Приводные ремни Contitech belts

Power Transmission Products: List of Dimensions Power Transmission Group

ContiTech – Division of Continental Corporation

CONTI SYNCHROFORCE Supreme* CONTI SYNCHROFORCE Extreme*

Table of contents

CONTI SYNCHROFORCE CXP III CONTI SYNCHROFORCE CXA III CONTI Power Transmission Belts Product overview CONTI SYNCHROBELT

CONTI SYNCHROLINE

CONTI SYNCHROTWIN

CONTI SYNCHRODRIVE

CONTI SYNCHROCOLOR*

CONTI-V MULTIRIB Power CONTI-V MULTIRIB Elast

CONTI-V STANDARD

CONTI-V ADVANCE

CONTI-V ADVANCE FO-Power

CONTI POLYFLAT

CONTI VARISPEED

CONTI-V MULTIBELT

CONTI VSM-1/VSM-2*

*not included in this brochure

2/3

CONTI SYNCHROFORCE CXP III HTD Heavy-duty timing belts 4/5 Section: 3M 5M 8M 14M CONTI SYNCHROFORCE CXP III STD Heavy-duty timing belts 6 Section: S8M

CONTI SYNCHROFORCE CXA III HTD Heavy-duty timing belts 7 Section: 8M 14M

CONTI SYNCHROFORCE CXA III STD Heavy-duty timing belts 8 Section: S8M

CONTI SYNCHROBELT Timing belts, DIN 5296

9 - 11

Section: MXL XL L H XH CONTI SYNCHROBELT HTD Timing belts Section: 3M 5M 8M 14M

12/13

Table of Contents

CONTI SYNCHROBELT STD Timing belts

14

Section: S8M

CONTI SYNCHROLINE HTD Open-ended timing belts

20

DIN 5296 Section: DH

15

CONTI SYNCHRODRIVE HTD Open-ended PU timing belts

21

Section: 3M 5M 8M 14M

Section: 5M 8M

CONTI SYNCHROLINE STD Open-ended timing belts

CONTI SYNCHROTWIN DH Double-sided timing belts

15

CONTI SYNCHRODRIVE STD Open-ended PU timing belts

CONTI SYNCHROTWIN CXP III DHTD Heavy-duty double-sided timing belts 16 Section: D5M D8M D14M

SYNCHROTWIN

CONTI CXP III DSTD Heavy-duty double-sided timing belts 17

CONTI SYNCHRODRIVE Open-ended PU timing belts

21

DIN 7753 Section: SPZ SPA SPB 19 SPC CONTI-V ADVANCE FO-Z Heavy-duty raw edge cogged V-belts

34/35

CONTI-V ADVANCE FO-Z Classic Heavy-duty raw edge cogged V-belts 36/37 DIN 7753 Section: 5/10/Z 6/Y 13/A 8/-

22 CONTI-V ADVANCE FO-Power Heavy-duty raw edge cogged V-belts

Section: Trapezoidal XL L H CONTI SYNCHRODRIVE Open-ended PU nubbed belts

32/33

DIN 7753 Section: XPZ XPA XPB XPC

Section: S5M S8M

Section: S8M

CONTI-V STANDARD Ultraflex Narrow section wrapped V-belts

23

38

DIN 7753 Section: XPZ XPA XPB XPC CONTI POLYFLAT Open-ended PU flat belts

39

Section: DS8M

CONTI-V MULTIRIB Power, Elast Multiple V-ribbed belts 24/25 CONTI SYNCHROTWIN DHTD Double-sided timing belts

18

Section: D5M D8M D14M

DIN 7867 Section: PJ PK PL PM

CONTI VARISPEED Varidur, Agridur Variable speed raw edge cogged belts

40 - 41

DIN 7719 / ISO 1604

CONTI-V STANDARD Multiflex Classical section wrapped V-belts 26 - 31 CONTI SYNCHROTWIN DSTD Double-sided timing belts Section: DS8M

19

DIN 2215 Section: 8/17/B 25/10/Z 20/- 32/D 13/A 22/C 40/E

CONTI-V MULTIBELT Banded V-belts

42 - 44

1

Product overview

ContiTech Power Transmission Products are state of the art products in respect of design and material specification.

Ultra-modern manufacturing techniques developed through continuous improvement and tightly controlled quality assurance guidelines ensure all CONTI power transmission products are consistently produced to the highest standard.

ContiTech Power Transmission Belts are the highest quality products due to: – the super high level of integrated design work as standard throughout the product range – the stringent quality assurance system that our production processes adhere to – the highest levels of process control within our manufacturing areas ContiTech’s Power Transmission Engineers have the solutions for your transmission problems: – vast experience of products and applications often operating in difficult environments – reliable computer assisted drive advice – fast response time to most driverelated questions – close ties to front line R&D activities meaning step-change improvements direct to the customer – continuously updated product range to meet global market demands – standard range products designed and manufactured to meet the demands of multinational Original Equipment manufacturers

The Premium Quality Logo is the guarantee for: – even longer service life – even greater reliability

2

CONTI-V STANDARD Ultraflex CONTI-V STANDARD Multiflex CONTI-V ADVANCE FO-Z Matched V-Belt sets L=L guarantee: – – – –

even load distribution smooth operation high performance cost-effectiveness in multi-groovepulley drives

– Matched V-belt sets L=L are available from lengths of 1000 mm upwards – They are identical in length and can be made up into sets without any further dimensional checks – L=L V-belts are precision made by means of the most advanced production process, employing a newly developed stabilizing system.

A special feature of L=L belts is their uniform elasticity, distributing the stress evenly on individual belts, while reducing the overall stretch.

Surcharges for special V-belt Types – quiet operational requirements (LR) – restricted length tolerance – aramid tension member (ZAR)

+25% +20% +65%

Non-standard range * = Non-stock items where production requires a minimum order quantity.

Prices for unlisted dimensions and special types are available on request.

Conditions of sale All sales subject to our standard Conditions of Sale - copies available on request.

The prices included in this list are subject to alteration without prior notice and supercede all previous prices.

Product overview

CONTI VSM-1/VSM-2 tension gauges The CONTI VSM-1/VSM-2 tension gauges are fully electronic measuring devices specially designed for measuring the initial tension of timing belts, multiple V-ribbed belts and V-belts, no matter what the belt´s tension member is made of.

The display shows the natural frequency of forced vibrations on the free span length, from which the initial tension in the belt can be easily calculated.

Supplied in a robust plastic case.

Additional features VSM-2: – Serial interface for connection to PC – Initial tension data can be logged and processed – Incorporation in quality assurance process when checking series products Technical data: Measuring range: Resolution: L x W x H: Sensor:

10 to 500 Hz 1 Hz approx. 120 x 60 x 25 mm (without sensor) optical sensor at the end of a flexible arm

Article no. 67 79 093 (VSM-1) Article no. 67 79 090 (VSM-2) CONTI V-belt tension gauge Can be used for: – CONTI-V ADVANCE FO-Z heavy-duty cogged raw-edge V-belts Sections: XPZ, XPA, XPB, XPC – CONTI-V STANDARD Ultraflex narrow-section wrapped V-belts Sections: SPZ, SPA, SPB, SPC – CONTI-V STANDARD Multiflex classical-section wrapped V-belts Sections: 10/Z, 13/A, 17/B, 20/-, 22/C, 25/-, 32/D

Article no. 67 79 004 CONTI V-belt length gauge Can be used to determine the exact length of the following drive belts (between 500 and 2600 mm): – CONTI-V ADVANCE FO-Z heavy-duty cogged raw-edge V-belts Sections: XPZ, XPA, XPB, XPC – CONTI-V STANDARD Ultraflex narrow-section wrapped V-belts Sections: SPZ, SPA, SPB, SPC – CONTI-V STANDARD Multiflex classical-section wrapped V-belts Sections: 10/Z, 13/A, 17/B, 20/-, 22/C, 25/-, 32/D Article no. 67 79 003

3

Timing belts

CONTI SYNCHROFORCE® CXP III Heavy-duty timing belts HTD

Features – Moderately oil-resistant – Resistant to temperatures from –20 °C up to +100 °C (depending on application) – Non-ageing and ozone-resistant – Suitable for tropical climates – Electrically conductive (antistatic) to ISO 9563

Section 3M 5M 8M 14M Section 3M 5M 8M 14M

z: number of teeth Section 3M Section

1

1 1

1 1

1

1

1

4

*111 - 3M CXP III *117 - 3M CXP III *129 - 3M CXP III *141 - 3M CXP III *144 - 3M CXP III 150 - 3M CXP III *156 - 3M CXP III *159 - 3M CXP III *168 - 3M CXP III *174 - 3M CXP III *177 - 3M CXP III 180 - 3M CXP III *186 - 3M CXP III *192 - 3M CXP III *201 - 3M CXP III *204 - 3M CXP III *210 - 3M CXP III *213 - 3M CXP III 216 - 3M CXP III 225 - 3M CXP III *240 - 3M CXP III 246 - 3M CXP III *252 - 3M CXP III *255 - 3M CXP III *267 - 3M CXP III *285 - 3M CXP III *294 - 3M CXP III *300 - 3M CXP III *312 - 3M CXP III *318 - 3M CXP III *336 - 3M CXP III *339 - 3M CXP III 363 - 3M CXP III *384 - 3M CXP III *390 - 3M CXP III *393 - 3M CXP III *420 - 3M CXP III *447 - 3M CXP III 474 - 3M CXP III *480 - 3M CXP III *486 - 3M CXP III *489 - 3M CXP III *495 - 3M CXP III *501 - 3M CXP III *513 - 3M CXP III *522 - 3M CXP III *525 - 3M CXP III *537 - 3M CXP III

Lp (mm) 111.00 117.00 129.00 141.00 144.00 150.00 156.00 159.00 168.00 174.00 177.00 180.00 186.00 192.00 201.00 204.00 210.00 213.00 216.00 225.00 240.00 246.00 252.00 255.00 267.00 285.00 294.00 300.00 312.00 318.00 336.00 339.00 363.00 384.00 390.00 393.00 420.00 447.00 474.00 480.00 486.00 489.00 495.00 501.00 513.00 522.00 525.00 537.00

Lp (inch) 4.37 4.61 5.08 5.55 5.67 5.91 6.14 6.26 6.61 6.85 6.97 7.09 7.32 7.56 7.91 8.03 8.27 8.39 8.50 8.86 9.45 9.69 9.92 10.04 10.51 11.22 11.57 11.81 12.28 12.52 13.23 13.35 14.29 15.12 15.35 15.47 16.54 17.60 18.66 18.90 19.13 19.25 19.49 19.72 20.20 20.55 20.67 21.14

t

hs

(mm) 3 5 8 14

(mm) 2.40 3.60 5.60 10.00

ht (mm) 1.20 2.10 3.40 6.10

t (inch) 0.12 0.20 0.31 0.55

hs (inch) 0.09 0.14 0.22 0.39

ht (inch) 0.05 0.08 0.13 0.24

Size designation (example): HTD 960 - 8M - 50 CXP III 960 8M

960 mm (37.80 inch) pitch length 8 mm (0.31 inch) tooth pitch. section HTD 50 50 mm (1.97 inch) timing belt width CXP III version

Section 3M Section

z 37 39 43 47 48 50 52 53 56 58 59 60 62 64 67 68 70 71 72 75 80 82 84 85 89 95 98 100 104 106 112 113 121 128 130 131 140 149 158 160 162 163 165 167 171 174 175 179

1 1

*564 - 3M CXP III *570 - 3M CXP III *597 - 3M CXP III *600 - 3M CXP III *606 - 3M CXP III *612 - 3M CXP III *633 - 3M CXP III *669 - 3M CXP III *708 - 3M CXP III *711 - 3M CXP III *738 - 3M CXP III *753 - 3M CXP III *822 - 3M CXP III *843 - 3M CXP III *882 - 3M CXP III *945 - 3M CXP III *960 - 3M CXP III *1041 - 3M CXP III *1068 - 3M CXP III *1071 - 3M CXP III *1125 - 3M CXP III *1176 - 3M CXP III *1245 - 3M CXP III *1569 - 3M CXP III

Lp (mm) 564.00 570.00 597.00 600.00 606.00 612.00 633.00 669.00 708.00 711.00 738.00 753.00 822.00 843.00 882.00 945.00 960.00 1041.00 1068.00 1071.00 1125.00 1176.00 1245.00 1569.00

Lp (inch) 22.20 22.44 23.50 23.62 23.86 24.09 24.92 26.34 27.87 27.99 29.06 29.65 32.36 33.19 34.72 37.20 37.80 40.98 42.05 42.17 44.29 46.30 49.02 61.77

z 188 190 199 200 202 204 211 223 236 237 246 251 274 281 294 315 320 347 356 357 375 392 415 523

Standard widths for section 3M: 6(0.24), 9(0.35), 15(0.59) mm(inch) or in sleeves with a standard width of 480 mm / 18.90 inch

1

sleeve width 720 mm / 28.35 inch * Available on demand

Timing belts CONTI SYNCHROFORCE№Бе CXP III Heavy-duty timing belts HTD

Section 5M Section

1

1

225 - 5M CXP III 265 - 5M CXP III 275 - 5M CXP III 295 - 5M CXP III 300 - 5M CXP III 330 - 5M CXP III 350 - 5M CXP III 375 - 5M CXP III 400 - 5M CXP III 425 - 5M CXP III 450 - 5M CXP III 460 - 5M CXP III 475 - 5M CXP III 500 - 5M CXP III 525 - 5M CXP III 535 - 5M CXP III 550 - 5M CXP III 565 - 5M CXP III 600 - 5M CXP III 615 - 5M CXP III 620 - 5M CXP III 630 - 5M CXP III 635 - 5M CXP III 665 - 5M CXP III 700 - 5M CXP III 710 - 5M CXP III 740 - 5M CXP III 755 - 5M CXP III 800 - 5M CXP III 835 - 5M CXP III 840 - 5M CXP III 860 - 5M CXP III 890 - 5M CXP III 900 - 5M CXP III 925 - 5M CXP III *950 - 5M CXP III 1000 - 5M CXP III 1050 - 5M CXP III 1125 - 5M CXP III 1200 - 5M CXP III 1270 - 5M CXP III 1500 - 5M CXP III 1595 - 5M CXP III 1690 - 5M CXP III 1790 - 5M CXP III 1800 - 5M CXP III 1870 - 5M CXP III 2000 - 5M CXP III 2525 - 5M CXP III

Lp (mm) 225.00 265.00 275.00 295.00 300.00 330.00 350.00 375.00 400.00 425.00 450.00 460.00 475.00 500.00 525.00 535.00 550.00 565.00 600.00 615.00 620.00 630.00 635.00 665.00 700.00 710.00 740.00 755.00 800.00 835.00 840.00 860.00 890.00 900.00 925.00 950.00 1000.00 1050.00 1125.00 1200.00 1270.00 1500.00 1595.00 1690.00 1790.00 1800.00 1870.00 2000.00 2525.00

Lp (inch) 8.86 10.43 10.83 11.61 11.81 12.99 13.78 14.76 15.75 16.73 17.72 18.11 18.70 19.69 20.67 21.06 21.65 22.24 23.62 24.21 24.41 24.80 25.00 26.18 27.56 27.95 29.13 29.72 31.50 32.87 33.08 33.87 35.04 35.43 36.42 37.40 39.37 41.34 44.29 47.24 50.00 59.06 62.82 66.56 70.50 70.89 73.65 78.77 99.44

Section 8M Section

z 45 53 55 59 60 66 70 75 80 85 90 92 95 100 105 107 110 113 120 123 124 126 127 133 140 142 148 151 160 167 168 172 178 180 185 190 200 210 225 240 254 300 319 338 358 360 374 400 505

Standard widths for section 5M: 9(0.35), 15(0.59), 25(0.98) mm(inch) or in sleeves with a standard width of 480 mm / 18.90 inch

1

sleeve width 720 mm / 28.35 inch

Lp (mm)

288 - 8M CXP III 304 - 8M CXP III 352 - 8M CXP III 376 - 8M CXP III 416 - 8M CXP III 424 - 8M CXP III 472 - 8M CXP III 480 - 8M CXP III 560 - 8M CXP III 600 - 8M CXP III 624 - 8M CXP III 640 - 8M CXP III 656 - 8M CXP III 720 - 8M CXP III 776 - 8M CXP III 784 - 8M CXP III 800 - 8M CXP III 880 - 8M CXP III 912 - 8M CXP III 920 - 8M CXP III 960 - 8M CXP III 1040 - 8M CXP III 1120 - 8M CXP III 1200 - 8M CXP III 1280 - 8M CXP III 1304 - 8M CXP III 1328 - 8M CXP III 1360 - 8M CXP III 1424 - 8M CXP III 1440 - 8M CXP III 1600 - 8M CXP III 1760 - 8M CXP III 1800 - 8M CXP III 2000 - 8M CXP III 2248 - 8M CXP III 2400 - 8M CXP III 2800 - 8M CXP III *3008 - 8M CXP III *3408 - 8M CXP III *3808 - 8M CXP III

288.00 304.00 352.00 376.00 416.00 424.00 472.00 480.00 560.00 600.00 624.00 640.00 656.00 720.00 776.00 784.00 800.00 880.00 912.00 920.00 960.00 1040.00 1120.00 1200.00 1280.00 1304.00 1328.00 1360.00 1424.00 1440.00 1600.00 1760.00 1800.00 2000.00 2248.00 2400.00 2800.00 3008.00 3408.00 3808.00

Lp (inch) 11.34 11.97 13.86 14.80 16.38 16.69 18.58 18.90 22.05 23.62 24.57 25.20 25.83 28.35 30.55 30.87 31.50 34.65 35.91 36.22 37.80 40.94 44.09 47.24 50.39 51.34 52.28 53.54 56.06 56.69 62.99 69.29 70.87 78.74 88.50 94.49 110.24 118.43 134.17 149.92

z 36 38 44 47 52 53 59 60 70 75 78 80 82 90 97 98 100 110 114 115 120 130 140 150 160 163 166 170 178 180 200 220 225 250 281 300 350 376 426 476

Standard widths for section 8M: 20(0.79), 30(1.18), 50(1.97), 85(3.35) mm(inch) ) or in sleeves with a standard width of 480 mm / 18.90 inch

Section 14M Section

Lp (mm)

Lp (inch)

z

966 - 14M CXP III 1190 - 14M CXP III 1400 - 14M CXP III 1610 - 14M CXP III 1778 - 14M CXP III 1890 - 14M CXP III 2100 - 14M CXP III 2310 - 14M CXP III 2450 - 14M CXP III 2590 - 14M CXP III 2800 - 14M CXP III 3150 - 14M CXP III 3500 - 14M CXP III 3850 - 14M CXP III 4326 - 14M CXP III 4578 - 14M CXP III

966.00 1190.00 1400.00 1610.00 1778.00 1890.00 2100.00 2310.00 2450.00 2590.00 2800.00 3150.00 3500.00 3850.00 4326.00 4578.00

38.03 46.85 55.12 63.39 70.00 74.41 82.68 90.94 96.46 101.97 110.24 124.02 137.80 151.57 170.31 180.24

69 85 100 115 127 135 150 165 175 185 200 225 250 275 309 327

Standard widths for section 8M: 40(1.57), 55(2.17), 85(3.35), 115(4.53), 170(6.69) mm(inch) or in sleeves with a standard width of 470 mm /18.51 inch

5

Timing belts

CONTI SYNCHROFORCE® CXP III Heavy-duty timing belts STD

Features – Moderately oil-resistant – Resistant to temperatures from –20 °C up to +100 °C (depending on application) – Non-ageing and ozone-resistant – Suitable for tropical climates – Electrically conductive (antistatic) to ISO 9563

Section S8M Section S8M

t (mm) 8

hs (mm) 5.30

ht (mm) 2.95

Size designation (example):

t (inch) 0.31

hs (inch) 0.21

ht (inch) 0.12

960 8M

STD 960 - S8M - 50 CXP III 960 mm (37.80 inch) pitch length 8 mm (0.31 inch) tooth pitch, section STD 50 50 mm (1.97 inch) timing belt width CXP III version

z: number of teeth Section S8M Section 440 - S8M CXP III 480 - S8M CXP III 528 - S8M CXP III 560 - S8M CXP III 600 - S8M CXP III 632 - S8M CXP III 640 - S8M CXP III 656 - S8M CXP III 672 - S8M CXP III 688 - S8M CXP III 696 - S8M CXP III 712 - S8M CXP III 720 - S8M CXP III 728 - S8M CXP III 736 - S8M CXP III 760 - S8M CXP III 768 - S8M CXP III 784 - S8M CXP III 792 - S8M CXP III 800 - S8M CXP III 824 - S8M CXP III 848 - S8M CXP III 864 - S8M CXP III 880 - S8M CXP III 912 - S8M CXP III 920 - S8M CXP III 944 - S8M CXP III 960 - S8M CXP III 992 - S8M CXP III 1000 - S8M CXP III 1056 - S8M CXP III 1064 - S8M CXP III 1072 - S8M CXP III 1120 - S8M CXP III 1136 - S8M CXP III 1160 - S8M CXP III 1168 - S8M CXP III 1176 - S8M CXP III 1184 - S8M CXP III 1200 - S8M CXP III 1216 - S8M CXP III 1240 - S8M CXP III 1256 - S8M CXP III 1264 - S8M CXP III 1280 - S8M CXP III 1296 - S8M CXP III 1304 - S8M CXP III 1312 - S8M CXP III

6

Lp (mm) 440.00 480.00 528.00 560.00 600.00 632.00 640.00 656.00 672.00 688.00 696.00 712.00 720.00 728.00 736.00 760.00 768.00 784.00 792.00 800.00 824.00 848.00 864.00 880.00 912.00 920.00 944.00 960.00 992.00 1000.00 1056.00 1064.00 1072.00 1120.00 1136.00 1160.00 1168.00 1176.00 1184.00 1200.00 1216.00 1240.00 1256.00 1264.00 1280.00 1296.00 1304.00 1312.00

Lp (inch) 17.32 18.90 20.79 22.05 23.62 24.88 25.20 25.83 26.46 27.09 27.40 28.03 28.35 28.66 28.98 29.92 30.24 30.87 31.18 31.50 32.44 33.39 34.02 34.65 35.91 36.22 37.17 37.80 39.06 39.37 41.57 41.89 42.20 44.09 44.72 45.67 45.98 46.30 46.61 47.24 47.87 48.82 49.45 49.76 50.39 51.02 51.34 51.65

Section S8M Section

z 55 60 66 70 75 79 80 82 84 86 87 89 90 91 92 95 96 98 99 100 103 106 108 110 114 115 118 120 124 125 132 133 134 140 142 145 146 147 148 150 152 155 157 158 160 162 163 164

1344 - S8M CXP III 1368 - S8M CXP III 1400 - S8M CXP III 1408 - S8M CXP III 1440 - S8M CXP III 1480 - S8M CXP III 1512 - S8M CXP III 1552 - S8M CXP III 1600 - S8M CXP III 1624 - S8M CXP III 1760 - S8M CXP III 1776 - S8M CXP III 1800 - S8M CXP III 1816 - S8M CXP III 1912 - S8M CXP III 2240 - S8M CXP III 2392 - S8M CXP III 2800 - S8M CXP III 2848 - S8M CXP III

Lp (mm) 1344.00 1368.00 1400.00 1408.00 1440.00 1480.00 1512.00 1552.00 1600.00 1624.00 1760.00 1776.00 1800.00 1816.00 1912.00 2240.00 2392.00 2800.00 2848.00

Lp (inch)

z

52.91 53.86 55.12 55.43 56.69 58.27 59.53 61.10 62.99 63.94 69.29 69.92 70.87 71.50 75.28 88.19 94.17 110.24 112.13

Standard widths for section S8M: 20(0.79), 30(1.18), 50(1.97), 85(3.35) mm(inch) or in sleeves with a standard width of 480 mm / 18.90 inch

168 171 175 176 180 185 189 194 200 203 220 222 225 227 239 280 299 350 356

Timing belts

CONTI SYNCHROFORCE CXA III Heavy-duty timing belts HTD

Features – Moderately oil-resistant – Resistant to temperatures from –20 °C up to +100 °C (depending on application) – Non-ageing and ozone-resistant – Suitable for tropical climates – Electrically conductive (antistatic) to ISO 9563

Section 8M 14M Section 8M 14M

t (mm) 8 14

hs (mm) 5.60 10.00

ht (mm) 3.40 6.10

t

hs

(inch) 0.31 0.55

(inch) 0.22 0.39

ht (inch) 0.13 0.24

Size designation (example): HTD 960 - 8M - 50 CXA III 960 8M

960 mm (37.80 inch) pitch length 8 mm (0.31 inch) tooth pitch, section HTD 50 50 mm (1.97 inch) timing belt width CXA III version

z: number of teeth Section 8M Section *288 - 8M CXA III *304 - 8M CXA III *352 - 8M CXA III 376 - 8M CXA III *416 - 8M CXA III *424 - 8M CXA III 472 - 8M CXA III 480 - 8M CXA III 560 - 8M CXA III 600 - 8M CXA III 624 - 8M CXA III 640 - 8M CXA III 656 - 8M CXA III 720 - 8M CXA III 776 - 8M CXA III 784 - 8M CXA III 800 - 8M CXA III 880 - 8M CXA III 912 - 8M CXA III 920 - 8M CXA III 960 - 8M CXA III 1040 - 8M CXA III 1120 - 8M CXA III 1200 - 8M CXA III 1280 - 8M CXA III 1304 - 8M CXA III 1328 - 8M CXA III 1360 - 8M CXA III 1424 - 8M CXA III 1440 - 8M CXA III 1600 - 8M CXA III 1760 - 8M CXA III 1800 - 8M CXA III 2000 - 8M CXA III 2248 - 8M CXA III 2400 - 8M CXA III 2800 - 8M CXA III *3008 - 8M CXA III *3408 - 8M CXA III *3808 - 8M CXA III

