1 Railing
SECURILISSE®
8 GANGWAYS
SECURITOIT®
9 LADDERS
SECURITOIT®
10 FLEXIBLE LADDERS SECURECHELLE®
12 CAGED LADDERS
SECURECHELLE®
14 P.P.I.
SECURILIA®
15 ANCHORS
SECURIFIX®
19 LIFELINES
SECURIFIL®
28 VERTICAL LIFELINES SECURIFIL®
30 SOLID LIFELINES SECURILIGNE®
Collective and personal fall protection devices and equipment
Long-standing experience in safety
Maintaining safety must be a natural act that goes without thinking. For over 20 years, SOMAIN SECURITE has focused the development of its product lines around 3 pillars: Immediate use. Devices must be adapted for optimal safety anywhere in the work area. Ease of use There should be no constraints, obstacles or complications to hinder the user from maintaining his or her safety. Maintenance-free and rugged Systems must be available for use under any circumstances, year after year. SOMAIN SECURITE equipment holds up under stresses greater than those required the standards. Our internal engineering department designs them for simple use without constraints: The user is protected simply by connecting the lanyard karabiner to the device. The production materials are selected for their strength and resistance over time. This is why SOMAIN SECURITE stands behind the reliability of its products, and guarantees them for up to 10 years.
Continuous improvement In his daily effort to improve its products and services, SOMAIN SAFETY offers some new features this year: A ‘Z’ shaped mounting base to fix the railing under a metal coping. A guard folding body that fits our SECURILISSE ® range including SECURILISSE ® autoportant . Significant improvements in competitiveness have been made to anchor bollard SECURIFIX ® . The anchor points suitable for the lightweight roofing: steel tray, tray and standing seam sealed. An evolution of the SECURECHELLE ® caged ladder range. A page of the catalog is devoted to PPE (personal protective equipment), you will find kits for users and some essential equipment or considered relevant. Be aware that there is a separate catalog devoted exclusively to our offer PPE
RAILING 速 SECURILISSE
System: Railing Standard: EN ISO 14 122-3 & NF E 85-015
SECURILISSE ® Summary of standards 14 122-3 et NF E85-015
Railing and middle rail
500 mm max.
a «a» < 100 mm a baseboard is mandatory
500 mm max.
1000 to 1100 mm min.
500 mm max.
With baseboard
Baseboard
100 mm min.
a 10 mm max.
A baseboard is required when the acroterion height is less than 150 mm. If there is no acroterion, the space between the lower edge of the baseboard and the floor must not exceed 10 mm and the baseboard must be at least 150 mm tall. The minimum height of the railing must be at 1000 mm in relation to the traffic floor. The free space under the railing must not exceed 500 mm in height. The distance between studs should preferably be limited to 1500 mm. However, if this distance is greater, special attention should be paid to the strength of the stud anchoring points and the anchoring mechanisms.
2
Ships Ship Sh ip ps within with wi ith thiin in iin n Maintenance free
48
hours
Ships Ship Sh ip ps within with wi ith thiin in iin n Maintenance free
48 hours
System: Railing Standard:
EN ISO 14 122-3 & NF E 85-015
SECURILISSE@ Skylight Protection Collective protection for small area
Protection skylight is a recurring request in compliance roofs. SOMAIN SAFETY offers standard and economical solution extanded from railing SECURILISSE ® aluminum. This protection is weighted with concrete blocks and requires no drilling in the roof sealing. It comes with rubber soles.
Interior length
3 availables sizes : Interior length
Interior length
• 1000 X 1000 mm • 1500 X 1500 mm • 2000 X 2000 mm
Gate available in option
SECURILISSE® metal deck Aluminum railing for metal deck delivered in a KIT.
It is attached to the metal deck with galvanized steel plates into which standard anchoring parts are screwed. The SECURILISSE® is anchored into the metal deck with drywall screws. A seal is maintained by attaching a joint in advance between the metal deck and the adapter plate.
T connector Oval section Made of ext r uded alum i num , i t m akes up th e s tud, st r ut , and r ai l i ng
Standard cast al umi num part Attached by 3 pre-mounted bead screws
P l a t i ne a v a nt Ref. : GCA33
Gal vani zed steel pl ate anchored by 12 seal ed sel f-dri l l i ng screws Ø6.3x25
Galvanized steel plate Ref. : GCA34
Gal vani zed steel pl ate Anchored by 6 seal ed sel f-dri l l i ng screws Ø6.3x25
3
Ships Ship Sh ip ps within with wi ith thiin in iin n
System: Railing Standard: EN ISO 14 122-3 & NF E 85-015
Maintenance free
48
hours
SECURILISSE® autoportant The SECURILISSE ® alu freestanding allows installation of a railing without having to drill through the building seal. The studs are ballasted with concrete blocks.
