HYUNDAI WIA F400 CATALOGUE by Grintech

F400/500/650 HYUNDAI WIA Vertical Machining Center

Technical Leader

The Vertical Machining Center F400/500/650 Series, designed by Hyundai WIA with years of expertise and the latest technology, maximizes productivity while maintaining rigidity and accuracy.

F400 Table Size Max.Load Capacity Spindle Taper Spindle RPM Spindle Output No. of Tools Travel (X/Y/Z)

[SIEMENS] mm(in) kg(lb) r/min kW(HP) EA mm(in)

Rapid Traverse Rate m/min(ipm)

1,000×460 (39.4″×18.1″) 600 (1,323) BT40 [BBT40] 8,000 [12,000] [8,000] [8,000] [12,000] 15 (20) [11 (15)] [13.5 (18)] [15.8 (21)] [15.8 (21)] 24 [30] 800/460/520 (31.5″/18.1″/20.5″) 32/32/32 (1,260/1,260/1,260)

F500PLUS Table Size Max.Load Capacity Spindle Taper Spindle RPM Spindle Output No. of Tools Travel (X/Y/Z)

mm(in)

1,200×500 (47.2″×19.7″)

kg(lb)

800 (1,764)

r/min kW(HP) EA mm(in)

Rapid Traverse Rate m/min(ipm)

BBT40 8,000 [10,000] [12,000] 15 (20) [18.5 (25)] [18.5 (25)] 30 1,060/510/635 (41.7″/20.1″/25″) 36/36/30 (1,417/1,417/1,260)

F500/50 Table Size Max.Load Capacity Spindle Taper Spindle RPM Spindle Output No. of Tools Travel (X/Y/Z)

[SIEMENS] mm(in) kg(lb) r/min kW(HP) EA mm(in)

Rapid Traverse Rate m/min(ipm)

1,200×500 (47.2″×19.7″) 800 (1,764) BT50 [BBT50] 6,000 [6,000] 15 (20) [27.8 (37.3)] 24 1,100/510/635 (43.3″/20.1″/25″) 36/36/30 (1,417/1,417/1,260)

F650PLUS Table Size Max.Load Capacity Spindle Taper Spindle RPM Spindle Output No. of Tools Travel (X/Y/Z)

mm(in)

1,600×650 (63″×25.6″)

kg(lb)

1,300 (2,866)

r/min kW(HP) EA mm(in)

Rapid Traverse Rate m/min(ipm)

BBT40 8,000 [10,000] 15 (20) [18.5 (25)] 30 1,400/660/635 (55.1″/26″/25″) 36/36/30 (1,417/1,417/1,260)

F650/50 Table Size Max.Load Capacity Spindle Taper Spindle RPM Spindle Output No. of Tools Travel (X/Y/Z)

[SIEMENS] mm(in) kg(lb) r/min kW(HP) EA mm(in)

Rapid Traverse Rate m/min(ipm)

1,600×650 (63″×25.6″) 1,300 (2,866) BT50 [BBT50] 6,000 [6,000] 15 (20) [27.8 (37.3)] 24 1,400/660/635 (55.1″/26″/25″) 36/36/30 (1,417/1,417/1,260)

The Fastest, the Most Versatile High end Linear Machining Center

F400/500/650 ● High accuracy headstock features a high precision angular contact bearing ● High power, high torque headstock for efficiency and precision in cutting ● Latest Servo ATC implementation for the quickest tool change ● Fast feed rates through the 4 Way Y-axis (F650PLUS, F650/50) ● Roller Guide Way for high accuracy cutting (F500/50, F650/50) ●L atest SIEMENS 828D controls with wide range of supporting software (OPTION : F400, F500/50, F650/50)

F400 Basic Features High Speed & Productivity Vertical Machining Center

F400/500/650

Direct Spindle The directly coupled spindle at a max rev of 12,000rpm, allows high speed machining. Additionally, the large diameter and the thickness of the spindle add stability to the machine.

Double Anchored Ballscrew

In order to eliminate thermal growth and increase accuracy, all axis are driven by high precision double anchored ballscrews. The pretensioned and double anchored design provides outstanding positioning and repeatability with virtually no thermal growth.

Directly Coupled Servo Motor The ballscrews are directly coupled to the servo motor. This eliminates the need for any transmission parts, which may impact machine accuracy and efficiency.

Table & Machining Area ◉ Table Size (X/Y axis) : 1,000/460 mm (39.3″/18.1″) 460 (18.1″)

635 (25″) 150 (5.9″)

100 (3.93″)

600 kg (1,323 lb) 800 (31.4″)

460 (18.1″)

100 (3.93″)

HYUNDAI WIA MACHINE TOOL

Basic Features

01 Vertical Machining Center

◉ Rapid Traverse Rate (X/Y/Z axis) : ◉ Travel (X/Y/Z axis) :

800/460/520 mm (31.5″/18.1″/20.4″)

F400/500/650

32/32/32 m/min (1,260/1,260/1,260 ipm)

04 + 05

High precision & High speed Vertical Machining Center ◉ Spindle Speed : 8,000 [8,000] [12,000] [8,000] [12,000] rpm ◉ Spindle Output (Max./Cont.) : 1 5/11 [15/11] [11/7.5] [13.5/9] [15.8/10.5] kW (20/14.7 [20/15] [15/10] [18/12] [21/14] HP) ◉ Spindle Torque (Max./Cont.) : 9 5/70 [95/70] [70/45] [95/63] [95/63] N.m (70/51.6 [70/51.6] [51.6/33.2] [70/46.5] [70/46.5] lbf.ft) [SIEMENS]

F500PLUS Basic Features High Speed & Productivity Vertical Machining Center

F400/500/650

Double Anchored Ballscrew

Roller Type LM Guide Due to the rigidity of the linear roller guide, the feed rates on the F500PLUS are fast and reduce cutting time.

Directly Coupled Servo Motor The ballscrews are directly coupled to the servo motor. This eliminates the need for any transmission parts, which may impact machine accuracy and efficiency.

Table & Machining Area ◉ Table Size (X/Y axis) : 1,200/500 mm (47.2″/19.6″) 500 (19.6″)

635 (25″)

800 kg (1,764 lb)

150 (5.9″)

70 (2.7″)

1060 (41.7″)

500 (19.6″)

70 (2.7″)

HYUNDAI WIA MACHINE TOOL

Basic Features

Solid Body High Column High column of 150mm(5.9") and 300mm(11.8") is provided.

1,060/510/635 mm (41.7″/20″/25″) F500/50 : 1,100/510/635 mm (43.3″/20″/25″) F500 Plus :

F400/500/650

◉ Travel (X/Y/Z axis)

Vertical Machining Center

◉ Rapid Traverse Rate (X/Y/Z axis) : 36/36/30 m/min (1,417/1,417/1,260 ipm)

03 06 + 07

High precision & High speed Vertical Machining Center ◉ Spindle Speed

F500 Plus :

8,000 [10,000] [12,000] rpm F500/50 : 6,000 [6,000] rpm

◉ Spindle Output (Max./Cont.) F 500PLUS : 15/11 [18.5/15] [18.5/11] kW (20/15 [24.8/20][24.8/15] HP) F500/50 : 15/11[27.8/18.5] kW (20/15 [37.3/24.8] HP) ◉ Spindle Torque (Max./Cont.) F500PLUS : 286/143 [117.6/95.3] [117.7/70] N.m (211/105.5 [86.7/70.3] [70.3/51.6] lbf.ft) F500/50 : 358/179 [294/196] N.m (264/132 [216.8/97.4] lbf.ft) [SIEMENS]

F650PLUS Basic Features High Speed & Productivity Vertical Machining Center

F400/500/650

4 WAY Y-axis

The 4 slide ways on Y-axis eliminate overhang and increase accuracy throughout the full extent of travel.

Double Anchored Ball Screw

Roller Type LM Guide Due to the rigidity of the linear roller guide, the feed rates on the F650PLUS are fast and reduce cutting time.

Directly Coupled Servo Motor The ballscrews are directly coupled to the servo motor. This eliminates the need for any transmission parts, which may impact machine accuracy and efficiency.

Table & Machining Area ◉ Table Size (X/Y axis) : 1,600/650 mm (63″/25.6″) 650 (25.6″)

635 (25″) 150 (5.9″)

100 (3.93″)

1,300 kg (2,866 lb) 1,400 (55.1″)

650 (25.6″)

100 (3.93″)

HYUNDAI WIA MACHINE TOOL

Basic Features

Solid Body High Column

◉ Travel (X/Y/Z axis) : 1,400/660/635 mm (55.1″/25.9″/25″)

F400/500/650

◉ Rapid Traverse Rate (X/Y/Z axis) : 36/36/30 m/min (1,417/1,417/1,260 ipm)

Vertical Machining Center

High column of 300mm(11.8") is provided.

04 08 + 09

03 02 01

High precision & High speed Vertical Machining Center ◉ Spindle Speed

F650PLUS :

8,000 [10,000] rpm

F650/50 :

6,000 [6,000] rpm

◉ Spindle Output (Max./Cont.) F650PLUS : 15/11 [18.5/15] kW (20/15 [24.8/20] HP) F650/50 : 15/11 [27.8/18.5] kW (20/15 [37.3/24.8] HP) ◉ Spindle Torque (Max./Cont.) F650PLUS : 286/143 [117.6/95.3] N.m (211/105.5 [86.7/70.3] lbf.ft) F650/50 : 358/179 [294/196] N.m (264/132 [216.8/97.4] lbf.ft)

F400/500/650

F400 Spindle Long Lasting High Accuracy & Excellent Performance Vertical Machining Center

Direct Type Spindle Direct coupling of the motor and the spindle reduces deceleration time, and provides easy maintenance.

Spindle Cooling The spindle cooling system minimizes thermal displacement which can happen during lengthy machining operations, and offers continued accuracy based on the thermal stability. Axial Movement is Important for Face Contact

Dual Contact Spindle The Big Plus spindle system (BBT40) provides dual contact between the spindle face and the flange face of the tool holder.This greatly increases tool rigidity, reduces run out and adds significant productivity to machining applications.