Lp (mm) 288.00 304.00 352.00 376.00 416.00 424.00 472.00 480.00 560.00 600.00 624.00 640.00 656.00 720.00 776.00 784.00 800.00 880.00 912.00 920.00 960.00 1040.00 1120.00 1200.00 1280.00 1304.00 1328.00 1360.00 1424.00 1440.00 1600.00 1760.00 1800.00 2000.00 2248.00 2400.00 2800.00 3008.00 3408.00 3808.00

Lp (inch) 11.34 11.97 13.86 14.80 16.38 16.69 18.58 18.90 22.05 23.62 24.57 25.20 25.83 28.35 30.55 30.87 31.50 34.65 35.91 36.22 37.80 40.94 44.09 47.24 50.39 51.34 52.28 53.54 56.06 56.69 62.99 69.29 70.87 78.74 88.50 94.49 110.24 118.43 134.17 149.92

Section 14M Section

z 36 38 44 47 52 53 59 60 70 75 78 80 82 90 97 98 100 110 114 115 120 130 140 150 160 163 166 170 178 180 200 220 225 250 281 300 350 376 426 476

966 - 14M CXA III 1190 - 14M CXA III 1400 - 14M CXA III 1610 - 14M CXA III 1778 - 14M CXA III 1890 - 14M CXA III 2100 - 14M CXA III 2310 - 14M CXA III 2450 - 14M CXA III 2590 - 14M CXA III 2800 - 14M CXA III 3150 - 14M CXA III 3500 - 14M CXA III 3850 - 14M CXA III 4326 - 14M CXA III 4578 - 14M CXA III

Lp (mm) 966.00 1190.00 1400.00 1610.00 1778.00 1890.00 2100.00 2310.00 2450.00 2590.00 2800.00 3150.00 3500.00 3850.00 4326.00 4578.00

Lp (inch) 38.03 46.85 55.12 63.39 70.00 74.41 82.68 90.94 96.46 101.97 110.24 124.02 137.80 151.57 170.31 180.24

z 69 85 100 115 127 135 150 165 175 185 200 225 250 275 309 327

Standard widths for section 14M: 40(1.57), 55(2.17), 85(3.35), 115(4.53), 170(6.69) mm(inch) or in sleeves with a standard width of 470 mm / 18.51 inch

Standard widths for section 8M: 20(0.79), 30(1.18), 50(1.97), 85(3.35) mm(inch) or in sleeves with a standard width of 480 mm / 18.90 inch

* Available on demand

7

Timing belts

CONTI SYNCHROFORCE® CXA III Heavy-duty timing belts STD

Features – Moderately oil-resistant – Resistant to temperatures from –20 °C up to +100 °C (depending on application) – Non-ageing and ozone-resistant – Suitable for tropical climates – Electrically conductive (antistatic) to ISO 9563

Section S8M Section S8M

t (mm) 8

hs (mm) 5.30

ht (mm) 2.95

Size designation (example):

t (inch) 0.31

hs (inch) 0.21

ht (inch) 0.12

960 8M

STD 960 - S8M - 50 CXA III 960 mm (37.80 inch) pitch length 8 mm (0.31 inch) tooth pitch, section STD 50 50 mm (1.97 inch) timing belt width CXA III version

z: number of teeth Section S8M Section *440 - S8M CXA III *480 - S8M CXA III *528 - S8M CXA III *560 - S8M CXA III *600 - S8M CXA III *632 - S8M CXA III *640 - S8M CXA III *656 - S8M CXA III *672 - S8M CXA III *688 - S8M CXA III *696 - S8M CXA III *712 - S8M CXA III *720 - S8M CXA III *728 - S8M CXA III *736 - S8M CXA III *760 - S8M CXA III *768 - S8M CXA III *784 - S8M CXA III *792 - S8M CXA III *800 - S8M CXA III *824 - S8M CXA III *848 - S8M CXA III *864 - S8M CXA III *880 - S8M CXA III *912 - S8M CXA III *920 - S8M CXA III *944 - S8M CXA III *960 - S8M CXA III *992 - S8M CXA III *1000 - S8M CXA III *1056 - S8M CXA III *1064 - S8M CXA III *1072 - S8M CXA III *1120 - S8M CXA III *1136 - S8M CXA III *1160 - S8M CXA III *1168 - S8M CXA III *1176 - S8M CXA III *1184 - S8M CXA III *1200 - S8M CXA III *1216 - S8M CXA III *1240 - S8M CXA III *1256 - S8M CXA III *1264 - S8M CXA III *1280 - S8M CXA III *1296 - S8M CXA III *1304 - S8M CXA III *1312 - S8M CXA III

8

Lp (mm) 440.00 480.00 528.00 560.00 600.00 632.00 640.00 656.00 672.00 688.00 696.00 712.00 720.00 728.00 736.00 760.00 768.00 784.00 792.00 800.00 824.00 848.00 864.00 880.00 912.00 920.00 944.00 960.00 992.00 1000.00 1056.00 1064.00 1072.00 1120.00 1136.00 1160.00 1168.00 1176.00 1184.00 1200.00 1216.00 1240.00 1256.00 1264.00 1280.00 1296.00 1304.00 1312.00

Lp (inch) 17.32 18.90 20.79 22.05 23.62 24.88 25.20 25.83 26.46 27.09 27.40 28.03 28.35 28.66 28.98 29.92 30.24 30.87 31.18 31.50 32.44 33.39 34.02 34.65 35.91 36.22 37.17 37.80 39.06 39.37 41.57 41.89 42.20 44.09 44.72 45.67 45.98 46.30 46.61 47.24 47.87 48.82 49.45 49.76 50.39 51.02 51.34 51.65

Section S8M Section

z 55 60 66 70 75 79 80 82 84 86 87 89 90 91 92 95 96 98 99 100 103 106 108 110 114 115 118 120 124 125 132 133 134 140 142 145 146 147 148 150 152 155 157 158 160 162 163 164

*1344 - S8M CXP III *1368 - S8M CXP III *1400 - S8M CXP III *1408 - S8M CXP III *1440 - S8M CXP III *1480 - S8M CXP III *1512 - S8M CXP III *1552 - S8M CXP III *1600 - S8M CXP III *1624 - S8M CXP III *1760 - S8M CXP III *1776 - S8M CXP III *1800 - S8M CXP III *1816 - S8M CXP III *1912 - S8M CXP III *2240 - S8M CXP III *2392 - S8M CXP III *2800 - S8M CXP III *2848 - S8M CXP III

Lp (mm) 1344.00 1368.00 1400.00 1408.00 1440.00 1480.00 1512.00 1552.00 1600.00 1624.00 1760.00 1776.00 1800.00 1816.00 1912.00 2240.00 2392.00 2800.00 2848.00

Lp (inch) 52.91 53.86 55.12 55.43 56.69 58.27 59.53 61.10 62.99 63.94 69.29 69.92 70.87 71.50 75.28 88.19 94.17 110.24 112.13

z 168 171 175 176 180 185 189 194 200 203 220 222 225 227 239 280 299 350 356

Standard widths for section S8M: 20(0.79), 30(1.18), 50(1.97), 85(3.35) mm(inch) or in sleeves with a standard width of 480 mm / 18.90 inch

* Available on demand

Timing belts

CONTI SYNCHROBELT® Timing belts, DIN 5296

Section Features – Moderately oil-resistant MXL – Resistant to temperatures XL from –20 °C up to +100 °C L (depending on application) – Non-ageing and ozone-resistant H XH – Suitable for tropical climates

t (mm) 2.032 5.08 9.525 12.7 22.225

t (inch) 0.08 0.2 0.375 0.5 0.875

hs (mm) 1.14 2.30 3.60 4.30 11.20

hs (inch) 0.04 0.09 0.14 0.17 0.44

ht (mm) 0.51 1.27 1.91 2.29 6.35

ht (inch) 0.02 0.05 0.08 0.09 0.25

Size designation (example): 300 L 075 300 L 075

30 inch (762.0 mm) pitch length 3/8 inch (9.525 mm) tooth pitch 0.75 inch (19.05 mm) timing belt width

z: number of teeth Section MXL Section

1

*43.2 MXL 44.0 MXL 44.8 MXL 46.4 MXL 48.0 MXL *48.8 MXL *50.4 MXL 54.4 MXL 56.0 MXL 56.8 MXL 57.6 MXL 60.0 MXL 61.6 MXL 64.0 MXL *65.6 MXL 67.2 MXL *68.0 MXL 69.6 MXL 70.4 MXL 72.0 MXL 75.2 MXL 76.0 MXL 77.6 MXL 80.0 MXL 80.8 MXL 82.4 MXL *84.0 MXL 84.8 MXL 88.0 MXL 89.6 MXL 90.4 MXL 91.2 MXL 94.4 MXL 96.0 MXL 97.6 MXL 98.4 MXL 100.0 MXL 100.8 MXL *105.6 MXL 112.0 MXL 120.0 MXL *124.0 MXL 131.2 MXL *132.0 MXL 132.8 MXL 136.0 MXL 140.0 MXL 144.0 MXL

Lp (mm) 109.73 111.76 113.79 117.86 121.92 123.95 128.02 138.18 142.24 144.27 146.30 152.40 156.46 162.56 166.62 170.69 172.72 176.78 178.82 182.88 191.01 193.04 197.10 203.20 205.23 209.30 213.36 215.39 223.52 227.58 229.62 231.65 239.78 243.84 247.90 249.94 254.00 256.03 268.22 284.48 304.80 314.96 333.25 335.28 337.31 345.44 355.60 365.76

Lp (inch) 4.32 4.40 4.48 4.64 4.80 4.88 5.04 5.44 5.60 5.68 5.76 6.00 6.16 6.40 6.56 6.72 6.80 6.96 7.04 7.20 7.52 7.60 7.76 8.00 8.08 8.24 8.40 8.48 8.80 8.96 9.04 9.12 9.44 9.60 9.76 9.84 10.00 10.08 10.56 11.20 12.00 12.40 13.12 13.20 13.28 13.60 14.00 14.40

Section MXL Section

z 54 55 56 58 60 61 63 68 70 71 72 75 77 80 82 84 85 87 88 90 94 95 97 100 101 103 105 106 110 112 113 114 118 120 122 123 125 126 132 140 150 155 164 165 166 170 175 180

147.2 MXL *180.0 MXL 188.8 MXL *200.8 MXL *238.4 MXL 277.6 MXL *292.0 MXL *296.8 MXL *297.6 MXL *320.0 MXL *329.6 MXL *347.2 MXL *362.4 MXL *370.4 MXL *398.4 MXL *402.4 MXL *404.0 MXL

Lp (mm) 373.89 457.20 479.55 510.03 605.54 705.10 741.68 753.87 755.90 812.80 837.18 881.89 920.50 940.82 1011.94 1022.10 1026.16

Lp (inch) 14.72 18.00 18.88 20.08 23.84 27.76 29.20 29.68 29.76 32.00 32.96 34.72 36.24 37.04 39.84 40.24 40.40

z 184 225 236 251 298 347 365 371 372 400 412 434 453 463 498 503 505

Standard widths for section MXL: 012 (width 3.18/0.13) 019 (width 4.76/0.19) 025 (width 6.35/0.25) (mm/inch) or in sleeves with a standard width of 480 mm / 18.90 inch

1

sleeve width 720 mm / 28.35 inch * Available on demand

9

Timing belts CONTI SYNCHROBELT№Бе Timing belts, DIN 5296

Section XL Section

1

1

1

10

Lp (mm) 60 XL 70 XL *76 XL 80 XL *86 XL 90 XL *92 XL *94 XL 96 XL 100 XL 102 XL 106 XL *108 XL 110 XL *112 XL *114 XL *116 XL *118 XL 120 XL *124 XL *126 XL 130 XL *134 XL *136 XL *138 XL 140 XL *148 XL 150 XL *156 XL 160 XL *162 XL *166 XL *168 XL 170 XL *174 XL *176 XL *178 XL 180 XL *182 XL *184 XL *188 XL 190 XL *196 XL *198 XL 200 XL 210 XL 220 XL 230 XL *232 XL 240 XL 244 XL *248 XL 250 XL 260 XL 270 XL *272 XL *274 XL *280 XL *286 XL *290 XL *296 XL 300 XL *306 XL 316 XL *322 XL 330 XL *340 XL

152.40 177.80 193.04 203.20 218.44 228.60 233.68 238.76 243.84 254.00 259.08 269.24 274.32 279.40 284.48 289.56 294.64 299.72 304.80 314.96 320.04 330.20 340.36 345.44 350.52 355.60 375.92 381.00 396.24 406.40 411.48 421.64 426.72 431.80 441.96 447.04 452.12 457.20 462.28 467.36 477.52 482.60 497.84 502.92 508.00 533.40 558.80 584.20 589.28 609.60 619.76 629.92 635.00 660.40 685.80 690.88 695.96 711.20 726.44 736.60 751.84 762.00 777.24 802.64 817.88 838.20 863.60

Lp (inch) 6.00 7.00 7.60 8.00 8.60 9.00 9.20 9.40 9.60 10.00 10.20 10.60 10.80 11.00 11.20 11.40 11.60 11.80 12.00 12.40 12.60 13.00 13.40 13.60 13.80 14.00 14.80 15.00 15.60 16.00 16.20 16.60 16.80 17.00 17.40 17.60 17.80 18.00 18.20 18.40 18.80 19.00 19.60 19.80 20.00 21.00 22.00 23.00 23.20 24.00 24.40 24.80 25.00 26.00 27.00 27.20 27.40 28.00 28.60 29.00 29.60 30.00 30.60 31.60 32.20 33.00 34.00

Section XL Section

z 30 35 38 40 43 45 46 47 48 50 51 53 54 55 56 57 58 59 60 62 63 65 67 68 69 70 74 75 78 80 81 83 84 85 87 88 89 90 91 92 94 95 98 99 100 105 110 115 116 120 122 124 125 130 135 136 137 140 143 145 148 150 153 158 161 165 170

Lp (mm) 344 XL *350 XL 380 XL *382 XL *388 XL *392 XL *412 XL *414 XL *438 XL *460 XL *498 XL *506 XL *514 XL *580 XL *630 XL

873.76 889.00 965.20 970.28 985.52 995.68 1046.48 1051.56 1112.52 1168.40 1264.92 1285.24 1305.56 1473.20 1600.20

Lp (inch)

z

34.40 35.00 38.00 38.20 38.80 39.20 41.20 41.40 43.80 46.00 49.80 50.60 51.40 58.00 63.00

172 175 190 191 194 196 206 207 219 230 249 253 257 290 315

Standard widths for section XL: 025 (width 6.35/0.25) 031 (width 7.94/0.31) 037 (width 9.53/0.38) (mm/inch) or in sleeves with a standard width of 480 mm / 18.90 inch

Section L Section

Lp (mm) 124 L 150 L 187 L 210 L 225 L *236 L 240 L *244 L 255 L 270 L 285 L 300 L 322 L 345 L 367 L 390 L 420 L 450 L *454 L 480 L 510 L 540 L 600 L

314.96 381.00 476.25 533.40 571.50 600.08 609.60 619.13 647.70 685.80 723.90 762.00 819.15 876.30 933.45 990.60 1066.80 1143.00 1152.53 1219.20 1295.40 1371.60 1524.00

Lp (inch) 12.40 15.00 18.75 21.00 22.50 23.63 24.00 24.38 25.50 27.00 28.50 30.00 32.25 34.50 36.75 39.00 42.00 45.00 45.38 48.00 51.00 54.00 60.00

z 33 40 50 56 60 63 64 65 68 72 76 80 86 92 98 104 112 120 121 128 136 144 160

Standard widths for section L: 050 (width 12.70/0.50) 075 (width 19.05/ 0.75) 100 (width 25.40/1.00) (mm/inch) or in sleeves with a standard width of 480 mm / 18.90 inch

1

sleeve width 720 mm / 28.35 inch * Available on demand

Timing belts CONTI SYNCHROBELT Timing belts, DIN 5296

Section H Section

Lp (mm) 240 H 255 H 270 H 300 H 330 H *335 H 360 H *370 H 390 H 420 H 450 H 480 H 510 H 540 H 570 H 600 H 630 H 660 H 700 H *730 H 750 H 800 H 850 H 900 H 1000 H 1100 H 1250 H 1400 H 1700 H

609.60 647.70 685.80 762.00 838.20 850.90 914.40 939.80 990.60 1066.80 1143.00 1219.20 1295.40 1371.60 1447.80 1524.00 1600.20 1676.40 1778.00 1854.20 1905.00 2032.00 2159.00 2286.00 2540.00 2794.00 3175.00 3556.00 4318.00

Lp (inch)

z

24.00 25.50 27.00 30.00 33.00 33.50 36.00 37.00 39.00 42.00 45.00 48.00 51.00 54.00 57.00 60.00 63.00 66.00 70.00 73.00 75.00 80.00 85.00 90.00 100.00 110.00 125.00 140.00 170.00

48 51 54 60 66 67 72 74 78 84 90 96 102 108 114 120 126 132 140 146 150 160 170 180 200 220 250 280 340

Standard widths for section H: 075 (width 19.05/0.75)100 (width 25.40/1.00) 150 (width 38.10/1.50) 200 (width 50.80/2.00) 300 (width 76.20/3.00) (mm/inch) or in sleeves with a standard width of 480 mm / 18.90 inch Section XH Section

Lp (mm) 507 XH *534 XH 560 XH 630 XH 700 XH 770 XH 840 XH 980 XH 1120 XH 1260 XH 1400 XH 1540 XH 1750 XH

1289.05 1356.36 1422.40 1600.20 1778.00 1955.80 2133.60 2489.20 2844.80 3200.40 3556.00 3911.60 4445.00

Lp (inch) 50.75 53.40 56.00 63.00 70.00 77.00 84.00 98.00 112.00 126.00 140.00 154.00 175.00

z 58 61 64 72 80 88 96 112 128 144 160 176 200

Standard widths for section XH: 200 (width 50.80/2.00) 300 (width 76.20/3.00) 400 (width 101.60/4.00) 500 (width 127.00/5.00) (mm/inch) or in sleeves with a standard width of 460 mm / 18.11 inch

* Available on demand

11

Timing belts

CONTI SYNCHROBELT® Timing belts HTD

Features – Moderately oil-resistant – Resistant to temperatures from –20 °C up to +100 °C (depending on application) – Non-ageing and ozone-resistant – Suitable for tropical climates

Section 3M 5M 8M 14M Section 3M 5M 8M 14M

z: number of teeth Section 3M Section

1

1 1

1 1

1

1

1

1

Lp (mm) 111 - 3M *117 - 3M 129 - 3M *141 - 3M 144 - 3M 150 - 3M *156 - 3M 159 - 3M 168 - 3M 174 - 3M 177 - 3M *180 - 3M *186 - 3M *192 - 3M 201 - 3M *204 - 3M 210 - 3M 213 - 3M 216 - 3M 225 - 3M 240 - 3M *246 - 3M 252 - 3M 255 - 3M 267 - 3M *285 - 3M *294 - 3M 300 - 3M 312 - 3M 318 - 3M 336 - 3M 339 - 3M 363 - 3M 384 - 3M 390 - 3M 393 - 3M 420 - 3M 447 - 3M 474 - 3M 480 - 3M *486 - 3M *489 - 3M *495 - 3M 501 - 3M 513 - 3M 522 - 3M 525 - 3M 537 - 3M

111.00 117.00 129.00 141.00 144.00 150.00 156.00 159.00 168.00 174.00 177.00 180.00 186.00 192.00 201.00 204.00 210.00 213.00 216.00 225.00 240.00 246.00 252.00 255.00 267.00 285.00 294.00 300.00 312.00 318.00 336.00 339.00 363.00 384.00 390.00 393.00 420.00 447.00 474.00 480.00 486.00 489.00 495.00 501.00 513.00 522.00 525.00 537.00

sleeve width 720 mm / 28.35 inch

12

t (mm) 3 5 8 14

Lp (inch)

hs (mm) 2.40 3.60 5.60 10.00

ht (mm) 1.20 2.10 3.40 6.10

t

hs

(inch) 0.12 0.20 0.31 0.55

(inch) 0.09 0.14 0.22 0.39

ht (inch) 0.05 0.08 0.13 0.24

*Available on demand

HTD 960 - 8M - 50 960 8M 50

Section 3M Section

z

4.37 4.61 5.08 5.55 5.67 5.91 6.14 6.26 6.61 6.85 6.97 7.09 7.32 7.56 7.91 8.03 8.27 8.39 8.50 8.86 9.45 9.69 9.92 10.04 10.51 11.22 11.57 11.81 12.28 12.52 13.23 13.35 14.29 15.12 15.35 15.47 16.54 17.60 18.66 18.90 19.13 19.25 19.49 19.72 20.20 20.55 20.67 21.14

Size designation (example):

37 39 43 47 48 50 52 53 56 58 59 60 62 64 67 68 70 71 72 75 80 82 84 85 89 95 98 100 104 106 112 113 121 128 130 131 140 149 158 160 162 163 165 167 171 174 175 179

1 1

1

960 mm (37.80 inch) pitch length 8 mm (0.31 inch) tooth pitch, section HTD 50 mm (1.97 inch) timing belt width

Lp (mm ) 564 - 3M 570 - 3M *597 - 3M *600 - 3M 606 - 3M *612 - 3M 633 - 3M 669 - 3M 708 - 3M 711 - 3M *738 - 3M *753 - 3M 822 - 3M *843 - 3M 882 - 3M 945 - 3M *960 - 3M 1041 - 3M 1068 - 3M 1071 - 3M 1125 - 3M *1176 - 3M 1245 - 3M 1569 - 3M

564.00 570.00 597.00 600.00 606.00 612.00 633.00 669.00 708.00 711.00 738.00 753.00 822.00 843.00 882.00 945.00 960.00 1041.00 1068.00 1071.00 1125.00 1176.00 1245.00 1569.00

Lp (inch)

z

22.20 22.44 23.50 23.62 23.86 24.09 24.92 26.34 27.87 27.99 29.06 29.65 32.36 33.19 34.72 37.20 37.80 40.98 42.05 42.17 44.29 46.30 49.02 61.77

188 190 199 200 202 204 211 223 236 237 246 251 274 281 294 315 320 347 356 357 375 392 415 523

Standard widths for section 3M: 6(0.24), 9(0.35), 15(0.59) mm (inch) or in sleeves with a standard width of 480 mm / 18.90 inch Section 5M Section

1

1

Lp (mm) *225 - 5M *265 - 5M 275 - 5M *295 - 5M 300 - 5M 330 - 5M 350 - 5M 375 - 5M 400 - 5M 425 - 5M 450 - 5M 460 - 5M 475 - 5M 500 - 5M *525 - 5M 535 - 5M 550 - 5M 565 - 5M

225.00 265.00 275.00 295.00 300.00 330.00 350.00 375.00 400.00 425.00 450.00 460.00 475.00 500.00 525.00 535.00 550.00 565.00

Lp (inch) 8.86 10.43 10.83 11.61 11.81 12.99 13.78 14.76 15.75 16.73 17.72 18.11 18.70 19.69 20.67 21.06 21.65 22.24

z 45 53 55 59 60 66 70 75 80 85 90 92 95 100 105 107 110 113

Timing belts CONTI SYNCHROBELT Timing belts HTD

Section 5M Section

Lp (mm) 600 - 5M 615 - 5M 620 - 5M 630 - 5M 635 - 5M 665 - 5M 700 - 5M 710 - 5M 740 - 5M 755 - 5M 800 - 5M 835 - 5M 840 - 5M 860 - 5M 890 - 5M 900 - 5M 925 - 5M 950 - 5M 1000 - 5M 1050 - 5M 1125 - 5M 1200 - 5M 1270 - 5M 1420 - 5M 1500 - 5M 1595 - 5M 1690 - 5M 1800 - 5M 1870 - 5M 2000 - 5M 2525 - 5M

Lp (inch)

600.00 615.00 620.00 630.00 635.00 665.00 700.00 710.00 740.00 755.00 800.00 835.00 840.00 860.00 890.00 900.00 925.00 950.00 1000.00 1050.00 1125.00 1200.00 1270.00 1420.00 1500.00 1595.00 1690.00 1800.00 1870.00 2000.00 2525.00

Section 8M Section

z

23.62 24.21 24.41 24.80 25.00 26.18 27.56 27.95 29.13 29.72 31.50 32.87 33.08 33.87 35.04 35.43 36.42 37.40 39.37 41.34 44.29 47.24 50.00 55.91 59.06 62.82 66.56 70.89 73.65 78.77 99.44

120 123 124 126 127 133 140 142 148 151 160 167 168 172 178 180 185 190 200 210 225 240 254 284 300 319 338 360 374 400 505

Standard widths for section 5M: 9(0.35), 15(0.59), 25(0.98) mm (inch) or in sleeves with a standard width of 480 mm / 18.90 inch Section 8M Section

Lp (mm) 288 - 8M 304 - 8M 352 - 8M 376 - 8M 416 - 8M 424 - 8M *472 - 8M 480 - 8M 560 - 8M 600 - 8M *624 - 8M 640 - 8M 656 - 8M 720 - 8M *776 - 8M 784 - 8M 800 - 8M 880 - 8M *912 - 8M 920 - 8M 960 - 8M 1040 - 8M 1120 - 8M 1200 - 8M 1280 - 8M 1304 - 8M *1328 - 8M 1360 - 8M 1424 - 8M 1440 - 8M

