Magnus Power

MAGNUS POWER ͸ΝΠΓΒΝ͑΁ΠΨΖΣ͑΄ΦΡΡΝΪ͑΄ΡΖΔΚΒΝΚΤΥΤ

POWER SPECIALISTS FOR AVIATION AIRPORTS AND AEROSPACE, COMMERCIAL AND MILITARY Design, Engineered and Manufactured in Great Britain.

At Magnus Power we take great pride in being a British Company, producing high quality and competitively priced products for international markets. Our technology, founded in manufacturing for the Oil and Gas industries, is reliable and robust.

We produce: • Frequency Converters, • Ground Power Units, • Uninterruptable Power Supplies • Emergency Lighting Inverters • Electrical Power Systems Magnus Power has over 25 years specialist knowledge in the design, engineering and manufacturing of Specialist Power Supplies, and with our experienced team of consultant engineers, we can also assist in producing a bespoke power supply or frequency converter to your exact requirements.

We can also produce white label solutions, branded with your corporate identity for your organisation.

Our Frequency Converter Range

We can offer an excellent range of 400hz frequency converters to suit your application, whether you are a testing or repairing galley equipment, lighting or seating, for on board aircraft use, we will have a 400hz supply for you.

We can offer a small 1kw fixed output 400hz converter, this is a very compact unit(which weighs less then 10kgs) or our LF3-400, this has a 3kw 3 Phase Output, we have found this unit very popular with aircraft seating manufacturers If you are looking for a frequency converter to power the whole workshop or to provide 400Hz for hangars with our ME3 range we can offer a unit from 10kw to 200kw

LF1- 400 3KW 115V 400Hz Single Phase output, at up to 3kVA The LF1-400-3kW frequency converter offers low price fixed voltage single phased sine wave output. A transformer ensures full isolation between the output voltage and the incoming supply, and the output neutral may be earthed externally if required. The unit is fully protected against overcurrent and temperature conditions, LF1-400-3kW are supplied with input and output cables.

This LF1-400-3kW is normally supplied as a free standing bench top unit; but can also be built in a rack mount configuration if required at no extra cost.

A support shelf or bracket would be required when the rack mounting option is specified: these are not supplied with the unit, as their dimensions will depend on the arrangement of the cabinet or rack.

Input Requirement 230V Single Phase, +10% / -6%, 45-66Hz Output Capability 115V 400Hz +/-1Hz, at up to 3kVA (26A max) Overcurrent trip at >3600VA Short circuit and overtemperature protection Load Power Factor 0.5 lag to 0.5 lead at full load With linear load, line regulation +/-1%, load regulation +/-1% THD better than 5% and full-load efficiency >80% Controls, Indications & Connections Input On/Off switch and indicator, Output On/Off switch Output Voltage and Output Current analogue meters Over Current and Over Temperature indicators IEC inlet connector, twist-lock output connector Input and output cables supplied Operating Environment 0 to 40 degrees, 0-90% non-condensing Size & Weight 440 wide x 590 deep x 145 high (3U in 19 inch rack), 25kg

LF3 - 400 115/200V 400Hz Three Phase output, at up to 3kVA A transformer ensures full isolation between the output voltage and the incoming supply and the output neutral (star point) may be earthed externally if required. The unit is fully protected against overcurrent and overtemperature conditions. Input power and output cable supplied.

This unit is normally supplied as a free standing bench top unit; but the LF3 can also be built in a rack mount confi guration if required at no extra cost. A support shelf or bracket would be required when the rack mounting option is specifi ed: these are not supplied with the unit, as their dimensions will depend on the arrangement of the cabinet or rack.

Input Requirement 230V Single Phase, +10% / -6%, 45-66Hz Output Capability 115V 400Hz +/-1Hz, at up to 3kVA (26A max) Overcurrent trip at >3600VA Short circuit and overtemperature protection Load Power Factor 0.5 lag to 0.5 lead at full load With linear load, line regulation +/-1%, load regulation +/-1% THD better than 5% and full-load efficiency >80% Controls, Indications & Connections Input On/Off switch and indicator, Output On/Off switch Output Voltage and Output Current analogue meters Over Current and Over Temperature indicators IEC inlet connector, twist-lock output connector Input and output cables supplied Operating Environment 0 to 40 degrees, 0-90% non-condensing Size & Weight 440 wide x 590 deep x 145 high (3U in 19 inch rack), 25kg

LP1 An easy to use SFC, with 1kVA of variable single phase output

This data sheet describes the single phase LP Series frequency converter, with variable output voltage and frequency. Output frequency can be set to any value between 45Hz and 1kHz. Output voltage is variable from zero to maximum in two ranges, usually 0-135V and 0-270V. Output current capability is doubled on the lower range.

Control of the unit is all touch button interface, with a clean concise LCD screen.

The values chosen by the operator are stored by the microprocessor when the converter is switched off, and are available for immediate use on future occasion.

Values can be adjusted at any time whilst live online or offl ine.

The output is a pure sine wave, and is fully protected against over current conditions. In addition to the built-in output protection.

The LP1 can be supplied with an RS232 remote connector which can be connected to any PC operating on a windows platform allowing full control of the unit remotely.

This unit is available in a 19” rack mounting version or a bench unit.

