Nobilia accessories 2013

Sales Manual Accessories 2013 Net list, valid as of October 1, 2012

Cutlery trays Organisers for pull-outs Anti-slip mats Plinth foots for open plinth solutions Plinth drawers Built-in radio Step plinth Sensomatic opening system Towel rails Electric multi slicer Internal pull-outs

1 Base unit accessories

1

Base unit accessories

Base unit accessories

1

Base unit accessories

Order No.

Points

Width in cm

Pull-Out mechanisms

Abbreviation

30 40 45 50 55 60 80 90 100

26121 26122 26123 26124 26125 26126 26128 26129 26130

10 10 10 12 12 12 15 15 16

45-46 50-46 60-46 80-46 90-46 100-46

26104 26105 26106 26108 26109 26110

10 12 12 15 15 16

30 40 45 50 55 60 80 90 100

S S S S S S S S S

27321 27322 27323 27324 27325 27326 27328 27329 27330

19 22 22 22 23 25 34 34 34

80 90 100

S S S

27338 27339 27340

77 79 80

80 90 100

S S S

27348 27349 27350

70 72 72

30 40 45 50 55 60 80 90 100

V V V V V V V V V

26510 26512 26513 26514 26515 26516 26518 26519 26520

19 20 22 22 25 26 41 41 47

45-46 V 50-46 V 60-46 V

26504 26505 26506

23 25 25

26538 26539 26540

76 77 79

Cutlery trays and organisers for pull-outs Cutlery tray Trend grey, height: 43 mm fits drawer depth of 500 mm, side depth 560 mm

BE

BE

BE

BE

BE

BE

BE

BE

BE

BE

BE

BE

BE

BE

BE

Cutlery tray SCOOP silver-grey, variable division, height: 63 mm fits drawer depth of 500 mm, side depth 560 mm

BE

BE

BE

BE

Where internal drawers are planned behind hinged doors, order a cutlery tray that is 50 mm shorter than the unit width!

BE

BE

BE

BE

BE

Cutlery tray SCOOP with knife block silver-grey, solid wood knife block, variable division, height: 63 mm fits drawer depth of 500 mm, side depth 560 mm

BE-M

BE-M

BE-M

Cutlery tray SCOOP with insert for spice jars silver-grey, solid wood perforated board, variable division, height: 63 mm fits drawer depth of 500 mm, side depth 560 mm

BE-G

BE-G

BE-G

Cutlery tray, variable silver-grey, variable division, height: 63 mm fits drawer depth of 500 mm, side depth 560 mm

BE

BE

BE

BE

Where internal drawers are planned behind hinged doors, order a cutlery tray that is 50 mm shorter than the unit width!

BE

BE

BE

BE

BE

BE

BE

BE

BE-M

BE-M

BE-M

Where internal drawers are planned behind hinged doors, order a cutlery tray that is 50 mm shorter than the unit width!

as above, however for drawer depth 400 mm, side depth 460 mm

Do not use drawers of 141 mm height in conjunction with intermediate shelf KKB* or spacer shelf DBKI*.

as above, however for drawer depth 400 mm, side depth 460 mm

Cutlery tray, variable with knife block silver grey, solid beech wood knife block, variable division, height: 63 mm fits drawer depth 500 mm, side depth 560 mm

ZUB - EN

= Article cannot be compensated

80 90 100

Z 1.1

Base unit accessories

Order No.

Points

Width in cm

Pull-Out mechanisms

Abbreviation

BE-G

80 90 100

26548 26549 26550

73 74 76

GD12

9487

25

BE

BE

BE

BE

BE

BE

BE

BE

BE

30 40 45 50 55 60 80 90 100

H H H H H H H H H

36011 36012 36013 36024 36025 36026 36028 36029 36030

25 34 35 38 38 39 54 60 67

Beech wood cutlery tray with knife block solid beech wood, height: 56 mm fits drawer depth 500 mm, side depth 560 mm

BE-M

BE-M

BE-M

BE-M

60 80 90 100

H H H H

36036 36038 36039 36040

63 76 83 92

Beech wood cutlery tray with insert for spice jars solid beech wood, height: 56 mm fits drawer depth 500 mm, side depth 560 mm

BE-G

BE-G

BE-G

BE-G

60 80 90 100

H H H H

36046 36048 36049 36050

61 76 82 91

Spices 12 jars, a selection of the most common spices.

GD12

9487

25

Beech wood cutlery tray with insert for foil dispenser solid beech wood, height: 56 mm fits drawer depth 500 mm, side depth 560 mm

BE-F

BE-F

BE-F

BE-F

60 80 90 100

H H H H

36056 36058 36059 36060

117 130 139 145

Heartwood ash wooden cutlery tray Heartwood ash solid wood, height: 56 mm fits drawer depth 500 mm, side depth 560 mm

BE

BE

BE

BE

BE

BE

BE

BE

BE

30 40 45 50 55 60 80 90 100

K K K K K K K K K

37321 37322 37323 37324 37325 37326 37328 37329 37330

44 53 58 64 74 74 96 107 117

BE-M

BE-M

BE-M

BE-M

60 80 90 100

K K K K

37336 37338 37339 37340

108 127 139 150

Cutlery tray, variable with insert for spice jars silver grey, solid beech wood perforated board, variable division, height: 63 mm fits drawer depth 500 mm, side depth 560 mm

BE-G

BE-G

Spices 12 jars, a selection of the most common spices.

Beech wood cutlery tray solid beech wood, height: 56 mm fits drawer depth 500 mm, side depth 560 mm

Do not use drawers of 141 mm height in conjunction with intermediate shelf KKB* or spacer shelf DBKI*.

Where internal drawers are planned behind hinged doors, order a cutlery tray that is 50 mm shorter than the unit width!

Do not use drawers of 141 mm height in conjunction with intermediate shelf KKB* or spacer shelf DBKI*.

Where internal drawers are planned behind hinged doors, order a cutlery tray that is 50 mm shorter than the unit width!

Heartwood ash wooden cutlery tray with knife block Heartwood ash solid wood, height: 56 mm fits drawer depth 500 mm, side depth 560 mm

Z 1.2

= Article cannot be compensated

ZUB - EN

Base unit accessories

Order No.

Points

Width in cm

Pull-Out mechanisms

Abbreviation

BE-G

60 80 90 100

K K K K

37346 37348 37349 37350

104 124 134 146

GD12

9487

25

Heartwood ash wooden cutlery tray with insert for foil dispenser Heartwood ash solid wood, height: 56 mm fits drawer depth 500 mm, side depth 560 mm

BE-F

BE-F

BE-F

BE-F

60 80 90 100

K K K K

37356 37358 37359 37360

171 191 201 213

Universal organiser, beech with solid wood pegs for individualised divisions fits pull-out depth 500 mm, incl. 8 solid wood pegs in beech for 600 mm width, incl. 16 solid wood pegs in beech for 800/900/1000 mm width

AO

AO

AO

AO

60 80 90 100

H H H H

36066 36068 36069 36070

74 112 123 133

Solid wood pegs in beech for universal organiser, in addition set of 8 bars each, Height: 160 mm, 25 mm diameter

AO-STAB

3919

22

Beech wood universal organiser with solid wood pegs for individualised divisions fits pull-out depth 500 mm, incl. 7 solid wood pegs in beech for 600 mm width, incl. 10 solid wood pegs in beech for 800/900/1000 mm width

3 x 116 + 4 x 180 mm

AOS

2 x 116 + 6 x 180 + 2 x 148 mm

AOS

60 80 90 100

H H H H

36076 36078 36079 36080

105 139 159 174

60 80 90 100

K K K K

37366 37368 37369 37370

114 153 166 175

29480

35

60 80 90 100

K K K K

37376 37378 37379 37380

128 153 172 185

60 80 90 100

26526 26528 26529 26530

77 89 91 118

Heartwood ash wooden cutlery tray with insert for spice jars Heartwood ash solid wood, height: 56 mm fits drawer depth 500 mm, side depth 560 mm

BE-G

BE-G

BE-G

Spices 12 jars, a selection of the most common spices.

Do not use drawers of 141 mm height in conjunction with intermediate shelf KKB* or spacer shelf DBKI*.

ZUB - EN

2 x 116 + 8 x 180 mm

AOS

10 x 180 mm

AOS

Heartwood ash wooden universal organiser with solid wood pegs for individualised divisions fits pull-out depth 500 mm, incl. 8 solid wood pegs in heartwood ash for 600 mm width, incl. 16 solid wood pegs in heartwood ash for 800/900/1000 mm width

AO

AO

AO

AO

Heartwood ash solid wood pegs for universal organiser, in addition set of 8 pegs each, height: 160 mm, 25 mm diameter

AO-STABK

Heartwood ash wooden universal organiser with solid wood pegs for individualised divisions fits pull-out depth 500 mm, incl. 7 solid wood pegs in Heartwood ash for 600 mm width, incl. 10 solid wood pegs in Heartwood ash for 800/900/1000 mm widths

3 x 116 + 4 x 180 mm

AOS

2 x 116 + 6 x 180 + 2 x 148 mm

AOS

Universal organiser in silver grey variable divisions, incl. utensil tray, for fastening to the pull-out back panel, for arranging the pull-outs for pull-out depth of 500 mm, side depth of 560 mm

= Article cannot be compensated

2 x 116 + 8 x 180 mm

AOS

10 x 180 mm

AOS

AOV

AOV

AOV

AOV

Z 1.3

Base unit accessories

Order No.

Points

Width in cm

Pull-Out mechanisms

Abbreviation

30 40 45 50 60 80 90 100

26711 26712 26714 26715 26716 26718 26719 26720

8,3 9,1 9,6 10,1 10,7 12,6 13,3 14

40 45 50 60

26722 26724 26725 26726

8,8 9,1 9,6 10,5

45-46 50-46 60-46 80-46 90-46 100-46

26704 26705 26706 26708 26709 26710

9,6 10,1 10,7 12,6 13,3 14

80 90

29240 29241

28 34

80 90

29242 29243

25 32

80 90 120

29244 29245 29246

19 23 26

90 90 100 100 120 120

R L R L R L

29250 29251 29252 29253 29254 29255

22 22 26 26 26 26

20 30

29256 29257

10 13

R 29258 L 29259

13 13

Anti-slip mat for base units Anti-slip mat, anthracite fits drawers with pull-out depth of 500 mm with 560 mm side depth Other drawer dimensions can be cut

RM

RM

RM

RM

RM

RM

RM

RM

Same as above, however matching all internal drawers and pull-outs for types with door hinge and side depth of

560 mm.

RMI

RMI

RMI

RM

RM

RM

RM

RM

RM

Anti-slip mat, anthracite fits drawers with pull-out depth of 400 mm with 460 mm side depth Other drawer dimensions can be cut

RMI

Anti-slip mat, anthracite for corner base units as carousel units

2 pieces matching for ref. UEK* (25092/25093), UEDK* (21092/21093) and UEDK*M (41092/41093)

RM-UEK

Anti-slip mat, anthracite for chamfered corner base units as carousel units and diagonal tambour front corner base units 2 pieces matching for ref. UEDT* (35072/35080), UEDT*M (41072/41080) and UET* (25072/25080)

RM-UETJ

Anti-slip mat, anthracite for corner base units 2 pieces matching for ref.

UEDBD* (21095/21086/21094/21088), UEBD* (25095/25086/25094/25088), UEDBD*-M (43095/43086/43094/43088)

RM-UE

RM-UE

RM-UE

Anti-slip mats, anthracite for corner units and corner highboards with swivel pull-out 2 pieces matching for ref.

UEDSA* (21190/21191/21192), UEDSA*M (42190/42191/42192), UESA* (22190/22191/22192) and HESA* (35479/35480/35482)

RM-UESA

RM-UESA

RM-UESA

RM-UESA

RM-UESA

RM-UESA

Anti-slip mat, anthracite for pull-out unit 2 pieces matching for ref. UAMD* (21020/21139) and UAM* (22020/22139)

RM-UA

RM-UA

Anti-slip mat, anthracite for pull-out units, chamfered 2 pieces matching for ref. UZAD* (21753), UZA* (22753) and HZA* (47509/47007/37007/57007)

RM-UZ

RM-UZ

RM-UEK

RM-UETJ

RM-UE120 suitable for 1000 mm and 1200 mm width!

Z 1.4

= Article cannot be compensated

ZUB - EN

Base unit accessories

Order No.

Points

Width in cm

Pull-Out mechanisms

Abbreviation

SSF

15

4220

28

SSF

20

4221

34

SSF

29

4222

32

SSFE

15

4233

23

SSFE

20

4234

25

SSFE

29

4235

28

Plinth solutions Round plinth foot made of aluminium in stainless steel appearance, diameter 45 mm, height adjustment + 15 mm, observe max. feet spacing of 700 mm.

