Timber Pest Inspection Perth - Prompt Building Inspections

Welcome to Prompt Building Inspections WA. We specialise in residential building inspections in Perth, Western Australia. Whether you are purchasing an established home or building a new home, Prompt Building Inspections can cater for all your inspection needs. Our easy to read reports comply with AS4349.1 & AS4943.3 and will be available within 24 hours of the inspection.

Inspections Types

Pre-Purchase Inspections

Special Purpose Building Inspections Perth

Construction Inspections

Pre-Purchase Inspections

Structural Inspection A structural inspection is a visual Inspection of all of the structural elements that are accessible in the building including inside the roof cavity.

Comprehensive Inspection In addition to the items included above in the “Structural Inspection” and the “Prompt Safety Checks”, the “Comprehensive Inspection” will include an assessment of non-structural building elements

Significant cracks or leaning in walls.

Cracks and other defects in floors.

Movement, sagging or any structural defects in the roof structure.

The condition of flashings and gutters.

A detailed assessment of the condition of ceilings General testing of lights and ceiling fans.

Special Purpose Building Inspections

Special Purpose Building Inspections Perth The above inspections are designed for a Pre Purchase situation. We are, however, also often asked to assist clients with issues that are not necessarily on homes that are being purchased.

Assisting owner builders with advice as needed.

Dispute resolution with trades during renovations or home improvements.

Assessing concerns clients may have over quality on new homes under construction and enovations being done by a builder.

Construction Inspections

Plate Height Building Inspection Perth late height refers to the completion of brickwork at any given floor. The plate is the timber roofing element that is fixed down to the top of the completed wall.

Roof Frame Building Inspection Perth On a single-storey home in WA we will often carry out an inspection of the roof frame at the same time as the Plate Height Building Inspection.

Installation of cavity flashings in required areas.

Straightness, true and plumb of window and door frames.

Installation of structural columns as per engineer’s details.

Builders do not allow inspectors to enter the roof cavity This inspection includes a detailed assessment of all roof framing elements

VISIT US AT

21 Frawley Gardens, Murdoch 6150 Perth, WA 0420 846 356 WWW.PBIWA.COM.AU