Input 115V or 230V Single Phase, +10% / -6%, with automatic selection of voltage 45-66Hz (400Hz to special order) Output Capability 45-1kHz in steps of 1Hz Accuracy +/- 0.1Hz Low Range 0-135V, 7.4A max High Range 0-270V, 3.7A max Overload Capability Overcurrent trip after 1 second, at >110% full load Immediate power limiting, at >2kVA Admissible Load Power Factor 0.5 lag to 0.5 lead at full load Output Protection Variable overcurrent, short circuit, overtemperature Regulation Better than 1% for 0-100% rated load Better than 0.2% for 10% line voltage change Efficiency >70% at full load Controls Input On/Standby Output On/Off switch Soft touch push button for control of all functions Indications Alpha-Numeric Display of all settings Input On and Output Ready indicators Output Waveform Sinusoidal, THD better than 5% at full load Stability Better than 1% over 24 hours after 1 hour warm-up Isolation Full, by transformer coupling of output Electromagnetic Compatibility CE-marked to European requirements Operating Environment 0 to +40 degrees, 0-90% non-condensing <65dBA ambient noise Storage Environment -15 to +70 degrees, 0-95% non-condensing

Size & Weight 430mm wide x 375mm deep x 132mm high (3u), 22 kg This specifi cation is for a standard converter. Units with special voltage ranges will change output current capability.

LP3 An easy to use Frequency Converter, with 3kVA of variable Three Phase output The standard unit has three phase output at up to 3kVA and can operate from a European 230V single phase supply.

Output frequency can be set by the user to any value between 45Hz and 1000Hz. Output voltage is variable from zero to a maximum in two ranges, 0-135/234V and 0-270/468V. Output current capability is doubled on the lower range.

Control of the unit is all touch button interface, with a clean concise LCD screen. The values chosen by the operator are stored by the microprocessor when the converter is switched off, and are available for immediate use on future occasion.

Values can be adjusted at anytime whilst live online or offl ine.

The output is a pure sine wave, and is fully protected against over current conditions.

In addition to the built-in output protection.

The LP3 can be supplied with an RS232 remote connector which can be connected to any PC operating on a windows platform allowing full control of the unit remotely.

This unit is available in a 19” rack mounting version or a bench unit.

Delivered equipment may differ slightly from this description, either as a result of continuous product development, or in the event of any errors not detected when this document was last updated.

Input 230V Single Phase, +10% +/- 6%, 45-66Hz Output Capability 45-1000Hz in steps of 1Hz, accuracy +/-1Hz Low Range 0-135/234V (Ph-N/Ph-Ph) 7.4A max High Range 0-270/468V (Ph-N/Ph-Ph) 3.7A max Current ratings are for each phase Overload Capability Overcurrent trip after 1 second, at >110% full load on any phase Immediate power limiting, at >2kVA on any phase Admissible Load Power Factor 0.5 lag to 0.5 lead at full load Output Protection Overcurrent, short circuit, overtemperature Regulation Better than 5% for 0 - 100% Rated Load Better than 0.2% for 10% line voltage change Effi ciency >70% at full load Controls Input On/Standby Output On/Off switch Soft touch push button for control of all functions Indications Alpha - Numeric Display of output settings Input On and Output Ready indicators Output Waveform Sinusoidal, THD better than 5% at full load Stability Better than 1% over 24 hours after 1 hour warm-up Isolation Full, by transformer coupling of output Electromagnetic Compatibility CE-marked to European requirements Operating Environment 0 to +40 degrees, 0-90% non-condensing <65dBA ambient noise Storage Environment -15 to +70 degrees, 0-95% non-condensing Size & Weight 430mm wide x 375mm deep x 132mm high (3u), 22 kg

LDC 28 Universal AC Input/ Full Range Power Factor corrected to EN61000-3-2 class D Approved to UL/CUL/ TUV/CB/CE & Class B emissions

The New 28V DC power supply unit is the perfect partner for our range of frequency converters. This unit is normally supplied as a free standing bench top unit; but the LDC-28 DC can also be built in a rack mount confi guration if required at no extra cost.

A support shelf or bracket would be required when the rack mounting option is specifi ed: these are not supplied with the unit, as their dimensions will depend on the arrangement of the cabinet or rack.

Input Requirement 90 – 264Vac full range, 47~ 63Hz Output Capability Maximum continuous output 28v DC 30A (50A version available upon request) Overvoltage, Overcurrent and overtemp protection all reset by operation of output off switch Controls,Indications &Connections Input On/Standby switch and indicator Output On/Off switch and indicator Output voltage and output current (LCD Display) IEC inlet connector Input and output cables supplied Operating Environment 0 to +40 degrees 90% non condensing <65dBA ambient noise Size & Weight 440 wide x 270 deep x 89 high (2u in 19 Inch rack) 6kg

CONTACT DETAILS Magnus Power UK 29 - 30 Brunel Rd, ChurchďŹ elds Industrial Estate St Leonards on Sea East Sussex.

England TN38 9RT Tel: 01424 856170 Tel: 01424 856180 Fax: 01424 856171 Email: magnuspower.sales@akersolutions.com Email: magnuspower.service@akersolutions.com

MAGNUS POWER ͸ΝΠΓΒΝ͑΁ΠΨΖΣ͑΄ΦΡΡΝΪ͑΄ΡΖΔΚΒΝΚΤΥΤ

Established since 1986 Magnus Power, we are recognised as a market leader in specialist power suppliesto the Aviation, Aerospace and Airport Industries.

Our Frequency Converters, Ground Power Units and Specialist Power Supplies are used globally by a number of recognisable international brands who place their trust in our robust and reliable technology to keep their businesses powered and operational, frequently in time critical situations where it is essential to ensure smooth and continuous power.

www.magnuspower.co.uk