2

Lp (inch)

288.00 304.00 352.00 376.00 416.00 424.00 472.00 480.00 560.00 600.00 624.00 640.00 656.00 720.00 776.00 784.00 800.00 880.00 912.00 920.00 960.00 1040.00 1120.00 1200.00 1280.00 1304.00 1328.00 1360.00 1424.00 1440.00

sleeve width 400 mm / 15.75 inch

11.34 11.97 13.86 14.80 16.38 16.69 18.58 18.90 22.05 23.62 24.57 25.20 25.83 28.35 30.55 30.87 31.50 34.65 35.91 36.22 37.80 40.94 44.09 47.24 50.39 51.34 52.28 53.54 56.06 56.69

z 36 38 44 47 52 53 59 60 70 75 78 80 82 90 97 98 100 110 114 115 120 130 140 150 160 163 166 170 178 180

2

2 2

2

2

Lp (mm) 1600 - 8M 1760 - 8M 1800 - 8M 2000 - 8M 2248 - 8M 2400 - 8M *2600 - 8M 2800 - 8M *3008 - 8M *3048 - 8M *3280 - 8M *3408 - 8M *3600 - 8M *3808 - 8M *4400 - 8M

1600.00 1760.00 1800.00 2000.00 2248.00 2400.00 2600.00 2800.00 3008.00 3048.00 3280.00 3408.00 3600.00 3808.00 4400.00

Lp (inch)

z

62.99 69.29 70.87 78.74 88.50 94.49 102.36 110.24 118.43 120.00 129.13 134.17 141.73 149.92 173.23

200 220 225 250 281 300 325 350 376 381 410 426 450 476 530

Standard widths for section 8M: 20(0.79), 30(1.18), 50(1.97), 85(3.35) mm(inch) or in sleeves with a standard width of 480 mm / 18.90 inch Section 14M Section

Lp (mm) 966 - 14M 1190 - 14M 1400 - 14M 1610 - 14M 1778 - 14M 1890 - 14M 2100 - 14M 2310 - 14M 2450 - 14M 2590 - 14M 2800 - 14M 3150 - 14M 3500 - 14M 3850 - 14M 4326 - 14M 4578 - 14M

966.00 1190.00 1400.00 1610.00 1778.00 1890.00 2100.00 2310.00 2450.00 2590.00 2800.00 3150.00 3500.00 3850.00 4326.00 4578.00

Lp (inch) 38.03 46.85 55.12 63.39 70.00 74.41 82.68 90.94 96.46 101.97 110.24 124.02 137.80 151.57 170.31 180.24

z 69 85 100 115 127 135 150 165 175 185 200 225 250 275 309 327

Standard widths for section 14M: 40(1.57), 55(2.17), 85(3.35), 115(4.53), 170(6.69) mm(inch) or in sleeves with a standard width of 470 mm / 18.51 inch

*Available on demand

13

Timing belts

CONTI SYNCHROBELT® Heavy-duty timing belts STD

Features – Moderately oil-resistant – Resistant to temperatures from –20 °C up to +100 °C (depending on application) – Non-ageing and ozone-resistant – Suitable for tropical climates

Section S8M Section S8M

t (mm) 8

hs (mm) 5.30

ht (mm) 2.95

Size designation (example):

t (inch) 0.31

hs (inch) 0.21

ht (inch) 0.12

960 8M

STD 960 - S8M - 50

50

960 mm (37.80 inch) pitch length 8 mm (0.31 inch) tooth pitch, section STD 50 mm (1.97 inch) timing belt width

z: number of teeth Section S8M Section 440 - S8M 480 - S8M 528 - S8M 560 - S8M 600 - S8M 632 - S8M 640 - S8M 656 - S8M 672 - S8M 688 - S8M 696 - S8M 712 - S8M 720 - S8M 728 - S8M 736 - S8M 760 - S8M 768 - S8M 784 - S8M 792 - S8M 800 - S8M 824 - S8M 848 - S8M 864 - S8M 880 - S8M 912 - S8M 920 - S8M 944 - S8M 960 - S8M 992 - S8M 1000 - S8M 1056 - S8M 1064 - S8M 1072 - S8M 1120 - S8M 1136 - S8M 1160 - S8M 1168 - S8M 1176 - S8M 1184 - S8M 1200 - S8M 1216 - S8M 1240 - S8M 1256 - S8M 1264 - S8M 1280 - S8M 1296 - S8M 1304 - S8M 1312 – S8M

14

Lp (mm) 440.00 480.00 528.00 560.00 600.00 632.00 640.00 656.00 672.00 688.00 696.00 712.00 720.00 728.00 736.00 760.00 768.00 784.00 792.00 800.00 824.00 848.00 864.00 880.00 912.00 920.00 944.00 960.00 992.00 1000.00 1056.00 1064.00 1072.00 1120.00 1136.00 1160.00 1168.00 1176.00 1184.00 1200.00 1216.00 1240.00 1256.00 1264.00 1280.00 1296.00 1304.00 1312.00

Lp (inch) 17.32 18.90 20.79 22.05 23.62 24.88 25.20 25.83 26.46 27.09 27.40 28.03 28.35 28.66 28.98 29.92 30.24 30.87 31.18 31.50 32.44 33.39 34.02 34.65 35.91 36.22 37.17 37.80 39.06 39.37 41.57 41.89 42.20 44.09 44.72 45.67 45.98 46.30 46.61 47.24 47.87 48.82 49.45 49.76 50.39 51.02 51.34 51.65

Section S8M Section

z 55 60 66 70 75 79 80 82 84 86 87 89 90 91 92 95 96 98 99 100 103 106 108 110 114 115 118 120 124 125 132 133 134 140 142 145 146 147 148 150 152 155 157 158 160 162 163 164

Lp (mm) 1344 - S8M 1368 - S8M 1400 - S8M 1408 - S8M 1440 - S8M 1480 - S8M 1512 - S8M 1552 - S8M 1600 - S8M 1624 - S8M 1760 - S8M 1776 - S8M 1800 - S8M 1816 - S8M 1912 - S8M 2240 - S8M 2392 - S8M 2800 - S8M 2848 - S8M

1344.00 1368.00 1400.00 1408.00 1440.00 1480.00 1512.00 1552.00 1600.00 1624.00 1760.00 1776.00 1800.00 1816.00 1912.00 2240.00 2392.00 2800.00 2848.00

Lp (inch)

z

52.91 53.86 55.12 55.43 56.69 58.27 59.53 61.10 62.99 63.94 69.29 69.92 70.87 71.50 75.28 88.19 94.17 110.24 112.13

Standard widths for section S8M: 20(0.79), 30(1.18), 50(1.97), 85(3.35) mm(inch) or in sleeves with a standard width of 480 mm / 18.90 inch

168 171 175 176 180 185 189 194 200 203 220 222 225 227 239 280 299 350 356

Timing belts

CONTI SYNCHROLINE® Open-ended rubber timing belts HTD

Open-ended rubber timing belts STD

Features – Very hard wearing – High tensile strength – Low noise emission – Resistant to temperatures from –20 °C up to +100 °C – Tropicalised, ozone-resistant, moderately oil-resistant – Weatherproof – Maintenance-free – Easy to install

Size HTD 5M

Size HTD 8M

Size STD S8M

Width (mm) 10 12 15 20

Width (inch) 0.39 0.47 0.59

Width (mm) 10 12 15 20

Width (inch) 0.39 0.47 0.59

Width (mm) 10 12 15 20

Width (inch) 0.39 0.47 0.59

Minimum order quantity - please enquire as to respective roll length

15

Timing belts

CONTI SYNCHROTWIN® CXP III Heavy-duty double-sided timing belts DHTD

Features – Moderately oil-resistant – Resistant to temperatures from –20 °C up to +100 °C (depending on application) – Non-ageing and ozone-resistant – Suitable for tropical climates – Electrically conductive (antistatic)

Section D5M D8M D14M Section D5M D8M D14M

t (mm) 5 8 14

hs (mm) 5.40 8.20 15.20

ht (mm) 2.10 3.40 6.10

t (inch) 0.20 0.31 0.55

hs (inch) 0.21 0.32 0.60

ht (inch) 0.08 0.13 0.24

Size designation (example): DHTD 960 - 8M - 50 CXP III D 960 8M

double-sided timing belt 960 mm (37.80 inch) pitch length 8 mm (0.31 inch) tooth pitch, section HTD 50 50 mm (1.97 inch) timing belt width CXP III version

z: number of teeth Section D5M Section 565 - D5M CXP III 600 - D5M CXP III 615 - D5M CXP III 620 - D5M CXP III 630 - D5M CXP III 635 - D5M CXP III 665 - D5M CXP III 700 - D5M CXP III 710 - D5M CXP III 740 - D5M CXP III 755 - D5M CXP III 800 - D5M CXP III 835 - D5M CXP III 840 - D5M CXP III 860 - D5M CXP III 890 - D5M CXP III 900 - D5M CXP III 925 - D5M CXP III 1000 - D5M CXP III 1050 - D5M CXP III 1125 - D5M CXP III 1200 - D5M CXP III 1270 - D5M CXP III 1420 - D5M CXP III 1500 - D5M CXP III 1595 - D5M CXP III 1690 - D5M CXP III 2000 - D5M CXP III

Lp (mm) 565.00 600.00 615.00 620.00 630.00 635.00 665.00 700.00 710.00 740.00 755.00 800.00 835.00 840.00 860.00 890.00 900.00 925.00 1000.00 1050.00 1125.00 1200.00 1270.00 1420.00 1500.00 1595.00 1690.00 2000.00

Lp (inch)

Section D8M Section

z

22.24 23.62 24.21 24.41 24.80 25.00 26.18 27.56 27.95 29.13 29.72 31.50 32.87 33.08 33.87 35.04 35.43 36.42 39.37 41.34 44.29 47.24 50.00 55.91 59.06 62.82 66.56 78.77

113 120 123 124 126 127 133 140 142 148 151 160 167 168 172 178 180 185 200 210 225 240 254 284 300 319 338 400

Standard widths for section D5M: 9(0.35), 15(0.59), 25(0.98) mm(inch) or in sleeves with a standard width of 430 mm / 16.93 inch

Section D8M Section 600 - D8M CXP III 624 - D8M CXP III 640 - D8M CXP III 656 - D8M CXP III 720 - D8M CXP III 776 - D8M CXP III 784 - D8M CXP III 800 - D8M CXP III 880 - D8M CXP III 912 - D8M CXP III 920 - D8M CXP III 960 - D8M CXP III 1040 - D8M CXP III

16

Lp (mm) 600.00 624.00 640.00 656.00 720.00 776.00 784.00 800.00 880.00 912.00 920.00 960.00 1040.00

Lp (inch) 23.62 24.57 25.20 25.83 28.35 30.55 30.87 31.50 34.65 35.91 36.22 37.80 40.94

1120 - D8M CXP III 1200 - D8M CXP III 1280 - D8M CXP III 1304 - D8M CXP III 1328 - D8M CXP III 1360 - D8M CXP III 1424 - D8M CXP III 1440 - D8M CXP III 1600 - D8M CXP III 1760 - D8M CXP III 1800 - D8M CXP III 2000 - D8M CXP III *2248 - D8M CXP III *2400 - D8M CXP III

1120.00 1200.00 1280.00 1304.00 1328.00 1360.00 1424.00 1440.00 1600.00 1760.00 1800.00 2000.00 2248.00 2400.00

Lp (inch)

z

44.09 47.24 50.39 51.34 52.28 53.54 56.06 56.69 62.99 69.29 70.87 78.74 88.50 94.49

140 150 160 163 166 170 178 180 200 220 225 250 281 300

Standard widths for section D8M: 20(0.79), 30(1.18), 50(1.97), 85(3.35) mm(inch) or in sleeves with a standard width of 430 mm / 16.93 inch

Section D14M Section 966 - D14M CXP III 1190 - D14M CXP III 1400 - D14M CXP III 1610 - D14M CXP III 1778 - D14M CXP III 1890 - D14M CXP III 2100 - D14M CXP III 2310 - D14M CXP III

Lp (mm) 966.00 1190.00 1400.00 1610.00 1778.00 1890.00 2100.00 2310.00

Lp (inch) 38.03 46.85 55.12 63.39 70.00 74.41 82.68 90.94

z 69 85 100 115 127 135 150 165

Standard widths for section D14M: 40(1.57), 55(2.17), 85(3.35), 115(4.53), 170(6.69) mm(inch) or in sleeves with a standard width of 430 mm / 16.93 inch

z 75 78 80 82 90 97 98 100 110 114 115 120 130

Lp (mm)

* Available on demand

Timing belts

CONTI SYNCHROTWIN® CXP III Heavy-duty double-sided timing belts DSTD

Features – Moderately oil-resistant – Resistant to temperatures from –20 °C up to +100 °C (depending on application) – Non-ageing and ozone-resistant – Suitable for tropical climates – Electrically conductive (antistatic)

Section DS8M Section DS8M

t (mm) 8

hs (mm) 7.30

ht (mm) 3.00

Size designation (example):

t (inch) 0.31

hs (inch) 0.29

ht (inch) 0.12

D 960 8M

DSTD 960 - S8M - 50 CXP III double-sided timing belt 960 mm (37.80 inch) pitch length 8 mm (0.31 inch) tooth pitch, section STD 50 50 mm (1.97 inch) timing belt width CXP III version

z: number of teeth Section DS8M Section *600 - DS8M CXP III *632 - DS8M CXP III *640 - DS8M CXP III *656 - DS8M CXP III *672 - DS8M CXP III *688 - DS8M CXP III *696 - DS8M CXP III *712 - DS8M CXP III *720 - DS8M CXP III *728 - DS8M CXP III *736 - DS8M CXP III *760 - DS8M CXP III *768 - DS8M CXP III *784 - DS8M CXP III *792 - DS8M CXP III *800 - DS8M CXP III *824 - DS8M CXP III *848 - DS8M CXP III *864 - DS8M CXP III *880 - DS8M CXP III *912 - DS8M CXP III *920 - DS8M CXP III *944 - DS8M CXP III *960 - DS8M CXP III *992 - DS8M CXP III *1000 - DS8M CXP III *1056 - DS8M CXP III *1064 - DS8M CXP III *1072 - DS8M CXP III *1120 - DS8M CXP III *1136 - DS8M CXP III *1160 - DS8M CXP III *1168 - DS8M CXP III *1176 - DS8M CXP III *1184 - DS8M CXP III *1200 - DS8M CXP III *1216 - DS8M CXP III *1240 - DS8M CXP III *1256 - DS8M CXP III *1264 - DS8M CXP III *1280 - DS8M CXP III *1296 - DS8M CXP III *1304 - DS8M CXP III *1312 - DS8M CXP III *1344 - DS8M CXP III *1368 - DS8M CXP III *1400 - DS8M CXP III *1408 – DS8M CXP III

Lp (mm) 600.00 632.00 640.00 656.00 672.00 688.00 696.00 712.00 720.00 728.00 736.00 760.00 768.00 784.00 792.00 800.00 824.00 848.00 864.00 880.00 912.00 920.00 944.00 960.00 992.00 1000.00 1056.00 1064.00 1072.00 1120.00 1136.00 1160.00 1168.00 1176.00 1184.00 1200.00 1216.00 1240.00 1256.00 1264.00 1280.00 1296.00 1304.00 1312.00 1344.00 1368.00 1400.00 1408.00

Lp (inch) 23.62 24.88 25.20 25.83 26.46 27.09 27.40 28.03 28.35 28.66 28.98 29.92 30.24 30.87 31.18 31.50 32.44 33.39 34.02 34.65 35.91 36.22 37.17 37.80 39.06 39.37 41.57 41.89 42.20 44.09 44.72 45.67 45.98 46.30 46.61 47.24 47.87 48.82 49.45 49.76 50.39 51.02 51.34 51.65 52.91 53.86 55.12 55.43

Section DS8M Section

z 75 79 80 82 84 86 87 89 90 91 92 95 96 98 99 100 103 106 108 110 114 115 118 120 124 125 132 133 134 140 142 145 146 147 148 150 152 155 157 158 160 162 163 164 168 171 175 176

*1440 - DS8M CXP III *1480 - DS8M CXP III *1512 - DS8M CXP III *1552 - DS8M CXP III *1600 - DS8M CXP III *1624 - DS8M CXP III *1760 - DS8M CXP III *1776 - DS8M CXP III *1800 - DS8M CXP III *1816 - DS8M CXP III *1912 - DS8M CXP III *2240 - DS8M CXP III *2392 - DS8M CXP III

Lp (mm) 1440.00 1480.00 1512.00 1552.00 1600.00 1624.00 1760.00 1776.00 1800.00 1816.00 1912.00 2240.00 2392.00

Lp (inch)

z

56.69 58.27 59.53 61.10 62.99 63.94 69.29 69.92 70.87 71.50 75.28 88.19 94.17

180 185 189 194 200 203 220 222 225 227 239 280 299

Standard widths for section DS8M: 20(0.79), 30(1.18), 50(1.97), 85(3.35) mm(inch) or in sleeves with a standard width of 430 mm / 16.93 inch

* Available on demand

17

Timing belts

CONTI SYNCHROTWIN® Double-sided timing belts DHTD

Features – Moderately oil-resistant – Resistant to temperatures from –20 °C up to +100 °C (depending on application) – Non-ageing and ozone-resistant – Suitable for tropical climates

Section D5M D8M D14M Section D5M D8M D14M

t (mm) 5 8 14

hs (mm) 5.40 8.20 15.20

ht (mm) 2.10 3.40 6.10

t (inch) 0.20 0.31 0.55

hs (inch) 0.21 0.32 0.60

ht (inch) 0.08 0.13 0.24

Size designation (example): DHTD 960 - 8M - 50 D 960 8M 50

double-sided timing belt 960 mm (37.80 inch) pitch length 8 mm (0.31 inch) tooth pitch, section HTD 50 mm (1.97 inch) timing belt width

z: number of teeth Section D5M Section

Lp (mm) 565 - D5M 600 - D5M 615 - D5M 620 - D5M 630 - D5M 635 - D5M 665 - D5M 700 - D5M 710 - D5M 740 - D5M 755 - D5M 800 - D5M 835 - D5M 840 - D5M 860 - D5M 890 - D5M 900 - D5M 925 - D5M 1000 - D5M 1050 - D5M 1125 - D5M 1200 - D5M 1270 - D5M 1420 - D5M 1500 - D5M 1595 - D5M 1690 - D5M 2000 - D5M

565.00 600.00 615.00 620.00 630.00 635.00 665.00 700.00 710.00 740.00 755.00 800.00 835.00 840.00 860.00 890.00 900.00 925.00 1000.00 1050.00 1125.00 1200.00 1270.00 1420.00 1500.00 1595.00 1690.00 2000.00

Lp (inch)

Section D8M Section

z

22.24 23.62 24.21 24.41 24.80 25.00 26.18 27.56 27.95 29.13 29.72 31.50 32.87 33.08 33.87 35.04 35.43 36.42 39.37 41.34 44.29 47.24 50.00 55.91 59.06 62.82 66.56 78.77

113 120 123 124 126 127 133 140 142 148 151 160 167 168 172 178 180 185 200 210 225 240 254 284 300 319 338 400

Standard widths for section D5M: 9(0.35), 15(0.59), 25(0.98) mm(inch) or in sleeves with a standard width of 430 mm / 16.93 inch

Section D8M Section

Lp (mm) 600 - D8M 624 - D8M 640 - D8M 656 - D8M 720 - D8M 776 - D8M 784 - D8M 800 - D8M 880 - D8M 912 - D8M 920 - D8M 960 - D8M 1040 - D8M

18

600.00 624.00 640.00 656.00 720.00 776.00 784.00 800.00 880.00 912.00 920.00 960.00 1040.00

Lp (inch) 23.62 24.57 25.20 25.83 28.35 30.55 30.87 31.50 34.65 35.91 36.22 37.80 40.94

1120 - D8M 1200 - D8M 1280 - D8M 1304 - D8M 1328 - D8M 1360 - D8M 1424 - D8M 1440 - D8M 1600 - D8M 1760 - D8M 1800 - D8M 2000 - D8M *2248 - D8M *2400 - D8M

1120.00 1200.00 1280.00 1304.00 1328.00 1360.00 1424.00 1440.00 1600.00 1760.00 1800.00 2000.00 2248.00 2400.00

Lp (inch)

z

44.09 47.24 50.39 51.34 52.28 53.54 56.06 56.69 62.99 69.29 70.87 78.74 88.50 94.49

140 150 160 163 166 170 178 180 200 220 225 250 281 300

Standard widths for section D8M: 20(0.79), 30(1.18), 50(1.97), 85(3.35) mm(inch) or in sleeves with a standard width of 430 mm / 16.93 inch

Section D14M Section 966 - D14M 1190 - D14M 1400 - D14M 1610 - D14M 1778 - D14M 1890 - D14M 2100 - D14M 2310 - D14M

Lp (mm) 966.00 1190.00 1400.00 1610.00 1778.00 1890.00 2100.00 2310.00

Lp (inch) 38.03 46.85 55.12 63.39 70.00 74.41 82.68 90.94

z 69 85 100 115 127 135 150 165

Standard widths for section D14M: 40(1.57), 55(2.17), 85(3.35), 115(4.53), 170(6.69) mm(inch) or in sleeves with a standard width of 430 mm / 16.93 inch

z 75 78 80 82 90 97 98 100 110 114 115 120 130

Lp (mm)

* Available on demand

Timing belts

CONTI SYNCHROTWIN® Double-sided timing belts DSTD

Features – Moderately oil-resistant – Resistant to temperatures from –20 °C up to +100 °C (depending on application) – Non-ageing and ozone-resistant – Suitable for tropical climates – Electrically conductive (antistatic)

Section DS8M Section DS8M

t (mm) 8

hs (mm) 7.30

ht (mm) 3.00

Size designation (example):

t (inch) 0.31

hs (inch) 0.29

ht (inch) 0.12

D 960 8M

DSTD 960 - S8M - 50

50

double-sided timing belt 960 mm (37.80 inch) pitch length 8 mm (0.31 inch) tooth pitch, section STD 50 mm (1.97 inch) timing belt width

z: number of teeth Section DS8M Section *600 - DS8M *632 - DS8M *640 - DS8M *656 - DS8M *672 - DS8M *688 - DS8M *696 - DS8M *712 - DS8M *720 - DS8M *728 - DS8M *736 - DS8M *760 - DS8M *768 - DS8M *784 - DS8M *792 - DS8M *800 - DS8M *824 - DS8M *848 - DS8M *864 - DS8M *880 - DS8M *912 - DS8M *920 - DS8M *944 - DS8M *960 - DS8M *992 - DS8M *1000 - DS8M *1056 - DS8M *1064 - DS8M *1072 - DS8M *1120 - DS8M *1136 - DS8M *1160 - DS8M *1168 - DS8M *1176 - DS8M *1184 - DS8M *1200 - DS8M *1216 - DS8M *1240 - DS8M *1256 - DS8M *1264 - DS8M *1280 - DS8M *1296 - DS8M *1304 - DS8M *1312 - DS8M *1344 - DS8M *1368 - DS8M *1400 - DS8M *1408 - DS8M

Lp (mm) 600.00 632.00 640.00 656.00 672.00 688.00 696.00 712.00 720.00 728.00 736.00 760.00 768.00 784.00 792.00 800.00 824.00 848.00 864.00 880.00 912.00 920.00 944.00 960.00 992.00 1000.00 1056.00 1064.00 1072.00 1120.00 1136.00 1160.00 1168.00 1176.00 1184.00 1200.00 1216.00 1240.00 1256.00 1264.00 1280.00 1296.00 1304.00 1312.00 1344.00 1368.00 1400.00 1408.00

Lp (inch) 23.62 24.88 25.20 25.83 26.46 27.09 27.40 28.03 28.35 28.66 28.98 29.92 30.24 30.87 31.18 31.50 32.44 33.39 34.02 34.65 35.91 36.22 37.17 37.80 39.06 39.37 41.57 41.89 42.20 44.09 44.72 45.67 45.98 46.30 46.61 47.24 47.87 48.82 49.45 49.76 50.39 51.02 51.34 51.65 52.91 53.86 55.12 55.43

Section DS8M Section

z 75 79 80 82 84 86 87 89 90 91 92 95 96 98 99 100 103 106 108 110 114 115 118 120 124 125 132 133 134 140 142 145 146 147 148 150 152 155 157 158 160 162 163 164 168 171 175 176

*1440 - DS8M *1480 - DS8M *1512 - DS8M *1552 - DS8M *1600 - DS8M *1624 - DS8M *1760 - DS8M *1776 - DS8M *1800 - DS8M *1816 - DS8M *1912 - DS8M *2240 - DS8M *2392 - DS8M

Lp (mm) 1440.00 1480.00 1512.00 1552.00 1600.00 1624.00 1760.00 1776.00 1800.00 1816.00 1912.00 2240.00 2392.00

Lp (inch)

z

56.69 58.27 59.53 61.10 62.99 63.94 69.29 69.92 70.87 71.50 75.28 88.19 94.17

180 185 189 194 200 203 220 222 225 227 239 280 299

Standard widths for section DS8M: 20(0.79), 30(1.18), 50(1.97), 85(3.35) mm(inch) or in sleeves with a standard width of 430 mm / 16.93 inch

* Available on demand

19

Timing belts

CONTI SYNCHROTWIN® Double-sided timing belts DH, DIN 5296

Features – Moderately oil-resistant – Resistant to temperatures from –20 °C up to +100 °C (depending on application) – Non-ageing and ozone-resistant – Suitable for tropical climates

Section DH Section DH

t (mm) 12.7

hs (mm) 6.00

ht (mm) 2.29

Size designation (example):

t (inch) 0.50

hs (inch) 0.24

ht (inch) 0.09

300 D H 075

z: number of teeth Section DH Section

Lp (mm) 270 DH 300 DH 330 DH 335 DH 360 DH 370 DH 390 DH 420 DH 450 DH 480 DH 510 DH 540 DH 570 DH 600 DH 630 DH 660 DH 700 DH 730 DH 750 DH

685.80 762.00 838.20 850.90 914.40 939.80 990.60 1066.80 1143.00 1219.20 1295.40 1371.60 1447.80 1524.00 1600.20 1676.40 1778.00 1854.20 1905.00

Lp (inch) 27.00 30.00 33.00 33.50 36.00 37.00 39.00 42.00 45.00 48.00 51.00 54.00 57.00 60.00 63.00 66.00 70.00 73.00 75.00

z 54 60 66 67 72 74 78 84 90 96 102 108 114 120 126 132 140 146 150

Standard widths for section DH: 075 (width 19.05/0.75) 100 (width 25.40/1.00) 150 (width 38.10/1.50) 200 (width 50.80/2.00) 300 (width 76.20/3.00) (mm/inch) or in sleeves with a standard width of 430 mm / 16.93 inch

20

300 DH 075 30 inch (762.00 mm) pitch length double-sided timing belt 1/2 inch (12.7 mm) tooth pitch 0.75 inch (19.05 mm) timing belt width

Timing belts

CONTI SYNCHRODRIVE® Open-ended polyurethane timing belts HTD

Open-ended polyurethane timing belts STD

Section Features – Oil-resistant HTD 3M – Petrol and benzene resistant HTD 5M – Resistant to temperatures HTD 8M from –30 °C up to +80 °C. For operational HTD 14M temperatures outside this range please seek advice from our technical experts.

