REGGIANI PART2 by ORION GRUP

PROJECTORS

Sunluce / Sunios Adjustable projectors

Museo Centrale del Risorgimento â&#x20AC;&#x201C; Roma 251

Varios

PROJECTORS

Adjustable projector

Design: L Nome A P DCognome

Varios Varios is an aluminium, track-mounted or surfacemounted adjustable projector; the whole luminaire has optimum aesthetic balance of the volumes as a result of keeping the control gear and lighting body separate to favour the best heat dissipation. Varios comes in two sizes and two versions, with vertical or â&#x20AC;&#x153;ďŹ&#x201A;atâ&#x20AC;? control gear.

252

Varios is a track-mounted or surface-mounted projector with manual or power-driven and remotecontrolled adjustment. The whole luminaire has optimum aesthetic balance of the volumes as a result of keeping the control gear and optical compartment separate to favour the best heat dissipation.

PROJECTORS

Varios Adjustable projector

Corot and modern art: Souvenirs et Impressions Verona, Italy Palazzo della Gran Guardia, 27 November 2009 - 7 March 2010 by kind permission of the Museums of Art and Monuments ofďŹ ce, Municipality of Verona. Layout by Alba Di Lieto and Nicola Brunelli

253

Varios

PROJECTORS

Adjustable projector STANDARD FINISHES 10 white 21 black 28 metallised grey BODY Two elements in die-cast aluminium, held together by a joint that enables utmost adjustment of the luminaire, house the control gear and the optical compartment, which is fitted with a passive heat sink that exploits the thermal conductivity of the aluminium and the convection current generated by virtue of the temperature difference in the air around the heat sink, ensuring perfectly efficient and longlasting light sources. OPTICS IOS system (Interchangeable Optical System) Instant interchangeability, a full range of beams and high efficiency (up to d 90). INSTALLATION OF TRACK-MOUNTED PROJECTORS Projectors complete with adapter for mounting on Reggiani 3-circuit track. (The compatibility of the adapter with the various 3-circuit tracks available on the market will require prior verification). INSTALLATION OF SURFACE-MOUNTED PROJECTORS Luminaires complete with base plate for surface mounting DEGREE OF PROTECTION IP20/40. SIZES: “FLAT” VERSIONS: Ø 137 mm, protrusion of 175 mm or Ø 195 mm, protrusion of 155 mm. VERTICAL CONTROL GEAR: Ø 95 mm, protrusion of 208 mm or Ø 95 mm, protrusion of 219 mm. ADJUSTMENT “Flat” version: 356° in the horizontal axis; from -120° to +45° in the vertical axis. Version with vertical control gear: 356° in the horizontal axis; from -135° to +45° in the vertical axis.

254

Built-in anti-glare shield for utmost visual comfort

Varios

PROJECTORS

Adjustable projector

POWER-DRIVEN ADJUSTMENT Horizontal 356°, vertical 135°; remote-controlled motor-driven adjustment. “Licensed technology: Remote Controlled Lighting Limited”. Smooth, precise movement, with electronic limit switch to prevent mechanical stress or overheating.

The radio frequency remote control with laser pointer (proposed as accessory) can adjust a single luminaire, selected luminaires or the entire installed series, up to a distance of 25 metres.

R e m o t e C o n t r o l

±135° POWER-DRIVEN ADJUSTMENT ±135° in the vertical axis

356°

356° in the horizontal axis

255

Varios

PROJECTORS

Adjustable projector

Varios RE LED LUCE incorporates the best high efﬁciency LEDs (up to 4295 lm, 108 lm/W) with varying tones of excellent white (3000K 4000K, CRI from 84 to 94). Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous ﬂux). For 3-circuit track

Surface-mounted version

Optics

Control gear technologies

IOS reflectors with Ø 80 mm (LL2) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%). The shield is clear for very narrow beams, satin for narrow, medium and wide beams and satin/prismatic for the Wall Washer Mira version. There are also versions with gold optics or with selective filters for lighting foodstuffs.

IOS reflectors with Ø 80 mm (LL2 and LL7) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%). The shield is clear for very narrow beams, satin for narrow, medium and wide beams and satin/prismatic for the Wall Washer Mira version. There are also versions with gold optics or with selective filters for lighting foodstuffs.

High efﬁciency driver 85% and a power factor of nearly 1 assure real energy savings. The robustness of the control gear is assured up to Ta 70°C and Tc 90°C and guarantees a lifetime of over 50,000 h.. The Re Led Luce system includes drivers with diversiﬁed dimming features, to meet the widest design demands.

For Re Led Luce 14W

256

• Non-dimmable driver (120 or 240V AC/DC).

For Re Led Luce 26W

• Non-dimmable driver (108-264V AC/DC). • Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%. • Driver (198-265V) with DALI dimming protocol to dim luminaires separately or together (luminous intensity adjustment from 100% to 5%) and to digitally switch them on/off. Stand-by mode (consumption 0.3W).

For Re Led Luce 32W

• Non-dimmable driver (108-264V AC/DC). • Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%

For Re Led Luce 39W

• Non-dimmable driver (108-264V AC/DC). • Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%.

Varios

PROJECTORS

Adjustable projector

For IOS versions with metal halide lamps. For IOS versions with halogen lamps.

For versions with low voltage halogen lamp with built-in reﬂector.

99.99% pure aluminium IOS reflector with Ø 80 / 130 mm, twist-lock fixing system and tempered safety glass (clear for narrow beams, microsphere for medium and wide beams, prismatic for the Wall Washer Mira version). There are also versions with gold optics, selective filters for lighting foodstuffs or coloured dichroic filters.

Reﬂector incorporated in the lamp.

HF control gear for metal halide lamps with ceramic technology in a unit that is thermally independent from the optical compartment.

Adjustable projector with IOS optics, LED LUCE and control gear technology

HF control gear for metal halide lamps with ceramic technology in a unit that is thermally independent from the optical compartment. Electronic transformer for low voltage halogen lamps in a unit that is thermally independent from the optical compartment.

257

Varios

PROJECTORS

Adjustable projector

Varios Adjustable projector with IOS optics, LED LUCE and control gear technology

For 3-circuit track 1x14W

183 90 860lm 3000K CRI 90

995lm 3000K CRI 85

1100lm 4000K CRI 85

2x 6°

0. 32313.HQ

0. 32313.WW

0. 32313.NN

2x 8°

0. 32312.HQ

0. 32312.WW

0. 32312.NN

2x11°

0. 32314.HQ

0. 32314.WW

0. 32314.NN

2x15°

0. 32315.HQ

0. 32315.WW

0. 32315.NN

2x26°

0. 32316.HQ

0. 32316.WW

0. 32316.NN

W. W. Mira

0. 32317.HQ

0. 32317.WW

0. 32317.NN

2x 6°

0. 32330.HQ

0. 32330.WW

0. 32330.NN

2x 8°

0. 32328.HQ

0. 32328.WW

0. 32328.NN

2x11°

0. 32331.HQ

0. 32331.WW

0. 32331.NN

2x15°

0. 32332.HQ

0. 32332.WW

0. 32332.NN

2x26°

0. 32333.HQ

0. 32333.WW

0. 32333.NN

W. W. Mira

0. 32334.HQ

0. 32334.WW

0. 32334.NN

2x 6°

0. 32250.HQ

0. 32250.WW

0. 32250.NN

2x 8°

0. 32249.HQ

0. 32249.WW

0. 32249.NN

2x11°

0. 32251.HQ

0. 32251.WW

0. 32251.NN

2x15°

0. 32252.HQ

0. 32252.WW

0. 32252.NN

2x26°

0. 32253.HQ

0. 32253.WW

0. 32253.NN

W. W. Mira

0. 32254.HQ

0. 32254.WW

0. 32254.NN

2x 6°

0. 32320.HQ

0. 32320.WW

0. 32320.NN

2x 8°

0. 32318.HQ

0. 32318.WW

0. 32318.NN

2x11°

0. 32321.HQ

0. 32321.WW

0. 32321.NN

2x15°

0. 32322.HQ

0. 32322.WW

0. 32322.NN

2x26°

0. 32323.HQ

0. 32323.WW

0. 32323.NN

W. W. Mira

0. 32324.HQ

0. 32324.WW

0. 32324.NN

140 ø 95

Version: Non-dimmable

Surface-mounted version 183 90 140 ø 95

Version: Non-dimmable

For 3-circuit track

183 90 133

200 ø 95

Version: Non-dimmable

Surface-mounted version 183 90 200

155 133

ø 95

Version: Non-dimmable

258

The technology used in LEDs is progressing so rapidly that their efﬁciency is constantly improving. The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated speciﬁcaations.

Varios

PROJECTORS

Adjustable projector

Varios with power-driven adjustment Projector with power-driven adjustment, IOS optics, LED LUCE and control gear technology

For 3-circuit track 224 131

1x14W 860lm 3000K CRI 90

995lm 3000K CRI 85

1100lm 4000K CRI 85

2x 6°

0. 32466.HQ

0. 32466.WW

0. 32466.NN

2x 8°

0. 32464.HQ

0. 32464.WW

0. 32464.NN

2x11°

0. 32467.HQ

0. 32467.WW

0. 32467.NN

2x15°

0. 32468.HQ

0. 32468.WW

0. 32468.NN

2x26°

0. 32469.HQ

0. 32469.WW

0. 32469.NN

W. W. Mira

0. 32470.HQ

0. 32470.WW

0. 32470.NN

2x 6°

0. 32481.HQ

0. 32481.WW

0. 32481.NN

2x 8°

0. 32479.HQ

0. 32479.WW

0. 32479.NN

2x11°

0. 32482.HQ

0. 32482.WW

0. 32482.NN

2x15°

0. 32483.HQ

0. 32483.WW

0. 32483.NN

2x26°

0. 32484.HQ

0. 32484.WW

0. 32484.NN

W. W. Mira

0. 32485.HQ

0. 32485.WW

0. 32485.NN

143

210 ø 95

Version: Non-dimmable

Surface-mounted version 224 131 165

210 ø 95

Version: Non-dimmable

Visit www.reggiani.net/code to access the product datasheet.

259

Varios

PROJECTORS

Adjustable projector

Varios Adjustable projector with IOS optics, LED LUCE and control gear technology arranged horizontally (“FLAT” version)

For 3-circuit track 1x14W

204

1x26W

90 160 ø 137

Version: Non-dimmable

Version: Dimmable (1-10V DC)*

Version: DALI dimming *

860lm 3000K CRI 90

995lm 3000K CRI 85

1100lm 4000K CRI 85

2070lm 3000K CRI 94

2408lm 3000K CRI 85

2535lm 4000K CRI 84

2x 6°

0. 32410.HQ

0. 32410.WW

0. 32410.NN

0. 33251.HQ

0. 33251.WW

0. 33251.NN

2x 8°

0. 32408.HQ

0. 32408.WW

0. 32408.NN

0. 33252.HQ

0. 33252.WW

0. 33252.NN

2x11°

0. 32411.HQ

0. 32411.WW

0. 32411.NN

0. 33253.HQ

0. 33253.WW

0. 33253.NN

2x15°

0. 32412.HQ

0. 32412.WW

0. 32412.NN

0. 33254.HQ

0. 33254.WW

0. 33254.NN

2x26°

0. 32413.HQ

0. 32413.WW

0. 32413.NN

0. 33255.HQ

0. 33255.WW

0. 33255.NN

W. W. Mira

0. 32414.HQ

0. 32414.WW

0. 32414.NN

0. 33256.HQ

0. 33256.WW

0. 33256.NN

2x 6°

V. 33251.HQ

V. 33251.WW

V. 33251.NN

2x 8°

V. 33252.HQ

V. 33252.WW

V. 33252.NN

2x11°

V. 33253.HQ

V. 33253.WW

V. 33253.NN

2x15°

V. 33254.HQ

V. 33254.WW

V. 33254.NN

2x26°

V. 33255.HQ

V. 33255.WW

V. 33255.NN

W. W. Mira

V. 33256.HQ

V. 33256.WW

V. 33256.NN

2x 6°

D.33251.HQ

D.33251.WW

D.33251.NN

2x 8°

D.33252.HQ

D.33252.WW

D.33252.NN

2x11°

D.33253.HQ

D.33253.WW

D.33253.NN

2x15°

D.33254.HQ

D.33254.WW

D.33254.NN

2x26°

D.33255.HQ

D.33255.WW

D.33255.NN

W. W. Mira

D.33256.HQ

D.33256.WW

D.33256.NN

*Caution: the track-mounted projectors with dimming provision require speciﬁc adapters and tracks

Surface-mounted version 1x14W

204

1x26W

90 860lm 3000K CRI 90

995lm 3000K CRI 85

1100lm 4000K CRI 85

2070lm 3000K CRI 94

2408lm 3000K CRI 85

2535lm 4000K CRI 84

2x 6°

0. 32420.HQ

0. 32420.WW

0. 32420.NN

0. 33261.HQ

0. 33261.WW

0. 33261.NN

2x 8°

0. 32418.HQ

0. 32418.WW

0. 32418.NN

0. 33262.HQ

0. 33262.WW

0. 33262.NN

2x11°

0. 32421.HQ

0. 32421.WW

0. 32421.NN

0. 33263.HQ

0. 33263.WW

0. 33263.NN

2x15°

0. 32422.HQ

0. 32422.WW

0. 32422.NN

0. 33264.HQ

0. 33264.WW

0. 33264.NN

2x26°

0. 32423.HQ

0. 32423.WW

0. 32423.NN

0. 33265.HQ

0. 33265.WW

0. 33265.NN

W. W. Mira

0. 32424.HQ

0. 32424.WW

0. 32424.NN

0. 33266.HQ

0. 33266.WW

0. 33266.NN

160 ø 137

Version: Non-dimmable

Version: Dimmable (1-10V DC)

Version: DALI dimming

260

2x 6°

V. 33261.HQ

V. 33261.WW

V. 33261.NN

2x 8°

V. 33262.HQ

V. 33262.WW

V. 33262.NN

2x11°

V. 33263.HQ

V. 33263.WW

V. 33263.NN

2x15°

V. 33264.HQ

V. 33264.WW

V. 33264.NN

2x26°

V. 33265.HQ

V. 33265.WW

V. 33265.NN

W. W. Mira

V. 33266.HQ

V. 33266.WW

V. 33266.NN

2x 6°

D.33261.HQ

D.33261.WW

D.33261.NN

2x 8°

D.33262.HQ

D.33262.WW

D.33262.NN

2x11°

D.33263.HQ

D.33263.WW

D.33263.NN

2x15°

D.33264.HQ

D.33264.WW

D.33264.NN

2x26°

D.33265.HQ

D.33265.WW

D.33265.NN

W. W. Mira

D.33266.HQ

D.33266.WW

D.33266.NN

Varios

PROJECTORS

Adjustable projector

7 1x32W

1x39W

2420lm 3000K CRI 94

2817lm 3000K CRI 85

2980lm 4000K CRI 84

2970lm 3000K CRI 97

3955lm 3000K CRI 82

4295lm 4000K CRI 82

2x 6°

0. 33391.HQ

0. 33391.WW

0. 33391.NN

2x 8°

0. 33392.HQ

0. 33392.WW

0. 33392.NN

2x11°

0. 33281.HQ

0. 33281.WW

0. 33281.NN

2x15°

0. 33282.HQ

0. 33282.WW

2x11°

0. 33393.HQ

0. 33393.WW

0. 33282.NN

0. 33393.NN

2x18°

0. 33283.HQ

0. 33283.WW

2x15°

0. 33394.HQ

0. 33283.NN

0. 33394.WW

0. 33394.NN

2x20°

0. 33284.HQ

0. 33284.WW

2x26°

0. 33284.NN

0. 33395.HQ

0. 33395.WW

0. 33395.NN

2x34°

0. 33285.HQ

0. 33285.WW

0. 33285.NN

W. W. Mira

0. 33396.HQ

0. 33396.WW

0. 33396.NN

2x 6°

V. 33391.HQ

V. 33391.WW

V. 33391.NN

2x11°

V. 33281.HQ

V. 33281.WW

V. 33281.NN

2x 8°

V. 33392.HQ

V. 33392.WW

V. 33392.NN

2x15°

V. 33282.HQ

V. 33282.WW

V. 33282.NN

2x11°

V. 33393.HQ

V. 33393.WW

V. 33393.NN

2x18°

V. 33283.HQ

V. 33283.WW

V. 33283.NN

2x15°

V. 33394.HQ

V. 33394.WW

V. 33394.NN

2x20°

V. 33284.HQ

V. 33284.WW

V. 33284.NN

2x26°

V. 33395.HQ

V. 33395.WW

V. 33395.NN

2x34°

V. 33285.HQ

V. 33285.WW

V. 33285.NN

W. W. Mira

V. 33396.HQ

V. 33396.WW

V. 33396.NN

1x32W

1x39W

2420lm 3000K CRI 94

2817lm 3000K CRI 85

2980lm 4000K CRI 84

2970lm 3000K CRI 97

3955lm 3000K CRI 82

4295lm 4000K CRI 82

2x 6°

0. 32336.HQ

0. 32336.WW

0. 32336.NN

2x 8°

0. 32337.WW

0. 32337.NN

2x11°

0. 32337.HQ 0. 32338.HQ

2x11°

0. 33291.HQ

0. 33291.WW

0. 33291.NN

2x15°

0. 33292.HQ

0. 33292.WW

0. 32338.WW

0. 33292.NN

0. 32338.NN

2x18°

0. 33293.HQ

0. 33293.WW

2x15°

0. 32339.HQ

0. 33293.NN

0. 32339.WW

0. 32339.NN

2x20°

0. 33294.HQ

0. 33294.WW

2x26°

0. 33294.NN

0. 32340.HQ

0. 32340.WW

0. 32340.NN

2x34°

0. 33295.HQ

0. 33295.WW

0. 33295.NN

W. W. Mira

0. 32341.HQ

0. 32341.WW

0. 32341.NN

2x 6°

V. 32336.HQ

V. 32336.WW

V. 32336.NN

2x11°

V. 33291.HQ

V. 33291.WW

V. 33291.NN

2x 8°

V. 32337.HQ

V. 32337.WW

V. 32337.NN

2x15°

V. 33292.HQ

V. 33292.WW

V. 33292.NN

2x11°

V. 32338.HQ

V. 32338.WW

V. 32338.NN

2x18°

V. 33293.HQ

V. 33293.WW

V. 33293.NN

2x15°

V. 32339.HQ

V. 32339.WW

V. 32339.NN

2x20°

V. 33294.HQ

V. 33294.WW

V. 33294.NN

2x26°

V. 32340.HQ

V. 32340.WW

V. 32340.NN

2x34°

V. 33295.HQ

V. 33295.WW

V. 33295.NN

W. W. Mira

V. 32341.HQ

V. 32341.WW

V. 32341.NN

Visit www.reggiani.net/code to access the product datasheet.

261

Varios

PROJECTORS

Adjustable projector

Varios Adjustable projector with IOS optics, LED LUCE and control gear technology

For 3-circuit track with control gear technology arranged vertically 1x14W

204 90 133

214

1x26W

860lm 3000K CRI 90

995lm 3000K CRI 85

1100lm 4000K CRI 85

2070lm 3000K CRI 94

2408lm 3000K CRI 85

2535lm 4000K CRI 84

ø 137

Version: Non-dimmable

Version: Dimmable (1-10V DC)*

Version: DALI dimming *

2x 6°

0. 32370.HQ

0. 32370.WW

0. 32370.NN

0. 33311.HQ

0. 33311.WW

0. 33311.NN

2x 8°

0. 32368.HQ

0. 32368.WW

0. 32368.NN

0. 33312.HQ

0. 33312.WW

0. 33312.NN

2x11°

0. 32371.HQ

0. 32371.WW

0. 32371.NN

0. 33313.HQ

0. 33313.WW

0. 33313.NN

2x15°

0. 32372.HQ

0. 32372.WW

0. 32372.NN

0. 33314.HQ

0. 33314.WW

0. 33314.NN

2x26°

0. 32373.HQ

0. 32373.WW

0. 32373.NN

0. 33315.HQ

0. 33315.WW

0. 33315.NN

W. W. Mira

0. 32374.HQ

0. 32374.WW

0. 32374.NN

0. 33316.HQ

0. 33316.WW

0. 33316.NN

2x 6°

V. 33311.HQ

V. 33311.WW

V. 33311.NN

2x 8°

V. 33312.HQ

V. 33312.WW

V. 33312.NN

2x11°

V. 33313.HQ

V. 33313.WW

V. 33313.NN

2x15°

V. 33314.HQ

V. 33314.WW

V. 33314.NN

2x26°

V. 33315.HQ

V. 33315.WW

V. 33315.NN

W. W. Mira

V. 33316.HQ

V. 33316.WW

V. 33316.NN

2x 6°

D.33311.HQ

D.33311.WW

D.33311.NN

2x 8°

D.33312.HQ

D.33312.WW

D.33312.NN

2x11°

D.33313.HQ

D.33313.WW

D.33313.NN

2x15°

D.33314.HQ

D.33314.WW

D.33314.NN

2x26°

D.33315.HQ

D.33315.WW

D.33315.NN

W. W. Mira

D.33316.HQ

D.33316.WW

D.33316.NN

*Caution: the track-mounted projectors with dimming provision require speciﬁc adapters and tracks

For 3-circuit track with control gear technology arranged vertically 1x14W

204 90 860lm 3000K CRI 90

995lm 3000K CRI 85

1100lm 4000K CRI 85

2070lm 3000K CRI 94

2408lm 3000K CRI 85

2535lm 4000K CRI 84

2x 6°

0. 32440.HQ

0. 32440.WW

0. 32440.NN

0. 33321.HQ

0. 33321.WW

0. 33321.NN

2x 8°

0. 32438.HQ

0. 32438.WW

0. 32438.NN

0. 33322.HQ

0. 33322.WW

0. 33322.NN

2x11°

0. 32441.HQ

0. 32441.WW

0. 32441.NN

0. 33323.HQ

0. 33323.WW

0. 33323.NN

2x15°

0. 32442.HQ

0. 32442.WW

0. 32442.NN

0. 33324.HQ

0. 33324.WW

0. 33324.NN

2x26°

0. 32443.HQ

0. 32443.WW

0. 32443.NN

0. 33325.HQ

0. 33325.WW

0. 33325.NN

W. W. Mira

0. 32444.HQ

0. 32444.WW

0. 32444.NN

0. 33326.HQ

0. 33326.WW

0. 33326.NN

155 133

214

1x26W

ø 137

Version: Non-dimmable

Version: Dimmable (1-10V DC)

Version: DALI dimming

262

2x 6°

V. 33321.HQ

V. 33321.WW

V. 33321.NN

2x 8°

V. 33322.HQ

V. 33322.WW

V. 33322.NN

2x11°

V. 33323.HQ

V. 33323.WW

V. 33323.NN

2x15°

V. 33324.HQ

V. 33324.WW

V. 33324.NN

2x26°

V. 33325.HQ

V. 33325.WW

V. 33325.NN

W. W. Mira

V. 33326.HQ

V. 33326.WW

V. 33326.NN

2x 6°

D.33321.HQ

D.33321.WW

D.33321.NN

2x 8°

D.33322.HQ

D.33322.WW

D.33322.NN

2x11°

D.33323.HQ

D.33323.WW

D.33323.NN

2x15°

D.33324.HQ

D.33324.WW

D.33324.NN

2x26°

D.33325.HQ

D.33325.WW

D.33325.NN

W. W. Mira

D.33326.HQ

D.33326.WW

D.33326.NN

Varios

PROJECTORS

Adjustable projector

7 1x32W

1x39W

2420lm 3000K CRI 94

2817lm 3000K CRI 85

2980lm 4000K CRI 84

2970lm 3000K CRI 97

3955lm 3000K CRI 82

4295lm 4000K CRI 82

2x 6°

0. 33301.HQ

0. 33301.WW

0. 33301.NN

2x 8°

0. 33302.HQ

0. 33302.WW

0. 33302.NN

2x11°

0. 33341.HQ

0. 33341.WW

0. 33341.NN

2x15°

0. 33342.HQ

0. 33342.WW

2x11°

0. 33303.HQ

0. 33303.WW

0. 33342.NN

0. 33303.NN

2x18°

0. 33343.HQ

0. 33343.WW

2x15°

0. 33304.HQ

0. 33343.NN

0. 33304.WW

0. 33304.NN

2x20°

0. 33344.HQ

0. 33344.WW

2x26°

0. 33344.NN

0. 33305.HQ

0. 33305.WW

0. 33305.NN

2x34°

0. 33345.HQ

0. 33345.WW

0. 33345.NN

W. W. Mira

0. 33306.HQ

0. 33306.WW

0. 33306.NN

2x 6°

V. 33301.HQ

V. 33301.WW

V. 33301.NN

2x11°

V. 33341.HQ

V. 33341.WW

V. 33341.NN

2x 8°

V. 33302.HQ

V. 33302.WW

V. 33302.NN

2x15°

V. 33342.HQ

V. 33342.WW

V. 33342.NN

2x11°

V. 33303.HQ

V. 33303.WW

V. 33303.NN

2x18°

V. 33343.HQ

V. 33343.WW

V. 33343.NN

2x15°

V. 33304.HQ

V. 33304.WW

V. 33304.NN

2x20°

V. 33344.HQ

V. 33344.WW

V. 33344.NN

2x26°

V. 33305.HQ

V. 33305.WW

V. 33305.NN

2x34°

V. 33345.HQ

V. 33345.WW

V. 33345.NN

W. W. Mira

V. 33306.HQ

V. 33306.WW

V. 33306.NN

1x32W

1x39W

2420lm 3000K CRI 94

2817lm 3000K CRI 85

2980lm 4000K CRI 84

2970lm 3000K CRI 97

3955lm 3000K CRI 82

4295lm 4000K CRI 82

2x 6°

0. 33331.HQ

0. 33331.WW

0. 33331.NN

2x 8°

0. 33332.HQ

0. 33332.WW

0. 33332.NN

2x11°

0. 33351.HQ

0. 33351.WW

0. 33351.NN

2x15°

0. 33352.HQ

0. 33352.WW

2x11°

0. 33333.HQ

0. 33333.WW

0. 33352.NN

0. 33333.NN

2x18°

0. 33353.HQ

0. 33353.WW

2x15°

0. 33334.HQ

0. 33353.NN

0. 33334.WW

0. 33334.NN

2x20°

0. 33354.HQ

0. 33354.WW

2x26°

0. 33354.NN

0. 33335.HQ

0. 33335.WW

0. 33335.NN

2x34°

0. 33355.HQ

0. 33355.WW

0. 33355.NN

W. W. Mira

0. 33336.HQ

0. 33336.WW

0. 33336.NN

2x 6°

V. 33331.HQ

V. 33331.WW

V. 33331.NN

2x11°

V. 33351.HQ

V. 33351.WW

V. 33351.NN

2x 8°

V. 33332.HQ

V. 33332.WW

V. 33332.NN

2x15°

V. 33352.HQ

V. 33352.WW

V. 33352.NN

2x11°

V. 33333.HQ

V. 33333.WW

V. 33333.NN

2x18°

V. 33353.HQ

V. 33353.WW

V. 33353.NN

2x15°

V. 33334.HQ

V. 33334.WW

V. 33334.NN

2x20°

V. 33354.HQ

V. 33354.WW

V. 33354.NN

2x26°

V. 33335.HQ

V. 33335.WW

V. 33335.NN

2x34°

V. 33355.HQ

V. 33355.WW

V. 33355.NN

W. W. Mira

V. 33336.HQ

V. 33336.WW

V. 33336.NN

Visit www.reggiani.net/code to access the product datasheet.

263

Varios

PROJECTORS

Adjustable projector

Varios with power-driven adjustment Projector with power-driven adjustment, IOS optics, LED LUCE and control gear technology

For 3-circuit track with control gear technology arranged vertically 245

1x14W

1x26W

131 143

221

860lm 3000K CRI 90

995lm 3000K CRI 85

1100lm 4000K CRI 85

2070lm 3000K CRI 94

2408lm 3000K CRI 85

2535lm 4000K CRI 84

ø 137

Version: Non-dimmable

Version: Dimmable (1-10V DC)*

Version: DALI dimming *

2x 6°

0. 32511.HQ

0. 32511.WW

0. 32511.NN

0. 32546.HQ

0. 32546.WW

0. 32546.NN

2x 8°

0. 32509.HQ

0. 32509.WW

0. 32509.NN

0. 32547.HQ

0. 32547.WW

0. 32547.NN

2x11°

0. 32512.HQ

0. 32512.WW

0. 32512.NN

0. 32548.HQ

0. 32548.WW

0. 32548.NN

2x15°

0. 32513.HQ

0. 32513.WW

0. 32513.NN

0. 32549.HQ

0. 32549.WW

0. 32549.NN

2x26°

0. 32514.HQ

0. 32514.WW

0. 32514.NN

0. 32550.HQ

0. 32550.WW

0. 32550.NN

W. W. Mira

0. 32515.HQ

0. 32515.WW

0. 32515.NN

0. 32551.HQ

0. 32551.WW

0. 32551.NN

2x 6°

V. 32546.HQ

V. 32546.WW

V. 32546.NN

2x 8°

V. 32547.HQ

V. 32547.WW

V. 32547.NN

2x11°

V. 32548.HQ

V. 32548.WW

V. 32548.NN

2x15°

V. 32549.HQ

V. 32549.WW

V. 32549.NN

2x26°

V. 32550.HQ

V. 32550.WW

V. 32550.NN

W. W. Mira

V. 32551.HQ

V. 32551.WW

V. 32551.NN

2x 6°

D.32546.HQ

D.32546.WW

D.32546.NN

2x 8°

D.32547.HQ

D.32547.WW

D.32547.NN

2x11°

D.32548.HQ

D.32548.WW

D.32548.NN

2x15°

D.32549.HQ

D.32549.WW

D.32549.NN

2x26°

D.32550.HQ

D.32550.WW

D.32550.NN

W. W. Mira

D.32551.HQ

D.32551.WW

D.32551.NN

*Caution: the track-mounted projectors with dimming provision require speciﬁc adapters and tracks

For 3-circuit track with control gear technology arranged vertically 1x14W

245 131

860lm 3000K CRI 90

995lm 3000K CRI 85

1100lm 4000K CRI 85

2070lm 3000K CRI 94

2408lm 3000K CRI 85

2535lm 4000K CRI 84

2x 6°

0. 32526.HQ

0. 32526.WW

0. 32526.NN

0. 32536.HQ

0. 32536.WW

0. 32536.NN

2x 8°

0. 32524.HQ

0. 32524.WW

0. 32524.NN

0. 32537.HQ

0. 32537.WW

0. 32537.NN

2x11°

0. 32527.HQ

0. 32527.WW

0. 32527.NN

0. 32538.HQ

0. 32538.WW

0. 32538.NN

2x15°

0. 32528.HQ

0. 32528.WW

0. 32528.NN

0. 32539.HQ

0. 32539.WW

0. 32539.NN

2x26°

0. 32529.HQ

0. 32529.WW

0. 32529.NN

0. 32540.HQ

0. 32540.WW

0. 32540.NN

W. W. Mira

0. 32530.HQ

0. 32530.WW

0. 32530.NN

0. 32541.HQ

0. 32541.WW

0. 32541.NN

165

221

1x26W

ø 137

Version: Non-dimmable

Version: Dimmable (1-10V DC)

Version: DALI dimming

264

2x 6°

V. 32536.HQ

V. 32536.WW

V. 32536.NN

2x 8°

V. 32537.HQ

V. 32537.WW

V. 32537.NN

2x11°

V. 32538.HQ

V. 32538.WW

V. 32538.NN

2x15°

V. 32539.HQ

V. 32539.WW

V. 32539.NN

2x26°

V. 32540.HQ

V. 32540.WW

V. 32540.NN

W. W. Mira

V. 32541.HQ

V. 32541.WW

V. 32541.NN

2x 6°

D.32536.HQ

D.32536.WW

D.32536.NN

2x 8°

D.32537.HQ

D.32537.WW

D.32537.NN

2x11°

D.32538.HQ

D.32538.WW

D.32538.NN

2x15°

D.32539.HQ

D.32539.WW

D.32539.NN

2x26°

D.32540.HQ

D.32540.WW

D.32540.NN

W. W. Mira

D.32541.HQ

D.32541.WW

D.32541.NN

Varios

PROJECTORS

Adjustable projector

7 1x32W

1x39W

2420lm 3000K CRI 94

2817lm 3000K CRI 85

2980lm 4000K CRI 84

2970lm 3000K CRI 97

3955lm 3000K CRI 82

4295lm 4000K CRI 82

2x 6°

0. 32582.HQ

0. 32582.WW

0. 32582.NN

2x 8°

0. 32583.HQ

0. 32583.WW

0. 32583.NN

2x11°

0. 32571.HQ

0. 32571.WW

0. 32571.NN

2x15°

0. 32572.HQ

0. 32572.WW

2x11°

0. 32584.HQ

0. 32584.WW

0. 32572.NN

0. 32584.NN

2x18°

0. 32573.HQ

0. 32573.WW

2x15°

0. 32585.HQ

0. 32573.NN

0. 32585.WW

0. 32585.NN

2x20°

0. 32574.HQ

0. 32574.WW

2x26°

0. 32574.NN

0. 32586.HQ

0. 32586.WW

0. 32586.NN

2x34°

0. 32575.HQ

0. 32575.WW

0. 32575.NN

W. W. Mira

0. 32587.HQ

0. 32587.WW

0. 32587.NN

2x 6°

V. 32582.HQ

V. 32582.WW

V. 32582.NN

2x11°

V. 32571.HQ

V. 32571.WW

V. 32571.NN

2x 8°

V. 32583.HQ

V. 32583.WW

V. 32583.NN

2x15°

V. 32572.HQ

V. 32572.WW

V. 32572.NN

2x11°

V. 32584.HQ

V. 32584.WW

V. 32584.NN

2x18°

V. 32573.HQ

V. 32573.WW

V. 32573.NN

2x15°

V. 32585.HQ

V. 32585.WW

V. 32585.NN

2x20°

V. 32574.HQ

V. 32574.WW

V. 32574.NN

2x26°

V. 32586.HQ

V. 32586.WW

V. 32586.NN

2x34°

V. 32575.HQ

V. 32575.WW

V. 32575.NN

W. W. Mira

V. 32587.HQ

V. 32587.WW

V. 32587.NN

1x32W

1x39W

2420lm 3000K CRI 94

2817lm 3000K CRI 85

2980lm 4000K CRI 84

2970lm 3000K CRI 97

3955lm 3000K CRI 82

4295lm 4000K CRI 82

2x 6°

0. 32576.HQ

0. 32576.WW

0. 32576.NN

2x 8°

0. 32577.HQ

0. 32577.WW

0. 32577.NN

2x11°

0. 32561.HQ

0. 32561.WW

0. 32561.NN

2x15°

0. 32562.HQ

0. 32562.WW

2x11°

0. 32578.HQ

0. 32578.WW

0. 32562.NN

0. 32578.NN

2x18°

0. 32563.HQ

0. 32563.WW

2x15°

0. 32579.HQ

0. 32563.NN

0. 32579.WW

0. 32579.NN

2x20°

0. 32564.HQ

0. 32564.WW

2x26°

0. 32564.NN

0. 32580.HQ

0. 32580.WW

0. 32580.NN

2x34°

0. 32565.HQ

0. 32565.WW

0. 32565.NN

W. W. Mira

0. 32581.HQ

0. 32581.WW

0. 32581.NN

2x 6°

V. 32576.HQ

V. 32576.WW

V. 32576.NN

2x11°

V. 32561.HQ

V. 32561.WW

V. 32561.NN

2x 8°

V. 32577.HQ

V. 32577.WW

V. 32577.NN

2x15°

V. 32562.HQ

V. 32562.WW

V. 32562.NN

2x11°

V. 32578.HQ

V. 32578.WW

V. 32578.NN

2x18°

V. 32563.HQ

V. 32563.WW

V. 32563.NN

2x15°

V. 32579.HQ

V. 32579.WW

V. 32579.NN

2x20°

V. 32564.HQ

V. 32564.WW

V. 32564.NN

2x26°

V. 32580.HQ

V. 32580.WW

V. 32580.NN

2x34°

V. 32565.HQ

V. 32565.WW

V. 32565.NN

W. W. Mira

V. 32581.HQ

V. 32581.WW

V. 32581.NN

Visit www.reggiani.net/code to access the product datasheet.