SECURILISSE® autoportant Version spéciale thermo-laquée
4 - s t e p s t u d i n s ta llati o n T connector
Elastomer footing.
Standard cast aluminum part
Ref.: GC1
Attached by 3 bead screws
Interface between the concrete block, and the building seal
Oval section
Made of extruded aluminum, it makes up the stud, strut, and railing
Concrete block
Bead screw
Ref.: PB
To connect the block with the unit
25 Kg of molded concrete.
Aluminum foundation
Standard cast aluminum part
Attached by 3 cone-point set screws
SECURILISSE® autoportant rabattable Railings ballasted and folding. The «retractable» type means that SECURILISSE ® can be lowered and invisible from the ground. A System stop slide stiffens all and lock into position. This Railing aims to provide the most economical and practical solution in terms of handling and installation when a permanent Railing set is not possible.
T connector
Comes in 4,40 m length sections.
R accord en T
aluminum part Concrete block
Attached by 3 bead screws
2 5 Kg
L o ck sl i d e
S wi v e l i ng f oot a g e
All: amount, strut and stop slide comes preassembled. 4
Elastomer footing.
Ships Ship Sh ip ps within with wi ith thiin in iin n Maintenance free
48
System: Railing Standard: EN ISO 14 122-3 & NF E 85-015
hours
SECURILISSE ® alu Flat fixing base
Ref.: GCA11
Folding Option
Molded aluminum center-to-center distance 100 mm Anchoring: 2 M12 Dowel pins
GCD1
GCD2
GCD3
GCI1
GCI2
GCI3
Railing
Railing and midle railing
Railing, midle railing and baseboard
Wall mount fixing base
Ref.: GCA12
Molded aluminum center-to-center distance 100 mm
Folding Option
Anchoring: 2 M12 Dowel pins
GCDA1
GCDA2
GCDA3
GCIA1
GCIA2
GCIA3
Railing
Railing and midle railing
Railing, midle railing and baseboard
Metal coping fixing Base
Ref. : GCA 03 Molded aluminum
Folding Option
Anchoring: 1 M12 Dowel pins
GCRE1
GCRE2
GCREI1
GCREI2
Option : plaque de déport pour acrotère isolé
Railing
Railing and midle railing
5
Ships Ship Sh ip ps within with wi ith thiin in iin n
System: Railing Standard: EN ISO 14 122-3 & NF E 85-015
Maintenance free
48
hours
SECURILISSE ® alu The components of the
SECURILISSE ® alu
offer great adaptability.
Le SECURILISSE alu is delivered in a kit. The middle rail and the oval section are delivered in 3 or 6-meter lengths. It can be assembled on site, without welding using the connecting parts described below. However, we can cut the studs in our workshop at your request. ®
Oval section
Aluminum middle rail
T connector
L connector
stud and railing 65 X 30 mm
Ø 30 mm
stud - railing
stud - railing
Ref.: GCA1
Horizontal angle sleeve
Ref.: GCA4
Articulated horizontal angle sleeve
Ref.: GCA04
For inclined railings
Aluminum angle sleeve
Ref.: GCA16 middle rail
6
Ref.: GCA14
Ref.: GCA5
Vertical angle sleeve
Articulated T connector
(for level changes)
(stairways)
Ref.: GCA3
65 X 30 section flashing
Ref.: GCA28
Ref.: GCA25
Railing - wall connector
to attach to the studs.
Ref.: GCA7
Middle rail-wall connector.
Offset middle rail connector
Ref.: GCA27
Ref.: GCA21
Ref.: GCA6
Aluminum cap for railing
Ref.: GCA8
Aluminum baseboard
Ref.: GCA17 3 m length.
Plastic cap Ø 30 mm
Ref.: BP30 for middle rail
PASSAGEW A Y S 速
SECURITOIT
Passageways and Stairways Light and non-slip: A pathway on a fragile or slippery roof can be secured with aluminum decking. It can be equipped with railings, stairways, gates, etc. Consult us for all special designs; our engineering office is at your service to study the feasibility of your project.
System: Passerelle Standard: EN ISO 14 122 & NF E 85-014
Maintenance free
SECURITOIT速 V3 A completely adaptable passageway. SECURITOIT速 V3 is the new aluminum passageway developed this year by the SOMAIN SECURITE engineering department. The SECURITOIT速 V3 pathway is composed of 800 mm wide aluminum decking sections (standard). The section that constitutes the girders was designed to support the decking and accept an optional railing and baseboard.