STD S5M – Hard-wearing STD S8M – Resistant to hydrolysis Section – Resistant to UV radiation and ozone – Maintenance-free HTD 3M HTD 5M HTD 8M HTD 14M STD S5M STD S8M

Section HTD 3M (HP) Section HTD 3M HTD 3M HTD 3M HTD 3M HTD 3M Section HTD 5M (HP) Section HTD 5M HTD 5M HTD 5M HTD 5M HTD 5M Section HTD 8M (HP) Section HTD 8M HTD 8M HTD 8M HTD 8M HTD 8M HTD 8M HTD 8M Section HTD 14M (HP) Section HTD 14M HTD 14M HTD 14M HTD 14M HTD 14M HTD 14M

b (mm) 5.00 10.00 15.00 25.00 50.00

b (mm) 5.00 10.00 15.00 25.00 50.00

b (mm) 10.00 15.00 20.00 30.00 50.00 85.00 100.00

b (mm) 25.00 40.00 55.00 85.00 100.00 120.00

t (mm) 3 5 8 14 5 8

hs (mm) 2.40 3.60 5.60 10.00 3.40 5.20

ht (mm) 1.30 2.10 3.40 6.10 1.90 3.00

t (inch) 0.12 0.20 0.31 0.55 0.20 0.31

hs (inch) 0.09 0.14 0.22 0.39 0.13 0.20

ht (inch) 0.04 0.08 0.13 0.24 0.07 0.12

b (inch) 0.20 0.39 0.59 0.98 1.97

b (inch) 0.20 0.39 0.59 0.98 1.97

Size designation (example): M 30 - 8M - 50 HP [PAZ] [PAR] 8M - 50 HF -V- 2500/98.42(mm/inch) M 30 8M 50 HP PAZ PAR -V-

Length of the rolls 8 mm (0.31 inch) tooth pitch 50 mm (1.97 inch) timing belt width Version HP (high power) Fabric coating on tooth side (optional) Fabric coated backing (optional) Pre-joined belt e.g. with length 2500/98.42 (mm/inch)

Section STD S5M (HP) Section STD S5M STD S5M STD S5M STD S5M STD S5M Section STD S8M (HP) Section STD S8M STD S8M STD S8M STD S8M STD S8M STD S8M STD S8M

b (mm) 5.00 10.00 15.00 25.00 50.00

b (mm) 10.00 15.00 20.00 30.00 50.00 85.00 100.00

b (inch) 0.20 0.39 0.59 0.98 1.97

b (inch) 0.39 0.59 0.79 1.18 1.97 3.35 3.94

b (inch) 0.39 0.59 0.79 1.18 1.97 3.35 3.94

b (inch) 0.98 1.57 2.17 3.35 3.94 4.72

Available tension member versions: HP high power HF high flexibility HS high stiffness XHP extremely high power

Standard roll lengths 30 m. Alternative tension members, belt widths, shorter lengths, fabric coating (PAR/PAZ) as well as pre-joined belts (for lengths > 1000 mm), available on request.

21

Timing belts

CONTI SYNCHRODRIVE® Open-ended polyurethane timing belts XL; L; H Section Features – Oil-resistant XL – Petrol and benzene L – Resistant to temperatures H from –30 °C up to +80 °C. For operational temperatures outside this range please seek advice from our technical experts.

Section – Hard-wearing XL – Resistant to hydrolysis L – Resistant to UV radiation and ozone H – Maintenance-free

Section XL Trapezoidal (HF) Section XL 025 XL 037 XL 050 XL 075 XL 100 XL 200 Section L Trapezoidal (HF) Section L 050 L 075 L 100 L 150 L 200 Section H Trapezoidal (HF) Section H 050 H 075 H 100 H 150 H 200

b (mm) 6.35 9.53 12.70 19.05 25.40 50.80

b (mm) 12.70 19.05 25.40 38.10 50.80

b (mm) 12.70 19.05 25.40 38.10 50.80

t (mm) 5.08 9.525 12.70

hs (mm) 2.30 3.60 4.30

ht (mm) 1.27 1.91 2.29

t (inch) 0.2 0.375 0.5

hs (inch) 0.09 0.14 0.17

ht (inch) 0.05 0.08 0.09

Size designation (example): M 30 - L - 100 [PAZ] [PAR] M 30 L 100 PAZ PAR -V-

Length of the rolls 9.525 mm (0.375 inch) tooth pitch 25.4 mm (1 inch) timing belt width Fabric coating on tooth side (optional) Fabric coated backing (optional) Pre-joined belt e.g. with length 2500/98.42 (mm/inch)

b (1/100 inch) 25 37 50 75 100 200

b (1/100 inch) 50 75 100 150 200

b (1/100 inch) 50 75 100 150 200

Available tension member versions: HP high power HF high flexibility HS high stiffness XHP extremely high power

Standard roll lengths 30 m. Alternative tension members, belt widths, shorter lengths, fabric coating (PAR/PAZ) as well as pre-joined belts (for lengths > 1000 mm), available on request.

22

Timing belts

CONTI SYNCHRODRIVE® N 10 Nubbed belts

Section Features – Oil-resistant N10 – Petrol and benzene – Resistant to temperatures from –30 °C up to +80 °C. For operational Section temperatures outside this range please seek advice from our technical experts.

N10 – Hard-wearing – Resistant to hydrolysis – Resistant to UV radiation and ozone – Maintenance-free

t (mm) 10

hs (mm) 4.5

ht (mm) 2.4

t (inch) 0.39

hs (inch) 0.18

ht (inch) 0.10

Size designation (example): M 30 - N10 – 40 HF N10 - 40 HF -V- 2500/98.43(mm/inch) M 30 N10 40 HF PAN PAR -V-

N10 HF Section N10 - 10 N10 - 20 N10 - 30 N10 - 40 N10 - 50 N10 - 60 N10 - 70 N10 - 80 N10 - 90 N10 - 100

Version HF HF HF HF HF HF HF HF HF HF

Width (mm) 10 20 30 40 50 60 70 80 90 100

Length of the rolls 10 mm (0.39 inch) nubbed pitch 40 mm (1.57 inch) timing belt width Version HF (high flexibility) Fabric coating on nubbed side (optional) Fabric coated backing (optional) Pre-joined belt e.g. with length 2500/98.43 (mm/inch)

Width (inch) 0.39 0.79 1.18 1.57 1.97 2.36 2.76 3.53 3.54 3.94

23

V-ribbed belts

CONTI-V MULTIRIB® Power, Elast Multiple V-ribbed belts, DIN 7867

Features (Proflie PJ) – Moderately oil-resistant – Resistant to temperatures from –30 °C up to +80 °C – Electrically conductive (antistatic) to ISO 1813 – Suitable for serpentine drives – Suitable for tropical climates

Section PJ Section PJ Section PK PL PM

Features (Proflie PK/PL/PM) – Moderately oil-resistant – Resistant to temperatures from –30 °C up to +120 °C – Suitable for serpentine drives – Suitable for tropical climates

Section

Section PJ Lb

Section PJ Lb

(mm) 356 381 406 432 457 483 508 559 584 610 660 686 711 737 762 787 813 838 864 889 914 965 991 1016 1054 1092 1143 1168 1194 1200 1208 1219 1245 1270 1295 1321 1333 1372 1397 1461 1473 1549 1600

24

Lb (1/10 inch) 140 150 160 170 180 190 200 220 230 240 260 270 280 290 300 310 320 330 340 350 360 380 390 400 415 430 450 460 470 472 476 480 490 500 510 520 525 540 550 575 580 610 630

Ribs per sleeve +/-2 148 148 148 150 238 238 118 238 238 238 238 238 238 238 118 118 158 238 158 78 158 238 118 238 118 238 238 158 238 78 78 158 230 238 78 238 78 158 238 78 238 158 238

PK PL PM

(mm) 1626 1651 1702 1753 1778 1854 1915 1930 1956 1981 2019 2083 2210 2286 2337 2489

s (mm) 2.34

h (mm) 3.8

s (inch) 0.09

h (inch) 0.15

s (mm) 3.56 4.70 9.40

h (mm) 5.0 9.0 14.35

s (inch) 0.14 0.19 0.37

h (inch) 0.20 0.35 0.57

Lb

Ribs per sleeve +/-2

(1/10 inch) 640 650 670 690 700 730 754 760 770 780 795 820 870 900 920 980

78 158 78 158 78 238 238 158 238 238 78 78 78 78 78 238

Size designation (example): 6 PJ 1600 6 number of ribs PJ section designation 1600 reference length mm

Section PK Lb

Lb

(mm)

(1/10 inch)

635 648 698 730 770 813 830 885 925 960 1010 1035 1132 1207 1246 1298 1357 1420 1459 1481 1521 1562 1607 1630 1675 1725 1815 1885 1982 2031 2080 2171 2225 2471 2551

250 255 275 287 303 320 327 348 364 378 398 407 446 475 491 511 534 559 575 583 598 615 633 642 659 679 726 742 780 800 819 855 876 972 1004

Ribs per sleeve +/-2 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148

Section PH, intermediate lengths and minimum purchase quantities available on request.

Section PL ZAR version available on request in sizes above 1841 mm (72.48 inch) (surcharge +50%), PM ZAR version in sizes above 2286 mm (90.00 inch).

CONTI-V MULTIRIB Elast for drives with a fixed centre distance are available in the profile PJ upon request.

V-ribbed belts CONTI-V MULTIRIB№Бе Power, Elast Multiple V-ribbed belts

Section PL Lb

Lb

(mm)

(1/10 inch)

991 1041 1149 1168 1194 1219 1270 1295 1321 1334 1346 1372 1397 1422 1435 1473 1499 1562 1613 1651 1664 1715 1765 1803 1841 1943 1956 1981 2019 2070 2096 2134 2195 2235 2324 2362 2477 2515 2705 2745 2845 2895 2921 2997 3085 3124 3289 3327 3492 3696 4051 4191 4318 4470 4622 5029 5385 6096 7055

390 410 452 460 470 480 500 510 520 525 530 540 550 560 565 580 590 615 635 650 655 675 695 710 725 765 770 780 795 815 825 840 865 880 915 930 975 990 1065 1080 1120 1140 1150 1180 1215 1230 1295 1310 1375 1455 1595 1650 1700 1760 1820 1980 2120 2400 2778

Ribs per sleeve +/-2 38 38 38 118 118 118 78 118 38 38 118 118 118 38 38 38 38 118 78 38 78 118 118 38 78 78 38 38 78 78 38 78 38 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78 78

Section PL Lb (mm) 2286 2388 2515 2693 2832 2921 3010 3124 3327 3531 3734 4089 4191 4470 4648 5029 5410 6121 6883 7646 8408 9169 9931 10693 12217 13741 15266 16764

Lb (1/10 inch) 900 940 990 1060 1115 1150 1185 1230 1310 1390 1470 1610 1650 1760 1830 1980 2130 2410 2710 3010 3310 3610 3910 4210 4810 5410 6010 6600

Ribs per sleeve +/-2 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40

25

V-belts

CONTI-V® STANDARD Multiflex Classical-section wrapped V-belts, DIN 2215

Section

Features – Moderately oil-resistant – Resistant to temperatures from –55 °C up to +70 °C – Electrically conductive (antistatic) to ISO 1813 – Insensitive to dust – Suitable for tropical climates

bo (mm)

bo (inch)

h (mm)

h (inch)

8/10/Z 13/A 17/B 20/22/C 25/32/D 40/E

8 10 13 17 20 22 25 32 40

0.31 0.39 0.51 0.67 0.79 0.87 0.98 1.26 1.57

5 6 8 11 12.5 14 16 20 25

0.20 0.24 0.31 0.43 0.49 0.55 0.63 0.79 0.98

L=L

from 1000 mm upwards

Bundle sizes Section 8/-

Li up to 1250

Pieces 25

Section 10/Z

Li up to 1450 2500

Pieces 25 10

Section 13/A

Li up to 1475 2475 5000

Pieces 25 10 5

Section 17/B

Li up to 1470 2450 7000

Pieces 25 10 5

Section 20/-

Li up to 1400 5600 6000

Pieces 10 5 3

Section 22/C

Li up to 1500 5600 8000

Pieces 10 5 3

Section 25/-

Li up to 2800 9000

Pieces 5 3

Section 32/D

Li up to 2360 6700 12500

Pieces 5 3 2

Section 40/E

Li up to 8000 11200

Pieces 2 1

Section 8/Ref. 6533053 6533056 6533058 6533060 6533063 6533066 6533067 6733070 6533071 6533075 6533076 6533080 6533083 6533085 6733087 6533090 6533095 6533100 6743235 6733105 6533120 6733125

Ld (mm)

Ld (inch)

Li (mm)

Li (inch)

549 579 599 619 649 689 699 719 729 769 779 819 849 869 894 919 969 1019 1039 1069 1219 1269

21.61 22.80 23.58 24.37 25.55 27.13 27.52 28.31 28.70 30.28 30.67 32.24 33.43 34.21 35.20 36.18 38.15 40.12 40.91 42.09 47.99 49.96

530 560 580 600 630 670 680 700 710 750 760 800 830 850 875 900 950 1000 1020 1050 1200 1250

20.87 22.05 22.83 23.62 24.80 26.38 26.77 27.56 27.95 29.53 29.92 31.50 32.68 33.46 34.45 35.43 37.40 39.37 40.16 41.34 47.24 49.21

Intermediate lengths and minimum purchase quantities available on request.

26

RMA

Section 10/Z Ref.

Ld (mm)

Ld (inch)

Li (mm)

Li (inch)

6534045 6534047 6534050 6534051 6534053 6534056 6534058 6534060 6534063 6534067 6534071 6534073 6534075 6594076 6534078 6534080 6534082 6534085 6594086 6534087 6534090 6534095 6534094 6534100 6794101 6534103 6794104 6534106 6794108 6534111 6534112 6594115 6534117 6534118 6794119

470 495 520 540 550 580 595 625 650 690 730 750 770 780 795 820 840 870 890 900 920 970 995 1020 1040 1050 1060 1080 1100 1120 1140 1170 1190 1200 1220

18.50 19.49 20.47 21.26 21.65 22.83 23.43 24.61 25.59 27.17 28.74 29.53 30.31 30.71 31.30 32.28 33.07 34.25 35.04 35.43 36.22 38.19 39.17 40.16 40.94 41.34 41.73 42.52 43.31 44.09 44.88 46.06 46.85 47.24 48.03

450 475 500 520 530 560 575 600 630 670 710 730 750 765 775 800 820 850 865 875 900 950 980 1000 1016 1030 1041 1060 1080 1105 1120 1150 1170 1180 1194

17.72 18.70 19.69 20.47 20.87 22.05 22.64 23.62 24.80 26.38 27.95 28.74 29.53 30.12 30.51 31.50 32.28 33.46 34.06 34.45 35.43 37.40 38.58 39.37 40.00 40.55 40.98 41.73 42.52 43.50 44.09 45.28 46.06 46.46 47.01

RMA Z 17.75 Z 18.75 Z 19.75 Z 20.5 Z 21 Z 22 Z 22.5 Z 23.5 Z 25 Z 26.5 Z 28 Z 28.75 Z 29.5 Z 30 Z 30.5 Z 31.5 Z 32.5 Z 33.5 Z 34 Z 34.5 Z 35.5 Z 37.5 Z 38.5 Z 39.5 Z 40 Z 40.5 Z 41 Z 42 Z 42.5 Z 43.5 Z 44 Z 45 Z 46 Z 46.5 Z 47

V-belts CONTI-V№Бе STANDARD Multiflex Wrapped V-belts

Section 10/Z Ref.

Ld (mm)

Ld (inch)

Li (mm)

Li (inch)

RMA

6794121 6534124 6534125 6594127 6534130 6534132 6594135 6594137 6534140 6534145 6534147 6534150 6534153 6594155 6534160 6594163 6594165 6534168 6534170 6534173 6594175 6534178 6534180 6534183 6594185 6534190 6594197 6534200 6534208 6534212 6534224 6594236 6534250

1240 1250 1270 1290 1320 1340 1370 1400 1420 1470 1500 1520 1550 1570 1620 1650 1670 1700 1720 1750 1770 1800 1820 1850 1870 1920 2000 2020 2100 2140 2260 2380 2520

48.82 49.21 50.00 50.79 51.97 52.76 53.94 55.12 55.91 57.87 59.06 59.84 61.02 61.81 63.78 64.96 65.75 66.93 67.72 68.90 69.69 70.87 71.65 72.83 73.62 75.59 78.74 79.53 82.68 84.25 88.98 93.70 99.21

1215 1230 1250 1270 1300 1320 1346 1371 1400 1450 1475 1500 1525 1550 1600 1626 1651 1680 1700 1730 1750 1780 1800 1830 1850 1900 1975 2000 2080 2120 2240 2360 2500

47.83 48.43 49.21 50.00 51.18 51.97 52.99 53.98 55.12 57.09 58.07 59.06 60.04 61.02 62.99 64.02 65.00 66.14 66.93 68.11 68.90 70.08 70.87 72.05 72.83 74.80 77.76 78.74 81.89 83.46 88.19 92.91 98.43

Z 48 Z 48.5 Z 49 Z 50 Z 51 Z 52 Z 53 Z 54 Z 55 Z 57 Z 58 Z 59 Z 60 Z 61 Z 63 Z 64 Z 65 Z 66 Z 67 Z 68 Z 69 Z 70 Z 71 Z 72 Z 73 Z 75 Z 78 Z 79 Z 82 Z 83.5 Z 88 Z 93 Z 98.5

Section 13/A Ref. 6535056 6535058 6535060 6535063 6535066 6535067 6535069 6535071 6535073 6535075 6790077 6535078 6535079 6535080 6535081 6535082 6535084 6535083 6535086 6535088 6535089 6535090 6535092 6535093 6535095 6535096 6535094 6535100 6535102 6735103 6535104 6535106

Ld (mm)

Ld (inch)

Li (mm)

Li (inch)

RMA

590 620 640 660 680 700 720 740 760 780 790 800 810 820 840 850 870 875 880 890 920 930 940 950 970 990 1005 1020 1050 1060 1070 1090

23.23 24.41 25.20 25.98 26.77 27.56 28.35 29.13 29.92 30.71 31.10 31.50 31.89 32.28 33.07 33.46 34.25 34.45 34.65 35.04 36.22 36.61 37.01 37.40 38.19 38.98 39.57 40.16 41.34 41.73 42.13 42.91

560 580 600 630 655 670 690 710 730 750 767 780 787 800 813 825 838 850 855 875 889 900 914 925 950 965 975 1000 1016 1030 1041 1060

22.05 22.83 23.62 24.80 25.79 26.38 27.17 27.95 28.74 29.53 30.20 30.71 30.98 31.50 32.01 32.48 32.99 33.46 33.66 34.45 35.00 35.43 35.98 36.42 37.40 37.99 38.39 39.37 40.00 40.55 40.98 41.73

A 22 A 23 A 24 A 25 A 26 A 26.5 A 27 A 28 A 29 A 29.5 A 30 A 30.5 A 31 A 31 A 32 A 32.5 A 33 A 33.5 A 34 A 34.5 A 35 A 35.5 A 36 A 36.5 A 37.5 A 38 A 38.5 A 39.5 A 40 A 40.5 A 41 A 42

Section 13/A Ref. 6790107 6535109 6535111 6535112 6535114 6535117 6535118 6535120 6535122 6535125 6535127 6535130 6535132 6535135 6535137 6535140 6535142 6535145 6535148 6535150 6535153 6535155 6535158 6535160 6535163 6535165 6535168 6535170 6535173 6535175 6535178 6535180 6590182 6535185 6590188 6535190 6590193 6590196 6535197 6535200 6535201 6535203 6535204 6535206 6535208 6535210 6535212 6590213 6535215 6535218 6535220 6535224 6590226 6535229 6590231 6590234 6535236 6590239 6590241 6535244 6535248 6535250 6535254 6590259 6515265 6590267 6515273 6590274

Ld (mm) 1105 1130 1135 1150 1175 1200 1210 1230 1250 1280 1300 1330 1360 1380 1410 1430 1460 1480 1510 1530 1550 1580 1610 1640 1660 1690 1710 1740 1760 1780 1810 1840 1860 1890 1920 1930 1960 1990 2010 2050 2060 2070 2080 2090 2110 2140 2150 2160 2200 2220 2240 2270 2290 2320 2340 2370 2400 2420 2450 2480 2500 2530 2570 2620 2680 2700 2760 2770

Ld (inch) 43.50 44.49 44.69 45.28 46.26 47.24 47.64 48.43 49.21 50.39 51.18 52.36 53.54 54.33 55.51 56.30 57.48 58.27 59.45 60.24 61.02 62.20 63.39 64.57 65.35 66.54 67.32 68.50 69.29 70.08 71.26 72.44 73.23 74.41 75.59 75.98 77.17 78.35 79.13 80.71 81.10 81.50 81.89 82.28 83.07 84.25 84.65 85.04 86.61 87.40 88.19 89.37 90.16 91.34 92.13 93.31 94.49 95.28 96.46 97.64 98.43 99.61 101.18 103.15 105.51 106.30 108.66 109.05

Li (mm) 1075 1090 1105 1120 1143 1168 1180 1200 1220 1250 1270 1300 1320 1346 1372 1400 1422 1448 1475 1500 1525 1550 1575 1600 1625 1651 1676 1700 1725 1750 1780 1800 1825 1854 1880 1900 1930 1956 1980 2000 2010 2030 2040 2057 2083 2100 2120 2134 2150 2184 2200 2240 2261 2285 2311 2337 2360 2388 2413 2435 2475 2500 2540 2591 2650 2667 2730 2743

Li (inch)

RMA

42.32 42.91 43.50 44.09 45.00 45.98 46.46 47.24 48.03 49.21 50.00 51.18 51.97 52.99 54.02 55.12 55.98 57.01 58.07 59.06 60.04 61.02 62.01 62.99 63.98 65.00 65.98 66.93 67.91 68.90 70.08 70.87 71.85 72.99 74.02 74.80 75.98 77.01 77.95 78.74 79.13 79.92 80.31 80.98 82.01 82.68 83.46 84.02 84.65 85.98 86.61 88.19 89.02 89.96 90.98 92.01 92.91 94.02 95.00 95.87 97.44 98.43 100.00 102.01 104.33 105.00 107.48 107.99

A 42.5 A 43 A 43.5 A 44 A 45 A 46 A 46.5 A 47 A 48 A 49 A 50 A 51 A 52 A 53 A 54 A 55 A 56 A 57 A 58 A 59 A 60 A 61 A 62 A 63 A 64 A 65 A 66 A 67 A 68 A 69 A 70 A 71 A 72 A 73 A 74 A 75 A 76 A 77 A 78 A 79 A 79.5 A 80 A 80.5 A 81 A 82 A 83 A 83.5 A 84 A 85 A 86 A 87 A 88 A 89 A 90 A 91 A 92 A 93 A 94 A 95 A 96 A 97 A 98 A 100 A 102 A 104 A 105 A 107 A 108

27

V-belts CONTI-V№Бе STANDARD Multiflex Wrapped V-belts

Section 13/A Ref. 6515280 6515284 6590295 6515300 6515305 6515315 6515325 6590330 6515335 6590340 6590345 6515355 6515365 6590375 6590389 6590391 6515400 6590425 6590447 6590475 6790500

Ld (mm) 2830 2880 2980 3030 3080 3190 3290 3330 3390 3440 3490 3590 3690 3790 3920 3940 4040 4270 4500 4780 5030

Ld (inch) 111.42 113.39 117.32 119.29 121.26 125.59 129.53 131.10 133.46 135.43 137.40 141.34 145.28 149.21 154.33 155.12 159.05 168.11 177.17 188.19 198.03

Li (mm) 2800 2840 2946 3000 3050 3150 3250 3302 3350 3404 3454 3550 3650 3750 3886 3912 4000 4250 4470 4750 5000

Li (inch)

RMA

110.24 111.81 115.98 118.11 120.08 124.02 127.95 130.00 131.89 134.02 135.98 139.76 143.70 147.64 152.99 154.02 157.48 167.32 175.98 187.01 196.85

A 110 A 112 A 116 A 118 A 120 A 124 A 128 A 130 A 132 A 134 A 136 A 140 A 144 A 148 A 153 A 154 A 158 A 167 A 176 A 187 A 197

Section 17/B Ref.

