27 minute read

Charles “Pete” Conrad, Jr., Capt. U.S. Navy

Next Article
PATEK PHILIPPE

PATEK PHILIPPE

Charles “Pete” Conrad, Jr. (1930-1999) was a U.S. Navy captain, aeronautical engineer and NASA astronaut best known as commander of the Apollo 12, the second mission to the Moon by the United States of America in 1966, and the third man in history to walk on the Moon.

Due to his aptitude for aviation since his teenage years, Conrad excelled as a naval aviator and a fighter pilot in the U.S. Navy. He later joined the U.S. Naval Test Pilot School where he became a Project Test Pilot, during which he was selected for the second group of nine astronauts known as the “New Nine” to participate in NASA’s Project Mercury, which ran from 1958 through 1963.

The 20th century was a time when space exploration not only marked pivotal moments in human history, but it also became a heated competition between nations, especially between the U.S. and the Soviet Union who were the first to send a human into space in 1961. The advancement in spaceflight was also seen as symbolic of national security, hence Project Mercury was conceived as the first human spaceflight program of the U.S. to compete with the Soviet Union in the Space Race.

Conrad quickly became regarded as one of the best pilots in his group and during his assigned mission as pilot of Gemini 5 in 1965, he and his commander Gordon Cooper set a new space endurance record of eight days in space, breaking the previously held record by the Soviet Union’s Vostok 5 in 1963. As commander of Gemini 11, he achieved the highest-record altitude above earth for any spacecraft in history.

On 19th November 1969, during the launch of the Apollo 12 mission, a series of lightning stuck moments after liftoff, temporarily disabling power and guidance in the Command Module. The issue was quickly resolved, and the Apollo 12 made its successful and precise landing on the Moon. Upon landing, Conrad became the third person to step on the moon, after Neil Armstrong and Buzz Aldrin. Known for his sense of humor and light-heartedness, Conrad referenced Armstrong’s historic moonwalk moment, “One small step for man, one giant leap for mankind,” and remarked, “Man, that may have been a small one for Neil, but that’s a long one for me.”

During Conrad’s last mission for NASA as commander of the first crewed mission to Skylab2, which was also the first U.S. space station, he managed to lead the crew in repairing significant damages on the station from its unmanned launch and spent a record-breaking 28 days in space aboard the station. As a result of his distinguished achievements and contributions to space exploration, Conrad was rewarded the Congressional Space Medal of Honor by President Jimmy Carter in 1978.

After his retirement from NASA and the U.S. Navy in 1973, he served as an executive for the McDonnell Douglas Corporation for 20 years. On 8th July 1999, Conrad passed away from internal injuries sustained from a motorcycle crash while travelling with his wife and friends in California. In honor of his legacy and work for aerospace science, NASA posthumously awarded Conrad the Ambassador of Exploration Award in 2006.

In keeping Conrad’s spirit for innovation and entrepreneurship alive, his wife Nancy Conrad, a former high school teacher launched the Conrad Foundation in 2008, dedicated to fostering the next generation of explorers in STEM (Science, Technology, Engineering, and Mathematics) fields and providing them with the opportunity to learn and succeed in their entrepreneurial endeavors for a sustainable future.

歐米茄,「Speedmaster Apollo XI 1969」型號BA 145.022-69,極度重要罕有, 限量版黃金計時鏈帶腕錶,備黃金錶盤、酒紅色錶圈,限量發行1014枚, 編號12號,1969年製。附後補證書 — 原腕錶阿波羅12號宇航指揮官

Captain Charles“Pete”Conrad, Jr. 珍藏

Manufacturer Omega

Year 1969

Reference No. BA 145.022-69

Movement No. 28’080’611

Case No. 12

Model Name

Speedmaster Apollo XI 1969

Material 18K yellow gold

Calibre Manual, cal. 861, 17 jewels

Bracelet/Strap 18K yellow gold Omega bracelet, max length 185mm

Clasp/Buckle 18K yellow gold Omega deployant clasp stamped “1116/575”

Dimensions 40mm diameter

Signed Case, dial, movement, bracelet and clasp signed

Estimate

HKD 550,000-1,000,000

USD 70,500-128,000

Accessories

Accompanied by Omega Extract from the Archives confirming production of the present watch the present timepiece production on 25th August 1969, and its subsequent delivery to Switzerland.

After millennia of admiring the Moon from afar, NASA finally achieved one of man’s greatest feats on 20th July 1969 with the moon landing of the Apollo XI lunar module. Since President John F. Kennedy declared the US’s commitment “to achieving the goal, before ‘the’ decade is out”, there had been a space race between the two Cold War rivals. Through dedication, resilience and perseverance, Neil Armstrong and Buzz Aldrin became the first men to set foot on the moon. With them, the Omega Speedmaster Professional became “the first watch worn on the moon”.

The ref.145.022 yellow gold chronograph was released that year to commemorate this momentous historical event. Produced as a limited edition of 1014 pieces, the first two examples were initially offered to the President and Vice-President of the United States, who sadly had to decline this gift due to compliance reasons. Luckily for collectors, No. 1 and No. 2 of the Speedmaster Apollo XI 1969 are now exhibited at the Omega Museum and can be admired by the public. Numbers 3 to 28 were offered to mission astronauts and were engraved “To mark man’s conquest of space with time, through time, on time” and with the recipient’s name, as per the present example. The following three examples, numbers 29 to 32, were given to Swiss personalities. They bear the same case back inscriptions as the astronaut’s timepieces and exclude their sequential number, making these watches the only 3 out of 1014 pieces with this attribute. Subsequently, numbers 33 to 1000 were commercialised, featuring an engraved case back reading “Omega Speedmaster-Apollo XI 1969- The First Watch Worn on the Moon”, as shown on the next lot.

