November 2016
AGWW/AGWP
Load distributors for maximum load capacity Application: • For 4-leg chain slings to optimize the weight distribution • For two 2-leg chain slings – minimum one is using the load distributor
Advantages: • Increasing the load capacity of 4-leg chain slings • Patent-pending load distributor • In case of wear turning by 180° enables double life time • Load capacity up to 75,000 kg (up to 26 mm) • Cost effectiveness • Chain slings in G10 using the load distributor always replace chain slings in G8 of the next bigger size without load distributor • In some cases downsizing in chain diameter by one dimension within G10 is possible
application video
Example for pewag winner: Chain
Load distributor
IV- leg chains 0° – 45°
IV- leg chains 45° – 60°
Master link
WIN 10
No
8,000 kg
6,000 kg
VW 10
AGWW Load distributor
WIN 10
Yes
11,200 kg
8,000 kg
VW 13
WIN 26
No
56,000 kg
40,000 kg
VW 26
WIN 26
Yes
75,000 kg
53,000 kg
VW 32
Chain
Load distributor
IV- leg chains 0° – 45°
IV- leg chains 45° – 60°
Master link
WINPRO 10
No
10,600 kg
7,500 kg
VMWP 13/10
WINPRO 10
Yes
14,000 kg
10,000 kg
VMWP -/13
Example for pewag winner pro:
AGWP Load distributor
Customer information pewag winner AGWW and pewag winner pro AGWP Load Distributors
1
November 2016
Code
Connex*
h e
h1
AGWW 5/6
CW 8
AGWW 7/8
AGWW 10
Weight
[kg] 1,400
148
35
16
22
11
9
6 for 5 mm chain 5 for 6 mm chain
0.54
3,550
2,500
210
51
22
25
15.50
14
6 for 7 mm chain 5 for 8 mm chain
1.75
5,600
4,000
180
32
25
32
23
15.50
4
1.56
WLL a 45° – 60°
[kg] 2,000
CW 10
CW 13
AGWW and AGWP Load distributor s
Difference L1/L2 [chain [mm] [mm] [mm] [mm] [mm] [mm] links]
WLL 0° – 45°
e
d1
d2
h
h1
d2 d1 a
h e
s
h1
AGWW 13
CW 16
9,500
6,700
240
53
32
40
27
20
4
3.60
AGWW 16
CW 19/20
14,000
10,000
300
77
40
50
32
25
4
7.18
AGWW 19/20
CW 26
20,000
14,000
390
79
50
70
45
30
5
13.20
AGWW 22
CW 32
26,500
19,000
350
124
60
70
50
35
5
15
AGWW 26
CW 32
37,500
26,500
400
130
70
75
60
40
4
25.60
AGWP 7/8
CWP 10
4,250
3,000
210
51
22
25
15.50
14
6 for 7 mm chain 5 for 8 mm chain
1.75
AGWP 10
CWP 13
7,100
5,000
180
32
25
32
23
15.50
4
1.56
d2 d1 a
* Please use this Connex to assemble the load distributor in the four-leg sling. Static test coefficient = 2,5 x load capacity of the respective chain section; safety factor = 4
Safety factor 4
IV- leg chains with load distributor
Angle of inclination β
0° – 45°
45° – 60°
Load factor
2.8
2
Code
[kg/pc.]
d
Load capacity [kg]
WIN 5
5
2,800
2,000
WIN 6
6
4,000
2,800
WIN 7
7
5,300
3,750
WIN 8
8
7,100
5,000
WIN 10
10
11,200
8,000
WIN 13
13
19,000
13,200
WIN 16
16
28,000
20,000
WIN 19
19
20,000
14,000
WIN 22
22
26,500
19,000
WIN 26
26
37,500
26,500
WINPRO 7
7
6,700
4,750
WINPRO 8
8
8,500
6,000
WINPRO 10
10
14,000
10,000
If the chain slings are used in severe conditions (e.g. high temperature, asymmetric load distribution, edge load, impact/shock loads), the maximum load capacity values in the table must be reduced by the load factors.
pewag austria GmbH A-8041 Graz, Gaslaternenweg 4, Phone: +43 316 6070-0, Fax: +43 316 6070-100 office@pewag.com, www.pewag.com
Technical changes and misprints are subject to alteration.
Customer information pewag winner AGWW and pewag winner pro AGWP Load Distributors
2
DS/16/00051
Please also note the user information on different conditions of use and their effects on the load capacity values!