How-to
APPLY &
BASIC APPLICATION STEPS 1. The edge of the nail should be smooth; if necessary, use a GelMoment Nail File to gently file the nail. 2. Buff the nail surface well, including the corners. Only buff, but do not polish or shine. Buffing will help remove any natural oils from the nail surface, which can inhibit the adhesion of the Gel Polish. 3. Wipe the nail clean with GelMoment Nail Cleansers. Make sure nails are clean and dry before applying the Gel Polish. 4. Before applying, gently roll the bottle between the palms of your hands. Heavy shaking can produce air bubbles. 5. Apply a thin coat of Gel Polish. Avoid getting any polish on your skin or cuticles, as this can cause it to peel. For best results apply polish over the nail tips too. 6. Cure under your choice of GelMoment LED Lamp until it automatically turns off. *GelMoment Gel Polish will cure in 45-60 seconds, depending on the LED Lamp used.
Should you wish to add a second coat, repeat steps 5 & 6.
NOTE: Gel Polish is sensitive to LED and natural light and therefore cannot be left open near or come in contact with the LED Lamp, or be used in direct sunlight or outdoors. Doing so may result in premature curing of the unused polish.
34 Image provided by Independent Distributor: Allison Wright wearing Pink Feeeze.
