8
1-800-752-4626
www.increte.com
1-800-752-4626
www.increte.com
9
10
1-800-752-4626
www.increte.com
1-800-752-4626
www.increte.com
11
12
1-800-752-4626
www.increte.com
1-800-752-4626
www.increte.com
13
14
1-800-752-4626
www.increte.com
1-800-752-4626
www.increte.com
15
16
1-800-752-4626
www.increte.com
1-800-752-4626
www.increte.com
17
18
1-800-752-4626
www.increte.com
1-800-752-4626
www.increte.com
19
20
1-800-752-4626
www.increte.com
1-800-752-4626
www.increte.com
21
22
1-800-752-4626
www.increte.com
1-800-752-4626
www.increte.com
23
24
1-800-752-4626
www.increte.com
1-800-752-4626
www.increte.com
25
HARDENER & RELEASES Color Hardener
Color Release
INCRETE SYSTEMS’ Color Hardener is a ready-to-use dry-shake powder used to color and harden freshly placed concrete for stamping and other decorative surfaces.
INCRETE SYSTEMS’ Color Release is formulated to provide a barrier between stamping tools and wet concrete to prevent suction and facilitate the release of flexible stamping tools.
Color Hardener is comprised of a pre-tested cement, hard, wear-resistant specially-graded silica quartz aggregate, finely ground alkali and light fast inorganic coloring pigments, and other propriety components which improve the finished concrete surface. Color Hardener builds in color and durability increasing the surface strength to over 8000 psi.
Applied directly to the wet concrete surface prior to stamping, Color Release contains integrated iron-oxide pigments to add color and depth to a stamped surface. Available in Increte Systems’ 30 standard colors, Color Release is also available in light and dark gray or brown, and clear. Special colors can be matched by request.
Color Hardener provides: a more uniform and intensely colored surface; an easy-to-clean surface that is resistant to grease, oil, and water penetration; greater resistance to weathering, freezing and thawing, and scaling from alkali salts. Color Hardener may be used both indoors and out and is recommended for floor surfaces subject to medium to heavy duty use such as shopping centers, hotels/motels, garages, schools, sidewalks, driveways and parking lots.
Greater Stamping Efficiency Releases Stamping Tools Adds Color & Depth. Unlimited Design Options For Complete Selection Of Standard Colors, See Pages 42 Item #
Colors
See Colors-
Uniform Color Decreases Maintenance UV & Alkali Resistant Increases Durability
For Complete Selection Of Standard Colors, See Page 42 Item #
Colors
Size
See Colors 30 Standard Colors 60 LB. (27.3 kg) Pail Custom Colors/Color Matching. Available in bags upon request.
26
1-800-752-4626
30 Standard Colors
Size 20 LB. (9.1kg) Pail
Antique Release Antique Release, like Color Release is formulated to provide a barrier between stamping tools and wet concrete to prevent suction and facilitate the release of flexible stamping tools. For Complete Selection Of Standard Colors, See Pages 42 Item # See Colors
Colors 10 Standard Colors
www.increte.com
Size 35 LB. (16kg) Pail
CONCRETE COLOR SYSTEMS
INTEGRAL COLOR Color-Crete (Powder) TM
COLOR-CRETE powder integral color is an admixture of special synthetic iron-oxide pigments specially formulated to color and beautify concrete. Available in 35 standard colors and exceeding ASTM C979 specifications for integral color, COLORCRETE may be used with all cementitious materials and is designed for use with cast-in-place, slab on grade, precast, tilt-up, pavers and roof tiles. Plus, all colors are light-fast, lime-proof, and completely weather proof assuring permanent colorfast structures. COLOR-CRETE is available in a variety of Batch-Ready disintegrating bags, each containing a precise measurement of pigment to provide totally uniform color and reduce color variations. Batch-Ready Mix Disintegrating Bag UV-Resistant Exceeds ASTM C979 TM
TM
For Complete Selection Of Standard Colors, See Page 42 Item #
Colors
Size
1LB 5LB 25 LB. (.45kg 2.3kg 11.4kg) 35 Std. Colors See Colors Custom Colors and Color Matching Available
Color-Crete
TM
7 for 28
Color-Crete 7 for 28 powder integral color is a pre-measured system packaged in convenient disintegrating plastic bags that achieves 28 shades with variable loadings for 7 standard integral base colors. For Complete Selection Of Standard Colors, See Page 42 Item # Colors Size See Colors