265

Varios

PROJECTORS

Adjustable projector

Varios Adjustable projector with IOS optics and control gear technology for metal halide lamps.

For 3-circuit track CDM-T / G12

183 90 140 ø 95

1x20 Watt

1x35 Watt

1x50 Watt

1x70 Watt

2x 6°/ 7°

0. 19635.00

0. 19640.00

0. 50120.00

0. 19645.00

2x12°/11°/12°

0. 19636.00

0. 19641.00

0. 50121.00

0. 19646.00

2x37°/39°

0. 19637.00

0. 19642.00

0. 50122.00

0. 19647.00

0. 19638.00

0. 19643.00

0. 50123.00

0. 19648.00

W. W. Mira

Surface-mounted version 183 90 140

2x 6°/ 7°

0. 19821.00

0. 19826.00

0. 50124.00

0. 19831.00

2x12°/11°/12°

0. 19822.00

0. 19827.00

0. 50125.00

0. 19832.00

2x37°/39°

0. 19823.00

0. 19828.00

0. 50126.00

0. 19833.00

0. 19824.00

0. 19829.00

0. 50127.00

0. 19834.00

W. W. Mira

ø 95

For 3-circuit track 183 90

2x 6°/ 7°

0. 19510.00

0. 19515.00

0. 50128.00

0. 19520.00

2x12°/11°/12°

0. 19511.00

0. 19516.00

0. 50129.00

0. 19521.00

2x37°/39°

0. 19512.00

0. 19517.00

0. 50130.00

0. 19522.00

0. 19513.00

0. 19518.00

0. 50131.00

0. 19523.00

133

200

W. W. Mira

ø 95

Surface-mounted version 183 90 155 133

200

2x 6°/ 7°

0. 19802.00

0. 19807.00

0. 50132.00

0. 19812.00

2x12°/11°/12°

0. 19803.00

0. 19808.00

0. 50133.00

0. 19813.00

2x37°/39°

0. 19804.00

0. 19809.00

0. 50134.00

0. 19814.00

0. 19805.00

0. 19810.00

0. 50135.00

0. 19815.00

W. W. Mira

ø 95

For 3-circuit track (power-driven adjustment) 224 131 143

210

2x 6°/ 7°

0. 20110.00

0. 20116.00

0. 50136.00

0. 20122.00

2x12°/11°/12°

0. 20111.00

0. 20117.00

0. 50137.00

0. 20123.00

2x37°/39°

0. 20112.00

0. 20118.00

0. 50138.00

0. 20124.00

0. 20113.00

0. 20119.00

0. 50139.00

0. 20125.00

W. W. Mira

ø 95

Surface-mounted version (power-driven adjustment)

224 131 165

210

2x 6°/ 7°

0. 20180.00

0. 20186.00

0. 50140.00

0. 20192.00

2x12°/11°/12°

0. 20181.00

0. 20187.00

0. 50141.00

0. 20193.00

2x37°/39°

0. 20182.00

0. 20188.00

0. 50142.00

0. 20194.00

0. 20183.00

0. 20189.00

0. 50143.00

0. 20195.00

W. W. Mira

ø 95

266

Varios

PROJECTORS

Adjustable projector

Varios Adjustable projector with IOS optics and control gear technology for metal halide lamps and halogen lamps.

For 3-circuit track CDM-T / G12

204

QT-14 / G9

90 160 ø 137

1x20 Watt

1x35 Watt

1x50 Watt

1x70 Watt

1x60 Watt

2x 7° / 8°

0. 19650.00

0. 19655.00

0. 50144.00

0. 19660.00

0. 19665.00

2x11°

0. 19651.00

0. 19656.00

0. 50145.00

0. 19661.00

0. 19666.00

2x14°

0. 19544.00

0. 19545.00

0. 50146.00

0. 19546.00

0. 19547.00

2x25°

0. 19652.00

0. 19657.00

0. 50147.00

0. 19662.00

0. 19667.00

W. W. Mira

0. 19653.00

0. 19658.00

0. 50148.00

0. 19663.00

0. 19668.00

2x 7° / 8°

0. 19876.00

0. 19881.00

0. 50149.00

0. 19886.00

0. 20001.00

2x11°

0. 19877.00

0. 19882.00

0. 50150.00

0. 19887.00

0. 20002.00

2x14°

0. 19890.00

0. 19891.00

0. 50151.00

0. 19892.00

0. 20005.00

2x25°

0. 19878.00

0. 19883.00

0. 50152.00

0. 19888.00

0. 20003.00

W. W. Mira

0. 19879.00

0. 19884.00

0. 50153.00

0. 19889.00

0. 20004.00

2x 7° / 8°

0. 19550.00

0. 19555.00

0. 50154.00

0. 19560.00

0. 19565.00

2x11°

0. 19551.00

0. 19556.00

0. 50155.00

0. 19561.00

0. 19566.00

2x14°

0. 19540.00

0. 19541.00

0. 50156.00

0. 19542.00

0. 19543.00

2x25°

0. 19552.00

0. 19557.00

0. 50157.00

0. 19562.00

0. 19567.00

W. W. Mira

0. 19553.00

0. 19558.00

0. 50158.00

0. 19563.00

0. 19568.00

2x 7° / 8°

0. 19856.00

0. 19861.00

0. 50159.00

0. 19866.00

0. 19996.00

2x11°

0. 19857.00

0. 19862.00

0. 50160.00

0. 19867.00

0. 19997.00

2x14°

0. 19870.00

0. 19871.00

0. 50161.00

0. 19872.00

0. 19994.00

2x25°

0. 19858.00

0. 19863.00

0. 50162.00

0. 19868.00

0. 19998.00

W. W. Mira

0. 19859.00

0. 19864.00

0. 50163.00

0. 19869.00

0. 19999.00

Surface-mounted version 204 90 160 ø 137

For 3-circuit track 204 90 133

204 ø 137

Surface-mounted version 204 90 155 133

214 ø 137

Visit www.reggiani.net/code to access the product datasheet.

267

Varios

PROJECTORS

Adjustable projector

Varios with power-driven adjustment Adjustable projector with IOS optics and control gear technology for metal halide lamps and halogen lamps.

For 3-circuit track 245

CDM-T / G12

QT-14 / G9

131 143

221

1x20 Watt

1x35 Watt

1x50 Watt

1x70 Watt

1x60 Watt

2x 7° / 8°

0. 20140.00

0. 20146.00

0. 50164.00

0. 20152.00

0. 20160.00

2x11°

0. 20141.00

0. 20147.00

0. 50165.00

0. 20153.00

0. 20161.00

2x14°

0. 20144.00

0. 20150.00

0. 50166.00

0. 20156.00

0. 20164.00

2x25°

0. 20142.00

0. 20148.00

0. 50167.00

0. 20154.00

0. 20162.00

W. W. Mira

0. 20143.00

0. 20149.00

0. 50168.00

0. 20155.00

0. 20163.00

2x 7° / 8°

0. 20220.00

0. 20226.00

0. 50169.00

0. 20232.00

0. 20250.00

2x11°

0. 20221.00

0. 20227.00

0. 50170.00

0. 20233.00

0. 20251.00

2x14°

0. 20224.00

0. 20230.00

0. 50171.00

0. 20236.00

0. 20254.00

2x25°

0. 20222.00

0. 20228.00

0. 50172.00

0. 20234.00

0. 20252.00

W. W. Mira

0. 20223.00

0. 20229.00

0. 50173.00

0. 20235.00

0. 20253.00

ø 137

Surface-mounted version 245 131 165

221 ø 137

268

Varios

PROJECTORS

Adjustable projector

Varios Adjustable projector with control gear technology for low voltage halogen lamps

For 3-circuit track QR-111 / G53

204 90 160

1x65 Watt - 12V

ø 137

of the lamp

0. 19670.00

of the lamp

0. 20016.00

of the lamp

0. 19570.00

of the lamp

0. 20010.00

of the lamp

0. 20168.00

Surface-mounted version

204 90 160 ø 137

For 3-circuit track 204 90 133

204 ø 137

Surface-mounted version 204 90 155 133

214 ø 137

For 3-circuit track (power-driven adjustment) 245

131 143

221 ø 137

Surface-mounted version (power-driven adjustment) of the lamp

245 131

0. 20258.00

165

221 ø 137

Visit www.reggiani.net/code to access the product datasheet.

269

Trisio Plus / Trisio

PROJECTORS

Adjustable projectors

Design: Fabio NomeReggiani Cognome

Trisio Plus / Trisio Minimal, compact design combined with high efﬁciency light sources – these are the innovative features in this new version of Trisio Plus, interior adjustable projector, which comes in three versions: pendant, surface mounted and track mounted. The optical compartment can be adjusted to the desired position using the friction joint that can also be ﬁxed in place with the screw

lock. A streamlined rigid aluminium rod is used in the pendant version, showing up its already eye-catching design.

Wallis, One New Change - London, Great Britain 270

PROJECTORS

Trisio Plus / Trisio Adjustable projectors

Diesel - Washington, USA

271

Trisio Plus / Trisio

PROJECTORS

Adjustable projectors STANDARD FINISHES 10 white 21 black 28 metallised grey BODY Two harmonious elements in die-cast aluminium, held together by a joint that enables utmost adjustment of the luminaire, house the control gear and the optical compartment, which is fitted with a passive heat sink that exploits the thermal conductivity of the aluminium and the convection current generated by virtue of the temperature difference in the air around the heat sink, ensuring perfectly efficient and long-lasting light sources. OPTICS IOS system (Interchangeable Optical System) Instant interchangeability, a full range of beams and high efficiency (up to d 90) INSTALLATION OF TRACK-MOUNTED PROJECTORS Projectors complete with adapter for mounting on Reggiani 3-circuit track. (The compatibility of the adapter with the various 3-circuit tracks available on the market will require prior verification). INSTALLATION OF SURFACE-MOUNTED PROJECTORS

Possibility of power supply cable access from the side in surface-mounted projectors.

Built-in anti-glare shield for utmost visual comfort.

90° ADJUSTMENT 90° in the vertical axis. Adjustment with friction device and screw lock.

356° 356° in the horizontal axis

272

Trisio Plus / Trisio

PROJECTORS

Adjustable projectors

Trisio Plus Trisio RE LED LUCE incorporates the best high efﬁciency LEDs (up to 4295 lm, 108 lm/W) with varying tones of excellent white (3000K - 4000K, CRI from 84 to 94). Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous ﬂux).

For IOS versions with metal halide lamps. For IOS versions with halogen lamps.

For versions with low voltage halogen lamp with built-in reﬂector.

Optics

99.99% pure aluminium IOS reflector with Ø 80 / 130 mm, twistlock fixing system and tempered safety glass (clear for narrow beams, microsphere for medium and wide beams, prismatic for the Wall Washer Mira version). There are also versions with gold optics, selective filters for lighting foodstuffs or coloured dichroic filters.

Lamps with built-in reﬂector.

Control gear technologies

Electronic transformer for low voltage halogen lamps in a unit that is thermally independent from the optical compartment.

The Re Led Luce system includes drivers with diversiﬁed dimming features, to meet the widest design demands. For Re Led Luce 14W

• Non-dimmable driver (120 or 240V AC/ DC).

For Re Led Luce 26W

• Non-dimmable driver (108-264V AC/ DC). • Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%. • Driver (198-265V) with DALI dimming protocol to dim luminaires separately or together (luminous intensity adjustment from 100% to 5%) and to digitally switch them on/off. Stand-by mode (consumption 0.3W).

273

Trisio Plus / Trisio

PROJECTORS

Adjustable projectors

Trisio Plus Adjustable projector with IOS optics, LED LUCE and control gear technology

For 3-circuit track 1x14W

145x85

860lm 3000K CRI 90

215

995lm 3000K CRI 85

1x26W 1100lm 4000K CRI 85

2070lm 3000K CRI 94

2408lm 3000K CRI 85

2535lm 4000K CRI 84

ø100

Version: Non-dimmable

Version: Dimmable (1-10V DC)*

Version: DALI dimming *

2x 6°

0. 32861.HQ

0. 32861.WW

0. 32861.NN

0. 32901.HQ

0. 32901.WW

0. 32901.NN

2x 8°

0. 32862.HQ

0. 32862.WW

0. 32862.NN

0. 32902.HQ

0. 32902.WW

0. 32902.NN

2x11°

0. 32863.HQ

0. 32863.WW

0. 32863.NN

0. 32903.HQ

0. 32903.WW

0. 32903.NN

2x15°

0. 32864.HQ

0. 32864.WW

0. 32864.NN

0. 32904.HQ

0. 32904.WW

0. 32904.NN

2x26°

0. 32865.HQ

0. 32865.WW

0. 32865.NN

0. 32905.HQ

0. 32905.WW

0. 32905.NN

W. W. Mira

0. 32866.HQ

0. 32866.WW

0. 32866.NN

0. 32906.HQ

0. 32906.WW

0. 32906.NN

2x 6°

V. 32901.HQ

V. 32901.WW

V. 32901.NN

2x 8°

V. 32902.HQ

V. 32902.WW

V. 32902.NN V. 32903.NN

2x11°

V. 32903.HQ

V. 32903.WW

2x15°

V. 32904.HQ

V. 32904.WW

V. 32904.NN

2x26°

V. 32905.HQ

V. 32905.WW

V. 32905.NN

W. W. Mira

V. 32906.HQ

V. 32906.WW

V. 32906.NN

2x 6°

D.32901.HQ

D.32901.WW

D.32901.NN

2x 8°

D.32902.HQ

D.32902.WW

D.32902.NN

2x11°

D.32903.HQ

D.32903.WW

D.32903.NN

2x15°

D.32904.HQ

D.32904.WW

D.32904.NN

2x26°

D.32905.HQ

D.32905.WW

D.32905.NN

W. W. Mira

D.32906.HQ

D.32906.WW

D.32906.NN

Pendant mounted on 3-circuit track 145x85

1000

Version: Non-dimmable

Version: Dimmable (1-10V DC)*

Version: DALI dimming *

ø100 2x 6°

0. 32871.HQ

0. 32871.WW

0. 32871.NN

0. 32911.HQ

0. 32911.WW

0. 32911.NN

2x 8°

0. 32872.HQ

0. 32872.WW

0. 32872.NN

0. 32912.HQ

0. 32912.WW

0. 32912.NN

2x11°

0. 32873.HQ

0. 32873.WW

0. 32873.NN

0. 32913.HQ

0. 32913.WW

0. 32913.NN

2x15°

0. 32874.HQ

0. 32874.WW

0. 32874.NN

0. 32914.HQ

0. 32914.WW

0. 32914.NN

2x26°

0. 32875.HQ

0. 32875.WW

0. 32875.NN

0. 32915.HQ

0. 32915.WW

0. 32915.NN

W. W. Mira

0. 32876.HQ

0. 32876.WW

0. 32876.NN

0. 32916.HQ

0. 32916.WW

0. 32916.NN

2x 6°

V. 32911.HQ

V. 32911.WW

V. 32911.NN

2x 8°

V. 32912.HQ

V. 32912.WW

V. 32912.NN

2x11°

V. 32913.HQ

V. 32913.WW

V. 32913.NN

2x15°

V. 32914.HQ

V. 32914.WW

V. 32914.NN

2x26°

V. 32915.HQ

V. 32915.WW

V. 32915.NN

W. W. Mira

V. 32916.HQ

V. 32916.WW

V. 32916.NN D.32911.NN

2x 6°

D.32911.HQ

D.32911.WW

2x 8°

D.32912.HQ

D.32912.WW

D.32912.NN

2x11°

D.32913.HQ

D.32913.WW

D.32913.NN

2x15°

D.32914.HQ

D.32914.WW

D.32914.NN

2x26°

D.32915.HQ

D.32915.WW

D.32915.NN

W. W. Mira

D.32916.HQ

D.32916.WW

D.32916.NN

*Caution: the track-mounted projectors with dimming provision require speciﬁc adapters and tracks

274

Trisio Plus / Trisio

PROJECTORS

Adjustable projectors

Trisio Plus Adjustable projector with IOS optics, LED LUCE and control gear technology

Surface mounted ø 156

1x14W 860lm 3000K CRI 90

211

Version: Non-dimmable

Version: Dimmable (1-10V DC)*

Version: DALI dimming *

ø100

1x26W

995lm 3000K CRI 85

1100lm 4000K CRI 85

2070lm 3000K CRI 94

2408lm 3000K CRI 85

2535lm 4000K CRI 84

2x 6°

0. 32851.HQ

0. 32851.WW

0. 32851.NN

0. 32891.HQ

0. 32891.WW

0. 32891.NN

2x 8°

0. 32852.HQ

0. 32852.WW

0. 32852.NN

0. 32892.HQ

0. 32892.WW

0. 32892.NN

2x11°

0. 32853.HQ

0. 32853.WW

0. 32853.NN

0. 32893.HQ

0. 32893.WW

0. 32893.NN

2x15°

0. 32854.HQ

0. 32854.WW

0. 32854.NN

0. 32894.HQ

0. 32894.WW

0. 32894.NN

2x26°

0. 32855.HQ

0. 32855.WW

0. 32855.NN

0. 32895.HQ

0. 32895.WW

0. 32895.NN

W. W. Mira

0. 32856.HQ

0. 32856.WW

0. 32856.NN

0. 32896.HQ

0. 32896.WW

0. 32896.NN

2x 6°

V. 32891.HQ

V. 32891.WW

V. 32891.NN

2x 8°

V. 32892.HQ

V. 32892.WW

V. 32892.NN

2x11°

V. 32893.HQ

V. 32893.WW

V. 32893.NN

2x15°

V. 32894.HQ

V. 32894.WW

V. 32894.NN

2x26°

V. 32895.HQ

V. 32895.WW

V. 32895.NN

W. W. Mira

V. 32896.HQ

V. 32896.WW

V. 32896.NN

2x 6°

D.32891.HQ

D.32891.WW

D.32891.NN

2x 8°

D.32892.HQ

D.32892.WW

D.32892.NN

2x11°

D.32893.HQ

D.32893.WW

D.32893.NN

2x15°

D.32894.HQ

D.32894.WW

D.32894.NN

2x26°

D.32895.HQ

D.32895.WW

D.32895.NN

W. W. Mira

D.32896.HQ

D.32896.WW

D.32896.NN

Visit www.reggiani.net/code to access the product datasheet.

275

Trisio Plus / Trisio

PROJECTORS

Adjustable projectors

Trisio Adjustable projector for low voltage and mains voltage halogen lamps

For 3-circuit track 145 x 85

145 x 85

QR-CB / GU5.3 HIT-SPOT / GZ10

QR-111 / G53

57 227

171

213

167

ø 68

1x50 Watt of the lamp

ø 121

1x50 Watt

1x65 Watt

0. 13000.00

of the lamp

0. 13034.00

of the lamp

0. 13028.00

of the lamp

0. 13054.00

0. 13002.00

Pendant mounted on 3-circuit track 145 x 85

of the lamp

145 x 85

0. 13004.00

of the lamp

0. 13006.00

948

1019

ø 68

ø 121

Surface mounted ø 156

of the lamp 55

0. 13010.00

of the lamp

ø 156 0. 13012.00 213

227 ø 121

ø 68

Surface-mounted pendant ø 156

of the lamp 55

of the lamp

0. 13020.00 0. 13022.00

1019

ø 68

276

Trisio Plus / Trisio

PROJECTORS

Adjustable projectors

Trisio Adjustable projector with IOS optics and control gear technology for metal halide lamps and low voltage halogen lamps

For 3-circuit track 145 x 85

CDM-TC / G8.5

QT-12 / GY6.35

57 240

189 ø 95

1x20 Watt

1x35 Watt

1x50 Watt

1x70 Watt

2x 7° /8°

0. 13035.00

0. 13038.00

0. 50196.00

0. 13041.00

2x17°

0. 13036.00

0. 13039.00

0. 50197.00

0. 13042.00

2x28°/29°

0. 13037.00

0. 13040.00

0. 50198.00

0. 13043.00

1x50 Watt

2x 9°

0. 13014.00

2x12°

0. 13015.00

2x15°

0. 13016.00

Pendant mounted on 3-circuit track 145 x 85

2x 7° /8°

0. 13045.00

0. 13048.00

0. 50199.00

0. 13051.00

2x17°

0. 13046.00

0. 13049.00

0. 50200.00

0. 13052.00

2x28°/29°

0. 13047.00

0. 13050.00

0. 50201.00

0. 13053.00

2x 7° /8°

0. 13055.00

0. 13058.00

0. 50202.00

0. 13061.00

2x17°

0. 13056.00

0. 13059.00

0. 50203.00

0. 13062.00

2x28°/29°

0. 13057.00

0. 13060.00

0. 50204.00

0. 13063.00

1031

ø 95

Surface mounted ø 182

240 ø 95

2x 9°

0. 13024.00

2x12°

0. 13025.00

2x15°

0. 13026.00

Surface-mounted pendant ø 182 57

2x 7° /8°

0. 13075.00

0. 13078.00

0. 50205.00

0. 13081.00

2x17°

0. 13076.00

0. 13079.00

0. 50206.00

0. 13082.00

2x28°/29°

0. 13077.00

0. 13080.00

0. 50207.00

0. 13083.00

1031

ø 95

Visit www.reggiani.net/code to access the product datasheet.

277

Trisio Plus / Trisio

PROJECTORS

Adjustable projectors

Trisio Adjustable projector with IOS optics and control gear technology for metal halide lamps

For 3-circuit track 145 x 85

CDM-T / G12

320

284 ø 144

1x20 Watt

1x35 Watt

1x50 Watt

1x70 Watt

1x100 Watt

1x150 Watt

2x 7°

0. 13112.00

0. 13103.00

0. 50208.00

0. 13106.00

0. 50212.00

0. 13109.00

2x11°

0. 13113.00

0. 13104.00

0. 50209.00

0. 13107.00

0. 50213.00

0. 13110.00

2x14°

0. 13139.00

0. 13119.00

0. 50210.00

0. 13137.00

0. 50214.00

0. 13138.00

2x25°

0. 13114.00

0. 13105.00

0. 50211.00

0. 13108.00

0. 50215.00

0. 13111.00

Surface mounted ø 182 57 320

2x 7°

0. 13116.00

0. 13123.00

0. 50216.00

0. 13126.00

2x11°

0. 13117.00

0. 13124.00

0. 50217.00

0. 13127.00

2x14°

0. 13140.00

0. 13142.00

0. 50218.00

0. 13143.00

2x25°

0. 13118.00

0. 13125.00

0. 50219.00

0. 13128.00

ø 144

278

Visit www.reggiani.net/code to access the product datasheet.

PROJECTORS

Trisio Plus / Trisio Adjustable projectors

AURA

279

Bink

PROJECTORS

Adjustable projector

Design: Promoluce Fabio Reggiani

Bink Restrained and essential, the Bink projector effectively demonstrates the Reggiani commitment to miniaturise luminaires so they ﬁt in with the architecture. The optical compartment is a cylinder that sits horizontally on a slim, rectangular extended platform where the control gear is housed. It also functions efﬁciently because it is split into two separate units for heat dissipation. 280

The front of the cylinder ends with a retaining ring that holds the safety glass or Fresnel lens; the back slants at a 45° angle and has ventilation slots to dissipate the heat emitted by the lamp. This unique shape reduces the length of the bracket as much as possible, making the luminaire very easy to handle. In Bink, light beam and luminaire blend to become almost one, and its

aerodynamic, light design means it ﬁts well into any setting.

PROJECTORS

Bink Adjustable projector

La Triennale mostra marco Ferreri

281

Bink

PROJECTORS

Adjustable projector STANDARD FINISHES 10 white 21 black 28 metallised grey BODY Die-cast aluminium; structure with separate compartments. The optical compartment is ﬁtted with a passive heat sink that exploits the thermal conductivity of the aluminium and the convection current generated by virtue of the temperature difference in the air around the heat sink, ensuring perfectly efﬁcient and long-lasting light sources.

The 45° slant at the back reduces the length of the bracket

OPTICS IOS system (Interchangeable Optical System) for RE LED LUCE. Instant interchangeability, a full range of beams and high efﬁciency (up to d 90).

Heat treated clear safety glass. Fresnel lens for a clear deﬁnition of the object to illuminate

INSTALLATION OF TRACK-MOUNTED PROJECTORS Projectors complete with adapter for mounting on Reggiani 3-circuit track. (The compatibility of the adapter with the various 3-circuit tracks available on the market will require prior veriﬁcation). INSTALLATION OF SURFACE-MOUNTED PROJECTORS Die-cast aluminium connecting module for ceiling mounting.

Structure with separate compartments for optimum heat dissipation

TRACK MOUNTED

ADJUSTMENT 356° in the horizontal axis

90° in the vertical axis

282

SURFACE MOUNTED

Bink

PROJECTORS

Adjustable projector

Bink RE LED LUCE incorporates the best high efﬁciency LEDs (up to 1100 lm, 80 lm/W) with varying tones of excellent white (3000K - 4000K, CRI from 85 to 90). Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous ﬂux).

For versions with metal halide lamps.

For metal halide lamps: high-efficient 99.9% pure aluminium parabolic reflector for excellent control of glare and of the light beam emitted. Lampholder with twist-lock fixing system.

HF control gear for metal halide lamps with ceramic technology.

For versions with low voltage halogen lamp with built-in reﬂector.

Track-mounted projectors

Surface-mounted projectors

Optics

Control gear technologies

Toroidal or electronic transformer.

The Re Led Luce system includes drivers with diversiﬁed dimming features, to meet the widest design demands.

For Re Led Luce 14W

• Non-dimmable driver (120 or 240V AC/DC).

283

Bink

PROJECTORS

Adjustable projector

Bink Adjustable projector with IOS optics, LED LUCE and control gear technology

For 3-circuit track 1x14W

Version: Non-dimmable

860lm 3000K CRI 90

995lm 3000K CRI 85

1100lm 4000K CRI 85

2x 6°

0. 32620.HQ

0. 32620.WW

0. 32620.NN

2x 8°

0. 32618.HQ

0. 32618.WW

0. 32618.NN

2x11°

0. 32621.HQ

0. 32621.WW

0. 32621.NN

2x15°

0. 32622.HQ

0. 32622.WW

0. 32622.NN

2x26°

0. 32623.HQ

0. 32623.WW

0. 32623.NN

W. W. Mira

0. 32624.HQ

0. 32624.WW

0. 32624.NN

2x 6°

0. 32640.HQ

0. 32640.WW

0. 32640.NN

2x 8°

0. 32638.HQ

0. 32638.WW

0. 32638.NN

2x11°

0. 32641.HQ

0. 32641.WW

0. 32641.NN

2x15°

0. 32642.HQ

0. 32642.WW

0. 32642.NN

2x26°

0. 32643.HQ

0. 32643.WW

0. 32643.NN

W. W. Mira

0. 32644.HQ

0. 32644.WW

0. 32644.NN

Surface mounted ø90 33 215

Version: Non-dimmable

284

Bink

PROJECTORS

Adjustable projector

Bink Adjustable projector with control gear technology for metal halide lamps and low voltage halogen lamps

For 3-circuit track CDM-TC / G8.5

QR-CB / GU5.3

1x35 Watt

1x50 Watt

1x70 Watt

1x100 Watt

2x11°

0. 02796.00

0. 50270.00

0. 02798.00

0. 50272.00

2x31°

0. 02797.00

0. 50271.00

0. 02799.00

0. 50273.00

1x20/35/50 Watt-12V

of the lamp

0. 02762.EV

Surface mounted ø90 33 215

2x11°

0. 02792.00

0. 50274.00

0. 02794.00

0. 50276.00

2x31°

0. 02793.00

0. 50275.00

0. 02795.00

0. 50277.00

of the lamp

0. 02759.EV

For 3-circuit track CDM-TC / G8.5

1x35 Watt 1x50 Watt

1x70 Watt

2x 6°

0. 02777.00 0. 50278.00 0. 02781.00

2x21°

0. 02778.00 0. 50279.00 0. 02782.00

CDM-T / G12

QR-111 / G53

1x35 Watt 1x50 Watt 1x70 Watt 1x100 Watt 1x150 Watt

1x65 Watt-12V

2x 9°/10°/ 8°

0. 02765.EV 0. 50280.00 0. 02769.EV 0. 50282.00 0. 02773.EV

2x26°/27°/28°

0. 02766.EV 0. 50281.00 0. 02770.EV 0. 50283.00 0. 02774.EV

of the lamp

0. 02785.EV

Surface mounted 2x 6°

0. 02779.00 0. 50284.00 0. 02783.00

2x21°

0. 02780.00 0. 50285.00 0. 02784.00

2x 9°/10°/ 8°

0. 02767.EV 0. 50286.00 0. 02771.EV 0. 50288.00 0. 02775.EV

2x26°/27°/28°

0. 02768.EV 0. 50287.00 0. 02772.EV 0. 50289.00 0. 02776.EV

of the lamp

Visit www.reggiani.net/code to access the product datasheet.

0. 02786.EV

285

ZeroZeroUno

PROJECTORS

Adjustable projector

Design: Nome Cognome

ZeroZeroUno The fascinating ZeroZeroUno, with its TV studio look and barn doors can be used to control and mix single light beams to show up colours, shapes and volumes. Its extraordinary light beam, free from irregular ﬂuxes can be adjusted as desired and magnify the clarity of the setting, just like on a ﬁlm set. The optical compartment and the control gear technologies of ZeroZeroUno are separated for optimum heat 286

dissipation. ZeroZeroUno comes in track mounted and surface mounted versions. ZeroZeroUno is designed for use with metal halide and halogen lamps and the smaller versions are ﬁtted with a Fresnel lens with concentric or ﬂat parallel prisms, while the larger model has a lens system to focus the light beam, a framing projector to obtain square or round light beams.

PROJECTORS

ZeroZeroUno Adjustable projector

287

ZeroZeroUno

PROJECTORS

Adjustable projector STANDARD FINISHES 10 white 21 black 28 metallised grey BODY Die-cast aluminium; structure with separate compartments for optimum heat dissipation. OPTICS WITH FRESNEL LENSES Application of the Fresnel lens makes it possible to obtain very strong, even and above all clear light beams, which eliminate blurred and foggy effects. In the version with concentric prisms (for symmetric light distribution) the light beam is simply projected, while the one with parallel prisms (for asymmetric light distribution) can light up walls and backdrops. This provides a high degree of control of the light beam and therefore complete mastery of how the various lighting layouts are developed.

Mounting bracket

Handles to adjust the projector

INSTALLATION OF TRACK-MOUNTED PROJECTORS Projectors complete with adapter for mounting on Reggiani 3-circuit track. (The compatibility of the adapter with the various 3-circuit tracks available on the market will require prior veriﬁcation). INSTALLATION OF SURFACE-MOUNTED PROJECTORS DEGREE OF PROTECTION IP20/40 BARN DOORS 4 barn-doors for light beam control included in the packaging.

Compartment containing the control gear technologies

4 barn-doors for light beam control included in the packaging.

ADJUSTMENT 356° in the horizontal axis

90° in the vertical axis

288

ZeroZeroUno

PROJECTORS

Adjustable projector

ZeroZeroUno Small

ZeroZeroUno RE LED LUCE incorporates the best high efﬁciency LEDs (up to 4295 lm, 108 lm/W) with varying tones of excellent white (3000K - 4000K, CRI from 84 to 94). Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous ﬂux).

For versions with metal halide lamps and low voltage halogen lamps.

For versions with metal halide lamps and control gear technology.

For 3-circuit track

Surface-mounted version

Optics

Control gear technologies

IOS reflectors with Ø 80 mm (LL2 and LL7) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization - exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%). The shield is clear for very narrow beams, satin for narrow, medium and wide beams and satin/prismatic for the Wall Washer Mira version. There are also versions with gold optics or with selective filters for lighting foodstuffs.

99.9% pure aluminium reﬂector.

HF control gear for metal halide lamps with ceramic technology.

The Re Led Luce system includes drivers with diversiﬁed dimming features, to meet the widest design demands. For Re Led Luce 14W

• Non-dimmable driver (120 or 240V AC/DC).

For Re Led Luce 26W

• Non-dimmable driver (108-264V AC/DC). • Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%.

For Re Led Luce 32W

• Non-dimmable driver (108-264V AC/DC). • Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%.

For Re Led Luce 39W

• Non-dimmable driver (108-264V AC/DC). • Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%.

Toroidal transformer for halogen lamps.

289

ZeroZeroUno

PROJECTORS

Adjustable projector

ZeroZeroUno Small Adjustable projector with IOS optics, LED LUCE and control gear technology

For 3-circuit track 1x14W

1x26W

225 235 225

860lm 3000K CRI 90

995lm 3000K CRI 85

1100lm 4000K CRI 85

2070lm 3000K CRI 94

2408lm 3000K CRI 85

2535lm 4000K CRI 84

105 101

Version: Non-dimmable

Version: Dimmable (1-10V DC)*

2x 6°

0. 39901.HQ

0. 39901.WW

0. 39901.NN

0. 39911.HQ

0. 39911.WW

0. 39911.NN

2x 8°

0. 39902.HQ

0. 39902.WW

0. 39902.NN

0. 39912.HQ

0. 39912.WW

0. 39912.NN

2x11°

0. 39903.HQ

0. 39903.WW

0. 39903.NN

0. 39913.HQ

0. 39913.WW

0. 39913.NN

2x15°

0. 39904.HQ

0. 39904.WW

0. 39904.NN

0. 39914.HQ

0. 39914.WW

0. 39914.NN

2x26°

0. 39905.HQ

0. 39905.WW

0. 39905.NN

0. 39915.HQ

0. 39915.WW

0. 39915.NN

W. W. Mira

0. 39906.HQ

0. 39906.WW

0. 39906.NN

0. 39916.HQ

0. 39916.WW

0. 39916.NN

2x 6°

V. 39911.HQ

V. 39911.WW

V. 39911.NN

2x 8°

V. 39912.HQ

V. 39912.WW

V. 39912.NN

2x11°

V. 39913.HQ

V. 39913.WW

V. 39913.NN

2x15°

V. 39914.HQ

V. 39914.WW

V. 39914.NN

2x26°

V. 39915.HQ

V. 39915.WW

V. 39915.NN

W. W. Mira

V. 39916.HQ

V. 39916.WW

V. 39916.NN

ZeroZeroUno Adjustable projector with IOS optics, LED LUCE and control gear technology

Surface-mounted version ø 66

1x14W

225

1x26W

860lm 3000K CRI 90

995lm 3000K CRI 85

1100lm 4000K CRI 85

2070lm 3000K CRI 94

2408lm 3000K CRI 85

2535lm 4000K CRI 84

2x 6°

0. 39951.HQ

0. 39951.WW

0. 39951.NN

0. 39961.HQ

0. 39961.WW

0. 39961.NN

2x 8°

0. 39952.HQ

0. 39952.WW

0. 39952.NN

0. 39962.HQ

0. 39962.WW

0. 39962.NN

2x11°

0. 39953.HQ

0. 39953.WW

0. 39953.NN

0. 39963.HQ

0. 39963.WW

0. 39963.NN

2x15°

0. 39954.HQ

0. 39954.WW

0. 39954.NN

0. 39964.HQ

0. 39964.WW

0. 39964.NN

2x26°

0. 39955.HQ

0. 39955.WW

0. 39955.NN

0. 39965.HQ

0. 39965.WW

0. 39965.NN

W. W. Mira

0. 39956.HQ

0. 39956.WW

0. 39956.NN

0. 39966.HQ

0. 39966.WW

0. 39966.NN

235 225 105 101

Version: Non-dimmable

Version: Dimmable (1-10V DC)*

2x 6°

V. 39961.HQ

V. 39961.WW

V. 39961.NN

2x 8°

V. 39962.HQ

V. 39962.WW

V. 39962.NN

2x11°

V. 39963.HQ

V. 39963.WW

V. 39963.NN

2x15°

V. 39964.HQ

V. 39964.WW

V. 39964.NN

2x26°

V. 39965.HQ

V. 39965.WW

V. 39965.NN

W. W. Mira

V. 39966.HQ

V. 39966.WW

V. 39966.NN

*Caution: the track-mounted projectors with dimming provision require speciﬁc adapters and tracks.

