Concrete Pave Stones
Signature Stone Series ™
IMPROVING YOUR LANDSCAPE™
Signature Stone Series ™
Add a personal finished touch to community and commercial paving projects with Signature Stone™. Pave stones recommended for engraving can be selected from a variety of Pavestone Company paving stones. Our commemorative line is great for historical sites, dedications and fundraisers, and these engraved paving stones are perfect to identify fire lanes or other permanent markings. Because they are manufactured to the same high standards, Signature Stone™ Series can be designed into any paving application that incorporates Pavestone Company products. COMPOSITION AND MANUFACTURE Signature Stone™ Series is made from a “no slump” concrete mix. Made under extreme pressure and high frequency vibrations, Signature Stone™ Series have a compressive strength greater than 8000psi, a water absorption maximum of 5% and will meet or exceed ASTM C-936. INSTALLATION 1. Excavate unsuitable, unstable or unconsolidated subgrade material and compact the area which has been cleared. Backfill and level with dense graded aggregate suitable for base material (typically 4-6 in. of compacted base for light vehicular and pedestrian traffic) or as otherwise directed by Site Engineer/Architect/Landscape Architect. 2. Place bedding course of washed concrete sand conforming to the grading requirements of ASTM C-33 to a uniform depth of 1-11/2 in. (25-38mm) screeded to the grade and profile required. 3. Install Signature Stones™ Series with joints approximately 1/8 in. (3mm). 4. Where required, cut pavers with an approved cutting device to fit accurately, neatly and without damaged edges. 5. Tamp pavers with a plate compactor, uniformly level, true to grade and free of movement. 6. Spread sand to 1/8 in. thickness over entire paving area. 7. Make one more pass with plate compactor to fill joints with sand.
APPLICATIONS Memorials • Fundraisers • Fire Lanes • Plazas Historical Sites PRODUCT INFORMATION Signature Stone™ Series engraving is available in a variety of shapes. We recommend the following pave stones.
Holland Stone
City Stone™ I
Holland Stone Parkway™ Series
City Stone™ III
Roman Cobble™
Cobble-Stone
Typical Cross Section Of Concrete Paver Installation
Complete installation & specification details are available by contacting your Pavestone Sales Representative.
Sand-Filled Joints Pavers
Note: Colors are shown as accurately as possible in brochures & samples, but due to the nature of the product, regional color preferences and variables in print reproduction, colors may not match exactly. For best results in maintaining color consistency, pavers must be installed from several cubes at a time. Efflorescence, a whitish, powder-like deposit, may appear on concrete pavers. This is a natural occurrence in any concrete product and will usually wear off over time.
© 2007 by Pavestone Company. All Rights Reserved. , Improving Your Landscape™, Signature Stone™ Series, City Stone™ Series, Parkway™ Series and Roman Cobble™ are trademarks of the Pavestone Company.
Base
Atlanta, GA: Austin/San Antonio, TX: Boston, MA: Cartersville, GA Charlotte, NC: Cincinnati, OH: Colorado Springs, CO: Dallas/Ft. Worth, TX: Denver, CO: Hagerstown, MD:
Member of APWA and NCMA
(770) (512) (508) (770) (704) (513) (719) (817) (303) (240)
306-9691 558-7283 947-6001 607-3345 588-4747 474-3783 322-0101 481-5802 287-3700 420-3780
ICPI Charter Member
• • • • • •
Houston, TX: Kansas City, MO: Las Vegas, NV: New Orleans, LA: Phoenix, AZ: Sacramento/ Winters, CA: • St. Louis/ Cape Girardeau, MO:
(281) (816) (702) (985) (602)
391-7283 524-9900 221-2700 882-9111 257-4588
(530) 795-4400 (573) 332-8312
Retaining Wall Systems
SKU# CM 034v5 07/07
w w w. p a v e s t o n e . c o m
• • • • • • • • • •
Bedding Course