cross section (mm2) 16 25 35 50

Thickness (mm) 2.0 2.0 3.0 3.3

**Current (A) 120 150 195

Cross section (mm2) 16 25 35

Ø (mm) Ø 8.5 Ø 10 Ø 12

Width (mm) 16.0 25.0 25.0 30.0

Insulated braids in tinned copper (round) Part number

Reference

Box

TTI1000 TTI1005 TTI1010

TTI 20-16 TTI 20-25 TTI 20-35

50 m 25 m 25 m

www.oem.co.uk

COFLEX Laminated busbar COFLEX Insulated copper flexible bars The COFLEX flexible bar is the only “bi-colour” flexible bar (patented) available and distinguishes itself with its high flexibility.

COFLEX Added Value

COFLEX is the perfect conductor to connect: •M ain power supply and electrical equipment (switches, disconnectors, etc.)

• Busbars included in cabinets and panel boards • Transformers to busbars COFLEX is designed with electrolytic copper lamina and is covered with a highly resistant and selfextinguishing insulation. The flexible bar guarantees electrical insulation in aggressive environments and withstands temperatures up to 160°C. When using COFLEX compared to standard methods such as cable or plain busbar the connections are made easier due to the number of laminas. Creating holes straight on the lamina is safe and reliable which makes panel board installations easier and quicker. Advantages compared to plain bar:

• Higher current for same cross section • R eduction of material used and dimensions • E asier shaping • C ost and time saving compared to the use of busbar supports or insulators for plain bars

Advantages compared to cable:

• • Reduction of dimensions and lengths for your installation • C ost and time saving compared to the use of Higher current for same cross section

cable terminals

•

Lower electrical resistance without cable terminals

Versions: COFLEX – COFLEX PLUS

• Standard length: 2 – 3 m • L amina width: 9, 13, 15.5, 20, 24, 32, 40, 50, 63, 80, 100 mm • N umber of lamina: From 2 to 12, according to the bars width

• Cross section: From 20 to 1200 mm2 Upon request: Tinned copper lamina; insulation for temperatures up to 125°C

Reference example CFX 4X20X1 Lamina number: n = 4 Lamina width: L = 20 mm Lamina thickness: s = 1 mm

In VS. ΔT In = Rated current A ΔT = Temperature rise °C ΔT = Tf…Ta Tf = Working temperature °C Ta = Room temperature °C Icc…effective short-circuit current for 1 s Icc parametres calculation Initial temperature: 105°C…max working temperature of the conductor Final temperature: 160°C… limit of temperature for PVC insulation compliant with IEC 60724 for cross-sections < 300 mm² 140°C… limit of temperature for PVC insulation compliant with IEC 60724 for cross-sections > 300 mm² Derating coefficient for the use of bars in parallel Number of bars in parallel

2 bars

3 bars

Coefficient to use

÷ 1.8

÷ 2.5

CERTIFICATION PENDING 24

OEM AUTOMATIC

COFLEX Insulated copper flexible bars

TECHNICAL FEATURES Insulation

Conductor

Finished product

• Electrolytic copper: Cu-ETP…EN 13599 • Self-extinguishing PVC UL 94-V0 • Rated voltage: 1000 V AC/1500V DC Lamina thickness: 0.5, 0.8, 1 mm Black colour with coloured line options • • • Working temperature: -40°C…+105°C • Thickness: 2 mm ± 0.2 • Max. elongation: 365% • Hardness: 80 Shore A • Tensile strength: 19 MPa • Dielectric strength: 20 kV/mm 2 Metre length Table of ampacities (A) based on temperature rise ΔT as per IEC 61439-1 Reference room temperature 40°C Part number

Reference

Box QTY

Weight (Kg)

Cross section (mm2)

Icc (kA)

