PICTURE FRAME Materials used: -A plastic bottle -A rule -Scissors -A cutter (retractable consisting of a long blade cutter tool inside a plastic sleeve) -Carton -Tweezers -A photo
Step procedure http://youtu.be/dukwNu9TOes
•
bottles in the shape of rabbits with sweets
• bases for cupcake polka dotted, or whatever you have at hand • White cardboard • Tape baby organza • Glue • Permanent microfibre black • Paint pink and white acrilina • Sticker with lyrics • Moving eyes, 1 pair Preparation step by step: 1. clean plastic bottle container. Leave quietly 2. mark two ears in white cardboard and outline it with marker and then paint the inside with acrylic pink 3 glue ears in a cupcake stand by turning and assemble a small monkey with organza Ribbon and stick it on your forehead. 4 both hands on the bottle with white acrylic paint and draw with marker as well as the mouth of the rabbit. 5 paste moving eyes and sticker letters with the desired message. 6 fill the bottle with desired, candy, etc. and cover with full Hat
Lamps Materials: • Plastic caps • Universal glue • Pedestal table base • Lamp low consumption Procedure, step by step: 1 we will start cleaning caps, in the case that many colors can join them by color or mix them to give a touch more fun. 2. with universal Glue creates a tower of caps as shown in the image. 3. the base of the pedestal table will need another support base to hold the Tower of caps. 4. Lastly make all connection and enjoy this charming recycled Velador.
vases
Materials • •
•
plastic spoons
•
Silver paint
•
Silicone gun.
glass jar cut glass bottle or glass bowl
Step by step 1. take plastic spoons and divide them, cutting and keeping shovels them. 2. with silver spray paint the blade spoons and set aside. 3 in the event that we decide to use a bottle and not a bowl is necessary to cut it. To do this we must embed white cotton with abundant alcohol burn. Take into account that the length of the thread should be suffice
to turn to the bottle. Then tie it around the Central magnificent, knowing that cutting will be one more centimeter above. Knotting thread cut excess edges flush, and turn it with the matches or a lighter. Prior to performing this operation wash your hands thoroughly to remove the alcohol that may remain in them. Leave that consumed the alcohol and the thread turns black. Immediately after the previous step enter the bottle in a deep container with water cold, moving it slightly, a noise indicating that you occurred will be heard the break. When the bottle is not cut, gently tap or to repeat the above steps. He is recommended to achieve a best finish sanding the part that was cut, to avoid possible injuries. 4 paste the buckets at the top of the container, starting half upward. 5. for the vase option begin to stick spoons from the mouth of the bottle, making sure that so that as you go down you get to increase the volume and to form a flower similar to the artichoke.