Fire Suppression System in Pune - Safe N Secure Fire Systems

Page 1


ABOUT US Safe ‘N’ Secure Fire Systems has gradually emerged as a SYSTEMS INTEGRATORS in the field of “Life safety, Electronic surveillance & Security, and Asset protection” over a period of time. The company was established in the year 2003 by one of the Directors as a proprietor firm. Soon it grew up to become a private limited company. The company is managed by highly qualified management professionals with sufficient qualification in the field of Fire Safety Management & System Design. Our directors have more than sixteen years of experience in the corporate world. Both the directors are post graduate in management. Safe N Secure’s success is based on offering complete customer satisfaction with our concept to offer a “Total Package Solution under one roof”, thus saving your valuable precious time. We offer Outstanding Product Range in all segments, “GREAT SERVICE & SUPPORT”. We are proud to have served over 2500 customers.


FIRE SUPPRESSION SYSTEM

This System is intended to prevent or extinguish fires automatically within seconds, where there is electrical or sensitive electronic equipment serving a critical operation, the loss of which would not only be the value of the equipment but also the cost of business interruption such as caused by damage to Server Room, Data storage room.


NOVEC 1230 SYSTEM Novec 1230 fluid is an environmentally friendly Halon replacement for use as a gaseous Fire Suppression Agent. Novec 1230 fire protection fluid has zero ozone depletion potential, a global warming potential of one, a fiveday atmospheric lifetime, and a large margin of safety for occupied spaces. Novec 1230 fire protection fluid extinguishes fire primarily by removing heat from the fire. It is also electrically non-conductive.


FM 200 SYSTEM 



In response to the impending production phase-out of Halon Fire Extinguishants, FM-200 (Heptafluoropropane) is a replacement for Halon 1301 in applications requiring a clean environmentally acceptable fire extinguishing agent, suitable for use in manned areas. It is a colorless gas at standard conditions, exhibiting a boiling point of -16.4 Degree Centigrade. Through the use of properly designed equipment, FM-200 will mix well in a protected enclosure to provide a homogenous mixture of air. For fire suppression applications, FM-200 is super pressurized to achieve rapid discharge into the protected environment.


CO2 FLOODING SYSTEM Carbon dioxide (CO2) gas has been used as an extinguishing agent in fixed installations since the beginning of the twentieth century. NFPA-12 ( National Fire Protection Association ) Rules and BIS 6382 codes for design of such system are used as standards for CO2 extinguishing systems. These fire extinguishing installations are usually provided on premises where water and foam cannot be used. CO2 can be stored in high-pressure seamless steel cylinders in liquid form with a maximum filling ratio of 0.667 kg/liter of cylinder volume.


FIRE TUBE DETECTION SYSTEM Fire Tube Detection System is a simple self-activating system which can be installed inside closed cabins and machinery housing to detect and extinguish fire automatically at source during the initial stages of the fire. It is ideal for any application where the fire risk is within an enclosure or confined space. Fire Tube puts out the fire at the source by means of a flexible fire detection and delivery tube.


FOAM FLOODING SYSTEM 

The Foam Flooding Systems are similar to Water Mist fire suppression systems but use an expanding foam solution mixed with water to extinguish the fire. Foam suppression systems are useful for companies which cannot afford the expensive tank and pump system to operate the sprinklers or for when there is a particularly high risk of highly flammable liquid which may need cover. Automatic or manual fire detection can be used to release a foam and water mixture which will expand on a release of the agent and give a large fire rating cover without the need for large storage or pump tanks.


ARGONITE SYSTEM 



Argonite has been developed to meet the demands of the industry for an environmentally friendly media. Argonite is nontoxic, non-corrosive, non-fogging and leaves no residue. Argonite meets the challenge from both the Montreal- and Kyoto protocol with no ozone depletion potential or global warming potential. Argonite is tested and approved by regulatory bodies throughout the world and is effective against fires in almost all combustible materials and flammable liquids.


HIGH PRESSURE WATER MIST SYSTEM 

High-Pressure Water Mist System can solve your fire protection needs across a number of platforms spanning the industrial, commercial, mining, marine, chemical, and other markets. High-Pressure Water Mist systems are those with operating pressures of 34.5 bar (500 psi) or greater. Water supply pressure can be provided by a high-pressure pump (120 bar) connected to a tank or continuous water supply or by highpressurenitrogen cylinders (200 bar) driving a number of separate water containers. Mean droplet sizes of these systems are approximately 100-200µ (micron) in diameter and are ideally suited to most applications including Class A hazards.


MEDIUM VELOCITY WATER SPRAY SYSTEM Medium velocity sprayers discharge a water spray of finely divided droplets at medium velocity. They are ideal for protecting hazards involving light oils where emulsification from highvelocity sprayers is not possible. The fine spray has a high heat absorption rate so medium velocity sprayers are an effective method of protecting adjacent plant and structures from heat during a fire by providing a continuous cooling spray over the exposed surfaces. Keeping nearby equipment cool minimizes damage and reduces the risk of explosion.


HIGH VELOCITY WATER SPRAY SYSTEM 

High-velocity systems are often used to protect equipment that incorporates heavy or medium oils equipment such as transformers, circuit breakers, diesel engines and fuel oil storage tanks, turbo alternator lube oil systems and oilfired boilers. The high-velocity nozzles are specifically designed to discharge a jet of water at high speed. The water jet forms a cone of a coarse spray of uniform density which is discharged over a defined area. The coarse spray is able to penetrate the flame zone and reach the surface of the burning oil. The turbulence created by the highvelocity spray forms an oil-in-water emulsion on the surface of the oil that will not burn. This “emulsification” is the principal way the fire is extinguished, along with a cooling and smothering effect.


Contact us: Mail Id: marketing@safensecure.co.in Contact No: 9822402110 Address: Office #7, S No. SV Apartment, Lower Ground Floor, Opp. - Crown Bakery, Kondhwa (BK.), Pune- 411048 Visit us: http://www.safensecureindia.com


THANK YOU..


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.