Plinth heights of 150, 200 and 294 mm can be achieved in connection with an upright shelf, 25 mm thick.

Not possible with oven housing HU 315, HUG 317, base units with large-capacity pull-outs, carousel corner units with rotary shelves and dishwashers!

Price per piece.

Foot height: 122 mm Plinth height obtained: 150 mm Foot height: 172 mm Plinth height obtained: 200 mm Foot height: 266 mm Plinth height obtained: 294 mm (When planned with mini units a 910 mm working height is obtained with the upright panel).

Unless ordered differently, per unit 2 plinth feet will be invoiced, from 900 mm unit width each 3 plinth feet.

For each end of run planned, 2 plinth feet are added.

Square adjustable plinth foot made of aluminium in stainless steel appearance, 50 x 50 mm, height adjustment + 15 mm, observe max. feet spacing of 700 mm.

Plinth heights of 150, 200 and 294 mm can be achieved in connection with an upright shelf, 25 mm thick.

Not possible with oven housing HU 315, HUG 317, base units with large-capacity pull-outs, carousel corner units with rotary shelves and dishwashers!

Price per piece.

Foot height: 122 mm Plinth height obtained: 150 mm Foot height: 172 mm Plinth height obtained: 200 mm Foot height: 266 mm Plinth height obtained: 294 mm (When planned with mini units, a 910 mm working height is obtained with the upright panel).

Unless ordered differently, per unit 2 plinth feet will be invoiced, from 900 mm unit width each 3 plinth feet.

For each end of run planned, 2 plinth feet are added.

ZUB - EN

= Article cannot be compensated

Z 1.5

Base unit accessories

Foot height: 266 mm Plinth height obtained: 294 mm

Points

Foot height: 172 mm Plinth height obtained: 200 mm

Order No.

Square plinth foot, two-section with anti-tip feature for mounting freestanding kitchen runs or islands in conjunction with an upright shelf, 25 mm thick, made of aluminium in stainless steel appearance, 50 x 50 mm, height adjustment + 15 mm, Not possible with oven housing HU 315, HUG 317, base units with large-capacity pull-outs, carousel corner units with rotary shelves and dishwashers!

Price per piece.

Foot height: 122 mm Plinth height obtained: 150 mm

Width in cm

Pull-Out mechanisms

Abbreviation

SF-KSW

15

3466

55

SF-KSW

20

3467

55

SF-KSW

29

3468

58

7 10 15 20

3460 3461 3462 3463

54 54 55 57

15 15

3470 3471

19 19

20 20

3472 3473

20 19

29 29

3474 3475

20 19

As above, however, suitable for design plans using plinth panels.

for 70 mm plinth height

SF-KS

One plinth foot is neccessary per every started running metre.

Mount the plinth feet centred beneath the island or unit!

for 100 mm plinth height

SF-KS

for 150 mm plinth height

SF-KS

for 200 mm plinth height

SF-KS

Square plinth foot steel with Chromium Gloss finish, 26.5 x 26.5 mm Height adjustment + 15 mm, Observe maximum foot spacing of 700 mm.

Plinth heights of 150, 200 and 294 mm can be achieved in connection with a support panel, 25 mm thick.

Not possible with oven housing HU 315, HUG 317, base units with large-capacity pull-outs, carousel corner units with rotary shelves and dishwashers!

Price per piece.

Feet height: 122 mm Plinth height reached: 150 mm Foot height: 172 mm Plinth height obtained: 200 mm Foot height: 266 mm Plinth height obtained: 294 mm (When planned with mini units, a 910 mm working height is obtained with the upright panel).

corner plinth

SFCE

centre plinth

SFCM

corner plinth

SFCE

centre plinth

SFCM

corner plinth

SFCE

centre plinth

SFCM

The factory will invoice 2 corner plinth feet SFCE for the beginning of run and 2 centre plinth feet SFCM per unit for all further units. Upwards of 900 mm unit width the factory will invoice 3 centre plinth feet SFCM. Two additional corner plinth feet SFCE are to be added (and invoiced) at each planned end of run.

Z 1.6

= Article cannot be compensated

ZUB - EN

Base unit accessories

Order No.

Points

Plinth drawer drawer depth of 400 mm, for mounting beneath base units and tall units on site, no special units, such as e.g. all corner units, plinth panel with bar handle, stainless steel coloured.

Plinth drawer can only be installed with a plinth height of 150 mm and 200 mm and a side depth of 560 mm.

Do not plan beneath appliance housing units, since appliance ventilation is provided through the plinth panel.

Planning in freestanding runs requires continuous back panel cladding, rear plinth panel cannot be mounted.

Width in cm

Pull-Out mechanisms

Abbreviation

SSKN

40 45 50 60 80 90 100

3424 3427 3425 3426 3428 3429 3421

96 98 98 101 111 112 117

EBR

5400

291

TSA

3456

110

RKZ

9229

9

SSKN

SSKN

SSKN

SSKN

SSKN

SSKN

Plan 2 plinth drawers for 2-door base units.

SSKN40 is not suitable for use with 400 mm wide larder units HA40*!

Cannot be combined with Cargo HC* and HDC*.

If planned at end of run, an upright panel is necessary!

Mono built-in radio for mounting in plinth panels comprised of: built-in radio 2 loudspeakers, chrome-plated 1 infrared remote control 1 infrared receiver with 3000 mm connection cable 2 x 3000 mm loudspeaker cables 1000 mm antenna cable 1450 mm power supply cable Dimensions: 103 mm diameter, built-in depth: 41 mm, drill diameter: 86 mm Do not plan with plinth heights of 70 and 100 mm.

Step pedestal Fold-out step ladder of steel tubing, installation at the side, 2 steps 200 x 330 mm, with anti-slip nep structure, safety lock, easily folding mechanism, including universal holder to fit in base or tall units, step height: 190 mm / 380 mm, fold-in dimension: W x H x D = 413 x 77 x 448 mm Cannot be mounted in plinth area!

135째 plastic profile, grey to join carcase panelling 1100 mm high, required for 135째 corner joints of carcase sides without mitre cut (e.g. for back panelling made of carcase material)

ZUB - EN

= Article cannot be compensated

Z 1.7

Base unit accessories

Order No.

Points

Width in cm

Pull-Out mechanisms

Abbreviation

-F -F

5238 5241

314 505

-E 51238 -E 51241

314 505

-G 52238 -G 52241

339 531

-J 53238 -J 53241

336 527

-K 54238 -K 54241

339 531

-L 55238 -L 55241

349 540

SOS2-SET

-B 56238 -B 56241

349 540

HT-CR

4394

48

EAS

4448

472

SLGSP

9448

23

Accessories for base units up to 600 mm width

SOS-SET

from 800 mm width

SOS2-SET

ref. E for France, Belgium, Poland, Slovakia, the Czech Republic and Morocco

SOS-SET

SOS2-SET

Type G for Great Britain, Ireland, Singapore, Hong Kong

SOS-SET

SOS2-SET

Type J for Switzerland

SOS-SET

SOS2-SET

Type K for Denmark

SOS-SET

SOS2-SET

Type L for Italy

SOS-SET

SOS2-SET

Type B for Taiwan

SOS-SET

One opening system is required per drawer or pull-out.

Towel rail, matt chromium-plated 3-part telescopic towel rail, all metal on ballbearings rails, suitable for visible fitting to open shelf units or to side panels.

40 mm high, 490 mm depth, 890 mm when extended, width 145 mm.

Electric multi slicer

Ritter AES 62 SR, silver metallic, for drawers from 500mm width, goods are sliced from right hand side, holding angle for finger guard and end piece holder, thickness infinetely adjustable up to approx. 14 mm, with child lock and stainless steel tray for sliced goods

Premium

Sensomatic opening system for drawers and pull-outs for electro-mechanical opening of drawers and front pull-outs, comprised of: drive unit, connection cable, power supply unit, power cable, spring-loaded bumper for front, mounting screws and assembly instructions Type F for Germany, Austria, Netherlands, Portugal, Spain, Sweden, Norway, Finland, Slovenia, Croatia, Greece, Turkey, Hungary, Russia

Also possible with a side depth of 460 mm.

Protection strip for worktop above dishwasher to prevent damage to worktop by condensation.

Silver anodized, self-adhesive.

Dimensions: W x D = 700 x 80 mm.

Z 1.8

= Article cannot be compensated

ZUB - EN

Base unit accessories

Width in cm UIS UIS

UIS

UIS

UIS

UIS

UIS UIS

Latch for simultaneous opening of internal drawers suitable for pull-out units with internal drawers

MITIS

Internal pull-out drawer depth of 500 mm, matches units with front pull-out, for tall or base units.

Subsequent mounting requires that pull-out runners be ordered, refer to Accessories list, Chapter 8.

UIA

as above, however, matching elements with door hinge. incl. 2 x 25 mm compensation strip Not to be planned for units with front pull-out.

= Article cannot be compensated

Premium

UIS

UIA UIA UIA

UIA

UIA

Premium

UIA UIA UIA

Points

UIS

Not to be planned for units with front pull-out.

Where internal drawers are planned behind hinged doors, order a cutlery tray that is 50 mm shorter than the unit width!

ZUB - EN

Order No.

as above, however, matching elements with door hinge. incl. 2 x 25 mm compensation strip

Premium

Internal drawer drawer depth of 500 mm, matches units with front pull-out, for tall or base units.

Subsequent mounting requires that pull-out runners be ordered, refer to Accessories list, Chapter 8.

Premium Pull-Out mechanisms

Abbreviation

30 50 60 80 90 100

-A -A -A -A -A -A

26732 26735 26736 26738 26739 26740

70 72 73 83 85 88

40 45 50 60

-T -T -T -T

26743 26744 26745 26746

69 69 70 72

26730

18

30 40 45 50 60

-A -A -A -A -A

26751 26752 26754 26755 26756

79 82 83 85 88

40 45 50 60

-T -T -T -T

26763 26764 26765 26766

79 80 82 83

Z 1.9

2

Sink unit accessories Waste collectors

Sink unit accessories Waste collectors

2

Moisture protection sheets Hose and cable lead-through Cleaning products pull-outs Waste collectors

Sink unit accessories Waste collectors

2

Order No.

Points

Abbreviation

Accessories for sink units / Waste collectors

Moisture protection sheet Aluminum tray, serrated, for sink base units and corner sink base units SPUE(D)90-45 / 100-50 / 120-60, cannot be used with front pull-outs, suitable only for a side depth of 560 mm

FB40 FB45 FB50 FB60 FB80 FB90 FB100 FB120

4212 4213 4214 4215 4216 4217 4218 4219

23 23 23 23 25 26 28 29

Moisture protection sheet aluminium sheet, serrated, for chamfered corner sink unit SPUE(D)90/105

FBE90 FBE105

7035 7036

57 61

Hose and cable lead-through white plastic, 2 piece, 165 x 165 mm, for sink base units. Neatly covers the cut-outs, including 35 x 15 mm fastening screws and template

SKD

7037

9

Hose deflector for pull-out mixer batteries to be fitted with two screws, creates a spacing between handspray hose and waste separation and organiser system

SA-MB

7020

18

Cleaning products pull-out 2 compartments, metal colour powder coating, dimensions: H x W x D = 420 x 117 x 470 mm, installation on site to the side panel (door hinged side)

AS4331

4331

72

Cleaning products pull-out „Vario Line“ aluminium, back panel coated silver grey 3 trays and hooks, For mounting to the side panel on site, H x W x D = 496 x 158 x 495 mm

PMA

4416

153

Accessories for sink units

Can only be factory-fitted into the corner unit.

ZUB - EN

= Article cannot be compensated

Z 2.1

Order No.

Points

Abbreviation

Accessories for sink units / Waste collectors

AS9481

9481

55

AS4311

4311

85

AS4753

4753

101

AS4742

4742

99

AS9420

9420

85

AS4752

4752

98

Waste collecting systems (fitted on bottom shelf behind hinged door) Built-in waste collector „Solo“ grey plastic, with mechanical pull-out and lid lifting system, 20 l volume, dimensions: H x W x D = 410 x 242 x 420 mm To be fitted on site onto the bottom shelf.

Can be built-in upwards of 300 mm door width.

Take sink syphon into account and plan space saving connector 021!

Built-in waste collector „Tandem“ as a full pull-out with 2 bins for ecological waste separation, with mechanical pull-out and lid lifting system, dimensions: H x W x D = 415 x 250 x 480 mm. Volume: 2 x 15 l. Eco-filter can be used.

Mounting on the bottom shelf.

Min. door width: 300 mm!

Take sink syphon into account and plan space saving connector 021!

