OZCO Project #532 Pergola or Pavilion Bench
single bench
Add value to your structure with a sitting bench! • Increases structural stability • Easy to install • Multi-functional
Project #310 (8x8 posts) shown This project serves as a guideline for all Pergola & Pavilion structures. Changes to bill of materai will be necessary to match your structure.
OZCO Project #532 - Pergola or Pavilion Bench
double bench
V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/27/2016 . This information is updated periodically and should not be relied upon after 2 years from 4/27/2016 . Please visit OZCOBP.com to get current information.
1
Material List
1
PART DESCRIPTION NUMBER 56615 Flush Inside 90 (FI-90) 56650 OWT Timber Bolt 6-8" 2" Timber Bolt Heavy Duty Washer 56680 (OWT-TBW-2) 56626 OWT Timber Screw 2-3/4"
1
4x8x10L 4x8x10
QTY. 1 2 1
2 1 3
ITEM PART NO. QTY. NUMBER 4x8 1 1 Cedar Board 2 1 56615 3
shown with OZCO Project #310 Pergola 4 •
Single Bench OZCO Project #532 - Pergola or Pavilion Bench
•
2
56650
0.25
56680
0.32
56626
DESCRIPTION 4x8x106.75 Flush Inside 90 (FI-90) OWT Timber Bolt 6-8" 2" Timber Bolt Heavy Duty Washer (OWT-TBW-2) OWT Timber Screw 2-3/4"
board length varies depending on structure. item 4 will be shown later in this document
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/12/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/12/2018 . Please visit OZCOBP.com to get current information.
2
Material List
2 4 2 1
PART NUMBER 56615 56650 56680 56626
Flush Inside 90 (FI-90) OWT Timber Bolt 6-8" 2" Timber Bolt Heav y Duty Washer (OWT-TBW-2) OWT Timber Screw 2-3/4"
2
4x8x10L
4x8x10
QTY.
2 1
ITEM QTY. PART NO. NUMBER 4x8 1 2 Cedar Board 2 2 56615 3
3 4 shown with OZCO Project #310 Pergola
• •
Double Bench OZCO Project #532 - Pergola or Pavilion Bench
DESCRIPTION
4
56650
0.25
56680
0.64
56626
DESCRIPTION 4x8x106.75 Flush Inside 90 (FI-90) OWT Timber Bolt 6-8" 2" Timber Bolt Heavy Duty Washer (OWT-TBW-2) OWT Timber Screw 2-3/4"
board length varies depending on structure. item 4 will be shown later in this document
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/12/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/12/2018 . Please visit OZCOBP.com to get current information.
3
56680
56615
56650
56626
OZCO OZCO Project #532 - Pergola or Pavilion Bench
V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/27/2016 . This information is updated periodically and should not be relied upon after 2 years from 4/27/2016 . Please visit OZCOBP.com to get current information.
4
Suggested Tools (others may be required) OZCO Project #532 - Pergola or Pavilion Bench
V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/27/2016 . This information is updated periodically and should not be relied upon after 2 years from 4/27/2016 . Please visit OZCOBP.com to get current information.
5
optional 4 screw installation; only 2 are necessary shown with OZCO Project #310 Pergola
level
(HCN)
set height as desired
Tool Required 3/8" Driver repeat step if installing double bench (OWT Timber Screw)
step 1 OZCO Project #532 - Pergola or Pavilion Bench
V2.00 - Installation Instructions, Specifications and Project Plans are effective 4/27/2016 . This information is updated periodically and should not be relied upon after 2 years from 4/27/2016 . Please visit OZCOBP.com to get current information.
6
Ian's Concept 2x Stagger
2x Sandwich
4x
4x Beam Installation • 3 style choices • When 4x lumber not available or cost effective • see subsequent pages for details on each style see product installation instructions for hardware installation Ian's Concept
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/14/2017 . Please visit OZCOBP.com to get current information.
1
polyurethane adhesive, clamp & nail no post cuts
3" nail as desired
2x Stagger Ian's Concept
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/14/2017 . Please visit OZCOBP.com to get current information.
2
polyurethane adhesive, clamp & nail
nail as desired X Y
dato cut (2 sides)
Y
X - 1.75�
2x Sandwich Ian's Concept
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/14/2017 . Please visit OZCOBP.com to get current information.
3
X Y
dato cut (2 sides)
Y
X – 1.75�
4x Ian's Concept
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/14/2017 . Please visit OZCOBP.com to get current information.
4
multiple cuts approximately 1/4" apart to mark
mark ledge location
Y
pencil
remove pieces
set saw cut depth; start cuts 1/4" from top
Dato cut details Ian's Concept
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/14/2017 . Please visit OZCOBP.com to get current information.
5