8
System: Maintenance free
Passerelle Standard:
EN ISO 14 122 & NF E 85-014
SECURITOIT速 V3 A Global solution We developed a stairway section specially adapted to the SECURITOIT速 V3. Thus, the SECURITOIT速 line has a coherent and complete compliance solution for pathways and level changes in technical areas. Angle connector
Aluminum railing
Aluminum section toe-kick Standard decking Left-side exit
Passageway connector plate
Stairway to passageway connector plate Passageway end cap
New stairway section
Step width 800 mm
9
System: Passerelles Standard: EN ISO 14 122
Maintenance free
Crossover ladder Aluminum obstacle crossing Light, strong, and quickly installed, we have crossover ladders of various crossing heights from 700 to 1000 mm max. Compliant with standards 14 122-2 and 14 122-3.
49째
49째
1000
The mechanically bolted assembly can be mounted without welding on site. It can be freestanding on concrete blocks or anchored in the ground.
3-step crossover ladder
Ref.: T57
1661
Special stairways and platforms The engineering department is at your service to create special equipment to bring industrial sites into compliance.
10
System: Echelle Standard:
Maintenance free
No standard
SECURECHELLE® double Flexible and light ladders. SECURECHELLE® flexible is a line of ladders with rungs attached to flexible studs made of textile straps. In the version designed to stay on the roof, a stainless steel strip replaces the straps. The SECURECHELLE® flexible attaches to a metal spreader that distributes the user’s weight across both strips. It is easy to transport because it can be rolled up and stored in a special bag. Delivered in a 3-meter length.
Flexible ladder with offset rungs
Ref.: E30
Used as support on sloped surfaces: roofs, domes, tanks, etc. 3-meter lengths that can be attached end to end. Weight 12 kg
Flexible ladder with in-line rungs
Ref.: E32
Used in vertical configurations where a standard ladder cannot be used.
Spreader for SECURECHELLE®
Ref.: E31
for attaching the SECURECHELLE® flexible
to a single anchor.
3-meter lengths that can be attached end to end. Weight 10 kg
11
System: Echelle Standard: EN ISO 14 122-4 & NF E85-016
SECURECHELLE® crinoline The SOMAIN SECURITE caged ladder is made of aluminum with stainless steel screws. It attaches to the concrete or metal siding.
Ladder in width 448 mm
Ref. : ECHN 60 Ref. : ECHN 61 Ref. : ECHN 62
1960 mm 2800 mm 3640 mm
Door + seal
Ref. : ECH 52
Aluminium Comply with standard : NF E 85 012 A+B
Ladder junction
Cage hoop
Pour mettre bout a bout les sections d’échelles
Élément de la crinoline
Ref. : ECHN 64
Hal door + seal
Ref. : ECH 53
Aluminium Comply with standard : NF E 85 012 B
Cage strap
Ref. : ECHN 67
Ref. : ECHN 65
Standard wall hook 210 mm
Adjustable wall hook 250 à 350 mm
Ribbed plug
Interface échelle / structure
Interface réglable échelle / structure
Ref. : ECHN 79
12
Ref. : ECHN 80
Longueur : 3190 mm
Ref. : ECHN 63
Bouchon à placer sur les extrémités des montants de l’échelle
Simple door
Ref. : ECH 51
Aluminium Comply with standard : NF E 85 012 A
Strap junction
Ref. : ECHN 66
Pour mettre bout à bout les sections de filant.
Diagonal brace
Ref. : ECHN 68
Soutient l’arceau inférieur de chaque volée
System: Echelle Standard:
EN ISO 14 122-4 & NF E85-016
SECURECHELLE速 crinoline SECURECHELLE 速 crinoline
allows safe access to height workzone: roofs of industrial buildings, public and private buildings, towers ....
off set comprises:
Hoop 3/4
Ref. : ECHN 72
Wide/narrow straight exit
Ref. : ECHN 73
Bouchons ECHN 63 inclus
Wide exit with step
Ref. : ECHN81 Bouchons ECHN 63 inclus
Hoop connection 3/4
Ref. : ECHN 71
Fixed platform
Ref. : ECHN 70
Wide exit with handrail
Ref. : ECHN 74 750 mm Ref. : ECHN 75 950 mm Ref. : ECHN 76 1175 mm (longueurs des paliers) Bouchons ECHN 63 inclus
Exit hoop
Ref. : ECHN 69
Step
Exit door
Width : 150 mm, come with baseboards Mandatory on standard NF E 85 016
Width 700 mm automatic closing Mandatory on standard NF E 85 016
Ref. : ECHN 78
Ref. : ECHN 77
13
System: Equipement
Partenaire
SECURILIA
®
Partenaire
SECURILIA® is a rancge of PPE adapted to use with SOMAIN SECURITE fall arrest systems.
