PRI_IFU_OccluSense_QS_EN_002_200110.qxp_Layout 1 Kopie 24.01.20 14:55 Seite 1
Quick Start Guide 1 PREPARATION
Make sure your iPad is connected to your wireless network and that your wireless network supports the 2.4 GHz (IEEE802.11 b/g/n) frequency. Have your WLAN password ready. Install the OccluSense®-iPad-App www.occlusense.com/install
2 INITIAL SETUP
In the OccluSense®-iPad-App select ‘Settings’ and tap on ‘Initial setup’.
Switch on the handheld. (press the pink operating button 1)
Your handheld first creates its own network (SSID) which is shown with the password (WEP) in the display.
Tap 'Start' in the OccluSense®-iPad-App to initiate the setup process and type the WEP password into the dialog box.
Confirm the following dialog with ‘Join’.
3 WLAN SETUP
Confirm the following dialog with ‘Yes’ to connect the OccluSense® handheld device with your WLAN.
A screen opens with three steps to be performed. Tap on ‘Next’ to start the process. Now enter your network name (the last selected SSID is suggested) and your WLAN password. Once the data has been entered, tap ‘Next’.
The OccluSense®-iPad-App establishes a connection to the handheld via this network. A successful connection between the handheld and the wireless network is indicated by green signal bars and the first 6 characters of the wireless network in the upper left corner of the handheld display. If the connection between the handheld and the wireless network has failed, the connection status is indicated on the handheld display by transparent signal bars. In this case reset the handheld (manual chapter 19.2) and start the initial setup again.
PRI_IFU_OccluSense_QS_EN_002_200110.qxp_Layout 1 Kopie 24.01.20 14:55 Seite 2
4 REGISTRATION OF THE SYSTEM Before registering your system, make sure you have an internet connection. We recommend to register your system immediately to ensure full functionality and extended use. If this will not be done, the system will automatically return to demo mode after 14 days. ®
To register your system, open the OccluSense -iPadApp.
! TECHNICAL REQUIREMENTS FOR THE WIRELESS LOCAL NETWORK (WLAN) • 2.4 GHz WLAN-Standard IEEE802.11 b/g/n (5 GHz is NOT supported) • No MAC filter activated (MAC = Medium Access Control) • DHCP server with two free IP addresses available OccluSense® is a network device - If you have any problems connecting the OccluSense® to your network, please contact your system administrator.
Tap on ‘Settings’ in the menu.
? SUPPORT Then go to ‘Handheld registration’. Fill in the registration form. Please fill in the following fields: Country, name, first name, street, postal code, city and your email address. Tap the ‘Register’ button to send your registration data to your e-mail address. A confirmation email will be sent to your email address, which you must open and confirm. Restart the OccluSense®-iPad-App. If your registration was successful, a green checkmark will appear in the OccluSense®-iPad-App.
help.occlusense.com Multilingual Phone Support Europe +49-221-98259010 The Americas +1 (844) 633-4002 Japan +81-50-3101-4161
PRI_IFU_OccluSense_QS_EN_002_200110
Your system is now registered and ready to use.