7 Standard Colors
6 LB (2.7kg) Bag
1-800-752-4626
Color-Crete
TM
(Pre-Packaged Liquid) INCRETE SYSTEMS’ COLOR-CRETE liquid integral color is a water-based, ready-to-use pigmented slurry of special synthetic iron-oxide pigments. Produced using a computer-controlled blending of precisely premixed liquid components, COLOR-CRETE liquid is formulated from the same superior grade pigments as COLOR-CRETE powder and provides the high tinting strength and uniform color that exceeds ASTM C979 specifications for integrally colored concrete. COLOR-CRETE may be used with all cementitious materials and designed for use with cast-in-place, slab on grade, precast, tilt-up, pavers and roof tiles. Plus, all colors are light-fast, lime-proof, and completely weather proof assuring permanent colorfast structures. COLOR-CRETE liquid color is conveniently packaged in one yard increments in 1, 3.5 & 5 gallon pails containing a precisely pigmented slurry accurate to within .02 of a pound to provide uniform color and perfect future batch matching if required. Packaged in convenient 1-yard Increments Dust Free Lime-Proof UV-Resistant Uniform Mixes Exceeds ASTM C979 For Complete Selection Of Standard Colors, See Page 42 Item # Colors Size 35 Standard Colors One-Yard Increments See Colors Custom Colors and Color Matching Available
www.increte.com
27
FINISHING AIDS
FINISHING AIDS INCRETE DELAY Increte Delay forms a monomolecular invisible film to prevent the rapid loss of moisture from the concrete surface during high temperatures, extreme wind, and low humidity. It reduces the chances of cracking due to these quick drying conditions. Increte Delay negates the need for extra mixing water and aids in the proper application of dry shake-on hardeners. It will not affect the bonding of cures or coatings, nor alter the final color of the concrete.
Item #
Size
LIQUID RELEASE INCRETE SYSTEMS’ Liquid Release is a specially formulated solvent based releasing agent designed to prevent suction between stamping tools and wet concrete to facilitate the release of flexible tools. Used in situations where a dry-shake release is too dusty to use, Liquid Release is ideal for interior use and is fragrence-free and non-irratating to nasal passages. For best results, It is recommended that Liquid Release be sprayed on the underside of the stamping tool prior to stamping. Item #
CIDE G001 000 1 Gal. (3.8L) CIDE G005 000 5 Gal. (18.9L) Pail
CEMENT RETARDER INCRETE SYSTEMS’ Cement Retarder is a specially formulated retardant that delays the set times in cementitious products. Cement Retarder is designed for use with Increte Systems” Increte, Color-Crete, NewCrete, Texture-Crete and Spray-Deck.
Size
CLRB G001 000 1Gal. (3.8L) Can CLRB G005 000 5 Gal. (18.9L) Pail
Trowel Glide TROWEL-GLIDE is an easy-to-use waterbase finishing aid used to smooth concrete finishes and reduce the chance of surface cracking. The use of TROWEL-GLIDE will also create an invisible film to prevent rapid moisture loss from the concrete surface during high temperatures, extreme wind and low humidity. Aids In Creating Smoother Troweled Surfaces Reduces Stickiness Extends Finishing Time
Item #
Size
CCRT G001 000 1 Gal. (3.8L) CCRT G005 000 5 Gal.(18.9L) Pail
28
1-800-752-4626
Item #
Size
CTRG G001 000 1 Gal. (3.8L)
www.increte.com
STAMPED OVERLAY PRODUCTS
STAMPED OVERLAY PRODUCTS Thin-Crete (Tintable) Stamped Overlay Grout
Bond-Crete
TM
Thin-Crete Grout is an easy-to-use tintiable polymer-modified, cementitious-based, single-component grout designed for use on new or worn concrete substrates. Thin-Crete stamped overlay offers the texture, look, feel and durability of stamped concrete. Thin-Crete’s polymer modification provides excellent adhesion, toughness, and long-term durability makng it an ideal solution to renovate or revitalize existing interior or exterior concrete surfaces, and do so without the time and expense of removal. Eliminates Removal Of Existing Structurally Sound Concrete Greater Durability & Surface Strength Single Component Tintable Formula Eco-Friendly formula mixes with water Cures up to 6000psi Ideal for use with concrete stains Item #
Size
Special Order in 50 lb. Pails
CTCG P050 000 50 Lb.(22.7kg)