Look for the PPE catalog Kit Standard
Kit temporary lifeline
Ref : KE04 Ref : KE01
1 Temporary Lifeline 1 Harness NEWTON 1 Lanyard I 80 1 Lanyard GRILLON 5 m 1 Carabiner OMNI 2 Carabiner WILLIAM
1 harness P30 3 carabiner AZ011T 1 double élastic lanyard ABM/LE101 1 bag AX011
Ref : PIXA 3
Multi-beam headlamp adapted for close-range work, for moving around and for long-range vision
ti Op
on
:w
Ref : AZ 011
Oval-shaped carabiner
EN 795 - B
h inc
Ref : PATRP Folding aluminium tripod
EN 397
Ref : VERTEX BEST
Comfortable ventilated helmet for work at height and rescue
EN 360
Aucune restriction
No restrcition
Ho 14
l nta rizo
er to v
l tic a
Ref : NCS7HO with 7 m cable EN 1891
ANTIPODES 10,5 mm
Ref : CST 105 Very resistant rope.
ANCHOR S 速 SECURIFIX
ANCHOR POINTS A rugged anchor point, guaranteed maintenancefree for 10 years. A solution compliant with European standards that provides personnel protection regardless of the circumstances. A single or double anchored system that will stand up over time, under repeated use, and in all weather. We regularly add new models to the SECURIFIX 速 anchor range.
Photo : Epicure Site : TIGNES
System: Ancrages Standard: EN 795 Classe A
SECURIFIX ® Customization :
SECURIFIX ® aluminum
Ref.: PA2
Plate
The SECURIFIX®alu can be thermo lacquered (RAL).
Dual molded aluminum anchor center-to-center distance 100 mm 2 M12 Dowel pins
Ships Ship Sh ip ps within with wi ith thiin in iin n 10-year guarantee
Rugged
Maintenance free
Flanging back plate
48
Ref.: S40
for anchoring to partition walls
hours
110 mm
Ships Ship Sh ip ps within with wi ith thiin in iin n
Ships Ship Sh ip ps within with wi ith thiin in iin n 10-year guarantee
Rugged
Maintenance free
Maintenance free
48 hours
48
hours
SECURIFIX ® galva Single anchor
SECURIFIX ® dual anchor stainless steel Plate
Ref.: PI3
mm 130
Ref.: PI5
Galvanized cast steel anchor. Attached by chemical bonding.
Dual cast stainless steel Ø12 center-to-center distance 100 mm 2 M12 Dowel pins
Ships Ship Sh ip ps within with wi ith thiin in iin n 10-year guarantee
Rugged
Maintenance free
48
hours
SECURIFIX ® cast stainless steel Single anchor
Ref.: PI2 Ships Ship Sh ip ps within with wi ith thiin in iin n Maintenance free
48
hours
Anchor point diameter 12 mm
Ref: ISPIT03P0
Galvanized cast steel anchor.
Attached with 1 M12 dowel pin.
16
Cast stainless steel anchor.
Attached by chemical bonding. Ø16 mm
Ships Ship Sh ip ps with wi within ith thiin in iin n Maintenance free
48
hours
1 m cable chain anchor.
Ref: AZ 420
Cable mounted at both ends. Protected by a plastic casing.
System: Ancrages Standard:
EN 795 Classe A
SECURIFIX® potelets Ready-to-use anchor studs. SECURIFIX ® studs are the most economical. They are available individually, or in lots of 50 with special terms of sale. These studs are ready-to-install. Available with a square or round section, the SECURIFIX ® stud can be attached by 4 chemical bonds or by flanging to a beam. It can also be clipped to an I-beam, welded plate girder, and other HEA columns.