Ld (mm)

Ld (inch)

Li (mm)

Li (inch)

RMA

6536061 6736065 6536067 6791069 6536071 6536072 6536075 6536076 6536078 6536080 6536083 6736084 6536086 6536088 6536089 6536090 6536092 6536094 6536095 6536096 6536100 6536102 6536103 6736104 6736105 6536106 6536108 6536109 6536112 6536115 6536116 6536117 6536120 6536122 6536124 6536125 6736127 6536170 6536132 6736133 6536135 6736136 6536137 6536140

655 690 710 725 750 765 790 800 815 830 865 880 890 910 930 940 960 980 1000 1015 1040 1060 1070 1080 1090 1100 1115 1130 1160 1180 1210 1220 1240 1250 1260 1290 1310 1340 1360 1375 1390 1400 1410 1440

25.79 27.17 27.95 28.54 29.53 30.12 31.10 31.50 32.09 32.68 34.06 34.65 35.04 35.83 36.61 37.01 37.80 38.58 39.37 39.96 40.94 41.73 42.13 42.52 42.91 43.31 43.90 44.49 45.67 46.46 47.64 48.03 48.82 49.21 49.61 50.79 51.57 52.76 53.54 54.13 54.72 55.12 55.51 56.69

615 650 670 686 710 725 750 762 775 800 825 838 850 875 889 900 925 950 965 975 1000 1017 1030 1040 1050 1060 1075 1090 1120 1150 1175 1180 1200 1215 1225 1250 1270 1300 1320 1335 1350 1360 1372 1400

24.21 25.59 26.38 27.01 27.95 28.54 29.53 30.00 30.51 31.50 32.48 32.99 33.46 34.45 35.00 35.43 36.42 37.40 37.99 38.39 39.37 40.04 40.55 40.94 41.34 41.73 42.32 42.91 44.09 45.28 46.26 46.46 47.24 47.83 48.23 49.21 50.00 51.18 51.97 52.56 53.15 53.54 54.02 55.12

B 24 B 25.5 B 26.5 B 27 B 28 B 28.5 B 29.5 B 30 B 30.5 B 31.5 B 32.5 B 33 B 33.5 B 34.5 B 35 B 35.5 B 36.5 B 37.5 B 38 B 38.5 B 39.5 B 40 B 40.5 B 41 B 41.5 B 42 B 42.5 B 43 B 44 B 45 B 46 B 46.5 B 47 B 47.5 B 48 B 49 B 50 B 51 B 52 B 52.5 B 53 B 53.5 B 54 B 55

28

Section 17/B Ref.

Ld (mm)

6536142 6536145 6536147 6536150 6536152 6536155 6536158 6536160 6536163 6536165 6536168 6536170 6536173 6536175 6536176 6591178 6536180 6591183 6536185 6591188 6536190 6591193 6536195 6536197 6536200 6536203 6536206 6536208 6536211 6536212 6591213 6536216 6536218 6536220 6536224 6591226 6536229 6536230 6591234 6536236 6436000 6536240 6436000 6536245 6536247 6536250 6591251 6536254 6591256 6591260 6591262 6516265 6516267 6516270 6591275 6591277 6516280 6591282 6516284 6516290 6591292 6516295 6516300 6516305 6591310 6516315 6591317 6591320

1460 1490 1510 1540 1560 1590 1620 1640 1670 1690 1720 1740 1760 1790 1800 1820 1850 1870 1900 1920 1950 1970 2000 2020 2050 2070 2100 2130 2150 2160 2180 2200 2230 2250 2280 2300 2330 2350 2380 2400 2430 2440 2460 2480 2500 2530 2560 2580 2610 2630 2660 2680 2700 2730 2790 2810 2840 2860 2890 2940 2960 2990 3040 3090 3140 3200 3220 3240

Ld (inch) 57.48 58.66 59.45 60.63 61.42 62.60 63.78 64.57 65.75 66.54 67.72 68.50 69.29 70.47 70.87 71.65 72.83 73.62 74.80 75.59 76.77 77.56 78.74 79.53 80.71 81.50 82.68 83.86 84.65 85.04 85.83 86.61 87.80 88.58 89.76 90.55 91.73 92.52 93.70 94.49 95.67 96.06 96.85 97.64 98.43 99.61 100.79 101.57 102.76 103.54 104.72 105.51 106.30 107.48 109.84 110.63 111.81 112.60 113.78 115.75 116.54 117.72 119.68 121.65 123.62 125.98 126.77 127.56

Li (mm) 1422 1450 1470 1500 1525 1550 1575 1600 1625 1650 1676 1700 1725 1750 1761 1775 1800 1829 1850 1880 1900 1930 1950 1981 2000 2030 2060 2083 2108 2120 2134 2160 2184 2200 2240 2261 2286 2300 2337 2360 2388 2400 2413 2450 2465 2500 2515 2540 2565 2600 2616 2650 2667 2700 2750 2769 2800 2820 2840 2900 2921 2950 3000 3050 3100 3150 3175 3200

Li (inch)

RMA

55.98 57.09 57.87 59.06 60.04 61.02 62.01 62.99 63.98 64.96 65.98 66.93 67.91 68.90 69.33 69.88 70.87 72.01 72.83 74.02 74.80 75.98 76.77 77.99 78.74 79.92 81.10 82.01 82.99 83.46 84.02 85.04 85.98 86.61 88.19 89.02 90.00 90.55 92.01 92.91 94.02 94.49 95.00 96.46 97.05 98.43 99.02 100.00 100.98 102.36 102.99 104.33 105.00 106.30 108.27 109.02 110.24 111.02 111.81 114.17 115.00 116.14 118.11 120.08 122.05 124.02 125.00 125.98

B 56 B 57 B 58 B 59 B 60 B 61 B 62 B 63 B 64 B 65 B 66 B 67 B 68 B 69 B 69,5 B 70 B 71 B 72 B 73 B 74 B 75 B 76 B 77 B 78 B 79 B 80 B 81 B 82 B 83 B 83.5 B 84 B 85 B 86 B 86.5 B 88 B 89 B 90 B 91 B 92 B 93 B 94 B 94.5 B 95 B 96.5 B 97 B 98 B 99 B 100 B 101 B 102 B 103 B 104 B 105 B 106 B 108 B 109 B 110 B 111 B 112 B 114 B 115 B 116 B 118 B 120 B 122 B 124 B 125 B 126

V-belts CONTI-V№Бе STANDARD Multiflex Wrapped V-belts

Section 17/B Ref.

Ld (mm)

6516325 6591330 6516335 6591338 6591340 6516345 6591350 6516355 6791358 6591360 6516366 6591370 6516375 6591381 6591385 6591386 6591391 6591395 6516400 6591411 6591417 6516420 6516425 6591427 6591432 6516439 6591445 6516450 6716457 6791470 6716475 6791488 6791495 6756050 6756065 6756053 6791054 6756055 6756056 6791058 6756060 6791061 6756069 6756063 6791065 6756067 6791070 6756071 6756066 6756068

3290 3350 3400 3420 3450 3500 3550 3600 3620 3650 3700 3740 3800 3850 3890 3900 3950 3990 4060 4160 4210 4250 4300 4310 4360 4430 4500 4540 4610 4740 4790 4920 5000 5040 5140 5340 5370 5540 5640 5780 6040 6070 6140 6340 6540 6750 7050 7150 8430 8810

Section 20/Ref.

Ld (mm)

Ld (inch)

6741090 6741101 6741106 6741112 6741118 6741121 6741125 6741128 6741132 6741140 6741145 6741150 6741160 6741166 6741171

948 1048 1108 1168 1228 1263 1298 1323 1368 1448 1498 1548 1648 1708 1748

37.32 41.26 43.62 45.98 48.35 49.72 51.10 52.09 53.86 57.01 58.98 60.94 64.88 67.24 68.82

Ld (inch) 129.53 131.89 133.86 134.65 135.83 137.80 139.76 141.73 142.52 143.70 145.67 147.24 149.61 151.57 153.15 153.54 155.51 157.09 159.84 163.78 165.75 167.32 169.29 169.68 171.65 174.41 177.17 178.74 181.50 186.61 188.58 193.70 196.85 198.42 202.36 210.24 211.42 218.11 222.05 227.56 237.80 238.98 241.73 249.61 257.48 265.75 277.56 281.50 331.89 346.85

Li (mm)

Li (inch)

RMA

127.95 130.00 131.89 132.99 134.02 135.83 137.99 139.76 140.98 141.73 144.02 145.67 147.64 150.00 151.57 152.01 154.02 155.51 157.48 162.01 164.02 165.35 167.32 167.99 170.00 172.99 175.20 177.17 180.00 185.00 187.01 192.01 195.00 196.85 200.79 208.66 210.00 216.54 220.47 225.98 236.22 237.99 240.00 248.03 255.91 263.78 275.59 279.53 330.00 345.00

B 128 B 130 B 132 B 133 B 134 B 136 B 138 B 140 B 141 B 142 B 144 B 146 B 148 B 150 B 151.5 B 152 B 154 B 156 B 158 B 162 B 164 B 165 B 167 B 168 B 170 B 173 B 175 B 177 B 180 B 185 B 187 B 192 B 195 B 197 B 200 B 209 B 210 B 217 B 220 B 226 B 236 B 238 B 240 B 248 B 256 B 264 B 276 B 280 B 330 B 345

Li (mm)

Li (inch)

RMA

900 1000 1060 1120 1180 1215 1250 1275 1320 1400 1450 1500 1600 1660 1700

35.43 39.37 41.73 44.09 46.46 47.83 49.21 50.20 51.97 55.12 57.09 59.06 62.99 65.35 66.93

3250 3302 3350 3378 3404 3450 3505 3550 3581 3600 3658 3700 3750 3810 3850 3861 3912 3950 4000 4115 4166 4200 4250 4267 4318 4394 4450 4500 4572 4699 4750 4877 4953 5000 5100 5300 5334 5500 5600 5740 6000 6045 6096 6300 6500 6700 7000 7100 8382 8763

Section 20/Ref.

Ld (mm)

6741190 6741195 6741200 6741206 6741212 6741224 6741236 6741250 6741265 6721280 6721300 6721315 6721335 6721355 6721375 6721400 6721425 6721450 6761050 6761053 6761055 6761056 6761060 6761071 6761080

1948 1998 2048 2108 2168 2308 2408 2548 2698 2848 3048 3198 3398 3598 3798 4048 4298 4548 5048 5348 5548 5648 6048 7148 8048

Section 22/C Ref.

Ld (mm)

Ld (inch)

Li (mm)

Li (inch)

RMA

6742109 6792120 6742122 6742125 6792127 6742129 6742132 6742135 6742140 6792142 6792145 6792147 6742150 6742151 6742155 6742160 6422000 6792165 6792168 6742170 6742173 6792175 6792178 6742180 6792183 6792185 6792188 6742190 6792193 6792196 6792197 6742200 6792203 6742206 6742212 6792213 6742216 6792218 6742224 6792226

1150 1260 1275 1300 1320 1350 1380 1410 1450 1480 1510 1530 1560 1580 1600 1650 1680 1700 1730 1760 1780 1810 1830 1860 1880 1910 1940 1950 1980 2010 2030 2060 2090 2110 2180 2190 2200 2240 2300 2320

45.28 49.61 50.20 51.18 51.97 53.15 54.33 55.51 57.09 58.27 59.45 60.24 61.42 62.20 62.99 64.96 66.14 66.93 68.11 69.29 70.08 71.26 72.05 73.23 74.02 75.20 76.38 76.77 77.95 79.13 79.92 81.10 82.28 83.07 85.83 86.22 86.61 88.19 90.55 91.34

1090 1200 1220 1250 1270 1295 1320 1350 1400 1425 1450 1475 1500 1524 1550 1600 1625 1650 1676 1700 1727 1750 1778 1800 1829 1854 1880 1900 1930 1956 1981 2000 2032 2057 2120 2135 2159 2184 2240 2261

42.91 47.24 48.03 49.21 50.00 50.98 51.97 53.15 55.12 56.10 57.09 58.07 59.06 60.00 61.02 62.99 63.98 64.96 65.98 66.93 67.99 68.90 70.00 70.87 72.01 72.99 74.02 74.80 75.98 77.01 77.99 78.74 80.00 80.98 83.46 84.06 85.00 85.98 88.19 89.02

C 43 C 47 C 48 C 49 C 50 C 51 C 52 C 53 C 55 C 56 C 57 C 58 C 59 C 60 C 61 C 63 C 64 C 65 C 66 C 67 C 68 C 69 C 70 C 71 C 72 C 73 C 74 C 75 C 76 C 77 C 78 C 79 C 80 C 81 C 83.5 C 84 C 85 C 86 C 88 C 89

Ld (inch) 76.69 78.66 80.63 82.99 85.35 90.87 94.80 100.31 106.22 112.13 120.00 125.91 133.78 141.65 149.53 159.37 169.21 179.06 198.74 210.55 218.43 222.36 238.11 281.42 316.85

Li (mm) 1900 1950 2000 2060 2120 2240 2360 2500 2650 2800 3000 3150 3350 3550 3750 4000 4250 4500 5000 5300 5500 5600 6000 7100 8000

Li (inch)

RMA

74.80 76.77 78.74 81.10 83.46 88.19 92.91 98.43 104.33 110.24 118.11 124.02 131.89 139.76 147.64 157.48 167.32 177.17 196.85 208.66 216.54 220.47 236.22 279.53 314.96

29

V-belts CONTI-V STANDARD Multiflex Wrapped V-belts

Section 22/C Ref.

Ld (mm)

6742229 6742236 6792239 6792241 6792244 6742245 6792246 6742250 6792252 6792254 6742256 6792259 6792262 6792264 6722267 6722268 6792275 6722280 6792282 6722284 6722290 6792295 6722297 6722300 6792303 6722305 6792310 6722315 6792320 6722325 6792330 6722335 6792340 6722346 6792350 6722355 6792361 6722366 6792370 6722375 6792385 6792391 6722400 6722402 6792406 6722412 6792422 6792425 6722439 6722450 6792454 6722457 6792470 6722475 6792483 6792495 6762050 6792051 6792052 6762053 6792053 6762055 6762056 6792056 6762057 6792058 6762058 6762060

2340 2420 2440 2470 2490 2510 2520 2550 2570 2600 2620 2650 2670 2700 2720 2740 2800 2850 2880 2900 2950 3000 3030 3050 3080 3100 3150 3210 3260 3310 3360 3410 3460 3520 3560 3610 3660 3710 3760 3820 3920 3960 4060 4080 4120 4170 4270 4300 4450 4550 4600 4630 4750 4810 4880 5010 5060 5180 5240 5350 5380 5550 5650 5690 5750 5770 5850 6050

30

Ld (inch) 92.13 95.28 96.06 97.24 98.03 98.82 99.21 100.39 101.18 102.36 103.15 104.33 105.12 106.30 107.09 107.87 110.24 112.20 113.39 114.17 116.14 118.11 119.29 120.08 121.26 122.05 124.02 126.38 128.35 130.31 132.28 134.25 136.22 138.58 140.16 142.13 144.09 146.06 148.03 150.39 154.33 155.91 159.84 160.63 162.20 164.17 168.11 169.29 175.20 179.13 181.10 182.28 187.01 189.37 192.13 197.24 199.21 203.94 206.30 210.63 211.81 218.50 222.44 224.02 226.38 227.17 230.31 238.19

Li (mm) 2286 2360 2388 2413 2438 2450 2464 2500 2525 2540 2560 2591 2616 2642 2670 2685 2750 2800 2819 2840 2900 2950 2965 3000 3030 3050 3099 3150 3200 3250 3302 3350 3404 3454 3505 3550 3607 3658 3700 3750 3850 3912 4000 4020 4064 4115 4216 4250 4390 4500 4540 4572 4699 4750 4826 4953 5000 5131 5182 5300 5334 5500 5600 5639 5700 5715 5800 6000

Li (inch)

RMA

90.00 92.91 94.02 95.00 95.98 96.46 97.01 98.43 99.41 100.00 100.79 102.01 102.99 104.02 105.12 105.71 108.27 110.24 110.98 111.81 114.17 116.14 116.73 118.11 119.29 120.08 122.01 124.02 125.98 127.95 130.00 131.89 134.02 135.98 137.99 139.76 142.01 144.02 145.67 147.64 151.57 154.02 157.48 158.27 160.00 162.01 165.98 167.32 172.83 177.17 178.74 180.00 185.00 187.01 190.00 195.00 196.85 202.01 204.02 208.66 210.00 216.54 220.47 222.01 224.41 225.00 228.35 236.22

C 90 C 93 C 94 C 95 C 96 C 96.5 C 97 C 98 C 99 C 100 C 101 C 102 C 103 C 104 C 105 C 106 C 108 C 110 C 111 C 112 C 114 C 116 C 117 C 118 C 119 C 120 C 122 C 124 C 126 C 128 C 130 C 132 C 134 C 136 C 138 C 140 C 142 C 144 C 146 C 148 C 152 C 154 C 158 C 158.5 C 160 C 162 C 166 C 167 C 173 C 177 C 179 C 180 C 185 C 187 C 190 C 195 C 197 C 202 C 204 C 209 C 210 C 217 C 220 C 222 C 224 C 225 C 228 C 236

Section 22/C Ref.

Ld (mm)

6792060 6792061 6762062 6762063 6792064 6762067 6792068 6792069 6792070 6762071 6762075 6792076 6792077 6762080 6762084 6792087 6792091

6100 6150 6250 6360 6400 6760 6860 6910 7060 7170 7550 7620 7700 8060 8430 8820 9200

Section 25/Ref.

Ld (mm)

6743140 6743150 6743170 6743180 6743189 6743195 6743200 6743205 6743212 6743220 6743224 6743225 6743250 6723266 6723265 6723280 6723300 6723315 6723325 6723335 6723355 6723375 6723400 6723425 6723450 6723475 6763050 6763053 6763056 6763060 6763063 6763067 6763071 6763075 6763080 6763085 6763090

1461 1561 1761 1861 1961 2011 2061 2111 2181 2261 2301 2511 2561 2601 2711 2861 3061 3211 3311 3411 3611 3811 4061 4311 4561 4811 5061 5361 5661 6061 6361 6761 7161 7561 8061 8561 9061

Ld (inch) 240.16 242.13 246.06 250.39 251.97 266.14 270.08 272.05 277.95 282.28 297.24 300.00 303.15 317.32 331.89 347.24 362.20

Ld (inch) 57.52 61.46 69.33 73.27 77.20 79.17 81.14 83.11 85.87 89.02 90.59 98.86 100.83 102.40 106.73 112.64 120.51 126.42 130.35 134.29 142.17 150.04 159.88 169.72 179.57 189.41 199.25 211.06 222.87 238.62 250.43 266.18 281.93 297.68 317.36 337.05 356.73

Li (mm) 6045 6096 6200 6300 6350 6700 6807 6858 7010 7100 7500 7569 7650 8000 8382 8765 9144

Li (mm) 1400 1500 1700 1800 1900 1950 2000 2050 2120 2200 2240 2450 2500 2540 2650 2800 3000 3150 3250 3350 3550 3750 4000 4250 4500 4750 5000 5300 5600 6000 6300 6700 7100 7500 8000 8500 9000

Li (inch)

RMA

237.99 240.00 244.09 248.03 250.00 263.78 267.99 270.00 275.98 279.53 295.28 297.99 301.18 314.96 330.00 345.08 360.00

C 238 C 240 C 244 C 248 C 250 C 264 C 268 C 270 C 276 C 280 C 295 C 298 C 301 C 315 C 330 C 345 C 360

Li (inch)

RMA

55.12 59.06 66.93 70.87 74.80 76.77 78.74 80.71 83.46 86.61 88.19 96.46 98.43 100.00 104.33 110.24 118.11 124.02 127.95 131.89 139.76 147.64 157.48 167.32 177.17 187.01 196.85 208.66 220.47 236.22 248.03 263.78 279.53 295.28 314.96 334.65 354.33

Intermediate lengths and minimum purchase quantities available on request.

V-belts CONTI-V№Бе STANDARD Multiflex Wrapped V-belts

Section 32/D Ref. 6793200 6724212 6793236 6724250 6724265 6793267 6724280 6724300 6793305 6724315 6793325 6724335 6793342 6724316 6724355 6793366 6724375 6793381 6724317 6724394 6724400 6724322 6793411 6724425 6793439 6724450 6793457 6724320 6724475 6793482 6793495 6764050 6793051 6793052 6764053 6793054 6764056 6793057 6793058 6764058 6764060 6793061 6793062 6764063 6764067 6793068 6793069 6764071 6724318 6764075 6793076 6793077 6764080 6793083 6764085 6724319 6764090 6793091 6764095 6793097 6793100 6764100 6793101 6724202 6764112 6793121 6764125

Ld (mm)

Ld (inch)

Li (mm)

Li (inch)

RMA

2080 2200 2440 2560 2720 2740 2870 3070 3130 3230 3330 3430 3500 3530 3630 3730 3830 3890 3990 4020 4080 4160 4190 4320 4470 4570 4650 4700 4830 4900 5030 5080 5260 5330 5360 5400 5660 5790 5870 5930 6070 6120 6170 6370 6780 6890 6940 7190 7490 7590 7650 7700 8080 8460 8580 8840 9070 9170 9580 9830 9980 10080 10700 10780 11280 12220 12580

81.89 86.61 96.06 100.79 107.09 107.87 112.99 120.87 123.23 127.17 131.10 135.04 137.80 138.98 142.91 146.85 150.79 153.15 157.09 158.27 160.63 163.78 164.96 170.08 175.98 179.92 183.07 185.04 190.16 192.91 198.03 200.00 207.09 209.84 211.02 212.60 222.83 227.95 231.10 233.46 238.98 240.94 242.91 250.79 266.93 271.26 273.23 283.07 294.88 298.82 301.18 303.15 318.11 333.07 337.79 348.03 357.09 361.02 377.17 387.01 392.91 396.85 421.26 424.41 444.09 481.10 495.28

2000 2120 2360 2500 2650 2670 2800 3000 3048 3150 3250 3350 3425 3450 3550 3658 3750 3810 3910 3940 4000 4075 4115 4250 4394 4500 4572 4620 4750 4826 4953 5000 5182 5258 5300 5330 5600 5715 5791 5850 6000 6045 6096 6300 6700 6807 6858 7100 7417 7500 7569 7620 8000 8382 8500 8760 9000 9093 9500 9754 9906 10000 10617 10700 11200 12141 12500

78.74 83.46 92.91 98.43 104.33 105.12 110.24 118.11 120.00 124.02 127.95 131.89 134.84 135.83 139.76 144.02 147.64 150.00 153.94 155.12 157.48 160.43 162.01 167.32 172.99 177.17 180.00 181.89 187.01 190.00 195.00 196.85 204.02 207.01 208.66 209.84 220.47 225.00 227.99 230.31 236.22 237.99 240.00 248.03 263.78 267.99 270.00 279.53 292.01 295.28 297.99 300.00 314.96 330.00 334.65 344.88 354.33 357.99 374.02 384.02 390.00 393.70 417.99 421.26 440.94 477.99 492.13

D 79 D 83 D 93 D 98 D 104 D 105 D 110 D 118 D 120 D 124 D 128 D 132 D 135 D 136 D 140 D 144 D 148 D 150 D 154 D 155 D 158 D 160 D 162 D 167 D 173 D 177 D 180 D 182 D 187 D 190 D 195 D 197 D 204 D 207 D 209 D 210 D 220 D 225 D 228 D 230 D 236 D 238 D 240 D 248 D 264 D 268 D 270 D 280 D 292 D 295 D 298 D 300 D 315 D 330 D 335 D 345 D 354 D 358 D 374 D 384 D 390 D 394 D 418 D 421 D 441 D 478 D 492

Section 40/E Ref. 6765050 6765056 6765071 6765080 6765090 6765100 6765101

Ld (mm)

Ld (inch)

Li (mm)

Li (inch)

RMA

5080 5670 7190 8080 9070 10090 11280

200.00 223.23 283.07 318.11 357.09 397.24 444.09

5000 5600 7100 8000 9000 10000 11200

196.85 220.47 279.53 314.96 354.33 393.70 440.94

E 197 E 220 E 280 E 315 E 354 E 394 E 441

31

V-belts

CONTI-V® STANDARD Ultraflex Narrow-section wrapped V-belts, DIN 7753 and BS 3790 Features – Moderately oil-resistant – Resistant to temperatures from –55 °C up to +70 °C – Electrically conductive (antistatic) to ISO 1813 – Insensitive to dust – Suitable for tropical climates

Section

bo (mm)

bo (inch)

h (mm)

h (inch)

SPZ SPA SPB 19 SPC

9.7 12.7 16.3 18.6 22

0.38 0.50 0.64 0.73 0.87

8 10 13 15.7 18

0.31 0.39 0.51 0.62 0.71

L=L

from 1000 mm upwards

The datum length Ld according to DIN / ISO. corresponds to the pitch length Lp.