The present ref. 145.022 not only has a strong appeal with a gold dial, onyx numerals and burgundy bezel, but also has a prominent provenance. Bearing a No. 12 on the caseback, this example is further engraved with the name of its original owner, Mr Charles Conrad. A man of many hats, Conrad was an American NASA astronaut, aeronautical engineer, naval officer, aviator, and test pilot. As the commander of the Apollo XII space mission, he became the third person to walk on the Moon between the 14th and the 24th of November in 1969. A time capsule piece, the present example is exceptionally well-preserved and seemingly untouched, boasting razor-sharp edges. Most likely worn a handful of times, the caseback engravings of this ref. 145.022 are crisp, deep and unrubbed.

The sublime combination of the present lot’s rarity, provenance, condition and vibrant aesthetic makes it one of the most exciting examples of a Speedmaster to appear in auction. Mr Charles Conrad’s very own Speedmaster Apollo XI 1969 is, without a doubt, a trophy watch deserving of a prominent place in any collection of important and rare sports models. In addition, Omega reissued a 50th Anniversary moonshine gold limited edition in 2019, paying tribute to the Moonwatch legacy and showing how important the brand itself deems this model to be for its heritage.

歐米茄,「Speedmaster

Professional Moonwatch Apollo XI 1969」型號BA 145.022,精細罕有,限量版黃金計時鏈帶腕錶,備黃金錶盤、酒紅色錶圈, 限量發行1014枚,編號569號,1969年製。附原裝證書、錶盒、後補證書

Manufacturer Omega

Year 1969

Reference No. BA 145.022

Movement No. 28’420’466

Case No. 569

Model Name Speedmaster Professional Moonwatch Apollo XI 1969

Material 18K yellow gold

Calibre Manual, cal. 861, 17 jewels

Bracelet/Strap 18K yellow gold Omega bracelet, max length 195mm

Clasp/Buckle 18K yellow gold Omega deployant clasp

Dimensions 40mm diameter

Signed Case, dial, movement, bracelet and clasp signed

Estimate

HKD 250,000-500,000

USD 32,100-64,100

Accessories

Accompanied by Omega international warranty stamped Anshindo Co. Ltd Japan dated 18th March 1970 and fitted presentation box. Further delivered with Omega Extract from the Archives confirming the present timepiece’s production date on 16th December 1969 and its subsequent delivery to Japan.

The yellow gold Omega Speedmaster ref. 145.022 was launched in commemoration of the historical moon landing in 1969. Produced as a limited edition of 1,014 examples only, the reference achieved holy grail status by virtue of its unrestrained opulence, rarity and historical importance.

Offered in excellent overall condition, this beautifully preserved yellow gold Speedmaster Professional Moonwatch Apollo XI 1969 is further accompanied by its original warranty from an esteemed Japanese retailer, dated 18th March 1970. In 2019, Omega issued the 50th Anniversary moonshine gold limited edition with a sapphire caseback as a reminder of how important the brand itself deems this model to be for its heritage.

歐米茄,「Speedmaster Professional Moonwatch,“Alaska Project”」型號 ST 145.022,極為罕有重要,精鋼計時腕錶,備白色錶盤,特為阿波羅計劃製造, 曾交予美國太空總署,1970年製。附後補證書

Manufacturer Omega

Year 1970

Reference No. ST 145.022-69

Movement No. 29’116’439

Model Name Speedmaster Professional Moonwatch, “Alaska Project”

Material Stainless steel

Calibre Manual, cal. 861, 17 jewels

Bracelet/Strap Fabric and leather strap

Clasp/Buckle Stainless steel pin buckle

Dimensions 40mm diameter

Signed Case, dial and movement signed

Estimate

HKD 250,000-400,000

USD 32,100-51,300

Accessories

Delivered with Omega Extract from the Archives confirming production of the present watch with white dial and luminous indexes, and its subsequent delivery to NASA’s Apollo Program Office (Houston, TX) for testing in 1972 as part of the “Alaska II” project.

The “Alaska Project” was a series of secret projects (four in total) undertaken by Omega to supply NASA with space-qualified timepieces. The results of the projects are a highly restricted number of watches which have been extensively used in space and which are now true collector’s grails, considered absolute endgame for Omega collectors - at least the few ones which are not in the possessions of Omega, museums, or NASA.

Even before NASA’s most famous Apollo 11 moon landing mission in 1969, and under the cover of the codename “Alaska Project”, Omega was working on a secret project to create the perfect space watch. The code-name “Alaska” was chosen to ensure that this secret project would remain as elusive as possible in case of any industrial espionage.

Following the cancellation of the Apollo missions after Apollo 17, there was no immediate use for the Alaska Project’s test-watches so the project was temporarily terminated, though remarkable progress had been made. This first phase of the development can be called “Alaska I”.

In the early 1970s, Omega began work on a continuation of its secret project, now internally titled “Alaska II”, which involved several studies and prototypes. The first batch of the “Alaska II” prototypes is closely related to the production of Speedmaster Professional, with less changes than those of the earlier project of 1969. It paired most of the tested technologies of “Alaska I” with the trusted and legendary Speedmaster Moonwatch case of the (then) current reference ST 145.022. The special characteristics of the watch are aimed at improving legibility and usage in space. For example, the white dial was considered more legible and the same holds true for the oversized subsidiary dials hands (aptly dubbed “Apollo” hands by Omega). Additionally, some examples are known to have a red anodized aluminum outer protective case.

