Wunderlich Accessories2009 by CYPRUS MOTO

English Edition

Catalogue Export 2009 Parts & accessories for all BMW models from 1993 onwards

e are happy and proud to present to you our new Export Catalogue 2009. Since the last catalogue came out in 2006 there have been many new bike models added by BMW, and subsequently many more parts have been developed by us. We have added the new models and their newly developed parts to the new catalogue; with over 650 pages and thousands of images, this is the most comprehensive catalogue of its kind. Why are accessories needed? Generally, BMW motorcycles are well equipped. Our aim though is to allow each model to be individualised so that the rider enjoys better riding comfort, added safety, improved appearance and increased riding fun. Our ERGO parts program is designed to substantially improve the riding comfort. ERGO seats, handle bar risers, screens, adjustable control levers, footrest lowerings and a host of other ERGO parts allow you to choose a more comfortable riding position and have superior weather protection – that way even long distance touring is much more enjoyable. Our engine protection bars, mudguard extensions, reservoir covers, mudguard extensions and much more protect you and your bike from damage. In many cases, our wide selection of guards and protectors will signiﬁcantly reduce the cost of repairs in case of a fall.

who would object to that… We have a good selection of high quality performance parts for your motor, brakes and chassis, all thoroughly tested by our racing activities and long distance testing rides - you can read in the “Wunderlich Touring and Racing” section in the catalogue about some of these adventures. A good portion of our catalogue is dedicated to luggage and touring equipment. Our own love for touring and long distance travelling has been used to good effect to continually develop and reﬁne our various bags and luggage solutions. Lastly, the “Accessories” section at the end of the catalogue includes many additional parts, service items and accessories for your bike, and also some parts that are not for the vehicle but for you, the rider, to enjoy. We hope that you will enjoy reading this catalogue and that you ﬁnd some interesting items for your bike.

Yours, Erich Wunderlich

Those who would like to improve the appearance of their bike will not be disappointed. Our parts program includes many stylish parts developed with great attention to detail, these will enhance your bike and make it stand out from the rest. See and be seen! In the current worsening trafﬁc conditions this becomes ever more important to bike riders. Our auxiliary lights illuminate dark roads far better than before, and ensure that you are much more visible during the day to other trafﬁc users – a gain in active and passive safety. Better handling and more power? There are not many motorcyclists

An additional comment:

We are very pleased that many female bikers use our products. We would like to ask these “bikeresses” not to take offence if some texts in this catalogue use the male form, for instance “his” instead of “his/hers”. This is only done in order to simplify the texts, especially as many products in our line-up are a direct result of input received from our female staff members and test riders.

Imprint Copyright by Wunderlich GmbH. Reproduction, printing or use of any material from this catalogue is not permitted unless authorised by the Wunderlich GmbH. Photos: Till Kohlmey, Gerhard Rudolf “Buenos Dias”, Felix von Canstein “Pro-Photo”, Erich Wunderlich, Oliver Lohner and others. Furthermore, we would also like to thank all people who have given us permission to use their pictures. Wunderlich GmbH • Kranzweiherweg 12 • D-53489 Sinzig-Gewerbepark Tel. +49 (0) 2642 - 9798-0 • Fax +49 (0) 2642 - 9798-33 www.wunderlich.de • wunderlich@wunderlich.de

Index, Rizoma, ERGO and Internet Page 1 - 6

Enduro & Off-Road R 1200 GS + Adventure Page 7 - 86

F 650 GS (Twin) + F 800 GS Page 87 - 122

R 1200 GS-HP2 + Megamoto Page 123 - 154

F 650, ST + GS (Single), DAKAR + CS Page 155 - 178

R 850/1100/1150 GS + Adventure Page 179 - 222

R 80/100 GS + R Page 223 - 244

Roadster & Tourer R 850/1100/1150 R, Rockster + R 1100/1150 RT Page 245 - 292

R 1200 RT Page 293 - 318

R 1200 R

Page 319 - 354

Cruiser + R 1200 CL Page 355 - 378

K 1100/1200 LT Page 379 - 394

Sport R 1100 S + R 1100/1150 RS Page 395 - 430

R 1200 S

Page 431 - 468

K 1200 R + S Page 469 - 516

Sport Tourer K 1200 GT (2006- ) Page 517 - 540

R 1200 ST Page 541 - 572

K 1100/1200 RS + K 1200 GT (-2005) Page 573 - 598

Accessories Page 599 - 632

Wunderlich Touring + Racing Page 633 - 656

Accessories RIZOMA: Noble design for your BMW.

Chargers: Keep your battery in top condition.

Vario Scarf: A multi purpose Wunderlich scarf.

Boxer Watch II, S-Boxer Watch, and K-Power Watch: Exclusive design Made by Wunderlich

Workshop, tools and workshop equipment.

MediaBag and MultiPod: Innovative solutions for riding with multimedia and navigation systems.

Bike Covers: Keep your bike clean and dry.

Easy Park: Move your bike on the centre stand.

MultiPod

��

�

��

to e . ed th el if tt See mod be ! W n ike M ca torb ur B d o iPo mo r y ult any t fo M s y li e Th tuall ion vir licat p ap

��

Extremely versatile and robust, the MultiPod’s revolutionary adjustment range allows you to easily place virtually any electronic device in the optimal ﬁeld of view location. Available are 3 different types of MultiPod: MultiPod “Long” (146 mm/~5.7”) The “Classic” MultiPod. Robust with quality workmanship. Precision machined form high quality aluminium alloy.

MultiPod “Long Carbon” (146 mm/~5.7”) The sporty version MultiPod. Extreme toughness combined with an exclusive appearance. Recommended for all sport bikes. MultiPod “Short” (73 mm/~2.9”) A small half size aluminium body MultiPod. Suitable for conﬁned spaces and wherever size is an issue.

Limitless adjustability: The principle is simple. No matter where it’s mounted, the multifunctional adjustability always allows the best position for a device to be found. • • • •

Either ball joint can be adjusted independently of the other. Both ball joints turn 360° and pivot 180° from any point. Fine adjustments are possible throughout the range. For further mounting possibilities, a stainless steel extension is optionally available.

Vibration-Free:

Soft Silent Block mounts effectively ﬁlter out vibrations, protecting even delicate devices from shock.

Robust:

Speeds of over 200 km/h (~125 MPH) and/or washboard roads are not a problem. The system underwent over 60,000 km of hard testing in extreme conditions.

Easy installation:

The ball joint heads are hollow and accept 6 mm or 8 mm Allen bolts. Simply remove one ball joint and attach the MultiPod to the position of your choice. Then the holder body can be re-attached.

Quality construction:

Aluminium parts machined of the highest quality aluminium and hard anodised for a tough ﬁnish. Carbon parts with a clear high gloss coating. Technically as well as optically impressive.

The multi-device carrier plate. Available separately as an upgrade for earlier MultiPod versions.

Easy and fast adjustment of position with the grippy wing nuts.

Versatile:

Whether a navigation system or PDA (combined with our MediaBag), a BMW Navigator, all devices with claw adapters, a TomTom Rider or camcorder/ camera - you’ll be able to attach virtually any electronic device safely to your bike with the MultiPod.

Application Samples

Handle bar clamp

Attachment of MultiPod using the “Flat Bracket” set.

MultiPod with “Device Carrier Plate” and small camera.

Attachment of MultiPod with the handlebar clamp bolt.

Accessories MultiPods MultiPod “Long” (Aluminium)

For the BMW Navigator, Claw System, TomTom RIDER I+II and Garmin ZUMO.

Aluminium MultiPod complete with vibration-free holder (including silent blocks) for attachment of a device such as BMW Navigator, TomTom RIDER I+II, Garmin ZUMO or for the “claw” system (please order claw adapter separately). Part No.: 1250287

MultiPod “Long” (Aluminium) Individually

The MultiPod, supplied without the upper round carrier plate or silent blocks. This version allows you to attach a device of your choice with a 6 or 8 mm Allen bolt to the ball joint head.

1250287

1250283

1250601

1250603

1250606

1250604

Part No.: 1250283

MultiPod “Long Carbon”

For the BMW Navigator, Claw System, TomTom RIDER I+II and Garmin ZUMO.

Aluminium /Carbon ﬁbre combination MultiPod with vibration-free holder (including silent blocks) for attachment of a device such as BMW Navigator, TomTom RIDER I+II, Garmin ZUMO or for the “claw” system (please order claw adapter separately). Part No.: 1250601

MultiPod “Long Carbon) Individually

The “Long Carbon” MultiPod supplied without the upper round carrier plate or silent blocks. This version allows you to attach a device of your choice with a 6 or 8 mm Allen bolt to the ball joint head. Part No.: 1250603

MultiPod “Short” (Aluminium)

For the BMW Navigator, Claw System, TomTom RIDER I+II and Garmin ZUMO.

� �

�

��

�

� ��

��

� ��

�

��

�

��

�

��

�

��

Included with each Multiod: Detailed multipage English/Italian/German instruction booklet

Part No.: 1250604

MultiPod Accessories Multi-device carrier plate (round)

The ﬁrst generation MultiPods were equipped with a carrier plate suitable for the navigation devices available at the time. We have constantly developed the plate to allow more current devices to be ﬁtted. • • • • • •

Fits all Wunderlich MultiPod versions. Easy to ﬁt. Sold complete with set of “silent block” shock absorbers. Adapted for TomTom Rider I+II, Garmin Zumo + BMW Navigator. Already included with the current MultiPod versions (not “Individually”). Includes special bolt to attach camera/camcorder to plate.

If you’ve got one of the older MultiPods with an old carrier plate, or you have one of the “Individually” versions that don’t have this included, you can upgrade your MultiPod with this part. Part No.: 1250301

� ��

�

��

Carrier device carrier optional “Device the optional With the With corder camcorder plate ++cam Plate”

��

MultiPod “Short” (Aluminium) Individually

�

��

Part No.: 1250606

The “Short” MultiPod supplied without the upper round carrier plate or silent blocks. This version allows you to attach a device of your choice with a 6 or 8 mm Allen bolt to the ball joint head.

“Short” MultiPod with mini-Camera

Carbon Fibre MultiPod with TomTom RIDER

��

A “Short” version of the aluminium MultiPod. The "Short" (only one ball joint on top) can be ﬁtted to the bike with our Flat Bracket, a suitable round bar clamp or onto any accessible position with an 8 mm bolt. Complete with vibration-free holder (including silent blocks) for attachment of a device such as BMW Navigator, TomTom RIDER I+II, Garmin ZUMO or for the “claw” system (please order claw adapter separately). Note: The "Short" type MultiPod is supplied with an 8 mm bolt and an adapter (for bar clamp etc.). The short version is especially suitable for mounting mini-cameras at the front or at the back (see image).