Before Clamping

After Clamping Clamping

Non Contact

â?&#x2013; The increase in standard diameter improves rigidity and ATC interactive precision, and Z-axis displacement revention further extends tool life.

Contact

Spindle

SIEMENS Spindle

F400 (8,000rpm : Belt, Direct)

F400 (8,000 rpm : Belt)

Torque (N∙m[lbf∙ft])

Power (kW[HP])

HYUNDAI WIA MACHINE TOOL

FANUC Spindle

Torque (N∙m[lbf∙ft])

Power (kW[HP]) 13.5kW[18.1HP] (30min) 9kW[12HP] (Cont.)

11kW[14.7HP] (Cont.) 95[70]

70N∙m[51.6lbf∙ft] (Cont.)

11 [14.7]

95N∙m[70lbf∙ft] (30min)

70 [51.6]

95 [70]

63N∙m[46.5lbf∙ft] (Cont.) 63 [46.5]

1,500

3,500

8,000

500

1,500

Spindle Speed (r/min)

3,500 4,500

8,000

Spindle Speed (r/min)

F400 (12,000 rpm : Direct)

F400 (8,000 rpm : Direct)

Torque (N∙m[lbf∙ft])

Power (kW[HP])

Torque (N.m)

Power (kW)

10 + 11

15.8kW[21HP] (S6-40%)

7.5 [10]

15.8 [21]

11kW[14.7HP] (30min)

11 [14.7]

70N∙m[51.6lbf∙ft] (30min)

10.5kW[14.8HP] (Cont.)

7.5kW[10HP] (Cont.) 70[51.6]

45N∙m[33.2lbf∙ft] (Cont.)

10.5 [14.8]

47 [33.2]

95N∙m[70lbf∙ft] (S6-40%) 95 [70]

63N∙m[46.5lbf∙ft] (Cont.) 63 [46.5]

1,500

Vertical Machining Center

95N∙m[70lbf∙ft] (30min)

F400/500/650

15 [20] 11 [14.7]

16 [21.4]

15kW[20HP] (30min)

7,000

12,000

2,000

Spindle Speed (r/min)

4,000

8,000

Spindle Speed (r/min)

F400 (12,000 rpm : Direct)

Through Spindle Coolant Through Spindle Coolant is exceedingly useful when drilling deep holes. It helps increase the lifetime of the tool, while decreasing cycle time.

Torque (N∙m[lbf∙ft])

Power (kW[HP]) 15.8kW[21HP] (30min) 15.8 [21]

10.5kW[14.8HP] (Cont.) 10.5 [14.8]

❖ F400 8,000rpm Direct Spindle Non Applicable

95N∙m[70lbf∙ft] (30min) 95 [70]

63N∙m[46.5lbf∙ft] (Cont.) 63 [46.5]

20 bar / 30 bar / 70 bar (290 psi / 435 psi / 1,015 psi)

500

2,000

4,000

Spindle Speed (r/min)

12,000

F400/500/650

F500/650 Plus Spindle Long Lasting High Accuracy & Excellent Performance Vertical Machining Center Main Spindle F500/650PLUS applies belt driven spindle which generates less noise and is convenient for maintenance. Also, F500 PLUS provides direct drive spindle as an option which has maximum speed of 12,000rpm. It is designed with highly precise angular ball bearings where the spindle is directly connected with the motor to reduce acc/deceleration time.

Spindle Cooling The spindle cooling system minimizes thermal displacement which can happen during lengthy machining operations and accurate machining is possible based on thermal stability.

F500/650 PLUS Belt Driven Spindle

(Thermal Displacement : 35% improvement, Acc/deceleration : 8.3% improvement) Compared with the previous models, thermal displacement and the acc/ deceleration has been improved by 35% and 8.3% respectively. It enhances machining ability with reduced non-cutting time so it is possible to machine highly precise products.

Belt Damage Alarm System F500/650 PLUS features a unique alarm system that activates when the belts on the main spindle are damaged. It increases machining stability. Axial Movement is Important for Face Contact

Dual Contact Spindle(F500/50 | F650/50 :

)

The Big Plus spindle system (BBT40) provides dual contact between the spindle face and the flange face of the tool holder.This greatly increases tool rigidity, reduces run out and adds significant productivity to machining applications.

Before Clamping

After Clamping Clamping

Non Contact

Contact

â?&#x2013; The increase in standard diameter improves rigidity and ATC interactive precision, and Z-axis displacement revention further extends tool life.

Through Spindle Coolant Through Spindle Coolant is exceedingly useful when drilling deep holes. It helps increase the lifetime of the tool, while decreasing cycle time.

20 bar / 30 bar / 70 bar

(290 psi / 435 psi / 1,015 psi)

7.5 [10]

18.5kW[24.8HP] (30min) 117.6N∙m[86.7lbf∙ft] (30min)

18.5 [24.8]

286N∙m[211lbf∙ft] (30min) 11kW[14.7HP] (Cont.)

286 [211]

143N∙m[105.5lbf∙ft] (Cont.)

Torque (N∙m[lbf∙ft])

Power (kW[HP])

15kW[20HP] (30min)

15[20]

11[14.7]

F500/650 Plus (10,000 rpm Belt)

Torque (N∙m[lbf∙ft])

15[20]

95.3N∙m[70.3lbf∙ft] (Cont.)

15kW[20HP] (Cont.)

117.6 [86.7] 95.3 [70.3]

Vertical Machining Center

F500/650 Plus (8,000 rpm Belt) Power (kW[HP])

HYUNDAI WIA MACHINE TOOL

Spindle

143[105.5]

18[13.3] 9[6.6] 0

500 750

Spindle Speed (r/min)

6,000

8,000

F500 Plus (12,000 rpm Direct) Power (kW[HP])

1,500

10,000

Spindle Speed (r/min)

F500/50, F650/50 (6,000 rpm Belt)

Torque (N∙m[lbf∙ft])

Power (kW[HP]) 358N∙m[264lbf∙ft] (30min)

18.5 [24.8] 15[20]

11[14.7]

18.5kW[24.8HP] (S3 25%) 117.7N∙m[86.8lbf∙ft] (S3 25%) 15kW[20HP] (S3 60%)

117.6 [86.7]

95.5N∙m[70.4lbf∙ft] (S3 60%) 11kW[14.7HP] (Cont.) 70N∙m[51.6lbf∙ft] (Cont.)

1,500

Spindle Speed (r/min)

10,000

F400/500/650

95[70]

15[20]

358 [264]

179N∙m[132lbf∙ft] (Cont.) 15kW[20HP] (30min)

179 [132]

11kW[14.7HP] (Cont.)

95.3 11[14.7] [70.3] 7.5 [10]

12,000

400 600

Spindle Speed (r/min)

F500/50, F650/50 (6,000 rpm Belt) The 1PH8 Series is a high quality performance motor providing concentricity of 10㎛ and fast response time. They operate smoothly in extreme environments such as high temperature, dust and dirt. Heat emission minimizing design makes it possible to maintain a degree of accuracy at all time.

27.8kW[37.3HP] (S6-40%)

27.8 [37.3] 18.5 [24.8]

18.5kW[24.8HP] (Cont.) 294N.m[216.8lbf∙ft] (S6-40%) 196N.m[144.5lbf∙ft] (Cont.)

6,000

Torque (N∙m[lbf∙ft])

Power (kW[HP])

1PH8 Spindle Motor

4,800

1,500

Spindle Speed (r/min)

294 [216.8] 196 [144.5]

4,000

6,000

12 + 13

F400/500/650

24 Tool Magazine

ATC & Magazine High Productivity Achieved with Rigidity and Accuracy in Machining

30 Tool Magazine

◉N o. of Tools : F400 : 24 [30] EA

F500/650 Plus : 30 EA ◉T ool Shank F400 : BT40 [BBT40]

F500/650PLUS : BBT40 ◉M ax. Tool Dia. (W.T)

Vertical Machining Center

Position control of the Twin Arm ATC using Servo Motors has been improved drastically. Also the tool changing speed has been improved, leading to the reduction of non-cutting time.

F400 | F500/650PLUS

F400/500/650

Servo ATC

HYUNDAI WIA MACHINE TOOL

Peripheral Device

F400 : F500PLUS Standard

20% Improvement Chip to Chip Time : 6% Improvement Tool to Tool Time :

Magazine The tool magazine holds twenty four (24) tools as standard and thirty (30) tools as an option. <F500/650PLUS : 30 Tools Standard> Due to the wider selection of tools and the random tool selection method, tool change time has been improved.