Built-in waste collector Bio-Trio 30 DT with 3 plastic bins for odourless, ecological waste recycling 3 x 10 l volume, incl. bio lid, H x W x D: 385 x 254 x 475 mm To be fitted on site onto the bottom shelf.

Can be built-in upwards of 300 mm door width.

Take sink syphon into account and plan space saving connector 021!

Built-in waste collector „space saving Tandem“ sorting in 3 bins: one 18 l bin, two 8.5 l bins, 1 additional bio lid, H x W x D: 320 x 336 x 471 mm.

To be fitted on site onto the bottom shelf.

Can be built-in upwards of 400 mm door width.

Built-in waste collector „space saving Tandem S“ sorting in 2 bins: 1 x 12 l, 1 x 18 I, H x W x D = 341 x 434 x 352 mm.

Can be built-in upwards of 500 mm door width.

Waste collector 40 DT 2 bins for ecological waste separation 2 x 16 l volume, dimension: H x W x D = 320 x 338 x 475 mm.

To be fitted on site onto the bottom shelf.

Can be built-in upwards of 400 mm door width.

Take sink syphon into account and plan space saving connector 021!

Z 2.2

= Article cannot be compensated

ZUB - EN

Order No.

Points

Abbreviation

Accessories for sink units / Waste collectors

AS4378

4378

194

AS9402

9402

197

AS9471

9471

199

AS9472

9472

203

AS9473

9473

206

AS3445

3445

228

AS3446

3446

225

AS3447

3447

223

Waste collecting systems (fitted on shelf behind hinged door, diagonal) Built-in waste collector „Rondo“, revolving 3 plastic bins as full pull-out, 1 x 18 l, 2 x 8.5 l volume 12 l multi-functional bin with hole in the lid, 2 with divisions, additional bio lid for a 8.5 l bin To be fitted on site onto the bottom shelf.

Dimensions: H x W x D = 330 x 346 x 700 mm Can be fitted into chamfered base units from 900 mm width on!

Take sink syphon into account and plan space saving connector 021!

Waste collecting systems (pull-outs, fitted to the front) Built-in waste collector „Euro-Cargo Soft“ with noise reduced automatic closing. sturdy metal system cover, H x D: 387 x 403 mm light grey plastic components.

Contents: 1 x 14 litres, 1 x 20 litres Matching sink unit: SPUA(D) 40! as above, however, with the following contents: 3 x 10 litre, 1 additional bio lid, 1 utensil shelf Matching sink unit: SPUA(D) 45! as above, however, with the following contents: 1 x 15 litres, 2 x 10 litres Matching sink unit: SPUA(D) 50! as above, however, with the following contents: 1 x 24 litres, 3 x 10 litres, without utensil shelf Matching sink unit: SPUA(D) 60!

Take sink syphon into account and plan space-saving connector 021!

Built-in waste collector „Euro-Cargo S“ with noise reduced automatic closing, 2 bins.

Sturdy metal system cover, light grey plastic components.

Contents: 2 x 19 litres H x D: 427 x 403 mm Matching sink unit: SPUA(D) 45! as above, however, with the following contents: 1 x 19 litres, 1 x 30 litres Matching sink unit: SPUA(D) 50! as above, however, with the following contents: 2 x 30 litres Matching sink unit: SPUA(D) 60!

Take sink syphon into account and plan space saving connector 021!

ZUB - EN

= Article cannot be compensated

Z 2.3

Order No.

Points

Abbreviation

Accessories for sink units / Waste collectors

AS9441

9441

32

AS9449

9449

55

AS9440

9440

102

ASZ9465

9465

13

Waste collecting systems (fitted to hinged door) Built-in waste collector, silver-coloured made of metal with removable plastic waste bins, lid and rims are black plastic, right-hand side or left-hand side mounting, no load on door hinges, 13 l capacity.

Lid automatically lifts upon opening door. Dimensions H x W x D = 470 x 340 x 285 mm Attention: Only mount waste collector on side wall with door hinge or on centre stile with corner sink units.

Can be built-in upwards of 400 mm door width.

Built-in waste collector flat design, 19 l volume container. Installation dimensions: H x W x D = 470 x 410 x 210 mm.

Please note! Waste container only to be fitted to the side wall with door fittings, or to the centre post of corner sink units.

In the case of corner sink units, the adapater, order No. 9465 (to be fitted to the centre post) is required.

Can be built-in upwards of 450 mm door width.

Econtainer Junior, double waste collector flat design, with two 10 l and 19 l bins.

Dimensions: H x W x D = 470 x 460 x 400 mm.

Please note! Waste connector can only to fitted to the side panel with door fittings, or to the centre post of corner sink units, In case of corner sink units the adapter, order No. 9465 (to be fitted to the centre post) is required.

Can be built-in upwards of 500 mm door width.

Front bin fits underneath the sink connections, order space saving adapter 021.

Adapter for corner sink base units with centre post, galvanised suitable for all Econtainers and 9449 / 9440 waste collectors.

Please note! Observe door widths to be sufficient to allow the installation of waste collectors.

Screw the adapter to the centre post, then fasten the waste collector holder.

Z 2.4

= Article cannot be compensated

ZUB - EN

3

Worktop accessories

Worktop accessories

3

Upstands Support consoles Support legs Bar frame Table frame Base for bench seat Spatter shield Child safety guard Ventilation grill Sealing tape Electrical sockets Niche railing system

Worktop accessories

3

Upstands

Order No.

Points

Width in cm

Abbreviation

Length 2000 mm

WAP

200

4082

15

Length 4000 mm

WAP

400

4084

20

Special length 5000 mm

WAP

500

4085

41

Upstands Plastic upstand bottom part with sealing lips, plastic top.

Dimensions: 25 mm high, 25 mm deep, Delivered as strand material.

Available in all worktop designs, see chapter 2!

Also available in: No. 014 Stainless steel appearance WAP accessory bag, Set 1 matching the WAP plastic upstand consisting of: 4 x inner corner 90° 2 x inner corner 135° 2 x outer corner 90° 2 x sets of end caps

WAP-Z

7928

12

WAP accessory bag, Set 2 matching WAP plastic upstand consisting of: 2 x inner corner 90° 2 x sets of end caps

WAP-ZK

7926

9

Heat shield for WAP brushed stainless steel, 700 mm long, 32 mm high, to be glued on to the upstand WAP.

WAP-HS

4459

13

Note: Please use for gas hobs!

Upstands for continuous planning with niche cladding Colour No. 014: stainless steel appearance 2 sectional plastic profile with sealing lip, incl. vertical sealing profile Dimensions: 25 mm high, 25 mm deep, Delivered as strand material.

Length 2000 mm

WAPN

200

3942

20

Length 4000 mm

WAPN

400

3944

32

Special length 5000 mm

WAPN

500

3945

64

Bottom profile adds 4 mm to the worktop.

WAPN accessory bag, Set 1 matches the plastic upstands WAPN consisting of: 4 x interior corner 90° / 2 x interior corner 135° 2 x exterior corner 90° 2 x set of end caps for WAPN 1 x set of end caps for niche cladding

WAPN-Z

3940

13

WAPN accessory bag, Set 2 matches the plastic upstands WAPN consisting of: 2 x interior corner 90° 2 x set of end caps for WAPN

WAPN-ZK

3960

10

Heat shield for WAPN brushed stainless steel, 700 mm long, 32 mm high, to be glued on to the upstand WAPN.

WAPN-HS

3972

19

Note: Please use for gas hobs!

Silver coloured plastic top profile for niche cladding incl.1 set of end caps (left-hand side/right-hand side)

Plastic upstand 1 set of plastic end caps matching silver coloured platic top profile for niche cladding NVP.

ZUB - EN

= Article cannot be compensated

Length 2000 mm

NVP

200

3946

16

Length 4000 mm

NVP

400

3947

22

Special length 5000 mm

NVP

500

3948

44

3949

9

NVP-EK

Z 3.1

Worktop accessories

Order No.

Points

Width in cm

Abbreviation

STK-R

4511

53

STK-E

4515

34

STK-NI

4035

77

STK-ES

4516

45

STK-S 45

4024

82

GTH

120

4025

318

GTH

160

4026

391

GTH

200

4027

437

GTH

240

4028

504

GTHE

120

4078

318

GTHE

160

4079

391

Support consoles not included in scope of delivery!

Not suitable for mounting on Slim Line worktops.

GTHE

200

4080

438

GTHE

240

4081

496

Support angle aluminium, 250 mm wide, for fitting worktops to wall, or to fasten breakfast bars to base units or back panels. 40 x 40 mm legs, including fixing screws

STW

4032

12

Support consoles - support legs Round support console, straight aluminium in stainless steel appearance, for installation of breakfast bars on the worktop, 195 mm high, 45 mm Ø Not suitable for mounting on Slim Line worktops.

Right-angled support console, straight aluminium in stainless steel appearance, for installation of breakfast bars on the worktop, 195 mm high, W x D = 50 x 50 mm Not suitable for mounting on Slim Line worktops.

Support bracket BKS, slanted aluminium in stainless steel appearance, 45 mm Ø, 205 mm high, with base plate. Plan in a distance of approx.

600 to 800 mm.

Used to secure breakfast bars made of worktops or glass on the worktop Glass counters have affixed adhesive connectors, order respective quantity of support consoles!

Not suitable for mounting on Slim Line worktops.

Right-angled support console, slanted aluminium in stainless steel appearance, used do secure breakfast bars made of worktops or glass on the worktop, 230 mm high, W x D = 50 x 50 mm Glass counters have affixed adhesive connectors, order respective quantity of support consoles!

Not suitable for mounting on Slim Line worktops.

Round support console, slanted aluminium in stainless steel appearance for side installation, 180 mm high, 45 mm Ø Inclination: 45° Not suitable for mounting on Slim Line worktops or Slim Line upright panels.

Glass counter top, 10 mm ESG (mat glass) for support bracket STK-NI 400 mm deep, incl. adhesive connectors, 1200 mm width with 2 adhesive connectors 1600 mm width with 3 adhesive connectors 2000 mm width with 3 adhesive connectors 2400 mm width with 4 adhesive connectors as above, however with adhesive connectors for support bracket STK-ES

Not suitable for mounting with Slim Line worktops.

Z 3.2

= Article cannot be compensated

ZUB - EN

Worktop accessories

Support leg 60 mm Ă˜ in stainless steel appearance + 30 mm height adjustable

Points

Order No.

Width in cm

Abbreviation

710 mm high

SFED

71 4087

29

820 mm high

SFED

82 4088

32

870 mm high

SFED

87 4089

34

710 mm high

SF-R

71 4513

42

1105 mm high

SF-R

110 4514

50

Support leg square aluminium in stainless steel appearance, height adjustment: + 15 mm W X D = 50 x 50 mm

720 mm high

SF-EA

50

-72 45400

51

790 mm high

SF-EA

50

-79 45401

55

820 mm high

SF-EA

50

-82 45402

58

Not suitable for use with Slim Line worktops.

870 mm high

SF-EA

50

-87 45403

64

1105 mm high

as above, however, W x D = 80 x 80 mm

SF-EA

50 -110 45404

76

720 mm high

SF-EA

80

-72 48405

72

Not suitable for use with Slim Line worktops.

790 mm high

SF-EA

80

-79 48406

73

820 mm high

SF-EA

80

-82 48407

74

870 mm high

SF-EA

80

-87 48408

76

Square support leg of wood in carcase colour, height adjustment -10 mm, + 20 mm W x D = 80 x 80 mm

720 mm high

SF-EH

80

-72 33411

121

790 mm high

SF-EH

80

-79 33412

121

820 mm high

SF-EH

80

-82 33413

121

Not suitable for use with Slim Line worktops.

870 mm high

SF-EH

80

-87 33414

121

Not suitable for use with Slim Line worktops.

Support leg round 45 mm Ă˜ aluminium in stainless steel appearance, height adjustment: + 15 mm Not suitable for use with Slim Line worktops.

ZUB - EN

= Article cannot be compensated

Z 3.3

Worktop accessories

Points

Rotary bar frame, 340 mm wide aluminium in stainless steel appearance, consisting of: 1 bar console with rotary adapter, 2 bar feet on castors, one castor arrestable, 1120 mm high, 45 mm Ă˜, to mount breakfast bars of worktop material on the worktop, maximum worktop dimensions: W x D: 1600 mm x 400-500 mmÂ

Order No.

Width in cm

Abbreviation

for 70 mm plinth height

THEKE-GD

7

4507

292

for 100 mm plinth height

THEKE-GD

10 4510

292

for 150 mm plinth height

THEKE-GD

15 4512

292

for 200 mm plinth height

THEKE-GD

20 4519

292

ATG

4100

402

ABG

4145

349

Can only be planned in conjunction with base units!