601

Accessories MultiPod Accessories Flat Carrier Plate

This strong aluminium plate is required for a professional attachment of the Wunderlich MediaBag to any MultiPod. In addition it has two holes to attach a camera/camcorder to it using a special bolt (included with plate). The plate is purpose made for the MultiPod but will ﬁt other mounting systems. Part No.: 1250286

Flat Carrier Plate: For fitting devices such as camera/camcorder, (also with quick release adapter) or MediaBag + PDA or similar.

Quick release adapter for camera or camcorder

With this accessory, your camera or camcorder can be removed or installed in seconds. For use with a MultiPod + the device carrier plate. Part No.: 1250292

Claw Adapter Quick release adapter

With Quick release and Camcorder

The adapter for the popular “claw” system. For example, the Medion MD 95000 series is supplied with a handy, waterproof pouch for use with this adapter. Note: Can only be when the (round) multi device carrier plate is fitted to the MultiPod.

Part No.: 1250284

K 1200 S Adapter

This special adapter allows easy ﬁtting of the MultiPod to the K 1200 S handle bars. Claw adapter e.g. for “Medion” bracket

Only for K 1200 S

Part No.: 1250298

Mirror Mount Adapter

Suitable to mount a MultiPod to an unused mirror mounting point (in switch armatures). For K 1200LT, R 1100 S, R 850/1100/1150/1200 RT and K 1100 LT/RS. Part No.: 1250279

K 1200 S adapter

Mirror mount adapter

Suction Cup

Suction Cup Base

To attach a MultiPod to any glass (or other smooth surface) in car, boat, campervans etc. Part No.: 1250293

Handle Bar Clamps

These handle bar clamps can be used to securely attach a MultiPod to a 22/25/29 mm round handle bar, or the oval wind screen support of the R 1200 GS. The clamps are made of top quality CNC machined aluminium. A 40 mm extension spacer is included, as well as the clamping bolts. 22/25/29 mm Ø Handle Bar clamps

Attached with 40 mm extension

“Short” MultiPod attached to clamp

22 mm Clamp Part No.: 1250272 25 mm Clamp Part No.: 1250271 29 mm Clamp Part No.: 1250273 Clamp for the oval screen support bracket. Only for R 1200 GS Part No.: 1250276

Flat Bracket Set

This flat 4 mm thick bracket set can be used to fit a MultiPod on a mirror mount, or anywhere else where a 8 or 6 mm bolt can be accessed. The fitting kit includes 3 bolts, 2 spacers, various washers and a lock nut. Flat Bracket Set: Helps to attach a “Long” (picture) or “Short” MultiPod to the bike wherever needed. M8

Ø8,2 mm

90° Adapter

This adapter allows ﬁtting of a MultiPod to a bolt which is 90° from the required direction. Especially useful for attaching the “Short” MultiPod to the bike as it does not have a lower ball joint. Includes a M8x50 mm Allen bolt. Made of silver anodised aluminium.

41 mm

90°

90° Adapter

602

Part No.: 1250295

Part No.: 8500150

Accessories MultiPod Accessories Spacers

Length 4 mm Length 8.5 mm Length 11.5 mm Length 40 mm

40 mm

Ø 8.2 mm

If the MultiPod needs to be mounted higher. Suitable for 6 or 8 mm bolts. Stainless steel. Part No 1250234 Part No 1250232 Part No 1250233 Part No 1250288

11.5 mm

4 mm

8.5 mm

Quality stainless steel spacers

Longer Bolts

In some cases you will need longer bolts to mount your MultiPod to the bike. For instance, when mounting a “Long” type MultiPod with a lower ball joint directly to the handle bar clamps, you would need a 20 mm longer bolt than the original one. If you are using any additional spacers, you will need to add the length of the spacer to the length of the bolt as well. The bolts are good quality galvanized “Allen” bolts, the part numbers for a required length can be determined using the part number key explained below:

Longer “Allen” bolts

Note: When measuring bolts, only measure the length of thread and shaft without the bolt head. M8x40 means diameter of bolt is 8 mm, length 40 mm.

8 mm Bolts:

M8x40 mm bolt M8x45 mm bolt and so on in 5 mm steps up to Then in 10 mm steps up to

6 mm Bolts:

M6x40 mm and then in 5 mm steps up to

Part no: 912Z-8-40 Part no: 912Z-8-45 912Z-8-85 912Z-8-120

Part no: 912Z-6-40 912Z-6-80

“Extreme” Bracket for TomTom RIDER I

“Extreme” Bracket for TomTom RIDER

This additional clamping device will ensure the “TomTom RIDER” does not suffer disconnection, even when riding on very rough roads. Initially developed for our extreme off-road activities, this part is fast becoming a must-have item for TomTom RIDER owners. The original universal bracket supplied by TomTom is sufﬁcient for normal use, however for sport or holiday use we strongly recommend the use of the MultiPod “Extreme” with its super strong anti-tamper clamps. Sold complete with anti-tampering bolt (special key supplied).

Note: For the TomTom II there were no pictures available at the time of printing, as part is still in development. Available from August 2008.

For TomTom I For TomTom II

Part No.: 8600880 Part No.: 8600881

Anti tampering bolt and key included.

MultiPod Application List for BMW motorcycles Vehicle

Year

MultiPod version

Recommended attachment method

Vehicle

Year

MultiPod version

Recommended attachment method

R 80/100 R + GS

all

All models

Handle bar clamp: 1250272

R 850 R up to 09/´02, R 1150 R + Rockster

all

MultiPod “Long” MultiPod Carbon

Bolt: 912Z-8-50

F 650, ST, CS

all

All models

Handle bar clamp: 1250272

R 1100/1150/1200 RT

all

MultiPod “Long” MultiPod Carbon

Bolt: 912Z-8-60 Spacer: 1250233

F 650, ST, CS (Alternative option)

all

MultiPod “Long” MultiPod Carbon

Bolt: 912Z-8-50

all

All models

Handle bar clamp: 1250271

all

All models

Handle bar clamp: 1250272

R 1200 C + CL, Independent, Montauk (with 25 mm handle bars)

G 650-Models

all

MultiPod “Long” MultiPod Carbon

Bolt: 912Z-8-55 Spacer: 1250233

R 1200 C + CL, Independent, Montauk (with 29 mm handle bars)

all

All models

Handle bar clamp: 1250273

F 800 ST

all

MultiPod “Long” MultiPod Carbon

Bolt: 912Z-8-60 Spacer: 1250233

K 1200 LT

all

MultiPod “Long” MultiPod Carbon

Mirror Mount Adapter: 1250279

F 650/800 GS (Twin)

all

All Models

Bolt: 912Z-8-50

K 1200 RS + GT

up to 2005

All models

Flat Bracket set: 1250295

R 850/1100/1150 GS + Adventure

all

All models

Handle bar clamp: 1250272

R 1200 R

all

All models

Handle bar clamp: 1250272

R 850/1100/1150 GS + Adventure (Alternative option)

all

MultiPod “Long” MultiPod Carbon

Bolt: 912Z-8-50

R 1200 R (Alternative option)

all

MultiPod “Long” MultiPod Carbon

Bolt: 912Z-8-55

R 1100 S with fairing mounted mirrors

all

MultiPod “Long” MultiPod Carbon

Mirror Mount Adapter: 1250279

R 1200 ST

all

MultiPod “Long” MultiPod Carbon

Flat Bracket set: 1250295

R 1100/1150 RS

all

All models

Flat Bracket set: 1250295

R 1200 GS, Adv., HP2

all

MultiPod “Long” MultiPod Carbon

Bolt: 912Z-8-50

R 850/1100 R

up to 8/´02

MultiPod “Long” MultiPod Carbon

Spacer: 1250288 Bolt: 912Z-8-100

K 1200 R

all

All models

Flat Bracket set: 1250295

R 850 R up to 09/´02, R 1150 R + Rockster

all

All models

Handle bar clamp: 1250272

K 1200 S

all

MultiPod “Long” MultiPod Carbon

K 1200 S Adapter: 1250298

K 1200 GT

from 2006

MultiPod “Long” MultiPod Carbon

90° Adapter: 8500150

F 650 GS + Dakar

Still not sure which adapter/attachment method to use for your bike model? Ask one of the official Wunderlich dealers for advice: www.wunderlich.de/update

603

MediaBag

The ﬁrst water (not for submersion) and dust-proof utility pouch for just about any electronic device such as GPS navigation systems, pocket PC (PDA), iPod, etc. A thought-out and brilliantly designed concept that offers optimal protection for your electronic device and simultaneously allows unrestricted use of touch screens and controls etc.

MediaBag Always in sight:

Using the two attachment tabs the soft, clear window of the MediaBag is stretched tightly over the face of your electrical device and held in position with Velcro on the back side (or ﬁxed to a MultiPod). This acts as a second skin for your device guaranteeing optimal clarity and excellent access to the touch screen and/or buttons. Because of the thin yet robust materials the device can remain inside the bag during phone calls or for voice-operated commands etc. Voice and sounds emitted are clearly audible with most devices. Alternatively power and audio cables can easily be routed to/from the device.

Security:

The MediaBag is constructed of abrasion resistant Teflon-coated Cordura fabric. The see-through skin is made of highly flexible and UV resistant clear PVC-glass. When fitted to a MultiPod or similar mount the foam plates provide optimal protection from vibration. Manufacturing of this bag is entrusted to the well known German company Ortlieb, experts in waterproof bags of all sizes.

Foam plates + Madia Bag Insert included

Carrying strap included

Folding antenna compartment.

Extreme Testing:

The MediaBag has proven itself time and time again in over 60,000 km of hard testing throughout Europe, Asia, Africa and the Orient. Even in the toughest off-road conditions, no technical problems of any kind have surfaced nor has any device suffered any damage while in the MediaBag. Even at speeds of over 200 km/h (125 MPH), when used in conjunction with the specially designed MultiPod, it will remain stable and secure. Guaranteed.

Versatile:

Because of the multitude of adjustment possibilities, the MediaBag is equally well suited for use with virtually any electronic device such as mobile (cell) phones, iPod etc. When attaching the MediaBag to a motorcycle, the specially designed MultiPod is recommended.