Round stainless steel anchor stud
Ref.:SPS1
Stainless steel center-to-center distance 150 mm
Anchoring: 4 M12 Dowel pins Ships Ship Sh ip ps within with wi ith thiin in iin n
10-year guarantee
Rugged
Maintenance free
48
hours
Galvanized round anchor stud
Ref.: SPS21
Galvanized steel center-to-center distance 150 mm Anchoring: 4 M12 Dowel pins Ships Ship Sh ip ps within with wi ith thiin in iin n
500 mm tall to the ring center
Rugged
Maintenance free
48
hours
Square stainless steel anchor stud
Ref.: SPS11
Stainless steel center-to-center distance: 150 mm
Anchoring: 4 M12 Dowel pins Ships Ship Sh ip ps within with wi ith thiin in iin n
10-year guarantee
Rugged
Maintenance free
48
hours
Square galvanized anchor stud
Fixing plate
Ref.: SPS20
Galvanized steel center-to-center distance: 150 mm
Anchoring: 4 M12 Dowel pins Ships Ship Sh ip ps within with wi ith thiin in iin n Rugged
Maintenance free
48
hours
Sealing flange
17
System: Ancrages Standard: EN 795 Classe A
Ancrages spéciaux Notre offre s’étoffe de modèles adaptés a des demandes ou des surfaces spécifiques
Ancrage bac-acier
Sealed tray asphalt anchor
Ref.: LDV025 + LDV 023
Also exists for PVC seals
Stainless steel anchor + stainless steel plate 16 self-tapping screws
Ref.: LDV26
Stainless steel anchor 4 lever anchors
Retractable anchor
Zee-lock roofing anchor
In the “retracted” position
mm 95
Ref.: LDV-055
Ref. : PAY 360 JD
Attached by chemical bonding. Ø30 mm
4 zeelock clips
Cast stainless steel anchor.
18
Cast stainless steel anchor.
LIFELINES® SECURIFIL ther is a SECURIFIL® adapted to every environment and situation: outdoor, industrial areas, marine environments, corrosive environments, industry, agro-industry, pylons, ladders, etc. GUARANTEED 10 YEARS of peace of mind.
Installing durable, rugged, maintenance-free equipment ensures long-term safety. SOMAIN SECURITE lifelines hold up under stresses greater than those required by law without breaking. They are guaranteed maintenance-free for 10 years. Because of this: Horizontal lifelines without shuttle : Users dispute the effectiveness of a shuttle for it become a constraint. This type of system requires one shuttle per person and per lifeline type. If the shuttle breaks or “disappears,” it must be replaced for the manufacturer often waives all liability in case of use without the truck. SECURIFIL® an be used in all circumstances, and only the lanyard from the PPE and its snap hook are required for attachment.
Ships Ship Sh ip ps within with wi ith thiin in iin n
System: Lifeline Standard: EN 795 Classe C
10-year guarantee
Rugged
No truck
Maintenance free
48
hours
SECURIFIL® alu SECURIFIL® alu is the reference product on the personal fall protection market. Rugged, SECURIFIL® alu remains operational immediately after a fall by the user. It will provide safety for rescue workers and prevents the need for work to refurbish the system or the roof. SECURIFIL® alu is guaranteed for 10 years. This guarantee can be renewed for 10 years after a simple inspection by our technicians. This system can be installed in all types of work areas: flat roofs, roofs, facades, etc.
Aluminum swivel end
Wrist joint
Aluminum shock
Ref.: A6
Ref.: A5
absorber with eye
Adjustable upon assembly
Aluminum end point anchor. Swivels before tightening the anchor screws.
adapts to our standard studs.
Aluminum intermediate part
Ref.: A4
Placed regularly along a lifeline, it reduces the deflection of the cable during a fall. every 15 meters max.
Ref.: C21
Stainless steel.
20
It protects the cable by absorbing stresses during a fall. Attached to an end point.
To be attached to a stud or connector plate.
1 lot of 1 heart-shaped thimble and 3 cable clips
Ref.: D10
1 lot of 1 heart-shaped thimble and 3 cable clips
Ref.: C21
Stainless steel.
Turnbuckle eye / stainless steel frame
Ref.: D3
Allows adjustment of cable tension upon attaching the line. Made of stainless steel. The eye side attaches to an end point, and the frame side attaches to the cable
Stainless steel cable
Required poster
Ø 10 mm
1 for each access to the SECURIFIL®
Ref.: C11
Ref.: AO
Ships Ship Sh ip ps within with wi ith thiin in iin n 10-year guarantee
Rugged
No truck
Maintenance free
48
hours
System: Lifeline Standard:
EN 795 Classe C
SECURIFIL® alu Ref. : A1
Ref. : A5 Ref. : D3
Ref. : C31
Ref. : A4
Ref. : C21
Ref. : D10
Can be adapted to any structure type. Free customized estimate. Certified for 3 persons and more on request.