65 °C

CFX1005

CFX 3 x 9 x 0.8

0.5

21.6

1.9

160

Temperature rise ΔT 50 °C 40 °C 30 °C Rated Intensity In (A) 140 125 108

20 °C 89

CFX1020

CFX 6 x 9 w 0.8

0.9

43.2

3.8

285

250

224

194

158

CFX1021

CFX 9 x 9 x 0.8

1.3

64.8

5.6

319

280

250

217

177

CFX1022

CFX 3 x 13 x 0.5

0.45

19.5

1.7

194

170

152

132

108

CFX1023

CFX 6 x 13 x 0.5

0.92

3.4

285

250

224

194

158

CFX1024

CFX 10 x 13 x 0.5

1.41

5.7

376

330

295

256

209

CFX1025

CFX 2 x 15.5 x 0.8

0.68

24.8

2.1

234

205

183

159

130

CFX1035

CFX 4 x 15.5 x 0.8

1.14

49.6

4.3

365

320

286

248

202

CFX1045

CFX 6 x 15.5 x 0.8

1.6

74.4

6.5

456

400

358

310

253

CFX1050

CFX 10 x 15.5 x 0.8

2.52

124

10.8

502

440

394

341

278

CFX1055

CFX 2 x 20 x 1

1.0

3.5

319

280

250

217

177

CFX1060

CFX 3 x 20 x 1

1.37

5.2

399

350

313

271

221

CFX1065

CFX 4 x 20 x 1

1.74

6.9

467

410

367

318

259

CFX1070

CFX 5 x 20 x 1

2.11

100

8.7

490

430

385

333

272

CFX1075

CFX 6 x 20 x 1

2.47

120

10.4

547

480

429

372

304

CFX1076

CFX 8 x 20 x 1

3.21

160

13.9

638

560

501

434

354

CFX1080

CFX 10 x 20 x 1

3.94

200

17.4

730

640

572

496

405

CFX1085

CFX 2 x 24 x 1

1.19

4.2

399

350

313

271

221

CFX1090

CFX 3 x 24 x 1

1.63

6.3

456

400

358

310

253

CFX1095

CFX 4 x 24 x 1

2.07

8.3

536

470

420

364

297

CFX1100

CFX 5 x 24 x 1

2.51

120

10.4

581

510

456

395

323

CFX1105

CFX 6 x 24 x 1

2.94

144

12.5

650

570

510

442

360

CFX1110

CFX 8 x 24 x 1

3.82

192

16.7

781

685

613

531

433

CFX1115

CFX 10 x 24 x 1

4.7

240

20.9

912

800

716

620

506

CFX1120

CFX 2 x 32 x 1

1.56

5.6

467

410

367

318

259

CFX1125

CFX 3 x 32 x 1

2.14

8.3

559

490

438

380

310

CFX1130

CFX 4 x 32 x 1

2.72

128

11.1

627

550

492

426

348

CFX1135

CFX 5 x 32 x 1

3.3

160

13.9

741

650

581

503

411

CFX1140

CFX 6 x 32 x 1

3.89

192

16.7

821

720

644

558

455

CFX1145

CFX 8 x 32 x 1

5.05

256

22.3

992

870

778

674

550

CFX1150

CFX 10 x 32 x 1

6.21

320

22.5

1163

1020

912

790

645

www.oem.co.uk

L Width (mm) 9

15.5

COFLEX Insulated copper flexible bars

TECHNICAL FEATURES Insulation

Conductor

Finished product

• Electrolytic copper: Cu-ETP…EN 13599 • Self-extinguishing PVC UL 94-V0 • Rated voltage:1000 V AC/1500V DC Lamina thickness: 0.5, 0.8, 1 mm Black colour with coloured line options • • • Working temperature: -40°C…+105°C • Thickness: 2 mm ± 0.2 • Max. elongation: 365% • Hardness: 80 Shore A • Tensile strength: 19 MPa • Dielectric strength: 20 kV/mm 2 Metre length Table of ampacities (A) based on temperature rise ΔT as per IEC 61439-1 Reference room temperature 40°C