Water proof cable exit (not for immersion)

Application Samples

1. Insert foam pads

2) Insert the device.

3) Roll up end and secure. For smaller devices, fold back the antenna compartment (as needed)

4) Use attachment tabs to mount onto a MultiPod (for example) and simultaneously pull the clear window tight*. * Tabs and back of MultiPod use Velcrotype hook and loop attachments.

Accessories MediaBag Quick attachment for FingerStylus (pointer).

The MediaBag is supplied complete with two foam plates, a MediaBag Insert (see details below) and an adjustable carrying strap (lanyard). Waterproof, tough, Teﬂon coated Cordura material. For use on motorcycles we recommend the use of one of our MultiPod versions together with the ﬂat carrier plate (order separately, see below for details). MediaBag

Fitting tabs with Velcro-type attachment for mounting to the base plate.

Part No.: 1250280 The foam pads under the device act as a shock absorber and ensure a close fitting top surface for better visibility.

Flat Carrier Plate

This strong versatile aluminium plate is required for a professional attachment of the Wunderlich MediaBag to any MultiPod. The tabs of the MediaBag and the back of the plate use Velcro-type hook and loop attachments and will provide a secure and strong connection. In addition the plate has two holes to attach a camera/camcorder to it using a special bolt (included with plate). The plate is purpose made for the MultiPod but will ﬁt other mounting systems.

Cable exit made water-resistant through wrapping

Part No.: 1250286

MediaBag Insert

Finally everything is kept organised and tidy! This memory card wallet has been developed out of necessity as we found out from our own touring experience. Now all different types and sizes of memory cards can be quickly and safely stored and carried. Contains 7 compartments with 4 different sizes. It ﬁts perfectly into the MediaBag and is placed under your device (instead of one of the foam plates for instance). This way you will have your cards ready, and most important protected from dirt, dust and water.

Flat Carrier Plate: Fast and secure attachment of MediaBag

Note: Since a short while the MediaBag Insert is already included with the MediaBag, so only order this part if you need another one/replacement.

Part No.: 1250152

FingerStylus

The ﬂat touch screen pointer can be stored on the side of the MediaBag or attached to your index ﬁnger, even with gloves. Suitable for use on all touch screens.

MediaBag Insert

Part No.: 1250289

GlareProtector

Guaranteed to offer a glare free view of your device, even in direct sunlight. Easy to adjust for changing conditions. Part No.: 1250281

ConnectorBag

A tube which insulates any electrical connection (for example accessory plug adapter). Successfully tested in over three hours of heavy rain. Made in Germany by Ortlieb.

FingerStylus: Operate touch screen of device inside MediaBag without taking gloves off.

Part No.: 1250282

Belt Loop

A practical belt holder with quick release connection. Part No.: 1250291

GlareProtector

ConnectorBag

Belt Loop

605

Wunderlich Watches We have created this dynamic watch in the style of the current Boxer and “K” instruments. The outstanding features of our watches include technical exclusivity, meticulous detail and extraordinary mechanization. The decentralized second hand is driven by its own movement that together with the minute/ hour hands, forms a symbiotic “time instrument”. We have been inspired by the typographies of the Boxer and “K” instruments and have adopted the typical style elements of the gauges. The snappy, ergonomic execution provides the wearer exceptional comfort, even beneath snug ﬁtting leathers. The 3 versions of the Wunderlich watches set a new standard of aesthetics and reﬂects our passion for design, perfection and technical advancement. The facts:

• Each watch is individually numbered and is supplied with a certiﬁcate of authenticity. • Double movement. One movement for hours/minutes and another for seconds. • Solid stainless steel or Titanium body with a satin ﬁnish. • Polished stainless steel or Titanium back with engraved serial number. • Premium, optically clear and polished watch crystal. • Embossed emblem for enhanced brand recognition. • Waterproof up to 50 meters (160 feet) • Matching stainless steel or Titanium wristband. • Ergonomic, folding buckle. • Wristband can be individually adjusted with the included special tool. • Plated aluminium storage box for the watch and tool included.

The consecutive numbering makes each watch a unique and unmistakable commemoration of the successful, more than 16 year history of the latest Boxer series and over 20 year history of the “K” series. We protect this valuable memento in an elegant metal can, incorporated with a transparent lid. You’ll receive this watch registered and certiﬁed. An exact description as well as a certiﬁcate containing details and the serial number is included with the watch.

Boxer Watch II

Three versions available: 1) Stainless steel Boxer Watch II 2) Titanium S-Boxer Watch 3) Titanium K-Power Watch Each version comes with a matching wristband and back.

Stainless Steel Boxer Watch II Titanium S-Boxer Watch Titanium K-Power Watch Replacement Batteries Hours hand Seconds hand

Part No.: 9001200 Part No.: 9001205 Part No.: 9001240

Part No.: 9001202 Part No.: 9001201

S-Boxer Watch

K-Power Watch

Special Tool for individual wristband adjustment

Metal case for watch and tool

Accessories Aluminium Mirrors These mirrors are high quality CNC machined and anodised aluminium mirrors. Vibration is greatly reduced, as is the “blind spot” in traffic, due to the aspherical (2 planes) mirror surface that widens your field of vision. There is a choice of several types of mirror bodies (heads), as well as two types of mirror stems, all in various colours. All components are sold separately, so you can mix and match colours to give your bike a personal touch. Important notes: 1) To see if your bike can be fitted with the mirrors see if it is listed with the adapters (next page). 2) Every mirror assembly needs to have 1 mirror body, 1 stem and 1 vehicle related fitting adapter. Part numbers are for a single part only! 3) Before ordering, please measure the length of your mirror stem to make sure you order the correct stem length. 4) The 1100 S uses special stems (see below). Master Flash or Standard stems will not fit.

Mirror Body (Head), aspheric

Mirror Body “Flash Control”

Silver Black Red Blue

Carbon/silver (“Bicolor”) Carbon/black (“Bicolor”)

Part No.: 8700030 Part No.: 8700020 Part No.: 8700026 Part No.: 8700024 Part No.: 8700181 Part No.: 8700182

Mirror Body “Flash Control”

This mirror body has a built in LED in a very visible position for the rider. It helps the rider to see if the indicators (turn signals) have been left on, which could cause a potentially dangerous situation in trafﬁc. Fitting is easy, connection is to the indicator wiring (electronic adapter not needed).

Mirror Body “Bicolor”

Silver Black Blue Red Carbon/silver (“Bicolor”) Carbon/black (“Bicolor”)

Part No.: 8700305 Part No.: 8700306 Part No.: 8700307 Part No.: 8700308 Part No.: 8700309 Part No.: 8700310

Which mirror stem fits best?

Mirror Stems (standard)

A mirror fitted with an 100 mm stem (R 1200 GS = 125 mm) is more or less equivalent to the original mirror length. The stem is slightly shorter, but the mirror is wider and you get a better rear view field. Whoever suffered with reduced rear view (wide shoulders, narrow handlebars) with the original mirrors should opt for the 125 or even 150 mm stem (1200 GS = 150 mm).

Mirror Stems (standard) 100 mm Silver Black Red Blue Mirror stem R 1100 S

125 mm Silver Black Red Blue

150 mm Silver Black Red Blue

Mirror Stem R 1100 S, 120 mm Black Silver

608

Part No.: 8700110 Part No.: 8700100 Part No.: 8700106 Part No.: 8700104

Part No.: 8700111 Part No.: 8700101 Part No.: 8700107 Part No.: 8700103

Part No.: 8700112 Part No.: 8700102 Part No.: 8700108 Part No.: 8700105

Part No.: 8700120 Part No.: 8700130

Accessories Aluminium Mirrors Mirror Stems “Master Flash” LED

The Master Flash has an LED indicator (turn signal) integrated into the mirror stem. The Kellermann-made LED emmits a strong light and has a long life expectancy. When using the Master Flash, one “Electronic Adapter Set” (see below) is needed per bike. Note: In most countries fitting these indicators is legal only as a replacement for the original front indicators. They could be used in combination with the existing front indicators, but make sure it is road legal in your country!

Mirror Stem “Master Flash” 125 mm, left side Part No 8700161 Part No 8700163 Part No 8700171 Part No 8700173

Silver Black Red Blue

125 mm, right side Part No.:8700160 Part No.:8700162 Part No.:8700170 Part No.:8700172

Silver Black Red Blue

150 mm, left side Part No.:8700174 Part No.:8700176 Part No.:8700179 Part No.:8700184

Silver Black Red Blue

150 mm, right Part No.:8700175 Part No.:8700178 Part No.:8700183 Part No.:8700185

silber schwarz rot blau

Electronic Adapter Set

An electronic wiring adapter set, includes the necessary electronic “ﬂash killer”. Only one adapter is needed per bike. Easy to ﬁt. Only for Master Flash stems. For all models

Part No.:8700180

Fitting Adapter

One adapter is needed for every mirror stem. Can be ﬁtted on left or right hand side. Suitable for standard or “Master Flash” mirror stems. Sold as single item. R 1150 GS + Adventure, R 850 R (from 09/’02 + Comfort), R 1150 R, Rockster, R 1150 RT/RS, R 850/1200 C, R 1200 CL, K 1200 RS/GT (up to 2005), R 1100 S with handle bar mirrors (Adapter A)

Part No.: 8700210

R 850/1100 R, RS, RT + GS (Similar to Adapter A)

Part No.: 8700230

R 1100 S (fairing mounted mirrors) (Adapter B)

Part No.: 8700200

Adapter A

Adapter B

Adapter C

All single cylinder F 650 Models (Adapter C)

Part No.: 8700220

R 1200 GS + Adventure, HP2, Megamoto, R 1200 R, K 1200 R + Sport, R 1200 ST, F 650 GS (Twin) + F 800 GS (Twin) (M10x45 mm bolt)

Part N: 912Z-10-45

Specchietti RIZOMA

Need more mirror options? See the stylish RIZOMA-made aluminium mirrors in your specific catalogue section for details.

