SE2000 Series HYUNDAI WIA CNC Turning Center
Technical Leader The CNC Turning Center SE2000 Series , designed by Hyundai WIA with years of expertise and the latest technology, is designed to maximize productivity by enhancing both technical performance and economic efficiency.
MODEL SE2000A
Chuck Size 6″
SE2000 MA
● ● ●
SE2000MC SE2000PA SE2000PC
8″
●
SE2000C
Turret
Guideway
● ●
LM
Box
Standard
●
●
●
●
Turn Mill
●
●
●
● ●
●
●
●
High Speed, Rigidity and Productivity Economical CNC Turning Center for next generation
SE2000 Series ● 45° slanted one-piece bed structure with high rigidity
● Stabilized unit structure to minimize thermal displacement ● High productivity achieved with its mechanism ● Unbeatable rapid traverse rate : 36m/min {1,417ipm} (SE2000A/MA/C/MC) ● The most reliable high speed servo turret : 0.1sec/step ● Application of boxguideways for heavy duty cutting (SE2000PA/PC) ● Compact design suitable for installation in restricted space. ● Ergonomic design for convenient access to chuck and tool
01
SE2000 Series
Basic Features The Best Productivity 6 inch / 8 inch Compact CNC Turning Center
01
High Precision, High Rigidity One-piece Structure The SE2000 Series is designed with a 45 degree slanted bed combined with square type and tube type rib structure. This special design enhances rigidity and vibration absorbing capability, allowing powerful cutting with high precision.
02
Guideway SE2000A/C is designed with LM Guideways for all axes for better speed and response. LM Guideway reduces non-cutting time and achieves a rapid traverse rate of 36m/min, which increases productivity.
Main Spindle
03
Heat produced by the main spindle is blocked by applying a symmetric one-piece base and an insulation plate. This enables maintenance of high accuracy even during a long period of machining.
SE2000PA/PC is designed with box guideways for all axes for stable heavy duty cutting.
Box Guide (SE2000PA/PC)
Turret
LM Guide (SE2000A/MA/C/MC)
Ball Screw In order to eliminate thermal growth and increase accuracy, all axis are driven by high precision double anchored ballscrews.
The turret is driven by a servo motor at a remarkably high speed indexing time of 0.12sec/step. Cycle time is reduced and productivity is improved.
04
HYUNDAI WIA MACHINE TOOL
Basic Features
04
02
SE2000 Series
03
CNC Turning Center
SE2000PC >>
01
Experience the new Technology
04 + 05
Reduction of non-cutting time by traverse rate ◉ Rapid Traverse Rate (X/Z axis) SE2000A | SE2000C | SE2000MA | SE2000MC :
36/36
1,417/1,417
m/min (
ipm)
SE2000PA | SE2000PC : 24/24 m/min (945/945 ipm)
◉ Travel (X/Z axis) SE2000A | SE2000C : 210/330 mm (8.3″/13″) SE2000MA | SE2000MC : 210/286 mm (8.3″/11.3″) SE2000PA | SE2000PC : 210/310 mm (8.3″/12.2″)
02
SE2000 Series
High Precision Spindle Long Lasting High-accuracy & Excellent Performance CNC Turning Center
Main Spindle The main spindle is designed with the same structure often found in larger sized machines. The combination of taper roller bearings and angular contact ball bearings leads to excellent heavy duty cutting performance.
0.001°
Also, machining performance is enhanced by applying ribstar belt to minimize noise and belt slipping problems. The spindle is designed with a Labyrinth structure to minimize possible bearing damage from coolant and to improve machining stability.
C-Axis Control C-axis with BZ-Sensor performs 0.001°(Command) split angle and position control in order to process various products. (SE2000MA/MC)
HYUNDAI WIA MACHINE TOOL
Spindle
HYUNDAI-iTROL
9kW [12HP] (Cont.) 9kW [12HP] (Cont.)
75.675.6 [55.8] [55.8] 68.768.7 [50.7] [50.7]
68.7N∙m [50.7lbf∙ft] (Cont.) 9 9 68.7N∙m [50.7lbf∙ft] (Cont.) [12][12]
500500
1,500 1,500
4,500 4,500
Spindle Speed (r/min) Spindle Speed (r/min)
Torque(N∙m[lbf∙ft]) Torque(N∙m[lbf∙ft])
132.3N∙m [97.6lbf∙ft] 60%) 132.3N∙m [97.6lbf∙ft] (S6(S6 60%) 10.8kW [14.5HP] 60%) 10.8kW [14.5HP] (S6(S6 60%)
10.810.8 [14.5] 110.3N∙m [81.4lbf∙ft] (Cont.) [14.5] 110.3N∙m [81.4lbf∙ft] (Cont.)
9kW [12HP] (Cont.) 9kW [12HP] (Cont.)
9 9 [12][12]
286286
857857
2,571 2,571
Spindle Speed (r/min) Spindle Speed (r/min)
1,500 2,000 1,500 2,000
52.552.5 [38.7] [38.7]
3,000 3,000
6,000 6,000
SE2000C/MC/PC SE2000C/MC/PC
Power(kW[HP]) Power(kW[HP])
Torque(N∙m[lbf∙ft]) Torque(N∙m[lbf∙ft])
15kW [20.1HP] (30min) 15kW [20.1HP] (30min)
15 15 [20.1] 167N∙m 167N∙m [123.2lbf∙ft] (30min) [20.1] [123.2lbf∙ft] (30min)
110.3 110.3 [81.4] [81.4]
11 11 [14.8] [14.8]
Torque(N∙m[lbf∙ft]) Torque(N∙m[lbf∙ft])
11kW [14.8HP] (Cont.) 11kW [14.8HP] (Cont.)
92N∙m [67.9lbf∙ft](Cont.) 92N∙m [67.9lbf∙ft](Cont.)
2,570 2,570
1,143 1,143
15kW [20.1HP] (Cont.) 15kW [20.1HP] (Cont.)
15 15 It is possible to process with stability [20.1] 167N∙m [123.2lbf∙ft](Cont.) [20.1]
by adopting 167N∙m [123.2lbf∙ft](Cont.) 80mm(3.1″) movable tailstock as an option
206206 [151.9] [151.9] 167167 [123.2] [123.2]
167167 [123.2] [123.2] 92 92 [67.9] [67.9]
Spindle Speed (r/min) Spindle Speed (r/min)
4,500 4,500
Mill Turret Mill Turret
Power(kW[HP]) Power(kW[HP])
Torque(N∙m[lbf∙ft]) Torque(N∙m[lbf∙ft])
22.5NN∙m [16.6lbf∙ft](Max.) 22.5NN∙m [16.6lbf∙ft](Max.)
Tail Stock
95.595.5 [70.4] [70.4]
Spindle Speed (r/min) Spindle Speed (r/min)
18.5kW [24.8HP] (30min)
Quill Dia. : Ø65 (Ø2.5″)
95.5N∙m [70.4lbf∙ft] (15min) 95.5N∙m [70.4lbf∙ft] (15min) 11kW [14.8HP] (60min, Cont.) 11kW [14.8HP] (60min, Cont.) 70N∙m [51.6lbf∙ft](60min) 70N∙m [51.6lbf∙ft](60min) 52.5N∙m [38.7lbf∙ft](Cont.) 52.5N∙m [38.7lbf∙ft](Cont.)
4,500 4,500
18.5kW [24.8HP] (30min) 18.518.5 [24.8] 206N∙m 206N∙m [151.9lbf∙ft] (30min) [24.8] [151.9lbf∙ft] (30min)
Taper : MT4
15kW [20.1HP] (15min) 15kW [20.1HP] (15min)
132.3 132.3 [97.6] [97.6]
SE2000C SE2000C
Power(kW[HP]) Power(kW[HP])
11 11 [14.8] [14.8]
6,000 6,000
SE2000C/PC SE2000C/PC
Power(kW[HP]) Power(kW[HP])
15 15 [20.1] [20.1]
Torque(N∙m[lbf∙ft]) Torque(N∙m[lbf∙ft])
3 3 [4] [4]
22.522.5 [16.6] [16.6]
3kW [4HP] (Cont.) 3kW [4HP] (Cont.) 10N∙m [7.4lbf∙ft](Cont.) 10N∙m [7.4lbf∙ft](Cont.)