The “Alaska II” test-watches were delivered to Houston at the beginning of 1970s, with the present lot delivered in 1972 as confirmed by the Extract. While once again considerable progress had been made, since the Apollo Program had come to an end by the end of 1972, the “Alaska II” test-watches were not retained by the program office and the series of Omega’s Alaska Projects came to a halt once more.

With a virtually flawless dial and an extremely well-preserved case, the present example represents an enormously scarce occasion for the Omega collector to own what is undoubtedly considered one of the holiest grails of Omega production.

歐米茄,十分罕有,「Omega Speedmaster Apollo-Soyuz」型號145.022,限量版 精鋼計時鏈帶腕錶,為紀念美國蘇聯首次聯航太空載人任務,於意大利市場限量 發行500枚,1976年製。附後補證書

Manufacturer Omega

Year 1976

Reference No. ST 145.022

Movement No. 39’181’247

Case No. 397

Model Name Speedmaster Apollo-Soyuz

Material Stainless steel

Calibre Manual, cal. 861, 17 jewels

Bracelet/Strap Stainless steel Omega bracelet, endlinks stamped “633” max length 195mm

Clasp/Buckle Stainless steel Omega deployant clasp stamped “1171/1”

Dimensions 40mm diameter

Signed Case, dial, movement, bracelet and clasp signed

Estimate

HKD 200,000-360,000

USD 25,600-46,200

Accessories

Accompanied with Omega hang tag. Delivered with Omega Extract from the Archives confirming the production of the present timepiece on 4th May 1976 and its delivery to Italy.

Literature

A similar example is illustrated in the book Moonwatch Only, 60 years of Omega Speedmaster, by Grégoire Rossier & Anthony Marquie, pp. 360-364.

On the 15th of July 1975, the historical Apollo-Soyuz Test Project (ASTP) marked the first crewed international space mission cooperatively carried out by the United States and Soviet Union. Two days later, on July 17th, the mission resulted in a successful docking of the American Apollo with a Soviet Union Soyuz capsule. Not only was this considered to be an important and memorable moment for space reconnaissance but also considered internationally as marking the end of the “Space Race” commenced in 1957 with the Sputnik 1.

The success of the first international crewed mission was commemorated a year later by Omega, who issued a limited edition of 500 special Speedmasters based on the classic Speedmaster Professional 145.022 model with caliber 861 movement, such as the present watch. The dial of this limited edition series bears the mission emblem at 12 o’clock without the Speedmaster Professional inscriptions, and long hour markers. The case of the ApolloSoyuz is also slightly different from the standard version as the chronograph pushers have a slightly larger diameter of 5.5mm rather than the usual 5mm. Consequently the case band had also to be adjusted. The exclusive ApolloSoyuz watches were all made for the Italian market, as evidenced by flanked circled “I” on its caseback. The limited series of Speedmaster utilizes a cal.861 and have serial numbers ranging between 39.180.xxx and 39.181.xxx.

Instantly recognizable among collectors, the Apollo-Soyuz Speedmaster is the second limited edition ever released by Omega. Preserved in great overall condition and further confirmed the production of the present timepiece on 4th of May 1976 by the Omega Extract from the Archives, this is a remarkable opportunity for the collector of historical important and rare vintage pieces.

歐米茄,「Speedmaster Professional Moonwatch」型號PIC 3912.30.00 – BC 384.0062,十分精細罕有,限量版白金計時鏈帶腕錶,備銀色錶盤,紀念阿波羅11號 登月任務二十五周年,限量發行500枚,編號第63號,1994年製。附後補證書

Manufacturer Omega

Year 1994

Reference No. PIC 3912.30.00 – BC 384.0062

Movement No. 48’311’519

Case No. 63/500

Model Name Speedmaster Professional Moonwatch “25th Anniversary Apollo XI”

Material 18K white gold

Calibre Manual, cal. 864, 17 jewels

Bracelet/Strap 18K white gold Omega bracelet, endlinks stamped “842” max length 180mm

Clasp/Buckle 18K white gold Omega deployant clasp

Dimensions 42mm diameter

Signed Case, dial, movement, bracelet and clasp signed

Estimate

HKD 160,000-320,000

USD 20,500-41,000

Accessories

Delivered with an Omega Extract from the Archives confirming production of the present watch with silvered dial and luminous indexes on 16th September 1994 and its subsequent delivery to Hong Kong.

The Omega Speedmaster Professional Moonwatch is one of the world’s most iconic timepieces. Having been a part of all six moon landings, the legendary chronograph is an impressive representation of the Omega’s adventurous pioneering spirit. They were released in 1994 in three different versions of limited editions to mark the 25th anniversary of Apollo XI mission to the moon, with a numbered series of 2,500 pieces in stainless steel, a numbered series of 50 skeleton watches in platinum and finally the present lot that is produced in a limited edition of 500 pieces in white gold.

This limited edition cased in white gold came in two versions, one fitted with a white gold bracelet (reference 3192.30 the present lot) and on a leather strap (reference 3692.30). This luxurious model in white gold is fitted with a rhodiumplated chronometer-rated cal. 864 movement. The silvered dial is inscribed ‘CHRONOMETER’ with the caseband engraved ‘APOLLO XI 1969 – 1994’.

The present example numbered 63 from 1994, confirmed by an Omega Extract from the Archives is offered in exceptional overall condition with a beautifully aged yellow patina on the lumes of the dial.