609

Accessories “ERGO-Sport” Mirrors These are ingenious mirrors with several adjustment possibilities. If needed, they can be folded completely out of the way. This solves several problems such as moving in traffic or when parking, also when off-road riding (not in the way when riding standing up) and in case of a fall the mirrors are better protected. In addition, the 75 mm (~3”) length adjustment range of the “Flash” mirror ensures the rider can always see what’s coming from behind. In case of a fall when the mirrors are in the regular position the angle adjustment joint and the built-in “clutch” allow the mirror to fold and rotate, this usually prevents damage to the mirror and attachment points. The aspherical (2 planes) mirror surface widens the field of vision and reduces the “blind spot”, a problem associated with the original mirrors. The special mirror glass incorporates a light blue anti-glare layer that reduces sun and light reflections to a minimum. In contrast to most pure off-road mirrors, these are “E” approved and suitable for road use (Europe). The Facts

• Stepless angle adjustment, folds away if needed. • “Flash” model also length adjustable (75 mm range) • Built in “clutch” between mirror and attachment bolt protects mirror and attachment points in case of a fall. • “E” approved • Sold complete with adapter for each model. • Easy and fast ﬁtting to bike.

“Flash” mirror with lenth adjustment

Mirror can be fitted to left or right side, sold as a single mirror unit. Suitable for all models using a 10 mm mirror thread

“Flash” “Round”

“Round” mirror

Built in “clutch”

610

Stepless angle adjustment

Part No.: 8700035 Part No.: 8700033

Accessories Tyre Valve Cap With Emblem Love is…... when you pay attention to the smaller parts of your BMW. A beautifully machined (not cast!) aluminium cap with the bike manufacturers emblem on top (emblem included but not shown in picture). Not just pretty but also functional, it has an “O” ring to seal the valve and keep dirt out. For all tyres (ﬁts your car as well!) Single cap

Part No.: 1900227

Aluminium Tyre Valve Cap Replace the dull original tyre valve caps with a great looking metal cap. Made of aluminium with lots of details. Available are two different types, “Piston” and “Grip”, in various colours. Sold as a set of two caps. Tyre Valve Caps “Piston” (set of 2) Silver Blue Black Red

Part No.: 1900231 Part No.: 1900232 Part No.: 1900233 Part No.: 1900234

Tyre Valve Caps “Grip” (set of 2) Silver Blue Black Red

Part No.: 1900235 Part No.: 1900236 Part No.: 1900237 Part No.: 1900238

“Piston”

“Grip”

Bolt Head Cap Set These little details prove the true love to our BMW. The “Allen” bolt heads on the bike usually will look scruffy after some time. They also ﬁll up with dirt, and are not easy to clean. The plastic caps are simply pushed onto the head and cover it up. The bolt looks much better now and is also protected. Made of plastic with a high gloss chrome-like surface. Sold as a set, each set consists of 16 caps. Note: The caps will fit into any “Allen”(hexagon) head bolt, including counter sunk or “flat” head “Allen” bolts (not round headed bolts). To make sure you get the right size caps, check the “Allen” key size of the bolt before ordering.

Key size 4 mm Key size 5 mm Key size 6 mm

Part No.: 1900240 Part No.: 1900241 Part No.: 1900242

Wheel Rim Stickers

Key Size

These self adhesive rim stickers highlight the wheel and allow you to customise your bike. They also have a safety aspect as the reﬂective material makes the bike much more visible at night. Especially from the side a bike is not easily recognised at night. The rim stickers strongly reﬂect the light and warn other road users of your presence. The set includes a roll of sticker with enough length for both sides of the front and rear wheels. Applying the tape to the bike is easy, a special patented tool is included so that the tape is applied true and straight. Tape made of strong, detergent and UV resistant material.

White rim sticker

19/21” rim White Blue Red Yellow

Part No.: 2024009 Part No.: 2024007 Part No.: 2024006 Part No.: 2024005

17” rim White Blue Red Yellow

Part No.: 2024004 Part No.: 2024002 Part No.: 2024001 Part No.: 2024000 Yellow rim stickers on the Continental R 1200 GS special

611

Accessories Tank and Paint Protection “Venture Shield”

Foil and paint surface...

...are sprayed with fitting fluid.

Foil is positioned, (“floats” + moves easily).

Air and fluid pushed out with spatula

A flexible and indestructible plastic protection foil that was originally designed to protect propeller and rotor blades from stone damage. Speed-of-sound aircraft application to protect your BMW! This almost invisible foil protects the paint from stones, sand, bugs and any other flying objects that may cause scuffs, scratches or abrasive marks as well as accidental marks from tools, keys and other day to day objects that might come close to the bike. As any damage to the paint is detrimental to the resale value of a bike it is important to keep it in a good as possible condition, so the investment is worth considering. The foil absorbs most of the impact energy, it makes sense to fit the head light foil as well. It is UV resistant, but lets UV rays shine through so that there are no differences in the colour of the paint between protected and non protected areas of the bike. Each piece is custom made and cut to an exact shape for a perfect fit. The foil clings very well, but can be removed quite easily. Bike can be cleaned as before (even steam cleaned). The kit comes complete with cleaning fluid, tools and everything that is needed and can easily be fitted by anyone with a bit of patience. Available in several versions such as tank sets, complete sets and complete set + a foil to protect the screen.

Universal Foil

A single 20 x 30 cm (~7.8 x 11.8”) foil, to be cut and/or used wherever else needed. Part No.: 1250455

R 850/1100/1150 GS

R 850/1100/1150 GS, 3 piece Tank set Part No.: 1250410 Adventure, 5 piece tank set Part No.: 1250420 R 1150 GS (not Adventure) complete set 15 piece set Part No.: 1250415

R 1100/1150 RS Carefully dab and dry.

Tear proof foil

Tank Set (3 piece) Part No.: 1250370 Complete Set (Includes tank set + fairing + head lamp foils) Part No.: 1250375

R 1100 S

Tank Set (4 piece) Part No.: 1250340 Complete Set (Includes tank set + fairing + head lamp foils) Part No.: 1250345

R 1150 R + R 850 R (from 09/2002 on) R 1150 GS Adventure

R 1100 S

Tank Set (3 piece) Part No.: 1250360 Complete Set, consists of a tank set plus foils for the fairing and head lamp, forks and mudguard Part No.: 1250365

R 1150 RT

Tank Set Tank Set (3 piece) Part No.: 1250380 Complete Set, consists of a tank set + top and bottom, side cases, head lamps and front mudguard Part No.: 1250385

R 1200 C

Tank Set (3 piece set) Part No.: 1250460 Complete Set, consists of a tank set plus foils for the head lamp, forks and mudguard Part No.: 1250465

R 1200 CL

R 1150 R

Cruiser

Tank Set (3 piece set) Part No.: 1250390 Complete Set, consists of a tank set + foils for fairing top and bottom, side cases, head lamps and front mudguard Part No.: 1250395

R 1200 GS (up to 2007)

Tank Set Complete Set Complete Set + screen protecting foil

R 1200 GS (from 2008)

Tank Set (3 piece set) Complete Set Complete Set + screen protecting foil

Part No.: 1250400 Part No.: 1250405 Part No.: 1250406

Part No.: 1250409 Part No.: 1250411 Part No.: 1250412

R 1200 Adventure (up to 2007) Tank Set (3 piece set) Complete Set

R 1200 Adventure (from 2008) Tank Set (3 piece set) Complete Set

R 1200 GS

612

Case Set R 1200 Adventure (all models)

Part No.: 1250496 Part No.: 1250407

Part No.: 1250497 Part No.: 1250413

Part No.: 1250408

Accessories Tank and Paint Protection “Venture Shield” R 1200 R

Tank Set (5 piece set) Part No.: 1250515 Complete Set (includes the “Tank Set”): 14 piece set for protection of the major painted surfaces Part No.: 1250510

R 1200 S

Tank Set (3 piece set) Part No.: 1250495 Complete Set (13 piece set) consists of a “Tank Set” + foils for fairing, mudguard, side covers and various other foils Part No.: 1250490

R 1200 R

R 1200 S

R 1200 RT

R 1200 ST

K 1200 LT

K 1200 GT (up to 2005)

K 1200 GT (from 2006)

K 1200 R

K 1200 S

F 800 GS

R 1200 RT + R 1200 ST 1) Case Set (not included in “Complete set”): This set makes absolute sense as the cases get scratched by the boots when mounting/dismounting from the bike, and the front of the cases are exposed to stone damage. 2) Top Case Foil: Protects the large painted surface of the top case. 3) Tank Set (already included with the “Fairing Set”): This set consists of 2 side and one top foil to protect the tank. 4) Screen Set (Not included with the “Fairing Set”): This protects the most sensitive and regularly cleaned surface of the screen. 5) Fairing Set (Includes the “Tank Set”): This set protects the surfaces of the fairing, front mudguard, side covers, tank and even includes a foil for the head lamp (stone damage protection).

R 1200 RT 1) Case Set 2) Top Case Foil 3) Tank Set 4) Screen Set 5) Fairing Set

Part No.: 1250440 Part No.: 1250441 Part No.: 1250425 Part No.: 1250435 Part No.: 1250430

R 1200 ST 1) Case Set 2) Top Case Foil 3) Tank Set 5) Fairing Set

Part No.: 1250440 Part No.: 1250441 Part No.: 1250445 Part No.: 1250450

K 1200 LT

Tank Set (3 piece set) Part No.: 1250310 Complete Set, consists of a tank set + foils for fairing, head lamp, forks, mudguard and various other small foils Part No.: 1250315

K 1200 RS + GT (up to 2005)

Tank Set (3 piece set) Part No.: 1250305 Complete Set, consists of tank set + foils for the fairing, head lamp, forks, mudguard and various other small foils Part No.: 1250300

K 1200 GT (from 2006)

Tank Set (3 piece set) Part No.: 1250485 Complete Set (26 piece set) consists of “Tank Set” + foils for fairing, mudguard, side covers + various other foils Part No.: 1250480 Screen protecting foil Part No.: 1250486

K 1200 R

Tank Set (3 piece set) Part No.: 1250338 Complete Set (19 piece set) consists of “Tank Set” + foils for fairing, mudguard, side covers + various other foils Part No.: 1250337

K 1200 R Sport

Tank Set (3 piece set) Part No.: 1250338 Complete Set (19 piece set), consists of “Tank Set” + foils for fairing, mudguard, side covers + various other foils Part No.: 1250339

K 1200 S

Tank Set (3 piece set) Part No.: 1250330 Complete Set, 16 piece set for protection of the major painted surfaces Part No.: 1250335 Complete set + screen protecting foil Part No.: 1250336

F 800 GS

Tank Set (3 piece set) Complete Set

F 650 GS (Twin)

Tank Set (3 piece set) Complete Set

Part No.: 1250419 Part No.: 1250418

Part No.: 1250417 Part No.: 1250416

613

Accessories Handlebar Muffs Regardless of heated grips, the best way to keep the cold away from your fingers is with the classic handlebar muffs…Our muffs are made of strong waterproof material and are Teflon coated on the inside. They are very easy to fit, only takes a few moments. UV-ray resistant clear PVC plastic “windows” allows the rider to see the switch assembly on both sides to reduce pressing wrong buttons. These muffs are not a universal type but custom made for BMW motorcycles with or without hand guards. Sold as a set of left and right hand side. For all BMW models with or without hand guards. Handlebar Muffs

Part No.: 8110360

Wunderlich Extreme Temperature Testing!