21
Lifeline System: Standard: EN 795 Classe C
Interfaces SECURIFIL® System supports a huge load.
To be granteed by a control organism, the interface devices must be sized in relation to the efforts they support in case of a fall.
20
0
m
m
466 mm
Standard fasteners are stainless steel or galvanized steel. The end posts and angle are reinforced by a gusset plate specially designed to facilitate the installation of the seal. All the posts can be powder coated to any RAL color of your choice.
End post Wrist joint post
Ref.: SE10 / SR10 End post painted stainless steel 4 M16 Dowel pins
Stainless steel double adapter plate
Ref.: S43
Galvanized steel version
Ref.: S44
For SECURIFIL® uptake or crossing by supporting 2 parts on the same stud.
Stainless steel angle cleat
interior or exterior angle
Ref.: S21
Galvanized steel version
Ref.: SG21
Wrist joint support 2 M12 Dowel pins
22
Intermediate post
End post
Intermediate post
Ref.: SI10
Wrist joint post
Ref.: SI20
4 M12 Dowel pins
End post galvanized steel
4 M12 Dowel pins
Intermediate post painted stainless steel
Ref.: SE20 / SR20
Intermediate post galvanized steel
4 M16 Dowel pins
Stainless steel wall cleat
Ref.: S20
Galvanized steel version
Ref.: SG20
Wrist joint support 3 M16 Dowel pins
Stainless steel adapter plate
Ref.: S4
Galvanized steel version
Ref.: SG4
This plate allows pinning or flanging an end piece to a wall. 4 M16 Dowel pins
80 X 80 stainless steel seal skirt
Ref.: S11
Delivered with a foam joint. Counters seepage along the tube (100 X 100 or 120 X 120)
System:
Lifeline Standard:
EN 795 Classe C
CERCLAGE de CHEMINEE To use chimneys as a lifeline interface. This strapping system fits all forms of chimneys without altering their structure (subject to validation by an engineering firm). Stainless steel spreader
Ref.: S501
Stainless steel corner protection
Ref.: S502
End or intermediate support piece
Ref.: S503
1 lot of 1 heart-shaped thimble and 3 stainless steel cable clips
cable fastening and cut
Wrist joint support
1 Cable
Ref.: C21
Ref.: S504
Ref.: C32
Stainless steel Ø 10 mm
Ref.: C11
Special interfaces Sometimes the standard SECURIFIL® interfaces cannot be adapted to the structure, or its configuration does not allow it to bear the stresses of a fall. In such cases our engineering department has over twenty years experience designing special supports adapted to the specificities encountered. Special studs
Flanging
Clamping
Designed by our engineering department and custom manufactured
Flanging consists of using a back plate and threaded rods to attach to a beam or a wall.
The wings of the metal beam are clamped with tabs (clamps) cut to fit.
23
Ships Ship Sh ip ps within with wi ith thiin in iin n
System: Lifeline Standard: EN 795 Classe C
10-year guarantee
Rugged
No truck
Maintenance free
48
hours
SECURIFIL® industrie A lifeline to equip covered industrial buildings: warehouses, silos, bridge cranes, etc. The anchoring parts for the SECURIFIL® industry were specially designed to be welded or bolted.
Ref.: C11
Ref.: IV20
Ref.: D31
Ref.: C31
Ref.: IV25
Stainless steel end point 304L
Ref.: IV10
Stainless steel end point M16 screw or weld
Stainless steel intermediate part 304L
Ref.: IV15
Ref.: C21
Ref.: D11
1 lot of 1 heart-shaped thimble and 3 cable clips
Ref.: C21
Stainless steel.
Stainless steel cable
Ref.: C11
Stainless steel intermediate part for passage without disconnection.
Ø 10 mm
M12 screw or weld
Stainless steel frame shock absorber
Ref.: D11
Cable fastening and cut
Ref.: C31
Protects the structure in case of falls
Ø 10 mm
Entirely of stainless steel
Turnbuckle frame / stainless steel frame
Ref.: D31
Allows adjustment of cable tension after assembly.
Required poster
A special version made of 316L stainless steel is available for extremely aggressive environments
24
Ref.: AO
1 for each access to the SECURIFIL®
Ref.: IV10
Ships Ship Sh ip ps within with wi ith thiin in iin n 10-year guarantee
Rugged
No truck
Maintenance free
48
System:
hours
Lifeline Standard:
EN 795 Classe C
SECURIFIL® préfa Specially designed for lattice girders or roofs with I-beam, IPE, or angle beam framework and other metal structures.