290

ZeroZeroUno

PROJECTORS

Adjustable projector

7 1x32W

1x39W

2420lm 3000K CRI 94

2817lm 3000K CRI 85

2980lm 4000K CRI 84

2970lm 3000K CRI 97

3955lm 3000K CRI 82

4295lm 4000K CRI 82

2x 6°

0. 39931.HQ

0. 39931.WW

0. 39931.NN

2x 8°

0. 39932.HQ

0. 39932.WW

0. 39932.NN

2x11°

0. 39921.HQ

0. 39921.WW

0. 39921.NN

2x15°

0. 39922.HQ

0. 39922.WW

2x11°

0. 39933.HQ

0. 39933.WW

0. 39922.NN

0. 39933.NN

2x18°

0. 39923.HQ

0. 39923.WW

2x15°

0. 39934.HQ

0. 39923.NN

0. 39934.WW

0. 39934.NN

2x20°

0. 39924.HQ

0. 39924.WW

2x26°

0. 39924.NN

0. 39935.HQ

0. 39935.WW

0. 39935.NN

2x34°

0. 39925.HQ

0. 39925.WW

0. 39925.NN

W. W. Mira

0. 39936.HQ

0. 39936.WW

0. 39936.NN

2x 6°

V. 39931.HQ

V. 39931.WW

V. 39931.NN

2x11°

V. 39921.HQ

V. 39921.WW

V. 39921.NN

2x 8°

V. 39932.HQ

V. 39932.WW

V. 39932.NN

2x15°

V. 39922.HQ

V. 39922.WW

V. 39922.NN

2x11°

V. 39933.HQ

V. 39933.WW

V. 39933.NN

2x18°

V. 39923.HQ

V. 39923.WW

V. 39923.NN

2x15°

V. 39934.HQ

V. 39934.WW

V. 39934.NN

2x20°

V. 39924.HQ

V. 39924.WW

V. 39924.NN

2x26°

V. 39935.HQ

V. 39935.WW

V. 39935.NN

2x34°

V. 39925.HQ

V. 39925.WW

V. 39925.NN

W. W. Mira

V. 39936.HQ

V. 39936.WW

V. 39936.NN

7 1x32W

1x39W

2420lm 3000K CRI 94

2817lm 3000K CRI 85

2980lm 4000K CRI 84

2970lm 3000K CRI 97

3955lm 3000K CRI 82

4295lm 4000K CRI 82

2x 6°

0. 39981.HQ

0. 39981.WW

0. 39981.NN

2x 8°

0. 39982.HQ

0. 39982.WW

0. 39982.NN

2x11°

0. 39971.HQ

0. 39971.WW

0. 39971.NN

2x15°

0. 39972.HQ

0. 39972.WW

2x11°

0. 39983.HQ

0. 39983.WW

0. 39972.NN

0. 39983.NN

2x18°

0. 39973.HQ

0. 39973.WW

2x15°

0. 39984.HQ

0. 39973.NN

0. 39984.WW

0. 39984.NN

2x20°

0. 39974.HQ

0. 39974.WW

2x26°

0. 39974.NN

0. 39985.HQ

0. 39985.WW

0. 39985.NN

2x34°

0. 39975.HQ

0. 39975.WW

0. 39975.NN

W. W. Mira

0. 39986.HQ

0. 39986.WW

0. 39986.NN

2x 6°

V. 39981.HQ

V. 39981.WW

V. 39981.NN

2x11°

V. 39971.HQ

V. 39971.WW

V. 39971.NN

2x 8°

V. 39982.HQ

V. 39982.WW

V. 39982.NN

2x15°

V. 39972.HQ

V. 39972.WW

V. 39972.NN

2x11°

V. 39983.HQ

V. 39983.WW

V. 39983.NN

2x18°

V. 39973.HQ

V. 39973.WW

V. 39973.NN

2x15°

V. 39984.HQ

V. 39984.WW

V. 39984.NN

2x20°

V. 39974.HQ

V. 39974.WW

V. 39974.NN

2x26°

V. 39985.HQ

V. 39985.WW

V. 39985.NN

2x34°

V. 39975.HQ

V. 39975.WW

V. 39975.NN

W. W. Mira

V. 39986.HQ

V. 39986.WW

V. 39986.NN

Visit www.reggiani.net/code to access the product datasheet.

291

ZeroZeroUno

PROJECTORS

Adjustable projector

ZeroZeroUno Small Adjustable projector with control gear technology for metal halide lamps and low voltage halogen lamps

For 3-circuit track CDM-TC / G8.5 225

QR-CB / GU5.3 225

235 225

220

1x35 Watt

105 101

2x11°

0. 02741.00

2x31°

0. 02742.00

2x11°

0. 02739.00

2x31°

0. 02740.00

225

Surface-mounted version

1x20/35/50 Watt - 12V

105 101

of the lamp

0. 02726.EV

of the lamp

0. 02728.EV

ø 66

ø 66 225

225 220

235

225

105 101

ZeroZeroUno Adjustable projector with control gear technology for metal halide lamps Adjustable symmetric beam

For 3-circuit track

CDM-T / G12

QT-DE / R7s

350 74,9

265 1x70 Watt

1x100 Watt

0. 02826.EV

0. 50114.EV

1x150 Watt

1x120 Watt

350 160 178

2x17°- 2x32° 2x18°- 2x35°

0. 02827.EV

2x15°- 2x35°

0. 02818.00

Adjustable asymmetric beam

a = 7° / 10°

0. 02822.EV

0. 50115.EV

a = 8° / 11°

0. 02823.EV

Adjustable symmetric beam

Surface-mounted version 145 350 265 90 350 160 178

2x17°- 2x32°

0. 02846.EV

0. 50116.EV

2x18°- 2x35°

0. 02847.EV

2x15°- 2x35°

0. 02824.00

Adjustable asymmetric beam

a = 7° / 10° a = 8° / 11° 292

0. 02844.EV

0. 50117.EV 0. 02845.EV

ZeroZeroUno

PROJECTORS

Adjustable projector

ZeroZeroUno Adjustable projector with framing projectors and control gear technology for metal halide lamps

Adjustable symmetric beam

For 3-circuit track 145

CDM-T / G12

330 380 1x70 Watt 330

160

2x10째- 2x35째

0. 02828.EV

2x10째- 2x35째

0. 02848.EV

178 Surface-mounted version 145 350 380 90 330

160

178

ZeroZeroUno Adjustable projector with framing projectors and control gear technology for metal halide lamps For 3-circuit track CDM-T / G12 330 430 1x70 Watt

1x100 Watt

1x150 Watt

0. 02862.EV

0. 50118.EV

0. 02863.EV

0. 02864.EV

0. 50119.EV

0. 02865.EV

Surface-mounted version 145 350 430

Visit www.reggiani.net/code to access the product datasheet.

293

Unisio

PROJECTORS

Fixed projector

Design: Fabio NomeReggiani Cognome

Unisio Unisio is a ďŹ xed projector with a truncated cone body â&#x20AC;&#x201C; perfect for accent lighting when there is no false ceiling for recessing. The optical compartment and the control gear are thermally independent, for optimum reliability and performance. Unisio comes in two sizes as pendant, surfacemounted and track-mounted luminaire.

294

PROJECTORS

Unisio Fixed projector

295

Unisio

PROJECTORS

Fixed projector STANDARD FINISHES 10 white 21 black 28 metallised grey BODY Die-cast aluminium; structure with separate compartments. The upper part houses the control gear, while the optical compartment is fitted with a passive heat sink, guaranteeing perfect efficiency. OPTICS IOS system (Interchangeable Optical System) Instant interchangeability, a full range of beams and high efficiency (up to d 90). ANTI-GLARE SHIELD Die-cast aluminium, integrated into the luminaire body.

Built-in anti-glare shield for excellent visual comfort

Unisio RE LED LUCE incorporates the best high efﬁciency LEDs (up to 4295 lm, 108 lm/W) with varying tones of excellent white (3000K - 4000K, CRI from 84 to 94). Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous ﬂux).

Optics

Control gear technologies

For Re Led Luce 10W

296

IOS reflectors with Ø 50 mm (LL1) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization - exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%).

High efﬁciency driver 85% and a power factor of nearly 1 assure real energy savings. The robustness of the control gear is assured up to Ta 70°C and Tc 90°C and guarantees a lifetime of over 50,000 h. The Re Led Luce system includes drivers with diversiﬁed dimming features, to meet the widest design demands. • Non-dimmable driver (220/240V).

For Re Led Luce 14W

• Non-dimmable driver (120 or 240V AC/DC). • Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%. • Driver (198-265V) with DALI dimming protocol to dim luminaires separately or together (luminous intensity adjustment from 100% to 5%) and to digitally switch them on/off. Stand-by mode (consumption 0.3W).

For Re Led Luce 26W

• Non-dimmable driver (108-264V AC/DC). • Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10% • Driver (198-265V) with DALI dimming protocol to dim luminaires separately or together (luminous intensity adjustment from 100% to 5%) and to digitally switch them on/off. Stand-by mode (consumption 0.3W).

Unisio

PROJECTORS

Fixed projector

Unisio Fixed projector with IOS optics, LED LUCE and control gear technology

For 3-circuit track 1x10W 735lm 3000K CRI 90

185 ø 91

980lm 3000K CRI 83

1000lm 4000K CRI 83

LED+Driver 15,6W

Version: Non-dimmable

2x 7°

0. 33070.HQ

0. 33070.WW

0. 33070.NN

2x15°

0. 33071.HQ

0. 33071.WW

0. 33071.NN

2x24°

0. 33072.HQ

0. 33072.WW

0. 33072.NN

2x 7°

0. 33010.HQ

0. 33010.WW

0. 33010.NN

2x15°

0. 33011.HQ

0. 33011.WW

0. 33011.NN

2x24°

0. 33012.HQ

0. 33012.WW

0. 33012.NN

2x 7°

0. 33100.HQ

0. 33100.WW

0. 33100.NN

2x15°

0. 33101.HQ

0. 33101.WW

0. 33101.NN

2x24°

0. 33102.HQ

0. 33102.WW

0. 33102.NN

Surface mounted ø 123 185

ø 91

Version: Non-dimmable

Surface-mounted pendant

ø 123 60

1185

Version: Non-dimmable

ø 91

Visit www.reggiani.net/code to access the product datasheet.

297

Unisio

PROJECTORS

Fixed projector

Unisio Fixed projector with IOS optics, LED LUCE and control gear technology

For 3-circuit track 1x14W 860lm 3000K CRI 90

207

ø 119

Version: Non-dimmable

Version: Dimmable (1-10V DC)*

Version: DALI dimming*

995lm 3000K CRI 85

1x26W 1100lm 4000K CRI 85

2070lm 3000K CRI 94

LED+Driver 15,6W

2408lm 3000K CRI 85

2535lm 4000K CRI 84

LED+Driver 27,7W

2x 6°

0. 33190.HQ

0. 33190.WW

0. 33190.NN

0. 33241.HQ

0. 33241.WW

0. 33241.NN

2x 8°

0. 33189.HQ

0. 33189.WW

0. 33189.NN

0. 33242.HQ

0. 33242.WW

0. 33242.NN

2x11°

0. 33191.HQ

0. 33191.WW

0. 33191.NN

0. 33243.HQ

0. 33243.WW

0. 33243.NN

2x15°

0. 33192.HQ

0. 33192.WW

0. 33192.NN

0. 33244.HQ

0. 33244.WW

0. 33244.NN

2x26°

0. 33193.HQ

0. 33193.WW

0. 33193.NN

0. 33245.HQ

0. 33245.WW

0. 33245.NN

W. W. Mira

0. 33194.HQ

0. 33194.WW

0. 33194.NN

0. 33246.HQ

0. 33246.WW

0. 33246.NN

2x 6°

V. 33190.HQ

V. 33190.WW

V. 33190.NN

V. 33241.HQ

V. 33241.WW

V. 33241.NN

2x 8°

V. 33189.HQ

V. 33189.WW

V. 33189.NN

V. 33242.HQ

V. 33242.WW

V. 33242.NN

2x11°

V. 33191.HQ

V. 33191.WW

V. 33191.NN

V. 33243.HQ

V. 33243.WW

V. 33243.NN

2x15°

V. 33192.HQ

V. 33192.WW

V. 33192.NN

V. 33244.HQ

V. 33244.WW

V. 33244.NN

2x26°

V. 33193.HQ

V. 33193.WW

V. 33193.NN

V. 33245.HQ

V. 33245.WW

V. 33245.NN

W. W. Mira

V. 33194.HQ

V. 33194.WW

V. 33194.NN

V. 33246.HQ

V. 33246.WW

V. 33246.NN

2x 6°

D.33190.HQ

D.33190.WW

D.33190.NN

D.33241.HQ

D.33241.WW

D.33241.NN

2x 8°

D.33189.HQ

D.33189.WW

D.33189.NN

D.33242.HQ

D.33242.WW

D.33242.NN D.33243.NN

2x11°

D.33191.HQ

D.33191.WW

D.33191.NN

D.33243.HQ

D.33243.WW

2x15°

D.33192.HQ

D.33192.WW

D.33192.NN

D.33244.HQ

D.33244.WW

D.33244.NN

2x26°

D.33193.HQ

D.33193.WW

D.33193.NN

D.33245.HQ

D.33245.WW

D.33245.NN

W. W. Mira

D.33194.HQ

D.33194.WW

D.33194.NN

D.33246.HQ

D.33246.WW

D.33246.NN

*Caution: the track-mounted projectors with dimming provision require speciﬁc adapters and tracks

Surface-mounted pendant ø 155 207 ø 119

Version: Non-dimmable

Version: Dimmable (1-10V DC)

Version: DALI dimming

298

2x 6°

0. 33130.HQ

0. 33130.WW

0. 33130.NN

0. 33271.HQ

0. 33271.WW

0. 33271.NN

2x 8°

0. 33129.HQ

0. 33129.WW

0. 33129.NN

0. 33272.HQ

0. 33272.WW

0. 33272.NN

2x11°

0. 33131.HQ

0. 33131.WW

0. 33131.NN

0. 33273.HQ

0. 33273.WW

0. 33273.NN

2x15°

0. 33132.HQ

0. 33132.WW

0. 33132.NN

0. 33274.HQ

0. 33274.WW

0. 33274.NN

2x26°

0. 33133.HQ

0. 33133.WW

0. 33133.NN

0. 33275.HQ

0. 33275.WW

0. 33275.NN

W. W. Mira

0. 33134.HQ

0. 33134.WW

0. 33134.NN

0. 33276.HQ

0. 33276.WW

0. 33276.NN

2x 6°

V. 33130.HQ

V. 33130.WW

V. 33130.NN

V. 33271.HQ

V. 33271.WW

V. 33271.NN

2x 8°

V. 33129.HQ

V. 33129.WW

V. 33129.NN

V. 33272.HQ

V. 33272.WW

V. 33272.NN V. 33273.NN

2x11°

V. 33131.HQ

V. 33131.WW

V. 33131.NN

V. 33273.HQ

V. 33273.WW

2x15°

V. 33132.HQ

V. 33132.WW

V. 33132.NN

V. 33274.HQ

V. 33274.WW

V. 33274.NN

2x26°

V. 33133.HQ

V. 33133.WW

V. 33133.NN

V. 33275.HQ

V. 33275.WW

V. 33275.NN

W. W. Mira

V. 33134.HQ

V. 33134.WW

V. 33134.NN

V. 33276.HQ

V. 33276.WW

V. 33276.NN

2x 6°

D.33130.HQ

D.33130.WW

D.33130.NN

D.33271.HQ

D.33271.WW

D.33271.NN

2x 8°

D.33129.HQ

D.33129.WW

D.33129.NN

D.33272.HQ

D.33272.WW

D.33272.NN D.33273.NN

2x11°

D.33131.HQ

D.33131.WW

D.33131.NN

D.33273.HQ

D.33273.WW

2x15°

D.33132.HQ

D.33132.WW

D.33132.NN

D.33274.HQ

D.33274.WW

D.33274.NN

2x26°

D.33133.HQ

D.33133.WW

D.33133.NN

D.33275.HQ

D.33275.WW

D.33275.NN

W. W. Mira

D.33134.HQ

D.33134.WW

D.33134.NN

D.33276.HQ

D.33276.WW

D.33276.NN

Unisio

PROJECTORS

Fixed projector

Unisio Fixed projector with IOS optics, LED LUCE and control gear technology

Surface-mounted pendant 1x14W

1x26W

ø 155 70

860lm 3000K CRI 90

995lm 3000K CRI 85

1100lm 4000K CRI 85

2070lm 3000K CRI 94

2408lm 3000K CRI 85

2535lm 4000K CRI 84

1207

ø 119

Version: Non-dimmable

Version: Dimmable (1-10V DC)

Version: DALI dimming

2x 6°

0. 33220.HQ

0. 33220.WW

0. 33220.NN

0. 33371.HQ

0. 33371.WW

0. 33371.NN

2x 8°

0. 33219.HQ

0. 33219.WW

0. 33219.NN

0. 33372.HQ

0. 33372.WW

0. 33372.NN

2x11°

0. 33221.HQ

0. 33221.WW

0. 33221.NN

0. 33373.HQ

0. 33373.WW

0. 33373.NN

2x15°

0. 33222.HQ

0. 33222.WW

0. 33222.NN

0. 33374.HQ

0. 33374.WW

0. 33374.NN

2x26°

0. 33223.HQ

0. 33223.WW

0. 33223.NN

0. 33375.HQ

0. 33375.WW

0. 33375.NN

W. W. Mira

0. 33224.HQ

0. 33224.WW

0. 33224.NN

0. 33376.HQ

0. 33376.WW

0. 33376.NN

2x 6°

V. 33220.HQ

V. 33220.WW

V. 33220.NN

V. 33371.HQ

V. 33371.WW

V. 33371.NN

2x 8°

V. 33219.HQ

V. 33219.WW

V. 33219.NN

V. 33372.HQ

V. 33372.WW

V. 33372.NN

2x11°

V. 33221.HQ

V. 33221.WW

V. 33221.NN

V. 33373.HQ

V. 33373.WW

V. 33373.NN

2x15°

V. 33222.HQ

V. 33222.WW

V. 33222.NN

V. 33374.HQ

V. 33374.WW

V. 33374.NN

2x26°

V. 33223.HQ

V. 33223.WW

V. 33223.NN

V. 33375.HQ

V. 33375.WW

V. 33375.NN

W. W. Mira

V. 33224.HQ

V. 33224.WW

V. 33224.NN

V. 33376.HQ

V. 33376.WW

V. 33376.NN

2x 6°

D.33220.HQ

D.33220.WW

D.33220.NN

D.33371.HQ

D.33371.WW

D.33371.NN

2x 8°

D.33219.HQ

D.33219.WW

D.33219.NN

D.33372.HQ

D.33372.WW

D.33372.NN

2x11°

D.33221.HQ

D.33221.WW

D.33221.NN

D.33373.HQ

D.33373.WW

D.33373.NN

2x15°

D.33222.HQ

D.33222.WW

D.33222.NN

D.33374.HQ

D.33374.WW

D.33374.NN

2x26°

D.33223.HQ

D.33223.WW

D.33223.NN

D.33375.HQ

D.33375.WW

D.33375.NN

W. W. Mira

D.33224.HQ

D.33224.WW

D.33224.NN

D.33376.HQ

D.33376.WW

D.33376.NN

Visit www.reggiani.net/code to access the product datasheet.

299

Quadriplus

PROJECTORS

Adjustable projector

Design: Fabio Reggiani

Quadriplus Quadriplus is an adjustable projector with interchangeable LED LUCE Comfort optics. The excellent quality and efďŹ ciency of LED LUCE LL4 and the ďŹ&#x201A;exibility of the lighting design brought about by the interchangeable optics make this luminaire suitable for general or accent lighting also in large spaces.

300

PROJECTORS

Quadriplus Adjustable projector

301

Quadriplus

PROJECTORS

Adjustable projector STANDARD FINISHES 10 white 21 black 28 metallised grey BODY Die-cast aluminium; it houses the control gear and the optical compartment, which is ﬁtted with a passive heat sink that exploits the thermal conductivity of the aluminium and the convection current generated by virtue of the temperature difference in the air around the heat sink, ensuring perfectly efﬁcient and longlasting light sources.

Cooling ﬁns for optimum heat dissipation

INSTALLATION OF TRACK-MOUNTED PROJECTORS Projectors complete with adapter for mounting on Reggiani 3-circuit track. (The compatibility of the adapter with the various 3-circuit tracks available on the market will require prior veriﬁcation). INSTALLATION OF SURFACE-MOUNTED PROJECTORS Using accessory code 0.02289.0010/21/28 DEGREE OF PROTECTION IP20/40

Integral shield that maintains good light emission to produce a uniform light beam

90° ADJUSTMENT 90°

in the vertical axis

356° 356° in the horizontal axis

Quadriplus RE LED LUCE incorporates the best high efﬁciency LEDs (up to 4400 lm, 80 lm/W) with varying tones of excellent white (3000K 4000K, CRI from 85 to 90). Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous ﬂux). Optics

Control gear technologies

Four IOS reflectors with Ø 80 mm (LL4) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%). The shield is satin for narrow, medium and wide beams; satin with clear glass lenses for the Wall Washer Mira version. There are also versions with gold optics. High efficiency driver 85% and a power factor of nearly 1 assure real energy savings. The robustness of the control gear is assured up to Ta 70°C and Tc 90°C and guarantees a lifetime of over 50,000 h. The Re Led Luce system includes drivers with diversified dimming features, to meet the widest design demands.

For Re Led Luce 4x14W

Emergency lighting

302

• Non-dimmable driver (120 or 240V AC/DC). • Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%. The RE LED Luce versions 4x14W are set up for connection to the emergency pack. Code 0.35087.0000 for 14W.

Quadriplus

PROJECTORS

Adjustable projector

Quadriplus Adjustable projector with four IOS optics, LED LUCE and control gear technology

For 3-circuit track 4x14W 220 ø191 397

Version: Non-dimmable

Version: Dimmable (1-10V DC)*

3440lm 3000K CRI 90

3980lm 3000K CRI 85

4400lm 4000K CRI 85

2x 6°

0. 36131.HQ

0. 36131.WW

0. 36131.NN

2x 8°

0. 36132.HQ

0. 36132.WW

0. 36132.NN 0. 36133.NN

2x11°

0. 36133.HQ

0. 36133.WW

2x15°

0. 36134.HQ

0. 36134.WW

0. 36134.NN

2x26°

0. 36135.HQ

0. 36135.WW

0. 36135.NN

W. W. Mira

0. 36136.HQ

0. 36136.WW

0. 36136.NN V. 36131.NN

2x 6°

V. 36131.HQ

V. 36131.WW

2x 8°

V. 36132.HQ

V. 36132.WW

V. 36132.NN

2x11°

V. 36133.HQ

V. 36133.WW

V. 36133.NN

2x15°

V. 36134.HQ

V. 36134.WW

V. 36134.NN

2x26°

V. 36135.HQ

V. 36135.WW

V. 36135.NN

W. W. Mira

V. 36136.HQ

V. 36136.WW

V. 36136.NN

*Caution: the track-mounted projectors with dimming provision require speciﬁc adapters and tracks

Visit www.reggiani.net/code to access the product datasheet.

303

Ambar

PROJECTORS

Adjustable projector

Design: Rogers StirkDesign: Harbour Fabio + Partners Reggiani

Ambar Ambar is a highly versatile pendant or track mounted projector; it is the latest result of the fertile partnership between Reggiani and Rogers Stirk Harbour + Partners. A modern, transparent design reveals the technical complexity of the control gear, fully detached from the aluminium body that houses an optical compartment

304

integrating the IOS system. The technical and functional details become decorative, like the red silicone rubber adjustment knob, inspiring the imagination and facilitating use. Ambar comes in two sizes and as track-mounted luminaire, track-mounted and surface-mounted pendant; it is perfect for accent lighting and

incorporates the considerable advantages of the IOS system in a beautiful, eye-catching object.

PROJECTORS

Ambar Adjustable projector

Pompidou Centre - Paris, France

305

Ambar

PROJECTORS

Adjustable projector STANDARD FINISH 28 metallised grey BODY Die-cast aluminium, with adjustment knob coated with red silicone rubber and component box made from clear polycarbonate. OPTICS IOS system (Interchangeable Optical System) Instant interchangeability, a full range of beams and high efficiency (up to d 90) INSTALLATION OF TRACK-MOUNTED PROJECTORS Projectors complete with adapter for mounting on Reggiani 3-circuit track. (The compatibility of the adapter with the various 3-circuit tracks available on the market will require prior verification). INSTALLATION OF SURFACE-MOUNTED PROJECTORS Die-cast aluminium connecting module for ceiling mounting. BALANCING Pendants with ø 80 mm are fitted with a colour scale for perfect balancing. ANTI-GLARE LOUVRE Luminaires with ø 80 mm have the anti-glare louvre included in the packaging. ADJUSTMENT 90° in the vertical axis 356° in the horizontal axis

Built-in anti-glare shield for utmost visual comfort

Connecting module for ceiling mounting

306

Colour scale for luminaire balancing

Anti-glare louvre

Ambar

PROJECTORS

Adjustable projector

Ambar For IOS versions with metal halide lamps.

Optics

Control gear technologies

307

Ambar

PROJECTORS

Adjustable projector

Ambar Adjustable projector with IOS optics and control gear technology for metal halide lamps.

For 3-circuit track CDM-TC / G8.5 130x85

265

215 ø100 1x20 Watt

1x35 Watt

1x50 Watt

1x70 Watt

2x 7° / 8°

0. 20545.00

0. 20550.00

0. 50174.00

0. 20555.00

2x17°

0. 20546.00

0. 20551.00

0. 50175.00

0. 20556.00

2x28°/29°

0. 20547.00

0. 20552.00

0. 50176.00

0. 20557.00

Pendant mounted on 3-circuit track 2x 7° / 8°

0. 20585.00

0. 20590.00

0. 50177.00

0. 20595.00

2x17°

0. 20586.00

0. 20591.00

0. 50178.00

0. 20596.00

2x28°/29°

0. 20587.00

0. 20592.00

0. 50179.00

0. 20597.00

3000

250

ø100

Surface-mounted pendant 2x 7° / 8°

0. 20495.00

0. 20500.00

0. 50180.00

0. 20505.00

2x17°

0. 20496.00

0. 20501.00

0. 50181.00

0. 20506.00

2x28°/29°

0. 20497.00

0. 20502.00

0. 50182.00

0. 20507.00

3000

250

ø100

308

Ambar

PROJECTORS

Adjustable projector

Ambar Adjustable projector with IOS optics and control gear technology for metal halide lamps.

For 3-circuit track CDM-T / G12 130x85

235

285

ø140

1x20 Watt

1x35 Watt

1x50 Watt

1x70 Watt

2x 7°

0. 20720.00

0. 20725.00

0. 50184.00

0. 20730.00

2x11°

0. 20721.00

0. 20726.00

0. 50185.00

0. 20731.00

2x14°

0. 20723.00

0. 20728.00

0. 50186.00

0. 20733.00

2x25°

0. 20722.00

0. 20727.00

0. 50187.00

0. 20732.00

2x 7°

0. 20740.00

0. 20745.00

0. 50188.00

0. 20750.00

2x11°

0. 20741.00

0. 20746.00

0. 50189.00

0. 20751.00

2x14°

0. 20743.00

0. 20748.00

0. 50190.00

0. 20753.00

2x25°

0. 20742.00

0. 20747.00

0. 50191.00

0. 20752.00

2x 7°

0. 20700.00

0. 20705.00

0. 50192.00

0. 20710.00

2x11°

0. 20701.00

0. 20706.00

0. 50193.00

0. 20711.00

2x14°

0. 20703.00

0. 20708.00

0. 50194.00

0. 20713.00

2x25°

0. 20702.00

0. 20707.00

0. 50195.00

0. 20712.00

Pendant mounted on 3-circuit track

3000

320

ø140

Surface-mounted pendant

3000

320

ø140

Visit www.reggiani.net/code to access the product datasheet.

309

Sunny Light / Bijou / Low Voltage Adjustable projector

The Low Voltage series includes an extensive variety of adjustable, surface or track mounted projectors which are excellent for accent lighting; their materials and design are different but they are united by the use of halogen lamps with dichroic reflector. The compact size, fine materials make them extremely suitable for stylish, defined lighting

310

PROJECTORS

Sunny Light / Bijou / Low Voltage Adjustable projector

Arturo Calle - Colombia

Rostov Hotel - Rostov, Russia

311

Sunny Light / Bijou

PROJECTORS

Adjustable projector

Sunny Light Adjustable projector for low voltage halogen lamps with built-in transformer

For 3-circuit track

Surface mounted QR-CB

QR-CB 192

192 ø 82

ø 82

GU5.3

0. 02812.EV

1x20/35/50 W

GU5.3

0. 05590.EV

1x20/35/50 W

Bijou Adjustable solid brass projector for low voltage halogen lamps

Adjustable solid brass projector for low voltage halogen lamps

QR-CB 95

QR-CB

115

53 ø 40

ø 55 GU4

0. 02021.00

senza adattatore

1x20/35 W

GU5.3 0. 02022.00

senza adattatore

1x20/35/50 W

Adjustable solid brass projector for low voltage halogen lamps

Surface mounted

Surface mounted QR-CB

max 130

QR-CB max 155

ø50

ø 55

GU4 0. 02010.00

ø90

ø 40

1x20/35 W

0. 02013.00

GU5.3 1x20/35/50 W

Adjustable projector for low voltage halogen lamps with built-in transformer

Surface mounted

Surface mounted QR-CB

max 145

QR-CB max 165

ø90

100 x 100

ø 40

ø 55

GU4 0. 02018.EV

312

1x20/35 W

0. 02019.EV

GU5.3 1x20/35/50 W

Low voltage

PROJECTORS

Adjustable projector

Low voltage

Adjustable projector for low voltage halogen lamps

Surface mounted

Track mounted QR-CB

QR-CB

Ă¸50

120

60 GU4 0. 03744.00

1x20/35 W

Adjustable projector for low voltage halogen lamps

GU5.3 0. 03735.00

1x20/35/50 W

Adjustable projector for low voltage halogen lamps with built-in transformer

Surface mounted

Surface mounted QR-CB

QR-CB

60 x 60

100 x 100

GU5.3 0. 03743.00

Visit www.reggiani.net/code to access the product datasheet.

1x20/35/50 W

max 165

GU5.3 0. 03762.EV

1x20/35/50 W

313

Cyl light

PROJECTORS

Fixed projector

Design: Fabio Reggiani

Cyl light Cyl light is a surface mounted ďŹ xed projector for lighting spaces without false ceilings. Its neutral and meticulously clean lines make it compatible with any architectural style. The body, with built-in control gear, consists of a cylinder in varying dimensions depending on the light sources used. Cyl Light also comes in the pendant version and exterior 314

version with a high degree of protection (IP67).

PROJECTORS

Cyl light Fixed projector

Sports Centre Tellene - Rome, Italy

315

Cyl light

PROJECTORS

Fixed projector

Cyl light Fixed COMPACT projector with control gear technology for compact ﬂuorescent lamps

TC-D / G24d-1

TC-D / G24d-2

TC-D / G24d-3

2x13 Watt

2x18 Watt

2x26 Watt

135 ø 244

2x38°

0. 07610.EV

2x45°

0. 07611.EV

2x47°

0. 07612.EV

Cyl light Fixed COMFORT projector with control gear technology for compact ﬂuorescent lamps

TC-D / G24d-2

TC-D / G24d-3

2x18 Watt

2x26 Watt

0. 07630.EV

0. 07631.EV

202 ø 244

2x47°

Cyl light Fixed projector with control gear technology for doubleended metal halide lamps

HIT-DE / RX7s 230 ø 244

2x36°

1x70 Watt

1x150 Watt

0. 07665.EV

0. 07666.EV

Cyl light Fixed projector with control gear technology for doubleended metal halide lamps

HIT-DE / RX7s

HIT-DE / FC2

285 ø 260

1x70 Watt 2x41° 2x44° 2x46°

316

1x150 Watt

1x250 Watt

0. 07870.EV 0. 07871.EV 0. 07692.EV The technology used in LEDs is progressing so rapidly that their efﬁciency is constantly improving. The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated speciﬁcaations.

Cyl light

PROJECTORS

Fixed projector

Cyl light Fixed projector with control gear technology for compact ﬂuorescent lamps

With anti-glare turbo louvre TC-D / G24d-3

TC-DE / G24q-3

TC-D / G24d-3

TC-DE / G24q-3

2x26 Watt

HPF

2x62°

0. 07652.EV

0. 07672.00

2x47°

0. 07654.EV

0. 07687.00

2x42°

0. 07658.EV

2x42°

0. 07694.EV

215 ø 260

Version: for permanent illumination when used as emergency lighting TC-D / G24d-3 + TC-DE / G24q-3 Version: for permanent illumination when used as emergency lighting

2x42°

0. 07678.00

2x42°

0. 07668.00

Cyl light Fixed projector with control gear technology for compact ﬂuorescent lamps

With anti-glare turbo louvre TC-TE / GX24q-3 TC-TE / GX24q-4

TC-TE / GX24q-3 TC-TE / GX24q-4

285 ø 260

2x56°

2x32 Watt

2x42 Watt

2x32 Watt

2x42 Watt

HPF

0. 07815.EV

2x60° Version: for permanent illumination when used as emergency lighting

2x42° 2x42°

Visit www.reggiani.net/code to access the product datasheet.

2x51° 0. 07820.00

2x52°

0. 07821.00

2x52°

0. 07816.EV

2x51°

0. 07825.EV 0. 07830.00 0. 07826.EV 0. 07831.00

317

Narancia

PROJECTORS

Fixed / adjustable projector

Design: Fabio Reggiani

Narancia Narancia is a wall mounted projector with direct/indirect light distribution that can elegantly assert itself in both classic architecture and modern settings. Harmonious shapes with a strong personality, excellent control of the indirect asymmetric light and ďŹ&#x201A;exibility of the direct

318

light brought about by the interchangeable optics, the excellent quality and efďŹ ciency of LED LUCE and the dimming simplicity of the light beam guarantee a wide range of light settings.