歐米茄,「X-33 Flightmaster Prototype」型號,極度獨特罕有,原型鈦金屬電子

石英兩地時區萬年曆計時腕錶,備響鬧功能,約1996年製

Manufacturer Omega

Year Circa 1996

Case No. 10/22

Model Name X-33 Flightmaster Prototype

Material Titanium

Calibre Quartz, cal. E20.301

Bracelet/Strap Shark

Clasp/Buckle Omega stainless steel deployant clasp

Dimensions 41mm diameter

Signed Case, dial and clasp signed

Estimate

HKD 63,000-130,000 Σ

USD 8,100-16,700

Omega is no stranger to producing watches for space exploration, having designed the first timepiece to accompany Neil Armstrong and Buzz Aldrin to the moon in the 1960s. On the advice of Mr. James Ragan, an analog time display was added to the design specification of the upcoming model to ensure that a display of time would remain functional and visible at all times, even when – during exposure to extreme temperatures during an EVA (Ectra Vehicular Activity) – the digital portion of the display on the LCD screen would render itself unreadable.

Initially prototyped and tested under the name Flightmaster, reminiscent of the famous pilot’s chronograph Omega introduced in 1969, the first incarnations of this amazing chronograph passed unscathed all tests in the hands and on the wrists of pilots and astronauts alike. Destined to become a classic within the Speedmaster’s legendary family, this project was to be the birth of what became the Speedmaster X-33. With its titanium case and multi-function movement, it showcases many of the ideas proposed by Omega with the Alaska I, Alaska IV and Condor projects and prototypes.

The X-33 Flightmaster prototype is identified by the larger red minute hand. Titanium was chosen as the ideal case material due to the fact that it is hypo-allergenic, non-ferrous, non-magnetic, light, and extremely robust. The watch also has analogue as well as digital display with many higher functions such as the display of military time, Universal Time (GMT) and mission elapse time (MET) with an alarm function for each. Two versions of the prototype were made. The first, produced in 100 examples, featured a single caseback, giving a low-decibel alarm. The present example is part of the second version prototype with a double caseback that amplified the alarm to 80 decibels. Only 22 examples of this version were produced, making this present timepiece an exceptionally rare development prototype for the multipurpose chronograph that was to become the Speedmaster X-33.

歐米茄,「Speedmaster, the Golden Panda」型號BA 145.0122,非常精細及十分

罕有,限量版黃金計時腕錶,特為日本市場限量發行40枚,編號1號,1997年製。

附錶盒、原裝證書、後補證書

Manufacturer Omega

Year 1997

Reference No. BA 145.0122

Movement No. 48’377’318

Case No. 48’377’318, 01/40

Model Name Speedmaster Professional “Golden Panda”

Material 18K yellow gold

Calibre Manual, cal. 1861, 18 jewels

Bracelet/Strap Leather

Clasp/Buckle 18K yellow gold Omega pin buckle

Dimensions 42mm diameter

Signed Case, dial, movement and buckle signed

Estimate

HKD 320,000-630,000

USD 41,000-80,800

Accessories

Accompanied by Omega International Warranty, outer packaging and fitted presentation box. Further delivered with an Omega Extract from the Archives confirming the date of production of the present timepiece on 17th October 1997 and its subsequent delivery to Hong Kong.

Handsome, rare and sought-after by Speedy enthusiasts, “The Golden Panda” was first released in 1997 specifically for the Japanese market. With its obvious nickname deriving from the attractive white dial with black registers and chaptering, the appeal against its solid 18K yellow gold case is with no doubt a crowd pleaser. Contrasting beautifully with all of its other elements, the black bezel insert heightens the appeal of the “Panda” dial. A similar design was used in the 2016 Omega Speedmaster Limited Edition with blue tachymeter bezel, white dial, and blue sub-registers, to much success.

The present example Omega Speedmaster ref. BA 145.0122 “Golden Panda” is certainly the most desirable example to ever appear at any auction as it is numbered 1 of a limited edition of 40 pieces, being the very first one produced. Not only that, but it is also well-preserved with an unpolished case and comes complete with its original guarantee and presentation box as well as an Extract from the Archives confirming the production of the present timepiece with its corresponding movement numbers in 1997. A sight to behold, this present “Golden Panda” will surely garner excitement within the Speedy community.

勞力士,「Cosmograph Daytona」型號6262,精細罕有,精鋼計時鏈帶腕錶, 約1970年製

Manufacturer Rolex Year Circa 1970

Reference No. 6262

Case No. 2’547’470; inside caseback stamped “6239”

Model Name Cosmograph Daytona

Material Stainless steel

Calibre Manual, cal. 727, 17 jewels

Bracelet/Strap Stainless steel riveted Rolex Oyster bracelet, max length 195mm

Clasp/Buckle Stainless steel Rolex Oyster deloyant clasp stamped Rolex U.S.A “7-72”

Dimensions 36mm diameter

Signed Case, dial, movement, bracelet and clasp signed

Estimate

HKD 320,000-630,000

USD 41,000-80,800

Accessories

Accompanied by Rolex Japan service invoice and green leather holder.

At Rolex, 1970 was marked by the launch of two Cosmograph references; the 6262 with the silver bezel and the 6264 with an acrylic bezel. Very similar to the previous generation, these two references were considered as a transitional reference and were fitted with the upgraded caliber 727 and featured pump pushers. The production of the reference ceased around 1972, making way for two new references with upgraded screw-down pushers, ref. 6263 & 6265.