All our winter equipment such as the Heated Seat Pads, Handlebar Muffs, Snow chains and other parts were tested at -20° across Turkey in the winter, with lots of snow, ice and sub zero temperatures.

Heated Seat Pad Heated seats are common in many luxury cars and bikes such as the K-LT. As the well-being and comfort of the rider has a direct effect on alertness and safety we have developed an add-on pad that can be ﬁtted easily on any BMW bike. The pad features: Complete with cables and connectors

Step-less heat regulator

• • • • • • • •

Durable carbon heating element for even heat distribution. Step-less heat regulator guided by electronic linear heat curve. Strong synthetic leather upper material. Available for rider and passenger. Safe, quick release power connection. Low power consumption. Complete with connectors, wires and regulator. Easy to ﬁt or remove (Velcro straps around seat)

As integrating a heated pad inside a seat is impossible without major and expensive surgery to the seat. This ﬁt-as-youneed pad is the best and most practical solution. The rider pad (main) incorporates the electronics and the regulator, the passenger pad (slave) is connected to it and both use the same regulator. Note: The passenger seat pad cannot be used on it’s own. Rider Pad (main) Passenger pad (slave)

Part No.: 1250098 Part No.: 1250099

News + Updates

Download all the updated catalogue sections from

www.wunderlich.de/update

614

Accessories Plugs and sockets for BMW Plug

This plug ﬁts the original BMW socket. Can be used to connect any appliance or charger. For all BMWs with original type socket. Original Hella. Sold without wiring. Part No.: 2024543

Socket

As a replacement or addition to the original socket. Sold complete with protecting cap, 50 cm long wires with connectors and a fuse.

Plug

Socket

Bracket

Socket kit for regular type plugs

Part No.: 8600670

Bracket

A mounting bracket for the socket. Has 4 bolt holes and comes with 4 cable ties to help installation. Part No.: 8600671

Socket kit for regular type plugs

This socket allows you to use appliances with normal car type plugs. The kit includes a socket and protecting cap, fuse, a couple of cable ties and about 90 cm of wire. Part No.: 8600675

Adapters for BMW Sockets Various adapters to connect 12 V appliances such as GPS systems, mobile phones or even an electric razor to your bike. For safety reasons they are restricted to 8 amp 896 watt @ 12V) for higher output the “Bikestart” set is recommended (see further on for details). The “Batteriewächter” (Battery Guard) adapter is a clever device that prevents your battery from draining because when voltage drops below 11 V it shuts down automatically. It will reactivate if the voltage has reached 12.3 V again. The removable red adaptor (tip) allows the plugs to be used with BMW or normal type sockets.

Adapter (Pic.1)

Allows connection of appliances to the BMW socket. Wire: 2 x 0.75 mm Ø, 0.25 m long (Ø = 0.03”, 9.8” L) Part No.: 2024580

“Batteriewächter” Adapter (Pic.2) • • • • • •

For BMW sockets, but ﬁts also car type sockets, (red adapter tip) Adapter with 11 V safety shutdown and 12.3 re-activating voltage LED operating display Built in fuse and short-protected Jointed plug = best ﬁt for vehicle 1 meter (~40”) long wire.

“Batteriewächter” Adapter (Pic.2)

Part No.: 2024581

Twin Adapter (Pic.3)

For BMW sockets, but ﬁts also car type sockets, (red adapter tip). Built in fuse, 0.25 m wire. Part No.: 2024582

Twin Adapter (Pic.3)

BMW-to-“standard” Adapter (Pic. 4)

This adapter ﬁts into the BMW “DIN” adapter and lets you connect appliances with standard size plugs. Part No.: 2024583

BMW-to-“standard” Adapter (Pic. 4)

615

Accessories CTEK Battery Chargers State of the art chargers with “clever” battery charging capabilities. It will not damage the battery or charger if the poles are connected incorrectly, is dust and waterproof (can be used outside/on boats) and will recognise the state of the battery to provide the best charging cycle. Both models can be left constantly connected to battery for long periods (trickle charge), this is important to keep the battery in good condition during the winter and prevent damage to it. Small lights show the progress of the charging. The chargers will not damage the electronic components of the bike as it does not create damaging voltage “spikes” when connecting or during charging. A new generation of chargers for the modern bike/ car/boat. Adapters to connect to BMW or cigar lighter socket available separately.

Note: All electrical appliances come equipped with a German mains plug for 220/240 V.

XS 3600

XS 800

Compact, small and fully automatic. For charging batteries up to 32 Ah or as a trickle charger for batteries up to 100 Ah. Comes with detachable battery clamps and connectors (for permanent connection) Part No.: 8600200

XS 3600

Suitable for batteries up to 120 Ah. Comes with detachable battery clamps and connectors (for permanent connection). 14 - 14.7 volts, 3.6 A max. charging. 3 stage charging including pulse charging for constant connection. Automatic and manual settings. For all Lead-Acid, Gel and Pure Lead batteries

XS 800

Part No.: 8600210

“Motorrad” magazine test verdict CTEK XS 800 “sehr gut” (very good) 26/2004: Summary: Very light, slim charger, easy operating and clear display as well as low consumption, especially on stand-by mode.

CTEK-Adapter

This adapter allows you to connect the CTEK charger to the original BMW socket or any standard cigar lighter socket. Built in fuse, wire and connector that ﬁts CTEK or Optimate chargers. Part No.: 8600216

CTEK-Adapter

Bikestart Set It is very difﬁcult to jump start a bike without having to remove lots of parts. There is always the danger of a short which can damage the electronics of the bike. The solution is the Bikestart system. Unlike the original socket (which would evaporate) Bikestart allows you to jumpstart your bike (or help someone else) without having to remove anything. Sold as a complete set containing the following parts:

Bikestart Set

Bikestart socket. 65 cm length with 6 mm² diameter wire Plastic protector cap Up to 90 A. load safe Ready to ﬁt Bikestart Jump Cable Set 160 cm long, 6 mm² diameter wire Insulated clamps Plug for Bikestart socket Set

Part No.: 2024568

Odyssey Batteries

Quiz: Who is powering whom? Answer: The Panther is started by the GS!!

616

These batteries with their amazing starting power are the solution for blinking ABS warning lights and non starting BMW bikes. See your model section for details.

Accessories Multi-purpose LED Light This really practical helper will be much appreciated when out on a trip. Emergency lighting, reading maps at night or as a tent light, there are no ends to its usage. The almost indestructible LED has very low power consumption (only 14 mA), so can be used for longer periods from the bikes’ battery. • • • • •

Suitable for the BMW socket or a regular car type cigar lighter socket.

2.5 m (~8.2 ft) long wire. Low power consumption, won’t drain battery even after hours of use. Small “crocodile” clip helps secure the light anywhere needed. Small light deﬂector.

Part No.: 2024551

Flash Killer Resistor When ﬁtting mini or LED after market indicators, they often have a lower current which means the indicators do not operate properly. This resistor restores the original load to the system for normal operation. Ready to ﬁt, with a sticky pad for attachment on the mudguard. Note: Fits all BMW bikes (not F 650 models)

Flash Killer

Part No.: 8200021

Indicator Reminder Forgetting to switch off the indicators can easily happen and might put you in a dangerous riding situation. With this electronic reminder you will hear a signal tone (only) after the indicator has blinked 30~ times. Easy to ﬁt. For all models

Part No.: 8600680

Signal Minder It is easy to forget the indicators ﬂashing with a BMW. The Signal Minder solves this problem by automatically turning the indicators off after 15, 60 or 45 seconds (this can be set according to riders preference). Additionally, a wire can be connected to the brake light, as long as the brake lever is activated the indicators will keep ﬂashing. Only when released, the Signal Minder starts counting the seconds. Very easy installation, replaces the original indicator relay. For all BMWs with separate left and right indicator switches. For all 4V Boxers + R 1200 C/CL (except R 1100 S + new generation 1200er) Part No.: 8600220 For all single cylinder F 650 models Part No.: 8600280

AutoSwitch The AutoSwitch uses the auxiliary lights relay for operation via the turn signal cancel button. Simply press the turn signal cancel button for a second or more and release to activate your additional lights. Repeat the process to turn the lights off. This allows you to keep your hands on the grips where they belong. The AutoSwitch can be concealed under the seat or a body panel. It will not interfere with the normal function of the turn signal cancel circuit. For all 4V Boxers (up to 1150 cc) and R 1200 C/CL Part No.: 8600230 For R 1200 S, R, ST, RT, GS, Adventure, HP2, Megamoto, K 1200 R, S + Sport, K 1200 GT (from 2006), F 650 GS Twin and F 800 GS Part No.: 8600217

Additional Lights

For increased safety and better night riding see your specific catalogue section for details.

Electronic Protector This device protects the expensive electronic components of your BMW. It removes those undesired and damaging voltage “spikes” in the system that can appear when jump starting, charging with unsuitable chargers etc. It also protects the light bulbs and increases their life span. All models

Part No.: 8600690

617

Accessories Indicator Lenses “ClearFlash” These popular white or “smoked” coloured indicator lenses fit instead of the originals, and improve the appearance of your bike. It requires an amber coloured indicator bulb to be fitted, unlike some amber bulbs our bulbs can be fitted straight away without need for modification to the electrical system or the sockets. Simply replace the lenses and bulbs. Sold either as a complete replacement set of 2 lenses and 2 bulbs or as single items. Replacement bulbs available.