Ref.: G01
SECURIFIL® prefab can be installed very rapidly as the openings in the roof are reduced and the seal is restored with readyto-install rubber joints.
Ref.: G03
SECURIFIL® prefab is a reliable lifeline for especially light structures. SECURIFIL® prefab can be adapted to any girder width or thickness.
Attachment by flanging
Attachment by clamping
Ref.: G02 Prefab galvanized end point
Prefab energy shock absorber
Ref.: G01
Ref.: G02
Attached to the top of the end posts.
Attached to the base of the end posts.
Galvanized steel equipped with rollers to guide the cable in a horizontal position.
Absorbs stresses during a fall. The “tightening yoke” keeps the cable in place.
Aluminum intermediate part
Prefab swivel anchor
Placed regularly along a lifeline, they reduce the deflection of the cable during a fall.
The collar keeps the tube in a vertical position the anchoring feet (flanging or clamping) can be turned to adapt to the slope of the trusses.
Ref.: A4
every 5 meters max.
Ref.: G03
Sold in lots of two
Prefab intermediate support
Ref.: G04 / RA0
For the SECURIFIL® aluminum intermediate part
Seal
Ref.: G07
Flexible joint for round tubes.
Bolted to the top of the intermediate posts.
25
System: Lifeline Standard: EN 795 Classe C
Ships Ship Sh ip ps within with wi ith thiin in iin n Maintenance free
48
hours
SECUROPE A lifeline for metal deck roofs. Deformable, it is recommended for metal covers or when the automatic passage of intermediate parts is required from a distance.
Automatic remote use Set directly over steel tray Set directly on isolated rooďŹ ng
26
Ships Ship Sh ip ps within with wi ith thiin in iin n Maintenance free
48 hours
System: Lifeline Standard:
EN 795 Classe C
SECUROPE Components
Stainless steel intermediate anchor
Ref.: LDV004
The upper component over which the cable passes is mobile and acts as a shock absorber in case of falls.
Terminal anchor
Ref.: LDV002
Spring shock absorber
Ref.: LDV032
Spring and Polyurethane
Traveler
Stainless steel cable
Required poster
This traveler is automatically locked to the cable by attaching the snap hook.
Ă&#x2DC; 8 mm
1 for each access
Ref.: LDV001
Ref.: LDV005
Ref.: LDV007
Anchor types 6
5
4
4
6
D
Anchor for zinc with raised edges
Anchor for Hot Tray
Adjustable gap
For PVC/asphalt cover
Ref.: LDV017
1
Ref.: LDV017
9 m max. C
End point and corner anchors for metal deck
Intermediate anchor for metal deck
Wave center-to-center distance: 210-250-275-300-330 mm
B Wave center-to-center distance: 210-250-275-300-330 mm
Ref.: LDV023
Ref.: LDV036
Item 1 A 2 3 4 5 6
Qty 1 2 3 1 1 1
Part Nr. LDV002 LDV016 LDV032 LDV009 LDV005
BILL OF MATERIAL UK description D Hot deck roof Toiture bac ch Ancre terminale Ancre terminal 27 Multipost with bituminous collar Multipost avec Energy absorber assembly with spring Absorbeur d'ĂŠn Crimping ring with threaded end Bague de serti 7x7 8 mm stainless steel cable Cable 7x7 8 m
Ships Ship Sh ip ps within with wi ith thiin in iin n
System: Lifeline Standard: EN 353 -1 et -2
10-year guarantee
Rugged
Maintenance free
48
hours
SECURIFIL® verticale SECURIFIL® vertical is a lifeline designed to secure vertical pathways. It can be adapted to all types of tubes and angle beams, as well as to concrete
On tube
The user attaches his or her harness to the shock absorber on the traveler. The latter will lock in case of downward vertical movement and holds the user.
On concrete
Ref. : E14 Ref. : E24 Ref. : D12
End point for tubes
Ref.: E14
square <90 mm round <60 mm
End point for concrete
Ref.: E24
Lower turnbuckle for vertical lifeline
Ref.: E13
Ref. : E22
Attached to the lower end of the lifeline.
Ref. : E15 Adjustable cable guide for tubes
Ref.: E15
square <90 mm round <60 mm
Cable guide for concrete
Ref.: E22
Stainless steel cable
Ref.: C1
Ref. : H01
Ø 8 mm
Ref. : E13 Mobile fall protection + 2 snap hooks and shock absorber.
Ref.: H01
It locks the cable during a fall.
