Components maintenance schedule

WITH SHIMANO SC-EM800 AND SC-E7000 DISPLAYS:

In assemblies with the Shimano SC-EM800 or SC-E7000 displays, the battery(ies) charge level will be shown on the

100% - 81%

80% - 61%

60% - 41%

40% - 21%

20% - 1%

0%

SC-E7000

SC-EM800

COMPATIBLE GARMIN UNITS. ORBEA RS TOOLBOX:

you to access relevant information of your Rise, like the remaining battery level, which is shown as a percentage of

If during an activity the battery level is not visible on Orbea RS Toolbox, the battery level percentage will be visible again when the the EP8 system will communicate the battery level via ANT Private to the Garmin unit and

again (keeping your Garmin device on) to reset the connection and thus see the battery Read how to download and install the Orbea RS Toolbox

ORBEA RS BATTERIES

540Wh internal battery.

The internal battery on Rise H does not have LEDs to dis ternal battery, it must be connected to the pedelec system in order to check the battery level following the methods

Range Extender 252Wh.

Press once the main button of the Orbea RS Range Exten

The Rise Hydro 2022 Range Extender battery is not compatible with Rise Carbon 2021 BLUE PAPER RISE · HYDRO2022 ORBEA | 23 EN

CHARGING THE BATTERIES

Before using the internal battery or the Ran

ORBEA RS 540WH INTERNAL BATTERY

The Rise Hydro Smart Charger is not compatible with the Rise Carbon 2021-2022 internal 2021-2022 charger is not compatible with the

To charge the internal battery on Rise, plug the RS char nected to the bicycle the LED on the charger´s body will The charger´s body LED will turn blue for 2 seconds and then it will start fading in and out cyclically until the battery

When the battery is fully charged, the charger´s body LED

100%

Open the bicycle charging port cover and connect the the charger connector must be aligned with the top part If the charger´s LED lights in red when connecting the charger to the outlet or during the charging process, there is a charging ger and read the charger troubleshooting

ERROR!

24 | ORBEA TECHNICAL MANUAL BLUE PAPER RISE · HYDRO2022 ORBEA | 25 EN

Disconnect the charger from the bicycle´s charging port

While the charger is connected to Rise, the bicycle cannot tery level at a given time, disconnect the charger from the bicycle, turn Rise on, and connect it to your Garmin unit

On assemblies with the Shimano displays, disconnect the charger and power the bicycle on to see the current bat

Avoid leaving the charger connected to the bike continuously for extended periods of time and charge your bicycle or battery in a place where you have visual access to it so the charger can be disconnected if any anomaly is detect

The RS Smart Charger has been designed to stop charging the battery when the charge is completed to avoid recommended to supervise the charge to avoid damages

The lithium-ion batteries are sensitive to temperature dur RS RANGE EXTENDER BATTERY.

The Rise Hydro Smart Charger is not compatible with the Rise Carbon 2021-2022 internal

The Rise Carbon 2021-2022 charger is not compatible with the Rise Hydro internal bat

To charge the Range Extender, plug the RS charger to the ed to the charger, the LED on the charger´s body will blink Disconnect the Range Extender connection cable to the bicycle charging port (in case it is connected) by turning Extender correctly aligning the connector pins with tho body LED will turn blue for 2 seconds and then it will start fading in and out cyclically until the battery is com

When the battery is fully charged, the charger´s body LED When the battery is fully charged, disconnect the charger from the charging port by carefully pulling from the char on the bicycle, connect the Range Extender cable to the Range Extender and the bicycle charging port with the safety tabs open and, once the cable is correctly connected,

100%

While the Range Extender is being charged, the charge · Avoid leaving the charger connected to the bike continuously for extended periods of time and charge your bicycle or battery in a place where you have visual access to it so the charger can be disconnected if any anomaly is

The RS Smart Charger has been designed to stop charging the battery when the charge is completed to avoid recommended to supervise the charge to avoid damages