10 10 [7.4][7.4]
Quill Travel :
80 mm (3.1″) 2,000 2,000
Spindle Speed (r/min) Spindle Speed (r/min)
4,500 4,500
4,000 4,500 4,500 4,000
Spindle Speed (r/min) Spindle Speed (r/min)
SE2000 Series
10.8kW [14.5HP] 60%) 10.8kW [14.5HP] (S6(S6 60%)
10.810.8 75.6N∙m [55.8lbf∙ft] 60%) [14.5] 75.6N∙m [55.8lbf∙ft] (S6(S6 60%) [14.5]
SE2000A/MA/PA SE2000A/MA/PA
Power(kW[HP]) Power(kW[HP])
CNC Turning Center
Torque(N∙m[lbf∙ft]) Torque(N∙m[lbf∙ft])
06 + 07
Experience the new Technology
SE2000A/PA SE2000A/PA
Power(kW[HP]) Power(kW[HP])
FANUC
03
SE2000 Series
Servo Turret High-speed, High-accuracy, Highly Reliable Servo Turret
Turret
The SE2000 Series has a high performance AC servo motor and 3-piece coupling attached to the turret which enhances its process reliability. Powerful hydraulic tool clamping minimizes tool tip deviation which happens due to the load during heavy duty cutting.
SE2000A | PA ◉ Number of Tools : 12 EA ◉ Tool Size (O.D/I.D) □25/Ø32 (□1″/Ø1.3″) ◉ Indexing Time :
0.12 sec/step
SE2000C | PC ◉ Number of Tools : 12 EA ◉ Tool Size (O.D/I.D)
□25/Ø40 (□1″/Ø1.6″) ◉ Indexing Time : 0.12 sec/step
SE2000MA | MC (Mill Turret) ◉ Output (Cont.) : 3 kW (4 HP) ◉ Speed : 4,500 rpm ◉ Collet size : ◉ Type :
Ø16 (Ø0.6″) (ER25)
VDI30
HYUNDAI WIA MACHINE TOOL
Turret
Mill Turret (VDI)
SE2000A/PA
SE2000A/MA/PA
Power(kW[HP]) Torque(N∙m[lbf∙ft]) Power(kW[HP]) Torque(N∙m[lbf∙ft]) By adopting 3-piece coupling, it ensures powerful clamping and turret indexing and tool rotation is done by a single motor. VDI method makes tool change easier and especially reduces tool change time so that it offers a great convenience.
500
1,500
4,500
75.6 [55.8] 68.7 [50.7]
11 [14.8]
9 [12]
52.5 [38.7]
3,000
6,000
Spindle Speed (r/min)
SE2000C/MC/PC
Torque(N∙m[lbf∙ft])
Power(kW[HP])
132.3N∙m [97.6lbf∙ft] (S6 60%) 10.8kW [14.5HP] (S6 60%)
132.3 [97.6]
110.3N∙m [81.4lbf∙ft] (Cont.) 9kW [12HP] (Cont.)
15 [20.1]
110.3 [81.4]
11 [14.8]
Torque(N∙m[lbf∙ft])
15kW [20.1HP] (30min) 167N∙m [123.2lbf∙ft] (30min) 11kW [14.8HP] (Cont.)
167 [123.2]
92N∙m [67.9lbf∙ft](Cont.)
857 Mill Tool286Holder
2,571
Power(kW[HP])
Also, Drill, Tap, Endmill and many more tools can be utilized to [24.8HP] (30min) enhance productivity and18.5kW efficiency.
167 [123.2]
2,000
Spindle Speed (r/min)
Torque(N∙m[lbf∙ft])
22.5NN∙m [16.6lbf∙ft](Max.)
18.5 [24.8]
167N∙m [123.2lbf∙ft](Cont.)
4,500
Mill Turret
Torque(N∙m[lbf∙ft])
206N∙m [151.9lbf∙ft] (30min) 206 15kW [20.1HP] (Cont.)Milling Head Straight Milling Head Angular [151.9] 15
2,570
Spindle Speed (r/min)
Straight Milling Head and Angular Milling Head live tools can be utilized to cut sides and innerSE2000C diameters of workpieces. Power(kW[HP])
92 [67.9]
1,143
4,500
Spindle Speed (r/min)
[20.1]
95.5 [70.4]
70N∙m [51.6lbf∙ft](60min)
1,500 2,000
6,000
SE2000C/PC
10.8 [14.5]
95.5N∙m [70.4lbf∙ft] (15min) 11kW [14.8HP] (60min, Cont.) 52.5N∙m [38.7lbf∙ft](Cont.)
Spindle Speed (r/min)
Power(kW[HP])
15kW [20.1HP] (15min)
3 [4]
3kW [4HP] (Cont.) 10N∙m [7.4lbf∙ft](Cont.)
10 [7.4]
4,000
4,500
Spindle Speed (r/min)
22.5 [16.6]
4,500
SE2000 Series
75.6N∙m [55.8lbf∙ft] (S6 60%) 9kW [12HP] (Cont.) 68.7N∙m [50.7lbf∙ft] (Cont.)
15 [20.1]
CNC Turning Center
9 [12]
10.8kW [14.5HP] (S6 60%)
08 + 09
Experience the new Technology
10.8 [14.5]
04
SE2000 Series
Machining Capability Excellent Performance, High-accuracy Cutting CNC Turning Center
HYUNDAI WIA MACHINE TOOL
Machining
Machining Variation
SE2000A
Cutting (O.D)
〈Material〈JIS〉:S45C(Carbon steel〉
Ø70 (Ø2.75″) Ø37 (Ø1.45″) 104 m/min (4,094 ipm) 895 r/min 0.4 mm/rev (Ø0.15″/rev) 385 cc/min
SE2000MA Cutting (O.D) 〈Material〈JIS〉:S45C(Carbon steel〉
Processing diameter Side cutting depth Cutting speed Spindle rpm Forwarding speed Chip discharge
Ø42 (Ø1.65″) 4 mm (0.157″) 198 m/min (7,795 ipm) 1,500 r/min 0.45 mm/rev (0.17 ″/rev) 356 cc/min
〈Material〈JIS〉:S45C(Carbon steel〉
15 mm (0.59″) Ø12 (Ø0.47″) 162 m/min (6,378 ipm) 995 r/min 0.4 mm/rev (Ø0.15″/rev) 180 cc/min
〈Material〈JIS〉:S45C(Carbon steel〉
15 mm (0.59″) Ø12 (Ø0.47″) 36 m/min (1.417 ipm) 960 r/min 0.5 mm/rev (Ø0.02″/rev) 17 cc/min
Face Cutting
End Milling
〈Material〈JIS〉:S45C(Carbon steel〉
Work diameter Drill diameter Cutting speed Spindle rpm Forwarding speed Chip discharge
Ø50 (Ø1.97″) Ø22 (Ø0.87″) 28 m/min (866 ipm) 400 r/min 0.4 mm/rev (Ø0.15″/rev) 61 cc/min
I.D Cutting
I.D Threading
O.D Hole Drilling
Ball-End Milling
Tapping 〈Material〈JIS〉:S45C(Carbon steel〉
Processing depth Tap spec / pitch Cutting speed Spindle rpm Forwarding speed
20 mm (0.79″) M12/1.75 8 m/min (315 ipm) 121 r/min 1.75 mm/rev (0.07″/rev)
Tapping
Drilling Processing depth Drill diameter Cutting speed Spindle rpm Forwarding speed Chip discharge
Drilling
Drilling
X-Axis Drilling Processing depth Drill diameter Cutting speed Spindle rpm Forwarding speed Chip discharge
O.D Cutting
SE2000 Series
Work diameter Drill diameter Cutting speed Spindle rpm Forwarding speed Chip discharge
〈Material〈JIS〉:S45C(Carbon steel〉
Processing depth Tap spec / pitch Cutting speed Spindle rpm Forwarding speed
20 mm (0.79″) M12/1.75 8 m/min (315 ipm) 212 r/min 1.75 mm/rev (0.07″/rev)
❖ The above results might be different by types of processing circumstance.
CNC Turning Center
Ø42 (Ø1.65″) 4 mm (0.157″) 198 m/min (7,795 ipm) 1,500 r/min 0.45 mm/rev (0.17 ″/rev) 356 cc/min
Sample Workpiece
10 + 11
Experience the new Technology
〈Material〈JIS〉:S45C(Carbon steel〉
Processing diameter Side cutting depth Cutting speed Spindle rpm Forwarding speed Chip discharge
Drilling
05
iRiS
HYUNDAI WIA Smart Factory Solution
integrated Revolution of industrial Solution
SE2000 Series
iRiS is HYUNDAI WIA’s Smart Factory Solution. iRiS, HYUNDAI WIA’s revolutionary smart factory solution, consists of Smart Monitoring System for integrated management of HYUNDAI WIA machines around the world, and the Smart Machining System with ease, quality control, productivity and safety of the operator in mind.