Ø90/Ø150 (Ø3.5″/Ø5.9″) F500/650PLUS :

Ø80/Ø125 (Ø3.1″/Ø4.9″) ◉ Max. Tool Weight : 8 kg (17.6 lb) ◉T ool Selection Method :

Random

F500/50 | F650/50 ◉ No. of Tools : 24 [30] EA ◉ Tool Shank : BT50 [BBT50] ◉M ax. Tool Dia. (W.T)

Ø110/Ø200 (Ø4.3″/Ø7.8″) ◉ Max. Tool Weight : 15 kg (33 lb) ◉T ool Selection Method :

Random

14 + 15

F400/500/650

Machining Capability High Performance, High Accuracy Cutting Vertical Machining Center

Tool diameter Cutting depth Cutting width Cutting speed Spindle rpm Feed rate Chip quantity

F500PLUS

Ø80 (Ø3.15″) x 6F 3 mm (0.118″) 70 mm (2.755″) 286 mm/min (11.26 ipm) 1,137 r/min 0.9 mm/rev (0.035″/rev) 210 cc/min

DRILL 〈Material〈JIS〉:S45C(Carbon steel)〉

Tool diameter Cutting depth Cutting speed Spindle rpm Feed rate Chip quantity

Ø32 (Ø1.25″) 40 mm (1.57″) 24 mm/min (0.94 ipm) 268 r/min 0.2 mm/rev (0.007″/rev) 43 cc/min

TAP. 〈Material〈JIS〉:S45C(Carbon steel)〉

Tap spec./Pitch Cutting depth Cutting speed Spindle rpm Feed rate

M24 x P3.0 40 mm (1.57″) 8 mm/min (0.31ipm) 106 r/min 3 mm/rev (0.118″/rev)

❖ The above result might be different based on your processing circumstances

Sample Workpieces

FACE MILL 〈Material〈JIS〉:S45C(Carbon steel)〉

Tool diameter Cutting depth Cutting width Cutting speed Spindle rpm Feed rate Chip quantity

Ø80 (Ø3.15″) x 5F 5.5 mm (0.216″) 70 mm (2.755″) 236 mm/min (9.29 ipm) 1,137 r/min 0.99 mm/rev (0.038″/rev) 430 cc/min

DRILL 〈Material〈JIS〉:S45C(Carbon steel)〉

Tool diameter Cutting depth Cutting speed Spindle rpm Feed rate Chip quantity

Ø43 (Ø1.69″) 43 mm (1.69″) 27 mm/min (Ø1.06 ipm) 199 r/min 0.38 mm/rev (0.014″/rev) 109 cc/min

TAP. 〈Material〈JIS〉:S45C(Carbon steel)〉

Tap spec./Pitch Cutting depth Cutting speed Spindle rpm Feed rate

M42 x P4.5 42 mm (1.65″) 7 mm/min (0.27 ipm) 53 r/min 4.5 mm/rev (0.177″/rev)

Vertical Machining Center

FACE MILL 〈Material〈JIS〉:S45C(Carbon steel)〉

F400/500/650

F400

HYUNDAI WIA MACHINE TOOL

Machining

16 + 17

Smart System Software for smart operating and machining

F400/500/650

Faster processing and enhanced accuracy in are possible through the HYUNDAI WIA Smart System. The user friendly software and equipment monitoring of the Smart System maximizes productivity.

Pr od

for Vertical Machining Center

Convenien ce

HW-eDNC HW-MCG

in g

g Hi

-T HW

n recisio

User Friendly

-WARMUP | HW

Intelligent M ach ini

HYUNDAI WIA Smart System

e Monitorin achin g

Hig

HW-TM | HW-MC S|

DC -T HW

HW -A

HW-MMS

tivi ty

|H WWC M

S rgy Ene

-E HW

HW-MMS

HW-eDNC

HYUNDAI WIA Machine Monitoring System

HYUNDAI WIA ethernet Direct Numerical Control

This software is for remote control monitoring of equipment status (mobile, PC.) It checks and manages the state of multiple machines and the progress of processing on a real time basis.

This software allows transmition of NC data between PC and a machine's CNC. The processing programs can be managed on the PC through the ethernet or serial communication.

HYUNDAI WIA Smart System

HW-TDC

HYUNDAI WIA Machine Guidance

HYUNDAI WIA Thermal Displacement Compensation

Software that offers operation, maintenance, management monitoring and various user friendly features.

Software that measures the changes in the external environment as well as heat emission during processing to help reduce thermal displacement.

Vertical Machining Center

HW-MCG

HYUNDAI WIA MACHINE TOOL

(FANUC)

HW-WARMUP

HW-ESS

HYUNDAI WIA WARMing Up

HYUNDAI WIA Energy Saving System

Warm-up software that measures main spindle halt and offers system warm-up time automatically.

An environmental friendly software that reduces the unnecessarily wasted standby power waiting for an operation.

(FANUC)

HW-TOM

HW-WCM

HYUNDAI WIA Tool Offset Measurement

HYUNDAI WIA Work Coordinate Measurement

User friendly GUI software that indicates tool length, diameter, and damage (H/W excluded)

User-friendly GUI software that measures work coordinates (H/W excluded )

(FANUC)

HW-TM

HW-MCS

HYUNDAI WIA Tool Monitoring

HYUNDAI WIA Machining Condition Selection

A tool monitoring software which analyzes the load of the spindle motor to determine and monitor possible damage of tools.

Software that automatically sets cutting and feeding parameters according to the machining types (speed, degree, quality)

(FANUC)

HW-AFC HYUNDAI WIA Adaptive Feed Control Software that controls the feed automatically to maintain a certain working load to extend tool life as well as productivity.

F400/500/650

(FANUC)

USB Port

Convenience is increased when inputting and outputting program. The USB port is available in addition to the former input output methods such as CF memort card and LAN. (HW F Series, S 828D : Standard / F32i-A : Non applicable)

18 + 19

SIEMENS Controller Software for smart operating and machining

F400/500/650

DIFFERENTIATED CAPABILITIES, INTEGRATED ENGINEERING PERFECTLY INTERLINKED SIEMENS 828D is a latest model CNC. It is designed for horizontal/vertical all-purpose equipment. Its 80-bit control reduces processing time and increases productivity. The 828D is easy to maintain and run, with its easy setup functions.

SIEMENS

SIEMENS 828D comes with Advanced Surface, metal processing software that monitors speed and accuracy.

Machining Time Time : 48 min

Machining Time Time : 33 min

HYUNDAI WIA MACHINE TOOL

SIEMENS Advanced Surface

Vertical Machining Center

Speed

Unblanced Velocity

Blanced Velocity

Speed

SIEMENS Technology Shop Mill • Dialogue-type programming, simple and convenient • Effective specifications for small quantity batch production • Step-by-step operation possible without knowledge of the DIN/ISO code

SIEMENS Communication Variable Communication Port RJ 45 Ethernet USB 2.0 Compact Flash Card

3D Simulation • 3D confirmation of the completed processing configuration of the NC program is possible.

Easy input/output of a program is possible as a USB memory card, a CF memory card and LAN can all be used.

•Offers standards for 2D simulation. • Possible to confirm the simulation of the NC grogram during processing.

ISO Code Programming

Easy Extend • Easy to install/uninstall an option (Ex : barfeeder and chip conveyor, etc.) • Possible to install in one motion without revision of individual perimeters. • A spate list is unnecessary as option items are indicated with letters.

If the ISO Dialect (G291) is ordered, JIS-based G-code programs can be used. (Standard)

F400/500/650

SINUMERIK + SINAMICS 80bit NANO FP Accuracy

20 + 21

User Convenience Various Devices for User Convenience

F400/500/650

Measuring Device

Precision Device

Touch Sensor

NC Rotary Table

U-Center

Workpiece coordinate values can be set automatically using the optional spindle probe.

The NCRT makes it possible to machin up to 5-axis. Various types of products can be machined.

The U-Center makes external and internal diameter turning possible, allowing for a wide range of variety in products.

TLM - Laser & Touch Tool lengths and diameters can be set automatically using the optional tool setter. This can also be used to monitor tool attrition and detect broken tools. Laser Type

Hydraulic Device Hydraulic Supply Unit Instead of the standard hydraulic supply unit, an optional fixture unit can bring the pressure up to 100 bar,(1,450 bar,) maximizing the clamping force on the fixture.

Touch Type

Chip Disposal Process (F500PLUS)

HYUNDAI WIA MACHINE TOOL

Optional

Vertical Machining Center

Chip Conveyor Rear (Left)

Std. Coolant (Nozzle)

Standard

Bed Flushing Coolant

Standard

Through Spindle Coolant (20/30/70 bar [290/435/1,015 psi)

Option

Jet Coolant

Option

Gun Coolant

Option

Side Oil Hole Coolant

Option

Chip Conveyor Front (Left)

Chip Conveyor Timely and effective disposal of chips will enhance productivity as well as the working environment.

•Hinge Belt Type : Highly efficient when disposing a lot of chips. Capable of handling stringy chips. (Long Chip) •Scraper Type : Convenient for shortly cut chips.. (Short Chip) •Drum Filter Type : Advantageous in precision, as the chips do not flow in to the coolant nozzle. (AL Chip)

Gantry Loader System Implementation of high speed gantry loaders is possible as well as the construction of flexible automation cells by a work stocker. Optimization of the installation space is also possible.

Work Stocker

F400/500/650

Coolant Unit (F500/650PLUS Std.)

22 + 23

Specifications Standard & Optional Spindle 8,000rpm (Direct) 8,000rpm (Belt) 8,000rpm (Belt) 8,000rpm (Direct) 12,000rpm (Direct) 12,000rpm (Direct) Spindle Cooling System

FANUC FANUC SIEMENS SIEMENS FANUC SIEMENS Std.rpm 12K

● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable F400 ● ○ ○ ○ ○ ○ ○ ●

ATC ATC Extension Tool Shank Type U-Center Stud Bolt Collet Change Table & Column APC Tap Type Pallet T-Slot Pallet NC Rotary Table High Column Coolant System Std. Coolant (Nozzle) Bed Flushing Coolant

Through spindle coolant*

24 30 BT40 BBT40 CAT40/BCV40 D'andrea 45° 60° 90°

● ○ ● ○ ○ ○ ● -

200mm (7.8″)

● ☆ ○

20bar (290 psi) 30bar (435 psi), 20ℓ(5.3 gal) 70bar (1,015 psi), 15ℓ(4 gal) 70bar (1,015 psi), 30ℓ(7.9 gal)

Top Cover Jet Coolant Gun Coolant Side Oil Hole Coolant Air Gun Cutting Air Blow Tool Measuring Air Blow (Only for TLM) Air Blow for Automation Thru MQL Device (Without MQL) Coolant Chiller Power Coolant System (For Automation) Chip Disposal 300ℓ(79.2 gal) Coolant Tank Cabin Screw Chip Conveyor Chip Conveyor Hinge Left(Rear) (Tank Position/Chip Disposal) Scraper Left(Left) Special Chip Conveyor (Drum Filter) Standard (180ℓ[47.5 gal]) Swing (200ℓ[52.8 gal]) Chip Wagon Large Swing (290ℓ[76.6 gal]) Large Size (330ℓ[87.2 gal]) Customized Safety Device Total Splash Guard S/W Machine Guidance (HW-MCG) : FANUC Tool Monitoring (HW-TM) : FANUC DNC Software (HW-eDNC) Spindle Heat Distortion Compensation (HW-TDC) Spindle Warm up Function (HW-WARMUP) Energy Saving System (HW-ESS) : FANUC Machine Monitoring System (HW-MMS) Tool Offset Measurement (HW-TOM) : FANUC

