9 minute read
ADVOCACY
A 2022 RED HOT SUMMER
by Omar S. Nashashibi, co-founder, The Franklin Partnership, LLC
In addition to a global heat wave that did not spare the US, Russia and China continued to dominate the headlines here in Washington, D.C. in the summer of 2022. Some supply chain and energy disruptions began to ease, but tensions with China increased, culminating with an announced visit by Speaker Nancy Pelosi to Taiwan.
On the trade front, the American Mold Builders Association used its summer to press the office of the US Trade Representative (USTR) to keep the 25% tariffs on Chinese molds, dies and tooling and to testify before the US International Trade Commission (ITC) on how the tariffs on China continue to help the industry.
The Biden administration is internally deliberating in a very public way whether to keep the 25% and 7.5% tariffs on over 10,000 imports from China. Federal law requires the government to review the Section 301 tariffs after four years – that date falling on July 6, 2022. USTR announced it would continue the tariffs while it conducts the formal review; however, AMBA did not waste time. The association activated its membership, who were among the 327 stakeholders filing comments with the USTR in support of continuing some or all tariffs on Chinese imports.
In its filing supporting the 25% tariffs on molds and dies, AMBA stated that over half of its members took on new business from China after a customer wanted the product manufactured in the US due to the tariffs on imports. AMBA believes amble capacity exists, as according to the US Census, the federal government identified 1,381 industrial mold building establishments as of 2020, over 200 of which are members of the association. Importers continue to claim supply shortages in their ongoing efforts to lift the tariffs.
Sources in Washington indicate that the Biden administration deliberations over how to handle the Trump-imposed tariffs involved whether to keep some, all, or none of the tariffs. Another option also surfaced in September 2021 with increasing support – initiating a new Section 301 tariff action on China, this one focused on State-Owned Enterprises and government subsidies. While the USTR reviews the comments received in support of the tariffs and considers next steps, importers are anxiously awaiting word on not only the fate of the tariffs but also the restarting of an exclusion process. Previously, companies could petition USTR for a temporary suspension of tariffs on a specific product. With the exclusion portal closed through the summer, pressure continues to build on USTR to restart the process and allow more imports to enter without tariffs.
In a separate review of the Section 301 tariff action, the US International Trade Commission held a three-day hearing in late July to review the impact of the China tariffs on US industry. Congress in March 2022, passed a law requiring the ITC to conduct the investigation and issue a report by March 2023. The ITC heard from roughly eighty witnesses, many in favor of lifting the Section 301 tariffs on China, with AMBA being one of the few groups testifying in support of domestic industry in favor of the tariffs.
AMBA managing director Kym Conis testified that in a recent survey, 70% of mold builders reported that suspending the 25% tariffs on Chinese molds and dies would have a negative impact on their business, with 44% reporting an immediate negative impact. The ITC Commissioners asked questions of the witnesses as they sought more information on how the tariffs have directly supported American manufacturers.
The ITC will not issue recommendations or make a decision to lift the tariffs; however, its economic study will contribute to the decision-making process and add to the ongoing debate over the effectiveness of the tariffs. Few believe the Section 301 trade action has led China to change its predatory behavior towards the American industry, but AMBA continues to argue that targeted tariffs have supported the industry. However, as AMBA testified, the 25% tariff on Chinese molds still does not fully counter the “China price”, which member companies report is up to 70% below quotes for US molds.
The White House and federal agencies are not alone in their focus on China this summer. In a rare bipartisan vote,
page 31
the US Congress passed into law legislation to counter China’s technological rise and invest in US advanced manufacturing and the semiconductor industry. After months of tense negotiations, lawmakers sent President Biden the CHIPS and Science Act of 2022, which invests billions of dollars in US manufacturing, including $52 billion over five years to incentivize and support the manufacture of semiconductors in the US.
Sources indicate that Beijing spends roughly $150 billion annually on semiconductors and R&D, but the action by Congress this summer will inject some important government support for the American industry. The new law creates a 25% advanced manufacturing investment credit for investment in semiconductor manufacturing and semiconductor manufacturing equipment. The legislation also provides over $5 billion for workforce training and development, along with other provisions focused on workforce and education.
The attention from Washington on China has not gone without notice in Beijing. Security and economic tensions continue to heat up with at one point this summer, rumors of Chinese military mobilization in response to Speaker Pelosi’s visit to Taiwan. Tensions are unlikely to lessen anytime soon with the US election only months away and many politicians citing the Chinese Communist Party in their campaign ads.
The AMBA is using the attention on China to direct policymakers’ attention towards the Chinese molds, dies and other tooling that undercuts the American industry. The summer has brought opportunity to have all policymaking branches of the federal government focus their attention on China. AMBA’s comments to USTR in June, followed by testimony to the ITC in July, helped reinforce the message that Washington should not let up on China and must keep the 25% tariffs on the products members manufacture in the US.
It is important that the attention on China’s trade policies not end with the summer or with the coming November election. For now, it appears the red hot focus on Beijing only will increase as the Biden administration nears a decision on the 25% tariffs. Stay tuned.
