OZCO Project #378 - Patio Pergola with Five 4x6 Posts

OZCO Project #378 Patio Pergola Five 4x6 Posts

OZCO Project #378 - Patio Pergola Five 4x6 Posts

V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/27/2016 . This information is updated periodically and should not be relied upon after 2 years from 4/27/2016 . Please visit OZCOBP.com to get current information.

1

=

=

2850 112.19 2456 96.69

2456 96.69

2743 108.00 5486 216.00

Overview-Front OZCO Project #378 - Patio Pergola Five 4x6 Posts

V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/27/2016 . This information is updated periodically and should not be relied upon after 2 years from 4/27/2016 . Please visit OZCOBP.com to get current information.

2

425 16.73

206 8.13

152 6.00 typ

257 10.13

305 12.00

Overview-Top OZCO Project #378 - Patio Pergola Five 4x6 Posts

V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/27/2016 . This information is updated periodically and should not be relied upon after 2 years from 4/27/2016 . Please visit OZCOBP.com to get current information.

3

4674 184.00

1121 44.13

410 16.13

2656 104.56

3048 120.00

Overview-Right OZCO Project #378 - Patio Pergola Five 4x6 Posts

V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/27/2016 . This information is updated periodically and should not be relied upon after 2 years from 4/27/2016 . Please visit OZCOBP.com to get current information.

4

9 5 8 10

7

6

4

3

1

11

2

ITEM QTY. PART DESCRIPTION NO. NUMBER 4x6 Post 1 5 56608 Base 4x6 2 5 Cedar 4x6x96.00 Board 4" Standard 3 3.7 56618 Rafter Clip (RC-LS-4) Butt Joint 4 1 56613 Flush (BJF) Accent 1 56611 Truss (TA-LS) OWT Timber 0.08 56625 Screw 1-3/4" Truss Base 5 8 56645 Fan-T (TBF-T) Accent 1.5 56611 Truss (TA-LS) OWT Timber 0.08 56625 Screw 1-3/4" 4� Flush 6 5 56668 Inside 45 (FI45-LS-4) 4x8 7 2 Cedar 4x8x144.00 Board 4x4 8 10 Cedar 4x4x24.00 Support 4x8 9 1 Cedar 4x8x192.00 Board 2x2 10 56 Cedar 2x2x144.00 Board 4x6 11 13 Cedar 4x6x192.00 Board

Bill of Material OZCO Project #378 - Patio Pergola Five 4x6 Posts

V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/27/2016 . This information is updated periodically and should not be relied upon after 2 years from 4/27/2016 . Please visit OZCOBP.com to get current information.

5

QTY. 5 5 1 13 3 4 8

PART NUMBER 56608 56668 56613 56611 56625 56618 56645

5 2 2 1 13 56

4x6x8L 4x8x12L 4x4x10L 4x8x16L 4x6x16L 2x2x12L

DESCRIPTION 4x6 Post Base 4� Flush Inside 45 (FI45-LS-4) Butt Joint Flush (BJF) Truss Accent (TA-LS) OWT Timber Screw 1-3/4" 4" Standard Rafter Clip (RC-LS-4) Truss Base Fan-T (TBF-T) 4x6x8 4x8x12 4x4x10 4x8x16 4x6x16 2x2x12

Material List OZCO Project #378 - Patio Pergola Five 4x6 Posts

V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/13/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/13/2018 . Please visit OZCOBP.com to get current information.

6

56618 56611

56604

56625

56668 56645

OZCO OZCO Project #378 - Patio Pergola Five 4x6 Posts

V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/27/2016 . This information is updated periodically and should not be relied upon after 2 years from 4/27/2016 . Please visit OZCOBP.com to get current information.

6

How To Draw an Arc Cutline: 1. locate center of arc and mark with push pin 2. attach string to push pin and pencil as shown 3. mark cutline 4. cut with appropriate saw pencil string push pin

cutline

How To Draw an Arc Cutline OZCO Project #378 - Patio Pergola Five 4x6 Posts

V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/27/2016 . This information is updated periodically and should not be relied upon after 2 years from 4/27/2016 . Please visit OZCOBP.com to get current information.

7

CL 20° if this instruction is too difficult, see "How To Draw an Arc Cutline" page

20.0° 16.7° 13.3° 10.0° 6.7° 3.3°

4649 183.02 4669 183.81

4613 181.62

4561 179.57 4492 176.84

4404 173.39 4674 184.00

Cutlist-Rafters OZCO Project #378 - Patio Pergola Five 4x6 Posts

V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/27/2016 . This information is updated periodically and should not be relied upon after 2 years from 4/27/2016 . Please visit OZCOBP.com to get current information.