Custom Order Pre-Colored
Thin-Crete Color Pack TM
Convenient pre-measured color for tinting ThinCrete Grout. Simply add contents into grout when mixing for perfect color everytime. For Complete Selection Of Standard Colors, See Page 42 Item #
Colors
Size
30 Standard Colors 1 Lb. (.45kg) Bag See Colors Custom Colors and Color Matching Available
1-800-752-4626
TM
INCRETE SYSTEMS’ Bond-Crete is a high strength bonding agent with a high solids content for increased durability. Its unique co-polymer penetrates into an existing concrete surface to provide excellent bonding with an overlay grout such as ThinCrete, New-Crete or Micro-Crete. Bond-Crete is the ideal choice for bonding concrete caps, stair facings and anytime a new surface is poured over an existing one. Item #
Size
CBCR G001 000 CBCR G005 000
1 Gal. (3.8L) Bottle 5 Gal. (18.9L) Pail
Antiquing Agent INCRETE SYSTEMS’ Antiquing Agent is a unique coloring agent which, when dissolved in water, provides stunning accents to Thin-Crete or stamped concrete. These colorants are designed to tint grout lines and stamped impressions without affecting the base color of Thin-Crete. While Antiquing Agent is formulated to use with stamped Thin-Crete, it may also be used to highlight any stamped concrete surface prior to sealing.
For Complete Selection Of Standard Colors, See Page 40 Item #
Colors
Size
30 Standard Colors 5 Lb. (2.3kg) Pail See Colors Custom Colors and Color Matching Available
www.increte.com
29
SPRAYED OVERLAY PRODUCTS
SPRAYED OVERLAY PRODUCTS Spray-Deck/ Texture-Crete Grout Spray-Deck Grout is a premixed cement and extra-fine aggregate blended to be used with Spray-Deck/Texture-Crete Resin for maximum strength and durability. Spray-Deck Grout is the perfect solution for covering unsightly concrete surfaces. Spray-Deck Grout when applied as a second layer (Texture-Crete) with pattern stencils (see page 32) can provide the look of brick, tile, cobblestone, and a variety of other patterns. Custom stencils can beused to create specific shapes and custom logos. 5 Standard Colors Premixed For Strength & Durability The Perfect “Cover-Up” Creates a Non-Slip Surface Ideal for use with Concrete Stain
Liquid Dispersion Liquid Dispersion grout colorant contains carefully combined, computer specific combinations of coloring agents to provide a variety of base layers colors for such systems as Increte Systems’ Texture-Crete. Liquid Dispersion grout colorant is UV resistant and will not fade, the prescribed amount of colorant and base grout color is specified on each container. 30 Standard Colors Ready To Add To Grout
For Complete Selection Of Standard Colors, See Page 42 Item # See Colors
Companion Products Spray-Deck/Texture-Crete Resin Increte Weld LV Concrete Stain Liquid Dispersion Pattern Stencils For Complete Selection Of Standard Colors, See Page 43 Item #
Colors
See Colors
5 Standard Colors
Size 50 Lb.(22.7kg) Bag
Increte Weld LV Crack Repair Increte Weld LV Crack Repair is a 2-part, 100% solids moisture insensitive, rapid-cure epoxy compound. It is a low viscosity formulation which develops high strength and high modulus. Item # Size CWEL O010 000
30
10oz. (.6L) Tube
1-800-752-4626
Colors 30 Standard Colors
Size 1 Qt. (.95L) Bottle
Spray-Deck/Texture-Crete Resin Spray-Deck Resin is a specially formulated concentrated co-polymer resin for all Spray-Deck/Texture-Crete Systems. This admixture when added to grout provides high strength and mechanical bond, freeze/thaw resistance, and good chemical resistance. Proven to provide long-term durability for exterior exposure, and can be utilized with a variety of substrates. High Strength and Mechanical Bond Use With A Variety of Substrates Item #
Size
CSDR G001 000 1 Gallon Bottle CSDR G005 000 5 Gallon Pail
www.increte.com
SELF-LEVELING/MICRO-TOPPING/VERTICAL OVERLAY
SELF-LEVELING/MICRO-TOPPING/VERTICAL OVERLAY New-Crete Self-Leveling Grout
Micro-Crete Micro-Topping
Micro-Crete is a single component cementitous polymer resin micro-topping designed for interior and exterior application. MicroCrete’s eco-friendly formula mixes with water for creating a smooth or broomed finish. Curing at 4000psi, Micro-Crete allows re-surfacing of existing, structurallly sound concrete surfaces.