Bundle sizes Section SPZ

Ld up to 1937 2360 3550

Pieces 25 10 5

Section SPC

Ld up to 3550 9500 12000

Pieces 10 3 2

Section SPZ Ref. Ld (mm) 6571053 512 6571058 562 6571060 587 6571063 612 6571301 630 6571065 637 6571068 662 6571067 670 6571064 672 6571069 677 6571070 687 6571371 697 6571365 710 6571071 722 6571075 737 6571077 750 6571078 758 6571079 762 6571076 772 6571080 787 6571081 800 6571083 812 6571386 825 6571085 837 6571363 850 6571088 862 6571387 875 6571090 887 6571303 900 6571094 912 6571089 922 6571091 927 6571095 937 6571096 947 6571390 950 6571092 957 6571296 962 6571389 967 6571376 970 6571100 987 6571017 994 6571304 1000

32

Ld (inch) 20.16 22.13 23.11 24.09 24.80 25.08 26.06 26.38 26.46 26.65 27.05 27.44 27.95 28.43 29.02 29.53 29.84 30.00 30.39 30.98 31.50 31.97 32.48 32.95 33.46 33.94 34.45 34.92 35.43 35.91 36.30 36.50 36.89 37.28 37.40 37.68 37.87 38.07 38.19 38.86 39.13 39.37

Section SPA

Ld up to 1957 2482 4500

Section SPZ Ref. Ld (mm) 6571103 1012 6571104 1024 6571105 1037 6571106 1047 6571108 1060 6571409 1077 6571110 1087 6571113 1112 6571305 1120 6571424 1127 6571115 1137 6571302 1147 6571118 1162 6571119 1171 6571306 1180 6571120 1187 6571422 1202 6571123 1212 6571327 1222 6571125 1237 6571307 1250 6771128 1262 6795129 1270 6571130 1287 6571133 1312 6571308 1320 6571134 1330 6571135 1337 6571136 1347 6571138 1362 6571140 1387 6571309 1400 6571143 1412 6795144 1420 6571145 1437 6571148 1462 6571150 1487 6571310 1500 6571153 1512 6595153 1520 6571155 1537 6571158 1562

Pieces 25 10 5

Ld (inch) 39.84 40.31 40.83 41.22 41.73 42.40 42.80 43.78 44.09 44.37 44.76 45.16 45.75 46.10 46.46 46.73 47.32 47.72 48.11 48.70 49.21 49.69 50.00 50.67 51.65 51.97 52.36 52.64 53.03 53.62 54.61 55.12 55.59 55.91 56.57 57.56 58.54 59.06 59.53 59.84 60.51 61.50

Section SPB

Ld up to 1900 3550

Section SPZ Ref. Ld (mm) 6571160 1587 6571311 1600 6571163 1612 6571165 1637 6595166 1650 6571168 1662 6571170 1687 6571316 1700 6571173 1712 6571175 1737 6571178 1762 6571180 1787 6571181 1800 6571183 1812 6571185 1837 6571186 1850 6595187 1862 6571190 1887 6571317 1900 6571195 1937 6571200 1987 6571314 2000 6595204 2030 6571205 2037 6571210 2087 6571318 2120 6595215 2137 6595217 2160 6571220 2187 6571319 2240 6571227 2262 6595229 2280 6571230 2287 6571231 2360 6595242 2410 6595245 2437 6571250 2487 6571321 2500 6595255 2540 6571326 2637 6571322 2650 6595270 2690

Pieces 10 5

Ld (inch) 62.48 62.99 63.46 64.45 64.96 65.43 66.42 66.93 67.40 68.39 69.37 70.35 70.87 71.34 72.32 72.83 73.31 74.29 74.80 76.26 78.23 78.74 79.92 80.20 82.17 83.46 84.13 85.04 86.10 88.19 89.06 89.76 90.04 92.91 94.88 95.94 97.91 98.43 100.00 103.82 104.33 105.91

Section 19

Ld up to 1900 4475

Pieces 10 5

Section SPZ Ref. Ld (mm) 6571323 2800 6595285 2840 6571324 3000 6571325 3150 6595318 3170 6571330 3350 6571331 3550

Ld (inch) 110.24 111.81 118.11 124.02 124.80 131.89 139.76

Section SPA Ref. Ld (mm) 6572067 647 6572073 707 6572075 732 6572078 757 6572080 782 6572040 800 6572081 807 6572085 832 6572041 850 6572088 857 6572090 882 6572042 900 6572093 907 6572043 925 6572095 932 6572092 950 6572094 957 6572091 967 6572100 982 6572044 1000 6572103 1007 6572105 1032 6572104 1042 6572107 1057 6572108 1060 6572110 1082 6572045 1100 6572113 1107 6572114 1120 6572116 1127 6572115 1132 6572118 1157

Ld (inch) 25.47 27.83 28.82 29.80 30.79 31.50 31.77 32.76 33.46 33.74 34.72 35.43 35.71 36.42 36.69 37.40 37.68 38.07 38.66 39.37 39.65 40.63 41.02 41.61 41.73 42.60 43.31 43.58 44.09 44.37 44.57 45.55

V-belts CONTI-V№Бе STANDARD Ultraflex Wrapped V-belts

Section SPA Ref. Ld (mm) 6572046 1175 6572120 1180 6572123 1207 6572047 1225 6572125 1232 6572048 1250 6572128 1257 6572129 1272 6572130 1282 6572049 1300 6572133 1307 6572132 1320 6572135 1332 6572138 1357 6596139 1367 6572050 1375 6572140 1382 6572051 1400 6572143 1407 6572052 1425 6572145 1432 6572148 1457 6572150 1482 6572053 1500 6572153 1507 6572054 1525 6572155 1532 6572157 1557 6572160 1582 6572055 1600 6572163 1607 6572165 1632 6572168 1657 6572056 1675 6572170 1682 6572057 1700 6572173 1707 6572175 1732 6572176 1757 6572180 1782 6572058 1800 6572183 1807 6572185 1832 6572188 1857 6572190 1882 6572059 1900 6572193 1907 6572060 1925 6572195 1932 6572194 1957 6572200 1982 6572201 2000 6572202 2007 6572205 2032 6572208 2057 6572210 2082 6572062 2120 6572215 2132 6572220 2182 6596222 2207 6572224 2227 6572225 2232 6572226 2240 6572230 2282 6572063 2300 6572233 2307 6572235 2332 6572238 2357

Ld (inch) 46.26 46.46 47.52 48.23 48.50 49.21 49.49 50.08 50.47 51.18 51.46 51.97 52.44 53.43 53.82 54.13 54.41 55.12 55.39 56.10 56.38 57.36 58.35 59.06 59.33 60.04 60.31 61.30 62.28 62.99 63.27 64.25 65.24 65.94 66.22 66.93 67.20 68.19 69.17 70.16 70.87 71.14 72.13 73.11 74.09 74.80 75.08 75.79 76.06 77.05 78.03 78.74 79.02 80.00 80.98 81.97 83.46 83.94 85.91 86.89 87.68 87.87 88.19 89.84 90.55 90.83 91.81 92.80

Section SPA Ref. Ld (mm) 6572239 2360 6572241 2382 6572245 2432 6572065 2475 6572250 2482 6572251 2500 6572255 2532 6572260 2582 6572263 2607 6572265 2632 6572266 2650 6572270 2682 6572275 2732 6572280 2782 6572281 2800 6572285 2832 6572286 2847 6572290 2882 6572295 2932 6572300 2982 6572301 3000 6572305 3032 6572310 3082 6572311 3150 6596320 3182 6572330 3282 6572336 3350 6572341 3550 6472000 3650 6572344 3750 6572342 4000 6596427 4250 6572343 4500

Ld (inch) 92.91 93.78 95.75 97.44 97.72 98.43 99.69 101.65 102.64 103.62 104.33 105.59 107.56 109.53 110.24 111.50 112.09 113.46 115.43 117.40 118.11 119.37 121.34 124.02 125.28 129.21 131.89 139.76 143.70 147.64 157.48 167.32 177.17

Section SPB Ref. Ld (mm) 6774127 1250 6774134 1320 6797136 1340 6674000 1360 6774142 1400 6797143 1410 6774143 1450 6774144 1472 6574153 1500 6574046 1550 6574162 1600 6474000* 1650 6574172 1700 6574180 1778 6574182 1800 6574188 1860 6574192 1900 6574193 1950 6574202 2000 6597203 2020 6574050 2060 6574212 2098 6574214 2120 6597217 2150 6574040 2180 6574226 2240 6574228 2264 6597230 2280 6574230 2310 6574238 2360 6574241 2391 6597243 2410

Ld (inch) 49.21 51.97 52.76 53.54 55.12 55.51 57.09 57.95 59.06 61.02 62.99 64.96 66.93 70.00 70.87 73.23 74.80 76.77 78.74 79.53 81.10 82.60 83.46 84.65 85.83 88.19 89.13 89.76 90.94 92.91 94.13 94.88

Section SPB Ref. Ld (mm) 6474000 2430 6574252 2500 6574253 2518 6597255 2530 6574267 2650 6597270 2680 6474000* 2720 6574282 2800 6597286 2840 6574036 2900 6597301 2990 6574302 3000 6574309 3070 6574317 3150 6597319 3170 6574327 3250 6574337 3350 6474000 3450 6574357 3550 6574302 3650 6574377 3750 6597382 3800 6474000 3870 6574402 4000 6597408 4060 6574427 4250 6597433 4310 6574452 4500 6597458 4560 6674000 4620 6774453 4750 6597484 4820 6774145 4842 6774502 5000 6774503 5058 6797509 5070 6774532 5300 6797540 5380 6774562 5600 6797570 5680 6774602 6000 6774061 6300 6797064 6340 6774563 6500 6774672 6700 6774571 7100 6774575 7500 6774580 8000

Ld (inch) 95.67 98.43 99.13 99.61 104.33 105.51 107.09 110.24 111.81 114.17 117.72 118.11 120.87 124.02 124.80 127.95 131.89 135.83 139.76 143.70 147.64 149.61 152.36 157.48 159.84 167.32 169.69 177.17 179.53 181.89 187.01 189.76 190.63 196.85 199.13 199.61 208.66 211.81 220.47 223.62 236.22 248.03 249.61 255.91 263.78 279.53 295.28 314.96

Section 19 Ref. 6773125 6773150 6773162 6773170 6773175 6773190 6773192 6773215 6773250 6773251 6773270 6773282 6743238 6773450

Ld (inch) 55.12 58.07 62.99 65.94 68.90 73.82 74.80 83.46 97.44 98.43 105.31 110.24 158.46 176.18

Ld (mm) 1400 1475 1600 1675 1750 1875 1900 2120 2475 2500 2675 2800 4025 4475

Section SPC Ref. 6575203 6575212 6575227 6575239 6575253 6575268 6575283 6575303 6575318 6575338 6575358 6575378 6575403 6575428 6575453 6775478 6775503 6775508 6775563 6775504 6775630 6775505 6775506 6775511 6775507 6775510 6775564 6775509 6775560 6775211 6775567 6775565 6775566 6775568

Ld (mm) 2000 2120 2240 2360 2500 2650 2800 3000 3150 3350 3550 3750 4000 4250 4500 4750 5000 5300 5600 6000 6300 6700 7100 7500 8000 8500 9000 9500 10000 10600 11200 12000 12250 12500

Ld (inch) 78.74 83.46 88.19 92.91 98.43 104.33 110.24 118.11 124.02 131.89 139.76 147.64 157.48 167.32 177.17 187.01 196.85 208.66 220.47 236.22 248.03 263.78 279.53 295.28 314.96 334.65 354.33 374.02 393.70 417.32 440.94 472.44 482.28 492.13

Intermediate lengths and minimum purchase quantities available on request.

33

V-belts

CONTI-V ADVANCE FO®-Z Heavy-duty cogged raw edge V-belts, DIN 7753

Features – Moderately oil-resistant – Resistant to temperatures from –30 °C up to +80 °C – Electrically conductive (antistatic) to ISO 1813 – Insensitive to dust – Suitable for tropical climates

Section XPZ

Section XPZ Ref. 6577130 6577131 6577003 6577132 6577133 6577006 6577135 6577008 6577136 6577011 6577137 6577138 6577015 6577140 6577141 6577019 6577143 6577144 6577023 6577146 6577147 6577027 6577149 6577150 6577031 6577302 6577035 6577303 6577039 6577304 6577305 6577043 6577306 6577307 6577048 6577308 6577309 6577054 6577310 6577311 6577312 6577060 6577313 6577314 6577315 6577067 6577316

34

Ld up to 1950 2360 3500

Pieces 25 10 5

Section XPA

Ld (mm) 590 610 630 640 660 670 690 710 730 750 760 780 800 820 830 850 860 880 900 910 930 950 960 980 1000 1030 1060 1090 1120 1140 1150 1180 1210 1230 1250 1280 1300 1320 1340 1360 1380 1400 1430 1450 1480 1500 1530

Section

bo (mm)

bo (inch)

h (mm)

h (inch)

XPZ XPA XPB XPC

10 13 16.3 22

0.39 0.51 0.64 0.87

8 9 13 17

0.31 0.35 0.51 0.67

Ld up to 1950 2360 3550

Ld (inch) 23.23 24.02 24.80 25.20 25.98 26.38 27.17 27.95 28.74 29.53 29.92 30.71 31.50 32.28 32.68 33.46 33.86 34.65 35.43 35.83 36.61 37.40 37.80 38.58 39.37 40.55 41.73 42.91 44.09 44.88 45.28 46.46 47.64 48.43 49.21 50.39 51.18 51.97 52.76 53.54 54.33 55.12 56.30 57.09 58.27 59.06 60.24

Pieces 25 10 5

RMA

Section XPB

Section XPZ Ref. 6577317 6577318 6577072 6577319 6577320 6577321 6577075 6577322 6577077 6577323 6577079 6577324 6577081 6577082 6577083 6577084 6577085 6577086 6577087 6577088 6577089 6577090 6577091

Section XPA Ref. 6577151 6577152 6577153 6577154 6577155 6577156 6577157 6577158 6577159 6577160 6577161 6577162 6577211 6577164 6577165 6577215 6577167 6577168 6577220 6577170

Ld up to 1900 3550

L=L

from 1000 mm upwards

The datum length Ld according to DIN / ISO, corresponds to the pitch length Lp.

Pieces 10 5

Section XPC

Ld (mm) 1550 1580 1600 1630 1650 1680 1700 1750 1800 1850 1900 1950 2000 2120 2240 2360 2500 2650 2800 3000 3150 3350 3550

Ld (mm) 590 610 630 640 660 670 690 710 730 750 760 780 800 820 830 850 860 880 900 910

Ld up to 3500

Ld (inch)

Pieces 5

RMA

61.02 62.20 62.99 64.17 64.96 66.14 66.93 68.90 70.87 72.83 74.80 76.77 78.74 83.46 88.19 92.91 98.43 104.33 110.24 118.11 124.02 131.89 139.76

Ld (inch) 23.23 24.02 24.80 25.20 25.98 26.38 27.17 27.95 28.74 29.53 29.92 30.71 31.50 32.28 32.68 33.46 33.86 34.65 35.43 35.83

RMA

V-belts CONTI-V ADVANCE FO№Бе-Z Heavy-duty cogged raw edge V-belts

Section XPA Ref. 6577171 6577223 6577173 6577174 6577227 6577350 6577232 6577351 6577237 6577352 6577353 6577242 6577354 6577355 6577248 6577356 6577357 6577254 6577358 6577359 6577360 6577261 6577361 6577362 6577363 6577267 6577364 6577365 6577366 6577272 6577367 6577368 6577369 6577276 6577370 6577278 6577371 6577280 6577372 6577282 6577293 6577283 6577284 6577285 6577286 6577287 6577288 6577289 6577290 6577291 6577292

Ld (mm) 930 950 960 980 1000 1030 1060 1090 1120 1140 1150 1180 1210 1230 1250 1280 1300 1320 1340 1360 1380 1400 1430 1450 1480 1500 1530 1550 1580 1600 1630 1650 1680 1700 1750 1800 1850 1900 1950 2000 2082 2120 2240 2360 2500 2650 2800 3000 3150 3350 3550

Ld (inch) 36.61 37.40 37.80 38.58 39.37 40.55 41.73 42.91 44.09 44.88 45.28 46.46 47.64 48.43 49.21 50.39 51.18 51.97 52.76 53.54 54.33 55.12 56.30 57.09 58.27 59.06 60.24 61.02 62.20 62.99 64.17 64.96 66.14 66.93 68.90 70.87 72.83 74.80 76.77 78.74 81.97 83.46 88.19 92.91 98.43 104.33 110.24 118.11 124.02 131.89 139.76

RMA

Section XPB Ref. 6577400 6577401 6577402 6570038 6577403 6570113 6577404 6577405 6577944 6577406 6577407 6570189 6577408 6577176 6577177 6577409 6577410 6577948 6577411 6577666 6577412 6577413 6577414 6577415 6577416 6577417 6577418

Section XPC Ref. 6577450 6577451 6577452 6577453 6577454 6577455 6577456 6577457 6577458 6577459 6577460

Ld (mm) 1250 1320 1400 1450 1500 1550 1600 1700 1750 1800 1900 1950 2000 2060 2100 2120 2240 2280 2360 2410 2500 2650 2800 3000 3150 3350 3550

Ld (mm) 2000 2120 2240 2360 2500 2650 2800 3000 3150 3350 3550

Ld (inch)

RMA

49.21 51.97 55.12 57.09 59.06 61.02 62.99 66.93 68.90 70.87 74.80 76.77 78.74 81.10 82.67 83.46 88.19 89.76 92.91 94.88 98.43 104.33 110.24 118.11 124.02 131.89 139.76

Ld (inch)

RMA

78.74 83.46 88.19 92.91 98.43 104.33 110.24 118.11 124.02 131.89 139.76

* Available on demand

35

V-belts

CONTI-V ADVANCE FO®-Z Classic Heavy-duty cogged raw edge V-belts, DIN 2215

Section

Features – Moderately oil-resistant – Resistant to temperatures from –30 °C up to +80 °C – Insensitive to dust – Suitable for tropical climates

bo (mm)

bo (inch)

5/6/Y 8/10/Z 13/A

5 6 8 10 13

0.20 0.24 0.31 0.39 0.51

Li up to 900

Pieces 100

h (mm) 3 4 5 6 8

h (inch)

N: Plain Version Non-cogged

0.12 0.16 0.20 0.24 0.31

Li: Inner length Section 5/-

Li up to 600

Pieces 100

Section 13/A

Li up to 787

Pieces 25

Section 5/Ref. 6531161 6531118 6531119 6531123 6531124 6531125 6531126 6531175 6531162 6531129 6531163 6531120 6531164 6531165 6531121 6531166 6531176 6531136 6531139 6531167 6531135 6531168 6531169 6531140 6531142 6531170 6531145 6531141 6531171 6531148 6531149 6531147 6531151 6531150 6531156 6531172 6531155 6531173 6531174

* Available on demand

36

Section 6/Y

Li (mm) 160 185 N 190 N 229 N 236 N 260 N 265 N 270 280 287 N 300 303 N 315 322 330 N 335 340 345 N 350 N 352 358 N 375 400 406 N 420 N 425 435 N 441 N 450 465 N 471 N 475 N 495 N 500 N 514 N 530 554 N 560 600

Li (inch) 6.30 7.28 N 7.48 N 9.02 N 9.29 N 10.24 N 10.43 N 10.63 N 11.02 N 11.30 N 11.81 N 11.93 N 12.40 N 12.68 N 12.99 N 13.19 N 13.39 N 13.58 N 13.78 N 13.86 N 14.09 N 14.76 N 15.75 N 15.98 N 16.54 N 16.73 N 17.13 N 17.36 N 17.72 N 18.31 N 18.54 N 18.70 N 19.49 N 19.69 N 20.24 N 20.87 21.81 N 22.05 23.62

RMA

Section 8/-

Section 6/Y Ref. 6532124 6532122 6532126 6532127 6532113 6532100 6532101 6532102 6532131 6532133 6532103 6532114 6532135 6532136 6532104 6532138 6532105 6532139 6532106 6532107 6532108 6532116 6532150 6532109 6532154 6532156 6532110 6532158 6532111 6532164 6532112 6532190

Section 8/Ref. 6533166 6533129 6533167 6533130 6533168 6533132 6533169 6533136 6533141 6533143

Li up to 800

Pieces 25

Section 10/Z

Li (mm) 240 N 250 N 260 N 265 N 270 280 300 315 320 N 330 N 335 339 339 N 350 N 352 372 N 375 380 N 400 425 450 495 500 N 530 540 N 550 N 560 580 N 600 640 N 850 900 N

Li (mm) 160 280 300 315 322 335 N 340 355 375 400

Li up to 980

Li (inch)

Pieces 25

RMA

9.45 N 9.84 N 10.24 N 10.43 N 10.63 11.02 11.81 12.40 12.60 N 12.99 N 13.19 13.35 13.35 N 13.78 N 13.86 14.65 N 14.76 14.96 N 15.75 16.73 17.72 19.49 19.69 N 20.87 21.26 N 21.65 N 22.05 22.83 N 23.62 25.20 N 33.46 35.43 N

Li (inch) 6.30 11.02 11.81 12.40 12.68 13.19 N 13.39 13.98 14.76 15.75

RMA

V-belts CONTI-V ADVANCE FO№Бе-Z Classic Heavy-duty cogged raw edge V-belts

Section 8/Ref. 6533142 6533170 6533147 6533171 6533155 6533156 6533158 6533173 6533162 6533174 6533163 6533164 6533165 6533161 6533172 6533175 6533180

Section 10/Z Ref. 6534003 6534004 6534005 6534006 6432000 * 6534010 6594046 6534012 6534013 6534001 6594052 6534007 6534008 6534002 6594059 6534011 6594061 6534009 6594065 6594066 6534014 6594068 6432000 * 6534016 6534017 6534018 6534019 6534020 6534021 6534022 6534023 6534024 6534025 6534026 6534027 6534028 6534029 6534030 6534031 6534032 6534033

Li (mm) 430 N 450 475 N 495 530 560 N 580 N 600 630 N 655 N 670 N 680 N 700 N 710 N 717 N 750 N 800 N

Li (mm) 375 N 380 N 400 N 425 N 440 N 450 N 460 N 475 N 500 N 520 N 525 N 530 N 560 N 575 N 590 N 600 N 615 N 630 N 650 N 660 N 670 N 680 N 700 N 710 N 725 N 750 N 765 N 775 N 790 N 800 N 820 N 825 N 840 N 850 N 865 N 875 N 900 N 925 N 940 N 950 N 980 N

Li (inch)

RMA

16.93 N 17.72 18.70 N 19.49 20.87 22.05 N 22.83 N 23.62 24.80 N 25.79 N 26.38 N 26.77 N 27.56 N 27.95 N 28.23 N 29.53 N 31.50 N

Li (inch) 14.76 N 14.96 N 15.75 N 16.73 N 17.32 N 17.72 N 18.11 N 18.70 19.69 N 20.47 N 20.67 N 20.87 N 22.05 N 22.64 N 23.23 N 23.62 N 24.21 N 24.80 N 25.59 N 25.98 N 26.38 N 26.77 N 27.56 N 27.95 N 28.54 N 29.53 N 30.12 N 30.51 N 31.10 N 31.50 N 32.28 N 32.48 N 33.07 N 33.46 N 34.06 N 34.45 N 35.43 N 36.42 N 37.01 N 37.40 N 38.58 N

RMA

Section 13/A Ref. 6535001 6590041 6590046 6432000 * 6535002 6590051 6432000 * 6535003 6432000 * 6535004 6535005 6535006 6535007 6535008 6535009 6535010 6535011 6535012 6535013 6535014 6535015 6535016

Li (mm) 400 N 407 N 460 N 475 N 483 N 508 N 525 N 535 N 540 N 560 N 580 N 600 N 630 N 655 N 670 N 690 N 710 N 730 N 750 N 767 N 780 N 787 N

Li (inch) 15.75 N 16.02 N 18.11 N 18.70 N 19.02 N 20.00 N 20.67 N 21.06 N 21.26 N 22.05 N 22.83 N 23.62 N 24.80 N 25.79 N 26.38 N 27.17 N 27.95 N 28.74 N 29.53 N 30.20 N 30.71 N 30.98 N

RMA

A 22 A 23 A 24 A 25 A 26 A 26.5 A 27 A 28 A 29 A 29.5 A 30 A 30.5 A 31

Z 17.75 Z 18 Z 18.5 Z 19.75 Z 20.5 Z 21 Z 22 Z 22.5 Z 23 Z 23.5 Z 24 Z 25 Z 25.5 Z 26 Z 26.5 Z 27 Z 28 Z 28.5 Z 29.5 Z 30 Z 30.5 Z 31 Z 31.5 Z 32 Z 33 Z 33.5 Z 34 Z 34.5 Z 35.5 Z 36.5 Z 37 Z 37.5 Z 38.5

* Available on demand

37

V-belts

CONTI-V ADVANCE FO®-Power Heavy-duty cogged raw edge V-belts

Features – Moderately oil-resistant – Resistant to temperatures from –30 °C up to +80 °C – Electrically conductive (antistatic) to ISO 1813 – Insensitive to dust – Suitable for tropical climates

Section XPZ

Ld up to 1950 2360 3500

Section XPZ Ref. 6570159000 6570156000 6570127000 6570054000 6570062000 6570056000 6570057000 6570066000 6570067000 6570101000 6570118000 6570169000

Section XPA Ref. 6570122000 6570174000 6570156000 6570145000 6570176000 6570146000 6570144000 6570155000 6570143000 6570141000 6570147000 6570148000 6570149000 6570150000 6570134000 6570133000 6570175000 6570140000 6570151000 6570166000 6570168000 6570171000 6570165000 6477000316 6570172000 6477000317 6570167000 6570173000

Pieces 25 10 5

Section XPA

Ld (mm) 545 569 800 900 925 950 975 1000 1060 1140 1210 1287

Ld (mm) 800 910 1180 1210 1430 1480 1500 1530 1550 1580 1600 1630 1650 1680 1700 1750 1757 1800 1850 1900 1932 1950 2000 2082 2132 2180 2500 2800

Section

bo (mm)

bo (inch)

h (mm)

h (inch)

XPZ XPA XPB

9.0 11.5 15.3

0.35 0.45 0.60

8 9 13

0.31 0.35 0.51

Ld up to 1950 2360 3550

Ld (inch) 21.45 22.40 31.50 35.44 36.42 37.40 38.39 39.37 41.74 44.89 47.64 50.67

Pieces 25 10 5

Section XPB

Ld up to 1900 3550

Section XPB Ref.