8

0

83.64 81.46 79.27

107.66 105.48 103.29 101.11 98.93 96.74 94.56 92.37 90.19 88.01 85.82

133.87 131.68 129.50 127.32 125.13 122.95 120.76 118.58 116.40 114.21 112.03 109.84

CL

70° typ optional

optional cutting method: see Overview-Top page overhang dimensions. use chalkline or string to mark purlins, then cut while installed.

0

103.34

123.20

note purlins mount on centerline

15° typ option

Cutlist-Purlins OZCO Project #378 - Patio Pergola Five 4x6 Posts

V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/27/2016 . This information is updated periodically and should not be relied upon after 2 years from 4/27/2016 . Please visit OZCOBP.com to get current information.

9

Suggested Tools (others may be required) OZCO Project #378 - Patio Pergola Five 4x6 Posts

V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/27/2016 . This information is updated periodically and should not be relied upon after 2 years from 4/27/2016 . Please visit OZCOBP.com to get current information.

10

3353 132.00 1676 66.00 Locate desired center of structure

3229 127.14

48° 3048 120.00

3479 136.95

1524 60.00

29°

2743 108.00

5486 216.00

if site is not level, see Ozco Site Leveling instruction site OZCO Project #378 - Patio Pergola Five 4x6 Posts

V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/27/2016 . This information is updated periodically and should not be relied upon after 2 years from 4/27/2016 . Please visit OZCOBP.com to get current information.

11

(HCN) Tool Required 3/8" Driver

(OWT Timber Screw)

step 1 OZCO Project #378 - Patio Pergola Five 4x6 Posts

V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/27/2016 . This information is updated periodically and should not be relied upon after 2 years from 4/27/2016 . Please visit OZCOBP.com to get current information.

12

(HCN) Tool Required 3/8" Driver repeat on both sides of all outside posts (OWT Timber Screw)

step 2 OZCO Project #378 - Patio Pergola Five 4x6 Posts

repeat on both sides of center post V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/27/2016 . This information is updated periodically and should not be relied upon after 2 years from 4/27/2016 . Please visit OZCOBP.com to get current information.

13

(HCN) Tool Required 3/8" Driver

(OWT Timber Screw)

step 3 OZCO Project #378 - Patio Pergola Five 4x6 Posts

V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/27/2016 . This information is updated periodically and should not be relied upon after 2 years from 4/27/2016 . Please visit OZCOBP.com to get current information.

14

these rafters utilize 4 rafters clips each

this rafter utilizes 3 rafter clips

(HCN) Tool Required 3/8" Driver

step 4

see Overview-Top & CutlistRafters page for additional instruction

(OWT Timber Screw)

OZCO Project #378 - Patio Pergola Five 4x6 Posts

V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/27/2016 . This information is updated periodically and should not be relied upon after 2 years from 4/27/2016 . Please visit OZCOBP.com to get current information.

15

secure with nails or screws see Overview-Top & Cutlist-Purlins page for additional instruction

step 5 OZCO Project #378 - Patio Pergola Five 4x6 Posts

V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/27/2016 . This information is updated periodically and should not be relied upon after 2 years from 4/27/2016 . Please visit OZCOBP.com to get current information.

16

Ian's Concept 2x Stagger

2x Sandwich

4x

4x Beam Installation • 3 style choices • When 4x lumber not available or cost effective • see subsequent pages for details on each style see product installation instructions for hardware installation Ian's Concept

V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/14/2017 . Please visit OZCOBP.com to get current information.

1

polyurethane adhesive, clamp & nail no post cuts

3" nail as desired

2x Stagger Ian's Concept

V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/14/2017 . Please visit OZCOBP.com to get current information.

2

polyurethane adhesive, clamp & nail

nail as desired X Y

dato cut (2 sides)

Y

X - 1.75�

2x Sandwich Ian's Concept

V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/14/2017 . Please visit OZCOBP.com to get current information.

3

X Y

dato cut (2 sides)

Y

X – 1.75�

4x Ian's Concept

V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/14/2017 . Please visit OZCOBP.com to get current information.

4

multiple cuts approximately 1/4" apart to mark

mark ledge location

Y

pencil

remove pieces

set saw cut depth; start cuts 1/4" from top

Dato cut details Ian's Concept

V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/14/2017 . Please visit OZCOBP.com to get current information.

5