The present reference 6262 is a rare variant due to the arched ‘blue’ Daytona signature at 6 o’clock. A defect in the pigment turned the Daytona signature into an attractive and subtle light blue shade. Thus, earning its nickname amongst the collectors as ‘Baby Blue’. Bearing a 2.5 million serial form circa 1970, the present 6262 is extremely well-preserved boasting a strong case and impeccable dial with silver print contrasting with its attractive faded baby blue inscription. The condition alone is a rare find for the reference 6262, let alone the special hint of blue on the dial, this example will certainly please the discerning collectors of the racing legend.

勞力士,「Sea-Dweller」型號1665,精細罕有,精鋼自動鏈帶腕錶,

備「Double Red MK II」棕色錶盤、日期、中心秒針、排氦裝置,約1968年製

Manufacturer Rolex

Year Circa 1968

Reference No. 1665

Movement No. D’388’296

Case No. 1’760’311, inside caseback stamped “311”, “IV.67”

Model Name Sea-Dweller, “Double Red MK II”

Material Stainless steel

Calibre Automatic, cal. 1570, 26 jewels

Bracelet/Strap Stainless steel Rolex Oyster bracelet stamped “9315”, endlinks stamped “380”, max length 190mm

Clasp/Buckle Stainless steel Rolex Oyster deployant clasp

Dimensions 40mm diameter

Signed Case, dial, movement, bracelet and clasp signed

Estimate

HKD 310,000-630,000

USD 39,700-80,800

Attractive, durable and capable, it is no wonder why the Double Red SeaDweller has been dubbed a cult favourite, not only among vintage Rolex collectors, but also diving professionals. Designed to be worn at great depths, it is equipped with an exclusive helium expulsion valve that is indispensable during the decompression process after surfing the deepest parts of the ocean. While the ref. 1665 was officially released in 1971, the first examples of the reference were unofficially produced since 1967. The highly coveted “double red” lines were ceased in 1977 and subsequently replaced by white writing on the dial until the end of the reference’s production in 1981.

Of all the dial configurations seen on the ref. 1665, the “Mark II” dials are perhaps the most coveted, thanks to a few distinctive desirable features. The most apparent characteristic of this dial is the crisp and well-defined print of the lines “Sea-Dweller, Submariner 2000” in bright red. The font is also smaller on the second line. Another interesting nuance is that the coronet spikes are distorted and the "O" under it is almost non-existent.

Bearing a 1.7 million serial, the present Double Red Sea-Dweller is offered in excellent condition for its age, and has been well looked after over the last five decades. While the bezel has developed into an attractive light grey hue, the dial captured within has aged with a beautiful tropical hue further enhancing the vintage aesthetic collectors look for.

A fine and rare stainless steel dual-time wristwatch with center seconds, date, “radial dial”, "fuchsia" bezel and bracelet

勞力士,「 GMT-Master, MK III Radial Dial 」型號1675,精細,精鋼自動兩地時區 鏈帶腕錶,中心秒針、日期顯示,約1977年製

Manufacturer Rolex

Year Circa 1977

Reference No. 1675

Movement No. D573’078

Case No. 5’302’945

Model Name GMT-Master, MK III Radial Dial

Material Stainless steel

Calibre Automatic, cal. 1570, 26 jewels

Bracelet/Strap Stainless steel Rolex Oyster bracelet stamped “78360”, endlink stamped “580”, max length 190mm

Clasp/Buckle Stainless steel Rolex Oyster deployant clasp stamped “CL12”

Dimensions 40mm diameter

Signed Case, dial, movement, bracelet and clasp signed

Estimate

HKD 120,000-200,000

USD 15,400-25,600

First making its debut in 1959, the Rolex GMT-Master ref. 1675 is one that is adored by vintage Rolex collectors globally due to its iconic status and its timeless appeal. Early examples of the reference were fitted with glossy gilt dials and in 1966, Rolex transitioned the production of the dials to matte from glossy. With various examples of the matte dial throughout its course of production, these variants were broken into marks until its discontinuation of the reference in 1979, where Rolex once again introduced an upgraded glossy dial which were featured all the way until the end of the entire reference in 1984.

The present example Rolex GMT-Master ref. 1675 with a 5.3 million serial from circa 1977 features the rare and desirable MK III radial dial, which is distinguishable via its waffle-like luminous plots and its tall and narrow SCOC designation on the dial and the centred placement of the luminous plots compared to other variants from different marks. Offered in attractive overall condition, the present example boasts a well-preserved dial with nice luminous plots and a sharp case paired beautifully with a faded fuchsia bezel insert.

909.

勞力士,「Oyster Perpetual Date」型號1500,精細,精鋼自動鏈帶腕錶, 備中心秒針、日期顯示,約1978年製。附原裝證書、錶盒、配件

Manufacturer Rolex

Year Circa 1978

Reference No. 1500

Movement No. 5’782’466

Model Name Oyster Perpetual Date

Material Stainless steel

Calibre Automatic, cal. 1570, 26 jewels

Bracelet/Strap Stainless steel Rolex Oyster bracelet stamped “78350”, endlinks stamped “557”, max length 185mm

Clasp/Buckle Stainless steel Rolex Oyster deployant clasp

Dimensions 34mm diameter

Signed Case, dial, movement, bracelet and clasp signed

Estimate

HKD 32,000-63,000

USD 4,100-8,100

Accessories

Accompanied by Rolex guarantee stamped Yoshikawa Shoten, Tokyo dated 26 July 1980, product literature, wallet, hang tags, presentation box and outer packaging.

Introduced in 1955, the Rolex Oyster Perpetual Date remains a timeless and classic model in the Rolex lineup, embodying the spirit of the Oyster Perpetual, the first self-winding waterproof wristwatch invented by Rolex, with an added Cyclops lens date window for ease of reading.