PROJECTORS

Narancia Fixed / adjustable projector

Sodersjukhuset Hospital 319

Narancia

PROJECTORS

Fixed / adjustable projector STANDARD FINISHES 10 white 21 black 28 metallised grey BODY Die-cast aluminium; structure with separate compartments for optimum heat dissipation. It is fitted with a die-cast aluminium passive heat sink that exploits the thermal conductivity of the aluminium and the convection current generated by virtue of the temperature difference in the air around the heat sink, ensuring perfectly efficient and longlasting light sources. SHIELD Extra-light, tempered safety glass; resistant to temperature and mechanical shock. INSTALLATION Rapid installation by means of mechanical/electrical bracket without opening the spotlight. Snap-fit terminal. Narancia has provision for double switch (indirect light only, direct light only or both). Possibility of inverted mounting (higher downward flux). REFLECTOR Anti-static metallised polycarbonate with scratch resistant protective coating; LL6 optics for asymmetric light distribution (upwards) and LL2 interchangeable optics for direct light (downwards). INSTALLATION POSITION 0°, traditional mounting - Suitable for every situation that calls for soft indirect lighting obtained when it reflects off the walls. 180°, inverted mounting (where specified) - Recommended in any situation that requires “prominent” lighting in places where it is not possible to install light points in the ceiling. ADJUSTMENT In the versions for metal halide lamps and compact fluorescent lamps, the optical compartment (IP55) is adjustable to three positions (0°, 20°, 40°) with provision for locking the luminaire in the desired position.

0°

180° Possibility of inverted mounting (higher downward ﬂux)

320

Built-in dimmer for luminous intensity adjustment of each single luminaire

Narancia

PROJECTORS

Fixed / adjustable projector

Narancia RE LED LUCE incorporates the best high efﬁciency LEDs (up to 4295 lm, 108 lm/W) with varying tones of excellent white (3000K - 4000K, CRI from 84 to 94). Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous ﬂux).

Versions for metal halide lamps, halogen lamps and compact ﬂuorescent lamps

LL6 optics for asymmetric light distribution made from anti-static metallised polycarbonate with scratch resistant protective coating. IOS reflectors with Ø 80 mm (LL2) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization - exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%). The shield is clear for very narrow beams, satin for narrow, medium and wide beams and satin/prismatic for the Wall Washer Mira version. There are also versions with gold optics or with selective filters for lighting foodstuffs.

99.9% pure aluminium reﬂector with asymmetric light distribution and heat treated clear safety glass.

Control gear technologies

HF control gear for metal halide lamps with ceramic technology. HPF or HF control gear for compact ﬂuorescent lamps. Mains voltage for halogen lamps.

FOR RE LED LUCE

• Driver (120 or 240V AC/DC) with standard dimmer: Triac leading edge phase cut dimmer for incandescent lamps or electronic trailing edge phase cut dimmer for low voltage halogen lamps, for luminous intensity adjustment from 100% to 30%.

Dimmer

With built-in dimmer for luminous intensity adjustment of each single luminaire.

Optics

Emergency lighting

HPF or HF control gear for metal halide lamps with ceramic technology. HPF or HF control gear for compact ﬂuorescent lamps. Mains voltage for halogen lamps.

Versions for metal halide lamp with stand-by halogen lamp (1x100W). Versions with compact ﬂuorescent lamps for permanent illumination when used as emergency lighting.

321

Narancia

PROJECTORS

Fixed / adjustable projector

Narancia Fixed wall mounted projector with direct/indirect light distribution, IOS optics, LED LUCE and control gear technology

6 3x14W

207 2x14W

1x14W

Version: Phase cut dimming

Asymmetric indirect

Version: With built-in dimmer for luminous intensity adjustment of each single luminaire

Asymmetric indirect

132

260

2x860lm 1x860lm 3000K CRI 90

2x995lm 1x995lm 3000K CRI 85

2x1100lm 1x1100lm 4000K CRI 85

direct 2x26°

0. 33401.HQ

0. 33401.WW

0. 33401.NN

direct 2x26°

0. 33411.HQ

0. 33411.WW

0. 33411.NN

260

Narancia Fixed wall mounted projector with direct/indirect light distribution for metal halide lamps, halogen lamps and compact ﬂuorescent lamps

CDM-TC / G8.5

QT-DE / R7s

TC-T GX24d-1

TC-TE GX24q-1

TC-T GX24d-2

TC-TE GX24q-2

74,9

1x20 Watt

0. 11009.00

1x35 Watt

0. 11011.00

1x70 Watt

0. 11013.00

1x120 Watt

1x13 Watt

1x18 Watt

HPF

0. 11026.00

0. 11020.EV

0. 11019.00

0. 11022.EV

0. 11021.00

QT-DE / R7s

TC-T GX24d-1

TC-TE GX24q-1

TC-T GX24d-2

TC-TE GX24q-2

Narancia Fixed wall mounted projector with indirect light distribution for metal halide lamps, halogen lamps and compact ﬂuorescent lamps

CDM-TC / G8.5

74,9

1x20 Watt

asymmetric beam 2x55°

322

0. 11001.00

1x35 Watt

0. 11003.00

1x70 Watt

0. 11005.00

1x120 Watt

1x13 Watt

1x18 Watt

HPF

0. 11016.EV

0. 11015.00

0. 11018.EV

0. 11017.00

0. 11024.00

Narancia

PROJECTORS

Fixed / adjustable projector

Narancia Fixed wall mounted projector with direct/indirect light distribution for double ended metal halide lamps, halogen lamps and compact ﬂuorescent lamps

HIT-DE / RX7s

HIT-DE / FC2

QT-DE / R7s

TC-TE / GX24q-3 TC-TE / GX24q-4

114,2

1x70 Watt

1x150 Watt

1x250 Watt

1x230 Watt

2x32 Watt

2x42 Watt

0. 11043.00

0. 11046.EV

0. 11050.EV

0. 11078.00

0. 11073.00

0. 11075.00

0. 11097.00

0. 11099.00

0. 11047.00 Version: with stand-by halogen lamp 1x100 Watt

0. 11045.00

0. 11048.EV

0. 11052.EV

74,9

QT-DE/ R7s Version: for permanent illumination when used as emergency lighting

Narancia Fixed wall mounted projector with indirect light distribution for double ended metal halide lamps, halogen lamps and compact ﬂuorescent lamps

HIT-DE / RX7s

HIT-DE / FC2

QT-DE / R7s

TC-TE / GX24q-3 TC-TE / GX24q-4

114,2

1x70 Watt

1x150 Watt

0. 11031.00 asymmetric beam

1x250 Watt

1x230 Watt

0. 11038.EV

0. 11076.00

2x32 Watt

2x42 Watt

0. 11065.00

0. 11067.00

0. 11089.00

0. 11091.00

0. 11034.EV 0. 11035.00

2 x54° Version: with stand-by halogen lamp 1x100 Watt

0. 11033.00 74,9

asymmetric beam

0. 11040.EV 0. 11036.EV 0. 11037.00

QT-DE/ R7s Version: for permanent illumination when used as emergency lighting

2 x54°

Visit www.reggiani.net/code to access the product datasheet.

323

Track systems

3 CIRCUITS

For surface and recessed installation SURFACE

RECESSED INSTALLATION

3-circuit track for surface mounting Mains voltage (16 A at 230V) 3-circuits: L1 + L2 + L3 + neutral + earth (16A / 230V ) 3-circuit track for recessed mounting Mains voltage (16 A at 230V). Standard ﬁnishes: 10 white 21 black 28 metallised grey 30 anodised aluminium

SISTEMA DA SUPERFICIE E DA INCASSO Live end

3-circuit track for surface mounting 0.02240.00

32,5 32,5

0.02251.00

l. mm 2000

0.02241.00

l. mm 3000

0.02242.00

l. mm 4000

T-Coupler

66 0.02259.00 It can be used as ballast.

Finishes: .10 .21

Finishes: .10 .21 .30

Live end, mirror image

3-circuit track for recessed mounting

32,5

100

0.02244.00

l. mm 2000

0.02245.00

l. mm 3000

0.02246.00

l. mm 4000

0.02252.00

100

T-Coupler

66 0.02260.00 It can be used as ballast.

Finishes: .10 .21

Finishes: .10 .21 .30

Centre feed

3-circuit adapter with nipples

0.02253.00

0.02270.00

100

66 0.02261.00 It can be used as ballast.

Finishes: .10 .21 .28

Finishes: .10 .21

100

90° elbow earth inside

Adapter features: Nominal values

T-Coupler

10A, 250V

Protection class

Tractional force

10 Kg

0.02257.00 It can be used as ballast.

100

T-Coupler

66 0.02262.00 It can be used as ballast.

Finishes: .10 .21

Bending tool

90° elbow earth outside

X-Coupler

0.02247.00

0.02258.00 It can be used as ballast.

0.02263.00 It can be used as ballast.

Max. torsional stress.

0,25 Kg m

Finishes: .10 .21 Finishes: .10 .21

Adjustable corner connector 60°-300°

End cap dead end 0.02264.00

0.02256.00

Straight connector

160

Finishes: .10 .21

0.02254.00 Finishes: .10 .21

In order to guarantee the IP40 degree of protection, the track needs the relative blanking cover 0.02248.00

324

Blanking cover l. mm 3000

Flexible corner connector 0°-360°

0.02248.00

0.02255.00

Finish: .10

175

Finishes: .10 .21

La rapida evoluzione tecnologica del LED fa si che le sue prestazioni siano costantemente in evoluzione. I dati tecnici esposti sono aggiornati al Marzo 2012. Consultate le schede tecniche ON LINE per le speciﬁche attuali.

Track systems

3 CIRCUITS

For suspended installation

Suspension system for 3-circuit track • covering of power inlets; • feasy installation (no parts need to be removed during mounting) and adjustable height.

SISTEMA A SOSPENSIONE Centre feed suspension F max 20 kg

Point clamp suspension 0.02283.00* *to be completed with code 0.02223.00 - 0.02224.00

0.02285.00

100

Finishes: .10 .21

Conduit suspension set F max 20 kg

Rod suspension set M6 F max 20 kg

Wire suspension set M6 F max 20 kg

0.02280.00* Ø mm 16 l. mm 1000

0.02223.00* l. mm 1000

0.02224.00* l. mm 1500

*to be completed with relative coupler suspensions. (0.02284.00 / 0.02285.00 etc.)

*to be completed with relative coupler suspensions. (0.02283.00 / 0.02284.00 / 0.02285.00 etc.)

*to be completed with relative coupler suspensions (0.02283.00 / 0.02284.00 / 0.02285.00 etc.)

Finishes: .10 .21

2264

RIDGE ON TRACK

2251 2263

2264

2259

2256

2263 2264

2257

2264 RIDGE ON TRACK

2252 2260

2256

2263 2264

OR AS AN ALTERNAVE

2252

2251 2258

2257

RIDGE ON TRACK

2252 2262

2256

2264 OR AS AN ALTERNAVE

2251

2258

2257

Installation examples

Accessories for surface mounted tracks Ceiling clamp

0.02268.00

Finishes: .10 .30

0.02249.00

Finishes: .30

800

Support for centre feed

Suspension clamp 0.02266.00

Cover plate for connectors 0.02250.00

0.02269.00

Finishes: .30

70 Accessories for recessed tracks Cover plate for feeds

Arm for track wall mounting

Wall bracket

0.02265.00

182

0.02267.00 l. mm 182

Finishes: .10 .30 Finishes: .30

Finishes: .10 .21

www.reggiani.net/codice per accedere alla scheda tecnica di prodotto.

325

Track systems

3 CIRCUITS

Enclosed track for suspended installation

Enclosed 3-circuit track for suspended mounting. Mains voltage (16 A at 230V). 3-circuit: L1 + L2 + L3 + neutral + earth

Enclosed 3- circuit track for suspended mounting 0.02230.00

l. mm 2000

0.02231.00

l. mm 3000

Enclosed live end 0.02232.00

Enclosed 90° elbow earth inside 0.02235.00

Finishes: .10 .21 .28 Finishes: .10 .21 .28

Finishes: .10 .21 .28

3-circuit adapter with nipples 0.02270.00

Enclosed live end, mirror image

Enclosed 90° elbow earth outside

0.02233.00

0.02236.00

Finishes: .10 .21 .28

Straight connector

End cap dead end

0.02234.00

0.02264.00

Finishes: .10 .21

Rod suspension set M6 F max 20 kg

Wire suspension set M6 F max 20 kg

0.02223.00 l. mm 1000

0.02224.00 l. mm 1500

Finishes: .10 .21

Finishes: .10 .21 .28

Adapter features: Nominal values

10A, 250V

Protection class Tractional force Max. torsional stress

10 Kg 0,25 Kg m

Bending tool 0.02247.00

326

Track systems

3 CIRCUITS

Installation notes for 3-CIRCUIT TRACKS

Installation of the connector part to the track When installing the connector parts on the track, make sure that the guide enters the duct at the bottom of the track. Mechanical joining of the connector parts to the track is through self-locking screws.

INSTALLATION OF THE MULTIADAPTER 1 Insert the Multiadapter in the track. 2 Turn the mechanical mounting pin clockwise. 3 Select the required phase with the phase selector pin.

Guide 3

Track

To remove the Multiadapter from the track, turn the phase selector to the OFF position, then turn the mechanical mounting pin anti-clockwise.

Locking screw

To cut electrified tracks The electrified tracks are supplied in the standard lengths. They can be easily cut to the required length with a hacksaw or circular saw suitable for cutting aluminium. After cutting the track, bend the conductors at 90° using tool code 0.02247.00. The conductors can be introduced in the required size and terminated with a plastic block at the other end of the tool. The bent conductors are located at the correct distance from the end of the track when the plastic block does not project but remains flush with the end of the track. CONNECTION OF 3-CIRCUIT TRACK

230 V ~ 16 A, 3.7 kW

L N

2 1 3 Max. 16 A

1 Circuit

MOUNTING DISTANCE AND LOAD CAPACITY The tracks are supplied with mounting holes. Recommended mounting distance: 1000 mm

230/400 V ~ 16 A, 11.1 kW L2 L1 L3 N

3 Circuits

N.B. A load not exceeding 10 kg is permissible for an adapter with power disconnected, tractional force of 100 N (1 kp + 9.81 N) and max. torsional stress 2.5 Nm

Max. 16 A L=1000 mm

100 200 50N 50N 50N 50N 50N L=2000 mm

230 V ~ 16 A, 3.7 kW L2 L1 L3 N

3 Phases

100 200

Max. 16 A

www.reggiani.net/codice per accedere alla scheda tecnica di prodotto.

5N 5N

327

Track systems

1 CIRCUIT

Ultra low proﬁle

Ultra low proﬁle, surface mounted 1-circuit track. Mains voltage (16 A at 230 V).

Live end

Straight connector

0.02120.00

0.02121.00

Finishes: .10 .21

Adapter with nipples

End cap

L-Coupler

0.02131.00

0.02122.00

0.02123.00

Finishes: .10 .21

Adapter features:

T-Coupler

X-Coupler

Protection class

0.02124.00

0.02125.00

Finishes: .10 .21

1-circuit track for surface mounting

25 15 35

328

0.02112.00

l. mm 2000

0.02113.00

l. mm 3000

Finishes: .10 .21

www.reggiani.net/codice per accedere alla scheda tecnica di prodotto.

3 ACCENSIONI

Track systems Da sospensione

NEXT- Oxford Street - London, Great Britain 329

330

PENDANTS SPECTRA LOROSAE MAANTIS B&S PASIOS

photo: Luc Boegly

Pendants are used for soft ambient lighting or directed lighting in areas of any size. Their installation position makes them extremely visible so pendants must combine technical qualities with appealing aesthetics that ďŹ ts in well with any setting they are installed in. The Reggiani product range offers excellent pendant models by great architects and designers to suit all lighting needs.

Biblioteca Universitaria Lettere e Scienze Umanitarie - Brest - Architetti Emanuelle e Laurent Beaudouin 331

Spectra

PENDANTS

Pendant

Design: Dâ&#x20AC;&#x2122;Alesio&Santoro

Spectra Understatement and minimalism translate into linear light. Spectra. An indisputably elegant

332

pendant that encompasses evolved technologies in a minimal design. Its arched shape becomes even more invisible when it

is suspended in the setting, radiating its powerful, comfortable light provided by its over 616 high efďŹ ciency LEDs. (d 96)

Spectra

PENDANTS

Pendant

L’Orologeria Roma

Code: 0.25000.00

Pendant with extruded aluminium structure only 13 mm thick, slightly curved and hanging from cables (3000 mm). Prismatic safety shield with special optical films that can focus the light beam from over 616 high efficiency LEDs, 48W 2957lm (62lm/W), with colour temperature of 3900 K (bin selected), CRI ›85. Constant current driver housed in the ceiling. Standard finish: 28 metallised grey

IP 40

800

3000

1620

90 65

Visit www.reggiani.net/code to access the product datasheet.

333

Lorosae

PENDANTS

Pendant

Design: Álvaro Siza

Lorosae Created in 1999 to light an exhibition of his work in the Basilica Palladiana, Vicenza, Lorosae has the same classic harmonious beauty as Palladian architecture. Its essentially pure forms rise above time and fashion and can naturally ﬁt into and embellish settings of any architectural style. Lorosae retains all its charm and beauty derived from the outstanding perfection of its proportions in each of its 334

many models and sizes. The Lorosae versions: pendant and wall mounted luminaire, in methacrylate or blown glass; it comes in four different sizes and ﬁve different colours.

Lorosae Pendant

foto Guido Siviero

PENDANTS

Compagnia di San Paolo - Torino Álvaro Joaquim Melo Siza Vieira was born in Matosinhos, Portugal, in 1933. From 1949-55 he studied at the School of Architecture, University of Porto (ESBAP). His ﬁrst project was ﬁnished in 1954. From 1955-58 he worked with the architect Fernando Távora. In 1976 he was appointed Professor of Construction at ESBAP. He has been Visiting Professor in Lausanne, Bogotá and Harvard. He lives in Porto.

335

Lorosae

PENDANTS

Pendant

Lorosae Pendant with methacrylate diffuser and built-in control gear technology for mains voltage halogen lamps and metal halide lamps

ø 242

HIE / E27

QT-32 / E27

1x150 Watt

1x250 Watt

5000 2x58° 250

0. 02990.00 0. 02987.00

400 ø 700

336

Lorosae

PENDANTS

Pendant

Lorosae Pendant with built-in control gear technology for halogen lamps, incandescent lamps, single-ended metal halide lamps and compact ﬂuorescent lamps Blown glass diffuser

Methacrylate diffuser

10 white

74 blue

75 green

77 red

84 orange

HSGS-GLS / E27

1700 1x100 Watt Methacrylate diffuser 2x49°

280

0. 02992.00

Blown glass diffuser 2x49°

0. 02982.00

Methacrylate diffuser 2x48°

0. 02991.00

Blown glass diffuser 1700

2x48°

0. 02981.00

190

HIE / E27

HSGS-GLS / E27

TC-TE / GX24q-3

TC-TE / GX24q-4

TC-TE / GX24q-5

1x70 Watt

1x100 Watt

1x26 / 32 Watt

1x42 Watt

1x57 Watt

1700

Methacrylate diffuser 2x50°

0. 02989.00

2x49°

0. 02993.00

2x54° / 2x57° Version: Dimmable (1-10V DC)

0. 02994.00

2x57°

0. 02988.00

2x57°

0. 02979.00 0. 02969.00

Blown glass diffuser 2x50° 2x49° 2x54° / 2x57°

0. 02986.00 0. 02983.00 0. 02984.00 0. 02968.00

Version: Dimmable (1-10V DC)

2x57°

0. 02985.00

2x57°

0. 02980.00

Visit www.reggiani.net/code to access the product datasheet.

337

Maantis

PENDANTS

Pendant

Design: Rogers Stirk Harbour + Partners

Maantis “Our initial concept was to see the technical lighting system as a creature; to produce an object that was luminous, whether it was on or off (...), an object throbbing with life (...). I believe Maantis is a benchmark in the design of ofﬁce lighting but it is also a beautiful design object that people could want for their own homes.

338

Beautiful, yes, but also incredibly functional.” Richard Rogers

Openly inspired by the incredible forms of the Manta ray and the iridescent colours of deep sea ﬁsh, Maantis harmonises aesthetic values and high-tech content, as a testimonial of how it is possible to have everything in one, without needing to make choices or relinquish anything.

PENDANTS

Maantis Pendant

Ristopasto Cosenza

Maantis comes in three lengths and a number of versions and is unsurpassable for lighting and decorating any setting. A special accessory makes it possible to connect up to six Maantis luminaires in line to create a more than 10-metre long pendant light sculpture.

Sir Richard Rogers was born in Florence in 1933 and made his name designing emblematic buildings such as the Pompidou Centre, Lloydâ&#x20AC;&#x2122;s of London, the European Court of Human Rights in Strasbourg and the London Millennium Dome. His studio, Rogers Stirk Harbour + Partners (RSHP) has ofďŹ ces in London, Barcelona, Madrid and Tokyo. One of his most recent prominent designs is the new tower for the World Trade Center, New York.

339

Maantis

PENDANTS

Pendant

Maantis Pendant with direct/indirect light distribution

Short T5 / FH - FQ 554

2x21 / 2x39 Watt

1080

provision for DALI RGB LED circuit

124 0. 20800.00

0. 20853.00 Short + 1 adjustable projector T5 / FH - FQ

850

1113

2x21 / 2x39 Watt 33 200 CDM-TC / G8.5

QR111 / G53

1x35 Watt

1x65 Watt

provision for DALI RGB LED circuit

0. 20801.00

0. 20854.00

0. 20802.00

0. 20855.00

Medium T5 / FH - FQ 554

2x28 / 2x54 Watt

1380

provision for DALI RGB LED circuit

124 0. 21100.00

0. 21160.00 Medium + 1 adjustable projector T5 / FH - FQ 1150

2x28 / 2x54 Watt 1413

33 200 predisposto per DALI

CDM-TC / G8.5

QR111 / G53

1x35 Watt

1x65 Watt

circuito LEDs RGB

0. 21101.00 0. 21161.00

0. 21103.00 0. 21163.00

340

Maantis

PENDANTS

Pendant

Maantis Pendant with direct/indirect light distribution

Long T5 / FH - FQ

554 2x35 / 2x49 Watt

1680

provision for DALI RGB LED circuit

124 0. 21400.00

0. 21460.00 T5 / FH - FQ

2x80 Watt provision for DALI RGB LED circuit 0. 21550.00

0. 21609.00 Long + 1 adjustable projector T5 / FH - FQ

1450

1713

2x35 / 2x49 Watt 33 200 CDM-TC / G8.5

QR111 / G53

provision for DALI RGB LED circuit 1x35 Watt

1x70 Watt

0. 21461.00

0. 21403.00 0. 21463.00

0. 21402.00 0. 21462.00

1x65 Watt

0. 21401.00

T5 / FH - FQ

2x80 Watt CDM-TC / G8.5

QR111 / G53

1x35 Watt 1x70 Watt

1x65 Watt

provision for DALI RGB LED circuit

0. 21551.00 0. 21610.00

0. 21612.00

Visit www.reggiani.net/code to access the product datasheet.

0. 21552.00 0. 21611.00

0. 21553.00

341

B&S

PENDANTS

Pendant

Design: Brombini & Saccardo

B&S Fruit of a project by architects Brombini & Saccardo, B&S is a pendant with a vaguely Bauhausinspired line designed for large spaces. The fins on the aluminium body perform both an aesthetic and a heat dissipation function, while the reflector with its minimal design very effectively lights the space below. The methacrylate reflector gives the added option of 342

diffused lighting as well as direct lighting. The perfect use for B&S IP55 is in large settings with high ceilings – shopping centres, lofts and showrooms.

B&S IP55 pendant with built-in control gear technology for metal halide lamps and single-ended sodium vapour lamps

ST / E40

ø185

3000

1x100 Watt

ST MT / E40

1x150 Watt

QT32 / E27

1x250 Watt

Reﬂector made from white lacquered aluminium 597

2x32°

0. 02910.EV

300 ø 605

2x33°

0. 02911.EV

2x32°

0. 02912.EV

2x32°

0. 02913.EV

Diffuser made from opal white methacrylate 2x36°

0. 02933.EV

2x37° 2x39° 2x36°

0. 02934.EV 0. 02935.EV 0. 02936.EV

Visit www.reggiani.net/code to access the product datasheet.

343

Pasios

PENDANTS

Pendant

Design: Fabio Reggiani

Pasios Unmistakeable and original projector, the distinguishing feature of Pasios is its singular fan shape. Its exceptional control of light and high degree of protection (up to IP66) make it suitable for safe use in any setting. Pasios can be enriched by an optional bright diffuser formed of a metal structure and sixteen coloured or transparent polycarbonate segments to enhance and 344

restyle the essential design of the projector.

See a description of the Pasios surface-mounted projector in the Exterior luminaires section.

PENDANTS

Pasios Pendant

The unusual conďŹ guration of the diffuser gives designers the possibility of composing the desired colour. The diffuser is made up of the metal structure and sixteen segments (eight top and eight bottom).

345

346

TAILOR-MADE PRODUCTS

The universe of a business organisation spins about a central sun populated by designers, architects, technicians and customers. Thanks to a network of internal connections, the contributions of each of these individuals are all interrelated. These complex information flows can be characterised in the form of a relational platform. And it is precisely this intensive system of connections between the various actors of the design process, this regime of collective processing, that gives rise to “RE Link” by Reggiani. “RE Link” is a robust and structured expression of Reggiani’s ability and desire to extend its skills in the construction of proactive relations, surrounding itself with diverse knowledge resources, and penetrating new design capabilities. “RE Link” denotes the ability to consistently find solutions targeted to meet specific requirements, identifying new implementation paths that are capable of responding adequately to parameters of effectiveness, environmental compatibility and safety. It is here that Reggiani’s scientific skills are brought to bear in an elegant and

flexible manner to generate personalised solutions. The approach to light and the method of construction of partnerships is exemplified by the retail environment: the light utilised in each commercial sector is never a random choice but is instead the result of careful planning and collaboration. Reggiani is an important player in this context and can offer a range of competences: technical support and lighting technology consultancy, solutions that can optimise quality, efficiency and running costs, through to the design and realisation of custom-built luminaires in compliance with comfort parameters and energy regulations in the country of operation.

347

Linea Luce LED

RECESSED LUMINAIRES

Modular recessed lighting system

Palazzo di Propaganda Fide

Modular recessed lighting system 348

RECESSED LUMINAIRES

Linea Luce LED Modular pendant lighting system

349

Linea Luce LED

RECESSED LUMINAIRES

Modular recessed lighting system In order to achieve the desired lighting conﬁguration, when ordering it is necessary to indicate the codes for: the recessed lighting segments of Linea Luce, the coupler, the end covers and the relative driver.

Conﬁguration example 31500

Quick-ﬁt plug

Linea Luce, length. 602 mm

31545

31520

Coupler

Linea Luce, length 1202 mm

31540 End cover

31547 Diffuser

Diffuser

31540 End cover

Linea Luce LED Modular recessed lighting segments with LEDs.

IP20 IP43

33mm

3000K CRI 85

L. 602

4000K CRI 85

RGB LEDs

Watt

Linea Luce, length. 602 mm

Driver

Device to control RGB LEDs

Driver 15

0. 31500.WW 0. 31500.NN

7,5

0. 31505.WW 0. 31505.NN

0. 31550.00 0. 31550.00 0. 31600.00

Watt

0. 31630.00

0. 31631.00

0. 31632.00

0. 31550.00

Driver

Device to control RGB LEDs

36 36

L. 802 Linea Luce, length. 802 mm

Driver

0. 31510.WW 0. 31510.NN

0. 31515.WW 0. 31515.NN

0. 31550.00 0. 31550.00 0. 31605.00

Watt

0. 31630.00

0. 31631.00

0. 31632.00

0. 31550.00

Driver

Device to control RGB LEDs

36 36

L. 1202 Linea Luce, length. 1202 mm

Driver

0. 31520.WW 0. 31520.NN

0. 31525.WW 0. 31525.NN

0. 31555.00 0. 31550.00 0. 31610.00

Watt

0. 31630.00

0. 31631.00

0. 31632.00

0. 31555.00

Driver

Device to control RGB LEDs

36 36

L. 2402 Linea Luce, length. 2402 mm

Driver

0. 31530.WW 0. 31530.NN

0. 31535.WW 0. 31535.NN

0. 31555.00 0. 31555.00 0. 31615.00

0. 31630.00

0. 31631.00

0. 31632.00

0. 31555.00

Linea Luce LED Complementary elements Module, length 50 mm

Module, length 100 mm

36 L. 50

36 L.100

36 25

35 Corner module L. 35

350

Watt 2

0. 31450.WW

0. 31450.NN

1,5

0. 31455.WW

0. 31455.NN

2,5

0. 31460.WW

0. 31460.NN

1,5

0. 31465.WW

0. 31465.NN

0. 31470.WW

0. 31470.NN

0,5

0. 31475.WW

0. 31475.NN

Linea Luce LED

RECESSED LUMINAIRES

Modular recessed lighting system End cover

Diffuser

Two end covers included in every pack

length 3000 mm 0. 31540.00

0. 31547.00 We recommend positioning the shield as shown

Coupler to join two or more Linea Luce lighting segments together 0. 31545.00

Control gear technology Driver: electronic, 100-240V 50/60Hz out 24VDC 0. 31550.00

100-240V 50/60Hz out 24Vcc 20W

0. 31565.00

Emergency pack, max 30W

0. 31555.00

100-240V 50/60Hz out 24Vcc 100W

0. 31560.00

DALI/SWITCH DIM device to install between driver and LED module, max 120W

Linea Luce, RGB LEDs

ConďŹ guration example

Interface device to control RGB LEDs RGB-DALI

230 V AC L Driver 20/100W N

Watt

0. 31630.0000

1-10V

0. 31631.0000

DALI

0. 31632.0000

DMX

+ -

31631 Blue

1 for each colour +

31631 Green DALI

B (-) G (-) R (-) RGB LED-module

31631 Red

Driver 20/100W

31632 DMX LED

Driver 20/100W

31630 1-10V LED

Visit www.reggiani.net/code to access the product datasheet.

351

Linea Luce LED Linea Luce, length. 602 mm

610x33mm

Conﬁguration example ELECTRONIC DRIVER 31550 (20W) Max. distance 300 cm 31500 31540

31540

(15W)

4mm+

602

+4mm

Linea Luce, length. 1202 mm

1210x33mm

Conﬁguration example ELECTRONIC DRIVER 31555 (60W) Max. distance 300 cm 31520 31540

31540

(20W)

4mm+

1202

+4mm

Linea Luce, length. 1802 mm

1812x33mm

Conﬁguration example ELECTRONIC DRIVER 31555 (60W) Max. distance 300 cm 31500 31540

4mm+

352

(15W)

602

31545 (15W)

31520 (30W)

1202

31540

+4mm

Linea Luce LED

PENDANTS

Modular pendant lighting system In order to achieve the desired lighting conﬁguration, when ordering it is necessary to indicate the codes for: the pendant lighting segments of Linea Luce, the end covers and the coupler (if necessary). Each luminaire includes: • suspension wires (l. 2000 mm) with ceiling rose (ø 14 mm) and lower friction device. • power supply cable with hidden ( ø 40 mm) ceiling rosette (cut-out ø 33 mm).

Conﬁguration example 39500 Linea luce length 600 mm

39545

39520

Coupler

Linea luce length 1200 mm

39540 End cover

31547 Diffuser

Diffuser

39540 End cover

Linea Luce LED Modular recessed lighting segments with LEDs and driver

3000K CRI 85

37 600

4000K CRI 85

37 Watt

Linea luce length 600 mm 15

0. 39500.WW

0. 39500.NN

7,5

0. 39505.WW

0. 39505.NN

Watt

37 Linea luce length 800 mm

800

0. 39510.WW

0. 39510.NN

0. 39515.WW

0. 39515.NN

Watt

37 Linea luce length 1200 mm

1200

0. 39250.WW

0. 39250.NN

0. 39525.WW

0. 39525.NN

Watt

Linea luce length 2400 mm

37 2400

0. 39530.WW

0. 39530.NN

0. 39535.WW

0. 39535.NN

End cover Two end covers included in every pack 0. 39540.00

Coupler

Diffuser

to join two or more Linea Luce lighting segments together

length 3000 mm 0. 31547.00

0. 39545.00

We recommend positioning the shield as shown

Visit www.reggiani.net/code to access the product datasheet.

353

Mosaico EasyIOS

RECESSED LUMINAIRES

Surface mounted / pendant modular recessed lighting system (trimless or with bezel)

Topshop Topman - New York,, USA

354

Mosaico EasyIOS RECESSED LUMINAIRES Surface mounted / pendant modular recessed lighting system (trimless or with bezel)

Dedon Showroom - Hong Kong

355

Mosaico EasyIOS

RECESSED LUMINAIRES

Modular recessed lighting system (trimless or with bezel) In order to achieve the desired lighting conﬁguration, the structure is supplied without optical compartments. When ordering, it is necessary to indicate the codes for: the structure, the body, the IOS optics, the control gear technologies for metal halide lamps or the transformer for 12 V halogen lamps.

Recessed lighting system

Conﬁguration example

4081 Back housing with bezel for 2 optical compartments

4104

4101

Body with LED LUCE and driver

Body for metal halide lamps

11300

35050

IOS optics

LL2 IOS optics

8090 Control gear

Trimless back housing for 1 optical compartment

Back housing with bezel for 1 optical compartment

Trimless back housing for 2 optical compartment

Back housing with bezel for 2 optical compartment

157

148

180

148

180

148

180

288

325

148x148mm

155x155mm

288x148mm

310x155mm

0. 04070.00

0. 04080.00

0. 04071.00

0. 04081.00

Body and optical compartments on pg. 359-360

356

Mosaico EasyIOS

RECESSED LUMINAIRES

Modular recessed lighting system with bezel Conﬁguration example 4032

4010

4014

4034

4011

4033

End cover

300 mm module

Extension module

Retaining spring

600 mm module

Corner element

4101

4104

Body for metal halide lamps

Body with LED LUCE and driver

11300 IOS optics

35050

4031

4030

Coupler

Drawn rods

8090

LL2 IOS optics

Control gear

300 mm module

300

600 mm module

145

600

160 Module for max 2 optical compartments

Module for max 4 optical compartments 0. 04011.00

Pair of drawn rods for installation with bezel (length 3000 mm) Finish

0. 04032.00

0. 04030.00

21 black

0. 04033.00

1200 mm module

Module for max 6 optical compartments 0. 04012.00

ClikFix retainer device (2 pcs) for pair of drawn rods (spacing 350 mm)

145 160

Module for max 8 optical compartments 0. 04013.00

Connector (2 pcs)

Finish 0. 04034.00

Fitting for air conditioning, Ø 100 mm

21 black

1200

145 160

Finish

Finish 0. 04031.00

Front cover plate (length 300 mm)

Finish 0. 04091.00

21 black

Finish 0.S8567.00

21 black

Hinged ﬂap (length 300 mm)

Finish 0.S8568.00

21 black

Corner element, 90°

Finish

Front cover plate (length 300 mm) with cut-out for 1 projector

900

Finish

21 black

Extension module from 10 to 130 mm

0. 04014.00

145 160

0. 04010.00

Pair of end covers

900 mm module

21 black

Finish 0.S8409.00

21 black

Body and optical compartments on pg. 355-356 Visit www.reggiani.net/code to access the product datasheet.