CFX1155

CFX 2 x 40 x 1

1.93

6.9

524

Temperature rise ΔT 50 °C 40 °C 30 °C Rated Intensity In (A) 460 411 356

CFX1160

CFX 3 x 40 x 1

2.66

120

10.4

650

570

CFX1165

CFX 4 x 40 x 1

3.38

160

13.9

741

650

581

503

411

CFX1170

CFX 5 x 40 x 1

4.1

200

17.4

884

775

693

600

490

CFX1175

CFX 6 x 40 x 1

4.83

240

20.9

986

865

774

670

547

CFX1180

CFX 8 x 40 x 1

6.27

320

22.5

1180

1035

926

802

655

CFX1185

CFX 10 x 40 x 1

7.72

400

28.1

1343

1178

1054

912

745

Part number

Reference

Box QTY

Weight (Kg)

Cross section (mm2)

Icc (kA)

65 °C

510

442

20 °C

L Width (mm)

291 360

CFX1190

CFX 3 x 50 x 1

3.3

150

672

589

527

456

373

CFX1195

CFX 4 x 50 x 1

4.2

200

17.4

886

777

695

602

491

CFX1200

CFX 5 x 50 x 1

5.1

250

21.7

1055

925

827

717

585

CFX1205

CFX 6 x 50 x 1

6.0

300

22.1

1186

1040

930

806

658

CFX1210

CFX 8 x 50 x 1

7.8

400

28.1

1357

1190

1064

922

753

CFX1215

CFX 10 x 50 x 1

9.61

500

35.1

1573

1380

1234

1069

873

CFX1220

CFX 3 x 63 x 1

4.13

189

16.4

941

825

738

639

522

CFX1225

CFX 4 x 63 x 1

5.27

252

21.9

1083

950

850

736

601

CFX1230

CFX 5 x 63 x 1

6.4

315

22.1

1209

1060

948

821

670

CFX1235

CFX 6 x 63 x 1

7.53

378

26.6

1391

1220

1091

945

772

CFX1240

CFX 8 x 63 x 1

9.8

504

35.4

1596

1400

1252

1084

885

CFX1245

CFX 10 x 63 x 1

630

44.3

1841

1615

1444

1251

1021

CFX1250

CFX 3 x 80 x 1

5.22

240

20.9

1138

998

893

773

631

CFX1255

CFX 4 x 80 x 1

6.66

320

22.5

1311

1150

1029

891

727

CFX1260

CFX 5 x 80 x 1

8.09

400

28.1

1429

1280

1145

991

810

CFX1265

CFX 6 x 80 x 1

9.53

480

33.7

1602

1405

1257

1088

889

CFX1270

CFX 8 x 80 x 1

12.4

640

1833

1608

1438

1246

1017

CFX1275

CFX 10 x 80 x 1

15.3

800

56.2

2028

1779

1591

1378

1125

CFX1280

CFX 4 x 100 x 1

8.3

400

28.1

1420

1245

1114

964

787

CFX1285

CFX 5 x 100 x 1

10.1

500

35.1

1750

1535

1373

1189

871

CFX1290

CFX 6 x 100 x 1

11.9

600

42.2

1915

1680

1503

1301

1063

CFX1295

CFX 8 x 100 x 1

15.5

800

56.2

2172

1905

1704

1476

1205

CFX1300

CFX 10 x 100 x 1

19.1

1000

70.3

2394

2100

1878

1627

1328

CFX1305

CFX 12 x 100 x 1

22.6

1200

84.3

2600

2280

2039

1766

1442

100

OEM AUTOMATIC

COFLEX PLUS COFLEX Plus is designed to be manufactured for high performance TECHNICAL FEATURES Conductor

• Tinned electrolytic copper:

Cu-ETP…EN 13599 Lamina thickness: 0.5, 0.8, 1 mm

Insulation

• TPE compound • Halogen free, low smoke • Self-extinguishing UL 94-V0 • Black colour with coloured line options • Thickness: > 1.6 mm • Typical elongation: 550% • Hardness: 80 Shore A • Tensile strength: 6 MPa • Recycable