The present ref. 1500 from circa 1980 is a beautifully preserved “new-oldstock” Oyster Perpetual Date that has aged to an attractive character. Featuring a timeless silver dial, the watch is exceedingly simplistic yet elegant. Suitable for any occasion, the timepiece exhibits a near-pristine case with crisp lugs, and the case back is accompanied by its original factory sticker. It is further accompanied by its original complete set of accessories, guarantee and presentation box.

910.

Manufacturer Rolex

Year Circa 1967

Reference No. 1019

Movement No. M612’940

Case No. 1’617’469, inside caseback stamped II.67

Model Name Milgauss ‘MK1’

Material Stainless steel

Calibre Automatic, cal. 1560, 26 jewels

Bracelet/Strap Stainless steel Rolex Oyster bracelet stamped “7836”, endlinks stamped “280”, max length 195mm

Clasp/Buckle Stainless steel Rolex Oyster deployant clasp stamped “1.71”

Dimensions 38mm diameter

Signed Case, dial, movement, bracelet and clasp signed

Estimate

HKD 120,000-200,000

USD 15,400-25,600

Accessories

Accompanied by Rolex product literature, hang tag, outer packaging and fitted presentation box.

In the early 1960s, Rolex introduced the Milgauss ref. 1019 replacing its former references. Refreshed in its appeal with an upgraded and modernized robust stainless steel Oyster 38mm diameter case, the inner caseback retains its formidable anti-magnetic cage protecting the movement. The reference was available in either a silver or black dial and was discontinued in 1990.

The present example Rolex Milgauss ref. 1019 with a 1.6 million serial belongs to the first series of the reference from circa 1967 as it features luminous material sandwiched in between the 3,6 and 9 o’clock indexes. Preserved in original overall condition with no signs of polishing and a very sharp case, this present honest example is one for vintage collectors to look out for.

A fine and attractive stainless steel dual-time wristwatch with center seconds, date, bracelet, guarantee and presentation box

勞力士,「GMT-Master」型號16750,精細,精鋼自動兩地時區鏈帶腕錶, 備中心秒針、日期顯示,約1984年製。附原裝證書、錶盒

Manufacturer Rolex

Year Circa 1984

Reference No. 16750

Movement No. 1’048’166

Case No. 8’566’830, repeated inside caseback 16750

Model Name GMT Master

Material Stainless steel

Calibre Automatic, cal. 3075, 27 jewels

Bracelet/Strap Stainless steel Rolex Oyster bracelet stamped “78360”, endlinks stamped “558 B”, max length 190mm

Clasp/Buckle Stainless steel Rolex Oyster deployant clasp stamped “U5”

Dimensions 40mm diameter

Signed Case, dial, movement, bracelet and clasp signed

Estimate

HKD 68,000-130,000

USD 8,700-16,700

Accessories

Accompanied by Rolex guarantee stamped Uheren Sonntag Germany and dated 2nd July 1986, instruction manual, Rolex green card holder, fitted presentation box and outer packaging.

Making its debut in 1980, the Rolex GMT-Master ref. 16750 was the successor to the iconic ref. 1675 that was in production since 1959. While most examples of the new reference featured a glossy black dial with white gold luminous filled indexes, early examples of the reference featured a matte black dial similar to the ones on ref. 1675. Though its general aesthetics are very much retained, the ref. 16750 is fitted with a then-new cal. 3075 running at 28,800 bph compared to its previous 19,800 bph. Notably, it was updated with a practical quick-set date function. Its water resistance was also improved by doubling its previous depth rating from 50 meters to 100 meters. After a successful 8-year production run, the ref. 16750 was subsequently discontinued in 1988 to make way for the ref. 16760.

The present example Rolex GMT-Master ref. 16750 with a 8.5 million serial from circa 1984, featuring a well-preserved matte black dial. Offered in attractive overall condition and complete with its original guarantee and presentation box, it is perhaps the vintage appeal combined with its practical functioning that collectors adore about the ref. 16750.

Manufacturer Rolex

Year Circa 1978

Reference No. 1665

Movement No. D837’612

Case No. 5’804’625, repeated inside caseback 1665

Model Name Sea-Dweller, “Rail Dial”

Material Stainless steel

Calibre Automatic, cal. 1570, 26 jewels

Bracelet/Strap Stainless steel Rolex Oyster bracelet stamped “93150”, endlinks stamped “580”, max length 190mm

Clasp/Buckle Stainless steel Rolex Oyster deployant clasp

Dimensions 40mm diameter

Signed Case, dial, movement, bracelet and clasp signed

Estimate

HKD 120,000-250,000

USD 15,400-32,100

Enhancing its rarity, the present example Rolex Sea-Dweller ref. 1665 features a MK II “rail dial” that was only in production for a mere two years from 1977 to 1979 with its serial ranging from 5.7 million to 6.2 million. These “rail dials” were made by the famous Stern Company instead of Singer. Distinguished by subtle details on the dial, the “C” of “CHRONOMETER” lines up perfectly with the “C” from “CERTIFIED” creating an unusual vertical corridor or rail between the last two lines of the designation. Another trait of that separates it from the rest is that it features “T SWISS T <25”.

The present example Sea-Dweller ref. 1665 with a 5.8 million serial from circa 1978 features the rare and elusive MK II Rail Dial that is well-preserved with attractive lume plots and a ghost bezel that elevates its vintage appeal.

