Concrete Pave Stones
Symetry
™
IMPROVING YOUR LANDSCAPE ™
Symetry
™
Enjoy unlimited design possibilities with the innovative shaped Symetry™ pave stone and its coordinating square. The assembly of shapes furnish endless elegant pattern configurations. This potpourri of patterns enables the designer to signature his project with a most unique, creative and formal appearance.
COMPOSITION AND MANUFACTURE Symetry™ is made from a “no slump” concrete mix. Made under extreme pressure and high frequency vibrations, Symetry™ has an average compressive strength greater than 8000 psi, a water absorption maximum of 5% and will meet or exceed ASTM C-936 and freeze-thaw testing per Section 8 of ASTM C-67.
INSTALLATION 1. Excavate unsuitable, unstable or unconsolidated subgrade material and compact the area which has been cleared. Backfill and level with dense graded aggregate suitable for base material (typically 4 in. to 8 in. (101mm to 202mm) of compacted base for pedestrian traffic) or as otherwise directed by Site Engineer/Architect/Landscape Architect. 2. Place bedding course of washed sand conforming to the grading requirements of ASTM C-33 to a uniform depth of 1-11/2 in. (25-38mm) screeded to the grade and profile required.
APPLICATIONS • Patios
• Entrance Areas
• Pool Decks
• Terraces
• Garden Pathways
• Courtyards
• Beach Promenades
• Pedestrian Malls
• Driveways
• Roof Gardens
• Plazas
• Medians
• Sidewalks
PRODUCT INFORMATION Symetry™ is available in 1 size and 2 thicknesses. 60mm= 2 3/8" and 80mm= 3 1/8" Symetry™ Nominal Dimensions: 11 1/8 L x 4 1/8 W* 60mm = 2 3/8" Wt./Stone: Stones/Sq.Ft: Stones/Pallet: Approx. Wt./Pallet: Sq.Ft./Pallet Product Code:
8.1 lbs. 3.4 280 2,268 lbs. 81 656
283mm x 105mm
80mm = 3 1/8" Wt./Stone: Stones/Sq.Ft: Stones/Pallet: Approx. Wt./Pallet: Sq.Ft./Pallet Product Code:
10.5 lbs. 3.4 224 2,340 lbs. 65 658
3. Install Symetry™ with joints approximately 1/2 in. (13mm). 4. Where required, cut pave stones with an approved cutting device to fit accurately, neatly and without damaged edges. 5. Tamp pave stones with a plate compactor, uniformly level, true to grade and free of movement. 6. Spread sand to 1/8 in. (3 mm) thickness over entire paving area. Sand joints may require joint sand stabilization. 7. Make one more pass with plate compactor to fill joints with sand. Complete installation and specification details are available by contacting your Pavestone Sales Representative. Note: Colors are shown as accurately as possible in brochures and samples, but due to the nature of the product, regional color preferences and variables in print reproduction, colors may not match exactly. For best results in maintaining color consistency, pave stones must be installed from several cubes at a time. Efflorescence, a whitish, powderlike deposit, may appear on concrete pave stones. This is a natural occurrence in any concrete product and will usually wear off over time.
Symetry™ Square is available in 1 size and 2 thicknesses. 60mm= 2 3/8" and 80mm= 3 1/8" Symetry™ Square Nominal Dimensions: 5 13/16 L x 5 13/16 W* 148mm x 148mm 60mm = 2 3/8" Wt./Stone: Stones/Sq. Ft. Stones/Pallet: Approx. Wt./Pallet: Sq.Ft./Pallet Product Code:
6.7 lbs. 4.166 400 2,688 lbs. 96 666
80mm = 3 1/8" Wt./Stone: Stones/Sq. Ft. Stones/Pallet: Approx. Wt./Pallet: Sq.Ft./Pallet Product Code:
8.7 lbs. 4.571 320 2,772 lbs. 77 668
*Fractional dimensions are nominal.
Typical Cross Section Of Concrete Pave Stone Installation Sand-Filled Joints Pave Stone Sand Base
SYMETRY™ INSTALLATION PATTERNS
Symetry ™ Diamond Run
Symetry ™ Venetian Parquet
Symetry ™ Rondolais
100% Symetry
83% Symetry, 17% Squares
100% Symetry
Symetry ™ Interpace
Symetry ™ Regency
Symetry ™ Grand Parquet
78.5% Symetry, 21.5% Squares
83% Symetry, 17% Squares
66.2 Symetry, 33.8% Squares
Symetry ™ Pattern 7
Symetry ™ Pattern R.S.
Symetry ™ Embassy Row
74.5% Symetry, 25.5% Squares
53% Symetry, 47% Squares
71% Symetry, 29% Squares
Symetry ™ Palace Parquet
Symetry ™ Georgian Parquet
83% Symetry, 17% Squares
78.5% Symetry, 21.5% Squares
© 2007 by Pavestone Company All Rights Reserved. , Improving Your Landscape™ are trademarks of the Pavestone Co. Symetry™ (U.S. Patent #4,544,305) is a trademark of Symrah Lic. Inc.
Member of ASLA and NCMA
Atlanta, GA: Austin/San Antonio, TX: Boston, MA: Charlotte, NC: Cartersville, GA Cincinnati, OH: Colorado Springs, CO: Dallas/Ft. Worth, TX: Denver, CO: Hagerstown, MD:
ICPI Charter Member
(770) (512) (508) (704) (770) (513) (719) (817) (303) (240)
306-9691 558-7283 947-6001 588-4747 607-3345 474-3783 322-0101 481-5802 287-3700 420-3780
• • • • • •
Houston, TX: Kansas City, MO: Las Vegas, NV: New Orleans, LA: Phoenix, AZ: Sacramento/ Winters, CA: • St. Louis/ Cape Girardeau, MO:
Retaining Wall Systems
(281) (816) (702) (985) (602)
391-7283 524-9900 221-2700 882-9111 257-4588
(530) 795-4400 (573) 332-8312
Symetry Paving Systems
SKU # CDC 008v5 07/07
w w w. p a v e s t o n e . c o m
• • • • • • • • • •