Omar Nashashibi is a founding partner at The Franklin Partnership, LLC, a bipartisan government relations and lobbying firm retained by the American Mold Builders Association in Washington, D.C.
Are you ready to TAKE CONTROL
of one of your company’s largest expenses?
AMBA is combatting members’ rising insurance costs with tailored strategies that positively impact both your employees and your company.
Visit amba.org/captiv8 to learn more. Introducing CAPTIV8, health insurance strategies created for mold manufacturers.
Regal Components
Higher Standards for Molds and Dies
Molders with non-standard requirements can order custom precision core pins, sleeves, ejectors, blades and punches from Regal Components. Custom components are used in molding a variety of medical, electronics and consumer products that require extreme precision, such as needles sheaves, closures, nipples, pipettes, IV connectors, shavers, electronic components and writing instruments.
Components can be ground to a tolerance of ±0.000050 inches, with tips as small as 0.002 inches and lengths up to 14 inches. Custom details such as tapers, rings, vents, ribs and spirals can be shaped using wire EDM. In addition to standard tool steel, components can be made of powdered steels, stainless steel and copper alloys including M-2, A-2, H-13, S-7, PMM-4, PM1 0V420SS for greater control over thermal transfer, tensile strength, hardness and other physical properties. The molding surface can be polished, coated and/or plated.
10 Almeida Avenue, East Providence, RI 02914
(Q 727 -299-0800 � 727 -499-7109 @) sales@regalcomps.com @regalcomps.com
800-760-5715
1 2 3
GRAHAM ENGINEERING ACQUIRES KENNEDY TOOL & DIE Graham Engineering Company, LLC (GEC), York, Pennsylvania, and Kennedy Tool & Die, Inc., Birdsboro, Pennsylvania, announce that GEC has acquired Kennedy, a leading precision manufacturer of molds and tooling used in blow molding, reactioninjection molding, thermoforming and structural-foam molding. The acquisition of Kennedy’s engineers, tool makers and machinists will accelerate GEC’s ability to support customers throughout the life of their extrusion equipment. Kennedy’s operation will remain in Birdsboro, Pennsylvania, providing essential contributions to GEC’s aftermarket business. For more information, visit www.grahamengineering.com.
[1] GROB SYSTEMS BUILDS WORKFORCE THROUGH APPRENTICESHIP PROGRAM GROB Systems, Inc., Bluffton, Ohio, is a global leader in the development of manufacturing systems and machine tools. GROB Systems hosted a 2022 Apprenticeship Class orientation and signing day on June 4, 2022. New apprentices and their families learned about what to expect from the GROB Apprenticeship Program and celebrated with a signing day. The 2022 apprenticeship class is made up of 41 individuals from 25 area high schools and six area career centers. For more information, visit www.grobsystems.com.
HASCO AWARDED BEST PLACES TO WORK HASCO America Inc., Fletcher, North Carolina, was recently presented with a special award. “Best Places to Work 2022.” As a leading manufacturer of high-quality modular, standardized components and individually planned hot runner systems, HASCO offers designers, moldmakers and injection molders innovative and costefficient solutions. In the Plastics News competition, 22 companies participated, and the 18-strong US team was able to convince the judges about their good working climate and team spirit. For more information, visit www.hasco.com/en/. INTEGRITY RECOGNIZES DMS WITH STRATEGIC SUPPLIER AWARD Die Mold Services (DMS), Oldcastle, Ontario, was awarded Integrity’s Strategic Supplier Award. This award is given to an elite group of suppliers whose performance consistently has exceeded requirements, including meeting customers’ delivery, pricing, customer service, quality and technology requirements, as well as conducting outstanding performance regionally and globally. For more information, visit www.dmscomponents.com.
[2] REGISTRATION OPEN FOR ANNUAL ALLIANCE CHARITY GOLF OUTING Alliance Specialties and Laser Sales once again will partner with the iWarriors organization during its annual golf outing in Mundelein, Illinois, at Countryside Golf Club, on September 23, 2022. The annual event supports the iWarriors mission, which is to assist severely injured members of all branches of the Armed Forces by providing them with personalized tablets to aid in their return, recovery and reintegration. The golf outing will kick off with an open house at the Alliance facility, followed by registration, lunch and a shotgun start at noon CST. Event information, including sponsorships, registration and more are available at www.Alliance-Charity-Golf-Outing.eventlify.com.
[3] PMG AND INDUSTRIAL MOLDS PURCHASE AUTOMATED MACHINES Pyramid Molding Group (PMG), Rockford, Illinois, is the parent company of Industrial Molds and Pyramid Plastics. Industrial Molds has purchased three new automated machines to increase overall efficiency and performance. The first new machine of 2022 for the company is the HAAS VF-2 vertical machining center, featuring 40 tapers, 3-axis machining with a high-power, direct-drive spindle at up to 8,100 rpm max speed, and a 20-pocket carousel tool changer. For more information, visit www.pyramidmoldinggroup.com.
