Rubberizing Clipper Bodies Using Flex Seal

April / June 2021

PetGroomer.com Publications Rubberizing Clipper Bodies Using Flex-Seal

Northern Tails Sharpening

Flex Seal produces a rubber type coating on your clipper that prevents it from slipping in your wet hands. Now every clipper can have a rubberized body.

► Prepare your clipper by laying it flat on a protected surface with the bottom side up. You will only be spraying the bottom of the clipper.

► Cut small pieces of tape for protection from the spray. Cover the screw holes and the hinge to include the whole front end as shown below. Make sure you cover all areas that you do not want rubberized. These areas include the entire hinge, the front of the clipper and anything on the side of the clipper like a switch or touchpad.

► You are ready to spray. If this is your first time to use FlexSeal, I suggest you practice on another object and not your clipper. Hold the can of FlexSeal about 12 inches from the object and spray in short bursts, back and forth. FlexSeal comes out of the can quickly. Be very careful to prevent runs from excess solution. Refer to the picture above; see the runs?

When it dried it looked OK and was the same color as the clipper. Allow at least 24 hours to dry. Peel the pieces of tape off and you are ready to groom. FlexSeal sticks on clippers well.

FlexSeal has many other uses for repelling water. Now it has a function for the grooming industry. If your clipper doesn’t have a rubberized body and it slides in your hand, rubberize it! The cost is about $12.00 for FlexSeal Clear. ▀

Jeff Andrews is "One of America's Favorite Sharpeners." Along with his years of grooming experience in two of his own shops, he is a "World Class Sharpener" that can sharpen all grooming equipment to better than new condition. Jeff is an author and pioneer of many maintenance and grooming video's and articles. They are for groomers who want to make their equipment last longer and save money on their sharpening costs. These videos and articles are on his website free to download and keep for reference. www.northerntails.com