357

Mosaico EasyIOS

RECESSED LUMINAIRES

Trimless modular recessed lighting system Conﬁguration example 4022 End cover

4010

4014

4011

4023

300 mm module

Extension module

600 mm module

Corner element

4101

4104

Body for metal halide lamps

Body with LED LUCE and driver

11300

35050

IOS optics

4021

4020

Coupler

Drawn rods

8090

LL2 IOS optics

Control gear

300 mm module

300

600 mm module

145

600

160 Module for max 2 optical compartments

1200 mm module

1200

145

Module for max 6 optical compartments

0. 04011.00

0. 04012.00

Coupler

Module for max 8 optical compartments 0. 04013.00

Extension module from 10 to 130 mm

Finish

21 black

0. 04020.00

Finish

21 black

0. 04021.00

Fitting for air conditioning, Ø 100 mm Finish 21 black

21 black

0. 04014.00

Front cover plate (length 300 mm)

Finish 0. 04091.00

145 160

160

Pair of drawn rods for trimless installation (length 3000 mm)

Corner element, 90°

0. 04023.00

900

Module for max 4 optical compartments

Finish 0. 04022.00

145 160

0. 04010.00

Pair of end covers

900 mm module

Front cover plate (length 300 mm) with cut-out for 1 projector

Finish 0.S8567.00

21 black

Finish 0.S8568.00

21 black

Hinged ﬂap (length 300 mm) Finish 0.S8409.00

21 black

Body and optical compartments on pg. 355-356

358

Mosaico EasyIOS

RECESSED LUMINAIRES

Kit: optical compartment with LED LUCE and control gear technology IP20 IP20 1x14W

ø 135

1x26W

860lm 3000K CRI 90

995lm 3000K CRI 85

1100lm 4000K CRI 85

0. 04104.HQ

0. 04104.WW

0. 04104.NN

2070lm 3000K CRI 94

2408lm 3000K CRI 85

2535lm 4000K CRI 84

0. 04106.HQ

0. 04106.WW

0. 04106.NN

Driver Version: Phase cut dimming

Version: Non-dimmable

Version: Dimmable (1-10V DC)

V. 04104.HQ

V. 04104.WW

V. 04104.NN

V. 04106.HQ

V. 04106.WW

V. 04106.NN

Version: DALI dimming

D.04104.HQ

D.04104.WW

D.04104.NN

D.04106.HQ

D.04106.WW

D.04106.NN

IOS optics for LED LUCE 0. 35050.00

2x 6°

0. 35049.00

2x 8°

0. 35051.00

2x11°

0. 35052.00

2x15°

0. 35053.00

2x26°

0. 35054.00

W. W. Mira

Optical compartment for metal halide lamps

IP20 IP40 MT / G12

ø 135

1x20 Watt

Optical compartment

1x35 Watt

1x70 Watt

CDM-TC / G8.5

1x150 Watt

1x20 Watt

1x35 Watt

1x70 Watt

0.04100 .00

0.04101 .00

IOS optics CDM-TC / G8.5

CDM-T / G12

0. 03305.00

2x 5°/ 6°/ 7°/ 8°

0. 11300.00

0. 03306.00

2x15°/11°/12°

0. 11301.00

2x17°

0. 03307.00

2x44°/37°/39°/41°

0. 11302.00

2x28°/29°

0. 11303.00

W. W. Mira

0. 03308.00

W. W. Mira

Control gear technology

2x 7°/ 8°

+ 0. 08094.00

HF for metal halide lamps, 20W

0. 08090.00

HF for metal halide lamps, 35W

0. 08096.00

HF for metal halide lamps, 70W

0. 08089.00

HF for metal halide lamps, 150W

Visit www.reggiani.net/code to access the product datasheet.

359

Mosaico EasyIOS

RECESSED LUMINAIRES

Optical compartment for low voltage halogen lamps with built-in reﬂector and metal halide lamps IP20 IP20 QR-111 / G53

ø 135

Optical compartment

1x65 Watt

CDM-R111 / GX8.5

1x20 Watt

0.04102 .00

1x35 Watt

1x70 Watt

0.04103 .00

Control gear technology

360

0. 09196.EV

Electronic transformer, 100W

0. 08094.00

HF for metal halide lamps, 20W

0. 08090.00

HPF for metal halide lamps, 35W

0. 08096.00

HF for metal halide lamps, 70W

RECESSED LUMINAIRES

Mosaico EasyIOS

Topshop Topman - New York, USA

Visit www.reggiani.net/code to access the product datasheet.

361

Mosaico EasyIOS (h. 200)

SURFACE-MOUNTED / PENDANT MODULAR LIGHTING SYSTEM Surface-mounted and pendant modular lighting system In order to achieve the desired lighting conﬁguration, the structure is supplied without optical compartments. When ordering, it is necessary to indicate the codes: the channel, the end covers, the lamp body, the IOS optics and corresponding control gear technologies. For pendant conﬁgurations, when ordering it is also necessary to indicate the codes for the wire set or the rod set.

Conﬁguration example 4142+4143

2200-2201

4141

4131

4141

4130

4135

4135 4140 125

4171

4175

4161 3305

125

600

125

162

4172

4161 3306

4160 11300

1200

162

600 mm module + connectors (2 pcs)

1200 mm module + connectors (2 pcs)

Finish 0. 04130.00

4171

4162 35050

10 white

End covers (2 pcs) + alignment template included

Finish 21 black

0. 04131.00

10 white

Coupling plate (for ceiling mounting only, 1 pc)

Finish 21 black

0. 04135.00

10 white

Finish 21 black

0. 04140.00

10 white

21 black

55 20 30

1-circuit track

Track control gear

L mm Finish

Finish

0. 02200.00 2000 10 white

21 black

0. 02201.00 3000 10 white

21 black

5000 mm long wire (1 pc) + support plate

0. 02208.00

362

10 white

21 black

0. 02220.00

0. 04142.00

10 white

21 black

0. 02211.00

3000 mm long rod conduit (1 pc)

Finish 21 black

Track connector

Finish

Rod device + 5000 mm long wire (1 pc) + support plate

Finish 0. 04141.00

Track end cap dead end

Finish 21 black

0. 04143.00

10 white

21 black

Mosaico EasyIOS (h. 200) SURFACE-MOUNTED / PENDANT MODULAR LIGHTING SYSTEM Surface-mounted and pendant modular lighting system Body with LED LUCE IP20 IP20 1x14W

Version: Phase cut dimming

1x26W

860lm 3000K CRI 90

995lm 3000K CRI 85

1100lm 4000K CRI 85

0. 04162.HQ

0. 04162.WW

0. 04162.NN

Version: Non-dimmable

2070lm 3000K CRI 94

2408lm 3000K CRI 85

2535lm 4000K CRI 84

0. 04164.HQ

0. 04164.WW

0. 04164.NN

Version: Dimmable (1-10V DC)

V. 04162.HQ

V. 04162.WW

V. 04162.NN

V. 04164.HQ

V. 04164.WW

V. 04164.NN

Version: DALI dimming

D.04162.HQ

D.04162.WW

D.04162.NN

D.04164.HQ

D.04164.WW

D.04164.NN

IOS optics for LED LUCE 0. 35050.00

2x 6°

0. 35049.00

2x 8°

0. 35051.00

2x11°

0. 35052.00

2x15°

0. 35053.00

2x26°

0. 35054.00

W. W. Mira

Driver with back housing that has provision for mechanical ﬁxing and cable complete with adapter for wiring connection to 1-circuit track.

+ 0. 04175.00

for RE LED Luce 14W

0. 04176.00

for RE LED Luce 26W

0. 04180.00

Emergency pack SA including Ni/Cd battery with 1h back-up

0. 04181.00

Emergency pack SA including Ni/Cd battery with 1h back-up

Body for metal halide lamps IP20 IP40

MT / G12

1x20 Watt

1x35 Watt

CDM-TC / G8.5

1x70 Watt

1x20 Watt

0.04161 .00

Body

1x70 Watt

0.04160 .00

IOS optics

1x35 Watt

CDM-TC / G8.5

CDM-T / G12

0. 03305.00

2x 5°/ 6°/ 7°/ 8°

0. 11300.00

0. 03306.00

2x15°/11°/12°

0. 11301.00

2x17°

0. 03307.00

2x44°/37°/39°/41°

0. 11302.00

2x28°/29°

0. 11303.00

W. W. Mira

0. 03308.00

W. W. Mira

2x 7°/ 8°

Control gear technology HF control gear with back housing that has provision for mechanical ﬁxing and cable complete with adapter for wiring connection to 1-circuit track.

+ 0. 04170.00

HF for metal halide lamps, 20W

0. 04171.00

HF for metal halide lamps, 35W

0. 04172.00

HF for metal halide lamps, 70W

Visit www.reggiani.net/code to access the product datasheet.

363

Mosaico EasyIOS (h. 125)

Conﬁguration example 4141

4121

4142+4143

2200-2201 4125

4141

4120

4125

4140

200

4171

4175

4151 3305

200

600

200

162

4152 35050

4172

4151 3306

4150 11300

1200

162

600 mm module + connectors (2 pcs)

1200 mm module + connectors (2 pcs)

Finish 0. 04120.00

4171

End covers (2 pcs) + alignment template included

Finish

10 white

21 black

0. 04121.00

10 white

Coupling plate (for ceiling mounting only, 1 pc)

Finish 21 black

0. 04125.00

10 white

Finish 21 black

0. 04140.00

10 white

21 black

55 20 30

1-circuit track

Track control gear

L mm Finish

Finish

0. 02200.00 2000 10 white

21 black

0. 02201.00 3000 10 white

21 black

5000 mm long wire (1 pc) + support plate

0. 02208.00

364

10 white

21 black

0. 02220.00

0. 04142.00

10 white

21 black

0. 02211.00

3000 mm long rod conduit (1 pc)

Finish 21 black

Track connector

Finish

Rod device + 5000 mm long wire (1 pc) + support plate

Finish 0. 04141.00

Track end cap dead end

Finish 21 black

0. 04143.00

10 white

21 black

SURFACE-MOUNTED / PENDANT MODULAR LIGHTING SYSTEM Mosaico EasyIOS (h. 125) Surface-mounted and pendant modular lighting system Body with LED LUCE

IP20 IP20 1x14W

Version: Phase cut dimming

1x26W

860lm 3000K CRI 90

995lm 3000K CRI 85

1100lm 4000K CRI 85

0. 04152.HQ

0. 04152.WW

0. 04152.NN

Version: Non-dimmable

2070lm 3000K CRI 94

2408lm 3000K CRI 85

2535lm 4000K CRI 84

0. 04109.HQ

0. 04109.WW

0. 04109.NN

Version: Dimmable (1-10V DC)

V. 04152.HQ

V. 04152.WW

V. 04152.NN

V. 04109.HQ

V. 04109.WW

V. 04109.NN

Version: DALI dimming

D.04152.HQ

D.04152.WW

D.04152.NN

D.04109.HQ

D.04109.WW

D.04109.NN

IOS optics for LED LUCE 0. 35050.00

2x 6°

0. 35049.00

2x 8°

0. 35051.00

2x11°

0. 35052.00

2x15°

0. 35053.00

2x26°

0. 35054.00

W. W. Mira

Driver with back housing that has provision for mechanical ﬁxing and cable complete with adapter for wiring connection to 1-circuit track.

+ 0. 04175.00

for RE LED Luce 14W

0. 04176.00

for RE LED Luce 26W

0. 04180.00

Emergency pack SA including Ni/Cd battery with 1h back-up

0. 04181.00

Emergency pack SA including Ni/Cd battery with 1h back-up

Body for metal halide lamps IP20 IP40 MT / G12

1x20 Watt

1x35 Watt

CDM-TC / G8.5

1x70 Watt

1x20 Watt

0.04151 .00

Body

1x70 Watt

0.04150 .00

IOS optics

1x35 Watt

CDM-TC / G8.5

CDM-T / G12

0. 03305.00

2x 5°/ 6°/ 7°/ 8°

0. 11300.00

0. 03306.00

2x15°/11°/12°

0. 11301.00

2x17°

0. 03307.00

2x44°/37°/39°/41°

0. 11302.00

2x28°/29°

0. 11303.00

W. W. Mira

0. 03308.00

W. W. Mira

2x 7°/ 8°

Control gear technology HF control gear with back housing that has provision for mechanical ﬁxing and cable complete with adapter for wiring connection to 1-circuit track.

+ 0. 04170.00

HF for metal halide lamps, 20W

0. 04171.00

HF for metal halide lamps, 35W

0. 04172.00

HF for metal halide lamps, 70W

Visit www.reggiani.net/code to access the product datasheet.

365

Mosaico EasyIOS

PENDANTS

Benetton Store, Regent Street - London, Great Britain

366

PENDANTS

Mosaico EasyIOS

Store Benetton Regent Street - Londra, Gran Bretagna

367

Fivespot

PENDANT

Pendat IN ORDER TO ACHIEVE THE DESIRED LIGHTING CONFIGURATION, THE LUMINAIRE IS SUPPLIED WITHOUT INTERCHANGEABLE OPTICS. When ordering, the luminaire code no. and the LL2 IOS or IOS optics code no. must be indicated. LUMINAIRE

+ IOS OPTICS OPTICS

Fivespot Pendant lighting system with 5 optical compartments (adjustable via universal joint), LED LUCE and control gear technology

5x14W

3000

5x26W

2070lm (x5) 3000K CRI 94

2408lm (x5) 3000K CRI 85

2535lm (x5) 4000K CRI 84

Version: Non-dimmable

0.S9898.HQ

0.S9898.WW

0.S9898.NN

Version: Dimmable (1-10V DC)

V. S9898.HQ

V. S9898.WW

V. S9898.NN

860lm (x5) 3000K CRI 90

995lm (x5) 3000K CRI 85

1100lm (x5) 4000K CRI 85

0.S8637.HQ

0.S8637.WW

0.S8637.NN

ø 600 Version: Phase cut dimming

IOS optics for LED LUCE

368

0. 35050.00

2x 6°

0. 35049.00

2x 8°

0. 35051.00

2x11°

0. 35052.00

2x15°

0. 35053.00

2x26°

Fivespot

PENDANT

Pendat

Fivespot Pendant lighting system with 5 optical compartments (adjustable via universal joint), IOS optics and control gear technology for metal halide lamps

CDM-T / G12

3000

5x20 Watt

5x35 Watt

5x70 Watt

0.S8638.00

0.S7392.00

0.S8639.00

ø 600

IOS optics

CDM-T / G12 0. 11305.00

2x 6°

0. 11306.00

2x11°

0. 11307.00

2x37°

0. 11308.00

W. W. Mira

Visit www.reggiani.net/code to access the product datasheet.

369

Ladder

PENDANT

LUMINAIRE

IOS OPTICS

OPTICS

Ladder Pendant lighting system with 2 optical compartments (adjustable via universal joint), LED LUCE and control gear technology

2x14W

860lm (x2 - x4 - x6) 3000K CRI 90

995lm (x2 - x4 - x6) 3000K CRI 85

1100lm (x2 - x4 - x6) 4000K CRI 85

0.S7401.HQ

0.S7401.WW

0.S7401.NN

520 155

130 155

Version: Phase cut dimming

Pendant lighting system with 4 optical compartments (adjustable via universal joint), LED LUCE and control gear technology 1030

4x14W

155

130 155

Version: Phase cut dimming

0.S7801.HQ

0.S7801.WW

0.S7801.NN

Pendant lighting system with 6 optical compartments (adjustable via universal joint), LED LUCE and control gear technology 1560

6x14W

155

130 155

Version: Phase cut dimming

0.S8008.HQ

0.S8008.NN

IOS optics for LED LUCE

370

0.S8008.WW

0. 35050.00

2x 6°

0. 35049.00

2x 8°

0. 35051.00

2x11°

0. 35052.00

2x15°

0. 35053.00

2x26°

0. 35054.00

W. W. Mira

Ladder

PENDANT

Pendat

Ladder Pendant lighting system with 2 optical compartments (adjustable via universal joint), IOS optics and control gear technology for metal halide lamps

CDM-T / G12

520 155

2x20 Watt

2x35 Watt

2x70 Watt

0.S8640.00

0.S5218.00

0.S5219.00

4x20 Watt

4x35 Watt

4x70 Watt

0.S8300.00

0.S5220.00

0.S5221.00

6x20 Watt

6x35 Watt

6x70 Watt

0.S8301.00

0.S5222.00

0.S5223.00

130 155

Pendant lighting system with 4 optical compartments (adjustable via universal joint), IOS optics and control gear technology for metal halide lamps 1030 155

130 155

Pendant lighting system with 6 optical compartments (adjustable via universal joint), IOS optics and control gear technology for metal halide lamps 1560 155

130 155

IOS optics

CDM-T / G12 0. 11305.00

2x 6째

0. 11306.00

2x11째

0. 11307.00

2x37째

0. 11308.00

W. W. Mira

Visit www.reggiani.net/code to access the product datasheet.

371

Ladder

SURFACE MOUNTED

Surface-mounted lighting system IN ORDER TO ACHIEVE THE DESIRED LIGHTING CONFIGURATION, THE LUMINAIRE IS SUPPLIED WITHOUT INTERCHANGEABLE OPTICS.

When ordering, the luminaire code no. and the LL2 IOS or IOS optics code no. must be indicated.

LUMINAIRE

IOS OPTICS OPTICS

Ladder Surface-mounted lighting system with 2 optical compartments (adjustable via universal joint), LED LUCE and control gear technology

2x14W 520

155

860lm (x2) 3000K CRI 90

995lm (x2) 3000K CRI 85

1100lm (x2) 4000K CRI 85

0.S7398.HQ

0.S7398.WW

0.S7398.NN

165 160 200 Version: Phase cut dimming

Surface-mounted lighting system with 4 optical compartments (adjustable via universal joint), LED LUCE and control gear technology

4x14W 1200 860lm (x4) 3000K CRI 90

995lm (x4) 3000K CRI 85

1100lm (x4) 4000K CRI 85

0.S7399.HQ

0.S7399.WW

0.S7399.NN

155 165 160 200 Version: Phase cut dimming

IOS optics for LED LUCE

372

0. 35050.00

2x 6°

0. 35049.00

2x 8°

0. 35051.00

2x11°

0. 35052.00

2x15°

0. 35053.00

2x26°

0. 35054.00

W. W. Mira

Ladder

SURFACE MOUNTED

Surface-mounted lighting system

Ladder Pendant lighting system with 2 optical compartments (adjustable via universal joint), IOS optics and control gear technology for metal halide lamps

CDM-TC / G8.5

520

155 165

2x20W

2x35W

2x70W

0.S8643.HQ

0.S8644.WW

0.S8645.NN

160 200

Pendant lighting system with 4 optical compartments (adjustable via universal joint), IOS optics and control gear technology for metal halide lamps

CDM-TC / G8.5

1200

155

2x20W

2x35W

2x70W

0.S8646.HQ

0.S8647.WW

0.S8648.NN

165 160 200

IOS optics

CDM-TC / G8.5 0. 11300.00

2x 7° / 8°

0. 11301.00

2x17°

0. 11302.00

2x28°/29°

0. 11303.00

W. W. Mira

Visit www.reggiani.net/code to access the product datasheet.

373

Mirror RE LED Glass mirror

Mirror RE LED Glass mirror with two vertical strips of LEDs for a total of 65W + control gear technology

750 610

2x500 LED SMD 24V 4000K CR= 85 1x65 Watt

2013

2071 0.S8302.00

3° 60

H: 3500

100

450

500

550

600

650

700

750

800

800 mm 1200 mm

374

1200 mm

Visit www.reggiani.net/code to access the product datasheet.

375

376

EXTERIOR LUMINAIRES MULTISPOT ENVIOS LINDRO ARGIAK RIOS RIOS PLUS IPERIOS NARANCIA ZAGARA HIBOU UNITED JANIOS PASIOS CYL LIGHT FLURE HILLOCK MURALE METAMORPHOSI OFU

Exterior luminaires need to withstand adverse weather conditions and sometimes even to be walk-over or drive-over resistant. The quality, robustness and degree of protection are vitally important for these lighting bodies. Exterior projectors, recessed luminaires and pendants can be used for both accent and general lighting of architectural elements, squares, gardens, monuments, pathways and particular environments like saunas and swimming pools. The Reggiani product range offers many reliable solutions to suit all lighting needs.

377

Multispot 188

EXTERIOR LUMINAIRES

Fixed recessed luminaire

Design: Fabio NomeReggiani Cognome

Multispot 188 Multispot is a ďŹ xed recessed luminaire for exterior lighting or to light areas that require a high degree of protection like pathways, airports, railway stations, cantilever roofs, stadiums, parking areas, fuel stations and swimming pools.

378

The part recessed into the false ceiling is fully protected by the built-in metal back housing and the pre-wired control gear has the same degree of protection.

EXTERIOR LUMINAIRES

Multipsot 188 Fixed recessed luminaire

379

Multispot 188

EXTERIOR LUMINAIRES

Fixed recessed luminaire STANDARD FINISHES 26 black-graphite 27 white gloss 28 metallised grey Integral back housing

BODY Die-cast aluminium. OPTICS IOS system (Interchangeable Optical System) Instant interchangeability, a full range of beams and high efﬁciency (up to d 90) BACK HOUSING Metal. SHIELD Heat treated clear safety glass (smooth for narrow beams and grainy for medium and wide beams). INSTALLATION Mollablok patented system for adjustable ﬁxing into false ceilings up to 35 mm thick.

Rapid installation with the Mollablok system for ﬁxing into false ceilings up to 35 mm thick.

Ottica

Tecnologie di alimentazione

380

Per le versioni IOS ad alogenuri metallici.

Per le versioni ﬂuorescenti compatte

Riﬂettori IOS Ø130mm, in alluminio purissimo 99.99%, con innesto a baionetta per fasci stretti, medi e larghi.

Riﬂettore ad alta specularità, in alluminio sfaccettato anodizzato.

Alimentazione elettronica o elettromagnetica per lampade ad alogenuri metallici con tecnologia ceramica.

Alimentazione elettronica EEI=A/A per lampade ﬂuorescento compatte.

Multipsot 188

EXTERIOR LUMINAIRES

Fixed recessed luminaire

Multipsot 188 Kit: recessed luminaire with IOS optics and control gear technology for metal halide lamps IP66 IP66

ø188mm CDM-T / G12 240

ø 212

1x20 Watt

1x35 Watt

1x50 Watt

1x70 Watt

1x100 Watt

1x150 Watt

2x 7°

0. 13800.00

0. 13805.EV

0. 50238.00

0. 13810.EV

0. 50241.00

0. 13815.00

2x11°

0. 13801.00

0. 13806.EV

0. 50239.00

0. 13811.EV

0. 50242.00

0. 13816.00

2x25°/24°

0. 13802.00

0. 13807.EV

0. 50240.00

0. 13812.EV

0. 50243.00

0. 13817.00

Multipsot 188 Fixed recessed luminaire with control gear technology for compact ﬂuorescent lamps IP66 IP66

ø188mm TC-TE / GX24q-3 240

ø 212

1x26 Watt 2x56°

0. 08257.EV

Visit www.reggiani.net/code to access the product datasheet.

381

Envios

PROJECTORS

Projector

Design: L. Nome A. P.Cognome D.

Envios ROBUST AND VERSATILE EXTERIOR PROJECTOR. High performance, with plenty of variations to perfectly adapt to design demands and a degree of protection (IP66) that also makes it extremely resistant to the elements (from -20° to +35°C). These are the features of Envios, family of exterior luminaires with RE LED Luce. 382

Reggiani and L.A.P.D. Studio worked together on a lighting design solution for a speciﬁc urban context – Woolwich Squares, London – and came up with Envios for exteriors, which is now a range of luminaires that can perfectly meet the complex conditions required for lighting outdoor spaces. Envios comes in surfacemounted versions and also has a series of accessories so it can be used in

various applications: on suspension cables, poles, walls, adjustable brackets, branches, piers and earth spikes. You can’t get more versatile than this.

PROJECTORS

Envios Projector

Woolwich Squares - London, UK

383

Envios

PROJECTORS

Projector STANDARD FINISHES 26 black-graphite 27 white gloss 28 metallised grey BODY Die-cast aluminium; it is ﬁtted with a passive heat sink that exploits the thermal conductivity of the aluminium and the convection current generated by virtue of the temperature difference in the air around the heat sink, ensuring perfectly efﬁcient and long-lasting light sources.

Cooling ﬁns for optimum heat dissipation

IOS OPTICAL SYSTEM IOS system (Interchangeable Optical System) A full range of beams and high efﬁciency (up to d 90). Structure and LL2/LL4 optics in antistatic metallised polycarbonate with scratch resistant protective coating. Integral satin shield; the combination of innovative materials and surface treatments ensure that this shield maintains good light emission.

Loop-in/loop-out facility for cascade connection.

SAFETY SHIELD Extra-light, tempered safety glass; resistant to temperature and mechanical shock (IK 03 / IK 07). INSTALLATION Surface-mounted projectors; loop-in/ loop-out facility with pre-wired power supply cable for cascade connection. Installation on suspension cables, poles, walls, adjustable brackets, branches, piers and earth spikes. See page

Integral shield that maintains good light emission to produce a uniform light beam

DEGREE OF PROTECTION IP66

Surface exposed to wind

898,3 cm2

384

1498,4 cm2

Envios

PROJECTORS

Projector

Envios RE LED LUCE incorporates the best high efﬁciency LEDs (up to 4400 lm, 80 lm/W) with varying tones of excellent white (3000K 4000K, CRI from 84 to 94). Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous ﬂux).

Optics

Control gear technologies

For Re Led Luce 3W

• Non-dimmable driver (120-240V AC/DC).

For Re Led Luce 37W

• Non-dimmable driver (220-240V AC/DC). • Non-dimmable driver (120 or 240V AC/DC): Triac leading edge phase cut dimmer for incandescent lamps or electronic trailing edge phase cut dimmer for low voltage halogen lamps, for luminous intensity adjustment from 100% to 30%.

For Re Led Luce 14W

• Non-dimmable driver (120 or 240V AC/ DC). • Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%.

For Re Led Luce 4x14W

• Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%.

For Re Led Luce 26W

Emergency lighting

Four IOS reflectors (LL4) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%). The shield is satin for narrow, medium and wide beams.

Emergency packs for exterior installation available on request.

385

Envios

PROJECTORS

Projector

Envios Adjustable projector with IOS optics, LED LUCE and control gear technology

1x3W

154

144

180lm 3000K CRI 85

197lm 4000K CRI 85

650lm 3000K CRI 90

810lm 3000K CRI 83

860lm 4000K CRI 83

2x 7°

0. 30681.WW

0. 30681.NN

0. 30686.HQ

0. 30686.WW

0. 30686.NN

2x15°

0. 30682.WW

0. 30682.NN

0. 30687.HQ

0. 30687.WW

0. 30687.NN

2x24°

0. 30683.WW

0. 30683.NN

0. 30688.HQ

0. 30688.WW

0. 30688.NN

2x 7°

0. 30691.WW

0. 30691.NN

0. 30696.HQ

0. 30696.WW

0. 30696.NN

2x15°

0. 30692.WW

0. 30692.NN

0. 30697.HQ

0. 30697.WW

0. 30697.NN

2x24°

0. 30693.WW

0. 30693.NN

0. 30698.HQ

0. 30698.WW

0. 30698.NN

ø 84

Version: Non-dimmable

1x7W

With base plate

154 ø 84

Version: Non-dimmable

386

Envios

PROJECTORS

Projector

Envios Fixed projector with IOS optics, LED LUCE and control gear technology

Surface-mounted version 1x14W 190

860lm 3000K CRI 90

995lm 3000K CRI 85

1100lm 4000K CRI 85

2x 6°

0. 30701.HQ

0. 30701.WW

0. 30701.NN

2x 8°

0. 30702.HQ

0. 30702.WW

0. 30702.NN

2x11°

0. 30703.HQ

0. 30703.WW

0. 30703.NN

2x15°

0. 30704.HQ

0. 30704.WW

0. 30704.NN

2x26°

0. 30705.HQ

0. 30705.WW

0. 30705.NN

ø 126

Version: Phase cut dimming

1x26W

Version: Dimmable (1-10V DC)

2070lm 3000K CRI 94

2408lm 3000K CRI 85

2535lm 4000K CRI 84

0. 30711.HQ

0. 30711.WW

0. 30711.NN

0. 30712.HQ

0. 30712.WW

0. 30712.NN

0. 30713.HQ

0. 30713.WW

0. 30713.NN

0. 30714.HQ

0. 30714.WW

0. 30714.NN

0. 30715.HQ

0. 30715.WW

0. 30715.NN

Envios Fixed projector with IOS optics, LED LUCE and control gear technology

Surface-mounted version 4x14W 253

3440lm 3000K CRI 90

3980lm 3000K CRI 85

4400lm 4000K CRI 85

2x 9°

0. 30751.HQ

0. 30751.WW

0. 30751.NN

2x11°

0. 30752.HQ

0. 30752.WW

0. 30752.NN

2x16°

0. 30753.HQ

0. 30753.WW

0. 30753.NN

2x21°

0. 30754.HQ

0. 30754.WW

0. 30754.NN

2x36°

0. 30755.HQ

0. 30755.WW

0. 30755.NN

2x 9°

0. 30781.HQ

0. 30781.WW

0. 30781.NN

2x11°

0. 30782.HQ

0. 30782.WW

0. 30782.NN

2x16°

0. 30783.HQ

0. 30783.WW

0. 30783.NN

2x21°

0. 30784.HQ

0. 30784.WW

0. 30784.NN

2x36°

0. 30785.HQ

0. 30785.WW

0. 30785.NN

ø 226

Version: Non-dimmable

Version: Dimmable (1-10V DC)

Visit www.reggiani.net/code to access the product datasheet.

387

Envios

PROJECTORS

Projector

Envios - Accessories

Ø 85mm

Ø 126mm

Ø 226mm

See page 000

The codes provided in this table only apply to the matching accessory to request together with the projector (see page 000) for the desired installation. Example: Projector 30681

Accessory +

30800

Surface mounting

Adjustable bracket for wall mounting

Bracket

Base plate

See page 000

standard

Rigid bracket for wall mounting

Extended arm

Connecting device for cable attachment

388

0.30793.00

0.30794.00

0.30791.00

0.30792.00

0.30800.00

0.30725.00

Connecting system for pole attachment of one projector (diameter of 60 mm to 120 mm).

0.30735.00 for 1 projector

Connecting system for pole attachment of two projectors (diameter of 60 mm to 120 mm).

0.30736.00 for 2 projectors

Envios

PROJECTORS

Projector

Envios - Accessory

Ø 85mm

Bracket Kit for installation of projector on branches and piers

0.30795.00

Earth spike for in-ground installation

0.30796.00

Stand: surface mounting in-ground mounting

0.30797.00 0.30798.00

30798

Ø 126mm

Ø 226mm

Base plate

0.30796.00 to use together with bracket, code 0.30791.00

30797

Anti-glare attachment

0.30730.00

0.30731.00

Anti-glare louvre

0.30739.00

0.30741.00

0.30740.00

0.30732.00

0.30733.00

Fresnel lens

Visit www.reggiani.net/code to access the product datasheet.

389

Lindro

IP66 PROJECTORS

Projector

Design: Fabio Reggiani

Lindro Lindro is a surface-mounted projector with two shapes – modern square and classic round – and two sizes. The high degree of protection (IP66) combined with LED technology means Lindro can withstand harsh outdoor weather conditions (from –20° to +35°C) or particular indoor settings that require a high degree of protection. The larger size houses four LED LUCE LL4 elements (14 or 26 W); the smaller size 390

houses a single LED LUCE LL2 (14, 26 or 39 W). The excellent quality and efﬁciency of LED LUCE and the wide range of light beams available make this luminaire suitable for general or accent lighting in small and/or large spaces, with standard and/or exceptional heights. A version with asymmetric optics including LED LUCE LL5 completes the range, enabling design continuity

in projects where distinctive wall washer lighting is required. Lindro can be attached to a practical mobile bracket (available separately) for adjustment, making it extremely versatile to light buildings, swimming pools, gyms, transport stations, shopping centres, museums and churches.

IP66 PROJECTORS

Lindro Projector

StatOil Petrolstation - Drammen, Norway

391

Lindro

IP66 PROJECTORS

Projector STANDARD FINISHES 26 black-graphite 27 white gloss 28 metallised grey

Loop-in/loop-out facility for cascade connection.

BODY Die-cast aluminium; it is ﬁtted with a passive heat sink that exploits the thermal conductivity of the aluminium and the convection current generated by virtue of the temperature difference in the air around the heat sink, ensuring perfectly efﬁcient and longlasting light sources. OPTICAL SYSTEM Structure and four LL4 optics or LL5 Wall Washer optics in antistatic metallised polycarbonate with scratch resistant protective coating. SHIELD Integral and satin for very narrow, narrow, medium, medium-wide and wide beams; satin with clear glass central lenses for the Wall Washer Mira version.

Integral shield to position on the optics unit to soften the light beam

SAFETY SHIELD Extra-light, tempered safety glass; resistant to temperature and mechanical shock. LL2/LL7: IK03; LL4: IK05 OPTICS IOS system (Interchangeable Optical System) A full range of beams and high efﬁciency (up to d 90). INSTALLATION Surface mounted; loop-in/loop-out facility with pre-wired power supply cable for cascade connection.

ASYMMETRIC LIGHT

Heat sink for optimum heat dissipation

LINDRO can be attached to a practical mobile bracket (available separately) for adjustment, making it extremely versatile.

392

AISI 316 stainless steel bracket for ceiling, wall or ground installation

Lindro

IP66 PROJECTORS

Projector

Lindro RE LED LUCE incorporates the best high efﬁciency LEDs (up to 10140 lm, 80 lm/W) with varying tones of excellent white (3000K 4000K, CRI from 84 to 94). Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous ﬂux).

Optics

Control gear technologies

Four IOS reflectors with Ø 80 mm (LL4) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization - exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%). The shield is satin for narrow, medium and wide beams; satin with clear glass lenses for the Wall Washer Mira version. There are also versions with gold optics.

Wall Washer optics for asymmetric light distribution made from metallised polycarbonate with scratch resistant protective coating.

For Re Led Luce 14W

For Re Led Luce 26W

• Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%.

For Re Led Luce 39W

• Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%. • Driver (220-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 5%.

For Re Led Luce 2x14W

For Re Led Luce 4x14W

• Non-dimmable driver (220/240V). • Driver (220-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 5%.

For Re Led Luce 4x26W

• Driver (220-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 5%.