L=L

The datum length Ld according to DIN / ISO, corresponds to the pitch length Lp.

Pieces 10 5

Ld (mm)

6570142000 6570123000 6570125000 6570160000 6570163000 6570164000 6570048000 6570049000 6570129000 6570128000

Ld (inch) 31.50 35.83 46.46 47.64 56.30 58.27 59.05 60.24 61.03 62.20 63.00 64.18 64.97 66.15 66.93 68.90 68.90 70.87 72.84 74.814 70.07 76.78 78.75 81.97 83.94 85.83 98.43 110.24

Intermediate lengths on request

38

from 1000 mm upwards

1320 1400 1500 2000 2060 2190 2500 2650 3000 3150

Ld (inch) 51.97 55.12 59.06 78.75 81.11 86.23 98.43 104.33 118.12 124.03

Flat belts

CONTI POLYFLAT® Open-ended polyurethane flat belts

Section Features – Oil-resistant F HP – Petrol and benzene F HF * – Resistant to temperatures F HS * from –30 °C up to +80 °C. For operational F XHP * temperatures outside this range please seek advice from our technical experts.

– Hard-wearing – Resistant to hydrolysis – Resistant to UV radiation and ozone – Maintenance-free

F HP Section F10 F15 F20 F25 F30 F40 F50 F85 F100

Width (mm) 10 15 20 25 30 40 50 85 100

h (mm) 2.30 2.10 2.50 3.00

Size designation (example): (Preferred type)

M 30 F 20 HP F 20 HF -V- 2500/98.43 (mm/inch) M 30 F 20 HP

Length of the rolls Flat belt 20 mm (0.79 inch) timing belt width Version HP (high power)

Width (inch) 0.39 0.59 0.79 0.98 1.18 1.57 1.97 3.35 3.94

Available tension member versions: HP high power HF high flexibility HS high stiffness XHP extremely high power

Standard roll lengths 30 m. Alternative tension members, belt widths, shorter lengths, fabric coating (PAR/PAZ) as well as pre-joined belts (for lengths > 1000 mm), available on request.

* Available on demand

39

V-belts

CONTI VARISPEED® Varidur, Agridur Variable speed belts for variator drives CONTI VARISPEED Varidur

CONTI VARISPEED Agridur

Features – Moderately oil-resistant – Resistant to temperatures from –30 °C up to +80 °C – Electrically conductive (antistatic) to ISO 1813 – Insensitive to dust – Suitable for tropical climates

special type for agricultural machinery – with polyester tension member + 45% surcharge on the CONTI VARISPEED Variflex prices – with aramid tension member on request

Height (Angle) (mm) 6 (26°) 8 (26°) 10 (28°) 13 (28°) 16 (30°) 18 (30°) 20 (30°) 22 (30°) 25 (30°)

Widths (Standardwidths) (mm)

Height (Angle) (inch)

Widths (Standardwidths) (inch)

13, 17 (W16), 22 22, 24, 26 (W25), 28 25, 28, 30, 32, 36, 37 30, 35, 40, 42 (W40), 46 52 (W50), 55 70 65 (W63), 70 70 83

0.24 (26°) 0.31 (26°) 0.39 (28°) 0.51 (28°) 0.63 (30°) 0.71 (30°) 0.79 (30°) 0.87 (30°) 0.98 (30°)

0.51, 0.67, 0.87 0.87, 0.94, 1.02, 1.10 0.98, 1.10, 1.18, 1.26, 1.42, 1.46 1..18, 1.38, 1.57, 1.65, 1.81 2.05, 2.17 2.76 2.56, 2.76 2.76 3.27

Height 6 mm (26°) Li (mm) Li (inch) 16.61 422 17.80 452 18.11 460 18.31 465 18.58 472 18.70 475 19.69 500 20.67 525 20.94 532 21.10 536 21.65 550 23.62 600 23.86 606 24.02 610 25.59 650 26.57 675 27.01 686 27.56 700 29.53 750 30.39 772 31.50 800 33.46 850 34.49 876 35.43 900 37.40 950 38.43 976 39.37 1000 41.34 1050 41.73 1060 44.09 1120

40

The datum length Ld according to DIN / ISO corresponds to the pitch length Lp.

Height 8 mm (26°) Li (mm) Li (inch) 18.11 460 19.69 500 20.47 520 20.75 527 21.65 550 22.52 572 23.62 600 24.02 610 24.69 627 25.00 635 25.59 650 25.79 655 26.46 672 27.56 700 27.95 710 28.43 722 28.94 735 29.53 750 30.00 762 30.51 775 31.50 800 32.09 815 32.48 825 33.46 850 33.94 862 34.13 867 35.43 900 37.40 950 37.87 962 38.07 967 39.37 1000 40.00 1016 41.73 1060 42.60 1082

CONTI VARISPEED Varidur are non-stock items which are specially manufactured to customer´s order. The minimum order quantity is a full sleeve, whose size is function of the belt width.

The number of belts in a sleeve is calculated by dividing the width of the sleeve (always 900 mm) by the width of the belt.

The included angle should also always be indicated on the order.

Intermediate lengths on request.

Height 8 mm (26°) Li (mm) Li (inch) 44.09 1120 44.88 1140 45.67 1160 47.72 1212 48.23 1225 49.21 1250 50.98 1295 51.97 1320 53.15 1350 53.74 1365 55.12 1400 59.06 1500 61.50 1562 62.99 1600 66.93 1700 67.91 1725 70.87 1800 74.80 1900 98.43 2500 102.36 2600

Height 10 mm (28°) Li (mm) Li (inch) 21.65 550 23.23 590 24.17 614 24.61 625 25.20 640 25,59 650 25.79 655 26.06 662 26.46 672 26.77 680 27.56 700 28.43 722 29.53 750 29.72 755 30.51 775 31.10 790 31.50 800 32.28 820 32.68 830 33.07 840 33.46 850 33.86 860 34.45 875 35.43 900 35.83 910 36.42 925 36.81 935 37.40 950 38.39 975 38.70 983 39.37 1000 40.24 1022 40.55 1030 40.94 1040

Timing belts CONTI VARISPEED Varidur, Agridur Variable speed belts for variator drives

Height 10 mm (28°) Li (mm) Li (inch) 41.34 1050 41.73 1060 42.24 1073 42.52 1080 44.09 1120 45.67 1160 46.85 1190 47.24 1200 48.03 1220 49.21 1250 51.18 1300 51.97 1320 53.74 1365 55.12 1400 59.06 1500 62.99 1600 64.17 1630 65.04 1652 66.93 1700 70.87 1800 71.26 1810 75.39 1915 78.74 2000 81.30 2065 98.43 2500

Height 13 mm (28°) Li (mm) Li (inch) 23.62 600 24.61 625 25.59 650 26.57 675 27.56 700 28.54 725 29.53 750 31.50 800 33.46 850 34.25 870 35.43 900 36.42 925 37.40 950 37.80 960 38.19 970 38.58 980 39.37 1000 40.35 1025 40.94 1040 41.73 1060 44.09 1120 44.88 1140 46.46 1180 46.77 1188 49.21 1250 49.80 1265 51.97 1320 52.68 1338 55.12 1400 59.06 1500 60.55 1538 62.99 1600 66.93 1700 68.43 1738 68.90 1750 70.87 1800 75.59 1920 76.30 1938 78.74 2000 81.30 2065 83.46 2120 85.75 2178 88.19 2240 95.98 2438 97.48 2476 101.57 2580 110.24 2800

Height 16 mm (30°) Li (mm) Li (inch) 42.09 1069 45.28 1150 46.46 1180 49.21 1250 51.97 1320 55.12 1400 57.09 1450 59.06 1500 60.04 1525 60.63 1540 62.99 1600 66.93 1700 67.91 1725 70.87 1800 74.80 1900 75.79 1925 78.74 2000 82.68 2100 85.24 2165 88.19 2240 95.47 2425 98.43 2500 107.28 2725 121.06 3075

Height 22 mm (30°) Li (mm) Li (inch) 66.93 1700 70.87 1800 78.74 2000 88.19 2240 98.43 2500 110.24 2800 124.41 3160 Height 25 mm (30°) Li (mm) Li (inch) 74.41 1890 78.74 2000 83.39 2118 93.62 2378 105.43 2678 119.21 3028 134.96 3428 135.04 3430

Height 18 mm (30°) Li (mm) Li (inch) 55.12 1400 56.69 1440 62.99 1600 66.93 1700 70.87 1800 78.74 2000 81.10 2060 88.19 2240 98.43 2500 110.24 2800 124.02 3150 Height 20 mm (30°) Li (mm) Li (inch) 55.12 1400 59.06 1500 62.99 1600 63.98 1625 66.93 1700 67.32 1710 70.87 1800 75.04 1906 78.74 2000 79.72 2025 81.30 2065 84.49 2146 88.19 2240 94.72 2406 98.43 2500 106.54 2706 110.24 2800 120.31 3056 136.06 3456

Stock items on request

41

CONTI-V® MULTIBELT Banded V-belts

Features – Moderately oil-resistant – Electrically conductive to ISO 1813 – Suitable for tropical climates – Resistant to temperatures from -40 °C up to +80 °C

Profile 3V (9J) Belt 3V 530 3V 560 3V 600 3V 630 3V 670 3V 710 3V 750 3V 800 3V 850 *3V 900 *3V 950 *3V 1000 *3V 1060 *3V 1120 *3V 1180 *3V 1250 *3V 1320 *3V 1400

La (mm) 9J 1346 9J 1422 9J 1524 9J 1600 9J 1702 9J 1803 9J 1905 9J 2032 9J 2159 9J 2286 9J 2413 9J 2540 9J 2692 9J 2845 9J 2997 9J 3175 9J 3353 9J 3556

La (inch) 9J 53 9J 56 9J 60 9J 63 9J 67 9J 71 9J 75 9J 80 9J 85 9J 90 9J 95 9J 100 9J 106 9J 112 9J 118 9J 125 9J 132 9J 140

Profile 5V (15J) Belt 5V 900 5V 950 5V 1000 5V 1060 5V 1120 5V 1180 5V 1250 5V 1320 5V 1400 5V 1500 5V 1600 5V 1700 5V 1800 5V 1900 5V 2000 5V 2120 5V 2240 5V 2360 5V 2500 5V 2650 5V 2900 5V 3000 5V 3150 5V 3350 5V 3550

La (mm) 15J 2286 15J 2413 15J 2540 15J 2692 15J 2845 15J 2997 15J 3175 15J 3353 15J 3556 15J 3810 15J 4064 15J 4318 15J 4572 15J 4826 15J 5080 15J 5385 15J 5690 15J 5994 15J 6350 15J 6731 15J 7366 15J 7620 15J 8001 15J 8509 15J 9017

La (inch) 15J 90 15J 95 15J 100 15J 106 15J 112 15J 118 15J 125 15J 132 15J 140 15J 150 15J 160 15J 170 15J 180 15J 190 15J 200 15J 212 15J 224 15J 236 15J 250 15J 265 15J 290 15J 300 15J 315 15J 335 15J 355

Profile 3V (9J) 5V (15J) 8V (25J) SPZ SPA SPB SPC A/HA B/HB C/HC D/HD

bo (mm) 9 15 25 9 12 16 22 13 16 22 32

Profile 8V (25J) Belt *8V 1000 *8V 1060 *8V 1120 *8V 1180 *8V 1250 *8V 1320 *8V 1400 *8V 1500 *8V 1600 *8V 1700 *8V 1800 *8V 1900 *8V 2000 *8V 2120 *8V 2240 *8V 2360 *8V 2500 *8V 2650 *8V 2800 *8V 3000 *8V 3150 *8V 3350 *8V 3550 *8V 3750 *8V 4000 *8V 4250 *8V 4500 *8V 4750 *8V 5000 *8V 5600

h (mm) 11 15 25 11 12 15 22 10 13 16 22

La (mm) 25J 2540 25J 2692 25J 2845 25J 2997 25J 3175 25J 3353 25J 3556 25J 3810 25J 4064 25J 4318 25J 4572 25J 4826 25J 5080 25J 5385 25J 5690 25J 5994 25J 6350 25J 6731 25J 7112 25J 7620 25J 8001 25J 8509 25J 9017 25J 9525 25J 10160 25J 10795 25J 11430 25J 12065 25J 12700 25J 14224

* Available on demand

42

bo (inch) 0.35 0.59 0.98 0.35 0.47 0.63 0.87 0.51 0..63 0.87 1.26

h (inch) 0.43 0.59 0.98 0.43 0.47 0.59 0.87 0.39 0.51 0.63 0.87

La (inch) 25J 100 25J 106 25J 112 25J 118 25J 125 25J 132 25J 140 25J 150 25J 160 25J 170 25J 180 25J 190 25J 200 25J 212 25J 224 25J 236 25J 250 25J 265 25J 280 25J 300 25J 315 25J 335 25J 355 25J 375 25J 400 25J 425 25J 450 25J 475 25J 500 25J 560

Size designation (example): 3/SPA x 1400 Lw 3 SPA 1400

Number of ribs Profile Pitch length in mm (55.12 inch)

Further profiles and dimensions on request.

V-belts CONTI-V№Бе MULTIBELT Banded V-belts

Profile SPZ Lw/Lp (mm) * 900 * 912 * 925 * 937 * 950 * 987 * 1047 * 1112 * 1120 * 1137 * 1162 * 1180 * 1187 * 1202 * 1212 * 1237 * 1250 * 1262 * 1267 * 1312 * 1320 * 1337 * 1347 * 1362 * 1387 * 1400 * 1412 * 1437 * 1462 * 1487 * 1500 * 1512 * 1537 * 1562 * 1587 * 1600 * 1612 * 1637 * 1662 * 1687 * 1700 * 1737 * 1762 * 1787 * 1800 * 1812 * 1837 * 1862 * 1887 * 1900 * 1937 * 1987 * 2000

Lw/Lp (inch) * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

35.43 35.91 36.42 36.89 37.40 38.86 41.22 43.78 44.09 44.76 45.75 46.46 46.73 47.32 47.72 48.70 49.21 49.69 49.88 51.65 51.97 52.64 53.03 53.62 54.61 55.12 55.59 56.57 57.56 58.54 59.06 59.53 60.51 61.50 62.48 62.99 63.46 64.45 65.43 66.42 66.93 68.39 69.37 70.35 70.87 71.34 72.32 73.31 74.29 74.80 76.26 78.23 78.74

* Available on demand

Profile SPZ Lw/Lp (mm) * 2120 * 2137 * 2187 * 2240 * 2262 * 2287 * 2300 * 2360 * 2450 * 2500 * 2650 * 2800 * 3000 * 3150 * 3350 * 3550

Profile SPA Lw/Lp (mm) * 900 * 1000 * 1107 * 1132 * 1157 * 1180 * 1200 * 1232 * 1250 * 1272 * 1282 * 1300 * 1332 * 1367 * 1382 * 1400 * 1432 * 1457 * 1482 * 1500 * 1532 * 1557 * 1582 * 1600 * 1632 * 1667 * 1682 1700 * 1707 * 1732 * 1757 * 1782 1800 * 1832 * 1857 * 1882 1900 * 1932 * 1957 * 1982 2000 * 2032 * 2067 * 2082 2120 * 2132

Lw/Lp (inch) * 83.46 * 84.13 * 86.10 * 88.19 * 89.06 * 90.04 * 90.55 * 92.91 * 96.46 * 98.43 * 104.33 * 110.24 * 118.11 * 124.02 * 131.89 * 139.76

Lw/Lp (inch) * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

35.43 39.37 43.58 44.57 45.55 46.46 47.24 48.50 49.21 50.08 50.47 51.18 52.44 53.82 54.41 55.12 56.38 57.36 58.35 59.06 60.31 61.30 62.28 62.99 64.25 65.63 66.22 66.93 67.20 68.19 69.17 70.16 70.87 72.13 73.11 74.09 74.80 76.06 77.05 78.03 78.74 80.00 81.38 81.97 83.46 83.94

Profile SPA Lw/Lp (mm) * 2182 * 2207 2240 * 2282 * 2300 * 2332 2360 * 2382 * 2432 * 2482 2500 * 2532 * 2582 * 2607 * 2632 2650 * 2682 * 2732 * 2782 2800 * 2832 * 2847 * 2882 * 2932 * 3000 * 3032 * 3082 * 3150 * 3182 * 3282 * 3350 * 3382 * 3550 * 3750 * 4000 * 4250 * 4500

Profile SPB Lw/Lp (mm) 2000 2100 2240 2360 2500 2650 2800 3000 3150 3350 3550 3750 4000 4250 4500 4750 5000 5300 5600 6000 * 6300 * 6700 * 7100 * 7500 * 800 * 9500 * 10000

Lw/Lp (inch) * 85.91 * 86.89 88.19 * 89.84 * 90.55 * 91.81 92.91 * 93.78 * 95.75 * 97.72 98.43 * 99.69 * 101.65 * 102.64 * 103.62 104.33 * 105.59 * 107.56 * 109.53 110.24 * 111.50 * 112.09 * 113.46 * 115.43 * 118.11 * 119.37 * 121.34 * 124.02 * 125.28 * 129.21 * 131.89 * 133.15 * 139.76 * 147.64 * 157.48 * 167.32 * 177.17

Profile SPC Lw/Lp (mm) * * * *

2650 2800 3000 3150 3350 3550 3750 4000 4250 4500 4750 5000 5300 5600 6000 6300 6700 7100 * 7500 8000 * 8500 * 9000 9500 * 10000 * 10600 * 11200 * 11800 * 12500

Lw/Lp (inch) * 104.33 * 110.24 * 118.11 * 124.02 131.89 139.76 147.64 157.48 167.32 177.17 187.01 196.85 208.66 220.47 236.22 248.03 263.78 279.53 * 295.28 314.96 * 334.65 * 354.33 * 374.02 * 393.70 * 417.32 * 440.94 * 464.57 * 492.13

Lw/Lp (inch) 78.74 82.68 88.19 92.91 98.43 104.33 110.24 118.11 124.02 131.89 139.76 147.64 157.48 167.32 177.17 187.01 196.85 208.66 220.47 236.22 * 248.03 * 263.78 * 279.53 * 295.28 * 31.50 * 374.02 * 393.70

43

V-belts CONTI-V№Бе MULTIBELT Banded V-belts

Profile A/HA Li (mm) La (mm) *1300 1336 *1450 1486 *1600 1536 *1625 1661 *1700 1736 *1800 1836 *1900 1936 *2000 2036 *2240 2276 *2500 2536 *2650 2686 *2845 2881 *3048 3084 *3250 3286 *3658 3694 *4000 4036

Li (inch) *51.18 *57.09 *62.99 *63.98 *66.93 *70.87 *74.80 *78.74 *88.19 *98.43 *104.33 *112.01 *120.00 *127.95 *144.02 *157.48

La (inch) 52.60 58.50 60.47 65.39 68.35 72.28 76.22 80.16 89.61 99.84 105.75 113.43 121.42 129.37 145.43 158.90

Profile B/HB Li (mm) La (mm) *1200 1262 *1300 1362 *1400 1462 *1500 1562 *1600 1662 *1625 1687 *1700 1762 *1800 1862 *1850 1912 *1900 1962 *2000 2062 *2100 2162 *2240 2302 *2300 2362 *2400 2462 *2465 2527 *2500 2562 *2600 2662 2616 2678 *2700 2762 2845 2907 3048 3110 3150 3212 3250 3312 *3350 3412 3450 3512 3550 3612 3658 3720 *3700 3762 *3750 3812 4000 4062 *4250 4312 *4500 4562 *4750 4812 *4953 5015 *5000 5062 *5300 5362 *5600 5662

Li (inch) *47.24 *51.18 *55.12 *59.06 *62.99 *63.98 *66.93 *70.87 *72.83 *74.80 *78.74 *82.68 *88.19 *90.55 *94.49 *97.05 *98.43 *102.36 102.99 *106.30 112.01 120.00 124.02 127.95 *131.89 135.83 139.76 144.02 *145.67 *147.64 157.48 *167.32 *177.17 *187.01 *195.00 *196.85 *208.66 *220.47

La (inch) 49.69 53.62 57.56 61.50 65.43 66.42 69.37 73.31 75.28 77.24 81.18 85.12 90.63 92.99 96.93 99.49 100.87 104.80 105.43 108.74 114.45 122.44 126.46 130.39 134.33 138.27 142.20 146.46 148.11 150.08 159.92 169.76 179.61 189.45 197.44 199.29 211.10 222.91

* Available on demand

44

Profile C/HC Li (mm) La (mm) *2286 2361 *2500 2575 *2750 2825 *3048 3123 *3250 3325 *3550 3625 *3700 3775 *3850 3925 *4250 4325 *4500 4575 *4750 4825 *5000 5075 *5300 5375 *5600 5675 *6000 6075 *6300 6375

Li (inch) 90.00 98.43 108.27 120.00 127.95 139.76 145.67 151.57 167.32 177.17 187.01 196.85 208.66 220.47 236.22 248.03

La (inch) 92.95 101.38 111.22 122.95 130.91 142.72 148.62 154.53 170.28 180.12 189.96 199.80 211.61 223.43 239.17 250.98

Profile D/HD Li (mm) La (mm) * 2286 2397 * 2500 2611 * 2800 2911 * 3048 3159 * 3250 3361 * 3658 3769 * 4000 4111 * 4115 4226 * 4394 4505 * 4572 4683 * 4953 5064 * 5334 5445 * 5715 5826 * 6096 6207 * 6477 6588 * 6858 6969 * 7239 7350 * 7620 7731 * 8000 8111 * 8382 8493 * 8763 8874 * 9144 9255 * 9906 10017 *10668 10779 *11430 11541 *12200 12311 *13206 13317 *13462 13573 *13716 13827 *14224 14335

Li (inch) 90.00 98.43 110.24 120.00 127.95 144.02 157.48 162.01 172.99 180.00 195.00 210.00 225.00 240.00 255.00 270.00 285.00 300.00 314.96 330.00 345.00 360.00 390.00 420.00 450.00 480.31 519.92 530.00 540.00 560.00

La (inch) 94.37 102.80 114.61 124.37 132.32 148.39 161.85 166.38 177.36 184.37 199.37 214.37 229.37 244.37 259.37 274.37 289.37 304.37 319.33 334.37 349.37 364.37 394.37 424.37 454.37 484.69 524.29 534.37 544.37 564.37

Conversion table (mm)

Conversion table CONTI V-belt and CONTI Multiple V-ribbed belts

V-belts

XPZ

10

8.5

4.5

8

2.0

La = Ld + 13

La = Li + 51

XPA

13

11.0

6.8

9

2.8

La = Ld + 18

La = Li + 57

XPB

16.3

14.0

7.3

13

3.5

La = Ld + 22

La = Li + 82

XPC

22

19.0

10.3

17

4.8

La = Ld + 30

W ei (k ght g/ m )

In ne L r le i ng th

d

D at u L m

le ng th

Be lt w id th Pi (to tc p) h w id t h Be lt w id th Be (b ot lt to he m ig ) h t Pi tc h he ig ht O ut er L le a ng th

Heavy-duty raw edge cogged V-belts DIN 7753 CONTI-V ADVANCE FO-Z

Measurements in mm

Li = Ld - 38

Li = La - 51

0.072

Li = Ld - 39

Li = La - 57

0.112

Li = Ld - 60

Li = La - 82

0.192

La = Li + 107

Li = Ld - 77

Li = La - 107

0.370

Nominal length

Narrow section wrapped V-belts DIN 7753 CONTI-V STANDARD Ultraflex SPZ*

9.7

8.5

8

2.0

La = Ld + 13

La = Li + 51

Li = Ld - 38

Li = La - 51

0.073

SPA

12.7

11.0

5.6

4

10

2.8

La = Ld + 18

La = Li + 63

Li = Ld - 45

Li = La - 63

0.100

SPB*

16.3

14.0

7.1

13

3.5

La = Ld + 22

La = Li + 82

Li = Ld - 60

Li = La - 82

0.178

19

18.6

15.0

8

15.7

3.5

La = Ld + 22

La = Li + 99

Li = Ld - 77

Li = La - 99

0.271

SPC

22

19.0

9.3

18

4.8

La = Ld + 30

La = Li + 113

Li = Ld - 83

Li = La - 113

0.380

5/-

5

4.2

2.9

3

1.3

La = Ld + 8

La = Li + 19

Ld = Li + 11

Ld = La - 8

6/Y

6

5.3

3.2

4

1.6

La = Ld + 10

La = Li + 25

Ld = Li + 15

Ld = La - 10

8/-

8

6.7

4.6

5

2.0

La = Ld + 12

La = Li + 31

Ld = Li + 19

Ld = La - 12

10/Z

10

8.5

5.9

6

2.5

La = Ld + 16

La = Li + 38

Ld = Li + 22

Ld = La - 16

0.060

13/A

13

11.0

7.5

8

3.3

La = Ld + 20

La = Li + 50

Ld = Li + 30

Ld = La - 20

0.105

Nominal length

Classical section raw edge V-belts DIN 2215 CONTI-V ADVANCE FO-Z / FO-Z Classic 0.015 Nominal length