Smart Monitoring HW-MMS Remote
(Remote service based) A WI AI er ND Cent U HY Call
Hyundai Wia Call Center’s remote diagnosis service provides a HMI/video diagnostic function.
HW-MMS Cloud
(Cloud server based) IA IW DA ver N U er HY ud S Clo
K
R WO
T
R ME
O
ST
NE
A cloud server-based equipment monitoring system for collecting and analyzing facility operation data.
r
me sto Cu ver r Se
CU
HW-MMS Edge
(Customer Server Based)
In
te
rn
et
A customer server-based equipment monitoring system for collecting and analyzing facility operation data.
ng ori nit ent 1 o g M A
ing
or nit Mo nt 2 e Ag
HW-MMS Collector
(Machine data collector) A dedicated program for collecting CNC data for MES/ERP.
Cu
sto
r me
y1
tor
c Fa
y2
tor
m
sto
Cu
c Fa er
A brand new manufacturing machine by Hyundai Wia, HW-MMS is a unique software capable of monitoring the operation status of manufacturing machines in factories, a smart solution to improve manufacturing conditions of customers.
HYUNDAI WIA MACHINE TOOL
iRiS
HYUNDAI WIA Machine Guidance
HYUNDAI WIA Thermal Displacement Compensation
Software that offers operation, maintenance, management monitoring and various user friendly features.
Software that measures the changes in the external environment as well as heat emission during processing to help reduce thermal displacement.
HW-TM
HW-ESS
HYUNDAI WIA Tool Monitoring
HYUNDAI WIA Energy Saving System
A tool monitoring software which analyzes the load of the spindle motor to determine and monitor possible damage of tools.
An environmental friendly software that reduces the unnecessarily wasted standby power waiting for an operation.
HW-DPRO
HW-eDNC
HYUNDAI WIA Dialogue PROgram
HYUNDAI WIA ethernet Direct Numerical Control
Software to create machining program easily and quickly through interactive operation
This software allows transmition of NC data between PC and a machine's CNC. The processing programs can be managed on the PC through the ethernet or serial communication.
USB Port Convenience is increased when inputting and outputting program. The USB port is available in addition to the former input output methods such as CF memort card and LAN.
SE2000 Series
HW-TDC
12 + 13
Experience the new Technology
HW-MCG
CNC Turning Center
Smart Machining
06
HYUNDAI-iTROL The Powerful CNC Platform for Machine Tools
SE2000 Series
COMMUNICATION FUNCTION RJ 45 Ethernet USB 2.0 Compact Flash Card
Easy input/output of programs is possible with the use of USB memory card, CF memory card and LAN.
HYUNDAI Intelligent Control Convenient and Easy-to-Use Machine Tool... Hyundai WIA take operator convenience to a higher level with the new controller, HYUNDAI-iTROL. Experience the new operating environment with HYUNDAI-iTROL.
Energy Saving System You can use energy saving function (ECO) and machining optimization function (SMART) with the MCP button.
Combination of HYUNDAI-iTROL with Siemens servo drive and motor offers the optimum machine tool solution! Dynamic servo control, highly efficient Siemens servo drive and Siemens servo motor with durability and quick response have been applied.
HYUNDAI WIA MACHINE TOOL
HYUNDAI-iTROL
Turret Guidance •Turret reference point setup guide screen
Shop Turn
• The turret reference point can be set quickly and easily with the simple touch of a button. • Easy setting of milling tool direction enabled by a simple touch of
turning center. •Rapid detection of tool's length and wear/tear. •Can be used in conjunction with the Q-setter.
Coordinate Setting •Workpiece coordinate setting is available for the turning center.
• Dialogue-type programming, simple and convenient • Effective specifications for small quantitybatch production • Step-by-step operation possible without knowledge of the DIN/ISO code
3D Simulation
•Intuitive UI for enhanced convenience. • Easy resetting with one touch of the button after shifting position.
Tailstock Management •Intuitive UI for easy tailstock setting in the automatic/manual mode. •History Management function for predefined settings
• 3D confirmation of the completed processing configuration of the NC program is possible. •Offers standards for 2D simulation.
Monitoring of Operating Ratio • Intuitive display uses distinctive colors to indicate the 4 stages of
• Possible to confirm the simulation of the NC grogram during processing.
ISO Code Programming
alarm, cycle, setup, and inactivity. •Displays current activated status as “Activated”. • Options to export 10-day operation history as an NC file or to CF card (MS Excel compatible format)
Soft MCP •Displays the unused optional utility as “Option” for inactivation. • The number of SoftMCP has been increased to 28 to respond to a variety of options. •Usability has been enhanced by connecting/setting with F1 & F2. • Addition of a new ‘FUNCTION’ button to the PPU shortcut button enables quick access to the SoftMCP function.
If the ISO Dialect (G291) is ordered, JIS-based G-code programs can be used. (Standard)
SE2000 Series
• Easy-to-use automatic tool measurement function for the
14 + 15
Experience the new Technology
Tool Setting
CNC Turning Center
the button in the event of a milling tool reference point error.
07
User Convenience Various Devices for User Convenience
SE2000 Series
Bar Feeder System Bar Feeder Bar feeder system enables automation which leads to efficiency improvement. Long Type
3 m (118.1″)
Max Bar Capacity
Ø42 mm (1.7″)
Short Type
1.5 m (59.1″)
Max Bar Capacity
Ø65 mm (2.6″)
Parts Conveyor The parts conveyor transfers the finished workpiece unloaded by the parts catcher for user convenience.
Bar Feeder Machining Process
Round Bar Material
Bar Feeder
Machining
Parts Catcher
Parts Conveyor
HYUNDAI WIA MACHINE TOOL
Optional
SE2000 Series
CNC Turning Center
Gantry Loader System
Experience the new Technology
16 + 17
Gantry Loader Machining Process The high speed gantry loaders and the work stocker allow the implementation of automation cells. This enables machining process flexibility and productivity enhancement.
Raw Material
In Work Stocker
1st Machining
Turn Over
End Product
Out Work Stocker
2nd Machining
Specifications Standard & Optional Spindle
● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable SE2000A/PA
SE2000MA
Safety Device
SE2000A/PA
Main Spindle Hollow Chuck 3 Jaw
6″
●
●
Total Splash Guard
8″
○
○
Chuck hydraulic pressure maintenance interlock
Main Spindle Solid Chuck 3 Jaw
6″
○
☆
Electric Device
8″
☆
☆
Call Light
Standard Soft Jaw (1set)
●
●
Call Light
Chuck Clamp Foot Switch
●
●
2 Steps Hyd, Pressure Device
☆
Spindle Inside Stopper
SE2000MA
●
●
○(CE:●)
○(CE:●)
1 Color : ■
●
●
2 Color : ■■
○
○
Call Light
3 Color : ■■■
○
○
☆
Call Light & Buzzer
3 Color : ■■■B
○
○
☆
☆
Electric Cabinet Light
○
○
5° Index
☆
-
Remote MPG
-
-
C-Axis (0.001°)
-
●
Work Counter
Digital
○
○
○(CE:●)
○(CE:●)
Total Counter
Digital
○
○
○
○
Tool Counter
Digital
○
○
Multi Tool Counter
Digital
○
○
Chuck Open/Close Confirmation Device 2 Steps Chuck Foot Switch Turret Tool Holder
●
●
Electric Circuit Breaker
○
○
☆
☆
○
○
○
○
Mill Turret
VDI
-
●
AVR (Auto Voltage Regulator)
Straight Milling Head (Axial)
Collet Type,1ea
-
●
Transformer
Angular Milling Head (Radial) Collet Type,1ea
-
●
Auto Power Off
Straight Milling Head (Axial)
-
-
Measurement
Adapter Type
20kVA
Angular Milling Head (Radial) Adapter Type
-
-
Q-Setter
○
○
Boring Sleeve
●
●
Automatic Q-Setter
○
○
Drill Socket
●
-
○
○
U-Drill Holder
○
○
Work Close Confirmation Device TACO (Only for Special Chuck) SMC
○
○
U-Drill Holder Sleeve
○
○
Work Setter
☆
☆
☆
-
X axis
-
-
-
○
Z axis
-
-
☆
☆
O.D Extension Holder
For Outside Diameter
Angle Head Tail Stock & Steady Rest
Linear Scale
Coolant Level Sensor (Only for Chip Conveyor)
Quill Type Tail Stock
○
○
Environment
Programmable Tail Stock
-
-
Air Conditioner
○
○
Manual Type Hyd. Steady Rest
-
-
Oil Mist Collector
☆
☆
Standard Live Center (Tail Stock : Standard)
○
○
Oil Skimmer (Only for Chip Conveyor)
○
○
High Precesion Live Center
○
○
MQL (Minimal Quantity Lubrication)
☆
☆
2 Steps Tail Stock Pressure System
☆
☆
Fixture & Automation
Quill Forward/Reverse Confirmation Device
○
○
Auto Door
○
○
Tail Stock Foot Switch
☆
☆
Auto Shutter (Only for Automatic System)
☆
☆
Sub Operation Pannel
☆
☆
Coolant & Air Blow Standard Coolant (Nozzle)
●
●
Bar Feeder Interface
○
○
Chuck Coolant (Upper Chuck)
○
○
Bar Feeder (FEDEK)
☆
☆
Gun Coolant
○
○
Work Pusher (Spring Type)
○
○
Through Spindle Coolant (Only for Special Chuck)
☆
☆
Extra M-Code 4ea
○
○
Thru Coolant for Live Tool
-
-
Automation Interface
☆
☆
Chuck Air Blow (Upper Chuck)
○
○
16 Contact
○
○
Tail Stock Air Blow (Upper Tail Stock)
☆
☆
32 Contact
○
○
Turret Air Blow
☆
☆
Parts Catcher
Main SP.