Not suitable for use with Slim Line worktops.

Table frame for worktops 720 mm high, 790 mm deep, 1,490 mm - 2,490 mm long, worktop overhang on all sides: min. 5 mm, max. 105 mm Available in: 014 stainless steel appearance, 043 brilliant chrome

Bench base for worktops 415 mm high, 430 mm deep, 1,490 mm - 2,490 mm long, worktop overhang on all sides: min. 5 mm, max. 105 mm Available in: 014 stainless steel appearance

Z 3.4

= Article cannot be compensated

ZUB - EN

Worktop accessories

Points

Order No.

Width in cm

Abbreviation

Worktop accessories Spatter shield made of ESG glass 8 mm thick, 200 mm high, with 2 supports in stainless steel appearance for mounting on the worktop, can be planned behind hot plates and sinks

600 mm wide

APSS

60

33416

77

900 mm wide

APSS

90

33419

88

600 mm wide

APKS

60

4746

70

900 mm wide

APKS

90

4749

73

LGA

41

9505

19

LGA

54

9507

20

APVSB

9880

22

Socket strip „Alu Line“, pulls out Installation in worktop and wall unit bottom shelf is possible, height: 287 mm, pulls out 211 mm, 3 earthed sockets, 230 V drill hole: 102 mm 2500 mm connection cable Type F for Germany, Austria, Netherlands, Portugal, Spain, Sweden, Norway, Finland, Slovenia, Croatia, Greece, Turkey, Hungary, Russia

STDLH-F

4059

153

Socket strip „Alu Line“ ref. E for France, Belgium, Poland, Slovakia, the Czech Republic and Morocco

STDLH-E

33441

153

Socket strip „Alu Line“ type G for Great Britain, Ireland, Malta, Singapore, Hong Kong

STDLH-G

33442

153

Socket strip „Alu Line“, type J for Switzerland

STDLH-J

33443

153

Socket strip „Alu Line“, type K for Denmark

STDLH-K

33444

153

Socket strip „Alu Line“, type L for Italy

STDLH-L

33445

153

Socket strip „Alu Line“ Type B for Taiwan

STDLH-B

33446

153

Not suitable for mounting on Slim Line worktops.

Child safety guard for hobs and hot plates to be fitted on the worktop Not suitable for mounting on Slim Line worktops.

Ventilation grille, stainless steel 70 mm deep, for installation in worktops as venting for heating systems Cut-out dimensions LGA 41: 388 x 60 mm, ventilation cross section 70.2 mm Cut-out dimensions LGA 54: 518 x 60 mm, ventilation cross section 93.6 mm Not suitable for venting refrigerators.

Worktop sealing strip for individual orders as moisture protection for hot plate and sink cut-outs, as well as for use as steam protection beneath the worktop above dishwashers, incl. installation instructions.

Length: 9000 mm, width: 50 mm, thickness 0.5 mm The sealing strip is included with the delivery of the worktop.

ZUB - EN

= Article cannot be compensated

Z 3.5

Worktop accessories

Z 3.6

Order No.

Points

Width in cm

Abbreviation

Double socket, silver colour 2 earthed sockets, 230 V, with sliding covers.

For mounting on worktops, connection cable connected from below.

W = 322 mm, HÂ = 66 mm, D = 56 mm, 2,000 mm connection cable Type F for Germany, Austria, Netherlands, Portugal, Spain, Sweden, Norway, Finland, Slovenia, Croatia, Greece, Turkey, Hungary, Russia

STD-F

4298

70

Double socket with housing, ref. E for France, Belgium, Poland, Slovakia, the Czech Republic and Morocco

STD-E

33451

73

Double socket with housing, type G for Great Britain, Ireland, Malta, Singapore, Hong Kong

STD-G

33452

73

Double socket with housing, type J for Switzerland

STD-J

33453

73

Double socket with housing, type L for Italy

STD-L

33455

73

Double socket with housing, type B for Taiwan

STD-B

33456

73

Triple socket Power Corner, stainless steel appearance stainless steel housing and compensation piece, 3 earthed sockets, 230 V for vertical mounting on worktops in corners.

H = 460 - 560 mm, W = 80 mm, D = 80 mm 2,000 mm connection cable Type F for Germany, Austria, Netherlands, Portugal, Spain, Sweden, Norway, Finland, Slovenia, Croatia, Greece, Turkey, Hungary, Russia

STD3-F

33430

76

Triple socket, ref. E for France, Belgium, Poland, Slovakia, the Czech Republic and Morocco

STD3-E

33431

95

Triple Socket Type G for Great Britain, Ireland, Singapore, Hong Kong

33432

95

Triple socket, type J for Switzerland

STD3-J

33433

95

Triple socket, type K for Denmark

STD3-K

33434

95

Triple socket, type L for Italy

STD3-L

33435

95

Triple socket, type B for Taiwan

STD3-B

33436

95

= Article cannot be compensated

ZUB - EN

Worktop accessories

Order No.

Points

Width in cm

Abbreviation

Set of railing 1 in stainless steel appearance consisting of: 1 moulding, 600 mm wide (ref. 4053) 1 pegboard (ref. 4060)

600 mm wide

R-SET1

3501

48

Set of railing 2 in stainless steel appearance consisting of: 2 mouldings, 600 mm wide (ref. 4053) 1 pegboard (ref. 4060) 1 paper roll holder (ref. 4063)

1200 mm wide

R-SET2

3502

96

Set of railing 3 in stainless steel appearance consisting of: 3 mouldings, 600 mm wide (ref. 4053) 1 pegboard (ref. 4060) 1 paper roll holder (ref. 4063) 1 multi-functional tray (ref. 4064)

1800 mm wide

R-SET3

3503

150

Set of mouldings in stainless steel appearance consisting of: 1 moulding 2 end pieces 1 connector screws and dowels

600 mm wide

RS

60

4053

35

1200 mm wide

RS

120

4056

44

1500 mm wide

RS

150

4057

54

Pegboard in stainless steel appearance

380 mm wide

RS-HL

4060

25

Paper, cling and tin foil holder in stainless steel appearance 3 level, with cutting edge for cling and tin foil

352 x 150 x 305 mm

RS-RH3

4062

124

Paper roll holder in stainless steel appearance

352 x 150 x 255 mm

RS-RH

4063

39

Railing system

ZUB - EN

= Article cannot be compensated

Z 3.7

Worktop accessories

Z 3.8

Order No.

Points

Width in cm

Abbreviation

Multi-functional tray in stainless steel appearance

440 x 150 x 275 mm

RS-MA

4064

61

Spice rack in stainless steel appearance 2 level for bottles and jars up to 110 mm height and Ă˜ 59 mm

380 x 80 x 275 mm

RS-GB

4065

79

= Article cannot be compensated

ZUB - EN

4

Tall unit accessories

Tall unit accessories

4

Hanging basket for Cargo pull-out Hanging basket for larder pull-out Plastic trays for larder pull-out Anti-slip mats Internal pull-outs

Tall unit accessories

4

Tall unit accessories

Order No.

Points

Width in cm

Pull-Out mechanisms

Abbreviation

50 60

29227 29229

57 57

30 40

23860 23870

38 39

30 40

29703 29704

58 63

C 33860 C 33870

26 28

ZUB - EN

TB-HC

TB-HC

Hanging basket with wooden shelf and metal railing, including holder, matching pull-out larder premium

HA-K

Hanging basket with wooden base and glass side panelling matches Premium larder pull-out matches elements (35429, 35464, 25429, 25464, 20429, 20464, 30429, 30464, 37429, 37464, 45429, 45464, 40429, 40464)

HD-KG

HD-KG

Wire hanging basket silver coloured, including holder, matching pull-out „larder“ classic

Classic

HA-K

Plastic tray grey plastic, 2 pieces, suitable for hanging baskets in pull-out larder classic

HA-S

Anti-slip mats, anthracite for corner units and corner highboards with swivel pull-out 2 pieces matching for ref.

UEDSA* (21190/21191/21192), UEDSA*M (42190/42191/42192), UESA* (22190/22191/22192) and HESA* (35479/35480/35482)

RM-UESA

RM-UESA

RM-UESA

RM-UESA

RM-UESA

RM-UESA

Anti-slip mats, anthracite for pantry unit Cargo 2 pieces matching for ref.

(20571/20572, 25571/25572, 22711/22712, 35571/35572, 32711/32712, 45571/45572, 42711/42712)

RM-HC

RM-HC

Anti-slip mat, anthracite for larder units 2 pieces matching for ref. HA* (35429/35464, 25429/25464, 45429/45464)

RM-HA

= Article cannot be compensated

Premium

Premium

Tablar shelf with metal railing matches pantry unit „Cargo“

Classic

Accessories for tall units

HA-K

HA-K

HA-S

RM-HA

30 40

30 40

33861 33871

23 32

90 90 100 100 120 120

R L R L R L

29250 29251 29252 29253 29254 29255

22 22 26 26 26 26

50 60

29225 29226

13 15

30 40

23861 23871

13 15

Z 4.1

Tall unit accessories

Width in cm UIS UIS

UIS

UIS

UIS

UIS

UIS UIS

Latch for simultaneous opening of internal drawers suitable for pull-out units with internal drawers

MITIS

Internal pull-out drawer depth of 500 mm, matches units with front pull-out, for tall or base units.

Subsequent mounting requires that pull-out runners be ordered, refer to Accessories list, Chapter 8.

UIA

as above, however, matching elements with door hinge. incl. 2 x 25 mm compensation strip Not to be planned for units with front pull-out.

= Article cannot be compensated

Premium

UIS

UIA UIA UIA

UIA

UIA

Premium

UIA UIA UIA

Points

UIS

Not to be planned for units with front pull-out.

Where internal drawers are planned behind hinged doors, order a cutlery tray that is 50 mm shorter than the unit width!

Z 4.2

Order No.

as above, however, matching elements with door hinge. incl. 2 x 25 mm compensation strip

Premium

Internal drawer drawer depth of 500 mm, matches units with front pull-out, for tall or base units.

Subsequent mounting requires that pull-out runners be ordered, refer to Accessories list, Chapter 8.

Premium Pull-Out mechanisms

Abbreviation

30 50 60 80 90 100

-A -A -A -A -A -A

26732 26735 26736 26738 26739 26740

70 72 73 83 85 88

40 45 50 60

-T -T -T -T

26743 26744 26745 26746

69 69 70 72

26730

18

30 40 45 50 60

-A -A -A -A -A

26751 26752 26754 26755 26756

79 82 83 85 88

40 45 50 60

-T -T -T -T

26763 26764 26765 26766

79 80 82 83

ZUB - EN

5

Wall unit accessories

Wall unit accessories

5

Spice racks Steam protection Electrical sockets Shelf-holder Accessories for cooker hoods / chimneys

Wall unit accessories

5

Wall unit accessories

Points

Order No.

Width in cm

Abbreviation

Accessories for wall units Spice rack for 12 spice jars 456,5 mm high, 184 mm wide, 73 mm deep, without spices When installed at a later date, the wall unit loose shelf must be shortened by the customer.

Spices 12 jars, a selection of the most common spices.

Spice rack for 24 spice jars 456,5 mm high, 358 mm wide, 73 mm deep, without spices When installed at a later date, the wall unit loose shelf must be shortened by the customer.

ZUB - EN

GB

30

-12 9022

25

GB

40

-12 9023

25

GB

45

-12 9024

25

GB

50

-12 9025

25

GB

60

-12 9027

25

GD12

9487

25

GB

50

-24 9029

29

GB

60

-24 9030

29

Spices 24 jars, a selection of the most common spices.

GD24

9486

44

Steam protection plates for wall units near the hot plate, packed in pairs (1 set for LH and RH) Colour No.: 046 silver colour

DDS

4502

13

Socket strip „Alu Line“, pulls out Installation in worktop and wall unit bottom shelf is possible, height: 287 mm, pulls out 211 mm, 3 earthed sockets, 230 V drill hole: 102 mm 2500 mm connection cable Type F for Germany, Austria, Netherlands, Portugal, Spain, Sweden, Norway, Finland, Slovenia, Croatia, Greece, Turkey, Hungary, Russia

STDLH-F

4059

153

Socket strip „Alu Line“ ref. E for France, Belgium, Poland, Slovakia, the Czech Republic and Morocco

STDLH-E

33441

153

Socket strip „Alu Line“ type G for Great Britain, Ireland, Malta, Singapore, Hong Kong

STDLH-G

33442

153

Socket strip „Alu Line“, type J for Switzerland

STDLH-J

33443

153

Socket strip „Alu Line“, type K for Denmark

STDLH-K

33444

153

Socket strip „Alu Line“, type L for Italy

STDLH-L

33445

153

Socket strip „Alu Line“ Type B for Taiwan

STDLH-B

33446

153

= Article cannot be compensated

Z 5.1

Wall unit accessories

VBH5

Points

Shelf holders, stainless steel colour, suitable for wall shelf units from 6 to 52 mm thickness for mounting on the wall, height and shelf thickness adjustable between 6 - 52 mm, width: 30 mm, height: 102 - 148 mm, Included in delivery: 2 pieces

Order No.