● ● ○ ○ ○ ○ ● ○ ○ ☆ ○ ○ ○ ☆ ☆ ☆ ☆ ● ○ ○ ☆ ○

S/W Work Coordinate Measurement (HW-WCM) : FANUC Machining Condition Selection (HW-MCS) : FANUC Adaptive Feed Control (HW-AFC) : FANUC ETC Tool Box Customized Color Need Munsel No. CAD & CAM Software Electric Device Call Light 1 Color : ■ Call Light 3 Color : ■■■ Call Light & Buzzer 3 Color : ■■■B Work Light Electric Cabinet Light Door Inter-Lock Remote MPG 3 Axis MPG Spindle Load Meter Spindle RPM Meter Work Counter Total Counter Tool Counter Multi Tool Counter

Electric Circuit Breaker AVR (Auto Voltage Regulator) Transformer 25kVA Flash Memory Card Auto Power Off Back up Module for Black out Measuring Device Air Zero

Std. High Speed Auto Shutter (Only for Automatic System) Sub O/P Auto Door

○ Control of Additional Axis

☆ ☆

TACO SMC

Work Measuring Device TLM Touch (Marposs/Renishaw/Bloom) Laser Tool Broken Detective Device Linear Scale X/Y/Z Axis Coolant Level Sensor (Only for Chip Conveyor) Environment Air Conditioner Dehumidifier Oil Mist Collector Oil Skimmer (Only for Chip Conveyor) MQL (Minimal Quantity Lubrication) Fixture & Automation

NC Rotary TableI/F

○

FANUC SIEMENS FANUC (Mounted Type) SIEMENS (Built-in Type) FANUC (Mounted Type) SIEMENS (Built-in Type) Digital Digital Digital 6ea 9ea

Single Channel 1Axis 2Axis

External M Code 4ea Automation Interface I/O Extension (In & Out)

16Contact 32Contact

F400 ○ ○ ○ ● ☆ ☆ ● ○ ○ ● ○ ● ● ○ ○ ● ○ ● ○ ○ ○ ○ ○ ○ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ○ ☆ ○ ○ ○ ○ ☆ ○ ☆ ☆ ○ ☆ ○ ☆ ○ ☆ ○ ○

Hyd. Device ● ☆ ○ ○ ○ ○ ☆ ☆ ○

Through Spindle Coolant* : Please check the filter types with sales representative. Specifications are subject to change without notice for improvement.

Std. Hyd. Unit

Hyd. Unit for Fixture

65bar (942.7 psi) / 20ℓ(5.3 gal) 45bar (652.7 psi) 70bar (1,015 psi) 100bar (1,450 psi) Customized

● ○ ○ ○ ☆

Specifications Standard & Optional

ATC ATC Extension

Tool Shank Type

U-Center Stud Bolt Collet Change Table & Column APC Tap Type Pallet T-Slot Pallet NC Rotary Table High Column Coolant System Std. Coolant (Nozzle) Bed Flushing Coolant

Through spindle coolant*

24 30 BT40 BBT40 BT50 BBT50 CAT40/BCV40 CAT50/BCV50 D'andrea 45° 60° 90°

300mm (11.8″)

20bar (290 psi) 30bar (435 psi), 20ℓ(5.3 gal) 70bar (1,015 psi), 15ℓ(4 gal) 70bar (1,015 psi), 30ℓ(7.9 gal)

Top Cover Jet Coolant Gun Coolant Side Oil Hole Coolant Air Gun Cutting Air Blow Tool Measuring Air Blow (Only for TLM) Air Blow for Automation Thru MQL Device (Without MQL) Coolant Chiller Power Coolant System (For Automation) Chip Disposal 350ℓ(92.5 gal) Coolant Tank Chip Conveyor Hinge Left(Rear) (Tank Position/Chip Disposal) Scraper Left(Left) Special Chip Conveyor (Drum Filter) Standard (180ℓ[47.5 gal]) Swing (200ℓ[52.8 gal]) Chip Wagon Large Swing (290ℓ[76.6 gal]) Large Size (330ℓ[87.2 gal]) Customized Safety Device Total Splash Guard S/W Machine Guidance (HW-MCG) : FANUC Tool Monitoring (HW-TM) : FANUC DNC Software (HW-eDNC) Spindle Heat Distortion Compensation (HW-TDC) Spindle Warm up Function (HW-WARMUP) Energy Saving System (HW-ESS) : FANUC Machine Monitoring System (HW-MMS) Tool Offset Measurement (HW-TOM) : FANUC

Work Coordinate Measurement (HW-WCM) : FANUC Machining Condition Selection (HW-MCS) : FANUC Adaptive Feed Control (HW-AFC) : FANUC ETC Tool Box Customized Color Need Munsel No. CAD & CAM Software Electric Device Call Light 1 Color : ■ Call Light 3 Color : ■■■ Call Light & Buzzer 3 Color : ■■■B Work Light Electric Cabinet Light Door Inter-Lock Remote MPG 3 Axis MPG

Spindle Load Meter

Spindle Speed Meter Work Counter Total Counter Tool Counter Multi Tool Counter

○

Electric Circuit Breaker AVR (Auto Voltage Regulator)

○

Transformer

○

● ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ● ○ ○ ☆

● ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆

○

● ○ ○ ☆

FANUC SIEMENS FANUC (Mounted Type) SIEMENS (Built-in Type) FANUC (Mounted Type) SIEMENS (Built-in Type) Digital Digital Digital 6ea 9ea

25kVA 30kVA

Flash Memory Card Auto Power Off Back up Module for Black out Measuring Device Air Zero

TACO SMC

○

☆ ● ☆ ○ ○ ○ ○ ☆ ☆ ○

☆

NC Rotary TableI/F

Through Spindle Coolant* : Please check the filter types with sales representative. Specifications are subject to change without notice for improvement.

● ☆ ○ ○ ○ ○ ☆ ☆ ○

Control of Additional Axis

Single Channel 1Axis 2Axis

External M Code 4ea Automation Interface I/O Extension (In & Out)

16Contact 32Contact

Hyd. Device

Std. Hyd. Unit

40bar (580 psi) / 15ℓ(4 gal) 70bar (1,015 psi) 100bar (1,450 psi) Customized

F500PLUS ○ ○ ○

F500/50 ○ ○ ○

● ☆ ☆

● ○ ○ ● ○ ● ● ○ -

○

○ ○ ○ ○ ○ ○ ☆ ○ - ○ ○ ○ ○ ○ ○ ○ ○ ☆ ○ ☆ ○ ○ ○ ○ ☆ ○ ☆ ☆ ☆ ○ ☆ ○ ☆ ○ ☆ ○ ○

○ ○ ○ ○ ○ ○ ☆ ○ ○ ○ ○

●

○ ○ ☆

○ ○ ○ ○ ○ ☆ ○ ☆ ○ ○ ○ ○ ☆ ○ ☆ ☆ ☆ ○ ☆ ○ ☆ ○ ☆ ○ ○

HYUNDAI WIA MACHINE TOOL

Spindle Cooling System

FANUC FANUC SIEMENS FANUC FANUC Std.rpm 10K, 12K

S/W

Vertical Machining Center

8,000rpm (Belt) 6,000rpm (Belt) 6,000rpm (Belt) 10,000rpm (Belt) 12,000rpm (Direct)

● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable F500 Plus F500/50 ● - ● - ○ ○ ○ ○ ● ● - ● ● ○ ● - ● - ○ ○ - ○ ☆ ☆ ● ● ☆ ☆ ☆ ☆ - - ● ● ☆ ☆ ○ ○ ● ● ● ● ○ ○

F400/500/650

Spindle

24 + 25

Specifications Standard & Optional Spindle 8,000rpm (Belt) 6,000rpm (Belt) 6,000rpm (Belt) 10,000rpm (Belt) Spindle Cooling System

FANUC FANUC SIEMENS FANUC Std.rpm 10K

ATC ATC Extension

Tool Shank Type

U-Center Stud Bolt Collet Change Table & Column APC Tap Type Pallet T-Slot Pallet NC Rotary Table High Column럼 Coolant System Std. Coolant (Nozzle) Bed Flushing Coolant

Through spindle coolant*

24 30 BT40 BBT40 BT50 BBT50 CAT40/BCV40 CAT50/BCV50 D'andrea 45° 60° 90°

300mm (11.8″)

20bar (290 psi) 30bar (435 psi), 20ℓ(5.3 gal) 70bar (1,015 psi), 15ℓ(4 gal) 70bar (1,015 psi), 30ℓ(7.9 gal)

Top Cover Jet Coolant Gun Coolant Side Oil Hole Coolant Air Gun Cutting Air Blow Tool Measuring Air Blow (Only for TLM) Air Blow for Automation Thru MQL Device (Without MQL) Coolant Chiller Power Coolant System (For Automation) Chip Disposal 350ℓ(92.5 gal) Coolant Tank Chip Conveyor Hinge Left(Rear) (Tank Position/ Scraper Left(Left) Magnetic Left(Rear) Chip Disposal) Special Chip Conveyor (Drum Filter) Standard (180ℓ[47.5 gal]) Swing (200ℓ[52.8 gal]) Chip wagon Large Size (330ℓ[87.2 gal]) Customized Safety Device Total Splash Guard S/W MMachine Guidance (HW-MCG) : FANUC Tool Monitoring (HW-TM) : FANUC DNC Software (HW-eDNC) Spindle Heat Distortion Compensation (HW-TDC) Spindle Warm up Function (HW-WARMUP) Energy Saving System (HW-ESS) : FANUC Machine Monitoring System (HW-MMS) Tool Offset Measurement (HW-TOM) : FANUC Work Coordinate Measurement (HW-WCM) : FANUC Machining Condition Selection (HW-MCS) : FANUC Adaptive Feed Control (HW-AFC) : FANUC

● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable F650 Plus F650/50 ● - ● - ○ ○ ○ ● ● ○ ● ● ○ ● - ● - ○ ○ - ○ ☆ ☆ ● ● ☆ ☆ ☆ ☆ - - ● ● ☆ ☆ ○ ○ ● ● ● ● ○ ○

○

ETC Tool Box Customized Color CAD & CAM Software Electric Device Call Light Call Light Call Light & Buzzer Work Light Electric Cabinet Light Door Inter-Lock Remote MPG 3 Axis MPG Spindle Load Meter Spindle Speed Meter Work Counter Total Counter Tool Counter Multi Tool Counter

○

○ ● ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆

○

☆ ● ☆ ○ ○ ○ ○ ☆ ☆ ○ ○ ○ ○

☆

● ○ ○ ○ ☆

Transformer

Through Spindle Coolant* : Please check the filter types with sales representative. Specifications are subject to change without notice for improvement.