○
○
Air Gun
○
○
Turret Work Pusher (For Automation)
☆
☆
Through Spindle Air Blow (Only for Special Chuck)
☆
☆
Parts Conveyor
☆
☆
0.5Bar (5.3 psi)
●
●
Semi Automation System
☆
☆
6Bar (87 psi)
○
○
Hyd. Device
Power Coolant System (For Automation)
☆
☆
Standard Hyd. Cylinder
Hollow
●
●
Coolant Chiller
☆
☆
Standard Hyd. Unit
35bar (507.6 psi)/ 15ℓ (4 gal)
●
●
High Pressure Coolant
Chip Disposal
I/O Extension (IN & OUT)
Coolant Tank
175ℓ (46.2 gal)
●
●
S/W
Chip Conveyor (Hinge/Scraper)
Rear
○
○
Machine Guidance (HW-MCG)
●
●
Right
○
○
Energy Saving System (HW-ESS)
●
●
☆
☆
Tool Monitoring (HW-TM)
○
○
Standard (180ℓ[47.5 gal])
○
○
Spindle Heat Distortion Compensation(HW-TDC)
○
○
Swing (200ℓ[52.8 gal])
○
○
Large Swing (290ℓ[76.6 gal])
○
○
Large Size (330ℓ[87.2 gal])
○
○
Customized
☆
☆
Special Chip Conveyor (Drum Filter)
Chip Wagon
DNC software (HW-eDNC)
○
○
Machine Monitoring System (HW-MMS)
○
○
Conversational Program (HW-DPRO)
○
○
●
●
☆
☆
☆
☆
ETC Tool Box Customized Color CAD & CAM
Need Munsel No.
❖ 4 channel of TDC(Thermal Displacement Compensation) device is recommended, when more than 6 bar of high pressure coolant is applied, for the high quality machining. Specifications are subject to change without notice for improvement.
Specifications Standard & Optional
SE2000C/PC
Main Spindle Hollow Chuck 3 Jaw
8″
●
●
Total Splash Guard
10″
○
○
Chuck hydraulic pressure maintenance interlock
Main Spindle Solid Chuck 3 Jaw
8″
○
☆
Electric Device
10″
○
○
Call Light
Standard Soft Jaw (1set)
●
●
Call Light
Chuck Clamp Foot Switch
●
●
2 Steps Hyd, Pressure Device
☆
Spindle Inside Stopper
SE2000MC
●
●
○(CE:●)
○(CE:●)
1 Color : ■
●
●
2 Color : ■■
○
○
Call Light
3 Color : ■■■
○
○
☆
Call Light & Buzzer
3 Color : ■■■B
○
○
☆
☆
Electric Cabinet Light
○
○
5° Index
☆
-
Remote MPG
-
-
C-Axis (0.001°)
-
●
Work Counter
Digital
○
○
○(CE:●)
○(CE:●)
Total Counter
Digital
○
○
○
○
Tool Counter
Digital
○
○
Multi Tool Counter
Digital
○
○
Chuck Open/Close Confirmation Device 2 Steps Chuck Foot Switch Turret Tool Holder
●
●
Electric Circuit Breaker
○
○
☆
☆
○
○
○
○
Mill Turret
VDI
-
●
AVR (Auto Voltage Regulator)
Straight Milling Head (Axial)
Collet Type,1ea
-
●
Transformer
Angular Milling Head (Radial) Collet Type,1ea
-
●
Auto Power Off
Straight Milling Head (Axial)
-
-
Measurement
Adapter Type
20kVA
Angular Milling Head (Radial) Adapter Type
-
-
Q-Setter
○
○
Boring Sleeve
●
●
Automatic Q-Setter
○
○
Drill Socket
●
-
○
○
U-Drill Holder
○
○
Work Close Confirmation Device TACO (Only for Special Chuck) SMC
○
○
U-Drill Holder Sleeve
○
○
Work Setter
☆
☆
☆
-
X axis
-
-
-
○
Z axis
-
-
☆
☆
O.D Extension Holder
For Outside Diameter
Angle Head Tail Stock & Steady Rest
Linear Scale
Coolant Level Sensor (Only for Chip Conveyor) ○
○
Environment
○/-
-
Air Conditioner
○
○
Programmable Tail Stock
-
-
Oil Mist Collector
☆
☆
Manual Type Hyd. Steady Rest
-
-
Oil Skimmer (Only for Chip Conveyor)
○
○
Standard Live Center (Tail Stock : Standard)
○
○
MQL (Minimal Quantity Lubrication)
☆
☆
High Precesion Live Center
○
○
Fixture & Automation
2 Steps Tail Stock Pressure System
☆
☆
Auto Door
○
○
Quill Forward/Reverse Confirmation Device
○
○
Auto Shutter (Only for Automatic System)
☆
☆
Tail Stock Foot Switch
☆
☆
Sub Operation Pannel
☆
☆
Bar Feeder Interface
○
○
Quill Type Tail Stock Extension of Tail Stock Quill Stroke 100mm (3.9″)
Coolant & Air Blow Standard Coolant (Nozzle)
●
●
Bar Feeder (FEDEK)
☆
☆
Chuck Coolant (Upper Chuck)
○
○
Work Pusher (Spring Type)
○
○
Gun Coolant
○
○
Extra M-Code 4ea
○
○
Through Spindle Coolant (Only for Special Chuck)
☆
☆
Automation Interface
☆
☆
Thru Coolant for Live Tool
-
-
16 Contact
○
○
Chuck Air Blow (Upper Chuck)
○
○
32 Contact
○
○
Tail Stock Air Blow (Upper Tail Stock)
☆
☆
Parts Catcher
Main SP.
○
○
Turret Air Blow
☆
☆
Turret Work Pusher (For Automation)
☆
☆
Air Gun
○
○
Parts Conveyor
☆
☆
Through Spindle Air Blow (Only for Special Chuck)
☆
☆
Semi Automation System
☆
☆
0.5Bar (5.3 psi)
●
●
Hyd. Device
6Bar (87 psi)
Standard Hyd. Cylinder
Hollow
●
●
Standard Hyd. Unit
35bar (507.6 psi)/ 15ℓ (4 gal)
●
●
High Pressure Coolant
○
○
Power Coolant System (For Automation)
☆
☆
Coolant Chiller
☆
☆
Chip Disposal
I/O Extension (IN & OUT)
S/W
Coolant Tank
175ℓ (46.2 gal)
●
●
Machine Guidance (HW-MCG)
●
●
Chip Conveyor (Hinge/Scraper)
Rear
○
○
Energy Saving System (HW-ESS)
●
●
Right
○
○
Tool Monitoring (HW-TM)
○
○
☆
☆
Spindle Heat Distortion Compensation(HW-TDC)
○
○
Standard (180ℓ[47.5 gal])
○
○
Swing (200ℓ[52.8 gal])
○
○
Large Swing (290ℓ[76.6 gal])
○
○
Large Size (330ℓ[87.2 gal])
○
○
Customized
☆
☆
Special Chip Conveyor (Drum Filter)
Chip Wagon
DNC software (HW-eDNC)
○
○
Machine Monitoring System (HW-MMS)
○
○
Conversational Program (HW-DPRO)
○
○
●
●
☆
☆
☆
☆
ETC Tool Box Customized Color CAD & CAM
Need Munsel No.
❖ 4 channel of TDC(Thermal Displacement Compensation) device is recommended, when more than 6 bar of high pressure coolant is applied, for the high quality machining. Specifications are subject to change without notice for improvement.