Picture 1: White lens Part No.: 8144001

For single cylinder F 650 GS (single) /Dakar/CS White lens Set + amber bulbs Part No.: 8600992 Smoked lens Set + amber bulbs Part No.: 8600982 Replacement amber bulb Part No.: 8122028 For R 850/1100/1150 GS, R + Rockster, Cruiser (front + rear), CL (rear only), R 1100 S (rear only),

Part No. 8600992

Part No. 8144010 (2 x 8122029 + 2 x 8122028)

Part No. 8600982

This is a single lens for all original indicators looking like the one in Pic. 1 Single white lens Part No.: 8144001 Replacement amber bulb Part No.: 8122049 R 1100 RS (front) White lens. TÜV approved White lens right White lens left Amber bulb

Part No.: 8144003 Part No.: 8144002 Part No.: 8122049

R 1100 S Font: Complete lens and lamp unit. Rear: Single unit. White lens left (front) Part No.: 8144004 White lens right (front) Part No.: 8144005 Single white lens (rear) Part No.: 8144001 Replacement amber bulb (front or rear) Part No.: 8122049 For R 1150 RT (front, no TÜV approval) White lens Set + amber bulbs Part No.: 8600998 Smoked lens Set + amber bulbs Part No.: 8600999 Replacement amber bulb Part No.: 8122049 For K 1200 LT (front, no TÜV approval) White lens Set + amber bulbs Part No.: 8600993 Smoked lens Set + amber bulbs Part No.: 8600994 Replacement amber bulb Part No.: 8122049 K 1200 RS (1997-2001) Smoked lens Set + amber bulbs White lens Set + amber bulbs

Part No.: 8600981 Part No.: 8600991

F 650/800 GS (Twin), R 1200 GS + Adventure, HP2, Megamoto, R 1200 R, R 1200 RS, K 1200 R + Sport (front + rear), K 1200 S (rear only),

Part No. 8122029

Can be ﬁtted front or rear (order 2 sets for complete bike) White set for front or rear Part No.: 8144010 Replacement white lens Part No.: 8122029 Replacement amber bulb Part No.: 8122028 K 1200 S + R 1200 S (both bikes front only, rear same as K 1200 S)

K 1200 S front smoked grey

K 1200 S front white

White lens Set + amber bulbs Smoked lens Set + amber bulbs Replacement amber bulb

Part No.: 8600984 Part No.: 8600974 Part No.: 2099887

K 1200 GT (from 2006), front only White lens Set + amber bulbs

Part No.: 8600983

“Silver Vision” Bulb

The “Silver Vision” bulb looks silver when “off”, but shines in red/orange when activated. The nicest looking option for clear lenses. For all bikes with original clear lenses (1200 C Independent, 1150 RS etc which use the 8122049 bulb) and for use with the regular indicators where it needs one of the small pins ﬁled off (takes only seconds to do and works very well). 12 V 21 Watts

With amber bulb

618

With Silver Vision

Part No.: 2099840

Accessories LED Indicator Insert Set This high-tech LED insert replaces the original bulb of the standard BMW indicator. The numerous yellow-shining LED’s produce a bright light and do not cause delay when switched on. A special resistor is already included in the insert to ensure correct indicating frequency. Can be used for yellow or white indicator lenses. Available also option with integrated brake light function (BrakeFlash), additional wires for easy installation supplied. Sold as a set of two inserts (left and right side). For F 650/800 GS (Twin), K 1200 R + Sport, R 1200 GS, Adventure, HP2 + Megamoto, R 1200 R and R 1200 S: Fits both the front and rear (order 2 sets for complete bike). K 1200 S + R 1200 ST: For the rear only. Insert Set (standard) Insert Set (with BrakeFlash)

Part No.: 8601065 Part No.: 8600990

For R 850/1100/1150 R + Rockster, GS (front or rear), R 1100 S (rear), K 1200 RS + GT up to 2005 (rear), R 850/1200 C + R 1200 CL (rear). LED Insert

Part No.: 8601060

R 850/1100/1150 R + Rockster, GS, R 1100 S, K 1200 RS + GT (up to 2005), R 850/1200 C + R 1200 CL Only for rear! Insert Set (with BrakeFlash)

Part No.: 8601050

Clear Rear Light / LED To replace the original red/orange lenses (also indicators) to clear ones is a popular modiﬁcation and gives the bike a lighter and cleaner appearance. For the rear light, two versions are available: Either a clear lens with a matching standard type red coloured bulb, or the high-tech, delay-less version which includes a complete LED brake/light unit perfectly matched to the standard BMW or Can-Bus system. Easy to ﬁt. For R 1150 R, K 1200 RS, K 1200 GT (up to 2005) and 1200 HP2 + Megamoto Clear lens + red bulb Clear Lens + LED unit

Part No.: 8601088 Part No.: 8601085

For R 1200 C, R 1200 CL + Montauk Clear lens + red bulb

Part No.: 8601089

R 1200 R, K 1200 R, S + Sport Clear lens + red bulb Clear Lens + LED unit Replacement bulb

Part No.: 8601084 Part No.: 8601083 Part No.: 8601082

LED Rear Light Insert Same as with the indicators, this replaces the standard type bulbs of the rear light/brake unit. Easy to ﬁt. can be used with both standard or clear (white lenses) F 650 ST/Dakar/GS (incl. LED number plate light) Part No.: 8601040 R 80/100 GS (incl. LED number plate light) Part No.: 8601010 R 1100 S (Without Integral brake system) + F 650 CS Part No.: 8601030 R 1100 S (with Integral brake system) Part No.: 8601035 R 850/1100/1150 GS + R 850/1100 R (Without Integral brake system) Part No.: 8601000 R 1150 GS + Adventure (With Integral brake system) Part No.: 8601020

Clear rear light lens for the LED insert

Makes the rear look even nicer. Only to be used with the above LED inserts (or with the use of standard type red bulbs) R 1100 S + F 650 CS

Part No.: 8601070 Clear rear light lens for the LED insert

619

Accessories HT Coil A replacement part in top OEM Quality from famous manufacturer BOSCH. For all 850/1100/1150 single spark models. Part No.: 8122713

Starter Motor / Carbon Brushes / Solenoid Replacement parts in OEM Quality:

Starter Motor

A replacement starter motor from OEM manufacturer VALEO. Improved power output and long life. This is a new, unused starter, not a reconditioned one! For all 2V Boxer Part No.: 8122725 For 850/1100/1150 GS, RS, R, RT, R 1100 S and R 1200 CL + C Part No.: 8122724

Carbon Brushes

Carbon brushes for the starter motor. Made by BOSCH, the known specialist, which ensures long life with good wear resistant properties. For all 850/1100/1150 models (not 1200) Part No.: 8122711

Starter Solenoid For all 4V Boxer (not new type 1200) Part No.: 8122712

2V Boxer Parts

For more replacement parts see the 2V catalogue section for details.

Additional Lights

Illuminator

Life Insurance The excellent additional lights makes night riding a joy, more than once they made sure we were seen just in time. In countries where bikes are not that common this is especially important.

620

Micro Flooter

Additional lights are gathering more and more fans, the main reason is safety- “See and be seen”. Properly mounted and adjusted (to avoid blinding oncoming traffic…) they will greatly enhance night vision in every weather condition compared to the sometimes poor original lights. They are best worked in conjunction with the “low” beam (not legal in every country, please check!!). The Micro-Flooter has a compact square shaped black metal body. Our tests showed that it‘s high tech projector technique produces a powerful light despite the smaller than most size. It produces a soft-light transition at the edge of the light beam, and illuminates the road sides almost like a cornering light (helps to avoid wildlife jumping out of bushes at night). For details about additional lights for your bike see the model sections of the catalogue for details.

Accessories Battery Grease Protects the poles and connectors of your battery from corrosion. 50 ml tube. Part No.: 2024547

Long Lasting Grease High quality grease with added MOS2 (Molybdenum), for shafts, bearings etc. 100 g

Part No.: 3024538

Copper Paste Copper paste to prevent parts seizing, especially useful for exhaust bolts and shafts. Resistant up to 1000°C. 100 g

Part No.: 3024526

Threat Locking Fluid Useful to prevent important bolts and screws from coming loose. “Medium Strength” allows problem free removal of the bolt, “High Strength” is suitable for load carrying/safety bolts. Medium Strength High Strength

Part No.: 3024523 Part No.: 3024535

Omni VISC 1002 Sealant This is a silicone rubber to glue and seal materials that have different heat expansion rates. Stable from –70 – 200 C°. Water, petrol, oil and weak acid resistant. Not paintable. Is also used by BMW workshops. 90 g tube Part No.: 5424020

Reinz 25 g Sealing Paste This is a sealant to be used as an addition to gaskets. This ensures a tight and dry connection. 25 g

Part No.: 5424010

HP Fuel Filter High dirt and water ﬁltering ability despite small (31 mm) size. Does not affect ﬂow rate Part No.: 00200

“T” Connector Aluminium “T” connector for all fuel pipes. Part No.: 1157901

Fuel Filter A replacement part in top OEM Quality from known manufacturer MAHLE. Recommended to change every 40,000 Km. For all 4V Boxer (not new type 1200) Part No.: 8122710

621

Accessories Replacement Air/Oil Filters in “OEM” quality Bike Model

Oil Filter

F 650 + ST

8410063

Oil Filter Gasket Set

Oil Filter Tool

Air Filter 8410061

F 650 GS (single) + Dakar

8410063

8410016

F 650 CS

8410063

8410027

F 650/800 GS (Twin)

8400010

2V-Boxer without oil cooler

8410008 (2-piece)

8410011 incl. gasket, “O”-ring and washer

8410001 (round type) 8410002 (flat type)

2V-Boxer with oil cooler

8410009 (2-piece)

8410011 incl. gasket, “O”-ring and washer

8410001 (round type) 8410002 (flat type)

R 850/1100/1150 RS, RT, R + Rockster, GS + Advent.

8410064

5524017

8410062

R 1100 S

8410064

5524017

8410014

R 1200 C + CL

8410064

5524017

8410013

R 1200 GS, Adventure, HP2, Megamoto, RT, ST, R, S,

8400010

5524021

8400015

K 1100 RS + LT

8410064

5524017

8410012

K 1200 RS + GT (up to 2005)

8410064

5524017

8410003

K 1200 S/R + Sport, K 1200 GT (from 2006),

8400010

5524021

8400020 (K 1200 S needs two filters)

5524021

BLUE Air Filters In the model sections of this catalogue you can find detailed information about our re-usable, Longlife Performance BLUE air filters. Available for all BMW models in our program.

Oil Filter Tools A service tool for easy removal or ﬁtting of the oil ﬁlter without damaging it.

