Benjaminortega comprehensive work sample by Benjamin N. Ortega

Architectural intern application document Benjamin N. Ortega 505-699-2304 bno606650@gmail.com Comprehensive work sample

Benjamin N. Ortega Age: 27y Gender: Male E-mail: bno60650@gmail.com Telephone: 505-699-2304 Address: P.O. Box 4254 Santa Fe, NM 87502 Online Portfolio: www.issuu.com/ortebab Education: School of Architecture and Planning at the University of New Mexico http://www.saap.unm.edu B.A. Arch_Winter2009 M.Arch_Spring2013 Awards: Recipient of the AIA Henry Adams school medal and certificate 2013 Runner up for the UNM medical schoolâ&#x20AC;&#x2122;s 50th Anniversary memorial competition 2012 Runner up for the Design Santa Fe: Next Nest 2013 at SITE Santa Fe Work Experience: University of Alaska Anchorage: Term Assistant Professor in the AET Department http://www.uaa.alaska.edu/cdt/academics/architectural-engineering-technology/ September 2014-May 2015 Course listings: AET 101, AET 102, AET 181 Instructed lecture/CADD courses focused on technical drafting methods for Architectural design and a course introducing materials and construction methods. EC3_Edwin Chan Architect: Design Consultant http://edwinchan.us June 2014-September 2014 Design consultant for the 1st Phase of the Guggenheim Helsinki Competition. Roger Sherman Architecture & Urban Design: Design Consultant http://www .RSAUD.com January 2014-June 2014 Site analysis presentation development. Facilitated Digital drawings of concepts and designs in corroboration with Utile, Inc. Architecture + Planning for a three corridor Urban Design study in Long Beach California. Antoine Predock Architect PC: Part-time architectural intern and studio maintenance assistant http://www .predock.com June 2012-May 2013 Worked on renderings and design development for two international competitions New National Stadium of Japan_2011 Solar Innovation Museum of Dubai_2012 Kramer E. Woodward Architects: Part-time architectural intern http://www.kewarchitects.com December 2011-2014 Worked on various architectural development projects focused on prefabrication Produced shop drawings for a patented build system & graphics for a winning design competition entry. (link below) http://santafeinteriordesignerspresents.com/design-lab-awards/ University of New Mexico: Instructor and course developer http://www.ce.unm.edu January 2013-July 2013 Course development & instruction for adolescents 12-17 years of age Course listing: 3d printing & laser cutting: Introduction to digital fabrication for teens FabLab ABQ: Intern digital fabrication technician February 2009-June 2010 Introduced to methods and techniques of digital fabrication using CNC milling, lasercutter and 3d printing technology by Kenji Kondo.

+ Software: Advanced: Rhinoceros 3d modeling + grasshopper plugin Adobe (Photoshop, Illustrator, InDesign) V-Ray: Diagrams + Renderings Intermediate: Revit Architecture AutoCAD 2d drafting/annotation & 3d modeling Sketch-up Adobe (Premiere & Flash) Novice: Microsoft office suite Hardware: + Advanced: ABS plastic 3d printing of critical components for prototypes Physical working models using wood and other wood by-products Digital photography Intermediate: 3 and 5 axis CNC milling sketching Novice: Presentation models

Statement of Intent Benjamin hopes to be involved in an architecture/urban design firm that addresses on the front end the integration of urban, landscape, environmental, programmatic and structural issues that are associated with architectural solutions. Using Integrated design processes, a studio that participates with this design methodology reduces production time and increases design time. Using combinatory design processes generate multifaceted architectural solutions. Ben wants to be involved in the communication and execution of drawings that are needed to produce a construction document set. Only having participated in the schematic design phase, Ben is excited to work with a team and learn how further stages of a projects development are accomplished.

Thesis project: Urban nomad international hostel

Benjamin N. Ortega_ADG2015

Arctic Design Group symposium submission. Located on the Arctic circle in Alaska south of the Brooks mountain range.