TM
INCRETE SYSTEMS’ New-Crete is an easy-to-use self-leveling polymer-modified, cementitious-based, single-component compound designed for use on structurally sound interior concrete. New-Crete’s acrylic polymer modification promotes excellent adhesion, toughness, and long-term durability. New-Crete offers fast set properties that allow for a walkable surface in as little as 12 hours, and a stainable surface in 24 hours. It is the ideal solution for interior floor resurfacing in preparation for staining with a variety of stains such as Increte’s Stain-Crete, Stone Essence, Concrete Stain or Vibra-Stain. Eliminates Removal Of Existing Concrete Self-Leveling Cures up to 4000psi Walkable In 12 Hours. Stainable In 24 Hours.
Companion Products Stain-Crete Vibra-Stain Stone Essence Concrete Stain Item # CNCR P050 970 CNCR P050 355
Size 50 Lb. (22.7kg) Bag (White) 50 Lb. (22.7kg) Bag (Gray)
1-800-752-4626
Ideal for use with Increte Stains Item #
Colors
CMIC P040 970 CMIC P040 355
White Gray
Size 40 Lb. (18.2kg) Bag 40 Lb. (18.2kg) Bag
Thin-Crete Vertical Grout Thin-Crete Vertical Grout is a single component surfacing compound specially created for application on vertical surfaces. The light weight cementitious dry mixture has been formulated to avoid sagging and running during application on vertical surfaces. Thin-Crete Vertical is both strong and light weight. It can be applied at a thickness of up to 2 inches, offering the ability to create deep textures and natural appearing surfaces without requiring added reinforcement on structurally sound vertical surfaces. Formulated for Vertical use Resists Sagging Strong & Lightweight May be colored with a variety of Increte Systems’ stains Item # Colors Size CTCV P040 420 CTCV P040 355
Light Gray Gray
www.increte.com
40 Lb. (18.2kg) Bag 40 Lb. (18.2kg) Bag
31
STAINS & DYES
STAINS & DYES Stone Essence
Stain-Crete (Acid Stain) Increte Systems’ STAIN-CRETE Acid Stain is a deep penetrating acid-based chemical stain that can be used to color old or new concrete (which has cured for a minimum of 14-28 days). STAIN-CRETE chemically reacts with cured concrete, NEWCRETE or MICRO-CRETE to provide a distinctive permanent color with a subtly shaded marbled effect similar to the look of aged natural stone. STAIN-CRETE’s variegated finish will not peel, crack, chip, or fade. Because STAIN-CRETE penetrates so deeply, it can be used for both interior and exterior applications. It can be applied to both horizontal and vertical surfaces giving an attractive custom look to any masonry surface that, once sealed, is impervious to alkali, salts and salt spray, UV rays, and abrasion. STAIN-CRETE is the ideal choice for residential, commercial or municipal applications such as basement floors and walls, garage floors, sidewalks, driveways, pool decks, restaurants, commercial entrances, pedestrian walkways, and showrooms.
Concentrated Transparent Stain Increte Systems’ eco-friendly Stone Essence Transparent Concrete Stain is a concentrated concrete stain that penetrates to beautify concrete surfaces with the mottled, variegated finish of an acid stain without the negative impact of acid or VOC’s. Ideal for interior or exterior applications, Stone Essence turns ordinary concrete surfaces into elegant and inspiring works of art and an ideal enhancement to any decor or landscape. In addition, as a non-VOC, non-acid product, it can be applied in occupied dwellings with clean-up that’s easy and safe. .
Eco-Friendly Formula Variegated Finish No Acids No VOC’s UV Resistant 1 Quart makes 1 Gallon of Stain
Deep Penetrating Variegated Finish UV & Alkali Resistant Won’t Chip, Peel or Fade
For Complete Selection Of Standard Colors, See Page 43 Item # See Colors See Colors
32
Colors
Size
9 Standard Colors 9 Standard Colors
1 Gal. (3.8L) 5 Gal. (18.9L)Pail
1-800-752-4626
For Complete Selection Of Standard Colors, See Page 43 Item # See Colors
Colors 20 Standard Colors
www.increte.com
Size 1 Qt. (.95L) Bottle
STAINS & DYES
STAINS & DYES Concrete Stain-Sealer
Vibra-Stain Concentrated Dye VIBRA-STAIN is a uniquely blended solution of dyes that is diluted with water to create deeply penetrating vibrant semi-transparent color for concrete surfaces. While it provides rich, deep vivid color, the dilution may be varied to achieve an array of desired shades, and multiple VIBRA-STAIN colors may be combined to offer a limitless palette of possibilities that won’t crack, chip or peel.