393

Lindro

IP66 PROJECTORS

Projector

Lindro Fixed projector with IOS optics, LED LUCE and control gear technology

Surface-mounted version 1x14W 111

2070lm 3000K CRI 94

2408lm 3000K CRI 85

2535lm 4000K CRI 84

2x 6°

0. 30470.HQ

0. 30470.WW

0. 30470.NN

2x 8°

0. 30471.HQ

0. 30471.WW

0. 30471.NN

2x11°

0. 30472.HQ

0. 30472.WW

0. 30472.NN

2x15°

0. 30473.HQ

0. 30473.WW

0. 30473.NN

2x26°

0. 30474.HQ

0. 30474.WW

0. 30474.NN

W. W. Mira

0. 30475.HQ

0. 30475.WW

0. 30475.NN

860lm 3000K CRI 90

160

Version: Phase cut dimming

Version: Dimmable (1-10V DC)

995lm 3000K CRI 85

1x26W 1100lm 4000K CRI 85

2x 6°

0. 30460.HQ

0. 30460.WW

0. 30460.NN

2x 8°

0. 30461.HQ

0. 30461.WW

0. 30461.NN

2x11°

0. 30462.HQ

0. 30462.WW

0. 30462.NN

2x15°

0. 30463.HQ

0. 30463.WW

0. 30463.NN

2x26°

0. 30464.HQ

0. 30464.WW

0. 30464.NN

W. W. Mira

0. 30465.HQ

0. 30465.WW

0. 30465.NN

Lindro Fixed projector with IOS optics, LED LUCE and control gear technology

Surface-mounted version 1x14W 111

860lm 3000K CRI 90

2070lm 3000K CRI 94

2408lm 3000K CRI 85

2535lm 4000K CRI 84

2x 6°

0. 30170.HQ

0. 30170.WW

0. 30170.NN

2x 8°

0. 30171.HQ

0. 30170.WW

0. 30171.NN

2x11°

0. 30172.HQ

0. 30170.WW

0. 30172.NN

2x15°

0. 30173.HQ

0. 30170.WW

0. 30173.NN

2x26°

0. 30174.HQ

0. 30170.WW

0. 30174.NN

W. W. Mira

0. 30175.HQ

0. 30170.WW

0. 30175.NN

ø 160

Version: Phase cut dimming

Version: Dimmable (1-10V DC)

394

1x26W 995lm 3000K CRI 85

1100lm 4000K CRI 85

2x 6°

0. 30160.00

0. 30160.WW

0. 30160.NN

2x 8°

0. 30161.00

0. 30161.WW

0. 30161.NN 0. 30162.NN

2x11°

0. 30162.00

0. 30162.WW

2x15°

0. 30163.00

0. 30163.WW

0. 30163.NN

2x26°

0. 30164.00

0. 30164.WW

0. 30164.NN

W. W. Mira

0. 30165.00

0. 30165.WW

0. 30165.NN

Lindro

IP66 PROJECTORS

Projector

7 1x39W 3955lm 3000K CRI 82

4295lm 4000K CRI 82

2x11°

0. 30480.WW

0. 30480.NN

2x15°

0. 30481.WW

0. 30481.NN

2x18°

0. 30482.WW

0. 30482.NN

2x20°

0. 30483.WW

0. 30483.NN

2x34°

0. 30484.WW

0. 30484.NN

7 1x39W 3955lm 3000K CRI 82

4295lm 4000K CRI 82

2x11°

0. 30180.WW

0. 30180.NN

2x15°

0. 30181.WW

0. 30181.NN

2x18°

0. 30182.WW

0. 30182.NN

2x20°

0. 30183.WW

0. 30183.NN

2x34°

0. 30184.WW

0. 30184.NN

Visit www.reggiani.net/code to access the product datasheet.

395

Lindro

IP66 PROJECTORS

Projector

Lindro Fixed projector with IOS optics, LED LUCE and control gear technology

Surface-mounted version 4x14W 111

3440lm 3000K CRI 90

300

Version: Phase cut dimming

Version: Dimmable (1-10V DC)

3980lm 3000K CRI 85

4x26W 4400lm 4000K CRI 85

2x 8°

0. 30635.HQ

0. 30635.WW

0. 30635.NN

2x12°

0. 30636.HQ

0. 30636.WW

0. 30636.NN

2x17°

0. 30637.HQ

0. 30637.WW

0. 30637.NN

2x25°

0. 30638.HQ

0. 30638.WW

0. 30638.NN

8280lm 3000K CRI 94

9632lm 3000K CRI 85

10140lm 4000K CRI 84

2x37°

0. 30639.HQ

0. 30639.WW

0. 30639.NN

W. W. Mira

0. 30640.HQ

0. 30640.WW

0. 30640.NN

2x 8°

0. 30560.HQ

0. 30560.WW

0. 30560.NN

2x10°

0. 30660.HQ

0. 30660.WW

0. 30660.NN

2x12°

0. 30561.HQ

0. 30561.WW

0. 30561.NN

2x12°

0. 30661.HQ

0. 30661.WW

0. 30661.NN

2x17°

0. 30562.HQ

0. 30562.WW

0. 30562.NN

2x17°

0. 30662.HQ

0. 30662.WW

0. 30662.NN

2x25°

0. 30563.HQ

0. 30563.WW

0. 30563.NN

2x23°

0. 30663.HQ

0. 30663.WW

0. 30663.NN

2x37°

0. 30564.HQ

0. 30564.WW

0. 30564.NN

2x35°

0. 30664.HQ

0. 30664.WW

0. 30664.NN

W. W. Mira

0. 30565.HQ

0. 30565.WW

0. 30565.NN

W. W. Mira

0. 30665.HQ

0. 30665.WW

0. 30665.NN

Lindro Fixed projector with IOS optics, LED LUCE and control gear technology

Surface-mounted version 4x14W 111

3440lm 3000K CRI 90

ø 300

Version: Phase cut dimming

Version: Dimmable (1-10V DC)

396

4x26W 3980lm 3000K CRI 85

4400lm 4000K CRI 85

2x 8°

0. 30320.HQ

0. 30320.WW

0. 30320.NN

2x12°

0. 30321.HQ

0. 30321.WW

0. 30321.NN

2x17°

0. 30322.HQ

0. 30322.WW

0. 30322.NN

2x25°

0. 30323.HQ

0. 30323.WW

0. 30323.NN

8280lm 3000K CRI 94

9632lm 3000K CRI 85

10140lm 4000K CRI 84

2x37°

0. 30324.HQ

0. 30324.WW

0. 30324.NN

W. W. Mira

0. 30325.HQ

0. 30325.WW

0. 30325.NN

2x 8°

0. 30300.HQ

0. 30300.WW

0. 30300.NN

2x10°

0. 30330.HQ

0. 30330.WW

0. 30330.NN

2x12°

0. 30301.HQ

0. 30301.WW

0. 30301.NN

2x12°

0. 30331.HQ

0. 30331.WW

0. 30331.NN

2x17°

0. 30302.HQ

0. 30302.WW

0. 30302.NN

2x17°

0. 30332.HQ

0. 30332.WW

0. 30332.NN

2x25°

0. 30303.HQ

0. 30303.WW

0. 30303.NN

2x23°

0. 30333.HQ

0. 30333.WW

0. 30333.NN

2x37°

0. 30304.HQ

0. 30304.WW

0. 30304.NN

2x35°

0. 30334.HQ

0. 30334.WW

0. 30334.NN

W. W. Mira

0. 30305.HQ

0. 30305.WW

0. 30305.NN

W. W. Mira

0. 30335.HQ

0. 30335.WW

0. 30335.NN

Lindro

IP66 PROJECTORS

Projector

Lindro Fixed projector with IOS optics, LED LUCE and control gear technology

Surface-mounted version

2x14W 111 300

Version: Phase cut dimming

Asymmetric

1720lm 3000K CRI 90

1990lm 3000K CRI 85

2200lm 4000K CRI 85

0. 30570.HQ

0. 30570.WW

0. 30570.NN

Lindro Fixed projector with IOS optics, LED LUCE and control gear technology

Surface-mounted version

2x14W 111 ø 300

Version: Phase cut dimming

Asymmetric

Visit www.reggiani.net/code to access the product datasheet.

1720lm 3000K CRI 90

1990lm 3000K CRI 85

2200lm 4000K CRI 85

0. 30310.HQ

0. 30310.WW

0. 30310.NN

397

Argiak

IP65 PROJECTORS

Fixed / adjustable projector

Design: Fabio NomeReggiani Cognome

Argiak Essential, transparent design, practical, functional and with a high degree of protection (IP65) – these are the features of this extended family of projectors with two or four optical compartments. The die-cast aluminium body accommodates the optics, which are enclosed and protected by the integral ultra-clear anti-static polycarbonate back housing. Thanks to the excellent 398

quality of the most innovative RE LED LUCE light sources and the high efﬁciency of the LL2 optics, Argiak can be used both in exteriors and in dusty and/or damp interiors (garages, cellars, porticoes, etc.) as well as anywhere a high-performance, lowmaintenance luminaire is required. Installed on walls, cornices or ceilings, Argiak comes in the ﬁxed or adjustable versions – whatever the lighting design

requires; the track-mounted version is a great choice for Hi-Tech settings.

IP65 PROJECTORS

Argiak Fixed / adjustable projector

399

Argiak

IP65 PROJECTORS

Fixed / adjustable projector STANDARD FINISHES 26 black-graphite 27 white gloss 28 metallised grey BODY The structure of the lighting body in die-cast aluminium includes efficient heat sinks for optimum heat dissipation, guaranteeing optimal operating temperature for drivers and LEDs. SAFETY SHIELD AND BACK HOUSING Anti-static metallised polycarbonate with scratch resistant protective coating. The combination of innovative materials and surface treatments ensure that this shield maintains good light emission. OPTICS IOS system (Interchangeable Optical System) A full range of beams and high efficiency (up to d 90) INSTALLATION OF TRACK-MOUNTED PROJECTORS Projectors complete with adapter for mounting on Reggiani 3-circuit track. (The compatibility of the adapter with the various 3-circuit tracks available on the market will require prior verification). INSTALLATION OF SURFACE-MOUNTED PROJECTORS Loop-in/loop-out facility with pre-wired power supply cable for cascade connection. DEGREE OF PROTECTION IP65 Track-mounted version: IP40

Safety shield and back housing made from anti-static metallised polycarbonate with scratch resistant protective coating.

ADJUSTMENT (IF ENVISAGED)

-70° +60°

-70° +50° in the vertical axis

356° 356° in the horizontal axis

356°

400

Argiak

IP65 PROJECTORS

Fixed / adjustable projector

Argiak RE LED LUCE incorporates the best high efﬁciency LEDs (up to 4295 lm, 108 lm/W) with varying tones of excellent white (3000K 4000K, CRI from 84 to 94). Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous ﬂux). Fixed surface-mounted version

Adjustable surface-mounted version

Track-mounted version

Optics

Control gear technologies For Re Led Luce 2x14W

For Re Led Luce 4x14W

IOS reflectors with Ø 80 mm (LL2) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization - exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%). The shield is clear for very narrow beams, satin for narrow, medium and wide beams and satin/prismatic for the Wall Washer Mira version. There are also versions with gold optics or with selective filters for lighting foodstuffs. High efficiency driver 85% and a power factor of nearly 1 assure real energy savings. The robustness of the control gear is assured up to Ta 70°C and Tc 90°C and guarantees a lifetime of over 50,000 h. • Non-dimmable driver (120 or 240V AC/DC). • Driver (220-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 5%. • Non-dimmable driver (220/240V). • Driver (220-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 5%.

401

Argiak

IP65 PROJECTORS

Fixed / adjustable projector

Argiak Surface-mounted projector with IOS optics, LED LUCE and control gear technology

Fixed surface-mounted version 2x14W 2x1100lm 4000K CRI 85

2x1315lm 5000K CRI 65

0. 39601.WW

0. 39601.NN

0. 39601.CC

0. 39602.WW

0. 39602.NN

0. 39602.CC

0. 39603.HQ

0. 39603.WW

0. 39603.NN

0. 39603.CC

2x15°

0. 39604.HQ

0. 39604.WW

0. 39604.NN

0. 39604.CC

2x26°

0. 39605.HQ

0. 39605.WW

0. 39605.NN

0. 39605.CC

2x 6°

0. 39611.HQ

0. 39611.WW

0. 39611.NN

0. 39611.CC

2x 8°

0. 39612.HQ

0. 39612.WW

0. 39612.NN

0. 39612.CC

2x11°

0. 39613.HQ

0. 39613.WW

0. 39613.NN

0. 39613.CC

2x15°

0. 39614.HQ

0. 39614.WW

0. 39614.NN

0. 39614.CC

2x26°

0. 39615.HQ

0. 39615.WW

0. 39615.NN

0. 39615.CC

2x1100lm 4000K CRI 85

2x1315lm 5000K CRI 65

2x860lm 3000K CRI 90

2x995lm 3000K CRI 85

2x 6°

0. 39601.HQ

2x 8°

0. 39602.HQ

2x11°

113 60 254

128

Dimmable (1-10V DC)

Adjustable surface-mounted version

60 60 254

109

128

Dimmable (1-10V DC)

Argiak Adjustable track-mounted projector with IOS optics, LED LUCE and control gear technology

For 3-circuit track 60 254

2x14W

110

128

2x860lm 3000K CRI 90

The degree of protection (IP65) refers to the projector only.

Non-dimmable

402

2x995lm 3000K CRI 85

2x 6°

0. 39621.HQ

0. 39621.WW

0. 39621.NN

0. 39621.CC

2x 8°

0. 39622.HQ

0. 39622.WW

0. 39622.NN

0. 39622.CC

2x11°

0. 39623.HQ

0. 39623.WW

0. 39623.NN

0. 39623.CC

2x15°

0. 39624.HQ

0. 39624.WW

0. 39624.NN

0. 39624.CC

2x26°

0. 39625.HQ

0. 39625.WW

0. 39625.NN

0. 39625.CC

Argiak

IP65 PROJECTORS

Fixed / adjustable projector

Argiak Surface-mounted projector with IOS optics, LED LUCE and control gear technology

Fixed surface-mounted version 4x14W 4x860lm 3000K CRI 90

4x995lm 3000K CRI 85

4x1100lm 4000K CRI 85

4x1315lm 5000K CRI 65

2x 6°

0. 39651.HQ

0. 39651.WW

0. 39651.NN

0. 39651.CC

2x 8°

0. 39652.HQ

0. 39652.WW

0. 39652.NN

0. 39652.CC

2x11°

0. 39653.HQ

0. 39653.WW

0. 39653.NN

0. 39653.CC

2x15°

0. 39654.HQ

0. 39654.WW

0. 39654.NN

0. 39654.CC

2x26°

0. 39655.HQ

0. 39655.WW

0. 39655.NN

0. 39655.CC

2x 6°

0. 39661.HQ

0. 39661.WW

0. 39661.NN

0. 39661.CC

2x 8°

0. 39662.HQ

0. 39662.WW

0. 39662.NN

0. 39662.CC

2x11°

0. 39663.HQ

0. 39663.WW

0. 39663.NN

0. 39663.CC

2x15°

0. 39664.HQ

0. 39664.WW

0. 39664.NN

0. 39664.CC

2x26°

0. 39665.HQ

0. 39665.WW

0. 39665.NN

0. 39665.CC

113 60 508

128

Dimmable (1-10V DC)

Adjustable surface-mounted version 60 60109 508

128

Dimmable (1-10V DC)

Argiak Adjustable track-mounted projector with IOS optics, LED LUCE and control gear technology

For 3-circuit track 4x14W

110 60 508

128

4x860lm 3000K CRI 90

4x995lm 3000K CRI 85

4x1100lm 4000K CRI 85

4x1315lm 5000K CRI 65

2x 6°

0. 39671.HQ

0. 39671.WW

0. 39671.NN

0. 39671.CC

2x 8°

0. 39672.HQ

0. 39672.WW

0. 39672.NN

0. 39672.CC

2x11°

0. 39673.HQ

0. 39673.WW

0. 39673.NN

0. 39673.CC

2x15°

0. 39674.HQ

0. 39674.WW

0. 39674.NN

0. 39674.CC

2x26°

0. 39675.HQ

0. 39675.WW

0. 39675.NN

0. 39675.CC

The degree of protection (IP65) refers to the projector only.

Non-dimmable

Visit www.reggiani.net/code to access the product datasheet.

403

Rios Plus / Rios / Iperios Adjustable projector

Design: Fabio Reggiani

Rios Plus EXTREME LIGHT -30째C / +60째C When the environmental conditions turn extreme and traditional luminaires show their functional limits, a new category of products that can stand up to the toughest conditions are required. RIOS Plus, together with 14W LED Luce, is the versatile luminaire that can meet the many lighting design needs in the most extreme conditions. 404

EXTERIOR LUMINAIRES

Iperios

EXTERIOR LUMINAIRES

Adjustable projector

Rios Rios is a fully adjustable exterior projector in three sizes, with a seductive goblet shape. In some versions, Rios has a long extended arm to create accent lighting, whereas the compact models can blend right into their surroundings. Small Rios is designed to light outdoor areas at short distances (simple garden beds or porticoes). Medium Rios is suitable for lighting gardens, courtyards,

Iperios pathways, porticoes as well as architecture, sculptures, monuments and facades. Large Rios guarantees excellent results in lighting tall trees, outdoor exhibitions, pathways and sizeable courtyards.

Iperios is a large outdoor projector with the overflowing power of a flooding river of light. Its light beams are capable of enhancing installations and architectonic structures of significant heights. Iperios is the larger version of Rios: they both use high performance light sources and can be fitted for the IOS System. Installation is facilitated by a quick-fit connecting module

providing both mechanical and electrical connection. The high degree of protection ( IP66) makes Iperios perfect for lighting outdoor exhibitions, architecture, obelisks, pathways and sizeable courtyards.

405

Rios Plus / Rios / Iperios

EXTERIOR LUMINAIRES

Adjustable projector STANDARD FINISHES 26 black-graphite 27 white gloss 28 metallised grey

Rios Plus

BODY Two harmonious elements in die-cast aluminium, held together by a joint that enables utmost adjustment of the luminaire, house the control gear and the optical compartment, which is fitted with a passive heat sink that exploits the thermal conductivity of the aluminium and the convection current generated by virtue of the temperature difference in the air around the heat sink, ensuring perfectly efficient and long-lasting light sources. OTTICHE IOS system (Interchangeable Optical System) A full range of beams and high efficiency (up to d 90) SHIELD Die-cast aluminium front lens cover with heat treated convex safety glass, gaskets and three stainless steel locking screws.. Iperios INSTALLATION Quick-fit connecting module with mounting bracket, separated from the base by a simple slide, easy to attach to the surface. The luminaire body can be positioned after electrical connection using the special connector supplied. INSTALLATION OF SURFACEMOUNTED LUMINAIRES Cable access from the side.

Iperios

Quick-ﬁt connecting module with mounting bracket, separated from the base by a simple slide, easy to attach to the surface. The luminaire body can be positioned after electrical connection using the special connector supplied.

ADJUSTMENT 100° in the vertical axis (adjustment with screw lock).

356° in the horizontal axis

406

EXTERIOR LUMINAIRES

Rios Plus / Rios / Iperios Adjustable projector

Rios Plus Rios Iperios RE LED LUCE incorporates the best high efﬁciency LEDs (up to 2535 lm, 80 lm/W) with varying tones of excellent white (3000K - 4000K, CRI from 84 to 94 ). Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous ﬂux).

For IOS versions with metal halide lamps.

For versions with low voltage halogen lamp with built-in reﬂector.

For IOS versions with metal halide lamps.

Optics

99.99% pure aluminium IOS reﬂectors with Ø 80 mm and twist-lock ﬁxing system for narrow, medium and wide beams.

Reﬂector incorporated in the lamp.

99.99% pure aluminium IOS reﬂectors with twist-lock ﬁxing system for narrow, medium and wide beams.

Control gear technologies

HF control gear for metal halide lamps with ceramic technology.

Electronic transformer.

HF control gear for metal halide lamps with ceramic technology.

For Re Led Luce 14W

• Non-dimmable driver (120 or 240V AC/DC).

For Re Led Luce 26W

407

Rios Plus

EXTERIOR LUMINAIRES

Adjustable projector

Rios Plus IP66 IK03 Adjustable projector with IOS optics, LED LUCE and control gear technology

Surface-mounted, compact version 1x14W ø130 860lm 3000K CRI 90

995lm 3000K CRI 85

1100lm 4000K CRI 85

2x 6°

0. 34101.HQ

0. 34101.WW

0. 34101.NN

2x 8°

0. 34102.HQ

0. 34102.WW

0. 34102.NN

2x11°

0. 34103.HQ

0. 34103.WW

0. 34103.NN

2x15°

0. 34104.HQ

0. 34104.WW

0. 34104.NN

2x26°

0. 34105.HQ

0. 34105.WW

0. 34105.NN

W. W. Mira

0. 34106.HQ

0. 34106.WW

0. 34106.NN

2x 6°

0. 34111.HQ

0. 34111.WW

0. 34111.NN

2x 8°

0. 34112.HQ

0. 34112.WW

0. 34112.NN

2x11°

0. 34113.HQ

0. 34113.WW

0. 34113.NN

2x15°

0. 34114.HQ

0. 34114.WW

0. 34114.NN

2x26°

0. 34115.HQ

0. 34115.WW

0. 34115.NN

W. W. Mira

0. 34116.HQ

0. 34116.WW

0. 34116.NN

222 ø156

Provision for luminous intensity adjustment with external phase cut dimmer.

Version: Non-dimmable

Version: Dimmable (1-10V DC)

Surface-mounted version with extended arm 630 ø 156

ø130

Provision for luminous intensity adjustment with external phase cut dimmer.

Version: Non-dimmable

Version: Dimmable (1-10V DC)

408

Rios Plus

EXTERIOR LUMINAIRES

Adjustable projector

1x26W 2070lm 3000K CRI 94

2408lm 3000K CRI 85

2535lm 4000K CRI 84

2x 6°

0. 34141.HQ

0. 34141.WW

0. 34141.NN

2x 8°

0. 34142.HQ

0. 34142.WW

0. 34142.NN

2x11°

0. 34143.HQ

0. 34143.WW

0. 34143.NN

2x15°

0. 34144.HQ

0. 34144.WW

0. 34144.NN

2x26°

0. 34145.HQ

0. 34145.WW

0. 34145.NN

W. W. Mira

0. 34146.HQ

0. 34146.WW

0. 34146.NN

2x 6°

V. 34141.HQ

V. 34141.WW

V. 34141.NN

2x 8°

V. 34142.HQ

V. 34142.WW

V. 34142.NN

2x11°

V. 34143.HQ

V. 34143.WW

V. 34143.NN

2x15°

V. 34144.HQ

V. 34144.WW

V. 34144.NN

2x26°

V. 34145.HQ

V. 34145.WW

V. 34145.NN

W. W. Mira

V. 34146.HQ

V. 34146.WW

V. 34146.NN

2x 6°

0. 34151.HQ

0. 34151.WW

0. 34151.NN

2x 8°

0. 34152.HQ

0. 34152.WW

0. 34152.NN

2x11°

0. 34153.HQ

0. 34153.WW

0. 34153.NN

2x15°

0. 34154.HQ

0. 34154.WW

0. 34154.NN

2x26°

0. 34155.HQ

0. 34155.WW

0. 34155.NN

W. W. Mira

0. 34156.HQ

0. 34156.WW

0. 34156.NN

2x 6°

V. 34151.HQ

V. 34151.WW

V. 34151.NN

2x 8°

V. 34152.HQ

V. 34152.WW

V. 34152.NN

2x11°

V. 34153.HQ

V. 34153.WW

V. 34153.NN

2x15°

V. 34154.HQ

V. 34154.WW

V. 34154.NN

2x26°

V. 34155.HQ

V. 34155.WW

V. 34155.NN

W. W. Mira

V. 34156.HQ

V. 34156.WW

V. 34156.NN

Visit www.reggiani.net/code to access the product datasheet.

409

Rios

EXTERIOR LUMINAIRES

Adjustable projector

Rios Adjustable projector for low voltage halogen lamps

Surface-mounted, compact version (IP66) 55

Surface-mounted version with extended arm (IP55) QR-CB / GU5.3

ø 86 219

163

QR-CB / GU5.3

621

ø 156 55

ø 156

ø86

1x50 Watt of the lamp

0. 13200.00

1x50 Watt of the lamp

0. 13220.00

Rios Adjustable projector with IOS optics and control gear technology for metal halide lamps

Surface-mounted, compact version (IP66) CDM-TC / G8.5 ø137 57 255

163

1x35 Watt

1x50 Watt

1x70 Watt

2x 7° /8°

0. 13241.00

0. 50220.00

0. 13244.00

2x17°

0. 13242.00

0. 50221.00

0. 13245.00

2x28°/29°

0. 13243.00

0. 50222.00

0. 13246.00

2x 7° /8°

0. 13271.00

0. 50223.00

0. 13274.00

2x17°

0. 13272.00

0. 50224.00

0. 13275.00

2x28°/29°

0. 13273.00

0. 50225.00

0. 13276.00

ø 182

Surface-mounted version with extended arm (IP55) 623

ø 182 57

ø137

Rios Adjustable projector with IOS optics and control gear technology for metal halide lamps

Surface-mounted, compact version (IP66) CDM-T / G12 ø162 57 326

269

1x35 Watt

ø 182

1x50 Watt

1x70 Watt

2x 7°

0. 13283.00

0. 50226.00

0. 13286.00

2x11°

0. 13284.00

0. 50227.00

0. 13287.00

2x25°

0. 13285.00

0. 50228.00

0. 13288.00

2x 7°

0. 13293.00

0. 50229.00

0. 13296.00

2x11°

0. 13294.00

0. 50230.00

0. 13297.00

2x25°

0. 13295.00

0. 50231.00

0. 13298.00

Surface-mounted version with extended arm (IP55) 687

ø 182 57

ø162

410

Iperios

EXTERIOR LUMINAIRES

Adjustable projector

Iperios IP66 Adjustable projector with IOS optics and control gear technology for metal halide lamps

CDM-T / G12 ø 280 500

1x20 Watt

1x35 Watt

1x50 Watt

1x70 Watt

1x100 Watt

HPF

2x 2° / 3°

0. 13516.00

0. 13513.00

0. 50244.00

0. 13523.00

0. 50247.00

0. 13533.00

0. 13530.EV

0. 13540.EV

2x14°/11°

0. 13517.00

0. 13514.00

0. 50245.00

0. 13524.00

0. 50248.00

0. 13534.00

0. 13531.EV

0. 13541.EV

2x21°/24°

0. 13518.00

0. 13515.00

0. 50246.00

0. 13525.00

0. 50249.00

0. 13535.00

0. 13532.EV

0. 13542.EV

170

ø 284

1x150 Watt

1x250 Watt

NEXT HOME and garden Shoreham, UK Visit www.reggiani.net/code to access the product datasheet.

411

Narancia 300 outdoor

EXTERIOR LUMINAIRES

Adjustable projector

Design: Fabio Reggiani

Narancia 300 outdoor Narancia 300 outdoor is the right solution if you are looking for an efﬁcient wall mounted adjustable projector with a classic, balanced design, for easy use and maintenance. It has the same qualities as the interior version with the addition of a high degree of protection (IP66), combined with all the strength of the IOS (Interchangeable Optical System) system. Narancia can elegantly ﬁt 412

into classic architecture and modern architecture. Narancia’s strength lies in its elegant but strong form, the use of the most modern HF control gear technologies, the excellent control of the light emitted and its softness. It comes in two versions: with indirect light distribution, which only directs light upwards, and with direct/ indirect light distribution,

with a dual light beam directed both downwards and upwards. Narancia with in direct light beam can be inverted when mounted to obtain direct light distribution. The adjustable optical compartment can also be locked into the most favourable position.

EXTERIOR LUMINAIRES

Narancia 300 outdoor Adjustable projector

Atrium, monumental Church of S. Gregorio Armeno - Naples, Italy 413

Narancia 300 outdoor

EXTERIOR LUMINAIRES

Adjustable projector STANDARD FINISHES 26 black-graphite 27 white gloss 28 metallised grey BODY Die-cast aluminium; structure with separate compartments for optimum heat dissipation. SHIELD Heat treated clear safety glass, flat for versions with asymmetric light distribution, convex for versions with IOS system. INSTALLATION Side-sliding mounting bracket for quick installation. INSTALLATION POSITION 0°, traditional mounting - suitable for every situation that calls for soft indirect lighting obtained when it reflects off the walls. 180°, inverted mounting for direct light (where specified). ADJUSTMENT OF THE OPTICAL COMPARTMENT Adjustable in three positions -10°/0°/20° in the vertical axis with provision for locking the luminaire in the desired position. ADJUSTMENT OF THE IOS SYSTEM -25°/ 0°/25° on the side. VERSION WITH ASYMMETRIC LIGHT DISTRIBUTION 99.9% pure aluminium reflector.

It can also be installed as direct light luminaire

Installation

414

Adjustment of the optical compartment

Adjustment of the IOS system

Shield

Narancia 300 outdoor

EXTERIOR LUMINAIRES

Adjustable projector

Narancia 300 outdoor Adjustable wall-mounted projector with indirect light distribution, IOS optics and control gear technology for metal halide lamps

CDM-TC / G8.5

10° 20° 270 200 1x20 Watt

1x35 Watt

1x50 Watt

1x70 Watt

2x 7° / 8°

0. 14750.00

0. 14753.00

0. 50250.00

0. 14757.00

2x17°

0. 14751.00

0. 14755.00

0. 50251.00

0. 14758.00

2x28°/29°

0. 14752.00

0. 14756.00

0. 50252.00

0. 14759.00

W. W. Mira

0. 14775.00

0. 14776.00

0. 50253.00

0. 14777.00

300 25°

25°

Narancia Adjustable wall-mounted projector with indirect light distribution for metal halide lamps and compact ﬂuorescent lamps

CDM-T / G12

10° 20°

TC-TE / GX24q-1

TC-TE / GX24q-2

1x13 Watt

1x18 Watt

270 171 1x35 Watt

1x70 Watt

0. 14703.00

0. 14715.00

300 asymmetric beams 2 x53°

0. 14729.00

2 x38°

Version: with stand-by halogen lamp 1x100 Watt

0. 14732.00

asymmetric beams

0. 14716.00

74,9

QT-DE/ R7s

Narancia Adjustable wall-mounted projector with direct/indirect light distribution for mains voltage halogen lamps, metal halide lamps and compact ﬂuorescent lamps

10° 20°

QT-DE / R7s

CDM-T / G12

TC-TE / GX24q-1

TC-TE / GX24q-2

270 171 300

114,2

1x200 Watt

1x35 Watt

1x70 Watt

1x13 Watt

1x18 Watt

0. 14701.00

0. 14705.00

0. 14717.00

0. 14730.00

0. 14733.00

Version: with stand-by halogen lamp 1x100 Watt

0. 14718.00 74,9

QT-DE/ R7s

Visit www.reggiani.net/code to access the product datasheet.

415

Zagara / Hibou

EXTERIOR LUMINAIRES (IP66)

Adjustable projector

Design: Fabio Reggiani

Zagara Zagara is a versatile, compact adjustable IP66rated projector, making it extraordinary for perfectly highlighting architecture and objects of all shapes and sizes, discreetly enhancing them.

416

Hibou Zagara is proposed in models with asymmetric or symmetric light distribution and is suitable for a number of applications, both indoors and outdoors. Extended brackets and arm brackets are available to light signs, billboards, facades and architectural details.

Hibou is a highly versatile, powerful, adjustable exterior luminaire with direct or indirect, symmetric or asymmetric light distribution. The design with separate compartments optimises heat dissipation of Hibou which can be used also under the toughest conditions

(IP66). The square optical compartment can be rotated for precise and discreet lighting of porticoes, church interiors and exteriors, palazzos and museums. Hibou can also be installed on cornices or under eaves.

EXTERIOR LUMINAIRES (IP66)

United Adjustable projector

Design Luigi Manzoni

United United is a compact exterior projector with symmetric or asymmetric light distribution that imitates the aesthetics of industrial luminaires, with a more reﬁned form. United is formed of a central body that rotates around a mounting bracket; its optical compartment and control gear are independent from each other and also have separate access to guarantee optimum heat dissipation. The versatility of

the light sources, the wide range of light beams and the high degree of protection (IP 66) make United suitable for ﬂexible use, including architectural-monument lighting, and functional industrial lighting. Numerous accessories such as coloured dichroic ﬁlters, Fresnel lens, barn doors and anti-glare louvre highlight the versatility of United.

GUANGZUNG OPERA HOUSE

417

Zagarà / Hibou

EXTERIOR LUMINAIRES

Adjustable projector

Zagara Adjustable projector with IOS optics and control gear technology for metal halide lamps

IP66 CDM-TC / G8.5 205

119 140

asymmetric beams

1x20 Watt

1x35 Watt

1x70 Watt

0. 12001.00

0. 12003.00

0. 12005.00

Hibou Adjustable projector with asymmetric light distribution and control gear technology for metal halide lamps

IP66 CDM-TC / G8.5

388 205x163 112

96 1x70 Watt

388 96 163

418

2x 8°

0. 14772.00

2x17°

0. 14773.00

2x29°

0. 14774.00

W. W. Mira

0. 14782.00

United

EXTERIOR LUMINAIRES

Adjustable projector

United Adjustable surface-mounted projector with asymmetric light distribution and control gear technology for double ended metal halide/sodium vapour lamps and mains voltage halogen lamps

IP66 HIT-DE / RX7s

276 230

HIT-DE / FC2

QT-DE / R7s

200

114,2

222

300

asymmetric beams

1x70 Watt

1x150 Watt

1x250 Watt

1x230 Watt

0. 05091.EV

0. 05090.EV

0. 05098.EV

0. 05095.00

United Adjustable surface-mounted projector with symmetric light distribution and control gear technology for metal halide lamps

IP66 CDM-T / G12 276 230

200 222 1x70 Watt 300

2x 7째

0. 05093.EV

2x20째

0. 05096.EV

1x150 Watt

2x10째

0. 05092.EV

2x22째

0. 05097.EV

Visit www.reggiani.net/code to access the product datasheet.

419

Janios

EXTERIOR LUMINAIRES

Adjustable projector

Design: Nome Cognome

Janios Janios, a wall-mounted projector with direct/ indirect light distribution and adjustable optics has a modern, classic and essential line that can ďŹ t into thousands of settings. Visual comfort, versatility and robustness (IP 65) make it valuable in interior and exterior lighting design.

420

Brooks Brother, United States

Janios

EXTERIOR LUMINAIRES

Adjustable projector

Janios Projector with adjustable IOS optics and control gear technology for metal halide lamps.

IP65 CDM-TC / G8.5

110

indirect 238

direct

287

1x20 Watt 150 115 95

2x7°

0. 05990.00

2x17°

0. 05991.00

2x28°

0. 05992.00

W. W. Mira

0. 05993.00

Janios Projector with adjustable optics and control gear technology for low voltage halogen lamps.

110

QR-CB / GU5.3 indirect

238

direct

287

1x20 Watt 150 115

of the lamp

0. 05975.00

Janios Projector with adjustable optics for mains voltage halogen lamps.

Projector HI-SPOT / GZ10

110

indirect 238

direct

Didascalia

287

1x35 Watt

150 115

of the lamp

0. 05976.00

Projector with frontal white LEDs HI-SPOT / GZ10 indirect

direct

110 + white LEDs integrated at the front

238

1x35 Watt

287 of the lamp

0. 05977.00

150 115 95

Visit www.reggiani.net/code to access the product datasheet.

421

Pasios

EXTERIOR LUMINAIRES

Fixed projector

Design: Fabio Reggiani

Pasios Pasios is a surface-mounted or pendant projector with an innovative fan design; it combines the attractive volume with adequate thermal equilibrium of the control gear technologies. Its exceptional control of light and high degree of protection (up to IP 66) make it suitable for diversiďŹ ed and safe indoor and outdoor use.