Research Trajectory

Field

Gugenheim Helsinki Competition Phase I In collaboration with Edwin Chan Architect

R A P K

A Z

12 2 m

T E

R E

E L IS A U N R I C RM

H R

Fine Dining Restaurant

+21.1

Harbor Gallery Flexible Gallery Flexible Gallery

+15.1

+9.1

+15.1

Museum Shop

+9.1

Salon Gallery

Cafe Multi-Purpose Auditorium

Kunsthalle Gallery

+3.1

Exhibition/Gallery Diagram

Museum Amenitites Diagram

Dining Terrace +21.1

+21.1

3-4 levels

SculptureTerrace

+15.1

Urban Connector Podium Market Square Terrace Winter Garden +9.1

2-3 Levels

+15.1

+9.1

1-2 Levels

Waterfront Promenade Plaza

+3.1

Terraces And Winter Garden Diagram

Atrium Diagram

w m

5.4

5.4 5.3

5.3

4 9

11 12

7.3

m w

1 5.1

2 3

2.8

2.7 7.1

2.5 2.4

2.5

ild

2.3

2.12

2.1

ort

cti

2.13

st-

We s

2.9 2.11

ec tio nN

2.2

ng S

ing

Bu ildi

h-S ou th

7.2

5.2

Envisoning 4th Street, Long Beach, CA. A bulb out parklet is shown. In collaboration with Roger Sherman architect urban design

Villa in Thailand for client Jack Wallace. In colloboration with Scott Carleson

Slider Structural System. Parts and assembly isometric drawings. In collaboration with Kramer Woodard Architect.

Detail Sample

7.3

Beam: 90 x 120 mm @ 910 mm

192.0000

galvanized color steel sheet t = 0.4 mm flat seam roofing asphalt roofing 22 kg structural plywood t = 9 mm

260.0000

117.0000

wooden sash drehkipp double glazing PW6.8+A12+FL5

lauan plywood t= 5.5mm butting wax finish ceiling joist 30 x 45 mm @ 303mm glass wool t = 100 mm

58.0000

7.5000

60 x 150 82.5000

30.0000

75.0000

spruce t = 30 mm

24.5000

75.0000

15.0000

56.0000

76.5289

65.0000

34.5

75.0000

60.0000 34.5000

65.0000

67.6000

45.0000

134

H = 485

2.5 floor level

30.0000

5.0000

4.0000

1405.0000

galvanized steel plate t = 0.6 mm

CH = 2100

ceramic fiber t = 18 mm bedroom

plaster

52.5 x 150

plaster

wooden sash fix double glazing PW6.8+A12+FL5 plaster

Alcove bed

25.0000

56.0000

mortar

56.0000

65.0093

65.0000

mortar

134

lauan plywood t = 5.5 mm sandpapered texture, wax finish structural plywood t = 12 mm floor joist 45 x 60 mm @ 455 mm rigid insulation foam t = 30 mm

galvanized steel plate t = 0.6 mm ceramic fiber t = 18 mm

reforming asphalt waterproofing t = 4 mm

100.0000

1.5 floor level V GL + 715 30.0000

105 x 180 105 x 180

161.0000

ceramic fiber t = 18 mm 30.0000

247.0000

194.0000

298.0000

100.0000

floor height V GL + 280 26

plaster 65.0000

105 x 105

galvanized steel plate t = .6 mm

mortar draft window sleeper: 90 x 180 mm preservative treatment

60.0000

V GL Âą 0

150.0000

134.0000

56.0000

reforming asphalt waterproofing t = 4mm

galvanized steel plate t = 0.6 mm 65.0000

25.0000

plaster mortar

15.0000

17.0000

20.0000

40.0000

20.0000 90.0000

70.0000

40.0000

15.0000

Vent Space

Waterproof tape

12.5000

50.0000

55.0000

240.0000

149.9644

15.0000

5.0000

150.0147

eaves: galvanized steel sheet t = 0.4 mm standing flat seam roofing asphalt roofing 22 kg/m structural plywood t = 15 mm rafter 30 x 30 mm @ 300 mm rigid insulation foam t = 30 mm steel plate t = 3.2 mm steel pipe 100 x 50 x 4.5 mm

Beam 60 x 240 mm 14.9761

301.0000

1059.0000

Waterproof Tape

44.9500

51.9500

40.0000

14.9536

30.0000

240.0000

150

60.0000

15.0000

5.0000

galvanized steel sheet t = 0.4 mm flat seam roofing waterproof water resistant plasterboard t = 12.5 mm

Steel pipe 100 x 50 x 4.5 mm 150.0000

71.0000

50.0000

Larch plywood t = 15mm

30.0000

Lauan Plywood t = 5.5 mm bees wax finish Structural Plywood t = 15 mm

Opening Support Flat bar 25 x 200 mm 5.5000

15.0000

30.0000

240.0000

150

Opening support: Flat bar 25 x 200 mm