http://www.pavestone.com/web-media/cad/pavestone/pro/Paver_-_Cut_Sheets/Uni%20Anchorlock%20CM%20064v

Concrete Pave Stones

Uni-Anchorlock

®

CAN BE MECHANICALLY INSTALLED

IMPROVING YOUR LANDSCAPE ™

Uni-Anchorlock

®

The Uni-Anchorlock® with its unique "L:" shape and indented geometry, is unsurpassed in structural performance. Large paving projects using Uni-Anchorlock® can be mechanically installed for an efficient installation. Used on numerous international paving projects, this product provides superior load transfer and resistance to horizontal creep. Intended for mechanical placement, the Uni-Anchorlock® provides unmatched speed of installation making it one of the most cost effective paving products today.

APPLICATIONS

COMPOSITION AND MANUFACTURE Uni-Anchorlock® is made from a “no slump” concrete mix.

Made under extreme pressure and high frequency vibrations, Uni-Anchorlock® has a compressive strength greater than 8000psi, a water absorption maximum of 5% and will meet or exceed ASTM C-936.

Major Urban Street Paving • Crosswalks • Parking Lots Freight Terminal Streets • Low Speed Airport Taxiways Container Yards

PRODUCT INFORMATION Uni-Anchorlock® Nominal Dimensions 4 1/4" W x 8 3/4" L 109mm x 222mm Height/Thickness 3 1/8" = 80mm Wt./Stone 13 lbs.

Stones/Sq. Ft. 1.8 Stones/Pallet 208 Approx. Wt./Pallet 2,700 lbs.

Sq. Ft./Pallet 75 Product Number 178

INSTALLATION 1. Excavate unsuitable, unstable or unconsolidated subgrade material and compact the area which has been cleared. Backfill and level with base material as directed

by Site Engineer/Architect/Landscape Architect.

2. Place bedding course of washed sand conforming to the grading requirements of ASTM C-33 to a uniform depth of 1-11/2 in. (25-38mm) screeded to the grade and profile required.

3. Install Uni-Anchorlock® with joints approximately 1/8 in.

(3mm) in width.

4. Where required, cut pavers with an approved cutting device to fit accurately, neatly and without damaged edges.

5. Tamp pavers with a plate compactor, uniformly level, true to grade to grade and free of movement.

6. Spread sand to 1/8 in. thickness over entire paving area.

7. Make one more pass with plate compactor to fill joints with sand.

Note: Product not available in all markets. Fractional dimensions are nominal.

INSTALLATION PATTERNS

Complete installation & specification details are available by contacting your Pavestone Company Sales Representative.

Typical Cross Section Of Concrete Paver Installation Sand-Filled Joints Pavers

Note: Colors are shown as accurately as possible in brochures & samples, but due to the nature of the product, regional color differences and variables in print reproduction, colors may not match exactly. For best results in maintaining color consistency, pavers must be installed from several cubes at a time. Efflorescence, a whitish, powder-like deposit, may appear on concrete pavers. This is a natural occurrence in any concrete product and will usually wear off over time.

© 2007 by Pavestone Company. All Rights Reserved. , Improving Your Landscape™ are trademarks of the Pavestone Company. Uni-Anchorlock® (U.S. Patent #4,583,341) is a registered trademark of, and manufactured under license from, F. von Langsdorff Lic. Ltd., Mississauga, Ontario, Canada.

Base

Atlanta, GA: Austin/San Antonio, TX: Boston, MA: Cartersville, GA Charlotte, NC: Cincinnati, OH: Colorado Springs, CO: Dallas/Ft. Worth, TX: Denver, CO: Hagerstown, MD:

Member of ASLA and NCMA

(770) (512) (508) (770) (704) (513) (719) (817) (303) (240)

306-9691 558-7283 947-6001 607-3345 588-4747 474-3783 322-0101 481-5802 287-3700 420-3780

ICPI Charter Member

• • • • • •

Houston, TX: Kansas City, MO: Las Vegas, NV: New Orleans, LA: Phoenix, AZ: Sacramento/ Winters, CA: • St. Louis/ Cape Girardeau, MO:

(281) (816) (702) (985) (602)

391-7283 524-9900 221-2700 882-9111 257-4588

(530) 795-4400 (573) 332-8312

Retaining Wall Systems

SKU# CM 064v2 01/07

w w w. p a v e s t o n e . c o m

• • • • • • • • • •

Sand