SE2000 Series
Safety Device
CNC Turning Center
SE2000MC
HYUNDAI WIA MACHINE TOOL
● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable SE2000C/PC
18 + 19
Experience the new Technology
Spindle
Specifications External Dimensions
unit : mm(in)
500
SE2000A/MA/PA SE2000C/MC/PC
00
R5
2150(84.6)
380(14.9)
1270(50)
1000(39.3)
SPINDLE CENTER
577(22.7)
1443(56.8) 2020(79.5) 2050(80.7)
1260(49.6) 1230(48.4) 3280(129.1)
538(21.2)
665((26.2)
10 (0.4)
675(26.5)
380(14.9)
550(21.6) 910(35.8)
1100(43.3) 1650(65)
2560(100.7)
1820(71.6)
1145(45)
1035(40.7) 335 (13.2)
SPLINDLE CENTER
950(37.4)
1416(55.7)
1224(48.1)
275 (10.8)
192 (7.5)
110 (4.3)
8 (0.3)
1416(55.7)
1224(48.1)
950(37.4)
Ø169(6.6) Ø210(8.2)
275 (10.8)
192 (7.5)
920(36.2) 933(36.7)
Specifications Tooling System
HYUNDAI WIA MACHINE TOOL
unit : mm(in)
SE2000A/PA SE2000C/PC
Boring Bar
Boring Bar Socket
Face & I.D Tool
Drill Facing Holder
U-Drill Socket
U-Drill Cap
20 + 21
12 Stations
Tooling Parts Detail SE2000A/PA
ITEM
Turning Holder
Tap
Boring Holder
O.D Holder
Right/Left
Facing Holder
Tapping Collet I.D Holder
U-Drill Holder
Single
Milling Collet
-
1
1
1
1
O.D Holder
5
-
Ø40 (1 1/2″)
-
-
Opt
Opt
Opt
Opt
Opt
Opt
Ø10 (Ø3/8″)
1
-
Angular Ø12 (Ø1/2″)
1
1
Ø16 (Ø5/8″)
1
Ø20 (Ø3/4″)
1 -
Plug
U-Dril
inch unit
-
Opt
Ø32 (Ø1 1/4″) Drill
mm unit
-
5
Ø25 (Ø1″) Socket
inch unit
-
Opt
Straight Mill Holder
Mill Holder
Boring
mm unit
Ø32 (1 1/4″)
Cap
End Mill
SE2000C/PC
VDI 30 Stations
12
5
Facing Holder
5 - & I.D Face
Tool
1
-
1
1
-
1
-
1
1
1 -
I.D Holder 1 1
1
Boring Bar 1 1
MT 1 × MT 2
1
1
1
1
MT 2
1
1
1
1
Ø20 (Ø3/4″)
Opt
Opt
Ø25 (Ø1″)
Opt
Opt
Opt
Opt
-
-
Opt
Opt
-
-
-
-
Ø32 (Ø1 1/4″) ER Collet
Specifications are subject to change without notice for improvement.
Boring Bar Socket Opt
Drill
Opt
Experience the new Technology
U-Drill
SE2000 Series
ID Holder
CNC Turning Center
Pice Boring Bar Ø32
Ø32
ID Holder
Face & I.D Tool
Drill
Specifications U-Drill
Facing Holder
U-Drill Socket
U-Drill Cap
12 Stations
Tooling System
unit : mm(in)
SE2000MA | SE2000MC
Tap
Tapping Collet
O.D Holder
Straight Mill Holder
Face & I.D Tool
End Mill
Facing Holder
Milling Collet Angular Mill Holder
Plug
VDI 30 12 Stations
I.D Holder
Boring Bar
Boring Bar Socket
Drill
Tooling Parts Detail SE2000MA
ITEM
Turning Holder
O.D Holder Facing Holder I.D Holder
Boring Holder
Driven Holder
Right/Left : Opt.
SE2000MC
mm unit
inch unit
mm unit
inch unit
4
4
4
4
1
1
1
1
Single
3
3
3
3
Ø32 (Ø1 1/4″)
-
-
-
-
Ø40 (Ø1 1/2″)
-
-
-
-
Straight Mill Holder
Standard
1
1
1
1
Angular Mill Holder
Standard
1
1
1
1
Ø8 (Ø5/16″)
1
1
1
1
Ø10 (Ø3/8″)
1
1
1
1
Ø12 (Ø1/2″)
1
1
1
1
Ø16 (Ø5/8″)
1
1
1
1
Ø20 (Ø3/4″)
1
1
1
1
U-Drill Holder
Boring Socket
Drill
MT 1 × MT 2
-
-
-
-
MT 2
-
-
-
-
Opt.
Opt.
Opt.
Opt.
ER Collet
Specifications are subject to change without notice for improvement.
Specifications Interference
SE2000A/PA SE2000C/PC
SE2000 Series
ø165 (ø6.5 ø210 ) (ø8 .27)
79 ø5 2.8) 2 20 ) (ø 5 5 ø 0. 2 (ø
CNC Turning Center
ø (ø1 350 3.8 )
0 ø4 57) . 2 ) (ø1 3 ø 26 1. (ø
HYUNDAI WIA MACHINE TOOL
unit : mm(in)
2 ø14 ) 6 (ø5.
5 ø9 82) 3. (ø
ø15 0 (ø 5.9) ø97 (ø3.8 )
ø95 (ø3. 7)
5 ø15 ) .1 (ø6
55 ø1 .1) 6 (ø
ø16 0 (ø6. 3)
Experience the new Technology
22 + 23
SE2000MA SE2000MC
Specifications Tooling Travel Range
lYWWhOwhP unit : mm(in)
SE2000A/PA
O.D. Tool holder
210 (8.2) (X-axis st.)
190 (7.5)
20 (0.8) 45 (1.8)
Ø169(6")
Tail Stock
91 32 88 (3.4) 80 (3.1) 160 (6.3) (3.6) (1.2) (Quill st.) (Tail Stock st.)
120.8 (4.7)
91 32 (3.6) (1.2)
20 (0.8) 75 (3)
80 (3.1)
Ø32 (1.3)
75 (3)
428 (16.8) (Spindle-Disk) 408 (16) (PA) 330 (13) (Z-axis st.) 310 (12.2) (PA)
104 (4)
93 (3.6)
91 32 (3.6) (1.2)
45 (1.8)
80 (3.1)
I.D. Tool holder (with Tail Stock)
20 (0.8) 45 (1.8)
25 (1)
91 32 (3.6) (1.2)
Ø32 (Ø1.3)
428 (16.8) (Spindle-Disk) 408 (16) (PA) 330 (13) (Z-axis st.) 310 (12.2) (PA)
190 (7.5)
35 (3.4)
I.D. Tool holder
20 (0.8)
Ø169 (6")
190 (7.5)
45 (1.8)
210 (8.2) (X-axis st.)
210 (8.2) (X-axis st.)
25 (1)
91 32 (3.6) (1.2)
93 (3.6)
428 (16.8) (Spindle-Disk) 408 (16) (PA) 330(13) (Z-axis st.) 310 (12.2) (PA) 330 (13) (Max. Turning Length) 310 (12.2) (PA) 7 (0.3)
190 (7.5)
45 (1.8)
91 (3.6)
20 (0.8)
Ø169 (6")
210 (8.2) (X-axis st.)
35 (3.4)
91 (3.6)
O.D. Tool holder (with Tail Stock)
428 (16.8) (Spindle-Disk) 408 (16) (PA) 330 (13) (Z-axis st.) 310 (12.2) (PA) 330 (13) (Max. Turning Length) 310 (12.2) (PA) 7 (0.3)
Specifications
lYWWjOwjP
unit : mm(in)
HYUNDAI WIA MACHINE TOOL
Tooling Travel Range
SE2000C/PC
O.D. Tool holder
112(4.4)
449(17.6) (Spindle-Disk) 429(16.8) (PC) 330(13) (Z-axis st.) 310(12.2) (PC)
SE2000 Series
CNC Turning Center
25 (1) 20 (0.8)
20 (0.8)
Ø210(8")
Tail Stock
39 54.2 80 (3.1) 160 (6.3) (1.5)(2.1) (Quill st.) (Tail Stock st.)
120.8 (4.7)
112 (4.4)
39 (1.5)
124 (4.9)
157 (6.2)
Ø40 (1.6) 90(3.5)
Experience the new Technology
24 + 25
449(17.6) (Spindle-Disk) 429(16.8) (PC) 330(13) (Z-axis st.) 310(12.2) (PC)
Ø210 (8") 45 (1.8)
112 (4.4)
25 (1)
39 (1.5)
68 (2.7)
Ø40 (1.6)
157 (6.2) 53 (2.1)
210 (8.2) (X-axis st.)