☆ ○ ○ ○ ○ ☆ ☆ ○ ○ ○ ○

FANUC SIEMENS FANUC SIEMENS FANUC SIEMENS Digital Digital Digital 6ea 9ea

25kVA 30kVA

Flash Memory Card Auto Power Off Back up Module for Black out Measuring Device TACO SMC

Single Channel 1Axis 2Axis

External M Code 4ea Automation Interface I/O Extension (In & Out)

●

1 Color : ■ 3 Color : ■■■ 3 Color : ■■■B

Electric Circuit Breaker AVR (Auto Voltage Regulator)

Air Zero

● ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ● ○ ○ ○ ☆

Need Munsel NO.

16Contact 32Contact

Hyd. Device

Std. Hyd. Unit

40bar (580 psi) / 15ℓ(4 gal) 70bar (1,015 psi) 100bar (1,450 psi) Customized

F650PLUS F650/50 ● ● ☆ ☆ ☆ ☆

● ○ ○ ● ○ ● ● ○ - ○ - ○ - ○ ○ ○ ○ ○ ○ ☆ - ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ○ ☆ ○ ○ ○ ○ ☆ ○ ☆ ☆ ☆ ○ ☆ ○ ☆ ○ ☆ ○ ○

● ○ ○ ● ○ ● ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ○ ○ ○ ○

●

○ ○ ☆

○ ○ ○ ○ ○ ☆ ○ ☆ ○ ○ ○ ○ ☆ ○ ☆ ☆ ☆ ○ ☆ ○ ☆ ○ ☆ ○ ○

Specifications External Dimensions

unit : mm(in)

2450 (96.5)

LEFT SIDE CHIP CONVEYOR

340 (13.4)

1200 (47.2)

618 (24.3) 1200 (47.2)

2498 (98.3) 1200 (47.2) 2287 (90)

LEFT SIDE REAR CHIP CONVEYOR CHIP CONVEYOR

1134 (44.6) 1263 (49.7)

613 (24.1)

Vertical Machining Center

26 + 27

2994 (117.9)

1860 (73.2) 2800 (110.2)

918(36.1)

4063 (160)

REAR

302 205 (11.9) 8.1)

6 (113.2)

523 (20.6)

2670 (105.1)

340 (13.4)

90 (3.5)

2540 (100)

1900 (74.8)

205 (8.1) 1900 (74.8) 2833 (111.5) 1795 (70.7)

280 (11)

37860 (2.4) (14.9) 1197 (47.1)

918(36.1)

19501560 (76.8) (61.4)

1860 (73.2)

F400/500/650

1950 (76.8)

1200 (47.2)

1950 (76.8)

2833 (111.5)

548 (21.6)

60 (2.4)

LEFT SIDE CHIP CONVEYOR

618 (24.3)

HYUNDAI WIA MACHINE TOOL

F400

LEFT SIDE

280 (11)

2833 (111

1950 (76.8)

1200 (47.2)

618 (24.3)

1950 (76.8)

Specifications

)

2450 (96.5)

External Dimensions

918(36.1)

280 (11)

90 (3.5)

2540 (100)

unit : mm(in)

613 (24.1)

378 60 (14.9) (2.4) 1197 (47.1)

1263 (49.7)1134 (44.6)

4063 (160)

1200 (47.2)

340 (13.4)

1200 (47.2)

618 (24.3)

1560 (61.4) 1950 (76.8) 1900 (74.8)

2287 (90)

2833 (111.5)

LEFT SIDE CHIP CONVEYOR

2800 1860 (110.2) (73.2)

918(36.1)

2994 (117.9)

280 (11)

120 (4.7)

905 (35.6)

1689 (66.5)

2840 (111.8)

LEFT SIDE CHIP CONVEYOR

1200 (47.2)

632 302 (24.9) 205 (11.9) (8.1) 2110 (83.1) 440 386 350 (17.3)(74.8) (15.2) (13.8) 1900

1200 (47.2)

2573 (101.3)

F500 : 2800 (110.2) F500/50 : 2876 (113.2)

REAR CHIP CONVEYOR

1314 (51.7)

906 (35.6)

4814 (189.5) 708 (27.9)

281 (11.1)

Please check the dimension with sales representative when applying 12K spindle.

1 (102.8) 0 (108.7)

428 (16.9)

1145 (45.1)

2055 (80.9)

523 (20.6)

(105.1)

340 (13.4)

LEFT SIDE CHIP CONVEYOR REAR CHIP CONVEYOR 1200 (47.2) 2498 (98.3)

1900 (74.8)

205 (8.1)

F500PLUS

1795 (70.7)

2670 (105.1)

340 (13.4)

613 (24.1)

1263 (49.7)

458 (18)

905 (35.6)

708 (27.9)

415 (16.3) 302 (11.9)

REAR CHIP CONVEYOR 632 (24.9)

4814 (189.5) 1689 (66.5)

281 (11.1) 1795 (70.7)

2670 (105.1)

1950 (76.8) 340 (13.4)

428 (16.9)

120 (4.7)

LEFT SIDE CHIP CONVEYOR

613 (24.1)

1314 (51.7)

Vertical Machining Center

HYUNDAI WIA MACHINE TOOL

40632994 (160)(117.9)

F400/500/650

1860 (73.2) 2800 (110.2)

1200 (47.2)

1134 (44.6)

2110 (83.1) 1900 (74.8) 205 2840 (111.8)(8.1)

386 (15.2)

1560 (61.4) 1900 (74.8) 1950 (76.8)

Specifications

1200 (47.2)

340 (13.4)

1200 (47.2)

2498 (98.3)

2833 (111.5)

2287 (90)

1200 (47.2)

1900 (74.8)

618 (24.3)

1145 (45.1)

1314 (51.7) 440 (17.3)

1263 (49.7)

350 (13.8)

1200 (47.2)

523 (20.6)

(24.1)

F500 : 2800 (110.2) F500/50 : 2876 (113.2)

2573 (101.3)

613 External Dimensions

2055 (80.9)

120 (4.7)

24Tool : 2611 (102.8) 30Tool : 2760 (108.7)

428 (16.9)

1200 (47.2)

2670 (105.1) 340 (13.4)

2804 (110.4)

5 (70.7)

1145 (45.1)

2055 (80.9)

CHIP CONVEYOR CHIP CONVEYOR

unit : mm(in)

F650PLUS 918(36.1) 28 (1

906 (35.6)

28(49.7) 1263 + 29

Specifications Table Dimensions

unit : mm(in)

224 (8.8)

Ø55 (Ø2 0 1.7)

0 Ø46 ) 8.1 (Ø1

42.5 (1.7)

Ø9 (Ø3 0 .5)

F400 800 (31.5)

100 (3.9)

Center 1-18 Other 4-18

20 (0.8)

1,000 (39.4)

42.5 (1.7)

125 (4.9)

460 (18.1)

125 (4.9)

52.8 (2.1)

Basic Hole

205 (8.1)

700 (27.6)

12 (0.5)

205 (8.1)

32 (1.3)

905 (35.6)

30(1.2)

F650/650PLUS

100 (3.9)

700 (27.6)

700 (27.6) 1,600 (63)

100 (3.9)

20 (0.8) 32 (1.2) 12 (0.5)

300 (11.8)

650 (25.6)

300 (11.8)

58 Ø4 8) (Ø1

5 125 100 100 100 100 125 5 (0.2) (4.9) (3.9) (3.9) (3.9) (3.9) (4.9) (0.2)

Ø5 53 (Ø2 1.8 )

330 (13)

432 (17)

102 102 (4) (4)

Detail T-Slot

30 (1.2) T-SLOT DETAIL

Specifications Table Dimensions

205 (8.1)

18) 8 (Ø Ø45

F650/650PLUS

1,060 (41.7)

70 (2.8)

1,200 (47.2)

F400/500/650

500 (19.7)

Center 1-18 Other 4-18

20 (0.8)

264.8 (10.4)

32 (1.3) 12 (0.5)

0 Ø60 .6) 3 2 (Ø

30(1.2)

TAIL

F500/50 50 (2)

1,100 (43.3) 1,200 (47.2)

50 (2)

5 (0.2)

50 100 100 100 100 50 (2) (3.9) (3.9) (3.9) (3.9) (2)

141.3 (5.6)

Detail T-Slot

500 (19.7)

Ø7 1 (Ø2 0 8)

5 (0.2)

Ø (Ø 110 4. 3)

5 (0.2)

102 (4)

50 100 100 100 100 50 (2) (3.9) (3.9) (3.9) (3.9) (2)

5 (0.2)

Ø553 (Ø21.8 )

Vertical Machining Center

Ø (Ø 95 3.7 )

HYUNDAI WIA MACHINE TOOL

unit : mm(in)

30 + 31

Specifications Tool Shank

unit : mm(in)

F400 | F500PLUS | F650PLUS

BT40/BBT40, BIG PLUS 1 (0.04) (BBT40)

22.6 (0.88)

16.6 (0.65) 27 (1.06)

65.4 (2.57)

Ø15 (Ø0.59)

29 (1.14)

35 (1.38)

Ø5 (Ø0.19)

6 (0.24)

Ø3 (Ø0.11)

2 (0.08) (BT40)

Ø10 (Ø0.39)