422

Pasios

EXTERIOR LUMINAIRES

Fixed projector

Pasios Fixed projector with IOS optics and control gear technology for metal halide lamps

Surface-mounted version (IP66) CDM-T / G12

334 231 209

2x 7°

ø161

1x20 Watt

1x35 Watt

1x50 Watt

1x70 Watt

1x100 Watt

0. 14831.00

0. 14836.00

0. 50254.00

1x150 Watt HPF

0. 14841.00

0. 50258.00

0. 14846.EV 0. 14847.EV

2x11°

0. 14832.00

0. 14837.00

0. 50255.00

0. 14842.00

0. 50259.00

2x25°/24°

0. 14833.00

0. 14838.00

0. 50256.00

0. 14843.00

0. 50260.00

0. 14848.EV

W. W. Mira

0. 14834.00

0. 14839.00

0. 50257.00

0. 14844.00

0. 50261.00

0. 14849.EV

2x 7°

0. 14886.00

0. 14891.00

0. 50262.00

0. 14896.00

0. 50266.00

0. 14901.EV

2x11°

0. 14887.00

0. 14892.00

0. 50263.00

0. 14897.00

0. 50267.00

0. 14902.EV

2x25°/24°

0. 14888.00

0. 14893.00

0. 50264.00

0. 14898.00

0. 50268.00

0. 14903.EV

W. W. Mira

0. 14889.00

0. 14894.00

0. 50265.00

0. 14899.00

0. 50269.00

0. 14904.EV

Pendant (IP64)

ø190

3000

234 334

209

Pasios can be enriched by an optional bright diffuser formed of a metal structure and sixteen coloured or transparent polycarbonate segments to enhance and restyle the essential design of the projector. The technology used in LEDs is progressing so rapidly that their efﬁciency is constantly improving. The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated speciﬁcations.

Visit www.reggiani.net/code to access the product datasheet.

423

Cyl light

EXTERIOR LUMINAIRES

Fixed projector

Design: Fabio Reggiani

Cyl Light Cyl light is a surface mounted ďŹ xed projector with symmetric or asymmetric light distribution and a high degree of protection (IP 67). Its neutral and meticulously clean lines make it compatible with any architectural style. The body, with built-in control gear, consists of an elegant cylinder. A special mounting bracket makes it possible to install two Cyl Light luminaires together, one 424

directed downwards and the other upwards for prominent lighting of buildings and architecture.

EXTERIOR LUMINAIRES

Cyl light Fixed projector

C.A.M. - Monza, Italy

425

Cyl light

EXTERIOR LUMINAIRES

Fixed projector STANDARD FINISHES 26 black-graphite 27 white gloss 28 metallised grey BODY Polyester powder coated steel or extruded aluminium. SHIELD Die-cast aluminium lens cover complete with sealing gasket and convex, heat treated, moulded and tempered safety glass. OPTICS IOS system (Interchangeable Optical System) Instant interchangeability, a full range of beams and high efficiency (up to d 90). REFLECTOR High specularity, 99.9% pure aluminium reflector for compact fluorescent lamps. INSTALLATION Quick-fit connecting module providing both mechanical and electrical connection. DEGREE OF PROTECTION IP66/67 SIZES Cyl light comes in three sizes: Ø 180 mm Ø 240 mm Ø 260 mm

Lens cover complete with sealing gasket and convex, moulded and tempered safety glass (in the IOS version).

Anti-glare louvre for utmost visual comfort

WALL MOUNTING Mounting bracket for one or two luminaires. This accessory is suited to highlighting architectural structures, and makes the product especially ﬂexible.

426

Cyl light

EXTERIOR LUMINAIRES

Fixed projector

Cyl light

Optics

Control gear technologies

For IOS versions with metal halide lamps.

For versions with double-ended metal halide/sodium vapour lamps.

For versions with compact ﬂuorescent lamps.

99.99% pure aluminium IOS reﬂectors with Ø 130 mm and twist-lock ﬁxing system.

99.9% pure anodised aluminium reﬂector.

High specularity, 99.9% pure aluminium reﬂector or reﬂector made from metallised polycarbonate with antiscratch protection

HF control gear for 20 W lamps and HPF control gear for 35/70/150 W lamps.

Low-loss HPF control gear (with superimposed ignitor, power supply with thermal circuit breaker and power factor correction capacitor, cosf 0.9).

HF EEI=A1/A2 HPF EEI =A2/A3 and power factor correction capacitor (cosf 0.9)

427

Cyl light Slim

EXTERIOR LUMINAIRES

Fixed projector

Cyl light Slim Fixed projector with IOS optics and control gear technology for metal halide lamps

IP66 CDM-T / G12 263 ø 180

1x20 Watt

1x35 Watt

1x70 Watt

1x150 Watt

2x 7°

0. 05241.00

0. 05246.EV

0. 05251.EV

0. 05256.EV

2x11°

0. 05242.00

0. 05247.EV

0. 05252.EV

0. 05257.EV

2x25°/24°

0. 05243.00

0. 05248.EV

0. 05253.EV

0. 05258.EV

Cyl light Slim Fixed projector with control gear technology for compact ﬂuorescent lamps TC-TE / GX24q-2

TC-TE / GX24q-3

1x18 Watt

1x26 Watt - 1x32 Watt

263 ø 180 2x48° 2x52°/55°

428

0. 05260.00 0. 05261.00

Cyl light

EXTERIOR LUMINAIRES

Fixed projector

Cyl light Fixed projector with symmetric light distribution and control gear technology for metal halide lamps and compact ﬂuorescent lamps

IP67 CDM-T / G12

TC-D / G24d-3

287 ø 240

1x70 Watt

1x150 Watt

2x50°

0. 06060.EV

2x13°

0. 06070.EV

2x44°

0. 06061.EV

2x15°

0. 06071.EV

2x50°

2x26 Watt

0. 06085.EV

Cyl light Fixed projector with asymmetric light distribution and control gear technology for metal halide lamps and compact ﬂuorescent lamps

HIT-DE / RX7s

TC-D / G24d-3

287 ø 240 asymmetric beams

1x70 Watt

1x150 Watt

1x26 Watt

0. 06080.EV

0. 06081.EV

0. 06083.EV

Cyl light Fixed projector with symmetric light distribution and control gear technology for metal halide lamps

IP55 HIT-DE / RX7s 285 ø 260

1x70 Watt 2x41° 2x44°

Visit www.reggiani.net/code to access the product datasheet.

1x150 Watt

0. 07605.EV 0. 07606.EV

429

Flure

RECESSED LUMINAIRES

Modular lighting system

Flure Flure is a modular lighting system with a minimal and pure design and comes in the following conďŹ gurations: exterior surface mounted, pendant and recessed, also walk-over and drive-over, in four different lengths. Its aluminium body with bezel and AISI 316 Marine-grade stainless steel details, its high degree of protection (IP67 â&#x20AC;&#x201C; recessed Flure, IP66 the other models) and its robustness make it possible 430

to use Flure in the toughest environmental conditions. The ground recessed version comes with both symmetric and asymmetric light beam, whereas the wall and ceiling mounted versions have symmetric beam.

RECESSED LUMINAIRES

Flure Modular lighting system

Road of Freedom

431

Flure

RECESSED LUMINAIRES

Modular lighting system SURFACE MOUNTED LUMINAIRES IP 66 STANDARD FINISH 28 metallised grey BODY AND BACK HOUSING Die-cast aluminium and screws in steel. REFLECTOR 99.9% pure aluminium. SHIELD Heat treated clear safety glass. BUILT-IN CONTROL GEAR TECHNOLOGIES Low loss HF dual power control gear, cosf = 0.9 (for connection to mains power).

WALL MOUNTED

ACCESSORIES Coloured ﬁlters, anti-glare louvre, barn doors.

FIXED

ADJUSTABLE

ADJUSTMENT Wall mounted versions: ﬁxed and adjustable. • Fixed: indirect or direct light distribution • Adjustable: indirect or direct light distribution with the possibility of 90° rotation using the retaining bracket.

Fixed, wall mounted versions that can be mounted with direct or indirect light distribution, and adjustable versions with the possibility of rotating the body to 90°.

DRIVE-OVER RECESSED LUMINAIRES (IP67) STANDARD FINISH 00 stainless steel BODY AND BACK HOUSING Die-cast aluminium.

DRIVE-OVER RECESSED LUMINAIRE

BEZEL AND SCREWS AISI 316 Marine-grade stainless steel. REFLECTOR 99.9% pure aluminium.

SYMMETRIC LIGHT

SHIELD Heat treated clear safety glass. CONTROL GEAR Built-in low loss HF control gear, cosf = 0.9 (for connection to mains power). ACCESSORIES Coloured ﬁlters, anti-glare louvre, barn doors.

ASYMMETRIC LIGHT

432

Flure

RECESSED LUMINAIRES

Modular lighting system

Flure Adjustable wall mounted luminaire with symmetric light distribution and control gear technology for ﬂuorescent lamps

Fixed wall mounted luminaire with symmetric light distribution and control gear technology for ﬂuorescent lamps Fixed

Adjustable 167,7

116 85

IP66 IK07

85 625

T5 / FH

T5 / FQ

1x14 Watt

1x24 Watt

T5 / FH

T5 / FQ

1x14 Watt

1x24 Watt

625

0. 12520.00

1x21 Watt

0. 12530.00

1x39 Watt

1x21 Watt

1x39 Watt

85 925

925 0. 12522.00 1x28 Watt

0. 12532.00

1x54 Watt

1x28 Watt

1x54 Watt

1225

Version: for permanent illumination when used as emergency lighting 1x35 Watt

0. 12524.00

0. 12534.00

0. 12525.00

0. 12535.00

1x49 Watt 1x80 Watt

1x35 Watt

1x49 Watt 1x80 Watt

1525

Version: for permanent illumination when used as emergency lighting

0. 12526.00

0. 12536.00

0. 12527.00

0. 12537.00

Flure Fixed ground recessed DRIVE-OVER luminaire with symmetric/asymmetric light distribution and control gear technology for ﬂuorescent lamps Symmetric

IP67

KG 2000

Asymmetric

IK08/IK10

100

100 T5 / FH

662 640 71,5 100 90

1x14 Watt Symmetric

Asymmetric

0. 12500.00

0. 12495.00

962 940

1x21 Watt 71,5 100 90

0. 12501.00

1262 1240

0. 12496.00

1x28 Watt 71,5 100 90

0. 12502.00

1562 1540

0. 12497.00

1x35 Watt 71,5 100

0. 12503.00

0. 12498.00

90 The technology used in LEDs is progressing so rapidly that their efﬁciency is constantly improving. The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated speciﬁcations.

Visit www.reggiani.net/code to access the product datasheet.

Hillock / Murale

EXTERIOR LUMINAIRES

Fixed ceiling-mounted luminaire / Recessed luminaire

Design: Fabio Reggiani

HILLOCK

MURALE

Hillock - Murale Hillock can be used to light outdoor pathways in gardens or indoor stairways and halls in shopping centres, stores, hotels and restaurants without distinction. The version for mains voltage halogen lamps is also suitable for home use, as well as in areas where dimming is required (cinemas and theatres, conference rooms, relaxations zones in wellness centres). 434

The version for metal halide lamps is extensively used in cantilever roofs, fuel stations, building or hotel lobbies, shopping arcades, stadiums, gyms, railway stations and airports. Exterior luminaire for compact ďŹ&#x201A;uorescent lamps, Murale comes in the recessed versions, with or without anti-glare louvre.

IP55

EXTERIOR LUMINAIRES

Adjustable projector

Design: Carlo Vietri

IP55 IP55 is a versatile adjustable projector, with or without extended arm that provides valuable outdoor accent lighting for swimming pools, spas, wellness centres, facades, gardens and pathways. Proposed with halogen lamps with dichroic reďŹ&#x201A;ector, IP55 owes its name to its degree of protection.

Bobadilla Center Vittorio Veneto, Italy 435

Hillock - Murale

EXTERIOR LUMINAIRES

Ceiling-mounted luminaire / Recessed luminaire

Hillock Ceiling-mounted luminaire with control gear technology for compact ﬂuorescent lamps, double-ended metal halide lamps and mains voltage halogen lamps

IP55 TC-L / 2G11

TC-TE / GX24q-4

HIT-DE / RX7s

QT-DE / R7s 114,2

102 ø 350

2x18 Watt 2x44° 2x40°

1x42 Watt

1x70 Watt

1x150 Watt

1x200 Watt

0. 07881.00 0. 07882.00

2x 7°

0. 07886.EV

2x30°

0. 07890.EV

2x 9°

0. 07887.EV

2x31°

0. 07891.EV

2x15°

0. 07888.00

2x36°

0. 07892.00

2x40°

0. 07883.00

Version for permanent illumination when used as emergency lighting

Murale Fixed recessed luminaire with asymmetric light distribution and control gear technology for compact ﬂuorescent lamps

Recessed version (IP54) TC / G23

103 283

1x11 Watt

asymmetric beam

0. 06112.EV

asymmetric beam

0. 06135.EV

Recessed version with louvre 103 283

436

IP55

EXTERIOR LUMINAIRES

Proiettore orientabile

IP55 Compact projector with transformer for low voltage halogen lamps with built-in dichroic reﬂector

QR-CB / GU5.3 196 145 x 90

128 1x20/35/50 Watt - 12V

0. 06101.EV

IP55 Adjustable projector for low voltage halogen lamps with built-in dichroic reﬂector

QR-CB / GU5.3 196 128

ø66

1x20/35/50 Watt - 12V

0. 06102.00

IP55 Projector with extended arm and transformer for low voltage halogen lamps with built-in dichroic reﬂector

QR-CB / GU5.3 196 145 x 90

128 70

1x20/35/50 Watt - 12V 0. 06103.EV

Visit www.reggiani.net/code to access the product datasheet.

437

Metamorphosi

RECESSED LUMINAIRES (IP67)

Ground recessed luminaire

Design: Fabio Reggiani

Metamorphosi The Metamorphosi ground recessed luminaires, ﬁxed or with tilting optics, trace evocative pathways and meandering curves of light in outdoor areas like gardens and monuments, their natural lines making them great for general or accent lighting in contexts that require high degree of protection (IP67). Also made from noble metals (AISI 316 Marine-

438

grade stainless steel or solid bronze), they give the outdoor or indoor setting a classic and reﬁned ambience. Some versions of the Metamorphosi ground

recessed luminaires, ﬁxed or fully adjustable, with symmetric or asymmetric light distribution also integrate the IOS system and RE LED Luce (3W).

RECESSED LUMINAIRES (IP67)

Metamorphosi Ground recessed luminaire

Dives in Misericordia church. Architect Richard Meier - Rome, Italy 439

Metamorphosi

RECESSED LUMINAIRES (IP67)

Ground recessed luminaire STANDARD FINISHES 00 stainless steel 03 solid bronze 16 AISI 316 Marine-grade stainless steel 28 metallised grey METAMORPHOSI IOS Ø 294 BODY • For finish 16: body, bezel and screws in AISI 316 Marine-grade stainless steel; • for finish 28: body and bezel in diecast aluminium; • for finish 00: body in die-cast aluminium and bezel in stainless steel; • for finish 03: body and bezel in solid bronze. OTTICHE IOS system (Interchangeable Optical System) Instant interchangeability, a full range of beams and high efficiency (up to d 90). ADJUSTMENT 30° in the vertical axis 360° in the horizontal axis INSTALLATION In-ground installation through the recessing box supplied. Loop-in/ loop-out facility with pre-wired power supply cable for cascade connection. DEGREE OF PROTECTION IP67

Body, bezel and screws in AISI 316 Marine-grade stainless steel (for ﬁnish 16)

Temperature on the glass: 75° (see speciﬁcations for each item)

Max static load 2000 kg

30°

30° 360° Tempered clear safety glass

IOS

PVC recessing box for in-ground installation

Loop-in/loop-out facility for cascade connection Detached control gear for optimum heat dissipation

440

Metamorphosi

RECESSED LUMINAIRES (IP67)

Ground recessed luminaire Metarmorphosi

RE LED LUCE incorporates the best high efﬁciency LEDs (85 lm/W) with varying tones of excellent white (3000K - 4000K, CRI 85). Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous ﬂux).

For versions with low voltage halogen lamps, mains voltage halogen lamps and compact ﬂuorescent lamps.

Ø 74

Ø 142

Optics

Control gear technologies

High efﬁciency driver 85%. The robustness of the control gear is assured up to Ta 70°C and Tc 90°C and guarantees a lifetime of over 50,000 h.

For Re Led Luce 3W

For halogen lamps with built-in reﬂector.

For IOS versions with metal halide lamps and halogen lamps.

Ø 294

For versions with metal halide lamps, low voltage halogen lamps, mains voltage halogen lamps and compact ﬂuorescent lamps.

Ø 294

For versions with metal halide lamps and compact ﬂuorescent lamps.

Ø 410

99.99% pure aluminium IOS reflector with Ø 80 mm, twist-lock fixing system and tempered safety glass (clear for narrow beams, microsphere for medium and wide beams, prismatic for the Wall Washer Mira version). There are also versions with gold optics and colored dichroic filters. HF control gear for metal halide lamps with ceramic technology.

HF control gear for metal halide lamps with ceramic technology.

• Driver (120 or 240V AC/DC).

441

Metamorphosi

RECESSED LUMINAIRES (IP67)

Ground recessed luminaire

Metamorphosi Ground recessed luminaire with IOS optics, LED LUCE and control gear technology

IP67

KG 500 1x3W ø 74 180lm 3000K CRI 85

ø 65

197lm 4000K CRI 85

2x 7°

0. 05880.WW

0. 05880.NN

2x14°

0. 05881.WW

0. 05881.NN

2x24°

0. 05882.WW

0. 05882.NN

Metamorphosi Ground recessed luminaire with tilting optics for low voltage halogen lamps and mains voltage halogen lamps

IP67

KG 1500 QR-CB / GU5.3

HI-SPOT / GZ10

QR-CB / GU5.3

1x20 Watt

1x50 Watt

1x20 Watt Built-in transformer

0. 06091.00

0. 06093.00

0. 06092.EV

Metamorphosi Ground recessed luminaire with control gear technology for compact ﬂuorescent lamps

IP67

KG 1500 TE-DE / G24q-1

1x10 Watt 0. 06086.00

442

Metamorphosi

RECESSED LUMINAIRES (IP67)

Ground recessed luminaire

Metamorphosi Adjustable ground recessed luminaire with IOS optics and control gear technology for metal halide lamps and mains voltage halogen lamps

IP67

KG 2000 CDM-T / G12

QT-14 / G9

1x20 Watt

1x35 Watt

1x50 Watt

1x70 Watt

1x100 Watt

1x150 Watt

1x60 Watt

2x 7°

0. 05817.00

0. 05821.00

0. 50290.00

0. 05826.00

0. 50294.00

0. 05831.00

0. 05836.00

2x11°

0. 05818.00

0. 05822.00

0. 50291.00

0. 05827.00

0. 50295.00

0. 05832.00

0. 05837.00

2x14°

0. 05824.00

0. 05829.00

0. 50292.00

0. 05834.00

0. 50296.00

0. 05839.00

0. 05842.00

2x25°/24°

0. 05819.00

0. 05823.00

0. 50293.00

0. 05828.00

0. 50297.00

0. 05833.00

0. 05838.00

Metamorphosi Ground recessed luminaire with fully adjustable optics and control gear technology for mains voltage halogen lamps

IP67

KG 2000 QR-111 / G23

1x65 Watt - 12V 0. 05843.EV

Metamorphosi Fixed ground recessed luminaire with symmetric light distribution and control gear technology for metal halide lamps

IP67

KG 2000 CDM-T / G12

1x20 Watt

1x35 Watt

1x70 Watt

2x 5°

0. 05918.00

0. 05920.EV

0. 05922.EV

2x16°

0. 05919.00

0. 05921.EV

0. 05923.EV

1x150 Watt

2x 6°

0. 05924.EV

2x17°

0. 05925.EV

Visit www.reggiani.net/code to access the product datasheet.

443

Metamorphosi

RECESSED LUMINAIRES (IP67)

Ground recessed luminaire

Metamorphosi Fixed ground recessed luminaire with asymmetric light distribution and control gear technology for metal halide and sodium vapour lamps

IP67

KG 2000 HIT-DE / RX7s

fasci asimmetrici

1x70 Watt

1x150 Watt

0. 05928.EV

0. 05929.EV

Metamorphosi Fixed ground recessed DRIVE-OVER luminaire with asymmetric light distribution and control gear technology for compact ﬂuorescent lamps

IP67

KG 2000 TC-D / G24d-3

1x26 Watt

asymmetric beams

0. 05840.EV

Metamorphosi Fixed ground recessed DRIVE-OVER luminaire with symmetric light distribution and control gear technology for compact ﬂuorescent lamps

IP67

KG 2000 TC-T / GX24d-3

1x26 Watt 2x30°

444

0. 05841.EV

Metamorphosi

RECESSED LUMINAIRES (IP67)

Ground recessed luminaire

Metamorphosi Fixed ground recessed DRIVE-OVER luminaire with control gear technology for compact ﬂuorescent lamps

IP67

KG 2000 TC-L / 2G11

TC-TE / GX24q-4

2x18 Watt

1x42 Watt

ø 410 100 Finitura 28

Finitura 00 2x18°

0. 05870.00

2x54°

0. 05871.00

Metamorphosi Fixed ground recessed luminaire with asymmetric light distribution and control gear technology for metal halide lamps

IP67

KG 2000 HIT-DE / RX7s

ø 410 100 Finish 28

1x70 Watt

1x150 Watt

0. 05875.EV

0. 05877.EV

Finish 00 asymmetric beams

Visit www.reggiani.net/code to access the product datasheet.

445

Ofu

RECESSED LUMINAIRES

Fixed recessed luminaire

Design: Álvaro Fabio Reggiani Siza

Ofu Ofu is a luminaire with an unmistakeable and original shape designed by the great Portuguese architect Álvaro Siza. Ofu has a high degree of protection (up to IP 67), so it can be used in even the toughest outdoor situations. A die-cast aluminium body protects and hides the control gear, and is surmounted by an opal or transparent methacrylate diffuser that emits a soft light. 446

The luminaire can be ﬁtted with compact ﬂuorescent lamps, metal halide lamps and RGB LEDs.

RECESSED LUMINAIRES

Ofu Fixed recessed luminaire

447

Ofu

RECESSED LUMINAIRES

Fixed recessed luminaire

Ofu Ground recessed luminaire with control gear technology for metal halide and compact ﬂuorescent lamps

IP67 7 CDM-T / G12

TC-TE / GX24q-3

650 ø 294 300

1x35 Watt

1x70 Watt

1x150 Watt

1x26 Watt

1x32 Watt

0. 12110.EV

0. 12111.EV

0. 12112.EV

0. 12113.EV

0. 12114.EV

ø333

Ofu Ground recessed luminaire with control gear technology for COLOUR CHANGING LED module

LED 650 ø 294 300

14,4 Watt

ø333 0. 12115.EV

448

Visit www.reggiani.net/code to access the product datasheet.

RECESSED LUMINAIRES

Ofu Fixed recessed luminaire

449

450

CATALOGUE 2012

LIGHT SOURCES

448

INSTALLATION NOTES

452

GENERAL INFORMATION

454

FRAMING PROJECTORS

462

NUMERICAL INDEX

QUALITY CERTIFICATIONS

464

451

LIGHT SOURCES

Abbr. MT (CDM-TM)

Description METAL HALIDE

MT (CDM-TC)

CDM-T MASTER COLOUR

Watt 20 35 50

Beam width

Lampholder GU6.5 GU6.5 GU6.5

Col. temp (k) 3000 3000 3000

Lumen Im 1800 3300 5200

20 35 70

G8.5 G8.5 G8.5

3000 3000 3000

1700 3300 6600

35 50 70

G8.5 G8.5 G8.5

3000 3000 3000

4000 5400 7800

HQI T (Osram) HQI T (Osram) HQI T (Osram) HQI T (Osram)

70 70 150 150

G12 G12 G12 G12

3000 4200 3000 4200

5200 5500 13000 13000

HCI T (Osram) HCI T (Osram) HCI T (Osram) HCI T (Osram) HCI T (Osram) HCI T (Osram)

35 35 70 70 150 150

G12 G12 G12 G12 G12 G12

3000 4200 3000 4200 3000 4200

3400 3300 6600 6600 14000 12700

CDM-T (Philips) CDM-T (Philips) CDM-T (Philips) CDM-T (Philips) CDM-T (Philips)

35 70 70 150 150

G12 G12 G12 G12 G12

3000 3000 4200 3000 4200

3400 6600 6400 14000 12700

CDM-T (Philips) Elite CDM-T (Philips) Elite CDM-T (Philips) Elite CDM-T (Philips) Elite CDM-T (Philips) Elite

35 50 70 100 150

G12 G12 G12 G12 G12

3000 3000 3000 3000 3000

4000 5400 7800 11000 15000

HQI TS HQI TS HQI TS HQI TS HQI TS HQI TS HQI TS HQI TS HQI TS HQI TS HQI TS

70 70 70 150 150 150 250 250 250 400 400

RX7s RX7s RX7s RX7s RX7s RX7s FC2 FC2 FC2 FC2 FC2

3000 4200 5200 3000 4200 5200 3000 4200 5200 4200 5400

5000 5000 5000 11000 11250 11000 20000 20000 20000 35000 36000

METAL HALIDE DOUBLE ENDED CERAMIC TECHNOLOGY HCI TS (Osram) HCI TS (Osram) HCI TS (Osram) HCI TS (Osram)

70 70 150 150

RX7s RX7s RX7s RX7s

3000 4200 3000 4200

6300 5800 13500 12000

METAL HALIDE DOUBLE ENDED CERAMIC TECHNOLOGY CDM-TD (Philips) CDM-TD (Philips) CDM-TD (Philips) CDM-TD (Philips) CMH TD (G.E.) CMH TD (G.E.)

70 70 150 150 70 150

RX7s RX7s RX7s RX7s RX7s RX7s

3000 4200 3000 4200 3000 3000

6100 5800 12500 12000 6400 12500

75 75 100 100 150 150 70 70

E27 E27 E27 E27 E27 E27 E27 E27

3200 3200 3200 3200 3200 3200 3200 4000

5500 5000 8500 8000 13000 12500 5200 5500

METAL HALIDE SINGLE ENDED ELITE

MT (HIT)

CDM-T MASTER COLOUR

MASTER COLOUR, CERAMIC TECHNOLOGY

MD (HIT-DE)

METAL HALIDE DOUBLE ENDED

MC ME (HIE)

METAL HALIDE ELLIPTICAL METALARC

TRASPARENTE MATT TRASPARENTE MATT TRASPARENTE MATT TRASPARENTE MATT

MT (CDM-TT)

METAL HALIDE SINGLE ENDED

150

E40

3000

13500

MT (HIT)

METAL HALIDE SINGLE ENDED

250 POWERBALL HCI T (Osram) 250 400 400

E40 E40 E40 E40

5400 3000 5400 3800

20000 25000 32000* 40000*

MR (HIR PAR)

METAL HALIDE WITH INTEGRAL REFLECTOR

CDM R PAR 20 CDM R PAR 20 CDM R PAR 30L CDM R PAR 30L CDM R PAR 30L CDM R PAR 30L

CDMR MINI

CDM R 111

35 35 35 35 70 70

2 x 5° 2 x15° 2 x 5° 2 x15° 2 x 5° 2 x20°

E27 E27 E27 E27 E27 E27

3000 3000 3000 3000 3000 3000

2300 2300 2400 2400 4100 4100

METAL HALIDE WITH INTEGRAL REFLECTOR

35 35 35

2 x 5° 2 x12,5° 2 x20°

GX10 GX10 GX10

3000 3000 3000

METAL HALIDE (ALUMINIUM REFLECTOR)

50 50 50

2 x12,5° 2 x20° 2 x30°

GX10 GX10 GX10

3000 3000 3000

LAMP DATA SHOWN IN THIS CATALOGUE ARE NOT BINDING, PLEASE REFER TO LAMP MANUFACTURER DATA FOR EXACT CONFIRMATION. BEFORE PROCEEDING TO ANY INSTALLATION, ALWAYS CHECK SUITABILITY OF THE LAMP FOR THE DESIRED APPLICATION. REGGIANI SPA ILLUMINAZIONE RESERVES THE RIGHTS TO TAKE INTO CONSIDERATION THE ORDER FOR LAMPS IN RELATION TO THE CUSTOMER’S REQUIRED QUANTITY AND TO THE MINIMUM PURCHASE LOT OF GOODS FIXED BY THE LAMP MANUFACTURERS.

452

LIGHT SOURCES

Abbr. FSD (TC)

Description COMPACT FLUORESCENT (2 PIN)

Watt 9 9 11 11 11

FSD (TC-E)

COMPACT FLUORESCENT (4PIN)

TC-L

Lampholder G23 G23 G23 G23 G23

Col. temp (k) 2700 2700 2700 3500 4000

Lumen Im 600 600 900 900 900

7 11

2G7 2G7

2700 2700

400 900

COMPACT FLUORESCENT

18 18 18 55

2G11 2G11 2G11 2G11

4000 3000 2700

1200 1200 1200

FSQ (TC-D)

COMPACT FLUORESCENT (2 PIN)

10 10 13 13 13 13 18 18 18 18 26 26 26 26

G24d-1 G24d-1 G24d-1 G24d-1 G24d-1 G24d-1 G24d-2 G24d-2 G24d-2 G24d-2 G24d-3 G24d-3 G24d-3 G24d-3

2700 4000 2700 3000 3500 4000 2700 3000 3500 4000 2700 3000 3500 4000

600 600 900 900 900 900 1200 1200 1200 1200 1800 1800 1800 1800

FSM (TC-T)

COMPACT FLUORESCENT (2 PIN)

18 18 26 26

GX24d-2 GX24d-2 GX24d-3 GX24d-3

2700 4000 2700 4000

1200 1200 1800 1800

FSQ (TC-DE)

COMPACT FLUORESCENT (4 PIN)

10 10 13 13 13 13 18 18 18 18 26 26 26 26

G24q-1 G24q-1 G24q-1 G24q-1 G24q-1 G24q-1 G24q-2 G24q-2 G24q-2 G24q-2 G24q-3 G24q-3 G24q-3 G24q-3

2700 4000 2700 3000 3500 4000 2700 3000 3500 4000 2700 3000 3500 4000

600 600 900 900 900 900 1200 1200 1200 1200 1800 1800 1800 1800

FSMH (TC-TE)

COMPACT FLUORESCENT (4 PIN)

13 13 18 18 26 26 32 32 32 32 42 42 42 42 57 57

GX24q-1 GX24q-1 GX24q-2 GX24q-2 GX24q-3 GX24q-3 GX24q-3 GX24q-3 GX24q-3 GX24q-3 GX24q-4 GX24q-4 GX24q-4 GX24q-4 GX24q-5 GX24q-5

4000 2700 2700 4000 2700 4000 4000 3500 3000 2700 4000 3500 3000 2700 4000 3000

900 900 1200 1800 1200 1800 2400 2400 2400 2400 3200 3200 3200 3200 4300 4300

14 14 21 21 28 28 35 35 24 24 39 39 49 49 49 54 54 54 80 80 80

G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5

4000 2700 4000 2700 4000 2700 4000 2700 4000 2700 4000 2700 4000 3000 2700 4000 3000 2700 4000 3000 2700

1200 1200 1900 1900 2600 2600 3300 3300 1750 1750 3100 3100 4300 4300 4300 4450 4450 4450 6150 6150 6150

LINEAR FLUORESCENT T5 FH

LINEAR FLUORESCENT T5 FQ

549mm 549mm 849mm 849mm 1149mm 1149mm 1149mm 1149mm 549mm 549mm 849mm 849mm 1449mm 1449mm 1449mm 1449mm 1449mm 1449mm 1449mm 1449mm 1449mm

Beam width

453

LIGHT SOURCES

Abbr. Description HRG (QR-CB 35) QUARTZ LAMP COOL-BEAM Ø 35 mm

Watt 20 20 35 35

HRG (QR-CB 51) QUARTZ LAMP COOL-BEAM Ø 50 mm

20 20 20 35 35 35 35 50 50 50 50

HIG (QR-70)

HALOSPOT 12V

HIG (QR-111)

HSG (QT)

Beam width 2 x 5° 2 x19° 2 x 5° 2 x19°

Lampholder GU4 GU4 GU4 GU4

Col. temp (k) 3100 3100 3100 3100

Lumen Im

2 x 6° 2 x18° 2 x30° 2 x 4° 2 x 9° 2 x19° 2 x30° 2 x 6° 2 x12° 2 x19° 2 x30°

GU5,3 GU5,3 GU5,3 GU5,3 GU5,3 GU5,3 GU5,3 GU5,3 GU5,3 GU5,3 GU5,3

3100 3100 3100 3100 3100 3100 3100 3100 3100 3100 3100

50 50

2 x 4° 2 x12°

BA15d BA15d

3000 3000

HALOSPOT 12V

50 50 50

2 x 2° 2 x 4° 2 x12°

G53 G53 G53

3000 3000 3000

MASTERLINE 111

30 45 45 60 60 60

2 x12° 2 x12° 2 x22,5° 2 x 4° 2 x12° 2 x22,5°

G53 G53 G53 G53 G53 G53

3000 3000 3000 3000 3000 3000

QUARTZ TUBULAR 12V

20 50 90

G4 GY 6,35 GY 6,35

3000 3000 3000

350 1000 1900

MAINS VOLTAGE HALOGEN LAMPS

25 75

G9 G9

2900 2900

250 1050

454

LIGHT SOURCES

Abbr. HRGI

Description HI SPOT

Watt 50 50

HEGPAR (D)

PAR 20

50 50

PAR 30

HEGPAR

Beam width 2 x12,5° 2 x25°

Lampholder GU10 GU10

Col. temp (k) 2700 2700

2 x 5° 2 x15°

E27 E27

2900 2900

75 75 100 100

2 x 5° 2 x15° 2 x 5° 2 x10°

E27 E27 E27 E27

2900 2900 2900 2900

PAR 38

75 75 120 120

2 x 5° 2 x15° 2 x 6° 2 x15°

E27 E27 E27 E27

3100 3100 3100 3100

HSG (QT)

HALOGEN LAMPS QT 32

70 100 150 205

E27 E27 E27 E27

2900 2900 2900 2900

HDG (QT-DE)

QUARTZ TUBULAR 74,9 mm

120

2950

2300

QUARTZ TUBULAR 114,2 mm

150 200 230

R7s R7s R7s

3000 3000 3000

R7s

Lumen Im

1180 1800 2870 4200

2200 3200 5000

455

INSTALLATION NOTES

INSTALLATION OF “TRIMLESS” LUMINAIRES The spotlight support is ﬁtted into the plasterboard false ceiling (thickness 9-12.5-15mm) and plaster is smoothed around the hole.

9 mm

12,5 mm

15 mm

The side tabs need to be eliminated for the support to be ﬁtted into the 15mm thick false ceiling

Cut out hole, size required

Fit support

Fix support with self tapping screws

Plaster

Smooth

Paint

Fit luminaire body into ceiling cut-out

Apply IOS reﬂector

456

INSTALLATION NOTES

INSTALLATION OF LUMINAIRES “WITH BEZEL” The bezel is placed over the hole in the false ceiling, then ﬁxed using the innovative ClikFix retainer device.