勞力士,「Datejust」型號16200,精細罕有,精鋼自動鏈帶腕錶,備天然藍色方納石 錶盤、鑽石時標、中心秒針、日期、星期顯示,約1999年製。附原裝證書、錶盒

Manufacturer Rolex

Year Circa 1999

Reference No. 16200

Case No. A’138’088

Model Name Datejust

Material Stainless steel

Calibre Automatic, cal. 3135, 31 jewels

Bracelet/Strap Stainless steel Rolex Oyster bracelet stamped “78360”, endlinks stamped “558B”, max length 190mm

Clasp/Buckle Stainless steel Rolex Oyster deployant clasp

Dimensions 36mm diameter

Signed Case, dial, movement, bracelet and clasp signed

Estimate

HKD 78,000-160,000 •

USD 10,000-20,500

Accessories

Accompanied by Rolex guarantee stamped Cathay Watch Co., LTD Hong Kong and dated March 1999, instruction manual, product literature, 1999 - 2000 calendar, leather card holder, fitted presentation box and outer packaging.

Lot Offered With No Reserve

Hardstone dials are among the most attractive and collectable dials to have ever found their way into the Datejust line. Beyond the present sodalite, other stones have been employed by Rolex: onyx, malachite, marble, agate and jade are just some examples of this remarkable diversity.

This sublime Datejust is fitted with a beautiful and very rare blue sodalite dial with diamond-set indexes. With no two dials being the same, the unique deep blue “mottled pattern” surface of the sodalite dial perfectly complements the stainless steel case and white diamond hour markers. As with all hard-stone dials, the calendar windows are framed in white metal. Framed in a contemporary smooth bezel, the present timepiece stands out from its peers that bear a traditional fluted bezel.

Offered in attractive overall condition, the present Rolex Datejust ref. 16200 is a sight to behold for passionate collectors of hardstone dials.

Rolex

勞力士,「Day-Date」型號18206,鉑金自動鏈帶腕錶,備天然青金石錶盤、 鑽石時標、日期、星期顯示、中心秒針,約1988年製

Manufacturer Rolex

Year Circa 1988

Reference No. 18206

Movement No. 5’288’246

Case No. R905’773, inside caseback stamped 18200

Model Name Day-Date

Material Platinum

Calibre Automatic, cal. 3155, 31 jewels

Bracelet/Strap Platinum Rolex President bracelet, max length 175mm

Clasp/Buckle Platinum Rolex concealed folding clasp

Dimensions 36mm diameter

Signed Case, dial, movement, bracelet and clasp signed

Estimate

HKD 160,000-320,000

USD 20,500-41,000

Accessories

Delivered with Rolex Service papers stamped Rolex Singapore and dated 26th February 2021.

Worn by many, loved by most. The Day-Date, also widely known as the “President” watch, is one of the most coveted models in the Rolex catalogue. The present ref. 18206 bears an “R” serial and was manufactured in 1987. Encased in platinum, this stunning example is fitted with an organic Lapis Lazuli dial with slight shimmers of gold, resembling the deep blue waves that play with the sun on the Ionian Sea. This timepiece is driven by the reliable in-house cal. 3155. The perfect travel companion, it is fixed with a quick-set feature, enabling its wearer to change the date and day with ease.

Rolex

勞力士,「Cosmograph Daytona」型號116509,精細罕有,白金計時自動鏈帶 腕錶,備綠玉髓石錶盤,約2005年製。附錶盒、原裝證書、配件

Manufacturer Rolex

Year Circa 2005

Reference No. 116509

Case No. D004’968

Model Name Cosmograph Daytona

Material 18K white gold

Calibre Automatic, cal. 4130, 44 jewels

Bracelet/Strap 18K white gold Rolex Oyster bracelet, max length 200mm

Clasp/Buckle 18K white gold Rolex Oyster deployant clasp

Dimensions 40mm diameter

Signed Case, dial, movement, bracelet and clasp signed

Estimate

HKD 200,000-360,000

USD 25,600-46,200

Accessories

Accompanied by Rolex guarantee stamped Horl Augsburg, Germany dated 30th May 2005, Rolex service guarantees, instruction manual, hang tag, green leather holder, fitted presentation box and outer packaging.

Introduced in 2000 alongside its stainless steel counterpart ref. 116520, the Rolex Cosmograph Daytona ref. 116509 features the upgraded and Rolex’s first ever in-house self-winding chronograph movement cal. 4130. Hefty, steady and robust, the Rolex Cosmograph Daytona ref. 116509 is the first Daytona to be encased in 18K white gold with matching bracelet during 2005.

On top of the lavish upgrade of gold, the present ref. 116509 features a stunning precious hard stone dial known as chrysoprase. Mint green in color the hard stone dial can also be found on the Rolex Daytona Beach series ref. 116519 unveiled during the millennium. Today, these watches are rare collector’s items. Preserved in excellent overall condition and accompanied with its guarantee and accessories, this chrysoprase Daytona is certainly a breathe of fresh air and perfect for the upcoming summer.

勞力士,「Day-Date」型號118296,精細罕有,鉑金鑲鑽自動鏈帶腕錶,備銀色 錶盤、鑽石時標、中心秒針、日期、星期顯示,約2000年製。附原裝證書、錶盒

Manufacturer Rolex

Year Circa 2000

Reference No. 118296

Movement No. 8’455’115

Case No. P’194’772

Model Name Day-Date

Material Platinum

Calibre Automatic, 3155, 31 jewels

Bracelet/Strap Platinum Rolex President bracelet, max length 190mm

Clasp/Buckle Platinum Rolex concealed folding clasp

Dimensions 36mm diameter

Signed Case, dial, movement, bracelet and clasp signed

Estimate

HKD 130,000-250,000

USD 16,700-32,100

Accessories

Accompanied by Rolex guarantee stamped Kaimana Kea USA and dated 19th January 2002, leather card holder, instruction manual, product literature, Rolex leather notepad cover with notepad and pen, two additional notepads, fitted presentation box and outer packaging.