Width in cm

Abbreviation

5130

26

4 pieces are necessary for wall shelves with widths upwards of 1001 mm!

Anti-slip mat, anthracite for corner wall units 2 pieces matching for ref. WEDD* (569)

RM-WED

60

29260

22

Recirculation set consisting of: • 1 x deflector with tube Ø 150 mm • 1000 mm long • 1 x flexible hose, 400 mm long • 1 x extension element from 125 to 150 mm • white exterior grid with back draught flap

DZ8405

18405

128

Flat duct set Euro Soft consisting of: • 2 x flat tube with socket, 1000 mm each • 1 x deflector with hose, 1000 mm incl. clips • 1 x transition element • 1 x galvanised wall duct housing • 1 x extension element from 125 to 150 mm

DZ8406

18406

269

Extraction set consisting of: • 1 extension element from 125 to 150 mm • 1 hose Ø 152 mm, 1500 mm long • 2 hose clips

DZ8417

18417

57

Cooker hoods accessories

Z 5.2

= Article cannot be compensated

ZUB - EN

6

Lighting

Lighting

6 Light fixtures Top shelf lights / -set Niche lights Fluorescent lights Ambience illumination Lighting accessories

Lighting

6

Lighting

Order No.

Points

Width in cm

Abbreviation

L-HMK

7086

28

HMKB-SET

5037

121

L-HKS

7095

34

HKSB-SET

5038

142

L-HSF

7087

20

HSFB-SET

5039

105

Light fixtures Surface mounted halogen spotlight HMK stainless steel appearance Light bulb 12 V/10W, Longlife 1800 mm long connection cable for transformer diameter of: 68 mm, height: 20 mm For mounting in glass wall units and bridging shelves .

For use as individual light - refer to accessories list, page Z 6.13.

Surface-mounted halogen spotlight set, HMK 3 Surface-mounted halogen spotlights (model 7086) 1 electronic transformer 105 VA 1 switch with power cable /230V Only suitable if used at a minimum distance of more than 150 mm from wood elements! Otherweise use cold spotlight L-HKS (7095).

Built-in halogen spotlight, HKS, with reduced heat emission stainless steel appearance Light bulb 12 V/10W, Longlife 1800 mm long connection cable for transformer diameter: 66 mm, height: 45 mm drill diameter: 55 mm For installation in cornice shelves and bridging shelves.

For use as individual light - refer to accessories list, page Z 6.13.

Built-in halogen spotlight set, HKS 3 Built-in halogen spotlights (model 7095) 1 electronic transformer 105 VA 1 switch with power cable/230V Indispensable where lamp is fitted in the doors swivel range!

Built-in halogen spotlight HSF stainless steel appearance Light bulb 12 V/10W, Longlife 1800 mm long connection cable for transformer diameter: 66 mm, built-in depth: 16 mm drill diameter: 55 mm For installation in cornice shelves and bridging shelves.

For use as individual light - refer to accessories list, page Z 6.13.

Halogen cold spotlight HSF 3 Built-in halogen spotlights (model 7087) 1 electronic transformer 105 VA 1 switch with power cable /230V Only suitable when a minimum spacing of more than 150 mm is always kept from the spotlight! If not, use cold spotlight L-HKS (7095).

ZUB - EN

= Article cannot be compensated

Z 6.1

Lighting

Order No.

Points

Width in cm

Abbreviation

LNP

5697

47

LNP-SET

5698

199

LSIR

5261

37

LED light set Sirio 3 LED lights Sirio (model 5261) 1 LED power supply set 1 sensor switch

LSIR-SET

5262

142

LED glass cabinet light Retangolo I stainless steel appearance LED - 2.9 W/12 V DC, 3200 K 1700 mm connection cable for the power supply set width: 25 mm, depth: 155 mm, height: 10 mm for mounting in glass wall units.

LVR

5419

58

LED light set Retangolo I 3 LED lights Retangolo I (model 5419) 1 LED power supply set 1 sensor switch

LVR-SET

5479

238

LED built-in light/built-on lamp Cubic 68 stainless steel appearance LED - 4.2W/12 V DC, 3600 K 1700 mm connection cable for the power supply set diameter: 75 mm, surface-mounted height: 16 mm built-in depth: 12 mm, drill diameter: 68 mm For installation in glass wall units, cornice shelves and bridging shelves.

LCUB

5422

70

LCUB-SET

5423

247

LED built-in / built-on lamp Nova Plus stainless steel appearance LED - 3.2W/12 V DC, 3200 K 1700 mm connection cable for the power supply set diameter: 75 mm, surface-mounted height: 14 mm built-in depth: 13 mm, drill diameter: 68 mm For installation in glass wall units, cornice shelves and bridging shelves.

For use as individual light - refer to accessories list, page Z 6.14.

LED light set Nova Plus 3 LED lights Nova Square (model 5697) 1 LED power supply set 1 touch dimmer For surcharge (MP-LNP) also available as lighted design for wall units.

LED built-in / surface-mounted light, Sirio stainless steel appearance LED - 1.65 W/12 V DC, 3200 K 1700 mm connection cable for the power supply set diameter: 64 mm, height: 23 mm built-in depth: 12 mm, drill diameter: 55 mm For installation in glass wall units, cornice shelves and bridging shelves.

For use as individual light - refer to accessories list, page Z 6.14.

For use as individual light - refer to accessories list, page Z 6.14.

For use as individual light - refer to accessories list, page Z 6.14.

LED light set Cubic 68 stainless steel appearance 3 LED lights, Cubic 68 (model 5422) 1 LED power supply set 1 switch with power cable /230V

Z 6.2

= Article cannot be compensated

ZUB - EN

Lighting

Order No.

Points

Width in cm

Abbreviation

5227

44

LED top shelf light set Sirio Long 3 LED top shelf lights Sirio Long (model 5227) 1 LED power supply set 1 sensor switch

LOSIRL-SET

5228

168

LED Top shelf light Retangolo II stainless steel appearance LED - 2.2W/12 V DC, 3200 K 1700 mm connection cable for the power supply set width: 40 mm, depth: 145 mm, height: 30 mm For mounting on wall units.

LORE

5480

58

LED top shelf light set Retangolo II 3 LED top shelf lights, Retangolo II (model 5480) 1 LED power supply set 1 switch

LORE-SET

5488

244

LED Top shelf light Flat-Top Stainless steel LED - 1.5W/12 V DC, 3600 K 1700 mm connection cable for the power supply set width: 45 mm, depth: 135 mm, height: 35 mm For mounting on wall units.

LOFT

5407

70

LED top shelf light set Flat-Top 3 LED top shelf lights, Flat-Top (model 5407) 1 LED power supply set 1 switch with power cable

LOFT-SET

5408

257

LED top shelf light Stabi Top aluminium housing, satin nickel finish LED - 4.2W/12 V DC, 3500 K 1700 mm connection cable for the power supply set width: 115 mm, depth: 185 mm, height: 35 mm For mounting on wall units.

LOST

5450

120

LOST-SET

5451

412

Top shelf lights LED top shelf light Sirio Long stainless steel appearance LED - 1.65 W/ 12 V DC, 3200 K 1700 mm connection cable for the power supply set width: 48 mm, depth: 150 mm, height: 25.5 mm For mounting on wall units.

LOSIRL

For use as individual light - refer to accessories list, page Z 6.14.

For use as individual light - refer to accessories list, page Z 6.14.

For use as individual light - refer to accessories list, page Z 6.14.

For use as individual light - refer to accessories list, page Z 6.14.

LED top shelf light set Stabi Top 3 LED top shelf lights, Stabi Top (model 5450) 1 LED power supply set 1 switch with power cable/230V

ZUB - EN

= Article cannot be compensated

Z 6.3

Lighting

Order No.

Points

Width in cm

Abbreviation

LOLH

4780

67

LOLH-SET

5025

229

LN15

5018

20

Recess spotlight DHL 2 Halogen recess lights, DHL (model 5018) 1 Halogen recess light, DHL, as master light (with switch) 1 electronic transformer 105 VA for master lights

LN15M-SET

5021

96

Halogen recess light Stratos Stainless steel Light bulb 12 V/10W, Longlife 1800 mm long connection cable for transformer width: 60 mm, depth: 160 mm, height: 52 mm For mounting beneath wall units.

LN3

4269

20

Halogen light set Stratos 2 Halogen recess lights, Stratos (model 4269) 1 Halogen recess light Stratos, as master light (with switch) 1 electronic transformer 105 VA for master lights

LN3M-SET

5036

98

Halogen recess light Mini stainless steel appearance Light bulb 12 V/20W, Longlife 1800 mm long connection cable for transformer diameter: 78.2 mm, height: 42.5 mm For mounting beneath wall units.

LN18

5068

23

LN18M-SET

5069

98

Top shelf halogen light, Cottage White dĂŠcor glass Light bulb 12 V/20W, Longlife 1800 mm long connection cable for transformer glass diameter: 66 mm, depth: 220 mm, height: 175 mm Available in: 092 pewter coloured, 074 burnished for mounting on wall units or cornice shelves, For use as individual light - refer to accessories list, page Z 6.13.

Halogen light set, Cottage 3 top shelf halogen lights, cottage style (model 4780) 1 electronic transformer 105 VA 1 switch with power cable/230V We recommend this light for 2030/2080mm unit height. If planned for 2330/2380mm unit height, a room height of 2550/2600mm is required!

Built-under lights Halogen recess light DHL Stainless steel Light bulb 12 V/20W, Longlife 1800 mm long connection cable for transformer width: 130 mm, depth: 125 mm, height: 30 mm For mounting beneath wall units.

For use as individual light - refer to accessories list, page Z 6.13.

For use as individual light - refer to accessories list, page Z 6.13.

For use as individual light - refer to accessories list, page Z 6.13.

Recess halogen spotlight set Mini 2 Halogen recess lights, Mini (model 5068) 1 Halogen recess light Mini, as master light (with switch) 1 electronic transformer 105 VA for master lights

Z 6.4

= Article cannot be compensated

ZUB - EN

Lighting

Order No.

Points

Width in cm

Abbreviation

5063

35

Recess halogen spotlight set Pal 2 Halogen recess lights, Pal (model 5063) 1 Halogen recess light Pal, as master light (with switch) 1 electronic transformer 105 VA for master lights

LN17M-SET

5064

126

Halogen recess light, Golden Eye silver coloured base, with 8 mm polished bevelled glass Light bulb 12 V/20W, Longlife 1800 mm long connection cable for transformer width: 130 mm, depth: 160 mm, height: 62 mm For mounting beneath wall units.

LN19

5095

57

Halogen light set, Golden Eye 2 Halogen recess lights, Golden Eye (model 5095) 1 Halogen recess light, Golden Eye, as master light (with switch) 1 electronic transformer 105 VA for master lights

LN19M-SET

5096

212

Exclusive LED recess light Point stainless steel appearance with lighting ring ambient lighting and work area light exchangeable ambience: 3200 K, work area light: 4000 K LED - 5.4 W/ 12V DC 1700 mm connection cable for the power supply set, diameter: 100 mm, height: 22 mm, built-in depth: 13 mm, drill diameter: 68 mm For mounting beneath wall units.

LP

5692

55

LP-SET

5690

242

LPR

5695

77

LPR-SET

5694

346

Halogen recess light Pal Stainless steel Light bulb 12 V/20W, Longlife 1800 mm long connection cable for transformer diameter: 120 mm, height: 38 mm For mounting beneath wall units.

LN17

For use as individual light - refer to accessories list, page Z 6.13.

For use as individual light - refer to list for accessories, page Z 6.13.

Only possible for use as individual light with LED starter set Point (LP-SSET).

Exclusive LED recess light set Point 3 LED recess lights, Point (model 5692) 1 LED starter set Point (LP-SSET) For surcharge (MP-LP) also available as lighted design for wall units.

Exclusive LED recess light Point RGB stainless steel appearance with lighting ring ambient lighting, work area light and RGB exchangeable ambience: 3200 K, work area light: 4000 K LED - 7.5 W/ 12V DC 1700 mm connection cable for the power supply set, diameter: 100 mm, height: 22 mm, built-in depth: 13 mm, drill diameter: 68 mm For mounting beneath wall units.

Only possible for use as individual light with LED starter set Point RGB (LPR-SSET).