Ø210 (8")
114(4.5)
39 (1.5)
45 (1.8)
55 (2.2)
25 (1)
I.D. Tool holder (with Tail Stock)
449 (17.6) (Spindle-Disk) 429 (16.8) (PC) 114 (4.5) 330 (13) (Z-axis st.) 310(12.2) (PC)
112 (4.4)
112 (4.4)
190 (7.5)
35 (3.4) 45 (1.8)
I.D. Tool holder
45 (1.8)
210 (8.2) (X-axis st.)
Ø210 (8")
190(7.5)
39 (1.5)
53 (2.1)
112 (4.4)
25 (1)
210 (8.2) (X-axis st.)
45 (1.8)
7 (0.3)
20 (0.8)
Ø210 (8")
210 (8.2) (X-axis st.)
35 (3.4)
7 (0.3)
68 (2.7)
112(4.4)
O.D. Tool holder (with Tail Stock)
449(17.6) (Spindle-Disk) 429(16.8) (PC) 330(13) (Z-axis st.) 310(12.2) (PC)
Specifications
lYWWth
Tooling Travel Range
unit : mm(in)
SE2000MA O.D. Tool holder (with Tail Stock)
I.D. Tool holder (with Tail Stock)
437(17.2) (Spindle-Disk)
437(17.2) (Spindle-Disk)
286(11.2) (Z-axis st.)
91(3.6)
76
286(11.2) (Z-axis st.)
91 32 (3.6) (1.2)
45 (1.8)
Straight Milling Head (with Tail Stock)
11 8 (0.4) (0.3)
20 (0.8) 44 (1.7)
205(8)
437(17.2) (Spindle-Disk)
91 32 (3.6) (1.2)
Ø169(6") 45 (1.8)
2765(2.5) 29 (1) (1.1)
35(1.4) 11 8 (0.4) (0.3)
35(1.4)
286(11.2) (Z-axis st.)
44 20 (1.7) (0.8)
81(3.2)
11 8 (0.4) (0.3)
44 20 (1.7) (0.8)
210 (8.2) (X-axis st.) 205(8)
5 (0.2)
Ø169(6") 45 (1.8)
210 (8.2) (X-axis st.)
Angular Milling Head (with Tail Stock)
286(11.2) (Z-axis st.)
27 65(2.5)29 (1) (1.1)
35(1.4)
91 32 (3.6) (1.2)
437(17.2) (Spindle-Disk) 65 (2.5)
27 65(2.5)29 (1) (1.1)
5 (0.2)
Ø169(6")
44 20 (1.7) (0.8)
11 8 (0.4) (0.3)
145(5.7)
35(1.4)
210 (8.2) (X-axis st.) 29 181(7.1) (1.1)
45 (1.8)
2765(2.5) 29 (1) (1.1)
65(2.7)
Ø169(6")
210 (8.2) (X-axis st.)
286(11.2) (Max. Turning Length)
91 32 (3.6) (1.2)
Face Tool holder 437(17.2) (Spindle-Disk) 56 (2.2)
286(11.2) (Z-axis st.)
91 32 (3.6) (1.2)
Ø169(6")
44 20 (1.7) (0.8)
Ø169(6") 45 (1.8)
35(1.4) 11 8 (0.4) (0.3)
210 (8.2) (X-axis st.) 51 159(6.2) (2)
Tail Stock 2765(2.5) 29 (1) (1.1)
45 (1.8)
91 32 88(3.4) 80(3.1) 160(6.3) (3.6) (1.2) (Quill st.) (Tail Stock st.)
120.8(4.7
Specifications
lYWWtj
SE2000MC O.D. Tool holder (with Tail Stock)
I.D. Tool holder (with Tail Stock)
112 (4.4)
39 (1.5)
112 (4.4)
11 8 (0.4) (0.3)
205 (8.1)
44 20 (1.7) (0.8) 27 65(2.5) 29 (1) (1.1)
35(1.4) 11 8 (0.4) (0.3)
Ø210(8") 45 (1.8)
286(11.2) (Z-axis st.)
44 20 (1.7) (0.8)
35(1.4) 11 8 (0.4) (0.3)
20 (0.8) 44 (1.7)
210 (8.2) (X-axis st.) 205 (8.1)
102 (4)
39 (1.5)
Face Tool holder 458(18) (Spindle-Disk) 77 (3)
286(11.2) (Z-axis st.)
112 (4.4)
39 (1.5)
Ø210(8")
44 20 (1.7) (0.8)
Ø210(8") 45 (1.8)
35(1.4) 11 8 (0.4) (0.3)
210 (8.2) (X-axis st.) 51 159 (6.3) (2)
Tail Stock 27 65(2.5)29 (1) (1.1)
26 + 27
458(18) (spindle-disk)
286(11.2) (Z-axis st.)
5
Ø210(8") 45 (1.8)
39 (1.5)
Angular Milling Head (with Tail Stock)
458(18) (Spindle-Disk)
2765(2.5) 29 (1) (1.1)
SE2000 Series
112 (4.4)
35(1.4)
5 (0.2)
Ø210(8") 45 (1.8)
2765(2.5) 29 (1) (1.1)
CNC Turning Center
39 (1.5)
Straight Milling Head (with Tail Stock)
86 (3.3)
286(11.2) (Z-axis st.)
35(1.4) 11 8 (0.4) (0.3)
2765(2.5) 29 (1) (1.1) 44 20 (1.7) (0.8)
145
97 (3.8)
210 (8.2) (X-axis st.) 29 181 (7.1) (1.1)
112 (4.4)
65
210 (8.2) (X-axis st.)
Ø210(8") 45 (1.8)
458(18) (Spindle-Disk)
286(11.2) (Z-axis st.)
112(4.4)
210 (8.2) (X-axis st.)
458(18) (Spindle-Disk)
HYUNDAI WIA MACHINE TOOL
unit : mm(in)
45 (1.8)
112 (4.4)
39 54.2 80(3.1) 160(6.3) (1.5) (2.1) (Quill st.) (Tail Stock st.)
120.8(4.7)
Experience the new Technology
Tooling Travel Range
Specifications Specifications
[
ITEM
CAPACITY
SE2000A mm(in)
Ø550 (21.7″)
Swing Over the Carriage
mm(in)
Ø350 (13.8″)
Max. Turning Dia.
mm(in)
Ø350 (13.8″)
Ø290 (11.4″)
Ø350 (13.8″)
Max. Turning Length
mm(in)
300 (11.8″)
255 (10″)
280 (11″)
Bar Capacity
mm(in)
Motor (Max/Cont.)
r/min kW(HP)
Spindle Torque (Max/Cont.)
15/11 (20.1/14.8)
15/11 (20.1/14.8) [10.8/9 (14.5/12)]
95.5/52.5 (70.4/38.7) [75.6/68.7 (55.8/50.7)]
95.5/52.5 (70.4/38.7)
95.5/52.5 (70.4/38.7) [75.6/68.7 (55.8/50.7)]
BELT A2-5
deg mm(in)
Rapid Traverse Rate (X/Z)
Tool Size
-
0.001˚
-
210/330 (8.3″/13″)
210/286 (8.3″/11.3″)
210/310 (8.3″/12.2″)
m/min(ipm) -
36/36 (1,417/1,417)
24/24 (945/945)
LM GUIDE
BOX GUIDE 12
EA
OD ID
mm(in)
□25 (1″)
□20 (0.8″)
□25 (1″)
Ø32 (1.3″)
mm(in)
Indexing Time
sec/step
0.12
0.23
0.12
Motor (Cont.)
kW(HP)
-
3 (4)
-
r/min
-
4,500
-
N・m(lbf・ft)
-
22.5/10 (16.6/7.4)
-
mm(in)
-
Ø16 (0.6″) ER25
-
-
-
VDI30
-
Milling Tool Speed (rpm) Torque (Max/Cont.) Collet Size Type Taper
NC
15/11 (20.1/14.8) [10.8/9 (14.5/12)]
-
No. of Tools
Machine
6,000 [6,000]
Spindle Nose
Slide Type
power Supply
N・m(lbf・ft)
6,000
-
C-axis Indexing
tank Capacity
Ø61 (2.4″) 6,000 [6,000]
Spindle Type
Travel (X/Z/B)
TAIL STOCK
6″
mm(in)
Spindle Speed (rpm)
live tool
Ø51 (2″)
inch
Spindle Bore
turret
SE2000PA
Swing Over the Bed
Chuck Size
Feed
SE2000MA
MT4
-
Ø65 (2.6″)
Quill Dia.
mm(in)
Quill Travel
mm(in)
80 (3.1″)
Travel
mm(in)
160 (6.3″)
Coolant Tank
ℓ(gal)
135 (35.7)
Lubricating Tank
ℓ(gal)
1.8 (0.5)
Electric Power Supply Thickness of Power Cable Voltage
17
kVA
OVER 16
Sq
220/60 (200/50*)
V/Hz
Floor Space (L×W)
mm(in)
2,020×1,763 (79.5″×69.4″)
Height
mm(in)
1,820 (71.7″)
Weight
kg(lb)
Controller
-
] : Option
3,800 (8,378) HYUNDAI WIA FANUC i Series [SE2000A/PA : HYUNDAI-iTROL]
*) Using 50Hz voltage instead of 60Hz may lower the output of motors. (excluding servo motors and inverter motors) Specifications are subject to change without notice for improvement.