INCRETE SYSTEMS’ Concrete Stain is a solvent based stain sealer formulated with special acrylic resins designed to provide deep penetration for all concrete and masonry surfaces. The unique formula protects surfaces with long-lasting durability, resistance to grease and oil stains, will not fade, and is alkali proof. The special resin system is designed to withstand high traffic and wet or dry abrasion. Seals and Protects Easy Maintenance UV & Alkali Resistant Increases Durability
Because VIBRA-STAIN produces brilliant vivid hues it is an ideal choice for use when creating polished interior concrete surfaces. Vibra-Stain may be mixed with water, acetone or alcohol.
Concentrated formula Unlimited Color Possibilities Brilliant, Vivid Colors Ideal for Polished Concrete For interior application only.
Also Available in LOW VOC Formula For Complete Selection Of Standard Colors, See Page 42 Item # Colors Size See Colors See Colors
30 Standard Colors 30 Standard Colors
1 Gal. (3.8L) Pail 5 Gal. (18.9L) Pail
Concrete Stain-Sealer (Water Based) IINCRETE SYSTEMS’ Water Based Concrete Stain offers the beauty of Concrete Stain in an Eco-Friendly water based formula.
For Complete Selection Of Standard Colors, See Page 43 Item # Colors Size See Colors
24 Standard Colors
8 Oz.(.47L) Bottle
1-800-752-4626
For Complete Selection Of Standard Colors, See Page 42 Item # Colors Size See Colors See Colors
30 Standard Colors 30 Standard Colors
www.increte.com
1 Gal. (3.8L) Pail 5 Gal. (18.9L) Pail
33
OVERLAY & ADHESIVE STENCILS
OVERLAY & ADHESIVE STENCILS Overlay Pattern Stencils INCRETE SYSTEMS’ pattern stencils, designed for use with SprayDeck and Texture-Crete, are manufactured from durable polypropylene plastic offering long life and ease of cleaning or single-use paper. Standard patterns come in a variety of styles from brick and tile to random stone and fan designs. Custom patterns available. Stencils are approximately 4’ x 8’.
Self-Adhesive Vinyl Stain and Sandblast Stencils With INCRETE’S large array of self-adhesive stencils you can be sure to find the right design or border style to add beauty, and extra profit, to almost any interior or exterior application. If the job calls for a custom design or logo, our computerized system can scan the image and produce the stencil you require. Vinyl stencils are backed with a non-invasive adhesive that won’t damage existing surfaces, stay firmly in place, and are easily removed to provide crisp clean images whether created with stains or sandblasting. Stencils for staining are available in widths up to 48” (42” image) Sandblast stencil width is 30” (24” image) Larger sizes are are tiled sections.