All R 850/1100/1150, R 850/1200 C + K 1200 RS/LT + GT (- 2005) Part No.: 5524017 5524021

5524017

R 1200 GS + Adv., HP2, Megamoto, RT, ST, R, S K 1200 S/R/Sport, K 1200 GT (from 2006)

This tool allows changing of the new 1200 type oil ﬁlter without damaging the ﬁlter. The original one is fairly expensive and not user friendly, therefore we designed an all new tool that can be used in conjunction with the existing tools supplied in the tool kit: Either the spark plug tool or a matching “Torx” key. The result is not only functional but also a beautiful looking tool. Precision machined high quality “Dural” aluminium alloy (not cast) and anodised blue. Part No.: 5524021

Magnetic Sump Plug The strong magnet ﬁtted to the sump plug traps those knifesharp, abrasive small ferrous particles and therefore reduces the overall wear of the engine. Helps you analyse damage and detect possible wear earlier. Note: It is recommended to be change the copper washer whenever plug is removed to avoid annoying oil leaks (also with original plug). So, whenever changing oil don’t forget to order a new one (8154014 already includes new washer).

F 650 (single cylinder)* Copper Washer 2V.-Boxer Copper Washer R 850/1100/1150 all + R 1200 C + CL Copper Washer K 1100/1200 RS/GT (-2005) + 1200 LT Copper Washer R 1200 GS/RT/ST/S/R + K 1200 R/S/Sport + GT (from 2006)** Copper Washer

Part No.: 8154010 Part No.: 8154011 Part No.: 8154010 Part No.: 8154011 Part No.: 8154012 Part No.: 8154013 Part No.: 8154010 Part No.: 8154011 Part No.: 8154014 Part No.: 8154015

* Not for F 650 GS, Dakar + CS (Factory fitted already). ** Already includes new copper washer.

622

Accessories Filter Plus This powerful magnet sticks to any steel spin-on oil filter. All the ferrous microscopic particles that the oil filter element cannot hold will stick to the inside of the filter. These knifelike particles, if not removed from the oil circulation, will slowly rip up the paper element of your filter, and will cause engine wear. When changing oil filters, the metal stays inside the filter, and the Filter Plus can be fitted to the new filter. Tip: Fit it also to your car, boat, truck, lawn mower or any other engine that uses a metal oil filter.

Part No.: 8410020

“Filter-Plus”

Powerful Neodymium magnet

Damaging metal particles missed by your oil ﬁlter are trapped by Filter Plus

Clean return oil

Oil Filter metal casing Filter Element Dirty engine oil

Oil Funnel This practical Wunderlich-made funnel is made of a flexible plastic material and allows you to fill engine oil without spillage and mess. The funnel weighs only 50 g and because it folds flat will fit in any tool box. The hole in the bottom can be enlarged with scissors if needed. Useful not only for K models. Part No.: 9002090

Automatic Brake Bleeder Easy to use brake bleeder. When “pumping” brake lever the valve at end lets ﬂuid out but no air in. Note: Not suitable for ABS or Integral ABS, let ofﬁcial dealer bleed brakes with those! Part No.: 5524032

Feeler Gauge Set 9 blades for accurate valve clearance adjustment. Sizes: 0.03; 0.05; 0.08; 0.10; 0.12; 0.15; 0.18 ; 0.20 and 0.25 mm Part No.: 5524001

Tuning

See the model sections for details about our many tuning and performance components.

623

Accessories Carbtune Synconiser A smooth running Boxer engine is music to the ears. A synchronised motor has nicer tick-over, better throttle response and lower fuel consumption. The Carbtune II uses 2 polished pistons (no Mercury used) that move up or down to show the difference between the two cylinders. The two vacuum hoses are connected to the underside of the throttle bodies when measuring. Comes with a quality soft cover and all adapters needed. Note: Only for 850-1150 cc Boxer engines

Carbtune II

Part No.: 5524020

Easy Park Bike Mover This mover is a useful tool when manoeuvring a heavy bike in tight spaces (garage back wall etc.). The wide plate leaves plenty of space for the centre stand. • Easy manoeuvring with bike on, plate can move to front, back, sideways or turned 360°. • With a small additional support both wheels can be lifted clear of ﬂoor (good for longer parking periods). • Two versions available: “XL” for up to 320 kg/~705 lb. and “XXL” for up to 400 kg/~880 lb. (for instance heavy bikes such as K 1200 LT) • 4 twin polyamide (plastic) wheels (gentle on ﬂoor surface). Bearings ensure easy 360° turning and moving. • 4 brakes. • Protective mat to prevent slipping of stand. • Ground clearance can be adjusted.

We recommend it as a very useful tool for anyone who wants to easily move their bike. XL up to 320 kg XXL up to 400 kg

Part No.: 1624660 Part No.: 1624670

Bike Lifters See model sections of this catalogue for a bike lifter for your bike

Brake Lever Holder Many service operations or repairs require the bike to stand on the centre stand, or even on the side stand. The potential for disaster, if the bike falls off the stand, is great, one wrong move is all that’s needed. The brake holder makes sure that the front wheel stays put and prevents the bike from moving forwards. It is also recommended to use when transporting the bike in a van or a trailer, as it reduces the strain on the straps and helps to keep the bike from moving about.

Part No.: 5525405

624

Accessories Wheel Mounting Tool If you have ever tried to install your rear wheel, you know what a pain in the you-know-where it can be to support the wheel while getting that first bolt started. Installing the wheel is a snap with this clever little helper: Simply screw the tool into one of the threaded holes in the final drive and slip the wheel on. The tool supports the wheel while you start fitting the remaining bolts. Then just remove the tool with the use of an Allen key. This tool belongs in every rider‘s tool kit or tool box, or both. Machined of solid aluminium and anodised blue. For all 850/1100/1150 models, all K models (up to 2005) and R 1200 C/CL (not for new 1200 R + K models) Part No.: 8166155

Digital Pressure Gauge with Clip This pressuge gauge has features that make it stand out from the rest. The built in clip allows this little helper to be attached anywhere. The select button allows you to choose any one of the following measuring units to show up on the digital display: BAR, PSI, KPA and kg/CM. The display shuts down automatically after a short while to save on battery power. Max. measurable pressure is 10 BAR (motorcycle tyre is around 2.5 BAR). The gauge can be opened in order to replace the small battery. And just for those unexpected incidents - a built in compass will help you ﬁnd the way to the next petrol station. Part No.: 1900239

Digital Tyre Pressure Gauge Small and accurate tyre pressure gauge. From 0.05 - 7 Bar measuring range. Put one in your tool box, as petrol station gauges are often inaccurate. The battery will last a lifetime. Part No.: 5524029

“Flaig” Tyre Pressure Gauge This precision instrument has a metal body and 90 deg. connection for easy access to the motorcycle tyre valve. No pressure loss and easy reading of the pressure with a high quality display. When removing the gauge from the tyre the needle stays in position until released, this allows better reading of the result. From 0-4 bar/0- 57 psi. With a max. tolerance of only 1% (DIN 74720). Part No.: 5525402

Pocket Tire Plugger For tubeless tyres. The “Stop & Go” Tire Plugger allows for easy and effective “on the spot - on the wheel” repair without the need for vulcanising paste (glue). The specially formed mushroom formed rubber plugs are quickly inserted into the tyre with use of the special tools (supplied). When the tyre is pumped up afterwards, the air pressure pushes the mushroom head against the inner side of the tyre and seals it off completely. The set consists of 15 rubber inserts and ﬁtting tools as well as instructions, all ﬁtted inside a small Nylon bag (18 x 10 cm, ~ 350 g weight). Part No.: 5524028

625

Accessories 90° Valve Stem Adapter Filling the tyres with air can be difﬁcult, especially with the normal petrol station equipment. With this adapter it is made easier. Always keep one in your tool box, next to our digital tyre pressure gauge to obtain the correct tyre pressure every time. Safety Note: Only use for filling, not for permanent fitting on wheel! May cause damage to valve and cause dangerous deflation when riding!

Part No.: 5525401

Aluminium Valve Stem

See model sections of this catalogue for details.

Snow Chains These chains ensure grip even in extreme conditions. The chains have been tested by us in severe winter conditions in Austria, Serbia and all the way to Syria. Even when cars were stranded in the snow we continued riding. The chains are quickly ﬁtted to the wheels of the Enduro bikes and are recommended to be used for speeds up to 50 kmh/~30 mph (we tried it up to 80 km/h). The chains are made of strong hardened and galvanised steel links incl. springs. The chains cannot be used together with a splash guard or rear hugger, as the chains will be rubbing against them. 21” wheels (90/90) 19” wheels (110/80) 19” wheels (100/90) 18” wheels (150/80) 17” wheels (150/70) 17” wheels (140/80) 17” wheels (130/80)

Part No.: 9002197 Part No.: 9002196 Part No.: 9002194 Part No.: 9002199 Part No.: 9002195 Part No.: 9002198 Part No.: 9002193

“Elephant Skin” Inner Tubes Extremely thick walled inner tubes for extreme conditions, incl. strengthened valve stem. For 17” wheels with angled valve For 18” wheels For 21” wheels

Part No.: 4600151 Part No.: 4600152 Part No.: 4600155

Acerbis Spark Plug Box This tough plastic box keeps a spare spark plug dry and ready for use, and prevents the electrodes bending. It makes good sense to have one in your tool box or tank bag, especially as it does not take a lot of space and could get you out of a pickle in some remote location. Part No.: 5524030

“FixNippel” Emergency Cable Repair Kit Where is a nipple when you need one?? This box has a choice of various nipples and cables in various diameters for emergency repairs. If you ever get stuck in the middle of nowhere with a broken cable, this little box may save the day. It ﬁts neatly in your tool box. Part No.: 5524008

626

Accessories Motorcycle Covers Bike covers ensure your bike stays clean and dry and does not deteriorate in appearance and ultimately in value. We have produced 2 types of high quality bike covers specially made for your BMW by one of the best cover manufacturers in Europe.

Outdoor • • • • • • • •

Soft, ﬂexible material with good breathing properties. A rubberised material that is 100% water proof and does not ﬂap. Heat and cold resistant Strong but soft coated material. Prevents damage to paint on inner side. UV stable Tightening band Additional plastic loops Storage bag included.