Specifications [
Swing Over the Carriage
mm(in)
Ø350 (13.8″)
Max. Turning Dia.
mm(in)
Ø350 (13.8″)
Ø290 (11.4″)
Ø350 (13.8″)
Max. Turning Length
mm(in)
300 (11.8″)
255 (10″)
280 (11″)
Bar Capacity
mm(in)
r/min kW(HP)
Spindle Torque (Max/Cont.)
15/11 (20.1/14.8)
15/11 (20.1/14.8) [10.8/9 (14.5/12)]
167/92 (123.2/67.9) [132.3/110.3 (97.6/81.4)]
167/92 (123.2/67.9)
167/92 (123.2/67.9) [132.3/110.3 (97.6/81.4)]
BELT
-
A2-6
deg mm(in)
Rapid Traverse Rate (X/Z)
Tool Size
-
0.001˚
-
210/330 (8.3″/13″)
210/286 (8.3″/11.3″)
210/310 (8.3″/12.2″)
m/min(ipm)
36/36 (1,417/1,417)
24/24 (945/945)
LM GUIDE
BOX GUIDE
-
No. of Tools
12
EA
OD
mm(in)
□25 (1″)
□20 (0.8″)
□25 (1″)
mm(in)
Ø40 (1.6″)
Ø32 (1.3″)
Ø40 (1.6″)
Indexing Time
sec/step
0.12
0.23
0.12
Motor (Cont.)
kW(HP)
-
3 (4)
-
r/min
-
4,500
-
N・m(lbf・ft)
-
22.5/10 (16.6/7.4)
-
mm(in)
-
Ø16 (0.6″) ER25
-
-
-
VDI30
-
ID
Milling Tool Speed (rpm) Torque (Max/Cont.) Collet Size Type Taper
NC
15/11 (20.1/14.8) [10.8/9 (14.5/12)]
Spindle Nose
Slide Type
Machine
4,500 [4,500]
-
Travel (X/Z/B)
power Supply
N・m(lbf・ft)
4,500
Spindle Type
C-axis Indexing
tank Capacity
Ø76 (3″) 4,500 [4,500]
MT4
-
Ø65 (2.5″)
Quill Dia.
mm(in)
Quill Travel
mm(in)
80 (3.1″)
Travel
mm(in)
160 (6.3″)
Coolant Tank
ℓ(gal)
135 (35.7)
Lubricating Tank
ℓ(gal)
1.8 (0.5)
Electric Power Supply Thickness of Power Cable Voltage
17
kVA
OVER 16
Sq
220/60 (200/50*)
V/Hz
Floor Space (L×W)
mm(in)
2,050×1,763 (80.7″×69.4″)
Height
mm(in)
1,820 (71.7″)
Weight
kg(lb)
Controller
-
3,800 (8,378) HYUNDAI WIA FANUC i Series [SE2000C/PC : HYUNDAI-iTROL]
*) Using 50Hz voltage instead of 60Hz may lower the output of motors. (excluding servo motors and inverter motors) Specifications are subject to change without notice for improvement.
SE2000 Series
Motor (Max/Cont.)
TAIL STOCK
8″
mm(in)
Spindle Speed (rpm)
live tool
Ø65 (2.6″)
inch
Spindle Bore
turret
SE2000PC
Ø550 (21.7″)
Chuck Size
Feed
SE2000MC
mm(in)
CNC Turning Center
CAPACITY
SE2000C
Swing Over the Bed
28 + 29
Experience the new Technology
ITEM
] : Option
HYUNDAI WIA MACHINE TOOL
Specifications
Controller HYUNDAI-iTROL (SE2000A/PA | SE2000C/PC) Control & Composition
Compensation
Number of axis/Spindles
2 axes (X, Z) / 3 axes (X, Z, C)
Backlash compensation
Number of axis/Spindles, max.
8 axes (Axis + Spindle)
Leadscrew error compensation
Color display
TFT 10.4" Color (800 x 600)
Measuring system error compensation
Keyboard
QWERTY Full Keyboard
Feedforward control (Speed control)
Part program storage
1MB, 3MB, 5MB
Safety Function
Addition of part program on CF card
Safe torque off (STO)
Transfer Function
Safe brake control (SBC)
Feedrate override
0% ~ 200%
Safe stop 1 (SS1)
Transfer value input range
Âą 999999999
Diagnostic Function
Unlimited rotation of rotation axis
Alarm/Message , Alarm log
Acc./Dec. with jerk limitation
PLC status/LAD online display
Measuring systems 1 and 2, selectable
PLC remote connection (Ethernet)
Travel to fixed stop
Automation Support Function
Auto servo drive tuning
Actual velocity display
Spindle Function
Tool life management
As time / As amount
Spindle override
0% ~ 150%
Work counter/Cycle time
Embedded
Spindle speed, max. programmable value range
1000000 ~ 0.0001
2D simulation
Automatic gear stage selection
Manual Operation
Spindle orientation
Manual handle/Jog transfer
Spindle speed limitation
Manual measurement of workpiece / tool offset
Rigid tapping
Automatic tool/Workpiece measurement
Spindle control with PLC
Automatic/Program reference approach
Interpolation Linear interpolation axis, max.
Automatic Operation 4 axis
Program run as using CF card/USB
Circle via center point and end point
Program control/modification
Circle via interpolation point
Block search
Helical interpolation
Reposition
Non-uniform rational B splines
Preset (Set actual value)
Continuous - path mode with programmable rounding clearance
Data Transmission Ethernet network
Program Function
USB memory stick & CF card
Subroutine levels, max.
7
Interrupt routines, max.
2
Number of levels for skip blocks
2
Convenience Function Processing setting
Coordinate system setting, Auto tool length measurement
Polar Coordinates
Processing support
Tool Monitoring, Spindle overload monitoring
Dimensions inch/metric, changeover manually or via program
Maintenance
Turret Guidance, I/O monitoring, Manual
Management
Soft MCP, M/G code List
Dynamic preprocessing memory FIFO
SMART machining
Look ahead
1
Energy saving function (ECO)
Absolute/Incremental command
G90 / G91
Machine Monitoring System (MMS Lite)
Scaling/Rotation
Language
Read/Write system variables
Standard support language
Chinese Simplified, English, Korean
Block search Option
Edit background Processing program number, max.
750
Using of CF Card, USB
Maximum skip block number
Basic coordinate number, max.
1
MDI program save/load
Work coordinate number, max.
100
Teach-In mode
Basic/Work coordinate programming change
3D simulation
Scratching function
Real time simulation
Global and Local user data (GUD/LUD)
Shop Turn
Global program user data
Spline interpolation
Conversational Cycle Program
Program remote control in network
Tool Function
Language
Tool radius compensations Tool offset selection via T/D numbers Tools / Cutting edges in tool list
10
DRF offset
128 / 256, 256 / 512
Monitoring Function Working area limit Software and Hardware limit Zero-speed/Clamping monitoring 2D/3D protection zones Contour monitoring
Figures in inch are converted from metric values. Specifications are subject to change without notice for improvement.