Finished product

• Rated voltage: 1000 V AC / 1500V DC • Working temperature: -40°C…+105°C CERTIFICATION PENDING

COFLEX PLUS is manufactured by using tinned electrolytic copper lamina and is insulated with a high-performance polymer. The COFLEX Plus has the same electrical conduction and flexibility as the standard COFLEX bar. The high-performance bar is halogen free, flame resistant and grants low smoke emissions. The bar itself offers unique solution to increase the reliability of the electrical connection and the safety of electrical equipment. COFLEX COLOUR: The unique bi-colour insulation finish (patented) improves connections aesthetics, making their identification from one another easier when in use. The coloured lines (standard white for CoFlex and light blue for CoFlex Plus) on request might be released with different colours to identify phases or simply match a desired aesthetic. The lines can be customised in colour to meet certain requirements.

COFLEX PACKAGING: Made in pressed carton with high rigidity it prevents the bars from flexing and supports them in any leaning position. The bar can be stored both horizontally and vertically even in a small space, thanks to its rectangular shape.

Part number identifier COFLEX Part number

COFLEX PLUS Part number

Insulated flexible bar 5 x 20 x 1 - length 2 m

CFX1070

CFX5070

Insulated flexible bar 5 x 20 x 1 - length 3 m

CFX3070

CFX6070

Size

Upon request: Red copper lamina

www.oem.co.uk

Braided shunts TECHNICAL FEATURES

ADVANTAGES

Insulation

• Improved flexibility compared to cable with similar cross-section • No cable to cut and measure • Volume reduction inside the panel board leading to weight reduction • No stripping of cable heads • No lugs to purchase which means no crimping is required • Excellent electrical parameters • Improved contact surface • I mproved ampacity at equal cross-sections compared to a cable and/or reduced

• • Flammability class: V0 • Colour: black • Thickness - 2 mm

Self-extinguishing PVC UL 94-V0

Finished product

• Dielectric rigidity: 20 kV/mm • Rated voltage: 1000 V AC/1500 V DC • Working temperature: -40°C … +105°C

cross-sections at the same rated current

• • Excellent short-circuit handling

Reduction in heat due to the lack of crimped connections and to higher ampacities

Conductor

• Tinned electrolytic copper braid Cu-ETP 99.90% • Standard wire: 0.20 mm • Terminal in tinned copper tube

J Link Plus High safety performance with J-LINK PLUS is equipped with halogen free insulation, flame retardant, low smoke emission and offers high flexibility. Range Cross-sections: 25 mm² - 35 mm² – 50 mm² – 120 mm² – 240 mm² Lengths: from 230 mm to 1030 mm Rated ampacity: from 125 A to 630 A Table of ampacities (A) based on the switch ampacity or on the T temperature rise as per standard IEC 61439-1 Reference room temperature 40°C Derating coefficient for use of J-LINK in parallel

Cross-section (mm²)

2 bars

3 bars

÷ 1.70

÷ 2.00

÷ 1.70

÷ 2.00

÷ 1.70

÷ 1.95

120

÷ 1.65

÷ 1.85

240

÷ 1.55

÷ 1.75

J-LINK PLUS is recognizable from the light blue line.

• Halogen free insulation • TPE compound • Halogen free • Low smoke • Self-extinguishing UL 94-V0 • Thickness: 2 mm

Upon request, colours can be changed to identify the phases, and to suit different application requirements as well as corporate aesthetic.