Consult Stencil Catalog for Standard Patterns. Custom Stencils Available. Item #
Patterns
See Pricing 15 Standard Patterns Custom Logos and Patterns Available
34
Size 4’ x 8’
1-800-752-4626
Item #
Size
See Pricing Varies with Pattern Custom Designs and Logos Available
www.increte.com
SEALERS & PROTECTIVE COATINGS
SEALERS & PROTECTIVE COATINGS Clear Seal (Solvent Based) INCRETE SYSTEMS’ Clear Seal is a pure acrylic crystal clear, nonyellowing sealer. Clear Seal can be used to seal any Increte System, and is excellent for use on all other masonry surfaces. The solvents incorporated into the Clear-Seal formula offer excellent penetration and a breathable film that allows moisture in hardened concrete to evaporate. Clear-Seal is recommended for both interior and exterior surfaces, whenever outstanding abrasion resistance is desired. Seals & Protects Beautifies & Enhances Decorative Surfaces UV & Weather Resistant Improved Wear Resistance Non-Yellowing & Breathable Item #
Size
CCSS G001 000 CCSS G005 000
1 Gal. (3.8L) Can 5 Gal. (18.9L) Pail
Clear Seal (Water Based) INCRETE SYSTEMS’ Clear Seal (Water Based) is an odorless, non-flammable sealer that provides a crystal clear finish. It is the ideal sealer choice for indoor applications, and can be used to seal and protect any Increte Systems surface as well as all other masonry surfaces. Item # Size CCSW G001 000 CCSW G005 000
1 Gallon (3.8L) Can 5 Gallon (18.9L) Pail
1-800-752-4626
Crystal Clear VOC INCRETE SYSTEMS’ Crystal Clear (VOC) is a low viscosity solvent based Wet Look finish sealer that complies with all OTC VOC requirements. Crystal clear, fast drying, and deep penetrating, Crystal Clear (VOC) can be used to seal and protect any Increte Systems surface as well as all other masonry surfaces. Seals & Protects OTC Compliant Super low viscosity
VOC<350g/l
Item #
Size
CCCV G001 000 CCCV G005 000
1 Gal. (3.8L) Can 5 Gal. (18.9L) Pail
Clear Seal 100 VOC* Clear Seal 400 VOC* INCRETE SYSTEMS’ Clear Seal solvent and water-based sealers are also available in two formulas with low VOC contents of less than 100g/l and 400g/l. Both Clear Seal 100 VOC and Clear Seal 400 VOC offer excellent penetration while providing outstanding protection with a beautiful Wet Look finish. *Specially formulated for use in California Clear Seal 100 VOC Clear Seal 400 VOC Item # Size Item # Size CCSO G001 000 1 Gal. (3.8L) CCSO G005 000 5 Gal. (18.9L)
CCSF G001 000 1 Gal. (3.8L) CCSF G005 000 5 Gal. (18.9L)
www.increte.com
35
SEALERS & PROTECTIVE COATINGS
CURE AND SEALS CURE-CRETE
CURE-CRETE PLUS VOC
INCRETE SYSTEMS’ Cure-Crete is specially designed to provide a quality cure and seal while assuring total resistance to yellowing from ultra-violet exposure. Cure-Crete is particularly well suited for curing and sealing exterior architectural concrete.
Item #
Size
CCUR G005 000 5 Gal. (18.9L) Pail CCUR G055 000 55 Gal. (205L) Drum
CURE-CRETE PLUS INCRETE SYSTEMS’ Cure-Crete Plus is a high solids, high viscosity solvent based curing and sealing compound specially designed to cure new concrete. Cure-Crete Plus provides a glossy non-yellowing seal to make the surface resistant to dirt penetration and other staining, and is ideal for interior and exterior application.
Item #
Item #
Size
CCUV G005 000 5 Gal. (18.9L) Pail CCUV G055 000 55 Gal. (205L) Drum
CURE-CRETE WB (Water-Based) INCRETE SYSTEMS’ Cure-Crete WB is a specially formulated nonyellowing water based cure and seal compound for use on new concrete pours as a curing agent. Cure-Crete Water-Based comes in a clear non-pigmented formula and may also be custom blended to match any integral color pour.
Size
CCUP G005 000 5 Gal. (18.9L) Pail CCUP G055 000 55 Gal. (205L) Drum CCUP C001 000 4X1 Gal. (3.8L) Case
36
INCRETE SYSTEMS’ Cure-Crete PLUS VOC is a high solids formula to provide highly efficient moisture retention, strength gain, and excellent protection from liquids, weathering and abrasion. This unique solvent blend delivers the performance benefits of traditional solvent based curing and sealing products while ensuring compliance with VOC regulations.
1-800-752-4626
Item #
Size
CCCR G005 000 5 Gal. (18.9L) Pail (Clear) CCCR G055 000 55 Gal. (205L) Drum
www.increte.com
SPECIALTY COATINGS
SPECIALTY COATINGS High Performance Epoxy-Clear INCRETE SYSTEMS’ High Performance Epoxy is a 100% solids performance coating designed to provide high gloss, high build protection for concrete and masonry surfaces. As a 100% solids coating, High Performance Epoxy has lower solvent odor than typical industrial coating. This feature allows for use in occupied buildings. High Performance Epoxy is chemically resistant, antimicrobial and easily buffable. Both components packaged in a convenient single pail.
High Perf. Epoxy-Pigmented Available in 30 standard colors, INCRETE SYSTEMS’ High Performance Epoxy is a 100% solids performance coating designed to provide high gloss, high build protection for concrete and masonry surfaces. As a 100% solids coating, High Performance Epoxy has lower solvent odor than typical industrial coating. This feature allows for use in occupied buildings. High Performance Epoxy is also easily buffable.