Ø63 (Ø2.48″)

Ø44.45 (Ø1.75″)

45°

7/24 60°

16.1 (0.63)

M16

3 (0.11)

11.5(0.45)

Ø4 (Ø0.15)

10 (0.39)

Through Coolant

F500/50 | F650/50

BT50/BBT50, BIG PLUS 1.5 (0.059) (BBT50)

15 (0.59)

35.4 (1.39) 25.7 (1.01)

M24

101.8 (4)

45 (1.77)

60°

1BP8

7 (0.276) 16 (0.63)

Ø6 (Ø0.23)

1BP8 Ø8 (0.315)

38 (1.49)

35 (1.37) Ø6.2 (0.244)

23.2 (0.91)

3 (0.11) (BT50)

10 (0.39)

Ø23 (Ø0.91)

7/24 60°

Ø17 (Ø0.66)

Ø69.85 (Ø2.75)

Ø100 (Ø3.93)

45°

Through coolant

Specifications Tool Shank

unit : mm(in)

HYUNDAI WIA MACHINE TOOL

F400 | F500PLUS | F650PLUS

CAT40/BCV40

32.15 (1.266)

3 (0.11)

11.5(0.45)

Vertical Machining Center

68.25 (2.687)

Ø4 (Ø0.15)

3.2 (0.125) (CAT40)

F400/500/650

15 (0.59)

45°

Ø5 (Ø0.19)

60°

25 (0.984) 16.383 (0.645) 16.1 (0.63)

5/8″-11

Ø44.5 (1.75)

Ø63.5 (2.5) 15.8 (0.625)

25 (0.984)

7/24

1 (0.04) (BCV40)

Ø3 (Ø0.11)

19.05 (0.75)

Through Coolant

32 + 33

F500/50 | F650/50

1.5 (0.059) (BCV50, BIG PLUS)

37.5 (1.478)

35.1 (1.383)

45°

7/24 3.2(0.125) (CAT50) 19.05 (0.750)

1BP8

45 (1.772)

60°

1BP8

7 (0.276) 16 (0.63)

Ø8 (0.315)

101.8 (4.000)

Ø6.2 (0.244)

60°

Ø6 (Ø0.23)

23 (0.906)

Ø69.8 (Ø2.750)

Ø98.4 (3.875)

1″-8UNC

25.8 (1.015)

CAT-50/BCV50

Through coolant

Specifications Specifications

[

Table Size Maximum Load Capacity

Table

Table Change Time

r/min

Spindle Power Output (Max./Cont.)

N.m(lbf.ft)

15/11(20/15) [15/11(20/15)] [11/7.5(15/10)] [13.5/9(18.1/12)] [15.8/10.5(21/14)] [15.8/10.5(21/14)] 95/70(70.0/51.6) [95/70(70.0/51.6)] [70/45(51.6/33.2)] [95/63(70.0/46.5)] [95/63(70.0/46.5)] [95/63(70.0/46.5)] Direct [Belt] [Direct] [Belt] [Direct] [Direct]

mm(in)

800/460/520 (31.5″/18.1″/20.5″)

Distance from Table Surface to SP

mm(in)

130~650 (5.1″~25.6″)

Distance from Column to SP. center

mm(in)

m/min(ipm) -

Number of Tools

Tool Shank

475 (18.7″) 32/32/32 (1,260/1,260/1,260) LM Guide 24 [30] BT40 [BBT40]

Max. Tool Dia. (W.T / W.O)

mm(in)

Ø90/Ø150 (Ø3.5″/Ø5.9″)

Max. Tool Length

mm(in)

300 (11.8″)

Max. Tool Weight

kg(lb)

8 (17.6)

Tool Selection Method Tool Change Time

T-T

sec

C-C

sec

Random 1.3 3.6

Coolant Tank

ℓ(gal)

Lubricating Tank

ℓ(gal)

2 (0.5)

Hydraulic Tank

ℓ(gal)

20 (5.3)

ℓ/min(gal)

250 (66)

Air Consumption (0.5MPa) Electric Power Supply Thickness of Power Cable Voltage

NT #40 8,000 [8,000] [12,000] [8,000] [8,000] [12,000]

Travel (X/Y/Z)

Slide Type

Machine

kW(HP)

Rapid Traverse Rate (X/Y/Z)

power SupPly

600 (1,323)

Table Driving Method

Spindle Driving Method

Tank Capacity

kg(lb)

Change Method

Spindle Torque (Max./Cont.)

ATC

1,000×460 (39.4″×18.1″)

Spindle RPM

Feed

mm(in)

sec

Spindle Taper

Spindle

] : Option

F400

ITEM

KVA Sq V/Hz

300 (79.3)

20 Over 25 220/60 (200/50)

Floor Space (L×W)

mm(in)

2,450×2,100 (96.5″×82.7″)

Height

mm(in)

2,833 (111.5″)

Weight

kg(lb)

Controller

Specifications are subject to change without notice for improvement.

5,100 (11,244) HW F i Series [F 32i-A] [S 828D]

Specifications Specifications

[

F500PLUS

Table Change Time

BIG PLUS #40 NT #50 8,000 [10,000] [12,000]

15/11 (20/15)

[18.5/11 (24.8/14.7)]

[27.8/18.5 (37.3/24.8)]

286/143 (210.9/105.4) [117.6/95.3 (86.7/70.3)]

358/179 (264.0/132.0)

[117.7/70 (86.8/51.6)]

[294/196 (216.8/97.4)]

Belt [Belt] [Direct]

mm(in)

1,060/510/635 (41.7″/20.1″/25″)

Distance from Table Surface to SP

mm(in)

150~785 (5.9″~30.9″)

Distance from Column to SP. center

mm(in)

615 (24.2″)

Roller Guide

Number of Tools

Tool Shank

30 24

BBT40

Max. Tool Dia. (W.T / W.O)

mm(in)

Ø80/Ø125 (Ø3.1″/Ø4.9″)

Max. Tool Length

mm(in)

300 (11.8″)

Max. Tool Weight

kg(lb)

8 (17.6)

Tool Selection Method Tool Change Time

Belt [Belt] 1,100/510/635 (43.3″/20.1″/25″)

36/36/30 (1,417/1,417/1,260)

m/min(ipm)

Slide Type

6,000 [6,000]

15/11 (20/15) [18.5/15 (24.8/20)]

Travel (X/Y/Z)

Rapid Traverse Rate (X/Y/Z)

BT50 [BBT50] Ø110/Ø200 (Ø4.3″/Ø7.9″) 350 (13.8″) 15 (33.1)

Random

T-T

sec

1.3

3.8

C-C

sec

3.7

5.9

Coolant Tank

ℓ(gal)

350 (92.5)

Lubricating Tank

ℓ(gal)

2 (0.5)

Hydraulic Tank Air Consumption (0.5MPa)

15 (4)

ℓ(gal)

110 (29.1)

ℓ/min(gal)

Electric Power Supply Thickness of Power Cable Voltage

N.m(lbf.ft)

Spindle Driving Method

Machine

r/min

kW(HP)

(Max./Cont.)

power SupPly

800 (1,764)

Table Driving Method

Spindle Torque

Tank Capacity

Change Method

Spindle Power Output

ATC

kg(lb)

Spindle RPM

Feed

1,200×500 (47.2″×19.7″)

sec

Spindle Taper

Spindle

HYUNDAI WIA MACHINE TOOL

Maximum Load Capacity

Table

mm(in)

KVA

Over 25

220/60 (200/50)

V/Hz

Floor Space (L×W)

mm(in)

Height

mm(in)

2,815 (110.8″)

3,021 (118.9″)

Weight

kg(lb)

7,500 (16,976)

7,700 (16,976)

HW F i Series

HW F i Series [F 32i-B] [S 828D]

Controller

Specifications are subject to change without notice for improvement.

Vertical Machining Center

Table Size

] : Option

F500/50

F400/500/650

ITEM

2,910×2,690 (114.6″×105.9″)

2,910×2,860 (114.6″×112.6″)

34 + 35

Specifications Specifications

[

F650PLUS

ITEM Table Size Maximum Load Capacity

Table

Table Change Time

mm(in)

1,600×650 (63″×25.6″)

kg(lb)

1,300 (2,866)

sec

Change Method

Table Driving Method

Spindle Taper Spindle RPM

BIG PLUS #40 NT #50

r/min

8,000 [10,000]

Spindle Power Output

Spindle

kW(HP)

(Max./Cont.) Spindle Torque

N.m(lbf.ft)

(Max./Cont.) Spindle Driving Method

Feed

358/179 (264.0/132) [294/196 (216.8/97.4)]

Belt

mm(in)

150 ~ 785 (5.9″~30.9″)

Distance from Column to SP. center

mm(in)

735 (28.9″) 36/36/30 (1,417/1,417/1,260)

m/min(ipm)

Roller Guide

30 24

BBT40

Max. Tool Dia. (W.T / W.O)

mm(in)

Ø80/Ø125 (Ø3.1″/Ø4.9″)

Max. Tool Length

mm(in)

300 (11.8″)

Max. Tool Weight

kg(lb)

8 (17.6)

Tool Change Time

BT50 [BBT50] Ø110/Ø200 (Ø4.3″/Ø7.9″) 350 (13.8″) 15 (33.1)

Random

T-T

sec

1.3

3.8

C-C

sec

3.8

Coolant Tank

ℓ(gal)

350 (92.5)

Lubricating Tank

ℓ(gal)

2 (0.5)

Hydraulic Tank Air Consumption (0.5MPa)

ℓ(gal)

ℓ/min(gal)

125 (33.0)

Electric Power Supply Thickness of Power Cable Voltage

286/143 (210.9/105.4) [117.6/95.3 (86.7/70.3)]

Distance from Table Surface to SP

Tool Selection Method

Machine

1,400/660/635 (55.1″/26″/25″)

Tool Shank

power SupPly

15/11 (20/150) [27.8/18.5 (37.3/24.8)]

Number of Tools

Tank Capacity

15/11 (20/15) [18.5/15 (25/20)]

mm(in)

Slide Type

ATC

6,000 [6,000]

Travel (X/Y/Z)

Rapid Traverse Rate (X/Y/Z)

mm(in)

Weight

kg(lb)

Specifications are subject to change without notice for improvement.