28
Stainless steel vertical shock absorber
Counter weight
Placed between the cable and the upper end, it absorbs the stresses on the structure during a fall.
It is used in place of the assembly: lower end and turnbuckle. The SECURIFIL® vertical meets the EN 353-2 standard
Ref.: D12
Ref.: E23
Ref. : E24 Ref. : E14
Ships Ship Sh ip ps within with wi ith thiin in iin n 10-year guarantee
Rugged
Maintenance free
48
hours
System: Lifeline Standard:
EN 353 -1
SECURIFIL® éolienne A vertical Lifeline for ladder with a central cable. Available in alu/galva et alu/inox.
All stainless steel version available Ref. : EG1
Upper end point
Lower end point
In aluminum.
In aluminum. Attached to one bar and locked with a screw
Ref.: EG1 Ref. : EG11
Attached to three bars and locked by a pin
Stainless steel frame eye turnbuckle
Ref. : EG5 Galvanized steel
Ref.: EG2
1 lot : 2 cable clips and 1 heart shaped thimble
Ref. : EG6
Galvanized Shock absorber
Ref. : EG3 Galvanized steel
Galvanized seel cable
Ref. : EG8 somain Ø 8 mm
Galvanized steel Ø 8 mm
Ref. : EG6
Ref. : EG5 Ref. : EG2
Mandatory sign
Sable fastening alu
1 per each access to the
Ø 8 mm
Ref. : EG9
SECURIFIL®
Ref. : EG11
Mobile fall arrest for galvanized cable + 1 carabiner-
Ref. : H04
29
System: Lifeline Standard: EN 795 Classe D
Ships Ship Sh ip ps within with wi ith thiin in iin n Maintenance free
48
hours
SECURILIGNE® tubalurail SECURILIGNE® tubalurail is an extruded aluminum tube with an integrated rail.
Flat Ref. : R12
This exclusive section developed by SOMAIN SECURITE can be used for many potential applications.
Ref. : R02
Compatible with standard SECURILIGNE® trucks.
Ref. : R21
On the under side, bracket and flat: it avoids using the support tube and allows spacing of 3 meters between each anchor.
On the underside Ref. : R21
Ref. : R02 Ref. : R10 La barre d’échelle est un point d’ancrage EN 795 A
Tubalurail section
Upper stainless steel truck
An extruded aluminum section with integrated rail.
On rollers, it travels at a distance and without strain over the entire rail.
Ref.: R20
30
Ref.: R12
Stainless truck
steel
Ref.: R10S
underside
For use on the underside, this truck mounted on roller bearings follows the user without strain.
Anchor foot
Ref.: R21
10-year guarantee
Rugged
Maintenance free
System: Lifeline Standard:
EN 795 Classe D
SECURILIGNE ® rail SECURILIGNE® rail is a lifeline designed to equip an area under a ceiling such as a warehouse, depot, or industrial building.
The rail is available in aluminum or stainless steel. The truck can be attached with an automatic safety block that immediately locks in case of a fall. The rail can be welded to a steel tube. The assembly is suspended by “uprights” attached to the structure to avoid interference (girders or conduits). Stainless steel underside truck
Ref.: R10
On roller bearings and a silent-block, this truck follows the user without strain and will lock in case of fall.
Automatic safety block
Rotary switch
Ref.: CR 200
Ref.: R07
It locks immediately in case of a fall.
Allows rail crossings. Can be remotely operated by the user.
Junction plate
Intermediate rail plate
For anchoring on the underside in Concrete
For anchoring on the underside in Concrete
Ref.: R03
Stainless steel rail
Ref.: R01
Ref.: R04
Aluminum rail
Ref.: R06
Spans Spans available depending upon the size of the tube (ep: 4 mm):
Rail truck stop block
Ref.: R02
Made of stainless steel
Mandatory sign
1 for each access to the SECURILIGNE ®
Ref.: A0
a in mm
b in mm
Span
100
100
3m
200
100
6m
250
100
9m
300
100
12 m
For lanyardr spans: consult us. 31
RĂŠalisations
32
RĂŠalisations
33
Flashcode vers google map
Through its three subsidiaries, our group manufactures equipment for industry and construction. Feel free to contact us!
www.denis-somain-com
www.deni-sertac.com
Sheet met al work Engineering f irm Mechanical construc tion
Design and produc tion of storage and handling systems f or bulk powdered materials
www.denis-protech.com Industrial Painting special coatings
The technical aspects and appearance of the products and equipment described in this document, as well as its usage, may be upgraded or modified at any time. Their description shall not be contractual in any case.