Custom Colors Available. For Complete Selection Of Standard Colors, See Page 42 Item #
Item #
Size
CEPK G003 000
3 Gal. (11.4L) Kit
High Gloss Wax High Gloss Wax is a clear, durable wax that resists surface abuse when properly maintained and leaves a beautifully lusterous finish. Heal mark, stain, and abrasion resistant, Increte’s High Gloss Wax is easily buffable and free from odors and fumes during application. Item # Size CHGW G001 000 CHGW G005 000
1 Gal (3.8L) Bottle 5 Gal (18.9L) Pail
Low Gloss Wax INCRETE SYSTEMS’ Low Gloss Wax is, like Increte’s High Gloss Wax, is a clear, durable wax specially formulated to leave a softer satin finish for surfaces where a high gloss shine is not desired. Item # Size CLGW G001 000
1 Gal. (3.8L) Bottle
1-800-752-4626
Color
See Pricing See Pricing
Size
30 Standard Colors 30 Standard Colors
120 Oz. (7.2L) Kit 15 Gal. (56.7L) Kit
Paver Sealer INCRETE SYSTEMS’ Paver Sealer is a solvent based, acrylic, deep penetrating clear sealer specially formulated for interlocking brick pavers. Paver Sealer provides a glossy new look while reducing staining. Paver Sealer is nonyellowing with excellent UV resistance, very durable, and will not peel or flake when properly applied. Item # Size CPSA G001 000 CPSA G005 000
1 Gal. (3.8L) Can 5 Gal. (18.9L) Pail
Paver Sealer VOC Item # CPSV G001 000 CPSV G005 000
Size 1 Gal.(3.8L) Can 5 Gal. (18.9L) Pail
www.increte.com
37
SPECIALTY COATINGS
SPECIALTY COATINGS Urethane (Kit) INCRETE SYSTEMS’ Urethane is the ultimate gloss finish for interior flooring. This two-component polyester polyurethane is light stable (non-yellowing) while providing superior adhesion and hardness with a chemically cured film that is highly resistant to chemicals, stains and abrasion.
Requires application of an epoxy primer coat.
60% Solids Item #
W/B Urethane Kit (Water Based) INCRETE SYSTEMS’ Water Based Urethane is a two-component urethane coating with excellent wear and adhesion properties. Lowodor and non-yellowing, Water Based Urethane may be applied directly to concrete, however the use of a primer is recommmended. As a top coating Water Based Urethane meets all USDA guidelines for use in federally inspected facilities.
56% Solids
Size
CUSK G001 000
1 Gal. (3.8L) Kit
Item # CUWK G001 000
May be applied directly to Concrete - for optimal results apply an epoxy as primer Size 1 Gal. (3.8L) Kit
Counter-Kote INCRETE SYSTEMS’ Counter-Kote is a Food & Drug Administration compliant surface coating for food contact. CounterKote is a 100% solids clear epoxy system that provides a durable surface with superb resistance to abrasion and chemicals. Counter-Kote can be used on residential and commercial concrete counter, bar, and table tops.
Item # CCKK G002 000
38
Size 2 Gal. (7.6L) Kit
1-800-752-4626
www.increte.com
SPECIALTY CLEANERS
SPECIALTY CLEANERS Grease-A-Way
Solv-Kleen
INCRETE SYSTEMS’ Grease-A-Way is a concentrated degreaser for concrete, stone, and masonry surfaces. This powerful degreasing solution provides a safe and economical means for cleaning up grease and oil stains, wax, and dirt. Grease-A-Way is easily adjusted to match the cleaning strength required.
Item #
Size
CGSA G001 000 CGSA G005 000
1 Gal. (3.8L) 5 Gal. 18.9L) Pail
1-800-752-4626
INCRETE SYSTEMS’ Solv-Kleen is a special blend of solvents designed to clean spills and application equipment from Clear-Seal, pigmented solvent base stains and epoxy coatings.
Item # CSOL G001 000 CSOL G005 000
Size 1 Gal. (3.8L) Can 5 Gal. (18.9L) Pail
www.increte.com
39
MISCELLANEOUS PRODUCTS
MISCELLANEOUS PRODUCTS Densifier/Densifier Plus INCRETE SYSTEMS’ Densifier and Densifier Plus are specially formulated liquid concrete floor hardeners ideal for heavy traffic surfaces. Each is a solution of sodium silicates designed to react with the concrete to seal the pores and chemically harden the surface. Densifier Plus includes lithium and added siliconates to increase water repellency and minimize ASR cracks.