Exclusive LED recess light set Point RGB 3 LED recess lights, Point RGB (model 5695) 1 LED starter set Point RGB (LPR-SSET) For surcharge ( MP-LPR) also available as lighted design for wall units.

ZUB - EN

= Article cannot be compensated

Z 6.5

Lighting

Order No.

Points

Width in cm

Abbreviation

5463

42

LED recess light set Delta 2 LED recess lights, Delta (model 5463) 1 LED recess light Delta, as master light (with switch) 1 LED power supply set

LNDLL-SET

5464

161

LED recess light Sirio Long stainless steel appearance LED - 1.65 W/12 V DC, 3200 K 1700 mm connection cable for the power supply set width: 48 mm, depth: 150 mm, height: 9.5 mm For mounting beneath wall units.

LNSIRL

5229

44

LED recess light set Sirio Long 2 LED recess lights Sirio Long (model 5229) 1 LED recess light Sirio Long as master light with touch dimmer 1 LED power supply set

LNSIRL-SET

5230

168

LED recess light Retangolo II stainless steel appearance LED - 2.2W/12 V DC, 3200 K 1700 mm connection cable for the power supply set width: 40 mm, depth: 145 mm, height: 14 mm For mounting beneath wall units.

LNRE

5489

58

LED recess light set Retangolo II 2 LED recess lights Retangolo II (model 5489) 1 LED recess light Retangolo II as master light with touch dimmer 1 LED power supply set

LNRE-SET

5490

239

LED recess light Stabi 180 aluminium housing, satin nickel finish LED - 4.2 W/12 V DC, 3500 K 1700 mm connection cable for the power supply set width: 10 mm, depth: 180 mm, height: 10 mm For mounting beneath wall units.

LNSTB

5448

77

LED recess light set Stabi 180 3 LED recess lights, Stabi 180 (model 5448) 1 LED power supply set 1 switch with power cable /230V

LNSTB-SET

5449

261

LED recess light EYE-Pod stainless steel appearance LED - 4.2 W/12 V DC, 3500 K 1700 mm connection cable for the power supply set width: 45 mm, depth: 180 mm, height: 10 mm

LNEYE

5446

80

LNEYE-SET

5447

320

LED recess light Delta Stainless steel LED - 1.65 W/12 V DC, 4000 K 1700 mm connection cable for the power supply set width: 150 mm, depth: 121 mm, height: 45 mm For mounting beneath wall units.

LNDLL

For use as individual light - refer to accessories list, page Z 6.14.

For use as individual light - refer to accessories list, page Z 6.14.

For use as individual light - refer to accessories list, page Z 6.14.

For use as individual light - refer to accessories list, page Z 6.14 .

For use as individual light - refer to accessories list, page Z 6.14.

LED recess light set EYE-Pod 3 LED recess lights, EYE-Pod (model 5446) 1 LED power supply set 1 switch with power cable /230V

Z 6.6

= Article cannot be compensated

ZUB - EN

Lighting

Points

LED recess light Flat Long Stainless steel LED - 6 W/12 V DC, 3600 K 1700 mm connection cable for the power supply set width: 80 mm, depth: 186 mm, height: 7 mm For mounting beneath wall units.

Order No.

Width in cm

Abbreviation

LNFLL

5402

108

LNFLL-SET

5403

346

For use as individual light - refer to accessories list, page Z 6.14.

LED recess light set Flat Long 3 LED recess lights, Flat Long (model 5402) 1 LED power supply set 1 switch with power cable/230V

Fluorescent tubes, metal coloured LED recess light Manila Plus housing in aluminium, stainless steel appearance plexiglass cover in satin finish, LEDÂ - 12 V DC, 3200 K 1700 mm connection cable for the power supply set depth: 34 mm, height: 13 mm 1 LED power supply set with touch dimmer (LED-SSET) For mounting beneath wall units.

220 mm / 4,2 W

LNMP22

5681

152

420 mm / 8,2 W

LNMP42

5682

158

720 mm / 14,2 W

LNMP72

5683

165

LED recess light Manila Plus in addition housing in aluminium, stainless steel appearance plexiglass cover in satin finish LED - 12 V DC, 3200 K 1700 mm connection cable for the power supply set depth: 34 mm, height: 13 mm For mounting beneath wall units.

220 mm / 4,2 W

LNMP22-E

5684

47

420 mm / 8,2 W

LNMP42-E

5685

57

720 mm / 14,2 W

LNMP72-E

5686

64

For surcharge ( MP-LMP) also available as lighted design for wall units.

ZUB - EN

LED recess light Stabi Long housing in aluminium, satin nickel finish LED - 2(3) x 4.2 W/12 V DC, 3500 K Depth: 10 mm, height: 10 mm 1700 mm connection cable for the power supply set 1 LED power supply set 1 switch with power cable/230V For mounting beneath wall units.

LNSTB

56

5452

222

LNSTB

86

5453

248

LED recess light Stabi Long, in addition housing in aluminium, satin nickel finish LED - 2(3) x 4.2 W/12 V DC Depth: 10 mm, height: 10 mm 1700 mm connection cable for the power supply set For mounting beneath wall units.

LNSTB

56

-E

5460

158

LNSTB

86

-E

5461

184

LED recess light Stabi-Line housing in aluminium, stainless steel appearance plexiglass cover in satin finish LED - 12 V DC, 4000 K depth: 20 mm, height: 16 mm 1700 mm connection cable for the power supply set 1 LED power supply set 1 switch with power cable/230 V For mounting beneath wall units.

560 mm / 5,3 W

LNSTL

56

5510

166

860 mm / 8 W

LNSTL

86

5512

191

LED recess light Stabi-Line in addition housing in aluminium, stainless steel appearance plexiglass cover in satin finish LED - 12 V DC depth: 20 mm, height: 16 mm 1700 mm connection cable for the power supply set For mounting beneath wall units.

560 mm / 5,3 W

LNSTL

56

-E

5511

101

860 mm / 8 W

LNSTL

86

-E

5513

126

= Article cannot be compensated

Z 6.7

Lighting

Order No.

Points

Width in cm

Abbreviation

Fluorescent light, Corner silver coloured housing with switch energy-saving light bulbs 9 W/11W Dulux cover of plexiglass, satin-finish 2000 mm connection cable/230 V depth: 45 mm, height: 45 mm For mounting beneath wall units.

1x9W

LA

45

4432

64

2x9W

LA

60

4433

73

2x9W

LA

75

4434

77

2 x 11 W

LA

100

4435

82

Recess light Corner Classic aluminium housing in stainless steel appearance, with switch and socket, left Light bulb: T5 cover of plexiglass, satin-finish 2000 mm connection cable/230 V depth: 63 mm, height: 63 mm For mounting beneath wall units.

700 mm / 14 W

LACP

70

5308

142

1000 mm / 21 W

LACP

100

5310

164

Work area lighting with switch and electronic ballast stainless steel housing, light bulbs: T5 plexiglass cover in satin finish 2000 mm connection cable / 230 V depth: 95 mm, height: 32 mm For mounting beneath wall units.

322 mm / 8 W

LNAL

32

5523

55

583 mm / 14 W

LNAL

58

5524

61

883 mm / 21 W

LNAL

88

5525

69

1183 mm / 28 W

LNAL

119

5526

73

246 mm / 6 W

LFR

30

5084

22

322 mm / 8 W

LFR

38

5085

23

589 mm / 14 W

LFR

65

5086

29

883 mm / 21 W

LFR

94

5087

34

Fluorescent tubes, white Fluorescent lights with switch and electronic ballast White housing, light bulbs: T5 1800 mm connection cable/230 V can be plugged in rows or with 170 mm long connection cable incl. mounting set depth: 43 mm, height: 22 mm For mounting beneath wall units.

Use only in combination with light pelmets!

Z 6.8

= Article cannot be compensated

ZUB - EN

Lighting

Order No.

Points

Width in cm

Abbreviation

Glass shelf with LED glass edge lighting Glass shelf, 8 mm thick, 257 mm deep with matt edge Aluminium light profile with LED 12 V DC 1700 mm connection cable for the power supply set

450 mm / 1,0 W

GB-WS

45

5244

45

500 mm / 1,2 W

GB-WS

50

5245

47

600 mm / 1,5 W

GB-WS

60

5246

60

800 mm / 2,0 W

Not suitable for 2-door wall units.

LED power supply set and switch not included in scope of delivery and must therefore be ordered separately - refer to accessories list, page Z 6.14.

GB-WS

80

5248

67

900 mm / 2,0 W

GB-WS

90

5249

69

1000 mm / 5,0 W

GB-WS

100

5252

74

Wall shelf units with lighting aluminium stainless steel appearance, with switch height: 50 mm, depth: 200 mm with connection cable and Euro plug  Light bulbs: T5 1800 mm connection cable/230 V Max. load capacity 1 kg/100 mm

450 mm / 8 W

WBLA

45

5290

114

500 mm / 8 W

WBLA

50

5291

117

600 mm / 8 W

WBLA

60

5292

124

800 mm / 14 W

WBLA

80

5293

134

900 mm / 14 W

WBLA

90

5294

149

Lighted wall shelf in solid glass appearance with switch, 30 mm thick, 200 mm deep with connection cable and Euro plug  incl. metal plug-in fittings Available in: 061 Glass appearance high gloss, 062 White high gloss, 063 Champagne high gloss, 065 Black high gloss, 068 Ivory high gloss, 077 Sand high gloss

450 mm / 6 W

WBLMG

45

5481

130

500 mm / 6 W

WBLMG

50

5482

133

600 mm / 8 W

WBLMG

60

5483

140

800 mm / 14 W

WBLMG

80

5484

152

900 mm / 14 W

WBLMG

90

5485

158

1000 mm / 14 W

WBLMG

100

5486

168

Upwards of 1000 mm widths will be supplied with 3 plug-in fittings!

1200 mm / 21 W

WBLMG

120

5487

199

RGB interior unit lighting for wall units in aluminium profile 1700 mm connection cable with RGB starter set

for 450 and 500 mm WS / 2.86 W

LRGB

50

5903

45

600 mm / 3,57 W

LRGB

60

5905

53

800 mm / 5.10 W

LRGB

80

5906

60

900 mm / 5,82 W

LRGB

90

5907

64

1000 mm / 6,55 W

LRGB

100

5908

70

1200 mm / 8,73 W

LRGB

120

5909

76

300 mm / 1,6 W

LSID

30

5910

95

400 mm / 1,9 W

LSID

40

5911

96

450 mm / 2,2 W

LSID

45

5912

96

500 mm / 2,4 W

LSID

50

5913

99

600 mm / 2,9 W

LSID

60

5915

117

800 mm / 3,9 W

LSID

80

5916

123

900 mm / 4,4 W

LSID

90

5917

126

1000 mm / 4,8 W

LSID

100

5918

142

LSO

5536

37

LSO-SET

5538

146

Ambience illumination

The RGB sterter set is not included in delivery. suitable set: RGB-SSET (5416)

LED interior unit lighting for base units with integrated sensor switch and additional switch to turn on continuous light aluminium housing with cover of plexiglass, satin finish LED - 12 V DC depth: 30 mm, height: 15 mm 1700 mm connection cable for the power supply set The LED power supply set is not included in delivery. suitable set: ESS6-LED (5401)

LED plinth light stainless steel frame 1.5 mm, glass cover, White LED - 0.5 W/12 V DC 1700 mm connection cable for the power supply set Dimensions: 70 x 70 mm built-in depth: 11 mm, drill diameter: 68 mm for mounting in plinth panels.

For use as individual light - refer to accessories list, page Z 6.14.

LED plinth light set 3 LED plinth lights (model 5536) 1 LED power supply set 1 sensor switch

ZUB - EN

= Article cannot be compensated

Z 6.9

Lighting

Points

Flex LED flexible light tape flexible 335 mm LED strip module, Black, self-adhesive can be shortened at 75 mm intervals (markings beneath the adhesive film) LED - 12 V DC 1700 mm connection cable for the power supply set width: 8 mm, height: 2.5 mm

Order No.

Width in cm

Abbreviation

900 mm / 2,4 W

LFLEX

90

5430

74

1200 mm / 3,2 W

LFLEX

120

5431

83

2400 mm / 6,4 W

LFLEX

240

5432

159

300 mm / 0,8 W

LIL-WEV

30

5440

47

7,7 W

PWL

60

6532

142

11,9 W

PWL

90

6533

165

Do not use beneath dishwashers!

LED power supply set and switch not included in scope of delivery and must therefore be ordered separately - refer to accessories list, page Z 6.14.

LED light Strip for end of run glass cabinet Glass edge lighting for end of run glass cabinet with solid glass door.