0.023 0.041

Classical section wrapped V-belts DIN 2215 CONTI-V STANDARD Multiflex 8

6.7

4.6

5

2.0

La = Ld + 12

La = Li + 31

Ld = Li + 19

Ld = La - 12

0.040

10/Z

10

8.5

5.9

6

2.5

La = Ld + 16

La = Li + 38

Ld = Li + 22

Ld = La - 16

0.060

13/A

13

11.0

7.5

8

3.3

La = Ld + 20

La = Li + 50

Ld = Li + 30

Ld = La - 20

0.105

17/B

17

14.0

9.4

11

4.2

La = Ld + 26

La = Li + 69

Ld = Li + 43

Ld = La - 26

20/-

20

17.0

11.4

12.5

4.8

La = Ld + 31

La = Li + 79

Ld = Li + 48

Ld = La - 31

22/C

22

19.0

12.4

14

5.7

La = Ld + 36

La = Li + 88

Ld = Li + 52

Ld = La - 36

0.300

25/-

25

21.0

14.0

16

6.3

La = Ld + 40

La = Li + 101

Ld = Li + 61

Ld = La - 40

0.430

32/D

32

27.0

18.3

20

8.1

La = Ld + 51

La = Li + 126

Ld = Li + 75

Ld = La - 51

0.630

40/E

40

32.0

22.8

25

12.0

La = Ld + 75

La = Li + 157

Ld = Li + 82

Ld = La - 75

0.970

Nominal length

0.170 0.240

PJ

2.34

3.8

1.2

PK

3.56

5.0

1.5

PL

4.70

9.0

3.0

PM

9.40

14.5

4.0

Nominal length

W ei (k ght g/ p m er ) rib

Pi tc h L le ng w th

Measurements in mm Re f (d ere iff nc er e en lin ce e = m m ) Re fe r L en b ce le ng th

CONTI-V MULTIRIB

Ri b

Multible V-ribbed belts DIN 7867

pi tc h

Multiple V-ribbed belts

Be lt he ig ht

8/-

L w = Lb + 8

0.009

Lw = Lb + 10

0.021

Lw = Lb + 19

0.040

Lw = Lb + 25

0.120

45

Conversion table (inch)

Conversion table V-belts and Multiple V-ribbed belts V-belts

XPZ

0.39

0.33

0.18

0.31

0.08

La = Ld + 0.51 La = Li + 2.00

XPA

0.51

0.43

0.27

0.35

0.11

La = Ld + 0.71 La = Li + 2.24

XPB

0.64

0.55

0.29

0.51

0.14

La = Ld + 0.87 La = Li + 3.23

XPC

0.87

0.75

0.41

0.67

0.19

SPZ*

0.38

0.33

0.16

0.31

SPA

0.50

0.43

0.22

0.39

SPB*

0.64

0.55

0.28

19

0.73

0.59

SPC

0.87

0.75

W ei (k ght g/ m )

In ne L r le i ng th

d

D at u L m

le ng th

Be lt w id th Pi (to tc p) h w id th Be lt w id th Be (b ot lt to he m ig ) h t Pi tc h he ig ht O ut er L le a ng th

Heavy-duty raw edge cogged V-belts DIN 7753 CONTI-V ADVANCE FO-Z

Measurements in inches

Li = Ld - 1.50

Li = La - 2.01

0.072

Li = Ld - 1.54

Li = La - 2.24

0.112

Li = Ld - 2.36

Li = La - 3.23

0.192

La = Ld + 1.18 La = Li + 4.21

Li = Ld - 3.03

Li = La - 4.21

0.370

0.08

La = Ld + 0.51 La = Li + 2.00

Li = Ld - 1.50

Li = La - 2.01

0.073

0.11

La = Ld + 0.71 La = Li + 2.48

Li = Ld - 1.77

Li = La - 2.48

0.100

0.51

0.14

La = Ld + 0.87 La = Li + 3.23

Li = Ld - 2.36

Li = La - 3.23

0.178

0.31

0.62

0.14

La = Ld + 0.87 La = Li + 3.90

Li = Ld - 3.03

Li = La - 3.90

0.271

0.37

0.71

0.19

La = Ld + 1.18 La = Li + 4.45

Li = Ld - 3.27

Li = La - 4.45

0.380

Nominal length

Narrow section wrapped V-belts DIN 7753 CONTI-V STANDARD Ultraflex

Nominal length

Classical section raw edge V-belts DIN 2215 CONTI-V ADVANCE FO-Z / FO-Z Classic 5/-

0.20

0.17

0.11

0.12

0.05

La = Ld + 0.31 La = Li + 0.75

Ld = Li + 0.43

Ld = La - 0.31

6/Y

0.24

0.21

0.13

0.16

0.06

La = Ld + 0.39 La = Li + 0.98 Ld = Li + 0.59

Ld = La - 0.39

0.015

8/-

0.31

0.26

0.18

0.20

0.08

La = Ld + 0.47 La = Li + 1.22

Ld = Li + 0.75

Ld = La - 0.47

10/Z

0.39

0.33

0.23

0.24

0.10

La = Ld + 0.63 La = Li + 1.50

Ld = Li + 0.87

Ld = La - 0.63

13/A

0.51

0.43

0.30

0.31

0.13

La = Ld + 0.79 La = Li + 1.97

Ld = Li + 1.18

Ld = La - 0.79

0.105

0.023 Nominal length

0.041 0.060

Classical section wrapped V-belts DIN 2215 CONTI-V STANDARD Multiflex 8/-

0.31

0.26

0.18

0.20

0.08

La = Ld + 0.47 La = Li + 1.22

Ld = Li + 0.75

Ld = La - 0.47

0.040

10/Z

0.39

0.33

0.23

0.24

0.10

La = Ld + 0.63 La = Li + 1.50

Ld = Li + 0.87

Ld = La - 0.63

0.060

13/A

0.51

0.43

0.30

0.31

0.13

La = Ld + 0.79 La = Li + 1.97

Ld = Li + 1.18

Ld = La - 0.79

0.105

17/B

0.67

0.55

0.37

0.43

0.17

La = Ld + 1.02 La = Li + 2.72

Ld = Li + 1.69

Ld = La - 1.02

20/-

0.79

0.67

0.45

0.49

0.19

La = Ld + 1.22 La = Li + 3.11 Ld = Li + 1.89

Ld = La - 1.22

22/C

0.87

0.75

0.49

0.55

0.22

La = Ld + 1.42 La = Li + 3.46

Ld = Li + 2.05

Ld = La - 1.42

0.300

25/-

0.98

0.83

0.55

0.63

0.25

La = Ld + 1.57 La = Li + 3.98

Ld = Li + 2.4

Ld = La - 1.57

0.430

32/D

1.26

1.06

0.72

0.79

0.32

La = Ld + 2.01 La = Li + 4.96

Ld = Li + 2.95

Ld = La - 2.01

0.630

40/E

1.57

1.26

0.90

0.98

0.47

La = Ld + 2.95 La = Li + 6.18

Ld = Li + 3.23

Ld = La - 2.95

0.970

0.009

Lw = Lb + 0.39

0.021

Lw = Lb + 0.75

0.040

Lw = Lb + 0.98

0.120

0.15

0.14

0.20

0.06

PL

0.19

0.35

0.12

PM

0.37

0.57

0.16

46

pi tc h

0.09

Nominal length

W ei (k ght g/ p m er ) rib

Pi tc h L le ng w th

Lw = Lb + 0.32

Be lt he ig ht

0.05

PJ PK

CONTI-V MULTIRIB

0.240

Measurements in inches

Ri b

Multible V-ribbed belts DIN 7867

0.170

Re f (d ere iff nc er e en lin ce e = in ch Re ) fe L ren b ce le ng th

Multiple V-ribbed belts

Nominal length

Conversion table (mm)

Conversion table Variable speed belts and timing belts

Variable speed belts

W ei (k ght g/ m )

In ne L r le i ng th

le ng th d

D at u L m

CONTI VARISPEED Variflex

Be lt w id th Pi tc (to h p) w Be idth lt w id th Be (b lt ot he to ig m ht Pi ) tc h he ig Fl ht an k O ut e L r le a ng th

DIN 7719 / ISO 1604

Measurements in mm

17/6 (W 16)

17

16

14.2

6

1.5

26 La = Ld + 10

La = Li + 38

Nomin. length Li = La - 38

Li = Ld- 28

0.112

21/7 (W 20)

21

20

17.5

7

1.75 28 La = Ld + 11

La = Li + 44

Nomin. length Li = La - 44

Li = Ld - 33

0.160

22/6

22

21.3 19.2

6

1.5

La = Li + 28

26

25

8

2

26 La = Ld + 10 28 La = Ld + 12

La = Li+ 38

26/8 (W 25)

La = Li + 50

Nomin. length Li = La - 50

Li = Ld - 33

28/8

28

27.1 24.3

8

2

26 La = Ld + 12

La = Li + 50

Ld = Li + 38

Nomin. length 0.245

22

Li = La - 10 Li = La - 12

Nomin. length 0.145 0.225

33/10 (W 31.5)

33

31.5 28

10

2.5

28 La = Ld + 16

La = Li+ 63

Nomin. length Li = La + 63

Li = Ld - 47

37/10

37

35.7 32

10

2.5

La = Li+ 63

La = Li + 47

Nomin. length 0.400

La = Li + 82

Nomin. length Li = La + 82

Li = Ld - 62

La = Li + 82

La = Li + 62

Nomin. length 0.675

42/13 (W 40)

42

40

35.5 13

28 La = Ld + 16 3.25 28 La = Ld + 20

47/13

47

45.4 40.5 13

3.25 28 La = Ld + 20

Li = La + 16 Li = La + 20

0.360 0.600

52/16 (W 50)

52

50

43.4 16

4

30 La = Ld + 25

La = Li + 100

Nomin. length Li = La + 100

Li = Ld - 75

55/16

55

53

47

4

28 La = Ld + 25

La = Li + 100

La = Li + 75

Nomin. length 0.915

16

Li = La + 25

0.915

65/20 (W 63)

65

63

54.3 20

5

30 La = Ld + 32

La = Li+ 126

Nomin. length Li = La + 126

Li = Ld - 94

1.430

83/26 (W 80)

83

80

68.1 26

6.5

32 La = Ld + 41

La = Li + 163

Nomin. length Li = La + 163

Li = Ld - 122

2.365

Timing belts

in an gl e Fl an k

he ig ht Pi tc h

he ig ht

w id th To ot h

CONTI SYNCHROBELT

To ot h

Timing belts DIN 5296

Be lt he ig ht

°

Measurements in mm

MXL

1.14

0.51

1.14

0.254

40.0

XL

2.30

1.27

2.57

0.254

50.0

L

3.60

1.91

4.65

0.381

40.0

H

4.30

2.29

6.12

0.686

40.0

11.20

6.35

12.57

1.397

40.0

XH

47

Conversion table (inch)

Conversion table Variable speed belts and timing belts

17/6 (W 16)

W ei (k ght g/ m )

In ne L r le i ng th

le ng th d

CONTI VARISPEED Variflex

D at u L m

DIN 7719 / ISO 1604

Measurements in inch

Be lt w id th Pi tc (to h p) w i d Be th lt w id th Be (b lt ot he to ig m ht Pi ) tc h he ig Fl ht an k O ut e L r le a ng th

Variable speed belts

0.67 0.63 0.56 0.24 0.06 26 La = Ld + 0.39 La = Li + 1.50 0.83 0.79 0.69 0.28 0.07 28 La = Ld + 0.43 La = Li + 1.73 0.87 0.84 0.76 0.24 0.06 26 La = Ld + 0.39 La = Li + 1.50

Nomin. length Ld = La - 1.50

Li = Ld - 1.10

21/7 (W 20) 22/6

Nomin. length Ld = La - 1.73 Ld = Li + 1.10 Ld = La - 0.39

Li = Ld - 1.30 0.160 Nomin. length 0.145

26/8 (W 25)

1.02 0.98 0.87 0.31 0.08 28 La = Ld + 0.47 La = Li + 1.97

Nomin. length Ld = La - 1.97

Li = Ld - 1.30

28/8

Ld = Li + 1.50

Nomin. length 0.245

37/10

1.10 1.07 0.96 0.31 0.08 26 La = Ld + 0.47 La = Li + 1.97 1.30 1.24 1.10 0.39 0.10 28 La = Ld + 0.63 La = Li + 2.48 1.46 1.14 1.26 0.39 0.10 28 La = Ld + 0.63 La = Li + 2.48

42/13 (W 40)

1.65 1.57 1.40 0.51 0.13 28 La = Ld + 0.79 La = Li + 3.23

Nomin. length Ld = La + 3.23 Li = Ld - 2.44

47/13

1.85 1.79 1.59 0.51 0.13 28 La = Ld + 0.79 La = Li + 3.23

Ld = Li + 2.44

52/16 (W 50)

2.05 1.97 1.71 0.63 0.16 30 La = Ld + 0.98 La = Li + 3.94

Nomin. length Ld = La + 3.94 Li = Ld - 2.95

55/16

2.17 2.09 1.85 0.63 0.16 28 La = Ld + 0.98 La = Li + 3.94 2.56 2.48 2.14 0.79 0.20 30 La = Ld + 1.26 La = Li + 4.96 3.27 3.15 2.68 1.02 0.26 32 La = Ld + 1.61 La = Li + 6.42

Ld = Li + 2.95

33/10 (W 31.5)

65/20 (W 63) 83/26 (W 80)

Timing belts

Ld = La - 0.47

Nomin. length Ld = La + 2.48 Li = Ld - 1.85 Ld = Li + 1.85

0.112

0.225 0.360

Ld = La + 0.63 Nomin. length 0.400 0.600

Ld = La + 0.79 Nomin. length 0.675 0.915

Ld = La + 0.98 Nomin. length 0.915

Nomin. length Ld = La + 4.96 Li = Ld - 3.70

1.430

Nomin. length Ld = La + 6.42 Li = Ld - 4.80

2.365

in an gl e Fl an k

he ig ht Pi tc h

w id th To ot h

0.04

0.02

0.04

0.01

40.0

XL

0.09

0.05

0.10

0.01

50.0

L

0.14

0.07

0.18

0.015

40.0

H

0.17

0.09

0.24

0.027

40.0

XH

0.44

0.25

0.49

0.055

40.0

CONTI SYNCHROBELT

2

he ig ht To ot h

MXL

Timing belts DIN 5296

1

Be lt he ig ht

°

Measurements in inch

Pitch length Nominal length

48

Conversion table (mm)

Conversion table Timing Belts and double-sided timing belts Timing belts

N om in al

Pi tc h L le ng w th

le ng th

Fl an k

in °

Pi tc h

2.40

1.20

1.8

0.380

–

Pitch length in mm

–

5

3.60

2.10

2.9

0.570

–

Pitch length in mm

–

8M

8

5.60

3.40

5.1

0.686

–

Pitch length in mm

–

14M

14

10.00

6.10

8.9

1.395

–

Pitch length in mm

–

8

5.30

2.95

5.1

0.686

–

Pitch length in mm

–

D5M

5

5.40

2.10

2.90

0.570

–

Pitch length in mm

–

D8M

8

8.20

3.40

5.10

0.686

–

Pitch length in mm

–

D14M

14

15.20

6.10

8.90

1.395

–

Pitch length in mm

–

DS8M

8

7.30

3.00

5.10

0.686

–

Pitch length in mm

–

DH

9.525

6.00

2.29

6.12

0.686

40.0

Pitch length in 1/10

Nominal length x 25.4

D5M CXP III

5

5.40

2.10

2.90

0.570

–

Pitch length in mm

–

D8M CXP III

8

8.20

3.40

5.10

0.686

–

Pitch length in mm

–

D14M CXP III

14

15.20

6.10

8.90

1.395

–

Pitch length in mm

–

DS8M CXP III

8

7.30

3.00

5.10

0.686

–

Pitch length in mm

–

3M CXP III

3

2.40

1.20

1.8

0.380

–

Pitch length in mm

–

5M CXP III

5

3.60

2.10

2.9

0.570

–

Pitch length in mm

–

8M CXP III

8

5.60

3.40

5.1

0.686

–

Pitch length in mm

–

14M CXP III

14

10.00

6.10

8.9

1.395

–

Pitch length in mm

–

8M CXA III

8

5.60

3.40

5.1

0.686

–

Pitch length in mm

–

14M CXA III

14

10.00

6.10

8.9

1.395

–

Pitch length in mm

–

To ot h

an gl e

he ig ht

To ot h

3

5M

CONTI SYNCHROBELT HTD

Be lt he ig ht

3M

Timing belts

pi tc h

To ot h

w id th

he ig ht

Measurements in mm

Timing belts CONTI SYNCHROBELT STD S8M Double-sided timing belts CONTI SYNCHROTWIN

Double-sided timing belts CONTI SYNCHROTWIN

Timing belts CONTI SYNCHROFORCE HTD

Timing belts CONTI SYNCHROFORCE STD S8M CXP III

8

5.30

2.95

5.1

0.686

–

Pitch length in mm

–

S8M CXA III

8

5.30

2.95

5.1

0.686

–

Pitch length in mm

–

49

Conversion table (inch)

Conversion table Timing Belts and double-sided timing belts Timing belts

Pi tc h

Fl an k

N om in al

le ng th

in °

To ot h

an gl e

he ig ht

To ot h

w id th

Be lt he ig ht

he ig ht

CONTI SYNCHROBELT HTD

To ot h

pi tc h

Measurements in inches

3M

0.12

0.09

0.05

0.07

0.01

–

Pitch length in mm

5M

0.20

0.14

0.08

0.11

0.02

–

Pitch length in mm

8M

0.31

0.22

0.13

0.20

0.03

–

Pitch length in mm

14M

0.55

0.39

0.24

0.35

0.05

–

Pitch length in mm

0.31

0.21

0.12

0.20

0.03

–

Pitch length in mm

D5M

0.20

0.21

0.08

0.11

0.02

–

Pitch length in mm

D8M

0.31

0.32

0.13

0.20

0.03

–

Pitch length in mm

D14M

0.55

0.60

0.24

0.35

0.05

–

Pitch length in mm

DS8M

0.31

0.29

0.12

0.20

0.03

–

Pitch length in mm

DH

0.38

0.24

0.09

0.24

0.03

40.0

Pitch length in 1/10

D5M CXP III

0.20

0.21

0.08

0.11

0.02

–

Pitch length in mm

D8M CXP III

0.31

0.32

0.13

0.20

0.03

–

Pitch length in mm

D14M CXP III

0.55

0.60

0.24

0.35

0.05

–

Pitch length in mm

DS8M CXP III

0.31

0.29

0.12

0.20

0.03

–

Pitch length in mm

3M CXP III

0.12

0.09

0.05

0.07

0.01

–

Pitch length in mm

5M CXP III

0.20

0.14

0.08

0.11

0.02

–

Pitch length in mm

8M CXP III

0.31

0.22

0.13

0.20

0.03

–

Pitch length in mm

14M CXP III

0.55

0.39

0.24

0.35

0.05

–

Pitch length in mm

8M CXA III

0.31

0.22

0.13

0.20

0.03

–

Pitch length in mm

14M CXA III

0.55

0.39

0.24

0.35

0.05

–

Pitch length in mm

Timing belts

Timing belts CONTI SYNCHROBELT STD S8M Double-sided timing belts CONTI SYNCHROTWIN

Double-sided timing belts CONTI SYNCHROTWIN

Timing belts CONTI SYNCHROFORCE HTD

Timing belts CONTI SYNCHROFORCE STD S8M CXP III

0.31

0.21

0.12

0.20

0.03

–

Pitch length in mm

S8M CXA III

0.31

0.21

0.12

0.20

0.03

–

Pitch length in mm

50

ContiTech Specialist in rubber and plastics technology

The ContiTech Division is a development partner and an original equipment supplier to many industries, and it provides high-grade functional parts, components and systems.

With their know-how in rubber and plastics technology, the nine business units make a contribution to safe and comfortable mobility.

This is what the ContiTech brand is all about.

ContiTech Specialist in rubber and plastics technology www.contitech.de

Power transmission technology worldwide ContiTech Antriebssysteme GmbH D-30004 Hannover ContiTech - INA GmbH & Co. KG Belt Drive Systems D-91072 Herzogenaurach Continental do Brasil Produtos Automotivos Ltda.

BR-84043-450 Ponta Grossa-Pr ContiTech Power Transmission Systems Ltd. GB - Wigan, WN2 4WZ ContiTech Mexicana S.A. de C.V. ContiTech Power Transmission Products MEX-C.P. 78090 San Luis Potosí, S.L.P.

WT 5500 E 03.05 (DMR) Printed with CONTI AIR® offset printing blankets on leached paper free of chlorine

ContiTech-Jiebao Power Transmission Systems Ltd. PRC-315611 Zhejiang ContiTech Romania S.R.L. Parcul Industrial Freidorf ROM-1900 Timisoara

Certifications

CERT EN ISO 9001

CERT EN ISO 9001

CERT CERT

ContiTech service worldwide

ContiTech Kautschuk- und Kunststoff Vertriebsgesellschaft m.b.H. Gewerbestraße 14 A-2351 Wiener Neudorf Phone 02236 4 91 01 Fax 02236 4 91 01 49

EN ISO 9001

CERT CERT

CERT CERT

CERT

ContiTech Belux Industriepark, Molenberglei 24 B-2627 Schelle Phone 03 8 80 71 40 Fax 03 8 80 71 41 ContiTech Continental Suisse S.A. Lerzenstrasse 19 CH-8953 Dietikon 1 Phone 043 343 20 10 Fax 043 343 20 11 ContiTech Antriebssysteme GmbH Niederlassung Berlin Köpenicker Straße 184 D-12355 Berlin (Rudow) Phone 030-66 92 08 03 Fax 030-66 92 05 05 Verkaufsbüro Mitte Am Waldstadion 4 D-37699 Fürstenberg Phone 05271-9 58 01 Fax 05271-59 20 Verkaufsbüro Süd Pfahlbühlstraße 75 D-71384 Weinstadt Phone 07151-96 79 47 Fax 07151-96 79 48 Continental Industrias del Caucho S.A. ContiTech Cityparc-Ronda de Dalt Ctra. de Hospitalet 147 E-08940 Cornellà (Barcelona) Phone 93 480 04 00 Fax 93 480 04 01

ContiTech Antriebssysteme GmbH Continentalstraße 1, D-29451 Dannenberg Phone +49 5861 806-0 Fax +49 5861 806-302 E-Mail: dannenberg@antriebssysteme.contitech.de ContiTech Antriebssysteme GmbH Postfach 445, D-30004 Hannover Philipsbornstraße 1, D-30165 Hannover Phone +49 511 938 -71 Fax +49 511 938 -52 32 Email: industrie.as@antriebssysteme.contitech.de www.contitech.de/antriebssysteme

ContiTech France SNC 3, rue Fulgence Bienvenue CE 147 F-92631 Gennevilliers Phone 1 41.47.92.92 Fax 1 47.92.08.22 Z.I. de la Silardiére F-42500 Le Chambon Feugerolles Phone 4 77.10.19.45/46 Fax 4 77.10.19.71 ContiTech Power Transmission Systems Ltd. Leigh Rd, Hindley Green GB-Wigan, WN 2, 4WZ Phone 1942 52 55 00 Fax 1942 52 40 00 ContiTech AG Shanghai Office Rm. 906B Block C Orient International Plaza No. 85 Lou Shan Guan Lu PRC-200335 Shanghai Phone 021 62 78 77 38 Fax 021 62 78 77 40 ContiTech Scandinavia AB Finlandsgatan 14 S-16493 Kista Phone 08 4 44 13 30 Fax 08 7 50 55 66 Continental Tyre and Rubber (S) Ltd. 298 Tiong Bahru Road #02-01 Tower Block Tiong Bahru Plaza SGP-Singapore 168730 Phone 6 377 1223 Fax 6 377 2202 ContiTech North America, Inc. 136, Summit Avenue USA-Montvale, NJ 07645 Phone 201 930-0600 Fax 201 930-0050

The content of this publication is provided for information only and without responsibility. ContiTech AG's obligations and responsibilities regarding its products are governed solely by the agreements under which they are sold. Unless otherwise agreed in writing, the information contained herein does not become part of these agreements. This publication does not contain any guarantee or agreed quality of ContiTech AG’s products or any warranty of merchantability, fitness for a particular purpose and non-infringement. ContiTech AG may make changes in the products or services described at any time without notice. This publication is provided on an "as is" basis. To the extent permitted by law, ContiTech AG makes no warranty, express or implied, and assumes no liability in connection with the use of the information contained in this publication. ContiTech AG is not liable for any direct, indirect, incidental, consequential or punitive damages arising out of the use of this publication. Information contained herein is not intended to announce product availability anywhere in the world. © 2005 ContiTech AG. All rights reserved.