Shur-Grip/Ultra-Grip INCRETE SYSTEMS’ Shur-Grip and Ultra-Grip are finely graded additives for sealers and coatings where increased slip resistance is desired. Each leaves a unique textured durable surface (UltraGrip is slightly greater in particle size creating an increase in the texture of the surface). Both Shur-Grip and Ultra-grip are recommended for indoor and outdoor applications, especially over decorative concrete surfaces where other non-skid materials cannot be used because of their color.
Densifer & Densifier Plus increase abrasion and stain resistance, eliminate dusting, and are permanent integral waterproofers. Densifier Item # Densifier Plus Item # CDSF G001 000 CDSF G005 000
CDSP G001 000 CDSP G005 000
Size 1 Gal. (3.8L) 5 Gal. (18.9L)
Shur-Grip Item #
Ultra-Grip Item #
CSHG P001 000 CSHG P003 000
CULG P001 000 CULG P003 000
Uni-Stripp
Mono-Fiber INCRETE SYSTEMS’ Mono-Fiber adds long term durability and functions as plastic reinforcement intended to reduce the formation of shrinkage cracks in concrete.
Item # CMFC P001 000 CMFC P150 000
40
Size
INCRETE SYSTEMS’ Uni-Stripp is an environmentally safe paint, film and coatings remover designed to remove solvent base thermoplastic acrylic and two component epoxy sealers from concrete surfaces. Uni-Stripp is biodegradable, non-toxic, non-flammable, and non-combustile. In addition, Uni-Stripp also works well in removing stains, varnish, and sealers, as well as epoxies.
Item #
Case of 40 - 1Lb. (.45kg) Bags Case of 40 - 1.5Lb. (.675kg) Bags
1-800-752-4626
Size 1 lb. (.45kg) Pail 3 lb. (1.35kg) Pail
CUNS G001 000 CUNS G005 000
Size 1 Gal. (3.8L) 5 Gal. (18.9L) Pail
www.increte.com
MISCELLANEOUS PRODUCTS
MISCELLANEOUS PRODUCTS Granite Coat Vinyl Chip System
INCRETE SYSTEMS’ Granite Coat Vinyl Chips are part of the Granite Coat epoxy flooring system designed to duplicate the look of terrazo or granite floors. The Granite Coat System consists of a base coat of High Performance Epoxy (Pigmented) a broadcast coat of Granite Coat Vinyl Chips and a finishing top coat of High Performance Epoxy (Clear). The Granite Coat System is ideal for garage floors, basement Granite Coat Kit floors, gamerooms, restaurants, clinic floors, workshop floors as well as lobbies and entryways. The Granite Coat System can be purchased as a kit or as separates.
Wall Form Release INCRETE SYSTEMS’ Wall Form Release is a premium quality water based release which will eliminate concrete build-up and reduces bug holes. Non-residual, non-staining, and VOC compliant, Wall Form Release can be used effectively in all types of weather and resists rain wash-off, and meets Army Corp. of Engineers specifications. Ideal for use with Stone-Crete Formliners, Increte Systems Wall Form Release can also be used with standard concrete forms.
Item #
Size
CFRS G001 000 CFRS G005 000
1 Gal (3.8L) Can 5 Gal. (18.9L) Pail
Stone-Crete Color Spray INCRETE SYSTEMS’ Stone-Crete Color Spray is a pre-mixed cement and pigmented mineral powder blend that is specially formulated for use with the Increte Systems Stone-Crete Architectural Wall System as a simple way to revitalize unsightly concrete wall systems or change color to existing walls. It is ideal as a foundation for use with Increte Stains and other coloring methods.
Available in 6 Standard Color Blends
For Complete Selection Of Standard Colors, See Page 43 Item #
Product
See Colors
Vinyl Chips
Size 20 Lb. (9.1kg) Box
1-800-752-4626
Item #
Color
Size
CWSS P050 000
White
50 Lb. (22.7kg) Bag
CWSS P050 355
Gray
50 Lb. (22.7kg) Bag
www.increte.com
41
42
1-800-752-4626
www.increte.com
1-800-752-4626
www.increte.com
43
44
1-800-752-4626
www.increte.com
1-800-752-4626
www.increte.com
45