Alumimium light profile with LED incl. 1700 mm long connection cable for power supply set, Light bulb: 1.5 W, 12 V DC, H x D: 12 x 12 mm LED power supply set and switch not included in scope of delivery and must therefore be ordered separately - refer to accessories list, page Z 6.14.

LED wall light with mounting bracket for panel wall housing in stainless steel appearance, light swivels 135 °, LED - 12 V DC, 3000 mm connection cable for the power supply set LED power supply set not included in scope of delivery - refer to accessories list, page Z 6.14.

Accessories for lights Halogen electronic transformer 105VA/230V 170 mm long connection cable with AMP 10 input distributor 2900 mm power cable with plug

TR100

7083

41

Extension cable, 1.500 mm for extending the connection cable to the power supply

VK

7099

9

LED Power Supply Set LED converter 30 W/12 V DC 1800 mm long connection cable with AMP 6 input distributor 2000 mm power cable with plug

ESS6-LED

5401

58

LED extension cable, 1.800 mm for extending the connection cable to the power supply

VK-LED

5273

10

Triple distributor for 230 V 300 mm connection cable with Euro flat coupling, triple 1900 mm power cable with plug

LVT3

5298

16

VK-LN14

5062

15

Not suitable for LA*, LACP* and LNAL*.

Extension cable , 2000 mm, for 230 V lights for wall units with lighting design MP-LAS (7923) for extending the connection cable to the power supply

Z 6.10

= Article cannot be compensated

ZUB - EN

Lighting

Order No.

Points

Width in cm

Abbreviation

Rocker switch for 230V 1800 mm long connection cable with Euro flat coupler 1800 mm power cable with plug width: 40 mm, length: 35 mm, height: 15 mm

NK

7084

25

Sensor switch for 220V for touchless switching 1800 mm long connection cable for sensor 1800 mm long connection cable with Euro flat coupler 1800 mm power cable with plug

SEN220

5299

66

Remote control set for lights Sender and Receiver with Euro flat coupler and Euro flat plug

FUNK

5200

82

Double socket housing stainless steel height: 45 mm, width: 195 mm, depth: 92.5 mm 2000 mm connection cable/230 V for mounting beneath wall units

STD-ED

4559

35

RGB starter set, comprised of: radio remote control 1500 mm connection cable with RGB control LED converter 30 W/ 12 V DC 500 mm long connection cable with 4 input distributor 2000 mm power cable with plug

RGB-SSET

5416

146

RGB-FSET

5465

139

LPR-SSET

5946

183

VK-LNPR

5696

19

off

on

Lights and transformers up to 450 Watt can be switched.

L

2V

30-1

SLT

Required for RGB interior unit lighting LRGB*.

RGB follow-up set, comprised of: 2000 mm connection cable with RGB control amplifier for synchronous operation LED converter 30 W/12 V DC 500 mm long connection cable with 4 input distributor 2000 mm power cable with plug

ED

-S

45

W

12

V

to supplement the RGB starter set with more than 4 lights.

RGB starter set Point RGB, comprised of: LED converter 45 W/ 12 V DC 1800 mm long connection cable with 6 input distributor 2000 mm connection cable with 3 stage touch dimmer multichannel 2000 mm power cable with plug 1 radio remote control LED lighted design for MP-LPR: unit width 250-600 mm: 1 x 7.5 W unit width 800-1200 mm: 2 x 7.5 W LED extension cable set Point RGB 3 extension cables per light Point RGB, each 1800 mm

ZUB - EN

= Article cannot be compensated

Z 6.11

Lighting

Points

LED starter set, comprised of: 2000 mm connection cable with LED touch dimmer 1400 mm connection cable with dimmer LED converter 30 W/12 V DC 450 mm connection cable with 6 input distributor 2000 mm power cable with plug

Order No.

ED

any Germ in

hL

tung e

uc To LED OUT

IN DC

L

2V

30-1

SLT

mtleis

VDCGesa /24 12V 30W Max.

Mad

D im

m

LED ch ung -Tou eiterIN -Erw

er

ung eiter Erw OUT

Width in cm

Abbreviation

5941

117

LED-SSET2

5944

133

LED-FSET

5942

107

LP-SSET

5945

101

LED-SSET

Required for MP-WOGL, MP-LED, LUB*, MP-LNP and MP-LMP. as above, however for LED converter 60 W/12V DC 6 input distributor LED lighted design for MP-WOGL: unit width 300 mm: 4.8 W / unit width 400 mm: 6.72 W unit width 450 mm: 7.68 W / unit width 500 mm: 8.64 W unit width 550 mm: 9.6 W / unit width 600 mm: 10.56 W unit width 800 mm: 14.4 W / unit width 900 mm: 16.32 W unit width 1000 mm: 18.24 W LED lighted design for MP-LED and LUB: unit width 300 mm: 3.6 W / unit width 400 mm: 5.04 W unit width 450 mm: 5.76 W / unit width 500 mm: 6.48 W unit width 550 mm: 7.2 W / unit width 600 mm: 7.92 W unit width 800 mm: 10.8 W / unit width 900 mm: 12.24 W unit width 1000 mm: 13.68 W unit width 1200 mm: 16.56 W LED lighted design for MP-LNP: unit width 250-600 mm: 3.2 W unit width 800-1200 mm: 2 x 3.2 W LED lighted design for MP-LMP: unit width 300-450 mm: 4.2 W unit width 500-600 mm: 8.2 W unit width 800-1200 mm: 14.2 W Required for MP-WOGL, MP-LED, LUB*, MP-LNP and MP-LMP. LED follow-up set, comprised of: 2500 mm bus cable for synchronous operation LED converter 30 W/12 V DC 450 mm long connection cable with 6 input distributor 2000 mm power cable with plug To supplement the LED starter set with more than 6 lights.

30

SLT

L

V -12

LED starter set Point, comprised of: LED converter 30 W/12 V DC 1800 mm long connection cable with 6 input distributor 2000 mm connection cable with 3 stage touch dimmer multichannel 2000 mm power cable with plug LED lighted design for MP-LP: unit width 250-600 mm: 1 x 5.4 W unit width 800-1200 mm: 2 x 5.4 W

Z 6.12

= Article cannot be compensated

ZUB - EN

Assignment Accessories Halogen lighting

10 watts = max. 10 Lights 20 watts = max. 5 Lights

- EN ZUB

Z 6.13

Assignment Accessories LED lighting

max. 30 watts

Z 6.14

ZUB - EN

7

Wall panel system

Wall panel system Accessories Individual components

7 Wall panel system

Planning advice

Wall panel system

* Cut to size on site!

Wall panel system

7

Ordering information | Panel wall system Panel wall system

The panel wall system is ideal for enhancing free wall spaces as well as recesses. The panel wall system has a material thickness of 16 mm, is coated on both faces and is available in the décor groups matt, high gloss and stainless steel appearance. The mounted depth is 25 mm; which leaves a space of 9 mm for cable installation.

The panel wall system PW is comprised of individual panel elements PS, 368 mm high, which are joined with a profile system in stainless steel finish. The system can be customised with wall shelves, glass shelves, shelves, railing systems and LED lighting.

Planning with sets

For a quick and easy design, there are five panel wall sets available in the most convenient/advantageous sizes: a) The sets PW-52 / -180 for planning in recesses (-52: recess beneath wall units / -180: recess beneath cooker hoods) b) The sets PW-193 / -200 / -218, based on the three tall unit heights.

The system is available in every width between 250 and 2580 mm and is invoiced per every started 100 mm.

The sets are supplied with all necessary components: plinth panel (1), panel elements (2, 8), intermediate and end profiles (3, 4, 5) in addition to the respective mounting materials.

The sets include one end profile PWPS for the side; (6) planning a single set - with nothing directly adjacent – requires that a second end profile (PWPS) be ordered. Furthermore, all sets include a variable plinth panel 192 mm high to be cut to size on site as well as top compensation panels in the appropriate heights.

As a rule, within a set the panel elements (2, 8) are only available in a single décor. The direction of the décor structure is always horizontal. An alternative colour design is only possible by ordering as individual panel elements or as a combination of one set and one panel element.

Custom design of panel walls

The panel elements are always ordered for single positions, so that the décor can be freely selected for each individual panel element.

The panel elements are available in the standard height of 368 mm (PS) and in heights varying between 250 and 500 mm (PSV). Further height reductions are to be made on site.

Glass panel elements (PSG) are only available in standard sizes.

It is recommended that the panel walls be designed „from the bottom up“, e.g., starting at plinth height and adding panel elements as you work upwards according to the respective profile thickness.

- End profile bottom (PWPU) 4 mm (3) - Intermediate profile (PWPZ): 12 mm (4) - End profile top (PWPO): 16 mm (5) - Cassette brush (PWPB): 8 mm (7) Planning in the recess beneath wall units also requires an additional cassette brush PWPB (7) for the top end profile so that the cable leadthroughs for lighting and switches, etc. can be concealed along the rear.

The panel wall elements must be ordered 3 mm shorter for every visible side.

Vertical visible sides are covered with the end profile PWPS for the sides (6).

Planning cooker hoods with built-in spotlights towards the rear requires an additional back panel cladding PSD-110 (9) that is 25 mm thick. This cladding is automatically included in the panel wall set PW-180. The cladding PSD-110 is supplied 1100 mm high for adapting on site.

The back panel cladding should also be planned when no depth offset is desired in conjunction with the panel wall.

ZUB - EN

Z 7.1

Ordering information | Panel wall system Sample order

for planning a room-high panel wall with 2 different décors: Room height: Panel wall width: Décor: Visible sides: Plinth height:

2500 mm 1800 mm 022 White gloss and 048 Flared oak reproduction on left and right 150 mm

Your order reads: Quantity

KBZ

Order-no.

1x

SB 20-220

9235

plinth panel 022 White gloss, 2200 x 192 mm

1x

PWPU

6538

end profile bottom, 1794 mm

5x

PWPZ

6537

intermediate profile, 1794 mm

1x

PWPO

6534

end profile bottom, 1794 mm

1x

PWPN

6535

t-slot covers for end profile top, 1794 mm

4x

PS-37

6513

plinth panel 022 White gloss, 1794 x 368 mm

1x

PS-37

6513

panel elements 048 Flared oak reproduction, 1794 x 368 mm

1x

PSV-50

6515

plinth panel variable, 022 White gloss, 1794 x 430 mm

Description

Calculation of the variable height panel elements:

– – – – – = 2x

Z 7.2

PWPS

6539

2500 mm room height 150 mm plinth height 4 mm end profile bottom 60 mm 5 x 12 mm for 5 intermediate profiles 1840 mm 5 x 368 mm for panel elements 16 mm end profile top 430 mm PSV-50 panel elements, variable

end angle for side, 2500 mm

ZUB - EN

Abbreviation

Matt

Stainless steel appearance

Order Nr.

Width in cm

Planning gas hot plates in conjunction with recess panels requires a minimum spacing of 100 mm from the rear edge of the gas hot plate to the panel.

Points

High gloss

Panel wall system

6525

26,7 41,8 40,9

Panel wall sets Panel wall set, 520 mm high for recesses beneath wall units for mounting wall shelves, shelves, lighting and railing systems with panel wall mounting brackets, coated on both faces, horizontal structure mounted depth: 25 mm, width: 250 - 2580 mm

PW

-52

PW

-180 6526

37,8 71,8

—

PW

-193 6521

57,8 96,4

94

comprised of: 1 PWPB cassette brush 1 PWPO end profile top 1 PWPN t-slot cover 1 panel element 112 mm high 1 PWPZ intermediate profile 1 PS-37 panel element 368 mm high 1 PWPU end profile bottom 1 PWPS end profile side Colour no. refer to chap. 2 Price per started 100 mm.

In order to prevent the edge profile on the sides from protruding beyond the worktop, the panel wall elements must be ordered 3 mm shorter for every visible side. panel wall set, 700 - 1800 mm high for recesses with cooker hoods coated on both faces, horizontal structure mounted depth: 25 mm, width: 250 - 2580 mm comprised of: 1 PSD-110 panel element for planning behind cooker hoods 1 PWPO end profile top 1 PWPN t-slot cover 1 PSV-50 panel element 300 mm high 1 PWPZ intermediate profile 1 PS-37 panel element 368 mm high 1 PWPU end profile bottom Colour no. refer to chap. 2 Price per started 100 mm.

The rear panel cladding PSD-110 in 25 mm thicknessis required for planning cooker hoods with integrated spotlights in the rear area. This comes standard in the set.

In order to prevent the end profile on the sides from protruding beyond the worktop, the panel wall elements must be ordered 3 mm shorter for every visible side.

