FOR SALE
TRAILER TARP KITS - MESH OR CANVAS TARPS - EASY TO USE CAN BE MOUNTED ON MOST TRAILER TYPES!!!
CALL TODAY! (780) 448-9659 12871 - 170 ST NW Edmonton, AB www.piercecocanvas.com
TRAILER TARP KITS easy to use and can be mounted on most trailers common choices for the tarp materials are mesh or 12 oz. treated canvas reinforced hems make them durable for even the toughest uses the cover winds up effortlessly due to the winch installed on the driver side two hooks at the back secure the canvas when rolled out a rope is used to lock the tarp in both positions custom sizes and materials available
FOR MORE INFORMATION
(780) 448-9659 dlpierce@telus.net
TRAILER TARP KITS
INSTALLATION INSTRUCTIONS Install the roller mounting plate at the front of the passenger side of the box. Drill 1/4” holes and install the 5/16” self tapping screws. Attach the winch to the mounting bracket using 2-3/8” x 1’ volts. Slide the roll pipe through a loop on the tarp the slip the end of the roll pipe through the mount plate. Install the winch mount bracket on the drivers side of the box by drilling 1/4” holes then inserting the 5/16” self tapping screws into the holes. Slip the stop collar onto roll pipe outside outside the passenger mount plate. Tighten collar snugly to hold roll pipe in position. Cut off excess roll pipe. Position the tarp in the center of the truck box, on the roll pipe. Install a U-clamp at one side of the tarp holding the clamp in position and drilling a 3/32” hole through the tarp into the roll pipe. Holding the U-clamp in position install a 3/16” self tapping screw. Stretch the tarp along the roll pipe and install a U-clamp at the other end of the tarp. Install the two remaining U-clamps evenly spaced along the tarp. * It is important to make sure the 3/16” screws pull the U-clamps tight to the roll pipe. * Install pipe hooks using 5/16” self tap screws. Hooks can be placed on top or on rear of box. Install rope hook assembles, one on drivers side near the front and the other, center of rear using 5/16” self tap screws.
FOR MORE INFORMATION
(780) 448-9659 dlpierce@telus.net
TRAILER TARP KITS
OPERATING THE TARP Pull the rope to close tarp. Catch the pipe in pipe hooks. Increase the tension on tarp with handle ratchet. Wrap excess rope on rope hooks.
FOR MORE INFORMATION
(780) 448-9659 dlpierce@telus.net