For all BMW models

Outdoor

Part No.: 1088010

Indoor

This cover is made of the best quality cloth to ensure your bike stays clean and dry inside your garage. It absorbs moisture and reduces the condensation effect of moisture on the metal parts. The thick, padded material ensures there is no damage to the paint. • 2 layers: Inner very soft material, outer moisture repelling silk-like material. • “Breathing” membrane material, moisture is “transported” to outside • UV stable • Tightening band • Additional plastic loops • Storage bag included

This silky cover wraps your BMW like an expensive present! For all BMW models

Indoor

Part No.: 1088020

First Aid Kit A practical ﬁrst aid kit mounted directly behind the number plate. • • • • • • •

Content complies to German DIN 13167 code for First Aid kits. Information about rider and passenger for emergency doctor/medic. Foldable, removable and reﬂective warning triangle. Only 3 cm thick. EU accident report in 10 Languages. Light Stick (lasts for about 12 hours light). All major European telephone numbers (Police, Recovery, Emergency, Embassy etc). • Strengthens the number plate. • Lockable, easy and quickly to reach in case of emergency.

Part No.: 1724625

Motorcycle First Aid Bag Like the old saying goes: “It‘s better to be safe than sorry”. So, be prepared with this compact ﬁrst-aid kit. It includes all the basic aid material, scissors, blanket and instructions. Fit one underneath the seat or seat hump or in tank bag. Strong red Nylon bag. Content complies to German DIN 13167 code for First Aid kits. Part No.: 1724624

News + Updates

Download all the updated catalogue sections from

www.wunderlich.de/update 627

Accessories Motosafe II Ear Plugs In our opinion the best ear plug available. Each plug is made of soft silicon with small “fins”, and on the outer side the removable noise filters can be inserted. Two filters are available, “Normal” or “Strong” to filter out noises depending on preference. They filter wind noise very effectively without impeding normal communication. The plugs are very comfortable to wear which is important on long riding trips. The set of two plugs and 2 filter sets comes in a small carrying bag. Part No.: 9002100

Sun Visor Strip This strip is simply attached to the upper part of the helmet visor and offers an effective protection from blinding sun light without impeding the viewing ﬁeld. Fitting it is very easy: Place it onto the helmet, sprinkle with water and smooth out air bubbles with the special spatula (included). Fits almost all visor types. Part No.: 8600710

Visor Viper A small but brilliant and functional part. The viper is quickly attached to the ﬁnger with Velcro and the rider can easily clear the visor. The visor is 10 cm long with a very soft rubber lip, this ensures it effectively clears the visor without damaging it. Part No.: 2024010

Throttle Rocker This genial little helper is a must for all riders. It quickly mounts onto any twist grip, and reduces the load on the hand. It is easy to ﬁt and remove (when not needed) and virtually indestructible. On long trips the throttle hand ﬁngers can get tired, the Throttle Rocker prevents this as now most of the pressure is passed on to the hand itself. It is not only useful for motorway use, sometimes the constant change of speed on twisty lanes can be tiring as well. Even if you got a cruise control system, the Throttle Rocker gives you an alternative, as it allows variable speeds. Throttle Rocker*

Part No.: 8600120

* Note: This part is not available for sale in the USA!

unbreakable

safe braking

comfortable throttle action

optimised shape

628

Wunderlich Vario Scarf This practical multi purpose sleeve is an accessory that any rider who has ever tangled with a normal scarf, balaclava or bandana will appreciate. Simply pull up to protect face and neck when wearing a helmet. It closes the gap from helmet to jacket and is always good to have in changing weather conditions. The sleeve shape makes this a versatile scarf and can be worn in any conﬁguration by rider or passenger. The material is a mix of cotton and soft elastic Lycra which will stay tight around the neck without strangling. We all liked this so much that we produced our own Wunderlich version. Part No.: 9002190

Boxer-Shorts Treat yourself or any Boxer-fan friend with these quality shorts and gift box. We had lots of fun designing these shorts! Whoever sees them and knows what a Boxer is (other than Muhammad Ali or a funny faced dog) cannot hold back a smile… They are made of 100% dark blue quality cotton in a modern cut with a wide elastic waistband and the Wunderlich Boxer engine logo in the middle. The shorts have a large “Boxer Shorts” printed on the sides and the “Boxer” engine emblem on the front. The Boxer Shorts come in their own “Boxer” box and make an ideal gift for any BMW enthusiast. Size L Size XL Size XXL Size XXXL

Part No.: 9002206 Part No.: 9002207 Part No.: 9002208 Part No.: 9002209

Accessories Rider Shirt “Wunderlich BoxerTeam” The Wunderlich Rider Shirt - as worn by our professional racing riders. Made of strong, permeable to air material and additional meshed arm pit vents. This shirt will look great on you, not just on the race track! Size M Size L Size XL

Part No.: 9003100 Part No.: 9003105 Part No.: 9003110

Multimedia Bag “Navigate” Navigation systems are getting more and more popular, and especially systems based on Pocket PC’s. We have tested this ourselves and came to the conclusion that these are indeed superior to built in systems. Therefore we have developed the “Navigate” bag to allow use of such a system on a motorcycle. The features of this bag are: One large compartment for equipment such as Pocket PC, GPS add-on, cables and mobile phone etc. After placing the appliances inside the compartments the bag is pumped up so that the contents are pressed against the clear top. This stops the PC moving around and allows better viewing of the screens as well as the use of touch screens. The bag has a plug that ﬁts a BMW socket, and inside the bag is a (cigar lighter) socket so appliances can be operated directly from the 12 volt system or charged. The bag is made of water resistant material and includes a carrier strap. Can be fitted to the following Wunderlich tank bag base plates: Part Nos.: 1250131, 1250165, 1250170, 1250170 and 1250168, or onto any current Wunderlich tank bag that has a removable map holder. For all other bikes an Universal Adapter is available (order separately) to mount the bag directly onto the tank. Also available is a rain cover, recommended for very wet conditions. Multimedia Bag “Navigate” Universal Adapter Rain Cover

Luggage and bags For the full range of our luggage solutions see the model sections of this catalogue.

630

Part No.: 1250270 Part No.: 1250260 Part No.: 1250265

Accessories Strapping Loops This useful bracket can be bolted with bolts up to 6 mm, and provides a solid anchor point for strapping luggage to the bike. Made of black anodised aluminium. Sold as a single part. Part No.: 1250045

Luggage Loops The loops give you the option to strap more luggage to side/ top cases. They are made of galvanised steel, and the holes can be sealed to prevent water and dirt entering with matching seals. We recommend using our luggage straps. Luggage Loops Seal, Nut + Bolt (2 needed per loop)

Part No.: 1725410 Part No.: 1725411

Hünsdorf 2 Litre Jerrycan Tough burst-proof 2 litre canister. The distance a bike will do on 2 litres is about 25-30 km (15-19 mi), and could get you to the next petrol station in case you run out of fuel. Suitable for all automotive fuels. Easily strapped to luggage or bike with built in loop (see our luggage loops for picture). Includes ﬁlling nozzle and safety valve. 2 Litre Jerrycan

Part No.: 1624547

Strap Set “Velcro”-type hook and loop straps are well known for their versatile usage. We use them to secure tank bags to tanks, toolrolls in topcases etc. This set includes 1 metre (~39”) each of hook and loop straps. Both sides are self adhesive. Part No.: 1900105

Tie Down Strap This strap is nicely made of strong woven nylon and has a spring loaded buckle, which holds tightly and requires very little effort to release. Unlike Bungee-type straps, this one does not stretch. The strap is 20 mm (~0.8”) wide and measures approximately 150 or 200 cm (~ 59 or 78”) in length. Perfect for attaching camping gear or any other items. 150 cm (~59”) 200 cm (~78”)

Part No.: 1724529 Part No.: 1724530

Heat Resistant Mat In some unfavourable conditions the cases can suffer severe heat damage (especially 1150 GS + R). This does not only affect original cases, but also aftermarket ones. The reason for that is that the heat from the exhaust and engine is accumulated in one specific area. The air stream at the back won’t clear the hot air, especially when riding two-up. The 150 x 180 mm (~5.6 x 7”) large heat resistant mat will protect any type of case. The back is pre coated with a self adhesive layer for an easy attachment. Made of glass fibre in a special process (100% asbestos and ceramic fibre free!), and is heat resistant to direct heat up to 180°C (365 F). Part No.: 1724626

631

Accessories “Highway” Bag This is a very versatile motorcycle bag. It has a massive 48 litres of volume, and the various strapping options make it really easy to secure to any luggage rack of any bike in double quick time. A set of wide padded carrying straps is included so it equally easy to handle the bag when not on the bike. The bag is designed to hold two full size helmets, and the gloves and other items can be stored in the separate side compartments. Made of PU coated Nylon material. To avoid water penetrating through the zipper, it is covered and protected by an additional ﬂap. The bag includes two removable carrying straps in a addition to the permanently connected short handles on each side + the rucksack straps. Part No.: 1250038

Biker Rucksack A practical daily companion. Unlike many other bags, this one has a long zipper for the main compartment, which makes it easy to get stuff in and out of the bag, especially bulky objects. Inside the main bag is a padded compartment, a conveniently positioned cable exit make this an ideal place for your MP3 player or ipod. The additional external compartment has its own zipper and can be accessed without opening the main bag. A separate document compartment on the lid provides even more practical storage place, and on top that is a strong adjustable “zigzag” strap, where you can secure your gloves when not riding. The length adjustable, wide and comfortable carrying straps are enhanced by fully adjustable and ﬂexible chest straps, as well as a strong and adjustable hip strap (both with quick release clips). All these ensure that the bag is comfortable and secure, during high speed riding or when hiking. Part No.: 1250026

Picnic Rucksack We like nothing better than to take our BMW’s and ride out for a picnic in our own region of the Eifel mountains. For this we take the purpose made, insulated bag complete with a fully equipped “tool box”: The content included with this bag: • • • • • • • • • • •

2 plastic plates. 2 plastic wine glasses. 1 pepper and one salt dispenser. 2 Knifes, 2 forks and 2 tablespoons. One serrated knife to cut bread or cheese. One multi-tool with corkscrew, bottle opener and knife. 2 napkins, made of 100% cotton 34 x 34 cm each. 1 plastic cutting board. 1 butter box. Separate + removable thermally insulated bottle carrier. All the supplied content is safely secured and held in place by purpose made straps.

The thermally insulated main bag is roughly 38 x 9 x 25 cm (~15 x 3.5 x 9.8”) large, and will allow you to store a good quantity of food. A small external compartment and a small net on the side offer additional storage possibilities. The bag has a small padded carrying handle and wide, comfortable rucksack straps. This bag will help you get to your destination, whether on bike or by foot, with all the components needed for a successful picnic!

632

Part No.: 1250055