Except for working area/Collision check Conversational Program
Chinese Traditional, French, German, Italian, Portuguese, Spanish
Controller
Least setting Unit Least input increment Inch / Metric conversion High response vector control Interlock Machine lock Backlash compensation Position switch LCD / MDI Feedback Stored stroke check 1 Stored stroke check 2, 3 PMC axis control Operation Automatic operation (Memory) MDI operation DNC operation Program restart Wrong operation prevention Program check function Single block Search function Interpolation functions Nano interpolation Positioning Linear interpolation Circular interpolation Exact stop mode Dwell Skip Reference position return
All axes / Each axis All axes ± 0 ~ 9999 pulses (Rapid traverse / Cutting feed) 8.4 inch / 10.4 inch color LCD Absolute motor feedback Over travel
Needed DNC software / CF card
Dry run Program Number / Sequence Number
G00 G01 G02, G03 Single : G09, Continuous : G61 G04, 0 ~ 9999.9999 sec G31 1st reference : G28 2nd reference : G30 Ref. position check : G27
Thread synchronous cutting Thread cutting retract Variable lead thread cutting Multi / Continuous threading Feed function / Acc. & Dec. control Manual feed Cutting Feed command Feedrate override Rapid traverse override Override cancel Feed per minute Feed per revolution Look-ahead block Program input Tape Code Optional block skip Absolute / Incremental program Program stop / end Maximum command unit Plane selection Workpiece coordinate system Manual absolute Programmable data input Sub program call Custom macro G code system Programmable mirror image G code preventing buffering Direct drawing dimension program
Rapid traverse Jog : 0~2,000 mm/min (79 ipm) Manual handle : x1, x10, x100 pulses Reference position return Direct input F code 0 ~ 200% (10% Unit) F1%, F5%, F25% / 50%, F100% G98 G99 1 block EIA / ISO 1 ea G90 / G91 M00, M01 / M02, M30 ± 999,999.999 mm (± 99,999.9999 inch) X-Y : G17 / Z-X : G18 / Y-Z : G19 G52, G53, 6 pairs (G54 ~ G59) Fixed ON G10 10 folds nested #100 ~ #149, #500 ~ #549 A G51.1, G50.1 G4.1 Including Chamfering / Corner R
Multiple repetitive cycles Ⅰ, Ⅱ Canned cycle for turning Auxiliary function / Spindle speed function Auxiliary function Level-up M Code Spindle speed function Spindle override Multi position spindle orientation Rigid tapping Constant surface speed control Tool function / Tool compensation Tool function Tool life management Tool offset pairs Tool nose radius compensation Geometry / Wear compensation Direct input of offset measured B Editing function Part program storage size No. of registerable programs Program protect Background editing Extended part program editing Memory card program edit Data input / output & Interface I/O interface Screen hard copy External message External key input External workpiece number search Automatic data backup Setting, display and diagnosis Self-diagnosis function History display & Operation Run hour / Parts count display Maintenance information Actual cutting feedrate display Display of spindle speed / T code Graphic display Operating monitor screen Power consumption monitoring Spindle / Servo setting screen Multi language display Display language switching LCD Screen Saver Unexpected disturbance torque Function for machine type Cs contour control (C & A axes) Polar coordinate interpolation Cylindrical interpolation Canned cycle for drilling Spindle orientation expansion Spindle synchronous control Torque control Y axis offset Arbitrary angular control Composite / Superimposed control Balance cutting Option Optional block skip Fast ethernet Data server Protection of data at 8 levels Tool offset pairs Part program storage size Polygon turning (2 Spindles) Helical interpolation Manual Guide i Dynamic graphic display
Figures in inch are converted from metric values. The FANUC controller specifications are subject to change based on the policy of company CNC supplying.
M 4 digit High speed / Multi / Bypass M code S & 4 digit , Binary output 0% ~ 150% (10% Unit) M 19 G96, G97 Tool Number 2 digit + Offset 2 digit 64 pairs G40, G41, G42
1280m (512KB) 1000 ea
Copy, move and change of NC program
RS 232C serial port, CF card, USB memory Embedded Ethernet interface
Alarm & Operator message & Operation
Spindle / Servo load etc. Spindle & Servo Support 20 languages Selection of 5 optional Languages Screen saver BST (Back spin torque limit) Mill, MS, Y, SY, LF-Mill, TTMS, TTSY Mill, MS, Y, SY, LF-Mill, TTMS, TTSY Mill, MS, Y, SY, LF-Mill, TTMS, TTSY Mill, MS, Y, SY, LF-Mill, TTMS, TTSY MS, SY TTS, TTMS, TTSY MS, SY TTS, TTMS, TTSY MS, SY TTS, TTMS, TTSY Y, SY, TTSY Y, SY, TTSY MS, SY TTS, TTMS, TTSY MS, SY TTS, TTMS, TTSY
9 ea Needed option board Needed option board 200 pairs 5120m (2MB) Mill, MS, Y, SY, LF-Mill, TTMS, TTSY Conversational auto program
SE2000 Series
Simultaneously controlled axes Designation of spindle axes
2 axes (X, Z) / 3 axes (X, Z, C / X, Z, B) / 4 axes (X, Z, Y, C) 5 axes (X, Z, B, C, A) / 6 axes (X, Z, Y, B, C, A) 2 axes [Max. 4 axes] 3 axes (1 path) X, Z, Y, B axes : 0.001 mm (0.0001 inch) C, A axes : 0.001 deg X, Z, Y, B axes : 0.001 mm (0.0001 inch) C, A axes : 0.001 deg G20 / G21
] : Option
CNC Turning Center
Control axes
[ Program input
30 + 31
Experience the new Technology
Controlled axis / Display / Accuracy Compensation
HYUNDAI WIA MACHINE TOOL
HYUNDAI WIA FANUC i Series
Global Network
Hyundai WIA Machine Tools America
Hyundai WIA Machine Tools Europe TECH CUBE
BEIJING BRANCH OFFICE
HEADQUARTER
WUHAN OFFICE QINGDAO OFFICE CHENGDU BRANCH OFFICE
INDIA BRANCH OFFICE
JIANGSU HYUNDAI WIA Hyundai WIA Machine Tools China SHANGHAI BRANCH OFFICE
GUANGZHOU BRANCH OFFICE
Headquarter Changwon Technical Center / R&D Center / Factory 153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Korea (Zip Code : 51533) TEL : +82 55 280 9114 FAX : +82 55 282 9680
HYUNDAI WIA MACHINE TOOL
Global Network
Uiwang Technical Center / R&D Center
450 Commerce Blvd. Carlstadt, NJ 07072 TEL : +1 630 625 5600
HYUNDAI WIA Machine Tools Europe TECH CUBE Alexander-Fleming-Ring 57, 65428 Rüsselsheim Germany TEL: +49 6142 9256 0 FAX: +49 6142 9256 100
Jiangsu HYUNDAI WIA
Chengdu Branch Office
Company No.6 Fenghuang Road, Fenghuang Town, Zhangjjagang City, Jiangsu province, China
NO.508 Room, B Block, AFC Plaza, NO.88 Jiaozi Road, High-tech Zone, Chengdu, China
TEL : +86 512 5672 6808 FAX : +86 512 5671 6960
TEL : +86 028 8665 2985 FAX : +86 028 8665 2985
Hyundai WIA Machine Tools China Shanghai Branch Office
Qingdao Office
2-3F, Bldg6, No.1535 Hongmei Road, Xuhui District, Shanghai, China TEL : +86 021 6427 9885 FAX : +86 021 6427 9890
Room 1207, Cai Fu Building, 182-6 Haier Middle Road, Qingdao, China TEL : +86 0532 8667 9334 FAX : +86 0532 8667 9338
India Branch Office
Beijing Branch Office
Wuhan Office
#4/169, Rajiv Gandhi Salai, (OMR), Kandanchavadi, Chennai-600 096, Tamilnadu, India
Floor 14, Zhonghangji Plaza B, No.15 Ronghua South Road, BDA Dist., Daxing Dist., Beijing, China 100176
Room 302, B Tower, Nova Center, Dongfeng Three Road, Zhuankou, Wuhan, Hubei, China
TEL: +91-44-3290-1719
TEL : +86 010 8453 9850 FAX : +86 010 8453 9853
TEL : +86 027 5952 3256 FAX : +86 027 5952 3256
SE2000 Series
Hyundai WIA Machine Tools America
32 + 33
Experience the new Technology
OVERSEAS OFFICES
CNC Turning Center
37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do, Korea (Zip Code : 16082) TEL : +82 31 596 8213 Fax : +82 55 210 9804
SE2000A Movie
SE2000C Movie
http://machine.hyundai-wia.com Head Office & Factory 153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do
Tel +82 55 280 9500
Overseas Sales Team 16F, 37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do
Tel +82 31 596 8213
Hyundai WIA Machine Tools America 450 Commerce Blvd. Carlstadt, NJ 07072
Tel +1 (630) 625 5600
HYUNDAI WIA Machine Tools Europe TECH CUBE Alexander-Fleming-Ring 57, 65428 Rüsselsheim Germany Tel +49 6142 9256 0 Fax +49 6142 9256 100 India Branch Office #4/169, Rajiv Gandhi Salai, (OMR), Kandanchavadi, Chennai-600 096, Tamilnadu, India
Tel +91 44 3290 1719 2019-08 001.011 ENG