220/60 (200/50)

V/Hz

Height

Controller

Over 25

mm(in)

15 (4) 110 (29.1)

KVA

Floor Space (L×W)

] : Option

F650/50

3,500×2,560 (137.8″×100.8″)

2,810 (110.6″)

2,871 (113″)

9,500 (20,944)

HW F i Series

HW F i Series [F 32i-A] [S 828D]

Controller SIEMENS 828D (F400 | F500/50 | F650/50)

Two Language switchable

50% - 120%

Max 4 axis

High Speed, High Rigidity Function

Soft Limit

Time, Parts Internal

HYUNDAI WIA MACHINE TOOL

0 - 120% F0, 5, 25/50, 100%

Protection Function Emergency Stop Over Travel Contour Monitoring Program Protection Automation Support Fun. Actual Speed Display(Monitor) Tool Life Management Work Count Function Language Function

Chinese Traditional, Czech, Danish, Dutch, Finnish, Hungarian, Japanese, Korean, Polish, Russian, Swedish, Portuguese, Turkish

Data Transfer RS 232C I/F Ethernet USB Memory Stick & CF Card Option DRF offset Load and save of MDI Teach-in Number of levels for skip blocks 8 Simulation in 3D display Shop Mill TRACYL TRANSMIT

Interactive program

Vertical Machining Center

5 axis 6 axis (axis + spindle) 0.0001mm / 0.00001inch

F400/500/650

Control Function Max. configuration of axis Max. configuration of axis and spindle Least Command/input Feed Function Feedrate Override Rapid Traverse Override Acceleration with jerk limitation Programmable acceleration Follow-up mode Measuring system 1 and 2, selectable Separate path feed for corners and chamfers Travel to fixed stop Spindle Functions Spindle Override Spindle Orientation Spindle Speed Limitation Rigid Tapping Interpolations Linear interpolation axis Circle via center point and end point Circle via interpolation point Helical interpolation non-uniform rational B splines Advanced Surface Compressor for 3-axis machining Tool Function Tool Radius Comp. Zero Offset (G54, G55, G56, G57 ,G58, G59) Programmable Zero Offset 3D Tool Radius Compensation Tool management Display CRT / MDI Screen saver Manual Operation Manual Handle/Jog Feed Reposition Reference Approach Spindle Control Auto Operation Single Block Feed Hold Optional Block Skip Machine Lock Dry Run Simulation Diagnosis Function Alarm display Monitor PLC status/LAD display Programming Function Part Program Storage Length Program Name Subroutine Call Absolute/incremental Command Scaling, ROT Inch / Metric Conversion Interactive CYCLE program Block Search Macro Read / Write System Variable BackGround Editing Miscellaneous Functions Lable Skip Program Stop / End Lookahead , Jerk Limitation Feed & Forward Control SIEMENS Program exe. Maximum number of tools/cuttings Number of levels for skip blocks 1

Standard 100 EA

TFT 10.4Ë? Color

Ref 1, 2 Approach Start, Stop, Rev, Jog, Ort.

5MB 23 digits Protection Level G90 - G91

M - Code M00, M01, M02, M30 150 Block 256/512

Figures in inch are converted from metric values. Design and specifications are subject to change without notice.

36 + 37

Controller HYUNDAI WIA FANUC i Series Axis control / Display unit Controlled axis Simultaneous controllable axis Least input increment Least command increment Inch/Metric conversion Interlock Machine lock Emergency stop Stored stroke check 1 Stored stroke check 2 Stored stroke check 3 Follow-up Servo off Backlash compensation Position switch Stored pitch error compensation LCD/MDI Operation Automatic operation (memory) MDI operation DNC operation Search function Program restart Wrong operation prevention Buffer register Program check function Single block Handle interrupt Feed functions Manual jog feed Manual handle feed-rate Feed command Feedrate override Jog feed Rapid traverse override Override cancel Rapid traverse bell-shaped acceleration/deceleration Auto corner override Program input & Interpolation functions Label Skip Control in/out Nano Interpolation Exact stop mode/Exact stop Dwell Helical interpolation Threading/synchronous feed Manual reference point return Reference point return Reference point return check 2nd, 3rd, 4th Reference point return Program stop/end Tape code Optional block skip Max. programmable dimensions Program number Absolute/incremental command Decimal point input Plane selection Work coordinate system setting Work coordinate preset Additional work coordinate system Manual absolute Programmable data input Sub program call Custom macro Addition to custom macro common variables Cylinderical interpolation Canned cycle

3 axis (X, Y, Z) 3 axis (G00 & G01 : 3 axis, G02 & G03 : 2 axis) X, Y, Z axis : 0.001 mm (0.0001″) X, Y, Z axis : 0.001 mm (0.0001″) G20 / G21 Each axis / All axis All axis Over Trable

+/- 0~9999 pulse (rapid traverse & cutting feed)

8.4″ color LCD

Need DNC Program Sequence, Program

Dry run, program check

Rapid, Jog, handle x1, x10, x100 F code feedrate direct command 0~200% (10% Unit) 0~5,000 mm/min (197 ipm) F0, F25%, F50%, F100%

G62

Positioning/Linear/Circular (G00/G01/G02/G03) G61 / G09 G04, 0~9999.9999sec G33 G28 G27 G30 M00, M01 / M02, M30 EIA RS-244/ISO 840 (Automatic recognition) 1 EA +/- 9999.9999 (+/- 8 digits) O4 /N8 G90 / G91 G17, G18, G19 G52~G59 G50.3 G54.1 P1 ~P48 (48 pairs) "On" fixed G10 10 Step #100 ~ #199 , #500 ~ #999 G02, G03 G73, G74, G76, G80 ~ G89

Figures in inch are converted from metric values. Design and specifications are subject to change without notice.

Program input & Interpolation functions Optional chamfering/corner R Skip function High speed Skip function Automatic coordinate system setting Coordinate system rotation Programmable mirror image Single direction positioning External data input Cylindrical interpolation AI advanced preview control Polar coordinate command Sub / Spindle functions Miscellaneous function Miscellaneous function lock Spindle speed command Spindle speed override Spindle orientation Rigid tapping Tool functions / Tool compensation Tool function Cutter compensation C Tool length measurement Tool length compensation Tool offset amount Tool offset pairs Tool life management Data input / Output & Editing functions Reader/Puncher interface Memory card input/output USB input/output Embeded Ethernet Part program storage length Registered programs Memory lock Back ground editing Extended part program editing Setting, display, diagnosis Self-diagnosis function History display Help function Run hour/Parts count display Actual cutting feedrate display Spindle/Servo setting screen Multi-language display Dynamic switching display language LCD Screen Save Option Sub Axis Control Two way pitch error compensation Manual Guide 0i Manual Guide i Dynamic graphic display Optional block skip add AI contour control(AICC) AI contour control(AICC) Ⅱ Nano Smoothing Tool Management Function Protection of data at 8 levels Data server FASTethernet Part program storage length Expand

G31

G68, G69 G50.1, G51.1 G60 Tool offset/message/machine zero point shift G5.1 (20) G15, G16 M3 digits S5 digits, binary output 50%~120% (10% unit)

Max. T8 digits G40~G42 Z Axis INPUT C G43, G44, G49 G45~G48 (+/- 6 digits) 400 pairs

RS232C

100Mbps 1280m (512 Kbyte) 400 ea

Copy, move, change of NC program

Alarm & operator message

Selection of 5 optional language Screen saver

4, 5 Axis 8.4″ color LCD 10.4″ color LCD (Interactive Program) 9 ea (Application can be limited) 40 Block 200 Block

1GB 100 Mbps (Option board is required) 5120m (2 Mbyte)

Controller FANUC 32i-A (F400 | F650/50)

Position switch Pitch error compensation LCD/MDI Operation Automatic operation (memory) MDI operation Research Function Program restart Dry run Single Block Buffer register Memory Card DNC operation Feed functions Manual jog feed Manual handle feed-rate Feed command Feedrate override Jog feed Rapid traverse override Override cancel Rapid traverse bell-shaped acce/deceleration Program input & Interpolation functions Label Skip Interpolation function Exact stop mode/Exact stop Control in/out Dwell Helical interpolation Threading/synchronous feed Manual reference point return Reference point return Reference point return check 2nd, Reference point return Program stop/end Tape code Optional block skip Max. programmable dimensions Program number /Sequence number Absolute/incremental command Decimal point input Plane selection Work coordinate preset Manual absolute Programmable data input Sub program call Custom macro AI Contour Control(AICC) I Cylinderical interpolation Canned cycle Optional chamfering/corner R Skip function Automatic coordinate system setting Coordinate system rotation Programmable mirror image

+/- 0~9999 pulse (rapid traverse & cutting feed)

10.4″ color LCD

Sequence, Program

Rapid, Jog, handle x1, x10, x100 F code feedrate direct command 0~200% (10% Unit) 0~5,000mm/min (197ipm) F0, F25%, F50%, F100%

Positioning/Linear/Circular (G00/G01/G02/G03) G61 / G09

G04, 0~9999.9999sec

G28 G27 G30 M00, M01 / M02, M30 EIA / ISO (Automatic recognition) 1 ea +/- 9999.9999” (+/- 8digit) O4 / N8 digit G90 / G91 G17, G18, G19 G52~G59 “On” fixed G10 10 Step

G73, G74, G76, G80 ~ G89 G31

Figures in inch are converted from metric values. Design and specifications are subject to change without notice.