Panel wall set, 1930 mm high for tall unit height 01 coated on both faces, horizontal structure mounted depth: 25 mm, width: 250 - 2580 mm comprised of: 1 PWPO end profile top 1 PWPN t-slot cover 4 PWPZ intermediate profile 1 PWPU end profile bottom 1 plinth panel 192 mm high (to be adapted on site) 1 PWPS end profile side 4 PS-37 panel elements 368 mm high 1 PSV-50 panel element 390 mm high Colour no. refer to chap. 2 Price per started 100 mm.

In order to prevent the edge profile on the sides from protruding beyond the worktop, the panel wall elements must be ordered 3 mm shorter for every visible side.

A plinth height of 200 mm is not possible.

ZUB - EN

= Article cannot be compensated

Z 7.3

Abbreviaton

Panel wall set, 1997 mm high for tall unit height 02 coated on both faces, horizontal structure mounted depth: 25 mm, width: 250 - 2580 mm

Stainless steel appearance

Mat

Order No.

Width in cm

Planning gas hot plates in conjunction with recess panels requires a minimum spacing of 100 mm from the rear edge of the gas hot plate to the panel.

Points

High gloss

Panel wall system

PW

-200 6522

PW

-218 6523 65,8 110,7 107,9

57,8 96,4

94

comprised of: 1 PWPO end profile top 1 PWPN t-slot cover 4 PWPZ intermediate profile 1 PWPU end profile bottom 1 plinth panel 192 mm high (to be adapted on site) 1 PWPS end profile side 4 PS-37 panel elements 368 mm high 1 PSV-50 panel element 457 mm high Colour no. refer to chap. 2 Price per started 100 mm.

In order to prevent the end profile on the sides from protruding beyond the worktop, the panel wall elements must be ordered 3 mm shorter for every visible side.

A plinth height of 200 mm is not possible.

Panel wall set, 2183 mm high for tall unit height 03 coated on both faces, horizontal structure mounted depth: 25 mm, width: 250 - 2580 mm comprised of: 1 PWPO end profile top 1 PWPN t-slot cover 5 PWPZ intermediate profiles 1 PWPU end profile bottom 1 plinth panel 192 mm high (to be adapted on site) 1 PWPS end profile side 5 PS-37 panel elements 368 mm high 1 PSV-50 panel element 263 mm high Colour no. refer to chap. 2 Price per started 100 mm.

In order to prevent the end profile on the sides from protruding beyond the worktop, the panel wall elements must be ordered 3 mm shorter for every visible side.

A plinth height of 200 mm is not possible.

Z 7.4

= Article cannot be compensated

ZUB - EN

Abbreviation

Stainless steel appearance

Matt

Order Nr.

Width in cm

Points

High gloss

Panel wall system

Individual components for custom panel wall designs Panel elements, individual PS for custom panel wall designs PSV coated on both faces, 16 mm thick, edging all round, horizontal structure, width: 250 - 2580 mm

-37 -50

PSD

-110 6516

12 31 —

PSG PSG PSG PSG PSG PSG PSG PSG PSG PSG

45 50 60 80 90 100 105 110 120 150

-37 -37 -37 -37 -37 -37 -37 -37 -37 -37

6500 6501 6502 6503 6504 6505 6506 6507 6508 6509

47 48 50 57 57 66 67 69 73 85

PWPO

6534

4,5 4,5 4,5

PWPN

6535

2,8 2,8 2,8

PWPZ

6537

4,7 4,7 4,7

PWPU

6538

4,4 4,4 4,4

6513 4,4 11,8 11,4 6515 5,1 13,7 13,1

Heights: PS-37: 368 mm high PSV-50: 250 to 500 mm high Panel elements for planning behind cooker hoods as above, however 25 mm thick, height:Â 1100 mm, width: 250 - 2580 mm The rear panel cladding PSD-110 in 25 mm thickness is required for planning cooker hoods with integrated spotlights in the rear area.The rear panel cladding should also be planned when no depth offset is desired in conjunction with the panel wall.

Colour no. refer to chap. 2 Price per started 100 mm.

Panel elements of ESG glass, individual for custom panel wall designs lacquered rear face, 368 mm high, 16 mm thick, of which 4 mm is glass coating Available colours: 046 Silver 052 White high gloss 053 Black high gloss 159 Champagne high gloss 162 Glass appearance 176 Ivory high gloss End profile top in stainless steel appearance, incl. mounting material, with drill holes for mounting at intervals of 300 mm, height: 16 mm, width: 250 - 5300 mm

47 48 50 57 57 66 67 69 73 85

47 48 50 57 57 66 67 69 73 85

Price per started 100 mm.

T-slot covers for end profile top in stainless steel appearance, width: 250 - 5300 mm Price per started 100 mm.

Intermediate profile in stainless steel appearance, incl. mounting material, with drill holes for mounting at intervals of 300 mm, height: 12 mm, width: 250 - 5300 mm Price per started 100 mm.

End profile bottom in stainless steel appearance, incl. sealing lip and mounting materials, with drill holes for mounting at intervals of 300 mm, height: 4 mm, width: 250 - 5300 mm Price per started 100 mm.

ZUB - EN

= Article cannot be compensated

Z 7.5

Abbreviaton

Stainless steel appearance

Mat

End profile side in stainless steel appearance, incl. mounting material, max. length of 3000 mm

Order No.

Width in cm

Points

High gloss

Panel wall system

PWPS

6539

3,7 3,7 3,7

PWPB

6536

2 2 2

Price per started 100 mm.

Cassette brush for planning in recesses beneath wall units in stainless steel appearance, height: 8 mm, width: 250 - 5300 mm Price per started 100 mm.

Accessories for panel wall system Wall shelf, 16 mm thick with mounting bracket for panel wall 255 mm deep, polymer edge all round, includes mounting bracket in stainless steel appearance

PWB16 PWB16 PWB16 PWB16

50 60 80 90

16985 16986 16988 16989

111 128 142 149

111 128 142 149

— — — —

Wall shelf, 25 mm thick with mounting bracket for panel wall 255 mm deep, polymer edge all round, includes wall panel mounting bracket in stainless steel appearance

PWB25 PWB25 PWB25 PWB25

50 60 80 90

25985 25986 25988 25989

115 131 147 165

115 131 147 165

— — — —

Glass shelf with mounting bracket for wall panel 8 mm thick, 200 mm deep, edges sanded all round, incl. 2 shelf supports VBH5

PGB PGB PGB

30 60 90

6653 67 67 67 6656 98 98 98 6659 104 104 104

Shelf with mounting bracket for panel wall side depth: 150 mm, height: 380 mm

PWR PWR PWR PWR

50 60 80 90

6575 139 — — 6576 143 — — 6578 177 — — 6579 181 — —

PWPR PWPR

60 90

6530 6531

47 47 47 50 50 50

PWL PWL

60 90

6532 6533

142 142 142 165 165 165

6570

146 146 146

Available in all carcase colours.

Profile strip for railing system with mounting bracket for panel wall in stainless steel appearance, required as adapter for railing systems For railing systems refer to accessories list, chapter 3.

LED wall light with mounting bracket for panel wall housing in stainless steel appearance light swivels 135 °, LED - 12 V DC, 3200 K PWL60: 7.7 W, PWL90: 11.9 W 3000 mm connection cable for the power supply set LED power supply set not included in scope of delivery - refer to accessories list, page Z 6.14.

TV mounting bracket for flat screen TV with mounting bracket for panel wall, silver 60° swivellable (30° to the left and 30° to the right) 10° incline to the front and back suitable for use with TV dimensions from 19 to 32 in. (48 to 81 cm) load capacity up to 15 kg

Z 7.6

= Article cannot be compensated

PWTVH

ZUB - EN

8

General accessories

Optional cushioning for hinged doors Opening support mechanism Sensomatic opening system Opening angle limit Suspension systems Fastening bracket Polish for acrylic fronts Pull-out rails

8 General accessories

Eco-power cleaner

General accessories

8

General accessories

Order No.

Points

Width in cm

Abbreviation

D10

3888

60

Optional cushioning for revolving doors on corner wall units with 45° hinges and 170° hinges for mounting in carcase, Included in delivery: 5 pieces, silver colour

D5

3891

35

Opening support mechanism for handleless doors for screw mounting to the carcase interior.

Included in delivery: 5 pieces

PTO5

3857

26

up to 600 mm width

SOS-SET

-F

5238

314

from 800 mm width

SOS2-SET

-F

5241

505

ref. E for France, Belgium, Poland, Slovakia, the Czech Republic and Morocco

SOS-SET

-E 51238

314

SOS2-SET

-E 51241

505

Type G for Great Britain, Ireland, Singapore, Hong Kong

SOS-SET

-G 52238

339

SOS2-SET

-G 52241

531

Type J for Switzerland

SOS-SET

-J 53238

336

SOS2-SET

-J 53241

527

Type K for Denmark

SOS-SET

-K 54238

339

SOS2-SET

-K 54241

531

Type L for Italy

SOS-SET

-L 55238

349

SOS2-SET

-L 55241

540

Type B for Taiwan

SOS-SET

-B 56238

349

SOS2-SET

-B 56241

540

OWB10

3899

8,9

AHDS

4370

54

General accessories Optional cushioning for hinged doors to be screwed onto 110° mounting hinges, can be mounted on the left- or right-hand side.

Included in delivery: 10 pieces, silver coloured.

2 sets of cushions are required for hinged doors upwards of 1242 mm height!

Not possible with flaps, pull-outs or in combination with cushioning.

Sensomatic opening system for drawers and pull-outs for electro-mechanical opening of drawers and front pull-outs, comprised of: drive unit, connection cable, power supply unit, power cable, spring-loaded bumper for front, mounting screws and assembly instructions Type F for Germany, Austria, Netherlands, Portugal, Spain, Sweden, Norway, Finland, Slovenia, Croatia, Greece, Turkey, Hungary, Russia

One opening system is required per drawer or pull-out.

85° Opening angle limit for pushing in 110° mounting hinges and in hinges for WED/WEDD, can be mounted on the left-hand or right-hand side Included in delivery: 10 pieces Not possible with 170° hinges!

Wire suspension lowering height up to 1000 mm, consisting of two 1000 mm long wire ropes, top wire holder, bottom wire holder with infinite vertical adjustment, chromeplated, 8 mm dowels, mounting plate and screws.

ZUB - EN

= Article cannot be compensated

Z 8.1

General accessories

Points

Order No.

Width in cm

Abbreviation

Suspension system, stainless steel appearance 2 rods with mountings, incl. 10 mm heavy-duty dowels, max. lowering height: 450 mm, fine adjustment possible, suitable for lowering worktops, bridges, canopies etc.

AHS500

-NI 7292

142

as above, however, lowering height up to 980 mm

AHS1050

-NI 7046

166

Fastening angle 50 mm wide, white, for freely suspended bridgings or cornice shelves, incl. fastening screws and dowels

WZBW

2700

15

Eco-power cleaner 500 ml spray bottle, for household cleaning purposes, especially for kitchens, offices, business, worktop, leisure and hobby • removes a large number of soiling • powerful, dirt dissolving, mild cleaner • biologically degradable, phosphate free, not etching, • without solvent • concentrate to be diluted with water 1:20

OKR

9458

25

Polish for acrylic fronts ULTRA GLOSS super polish, lacquer cleaner, polish and durable sealant all in one

POLI

4983

22

for drawers in the widths 300-1000 VAS45-56 mm and pull-outs in the widths 300-600 mm

26996

28

for drawers in the widths 300-1000 VAS45-46 mm and pull-outs in the widths 300-600 mm

26993

38

Mounting to concrete ceiling only!

Pull-out rails Full pull-out runners with automatic closing for drawer and pull-out depth of 500 mm (side depth of 560 mm) load capacity up to 40 kg

as above, however, for drawer and pull-out depth of 400 mm (side depth of 460 mm)

Z 8.2

Full pull-out runners with automatic closing for drawer and pull-out depth of 270 mm (side depth of 320 mm) load capacity up to 40 kg

for drawers and pull-outs in the widths 300-1000 mm

VAS23-32

26991

37

Full pull-out runners with automatic closing for drawer and pull-out depth of 500 mm (side depth of 560 mm) load capacity up to 60 kg

for pull-outs in the widths 800900 mm

VAS90-56

26997

42

Full pull-out runners with automatic closing for drawer and pull-out depth of 500 mm (side depth of 560 mm) load capacity up to 70 kg

for pull-outs in the width 1000 mm

VAS100-56

26998

38

Full pull-out runners with automatic closing for drawer and pull-out depth of 400 mm (side depth of 460 mm) load capacity up to 60 kg

for pull-outs in the widths 8001000 mm

VAS100-46

26994

44

= Article cannot be compensated

ZUB - EN

Printed on PEFC paper!