J-LINK Added Value

HIGH FLEXIBILITY 28

IDENTIFICATION LINES

TIME SAVING OEM AUTOMATIC

Braided shunts cross section 25 mm² J-Link Part number

Reference

L (mm)

B (mm)

H (mm)

L1 (mm)

L2 (mm)

ø d1 (mm)

ø d2 (mm)

s (mm)

JLK1000 JLK1005 JLK1010 JLK1015 JLK1020 JLK1021 JLK1022 JLK1023 JLK1024

JLK 25-230 JLK 25-330 JLK 25-430 JLK 25-530 JLK 25-630 JLK 25-730 JLK 25-830 JLK 25-930 JLK 25-1030

230 330 430 530 630 730 830 930 1030

20 20 20 20 20 20 20 20 20

7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5

ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5

ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5

4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3

J-Link Plus Part number

Reference

L (mm)

B (mm)

H (mm)

L1 (mm)

L2 (mm)

ø d1 (mm)

ø d2 (mm)

s (mm)

JLK5000 JLK5005 JLK5010 JLK5015 JLK5020 JLK5021 JLK5022 JLK5023 JLK5024

JLP 25-230 JLP 25-330 JLP 25-430 JLP 25-530 JLP 25-630 JLP 25-730 JLP 25-830 JLP 25-930 JLP 25-1030

230 330 430 530 630 730 830 930 1030

20 20 20 20 20 20 20 20 20

7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5

ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5

ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5

4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3

Rated Intensity In (A) Temperature Rise T 45°C 35°C 225°C

185

175

145

Rated Intensity In (A) Temperature Rise T 45°C 35°C 225°C

185

175

145

Braided shunts cross section 35 mm² Part number

Reference

L (mm)

B (mm)

H (mm)

L1 (mm)

L2 (mm)

ø d1 (mm)

ø d2 (mm)

s (mm)

JLK1025 JLK1030 JLK1035 JLK1040 JLK1045 JLK1046 JLK1047 JLK1048 JLK1049 J Link Plus

JLK 35-230 JLK 35-330 JLK 35-430 JLK35-530 JLK 35-630 JLK 35-730 JLK 35-830 JLK 35-930 JLK 35-1030

230 330 430 530 630 730 830 930 1030

20 20 20 20 20 20 20 20 20

9 9 9 9 9 9 9 9 9

ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5

ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5

4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9

Part number

Reference

L (mm)

B (mm)

H (mm)

L1 (mm)

L2 (mm)

ø d1 (mm)

ø d2 (mm)

s (mm)

JLK5025 JLK5030 JLK5035 JLK5040 JLK5045 JLK5046 JLK5047 JLK5048 JLK5049

JLP 35-230 JLP 35-330 JLP 35-430 JLP 35-530 JLP 35-630 JLP 35-730 JLP 35-830 JLP 35-930 JLP 35-1030

230 330 430 530 630 730 830 930 1030

20 20 20 20 20 20 20 20 20

9 9 9 9 9 9 9 9 9

ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5

ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5

4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9

www.oem.co.uk

Rated Intensity In (A) Temperature Rise T 45°C 35°C 225°C

225

205

170

Rated Intensity In (A) Temperature Rise T 45°C 35°C 225°C

225

205

170

Braided shunts cross section 50 mm² Part number

Reference

L (mm)

B (mm)

H (mm)

L1 (mm)

L2 (mm)

ø d1 (mm)

ø d2 (mm)

s (mm)

JLK1050 JLK1055 JLK1060 JLK1065 JLK1070 JLK1071 JLK1072 JLK1073 JLK1074 J Link Plus

JLK 50-230 JLK 50-330 JLK 50-430 JLK 50-530 JLK 50-630 JLK 50-730 JLK 50-830 JLK 50-930 JLK 50-1030

230 330 430 530 630 730 830 930 1030

20 20 20 20 20 20 20 20 20

9 9 9 9 9 9 9 9 9

ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5

ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5

5 5 5 5 5 5 5 5 5

Part number

Reference

L (mm)

B (mm)

H (mm)

L1 (mm)

L2 (mm)

ø d1 (mm)

ø d2 (mm)

s (mm)