Option Sub Axis Control Additional work coordinate system Additional custom micro change Work coordinate Command Work coordinate Interpolation Cylinderical interpolation Single direction positioning FAST ethernet Data server AI Contour Control II(AICC II) Additional optional blockskip Handle interupt Manual Handle Feed program storage length Dynamic graphic display Protection of data at 8 levels Tool monitoring function

M3 digit S5 digits, binary output 50% ~ 120% (10% Unit)

Max. T8 digits G40~G42 G43, G44, G49 64 Pair

HYUNDAI WIA MACHINE TOOL

Sub / Spindle functions Miscellaneous function Miscellaneous function lock Spindle speed command Spindle speed override Spindle orientation Rigid tapping Tool functions / Tool compensation Tool function Cutter compensation C Tool length compensation Tool offset pairs Tool life management Data input / Output & Editing functions Reader/Puncher interface Memory card input/output Embeded Ethernet Part program storage length Registered programs Memory lock Back ground editing Extended part program editing Extenal message Setting, Display, Diagnosis Self-diagnosis function Alarm history display Help function Run hour/Parts count display Actual cutting feedrate display Graphic display Spindle/Servo setting screen Operation monitor screen Selection of 5 optional language LCD Screen Save Auto Data Backup Manual Guide i

RS232C

Vertical Machining Center

Backlash compensation

3 axis (X, Y, Z) 3 axis (G00 & G01 : 3 axis, G02 & G03 : 2 axis) X, Y, Z axis : 0.001mm (0.0001″) X, Y, Z axis : 0.001mm (0.0001″) G20 / G21 Each axis / All axis All axis

100 Mbps 320 m (128 Kbyte) 125 ea

Copy, move, change of NC program

Alarm & Message

F400/500/650

Axis control / Display unit Controlled axis Simultaneous controllable axis Least input increment Least command increment Inch / Metric conversion Interlock Machine lock Emergency stop Stored stroke check 1 Mirror Image Follow-up Servo off

Loadmeter Light Screen saver Interactive Programming

48 Pair / 300 Pair #100~#199, #500~#999

G60 100 Mbps 1GB 9 ea (Application can be limited) 3 unit 640m (256Kbyte) ~ 5120m (2Mbyte)

HWTM (Embeded FANUC Type)

38 + 39

Controller FANUC 32i-B (F500/50)

[ ] : Option, ☆ Needed technical consultation

Controlled axis / Display / Accuracy compensation

Auxiliary function / Spindle speed function

Control axes Simultaneously controlled axes

Auxiliary function Level-up M code Spindle speed function Spindle override Multi position spindle orientation FSSB high speed rigid tapping

Least setting Unit Least input increment Inch / Metric conversion High response vector control Interlock Machine lock Backlash compensation Position switch LCD / MDI Feedback Stored stroke check 1 Stored pitch error compensation

3 axes (X, Y, Z) 2 axes [Max. 4 axes] X, Y, Z, axes : 0.001 mm (0.0001″) B axes : 1 deg [0.001] deg X, Y, Z, axes : 0.001 mm (0.0001″) B axes : 1 deg [0.001] deg G20/G21 All axes / Each axis All axes ± 0 ~ 9999 pulses (Rapid traverse / Cutting feed) 10.4″ color LCD Absolute motor feedback Over travel

Operation Automatic operation (Memory) MDI operation DNC operation Program restart Wrong operation prevention

Needed DNC software / CF card

Program check function

Dry run, Program check Z axes Machine lock, Stroek check before move

Single block Search function Interpolation functions Nano interpolation Positioning Linear interpolation Cylinderical interpolation Exact stop mode Dwell Skip Reference position return Thread synchronous cutting Helical interpolation

G00 G01 G02, G03 Single : G09, Continuous : G61 G04 0~9999.9999 sec G31 1st reference : G28 Ref. position check : G27 2nd reference : G30 G33 Circular + Linear interpolation 2 axes(max.)

Feed function / Acc. & Dec. control Manual feed Cutting Feed command Feedrate override Rapid traverse override Override cancel Feed per minute Feed per revolution Look-ahead block

Rapid traverse Jog : 0~2,000 mm/min (79 ipm) Manual handle : x1, x10, x100 pulses Reference position return Direct input F code 0 ~ 200% (10% Unit) F1%, F5%, F25% / 50%, F100% G98 G99 40 Block, 200 Block (Mold)

Program input Tape Code Optional block skip Absolute / Incremental program Program stop / end Maximum command unit Plane selection Workpiece coordinate system Manual absolute Programmable data input Sub program call Custom macro G code system Programmable mirror image G code preventing buffering Including Chamfering / Corner R Canned cycle Coordinate rotation

EIA/ISO 1EA G90/G91 M00, M01/M02, M30 ±999,999.999 mm (±99,999.9999 inch) X-Y : G17, X-Z : G18, Y-Z : G19 G52, G53, 6 pairs (G54 ~ G59) Fixed ON G10 10 folds nested #100~#199, #500~#999 A G51.1, G50.1 G4.1 G73, G74, G76, G80 ~ G89 G68, G69

Figures in inch are converted from metric values. Design and specifications are subject to change without notice.

M & 4 digit Multi / Bypass M code S & 5 digit , Binary output 50% ~ 150% (10% Unit) M19

Tool function / Tool compensation Tool Tool Tool Tool Tool

function life management offset pairs nose radius compensation nose length compensation

Tool offset memory C Tool length measurement

Max. T 8 digit ☆ 256 pairs 64 pairs G40, G41, G42 G43, G44, G49 Tool length, diameter, abrasion (length, diameter) Z axes Input C

Editing function Part program storage size No. of registerable programs Program protect Background editing Extended part program editing Memory card program edit

640m (256KB) 500 EA

Copy, move and change of NC program

Data input / output & Interface I/O interface Screen hard copy External message External key input External workpiece number search Automatic data backup

RS 232C, CF card, USB memory

Setting, display and diagnosis Self-diagnosis function History display Run hour / Parts count display Maintenance information Actual cutting feedrate display Display of spindle speed / T code Graphic display Operating monitor screen Power consumption monitoring Spindle / Servo setting screen Multi language display Display language switching LCD Screen Saver Processing select

Alarm & Operator message & Operation

Spindle / Servo load etc... Spindle & Servo Support 20 languages Selection of 5 optional Languages Screen saver Speed/ridigity setting

Option Additional optional block skip Fast ethernet Data server Protection of data at 8 levels Sub Spindle control Polar coordinate command Polar coordinate interpolation Cylinderical interpolation One-way positioning Stored stroke check 2, 3 Inverse-time feed Scaling Manual guide i Handle interrupt Manual handle feed Additional custom macro variables Rigid tap Return Tool management function Tool offset number Program storage capacity Program registration number Additional work coordinate AICC Ⅱ

☆ 9 EA Needed option board Needed option board

G15, G16 G12.1, G13.1 G07.1 G60 G93 G50, G51 Interactive auto program 2/3 units #100~#199, #500~#999 #100~#199, #500~#999, #98000~#98499

☆ Max. 400 pair ☆ 512KB~2MB ☆ Max. 1000 ea 48 pair (G54.1 P1 ~ P48) 200 block, ☆ 400 block

Global Network Headquarter HYUNDAI WIA MACHINE TOOL

Changwon Technical Center / R&D Center / Factory 153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Korea (Zip Code : 51533) TEL : +82 55 280 9114 FAX : +82 55 282 9680

Uiwang Technical Center / R&D Center

Hyundai WIA Machine Tools America

Jiangsu HYUNDAI WIA

Chengdu Office

No.6 Fenghuang Road, Fenghuang Town, Zhangjjagang City, Jiangsu province, China

NO.508 Room, B Block, AFC Plaza, NO.88 Jiaozi Road, High-tech Zone, Chengdu, China 610041

TEL : +86 512 5672 6808 FAX : +86 512 5671 6960

TEL : +86 28 8665 5550 FAX : +86 28 8666 2985

Hyundai WIA Machine Tools Europe

Hyundai WIA Machine Tools China Shanghai Office

Wuhan Office

Kaiserleipromenade 5, D-63067 Offenbach, Germany

1-3F, Bldg6, No.1535 Hongmei Road, Xuhui District, Shanghai, China, 200233

Room 302, B tower, Donghe Center, Dongfeng three road, Zhuankou, Wuhan, Hubei, China 430056

TEL : +49 69271 472 701 FAX : +49 69271 472 719

TEL : +86 21 6427 9885 FAX : +86 21 3431 0376

TEL : +86 27 5956 3256~7 FAX : +86 27 5952 3258

Raunheim Service Center Raunheim R&D Center

Beijing Office

Qingdao Office

13 Floor Building B Zhonghangji square, No.15 Ronghua South Road, Yizhuang Economic and Technological Development Zone District, Beijing, China 100176

Room 1207, Caifu Building, 182-6 Haier Middle Road, Qingdao, China 266061

265, Spring Lake Drive, Itasca, IL, 60143 TEL : +1 201 489 2887 FAX : +1 201 489 2723

Kelsterbacher Strasse 51, 65479 Raunheim, Germany TEL : +49 6142 9256 0 FAX : +49 6142 834 100

TEL : +86 532 8667 9333~5 FAX : +86 532 8667 9338

TEL : +86 10 8453 9850~2 FAX : +86 10 8453 9853

Inida Office

Guangzhou Office

Shenyang Office

#4/169, Rajiv Gandhi Salai, (OMR), Kandanchavadi, Chennai-600 096, Tamilnadu, India TEL: +91-44-3290-1719

Room 311, Unit 1-3, Poly Tal Tu Wun, Hanxi Avenue, Panyu District, Guangzhou, China 511400

Room 1304, NO.53 Beizhan Road, Shenhe District, Shenyang, China 110013

TEL : +86 20 8550 6595~6 FAX : +86 20 8550 6597

TEL : +86 24 3228 6640 FAX : +86 24 3228 6642

F400/500/650

OVERSEAS OFFICES

Vertical Machining Center

37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do, Korea (Zip Code : 16082) TEL : +82 31 596 8209 Fax : +82 55 210 9804

40 + 41

F650 PLUS Movie

Knuckle NCRT

Carrier NCRT

Carrier Automation

2015-12 003.003 ENG Head Office & Factory

Overseas Sales Team

153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do

16F, 37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do

Tel +82 55 280 9206, 9299

Tel +82 31 593 8173

Fax +82 55 210 9804

machine.hyundai-wia.com