Cut out hole, size required

Place bezel over hole

View from ceiling void

Push down on ClikFix retainer device until it clicks

Fit luminaire body into ceiling cut-out

Apply IOS reﬂector

Remove IOS reﬂector

Remove luminaire

Install bezel

To remove the bezel, twist the ClikFix retainer device upwards using a screwdriver or other suitable tool inserted between spring clip and support pin

457

GENERAL INFORMATION FOR DOWNLIGHTS

CONTAINER FOR CONCRETE CEILINGS

SIMBOL

INSTALLATION INSTRUCTIONS 1 Prepare the container for installation by fastening the cover on the formwork with nails or screws.

Installation allowed on normally inﬂammable surfaces **

Certain maximum temperatures are laid down on the ceiling recess surfaces referred to an ambient temperature of 25°C such as:

Drill the bottom of the container with holes and prepare the empty conduits for the power supply making sure no concrete is drawn in.

max 90°

Engage the indentations at the bottom of the container in the holes on the cover.

max 130°

Remove the formwork to gain access to the ceiling recess. In the case of concrete ceilings with lined surface, ﬁt the ceiling recess in the concrete by means of an expanded polystyrene cylinder (remove after grouting). Drill the ceiling cut-out in the lined surface, then proceed to install the luminaire.

N.B.: The safety transformer for very low safety voltage luminaires or the remote control gear for luminaires with discharge lamps, should be located outside the container in a well ventilated place easily accessible for inspection when required.

(+5°C tolerance) at 1.06Vnom. (normal operation) (on mounting surface, ceiling cut-out, side walls and top of recess) (+5°C tolerance) at 1.1Vnom. (abnormal operation) (on mounting surface, ceiling cut-out, side walls and top of recess)

N.B. Never, under any circumstance, cover the luminaire with insulating material or the like. there are no max. temperature limits on the mounting For products not marked with surface. Leave a distance of 25 mm in addition to the ceiling recess depth (referred to the highest point of the luminaire).

INSULATION CLASSES REFERENCE STANDARD: CEI EN 60598-1 : 1998-01 CLASS I LUMINAIRE Luminaire in which protection against electric shocks is not just based on the basic insulation but also on an additional safety precaution consisting of connecting the accessible conductive parts to a safety conductor (earth) which is part of the ﬁxed electrical installation thus preventing the accessible conductive parts from becoming dangerous in the event of a failure in the basic insulation. CLASS II LUMINAIRE Luminaire in which protection against electric shocks is not just based on the basic insulation but also on an additional safety precautions consisting of double reinforced insulation. These precautions do not require earthing devices and do not depend on installation conditions. CLASS III LUMINAIRE Luminaire in which protection against electric shocks is based on the very low safety supply voltage and no voltages are produced higher than this.

A Class III luminaire must never be provided with earthing

MINIMUM CEILING RECESS DIMENSIONS (mm) (reference standards: CEI EN 60598-1:1998-01 CEI EN 60598-2-2:1997-06)

25 mm (= 0 se 50/70

)

D = min. distance speciﬁed by the luminaire manufacturer. 50/75

50/75

** Normally inﬂammable material. Material whose ignition temperature is at least 200°C and which does not deform or soften at such temperature. Examples: wood and material made with wood over 2 mm thick. The ignition temperature and resistance to deformation or softening of normally inﬂammable materials are based on values which are widely proven and determined by a test with duration of 15 minutes.

458

GENERAL INFORMATION FOR DOWNLIGHTS

IP x x x TABLE OF IP RATINGS

LIGHT AS CAUSE OF COLOUR FADING

IP CLASSIFICATIONS The degree of protection the luminaire provides against the ingress of dust and moisture is classiﬁed according to the Ingress Protection (IP) System. The protection degree for each type of luminaire we manufacture tells you the type of protection that we guarantee when a luminaire comes in contact with either solid foreign bodies or from the ingress of moisture.

In order to minimize fading of light-sensitive objects, the use of UV filters is recommended and/or lamps with limited UV emission. Efficiency of the UV filters depends on the level of illumination (lux), the distance of the light sought, exposure time and sensitivity of the individual objects to light. CORRECTION FACTORS

1a NUMBER: protection against the ingress of solid foreign bodies and access to hazardous parts

Symbol

No-Protection

Protection against solid objects 50 mm

Protection against solid objects 2,5 mm

Protection against solid objects 1 mm

Dust-protected and protection against access with a wire

Dust-tight and protection against access with a wire

2a NUMBER: protection against harmful ingress of water

HALOGEN FLUORESCENT METAL HALIDE

CALCULATION OF MAX. EXPOSURE TIME T max = T x F x 1000 lux on object Example: suppose a class 3 fur (rather delicate) is illuminated by metal halide lamps average of 500 lux: - with normal glass T max = 300 x 1,5 x 1000 = 900 hours 500 - with anti-UV ﬁlter

Symbol

Protection against dripping water (vertically falling drops)

Protection against dripping water tilted 15 deg

Protection against rain

Protection against splashing water

Protection against water jet

Protection against heavy seas

Protection against the effects of immersion

...m

Symbol

0 1 2

200g

250g

350g

6 7 8

Description No-Protection

150g

250g

0,5kg

1,25kg

2,5kg

5kg

300 x 2,5 x 1000 = 500

1300 hours

Suppose, instead, a spot light of 10,000 lux is to be used: - with normal glass Tmax = 45 hours; - with anti-UV ﬁlter Tmax = 75 hours. INSTALLATION NOTES Colour fading of materials depends on various factors. Those associated with light are: - resistance of the object to light; - quantity of light on the object; - exposure time; - type of light. DIN STANDARD 54004 (test for colour fastness of textiles 8/93) deﬁnes 8 classes of resistance. Time T (maximum exposure time to natural light of 1000 lux without any appreciable fading effects) is determined according to experimental tests (*). * source: OSRAM technical information B/84

Protection against the effects of submersion

3a NUMBER: protection against external mechanical impacts

T max =

Description No-Protection

CORRECTION FACTOR F NORMAL GLASS ANTI-UV FILTER 2 4 2 4 1,5 2,5

Protection against solid objects 12 mm

LAMP TYPE

Description

CLASS DIN 54004 1 2 3 4 5 6 7 8

TIME T (HOURS) 70 150 300 600 1200 2500 5000 10000

Protection against an impact energy of 0.15 J of a 150 g object

10 cm dropped from a height of 10 cm

(the higher the class = the greater the resistance to colour fading) These exposure times can be increased if artiﬁcial light is used with protective shielding.

Protection against an impact energy of 0.20 J of a 200 g object 10 cm dropped from a height of 10 cm Protection against an impact energy of 0.35 J of a 250 g object 15 cm dropped from a height of 15 cm

LUMINAIRES FOR HALOGEN LAMPS WITH DICHROIC REFLECTOR Luminaires for halogen lamps with dichroic reflector are supplied with safety glass to be placed in front of the lamp. When using halogen lamps with dichroic reflectors already fitted with glass, the safety glass included in the luminaire kit should be eliminated.

Protection against an impact energy of 0.50 J of a 250 g object

20 cm dropped from a height of 20 cm

Protection against an impact energy of 0.70 J of a 350 g object

20 cm dropped from a height of 20 cm 40 cm

Protection against an impact energy of 1 J of a 250 g object dropped from a height of 40 cm

40 cm

Protection against an impact energy of 2 J of a 0.5 Kg object dropped from a height of 40 cm

40 cm

Protection against an impact energy of 5 J of a 1.25 Kg object dropped from a height of 40 cm

40 cm

Protection against an impact energy of 10 J of a 2.5 Kg object dropped from a height of 40 cm

40 cm

Protection against an impact energy of 20 J of a 5 kg object dropped from a height of 40 cm

459

GENERAL INFORMATION FOR DOWNLIGHTS

HPF CONTROL GEARS All kinds of lamps, whether discharge or fluorescent require a device to control the power supply current. This task can be performed by electromagnetic control gear whose characteristics correspond to those of the lamp in question. In other words, a non-specific control gear cannot power a lamp. The most economical way of powering a lamp is to use an electromagnetic control gear, which is known to have long life (over 25 years) providing the indications given in the assembly instructions provided with all luminaires are respected (for example: never cover a recessed Luminaire and its control gear with insulating material, and do not recess surface-mounted Luminaires – even if only partially). To ensure the lamps function correctly – and to avoid reducing their chromatic yield and life – it is equally important to ensure that the power supply voltage is almost completely constant, that is, with a tolerance of +/-3% with respect to the rated value. Any fluctuation beyond the values indicated may seriously damage the lamp. Electromagnetic control gear is not however capable of stabilising the voltage, so the mains voltage must guarantee the constancy required. As a result, when a Luminaire using electromagnetic Control Gear is purchased, the rated power supply voltage and frequency values must be specified, so that the most suitable control gear may be identified. The life of the lamp is very important. In fact, when a lamp burns out, the “rectifying effect” occurs, thus restoring the control gear, and therefore also the ballast, to their maximum operating conditions. For this reason, all Reggiani control gears are equipped with self-resetting thermal device. The electromagnetic ballast must be fitted (except in systems with centralised phasing) with a capacitor with power factor correction that limits the reactive power, and therefore the current in the circuit. A reduced current enables the cross section of the cables to be decreased, thus making the systems more economical and reducing heat losses. Having realised the benefits given by the capacitor with power factor correction, Reggiani adopts this device in all its luminaires using electromagnetic control gear. The rectifying effect that occurs with a burnt out lamp also has negative effects on the capacitor with power factor correction itself. For this reason, Reggiani luminaires with HPF control gear are also equipped with safe capacitors, designed in respect of the latest CEI EN 61048:2000-11 standards. When discharge lamps (metal halide and sodium vapours) are used, the electromagnetic ballast and the capacitor must be fitted with an Ignitor, essential to generate the high voltage pulse (up to 5kV) necessary to start the lamp. The safest Ignitor is the superimposed type – adopted by Reggiani – which does not use the control gear to produce the high voltage necessary for starting. In fact, the control gear, which must withstand the high voltage, may find itself in a critical situation whenever the lamp does not start, as the starting command is persistent. Bearing in mind these problems, the safest combination – is HPF control gear – A ballast with thermal protection, a capacitor (manufactured in accordance with the standards mentioned above) and a timed Ignitor. The latter has the advantage of stopping the starting command after a pre-set time (maximum 20 minutes), thus avoiding unnecessary stress on the control gear. This is what Reggiani has done, adopting in its control gears a digital superimposed timed Ignitor – with timed control of the pulse by means of a microprocessor – which also enables the control gear to be installed from a remote location, a reduction of radio emissions and hot re-ignition times. Another advantage of HPF control gears is that they respect the European Electromagnetic Compatibility Directives, so there is no need for interference filters.

460

HF CONTROL GEARS FOR METAL HALIDE LAMPS, 220/240V AC 50/60Hz Metal halide lamps may beneﬁt considerably from the use of HF control gears. Lamps are sensitive to sudden changes in voltage – which affect their chromatic yield and their life – and the use of a HF control gears enables the changes in Colour temperature of the lamp according to the voltage to be maintained within narrower tolerance limits. The main advantages of HF control gears are: —

no strobe effect;

—

control of lamp voltage independent of the mains voltage;

—

improved colour stability irrespective of the mains voltage, for the entire life of the lamp;

—

longer life of the lamp as a result of controlled ignition and hot re-ignition;

—

rapid, automatic disconnection of a burnt out lamp from the mains power supply, to prevent it from exploding;

—

rapid cold ignition (50% of the luminous intensity is reached in half the time required by HPF control gears);

—

energy saving, due to limited power supply losses;

—

Broad working voltage limits (198-264V), which cancels the effects of sudden changes in the mains power supply, which is particularly useful in environments where operating machines (heat pumps, air-conditioning systems, industrial refrigerators, mixers, etc.) are installed. In these situations, luminaires equipped with a HPF control gear should not be used; while the adoption of a HF control gear, with luminaires distributed equally across the three phases, solves the problems caused by sudden changes in voltage.

In luminaires with remote control gear, the HF control gear is more ﬂexible than conventional control gear; in fact, it can be set at a maximum distance of 3m from the Luminaire, maintaining the level of radiated electromagnetic interference unchanged.

GENERAL INFORMATION FOR DOWNLIGHTS

HF CONTROL GEARS FOR FLUORESCENT LAMPS, 220/240V AC 50/60Hz.

TABLES FOR BALLAST-LAMP CLASSIFICATION Classiﬁcation of ballast-lamp circuits for energy efﬁciency in lighting

Current fluorescent lamps – sensitive to sudden changes in voltage, which drastically reduce their chromatic yield and life – may benefit from the use of HF control gears, as they maintain the luminous flux within narrower tolerance limits and considerably reduce energy losses.

Linear

In brief, the main advantages of HF control gears are: —

no ﬂicker at power on;

—

no strobe effect during normal operation, due to the high working frequency > = 40 kHz;

—

noise-free operation, an important characteristic for environments that require absolute silence, or at least the absence of background noise (theatres, concert halls, etc.);

—

lamp voltage control independent of the mains voltage;

—

improved stability of the luminous ﬂux, irrespective of the mains voltage, for the whole life of the lamp;

—

longer life of the lamp (with an increase of 30-50% compared to a conventional control gear), due to controlled ignition and hot re-ignition. This characteristic is what makes the HF control gear the most suitable device for applications which require more than three power on/off cycles a day;

energy saving, due to the limited power supply losses (25-30% less than those of HPF control gear); CELMA classiﬁcation: A1/A2

—

broad working voltage limits (198-264V), which cancel out the ﬂuctuations in the mains power supply, which is particularly useful in environments where operating machines (heat pumps, air-conditioning systems, industrial refrigerators, mixers, etc.) are installed. In these situations, luminaires equipped with a HPF control gear should not be used; while the adoption of a HF control gear, with luminaires distributed equally across the three phases solves the problems caused by sudden changes in voltage;

CLASS Lamp power 50Hz

Ilcos code

15W 13.5W

FD-15-E-G13-26/450

18W

16W

FD-18-E-G13-26/600

30W

24W

FD-30-E-G13-26/895

36W

32W

FD-35-E-G13-26/1200

38W

32W

FD-38-E-G13-26/1047

58W

50W

FD-56-E-G13-26/1500

70W

60W

FD-70-E-G13-26/1800

A1 under consideration under consideration under consideration under consideration under consideration under consideration under consideration

Compact 2 tubes Lamp type TC-L

rapid, automatic disconnection of the mains power supply when a fault is found in the lamp;

— a

—

Lamp type

TC-F

direct current operation, in installations with an emergency light, in accordance with the VDE0108 standard.

Ilcos code

50Hz

18W

16W

FSD-16-E-2G11

24W

22W

FSD-24-E-2G11

36W

32W

FSD-36-E-2G11

40W

FSD-40-LP-2G11

55W

FSD-55-LP-2G11

A1 under consideration under consideration under consideration under consideration under consideration

Important: When connecting independent control gears in cascade, “a maximum of six luminaires can be used* *when using the terminals of the control gears themselves.

Lamp type

Ilcos code

50Hz

18W

16W

FSS-18-E-2G10

24W

22W

FSS-24-E-2G10

36W

32W

FSS-36-E-2G10

10W

HF 9.5W

13W 12.5W 18W 16.5W 26W

24W

)19W )21W )24W )26W )31W )33W )36W )38W )36W )36W )41W )43W )36W )40W )43W )45W )55W )59W )64W )67W )68W )72W )77W )80W

)19W )21W )24W )26W )25W )27W )30W )32W )36W )38W )41W )43W )44W )46W )59W )63W

Ilcos code FSO-10-E-G24q=1 FSO-10-I-G24d=1 FSO-13-E-G24q=1 FSO-13-I-G24d=1 FSO-18-E-G24q=2 FSO-18-I-G24d=2 FSO-26-E-G24q=3 FSO-26-I-G24d=3

A1 under consideration under consideration under consideration under consideration

)11W )13W )14W )16W )14W )16W )17W )19W )19W )21W )24W )26W )27W )29W )32W )34W CLASS

Lamp power

TC-T / TC-TE 50Hz

18W

16W

26W

24W

Ilcos code FSM-18-I-GX24d=2 FSM-18-E-GX24q=2 FSM-26-I-GX24d=3 FSM-26-E-GX24q=3

32W

FSMH-32-UP-GX24q=4

42W

FSMH-42-UP-GX24q=4

A1 under consideration under consideration under consideration under consideration

Compact 2 D Lamp type

)16W )18W )21W )23W

under consideration )19W )21W )24W )26W under consideration )25W )27W )30W )32W under )36W )38W )41W )43W consideration

Compact 6 tubes Lamp type

CLASS

Lamp power

TC-D / TC-DE 50Hz

CLASS

Lamp power

Compact 4 tubes —

CLASS

Lamp power

Compact 4 tubes ﬂat Lamp type

)19W )21W )24W )26W )27W )29W )32W )34W )36W )39W )46W )49W CLASS

Lamp power

TC-DD / TC-DDE 50Hz

10W

16W

14W

21W

19W

28W

25W

38W

34W 55W

Ilcos code FSS-10-E-GR10q FSS-10-L/P/H-GR10q FSS-16-I-GR8 FSS-16-E-GR10q FSS-16-L/P/H-GR10q FSS-21-E-GR10q FSS-21-L/P/H-GR10q FSS-28-I-GR8 FSS-28-E-GR10q FSS-28-L/P/H-GR10q FSS-38-E-GR10q FSS-38-L/P/H-GR10q FSS-65-E-GRY10q=3 FSS-65-L/P/H-RY10q=3

under consideration )11W )13W )14W )16W under consideration )17W )19W )21W )23W under consideration )22W )24W )27W )29W under consideration )29W )31W )34W )36W under consideration )38W )40W )43W )45W under )59W )63W consideration

461

GENERAL INFORMATION FOR DOWNLIGHTS

1-10V DC DIMMABLE HF CONTROL GEARS, 220/240 V ac 50/60 Hz

DIGITAL DIMMABLE HF CONTROL GEARS 220/240 V ac 50/60 Hz

The evolution of lighting systems is towards a more rational use of light sources. In this sense, an important role is played by dimming/regulating systems, of which the 1-10 V DC analogue version represents the simplest and most economical solution. The typical applications of these systems are offices, conference rooms, cinemas, and theatres, that is, all environments in which a fine adjustment of the lighting is necessary. luminaires normally work in combination with other devices (presence detectors, light sensors, etc.), so as to obtain different kinds of control systems, which may be classified as follows.

There are lighting systems that require high visual comfort, a flexible and creative use of light as a fundamental component of the architecture of interiors and maximum energy efficiency. Other requirements include the necessity to balance artificial light with natural light, to have power-on controlled by presence detectors and to integrate lighting with other building automation systems (anti-intrusion control, fire-fighting control etc.). Well, not only are all these requirements satisfied, the emission of light can be optimised to obtain an energy saving of 60%, which enables the higher initial cost of the luminaires to be covered in the medium term.

Manual Control Using remote control units, with the built-in 1-10V DC control gear, simple and economical adjustable systems can be set up. The control units can handle up to 50 Luminaires, over a maximum distance of 50m (a combination of two or more regulating units may not be used in any cases). There are two types of control unit: with a knob (rotary regulation) or a pushbutton (which, when pressed for less than half a second, powers the light on/off; if it is pressed for more than half a second, flux adjustment begins, from the minimum to the maximum value; when the pushbutton is released, adjustment stops; when the pushbutton is pressed – with the Luminaire on – for more than half a second, adjustment is resumed, decreasing the flux to the minimum value). If the on/off switch is built into the control unit, a maximum of 10 lamps or 5 x 2 luminaires can be combined. Consequently, in a system with 50 Luminaires, the wiring diagram must conform to the figure below.

N L3 L2 L1 N L

DIM ECG DIM ECG

-+ LJ

DIM ECG L1 L2 L3 N

- +

But the functional advantages of a DALI HF control gears go well beyond the possibilities offered by the 1-10V interface: — each HF control gear can return operating status signals (for example, lamp ON/ OFF, lamp current or lamp fault), which are an essential condition for integrating lighting devices into the most complex building control systems); — the system can be set so that all the HF control gears reach the desired level of regulation at the same time, even if they start from different levels of illuminance; — there are no limits to the number of changes between on/off statuses because they can be executed directly through a digital signal without having to use relays; — the luminous flux can be regulated from 1-100%, with a logarithmic curve. As the human eye is sensitive to changes in the flux – in particular between 0 and 10% – irregularities and rapid changes are annoying, and only a digital device with a logarithmic regulation enables a pleasant, gradual increase in the flux from 1 to 100%; — the regulating times can be programmed; — the maximum distance between the control module and the most distant Luminaire is 300m, if the cross section of the signal cable is at least 1.5 mm2; — a five-pole cable can be used, or the control cables can be laid with the mains voltage cables, providing an NYM 5x1.5 mm2 cable is used.

{

Manual Control Unit

In fact, we now have a new standard of HF control gears, which may be interconnected on an interference-free digital communication network, called “DALI”. DALI is not a system but the definition of an interface, the same for all manufacturers, which allows communication between a control module and the HF control gears, on a digital network of up to 64 users. Each individual HF control gear can be identified (addressed) and programmed through the control module; in addition, each Luminaire can be assigned to 16 freely definable groups, irrespective of its actual position, and can save up to 16 different technical lighting values (scenarios). As each HF control gear can be assigned to more than one group, an infinite number of scenarios can be designed, with a smaller number of components than that required by comparable system (1-10V).

Max. 50 DIM ECG

Automatic Control By combining dimmable luminaires with presence and light sensors, the emission of light is optimised, with energy saving of up to 60%, and the higher initial cost of the luminaires is covered in the medium term. Building Automation In addition to the automatic light control system, light control is centralised through the use of computers and dedicated software.

The use of dimmable luminaires imposes the following functional restrictions: — if the room temperature is less than 15°C, ignition of the lamps may represent a problem, especially if the flux is regulated to the minimum; in this case, to facilitate power-on, the flux must be regulated to the maximum; — during regulation, the flux and colour temperature of the lamp may vary; they will stabilise within a time of about 30-40 minutes; this effect may be accentuated with amalgam lamps dentified by “IN”.

462

The fact that the DALI system is easy to use emerges as soon as it is put into operation. In fact, the routines for detecting and addressing the components connected, present in the control module, are largely automatic; the user simply has to complete the settings, such as diversify the scenarios or modify the groups of luminaires.

GENERAL INFORMATION FOR DOWNLIGHTS

ELECTRIC LIGHTING INSTALLATIONS. INFORMATIVE NOTES. To ensure that the luminaires equipped with a HF control gear function correctly, the following design constraints of the electrical system must be respected:

To complete the information about the contribution of the harmonic currents in a lighting system, we provide the following table, which indicates the consumption values in the stationary state, for the power values of the various control gears, and the value of the harmonic components up to the 13th. HF control gears for ﬂuorescent lamps

—

split the luminaires equally between the three power supply phases;

—

systems with ﬂuorescent lamps: connect a maximum of 48 1x18W-1x42W luminaires or 20 2x32W-2x42W Luminaires, under the same thermal circuit breaker of the C-16A type (these limits are calculated considering a power supply cable with a length of 15m, and 2.5mm2 wires; to size the cables correctly, reference should be made to the relevant standard while – to identify the actual consumption – reference should be made to the CELMA table);

—

systems with a HF control gear and discharge lamps: connect a maximum of 15 35W Luminaires, or 10 70-150W Luminaires, under the same thermal circuit breaker of the C–16A type (these limits are calculated considering a power supply cable with a length of 15m, and 2.5mm2 wires; to size the cables correctly, reference should be made to the relevant standard); systems with HPF control gear and discharge lamps: connect a maximum of 12 35W Luminaires, or 10 70W luminaires and 6 150W Luminaires, under the same thermal circuit breakerof the C–16A type (these limits are calculated considering a power supply cable with a length of 15m, and 2.5mm2 wires; to size the cables correctly, reference should be made to the relevant standard); discharge Luminaires: connect the terminal – identiﬁed by the symbol /Lamp of the control gear – to the corresponding pole/terminal, also identiﬁed on the luminaire; another factor that affects the size of the power supply cables is the emission of the harmonic currents allowed for the Luminaires. The 61000-3-2:/A14:2001 standard establishes – for all luminaires with an input current of less than 16A – the harmonic current limits indicated in the table below.

2x13W

18W

2x18W

26W

2x26W

32W

2x32W

42W

0,080

0,16

0,1

0,19

0,14

0,26

0,17

0,34

0,22

2x42W 0,46

0,002

0,003

0,002

0,004

0,003

0,005

0,003

0,007

0,004

0,009

0,022

0,043

0,027

0,051

0,038

0,070

0,046

0,092

0,059

0,124

0,008

0,016

0,010

0,019

0,014

0,026

0,017

0,034

0,022

0,046

0,006

0,011

0,007

0,013

0,010

0,018

0,012

0,024

0,015

0,032

0,004

0,008

0,005

0,010

0,007

0,013

0,009

0,017

0,011

0,023

11a

0,002

0,005

0,003

0,006

0,004

0,008

0,005

0,010

0,007

0,014

13a

0,002

0,005

0,003

0,006

0,004

0,008

0,005

0,010

0,007

0,014

HF control gears for metal halide lamps 35W

70W

0,210

0,4

150W 0,75

0,004

0,008

0,015

0,057

0,108

0,203

0,021

0,040

0,075

0,015

0,028

0,053

0,011

0,020

0,038

11a

0,006

0,012

0,023

13a

0,006

0,012

0,023

HPF control gears for metal halide lamps

HARMONIC DISTORTIONS OF SUPPLY CURRENT Permissible harmonic current (%)

—

13W In

35W

70W

0,530

0,98

150W 1,8

0,011

0,020

0,036

0,143

0,265

0,486

0,053

0,098

0,180

0,037

0,069

0,126

0,027

0,049

0,090

11a

0,016

0,029

0,054

13a

0,016

0,029

0,054

30% 25%

As a precaution, the protection device is to be chosen bearing in mind the CEI EN 60598-1:2001 standard for Luminaires, which limits the current dispersion on the ground wire to 1mA for every class I luminaire installed. Finally, even if the control gear is class II, to reduce electromagnetic interference to a minimum, the earth wire should be connected.

20% 15% 10% 5% % 2

Harmonic order

463

GENERAL INFORMATION FOR DOWNLIGHTS

EMERGENCY LUMINAIRES FOR FLUORESCENT LAMPS There are two categories of safety or emergency Luminaires: — permanent: emergency lamps are powered even when the normal lighting is working; — non-permanent: the emergency lamps are only turned on when the ordinary lighting is not working. In addition, the emergency Luminaires – in particular, those manufactured by Reggiani – are of a combined type (in a Luminaire containing two or more lamps, at least one is powered by the emergency circuit) or self-contained (all the elements – battery, control unit, power-off and signalling devices – are incorporated in or adjacent to the Luminaire; in the latter case, the remote pack must respect some requirements, such as the IP 40 protection degree, isolation class II and essentially of allowing use as an independent element). The operating modes laid down by the EN 60598-2-22 standard are equally important: — The emergency luminaires must be suitable for direct installation on normally inflammable surfaces (see F mark); — in combined Luminaires, if the emergency circuit lamps and the normal power supply lamps are different, the types must be clearly identified, while the emergency Lampholders must be marked with a green spot, visible during replacement of the lamp (the emergency circuit lamps must always be of the 4-pin type); — the self-contained emergency luminaires must have a signalling device visible during normal use (for example, an LED), which indicates when the battery is being charged, electrical continuity and the functioning of the emergency lamp. The batteries used in the Reggiani packs are Ni/Cd (of the 3.6V-4Ah type for lamps of up to 26W FSQ, and 6 V-4Ah for 32/42W FSMH lamps); they do not require maintenance and normally give at least four years of normal operation. During emergency operation, which starts when the mains voltage drops below 85% of its standard value, the luminaires must be activated within 0.5s, provide 50% of the declared luminous flux within 5s, and provide – after 60s and continuatively – the rated luminous flux for the entire time assigned to emergency operation (which is one hour in all European countries except for Great Britain where it is three hours). The luminous flux guaranteed in an emergency is between 10% and 20% of the luminous flux provided during normal operation. The time required to recharge the batteries must not exceed 24 hours, or – in public environments (for example, hotels) – 12 hours. To ensure the efficiency and life of the emergency pack, it must be installed at the greatest possible distance from the Luminaire body (the distance allowed by the cables provided). Every six months, the functioning of the emergency lighting system should be tested and the batteries should be completely discharged and subsequently recharged, while every four years (and, naturally, whenever the specified duration of power has not been respected), the batteries should be replaced. If the Luminaire is powered by a three-phase system, two separate lines of the same phase must be used. The preferential line to the emergency pack must never be disconnected, except for maintenance operations. With regard to this, the Reggiani emergency packs offer the interesting function of remote power-off. To do this, the disabling circuit simply has to be closed on terminals 3 and 4 of the pack, connected, respectively, to the (+) and (-) poles of a 9V battery, so as to avoid switching to emergency operation. Up to 10 luminaires may be connected to the battery in parallel.

464

GENERAL INFORMATION FOR DOWNLIGHTS

TRANSFORMERS FOR LOW VOLTAGE LAMPS Low-voltage lamps – the most common of which are the dichroic lamps – generally require a power supply voltage of 12V, even though there are some running on 24V or 6V. Transformers capable of supplying such a low voltage are subject to very high currents, so they must be suitably protected by means of a fuse or thermal circuit breaker, both on the primary circuit and on the secondary circuit. The fuse is to be chosen taking into consideration the current of the secondary circuit, which is more than 20 times as high as the input current. For example, in a 100VA transformer, supplied at 230V, the input current is 0.4A; but the output current (with a voltage of 12V) reaches 7.5A, a value comparable with the one present in a 2000W electric oven. As a result of these currents, the wires that connect the lamp to the transformer must have a limited length and an adequate cross section, so as to reduce voltage drops. For further details, see the table below.

At this point, a comparison should be made between conventional transformers and HF ones. The latter ensure an almost completely constant output voltage even when there are marked ﬂuctuations in the input voltage (with positive effects on the life of the lamp, which is about 20% longer than that of a lamp powered by a HPF transformer). Consider that an over voltage of 6% compared to the rated voltage (that is, a lamp voltage of 12.7V) reduces the life of the lamp by 50%. In addition, an excessive power supply causes the lamp to overheat, and resulting in the risk of starting a ﬁre.

14,00 13,50 13,00

Table 1 S = CONDUCTOR CROSS SECTION L = DISTANCE TRANSFORMER: LAMP

12,50 12,00

1.0 mm2

1.5 mm2

2.5 mm2

4.0 mm2

6.0 mm2

120 W

180 W

240 W

380 W

550 W

80 W

110 W

200 W

320 W

500 W

40 W

55 W

140 W

160 W

250 W

25 W

35 W

65 W

100 W

160 W

20 W

25 W

50 W

80 W

120 W

10 W

20 W

65 W

100 W

40 W AMPERE- W V 12 V=Wx1 24 V=Wx2 6 V=W:2

11,50 11,00 10,50 10,00

210

220

230

240

250

260

Finally, an exclusive feature of HF transformers is their excellent dimmer features, which enables the luminous ﬂux to be regulated with the phase cut executed by a potentiometer.

To limit the installation costs, more than one lamp is normally powered by a single transformer. This choice is only correct if the following rules are respected. The power of the transformer must be equivalent to the sum of the powers of the lamps connected. In fact, an oversized transformer provides a voltage higher than 12V, determining a considerable reduction in the life of the lamp. For the various lamps to have an equivalent chromatic yield and light emission, the transformer connecting cables must have the same length. When one of the lamps connected burns out, it must be replaced quickly, to prevent the others – supplied with too much power – from deteriorating. When the transformer for low-voltage lamps is not built into the Luminaire, it is necessary to choose one: —

that is suitable for assembly on ﬂammable surfaces, that is, with the mark

—

that is protected against solid foreign objects, that is, with a protection degree of IP 40.

—

whose safety class is II

—

the transformer must be suitable for assembly as an independent element

—

if it is of a conventional type (HPF), the transformer must be a safety transformer resistant to short-circuits, over voltages and over temperatures

—

if HF, the transformer must be immune to electromagnetic interference, in accordance with the EN61547 standard, and meet the requirements laid down by the EN61000-3-2 (harmonics) and EN55015 (radio interference) standards, if necessary, through the use of special attenuating ﬁlters

465

FRAMING PROJECTORS

Framing projectors for luminaires with the Polyblok® system, designed for halogen lamps with dichroic reﬂector.

Code 0.01912.00 for round, square and rectangular light frames and code 0.07397.00 for square and rectangular light frames. A system of lenses designed to take the four plates supplied, three of which have holes in them (diameters 6/14/20 mm) while one is blank. When one plate only is inserted, a round beam of light will be obtained, its size depending on the distance between the illuminating body and the surface to be illuminated / size of the hole made in the plate, while the blank plate is suitable h for customizing by the h customer to suit his own requirements.

h Lux

Ø 6 mm

Ø 12 mm

Ø 20 mm

Code 0.01913.00 and code 0.07395.00 for round light frames. A system of lenses which incorporates a “diaphragm” allowing precision adjustment of light frames.

Ø 0,14

0,22

0,38

0,40

0,50

lux 3300

1000

430

230

170

Ø 14

Ø 0,45

0,92

1,40

1,90

lux 4000

1100

450

250

50 W 27°

2,30

Ø 0,25

0,50

0,70

1,0

1,5

150

lux 3900

1000

430

230

150

Ø 20

50 W 24° Min lux h

0,1

0,2

0,28

0,38

lux 3800

1000

500

250

466

50 W 27°

50 W 24° Max lux h

Ø6

50 W 27°

0,49

Ø 0,33

0,66

1,0

1,4

1,7

160

lux 3800

1000

430

220

140

FRAMING PROJECTORS

When all four plates are ﬁtted into the body by inserting the ends opposite to those with the holes in them, square, rectangular, or diamond-shaped light frames can be obtained easily and economically.

h Lux

50 W 27° Max lux h

D 0,30

0,60

0,95

1,22

1,55

lux 4100

1000

450

250

180

50 W 27° Min lux h

D 0,05

0,10

0,17

0,22

0,26

lux 3500

850

450

250

170

467

CERTIFICATIONS

All luminaires manufactured by Reggiani spa Illuminazione and shown in this catalogue conform to Italian standard CEI EN 60598-1, classiďŹ cation 34-21 IEC 60598-1 (and relative parts 2). Recessed luminaires are manufactured according to standard CEI EN 60598-2-2, while surface mounted luminaires are manufactured according to standard CEI EN 60598-2-5. All Reggiani spa Illuminazione products fall within the ďŹ eld of application of European directives: 2006/95/CE, EMC 2004/108/CE

468

ISO 14001 certiďŹ cation The Reggiani environmental management system is ISO 14001 certiďŹ ed: recognition of a concrete commitment to environmental sustainability. Our way of making light has always been highly tangible. Likewise our management of the environmental issue is not limited to mere statements of principle, it envisages actions that, day in and day out, make a real contribution to keeping the environmental impact of corporate activities under control and systematically seeking to improve them in a manner that is coherent, effective and sustainable. It is a mindset, a lifestyle that affects our each and every action, the strategy guiding our basic choices and daily decisions within an integrated system that pays utmost attention to reducing energy consumption and CO2 emissions, applied to reduce everything from light pollution, to paper wastes and shipping costs. Today, Reggiani luminaires ďŹ t with the IOS system are among those with the lowest energy consumption and thus help reduce CO2 emissions. Considering environmental protection as top priority also guides our corporate design and industrial choices. Thus, when choosing production technologies, materials and suppliers, we consider quality and ecosustainability along with economic parameters. It is a way of investing in the most important project that affects us all: our future.

469