Hella’s new LEDs focus on lighting work zones around vehicles LED TECHNOLOGY AND CREATIVE THINKING MAKE WORKING AROUND VEHICLES MUCH SAFER. HELLA HAS ANNOUNCED THREE NEW VEHICLEMOUNTED WORK LAMPS THAT FLOOD WORK SITES WITH LIGHT
H
ella has announced three new vehicle-mounted work lamps that offer fit-and-forget durability while providing high-powered flood lighting, or focused beam task lighting. The floodlight offers a 40m spread of light at 1 Lux, reaching 55m, while the long range lamp penetrates over 100m at 1 Lux, with around a 20m spread. The new Power Beam S-Series are bolt-on lamps on tilting mounts and are available in both flood lighting (IGA 996 588-201) and long-range beam (IGA 996 588-211) configurations for vehicles like diggers. The new housing has integrated cooling fins to dissipate heat from four high-power LEDs that pump out 1850 lumens, yet they are lighter at 400g, and draw less power — 19W — than previous models. The lamps are 127mm tall on the mount, 87mm deep, by 112mm wide. Multivolt circuitry and simple DT plug connectivity makes them an easy fit to 12 or 24V systems. The latest version of the M70, one of New Zealand’s most popular small work lamps, has upped its light output from 850 to 1000 lumens. The two LEDs are housed in a corrosion-resistant
case weighing just 230g. They are rated to IP6K7 against dust and water immersion, and IP6K9K protection against jet-washing and steam cleaning, and they are compatible with 12V and 24V systems (Multivolt). These tiltable flood lamps come with a single M10 bolt fixing and a 2m sheathed cable with DT connectors, making them a suitable addition to each side or to the rear deck of many utility or work vehicles. They will provide 1 Lux of lighting at a range of 35m when mounted 2.5m high.
Hella has also taken the safety potential of sealed LED lights to the next level with a new low-profile light designed to be fitted to the sides of emergency or municipal vehicles, like rubbish trucks, or heavy equipment. Designed to be surface-mounted and aimed down, each unit creates a broad pool of light illuminating the ground around the vehicle perimeter, making it a much safer working environment. At 243mm long and protruding just 38mm in height, they will integrate neatly into vehicle beltlines, trailer deck rails, or into exterior recesses, ideally positioned to offer great ground illumination. The units are offered in two power ratings — the 1200 lumen FMS 1200 (1GB 996 098-501) draws 14W, while the FMS 2500 (1GB 996 098-511) draws 28W. They are pre-wired with 500mm of cable. They are also Multivolt equipped and protected to IP6K7 and IP6K9K standard. For more information, see hella.co.nz.
Technology with Vision
LUMINATOR 3.0 LED High Beam Driving Lamp
Designed with style, built for performance - the perfect lighting choice for taking your on and off road adventures to the next level. The new distinctive position lamp function is made possible by HELLA’s innovative Edge Light technology. Must be mounted according to local installation regulations for high beam and position lamps
0800 4 HELLA (0800 443 552) for your nearest HELLA stockist Luminator Half Page 220x156.indd 1
www.hella.co.nz 18-Mar-21 10:15:03 AM