JLK5050 JLK5055 JLK5060 JLK5065 JLK5070 JLK5071 JLK5072 JLK5073 JLK5074

JLP 50-230 JLP 50-330 JLP 50-430 JLP 50-530 JLP 50-630 JLP 50-730 JLP 50-830 JLP 50-930 JLP 50-1030

230 330 430 530 630 730 830 930 1030

20 20 20 20 20 20 20 20 20

9 9 9 9 9 9 9 9 9

ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5 ø 8.5

ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5

5 5 5 5 5 5 5 5 5

Rated Intensity In (A) Temperature Rise T 45°C 35°C 225°C

280

250

220

Rated Intensity In (A) Temperature Rise T 45°C 35°C 225°C

280

250

220

Braided shunts cross section 120 mm²

Part number

Reference

L (mm)

B (mm)

H (mm)

L (mm)1

L2 (mm)

ø d1 (mm)

ø d2 (mm)

s (mm)

JLK1075 JLK1080 JLK1085 JLK1090 JLK1095 JLK1096 JLK1097 JLK1098 J Link Plus

JLK 120-330 JLK 120-430 JLK 120-530 JLK 120-630 JLK 120-730 JLK 120-830 JLK 120-930 JLK 120-1030

330 430 530 630 730 830 930 1030

30 30 30 30 30 30 30 30

11 11 11 11 11 11 11 11

15 15 15 15 15 15 15 15

ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5

7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5

Part number

Reference

L (mm)

B (mm)

H (mm)

L1 (mm)

L2 (mm)

ø d1 (mm)

ø d2 (mm)

s (mm)

JLK5075 JLK5080 JLK5085 JLK5090 JLK5095 JLK5096 JLK5097 JLK5098

JLP 120-330 JLP 120-430 JLP 120-530 JLP 120-630 JLP 120-730 JLP 120-830 JLP 120-930 JLP 120-1030

330 430 530 630 730 830 930 1030

30 30 30 30 30 30 30 30

11 11 11 11 11 11 11 11

15 15 15 15 15 15 15 15

ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5

7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5

Rated Intensity In (A) Temperature Rise T 45°C 35°C 225°C

440

400

335

Rated Intensity In (A) Temperature Rise T 45°C 35°C 225°C

440

400

335

OEM AUTOMATIC

Braided shunts cross section 240 mm² Part number

Reference

L (mm)

B (mm)

H (mm)

L1 (mm)

L2 (mm)

ø d1 (mm)

ø d2 (mm)

s (mm)

Rated Intensity In (A) Temperature Rise T 45°C 35°C 225°C

JLK1100 JLK1105 JLK1110 JLK1115 JLK1120 JLK1125 JLK1130 JLK1135 J Link Plus

JLK 240-330 JLK 240-430 JLK 240-530 JLK 240-630 JLK 240-730 JLK 240-830 JLK 240-930 JLK 240-1030

330 430 530 630 730 830 930 1030

35 35 35 35 35 35 35 35

32 32 32 32 32 32 32 32

16 16 16 16 16 16 16 16

ø 12.5 ø 12.5 ø 12.5 ø 12.5 ø 12.5 ø 12.5 ø 12.5 ø 12.5

ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5

12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5

730

Part number

Reference

L (mm)

B (mm)

H (mm)

L1 (mm)

L2 (mm)

ø d1 (mm)

ø d2 (mm)

s (mm)

Rated Intensity In (A) Temperature Rise T 45°C 35°C 225°C

JLK5100 JLK5105 JLK5110 JLK5115 JLK5120 JLK5125 JLK5130 JLK5135

JLP 240-330 JLP 240-430 JLP 240-530 JLP 240-630 JLP 240-730 JLP 240-830 JLP 240-930 JLP 240-1030

330 430 530 630 730 830 930 1030

35 35 35 35 35 35 35 35

32 32 32 32 32 32 32 32

16 16 16 16 16 16 16 16

ø 12.5 ø 12.5 ø 12.5 ø 12.5 ø 12.5 ø 12.5 ø 12.5 ø 12.5

ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5 ø 10.5

12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5

730

www.oem.co.uk

680

565

Whiteacres Whetstone Leicester LE8 6ZG Tel +44 (0) 116 284 9900 panel@oem.co.uk www.oem.co.uk