Synonymous with sophistication, precision and timelessness, the Day-Date was truly a game-changer upon its debut in the 1950s. Since then, the model has come to fruition with various upgrades it has undergone over its generations, whilst maintaining its flare by an array of colours, material and design it has to offer.

Framed in the king of all metals, this platinum ref, 118296 is tastefully adorned in brilliant cut diamonds, from its lugs to its dial. A rare bird in the family of DayDates, it is fitted with a smooth bezel which encircles a rare silvered sunburst dial that is further charmed with diamond-set indexes. Offered in excellent overall condition, the present example boasts an unpolished case with sharp and crisp edges and is accompanied by its original accessories. For collectors who appreciate a subtle bit of bling combined with timeless design and rarity, this is certainly an outstanding addition to any collection of fine Day-Dates.

A fine and attractive platinum world time wristwatch with guilloche dial, Certificate of Origin and presentation box, retailed by Tiffany & Co.

由蒂芙尼銷售,約2001年製。附原裝證書、錶盒

Manufacturer Patek Philippe

Year Circa 2001

Reference No. 5110P-001

Movement No. 3’207’038

Case No. 4’142’722

Model Name World Time

Material Platinum

Calibre Automatic, cal. 240 HU, 33 jewels

Bracelet/Strap Leather

Clasp/Buckle Platinum Patek Philippe deployant clasp

Dimensions 37mm diameter

Signed Case, dial, movement and clasp signed

Estimate

HKD 240,000-400,000 Σ

USD 30,800-51,300

Accessories

Accompanied by Patek Philippe Certificate of Origin stamped Tiffany & Co., and date-coded June 2001, instruction manual, product literature, leather folio, additional Patek Philippe black crocodile strap, fitted presentation box, outer packaging and Tiffany outer packaging.

Both watch collectors and travel enthusiasts have particularly favoured the World Time complication. Since its release in the year 2000, the Patek Philippe ref. 5110 has enjoyed instant recognition for allowing its wearer to quickly identify the timezones of 24 different cities with no hesitation. Boasting distinct Patek Philipe proportions, this reference is very attractive, featuring subtle yet intricate finishing touches on both its dial and its case. The multifaceted dial is composed of two peripheral rotary discs, where the inner disc details the respective timezones of the cities listed on the outer ring.

Retailed by the esteemed Tiffany & Co, the present platinum World Time ref. 5110P-001 is a rare specimen, bearing a hand-engraved designation of the retailer along the caseband at 9 o’clock. This quiet giant is measured at 37mm, fitted with smooth straight lugs and is a quintessential Calatrava through and through.

New at the time to Patek Phillippe, the hands are defined by their contours that flatter the baton-shaped applied hour markers. Taking cues from the manufacturer’s heritage as masters of pocket watches, the centre of the dial also features hand-engraved guilloche patterns that bring depth to the flat surface. Closed with a sapphire caseback, the wearer is also invited to admire its uber-thin cal. 240HU is an automatic movement that is technically sound and as beautifully finished as its dial, with Geneva stripes, perlage and anglage.

To the best of our knowledge, the present ref. 5110P is the first known example embellished with a hand-engraved Tiffany & Co. designation along its caseband. Offered in excellent overall condition, this rare gem is further accompanied by its original accessories with a Patek Philippe Certificate of Origin delivered with a Tiffany & Co. stamp.

Patek Philippe

A fine and attractive white gold world time wristwatch with guilloché dial and bracelet

百達翡麗,型號5110G-001,精細,白金自動世界時區鏈帶腕錶,

備璣鏤扭索紋錶盤,2001年製。附後補證書

Manufacturer Patek Philippe

Year 2001

Reference No. 5110G-001

Movement No. 3’207’164

Case No. 4’141’930

Model Name World Time

Material 18K white gold

Calibre Automatic, cal. 240 HU, 33 jewels

Bracelet/Strap 18K white gold Patek Philippe bracelet, max length 200mm Clasp/Buckle 18K white gold Patek Philippe folding clasp

Dimensions 37mm diameter

Signed Case, dial, movement, bracelet and clasp signed

Estimate

HKD 240,000-400,000

USD 30,800-51,300

Accessories

Delivered with Patek Philippe Extract from the Archives confirming the present timepiece’s date of manufacture in 2001 and its subsequent date of sale on 31st August 2001.

The present timepiece is a ref. 5110G, encased in white gold. A quiet giant, the case is measured at 37mm, featuring smooth straight lugs and is quintessentially a Calatrava through and through. New at the time to Patek Phillippe, the hands are defined by their contours that flatter the batonshaped applied hour markers. Taking cues from the manufacturer’s heritage as masters of pocket watches, the center of the dial also features handengraved guilloche patterns that bring depth to the flat surface. The sapphire caseback invites the wearer to admire its uber-thin cal. 240HU, an automatic movement that is not only technically sound but is as beautifully finished as its dial, with Geneva stripes, perlage and anglage.

Presented in excellent overall condition, the present white gold 5110G is further elevated with a highly desirable, complementary Patek Philippe white gold Grain de Riz bracelet. Fresh-to-the-market, the present lot is the 88th example to be identified in white gold and will no doubt be a great addition to any collection.

This article is from: