2015
2015
P.O. Box 82000 | Phoenix, AZ 85071 602.687.5000 | www.ping.com
PING, G30, Cadence, Glide, Eye2, Thrive, Moxie, TFC, CFS, Gorge, Anser, Ketsch, B65, Tomcat, Shea, Rustler, Dyla-wedge, True Roll Technology, Turbulator Technology, Trajectory Tuning+ Technology, SF Tec and LS Tec are registered and unregistered trademarks of Karsten Manufacturing Corporation in the U.S. and other countries. All other registered and unregistered trademarks are the property of their respective owners. ŠPING 2015 Printed 01/15
//////////////////////////////////////////////////
GOLF EQUIPMENT
GAINING DISTANCE, CONTROL AND ACCURACY – WITHOUT SACRIFICE. researchers. An increase in distance, for example, doesn’t sacrifice attributes like forgiveness, control, feel, or sound. This philosophy is best represented in the G30 driver – our newest game-changing technology. Patented Turbulator Technology on the crown and a new face material are two innovations that contribute to making the G30 driver our longest and most forgiving design
02. . . . G30 DRIVERS ®
ever. It’s a multiple winner on tour and a favorite of golfers of every skill level, earning
Crown turbulators and a low-back CG make these adjustable drivers our longest, most forgiving to date.
the #1-selling status after just two months on the market (Golf Datatech LLC, October 2014).
04. . . . G30 IRONS
TURBULATOR TECHNOLOGY PROVEN IN WIND-TUNNEL TESTING
INTRODUCTION
WHAT'S INSIDE
Engineering clubs “Without Sacrifice” requires true innovation of our engineers and
Progressive lengths and lofts and a thin face provide distance with control.
06. . . . G30 FAIRWAY WOODS
1
Available in 3 options
A hot forgiving Carpenter 475 face maximizes deflection to increase ball speed for added distance. Adjustable ± 1 º.
08. . . . G30 HYBRIDS Faster ball speeds and longer distance with a higher max shot height ensure the stopping power to hold greens.
WITH TURBULATORS
10. . . . GLIDE™ WEDGES Engineered from the hands down for short-game performance and trajectory control on shots of every length.
WITHOUT TURBULATORS
The new Glide wedges have met with overwhelming acceptance on tour and G30 Iron
immediately found their way into the winner’s circle. We took a first-ever approach to designing the wedges, engineering them from the hands down to
11 . . . . EYE2® GORGE WEDGES
provide trajectory control on shots of every length. In the Cadence TR putters, we’ve advanced putter fitting by matching the head weight to a golfer’s
Gorge grooves give the timeless Eye2 sand and lob wedges exceptional spin and stopping power.
stroke tempo and feel preference.
12. . . . CADENCE ™ TR® PUTTERS
Our commitment to custom fitting is evident throughout all the new products.
Traditional and heavy options to fit a golfer’s stroke tempo.
When perfectly fit with their unique specifications, golfers are able to realize the full benefits of PING technology by shooting lower scores and enjoying the
14. . . . THRIVE ™ SET Ten-club set for early teens provides a transition between PING’s Moxie junior sets and our adult-sized equipment.
game more than ever. For more than 55 years, PING customers have come Glide Wedge
to expect the most-advanced clubs in golf, helping them play their best – without sacrifice.
15. . . . MOXIE® JUNIOR SETS Three Moxie sets are suited for different age groups and height ranges to fit the youngest golfers.
CADENCE TR PUTTERS
GLIDE WEDGES
Traditional Insert
Engineered with a wedgeexclusive grip and shaft, and heads featuring a moisture-repelling finish and loft-optimized Gorge grooves to increase spin and consistency from any distance.
16. . . . CUSTOM AND EXOTIC SHAFTS Custom-order and exotic products allow golfers to optimize their equipment.
Cadence TR Putter
17. . . . CUSTOM GRIPS AND GRINDS PING’s Wrx department offers multiple grind options to help players execute all varieties of shots. Heavy Insert
2
Turbulators engineered onto the crown of the Ti 8-1-1 head improve aerodynamics by reducing drag forces on the downswing, leading to faster clubhead speed and ball velocity for longer drives that find the fairway. Turbulators also can assist with aim and alignment.
FASTER GOES FARTHER. Three options engineered to match a variety of ball flight and launch conditions ensure a G30 driver for golfers of all abilities. Turbulator Technology helps generate faster clubhead and ball velocity for consistently longer, more accurate drives. The T9S titanium face is thinner for faster ball speeds, and lighter to keep the CG low-back for optimal launch and spin with a high MOI. With Trajectory Tuning+ Technology, players can fine-tune launch conditions using five settings.
LOW-BACK CG AND HIGH MOI
STANDARD MODEL Head Size Lofts Std. Length Lie Angle Head Weight Std. Swingweight
460cc 9º, 10.5º 45.75" 59.00º 206g D3
Weight savings from the T9S titanium face help position the CG lower and farther back than any PING driver to date to create optimal launch conditions while providing the highest MOI in the industry. This unique combination – a proven PING innovation – delivers extreme forgiveness for unmatched consistency.
3
5-LOFT ADJUSTABILITY Add or subtract either 0.6º or 1º of loft using Trajectory Tuning+ Technology. Settings are standard, +0.6º, +1º, -0.6º and -1º.
3 FITTING OPTIONS
HOTTER T9S FACE A new high-strength, lightweight T9S titanium face is thinner and hotter to maximize face deflection for faster ball speeds with a high MOI and deep, powerful sound.
G30 STANDARD
G30 SF TEC
G30 LS TEC
All-Around Performance
Right-to-Left Shot Bend
Low, Stable Spin; Forgiving
TOUR 65 & 80
TFC 419D
TFC 419D This high-balance-point shaft has a CG closer to the grip end, creating a simultaneous increase in the clubhead’s energy, momentum and inertia.
TOUR 65 & 80 PING’s premium after-market shafts launch the ball lower with less spin and a stable feel.
G30 SF TEC DRIVER
G30 LS TEC DRIVER
The G30 SF Tec driver (Straight-Flight Technology) has weight closer to the heel and a lighter swing weight to produce a right-to-left shot bend. For players whose shots typically end up right of the intended target, this model helps steer the ball back into the fairway.
The G30 LS Tec driver (Low-Spin Technology) has a CG that is back and extremely low, with a high launch-angle-to-spin ratio. The CG is slightly forward of the standard G30 driver and it best fits players who desire very low spin without sacrificing off-center performance.
SHAFT SPECIFICATIONS
SOFT R
REGULAR
STIFF
X-STIFF
5.9º 53g
5.0º 55g
4.9º 59g
4.2º 63g
4.3º 57g
3.4º 61g
3.2º 66g
3.3º 68g
2.9º 75g
2.8º 80g
TFC 419D Torque Weight
TOUR 65* Torque Weight
TOUR 80* Torque Weight *Std. length = 45.25"
DRIVERS
DRIVERS
TURBULATOR TECHNOLOGY
Head Size 460cc Lofts 10º, 12º Std. Length 45.75" Lie Angle 59.00º Head Weight 203g Std. Swingweight D1
Head Size 460cc Lofts 9º, 10.5º Std. Length 45.75" Lie Angle 59.00º Head Weight 206g Std. Swingweight D3
SOLID SOUND, FEEL
IRONS
IRONS
A soft elastomer cavity badge further contributes to exceptional feel and sound in the highly forgiving, perimeterweighted design.
BUILT FOR DISTANCE AND CONTROL.
4
Progressive lengths and lofts and a thin face optimize launch conditions and generate faster ball speeds, ensuring maximum distance and control to consistently knock the ball close. The Custom Tuning Port (CTP) contributes to a solid feel and a low-back CG for launching the ball high and straight. Slightly longer heads also boost MOI for improved off-center performance, and a new sole design promotes solid contact.
FORGIVING DESIGN Slightly longer blade lengths help to increase MOI for greater forgiveness and accuracy, most noticeably in the 4 through 7 iron. Progressive offset generates higher ball flights in the longer irons and penetrating, controlled trajectories with the scoring clubs.
5
CONSISTENT RESULTS The sole design is optimized to promote solid contact with consistent trajectories, helping the club glide through the turf, even on imperfect swings. The bounce was increased and balanced with a softer lead edge and steeper trailing edge to improve versatility for all angles of attack.
DISTANCE, CONTROL Distance control and consistent, predictable results are provided by a custom tuning port that sits very low and supports a thin, 17-4 stainless steel face to generate faster ball speeds. The CTP and an undercut cavity help position the CG low-back to optimize launch and forgiveness while ensuring a solid feel.
TFC 419i
XP 95
CFS DISTANCE
SHAFT SPECIFICATIONS
SOFT R
REGULAR
STIFF
X-STIFF
CFS DISTANCE Torque Weight
2.2º 95g
2.1º 100g
1.8º 110g
1.7º 93g
1.7º 95g
2.1º 74g
1.9º 86g
1.6º 115g
XP 95 Torque Weight
TFC 419i Torque Weight
2.5º 70g
PROGRESSIVE SHAFT LENGTHS
The CFS Distance and XP 95 steel shafts and the TFC 419i graphite feature progressive lengths to deliver faster ball speeds and higher launch for added distance. This feature optimizes distance gapping, most notably in the mid and long irons.
G30 IRON SPECIFICATIONS RH & LH CLUB
LENGTH
4 5 6 7 8 9 PW UW SW LW
38.88" 38.25" 37.63" 37.00" 36.50" 36.00" 35.50" 35.50" 35.25" 35.00"
LOFT
LIE
21.00º 59.06º 24.00º 60.00º 27.00º 60.94º 30.50º 61.88º 35.00º 62.81º 40.00º 63.75º 45.00º 64.00º 50.00º 64.00º 54.00º 64.25º 58.00º 64.50º
OFFSET
0.29" 0.26" 0.23" 0.20" 0.18" 0.16" 0.14" 0.12" 0.10" 0.08"
BOUNCE WIDTH
.591" .623" .653" .677" .685" .693" .678" .699" .708" .71 7"
SWT.
D0 D0 D0 D0 D0 D0 D2 D2 D4 D6
These are design specifications that may vary due to manufacturing tolerances. Lie angle based on black color code at standard length. Standard swingweights for graphite-shafted clubs are one point lighter than shown.
Faster ball speeds and greater distance come from a larger face made of Carpenter 475 steel, creating a thin but strong hitting surface that maximizes face deflection. (Carpenter 475 steel is 44% stronger than 17-4 stainless steel.)
A FASTER FACE. A hotter, more forgiving Carpenter 475 face maximizes deflection to increase ball speed and generate distance with control. The taller hitting surface allows for additional bending and elevates the vertical (top to bottom) MOI. Speed-enhancing crown turbulators help with aim and inspire confidence. Five loft settings offer 2 full degrees of adjustability for finetuning trajectory.
PROGRESSIVE CGs A low and deep CG in the 3-wood promotes high launch with a piercing spin. The CG progresses more forward and lower in the 5- and 7-woods to keep launch angle and spin uniquely optimized for distance and control in each clubhead.
7
3W
5-LOFT ADJUSTABILITY Add or subtract up to 1° of loft with Trajectory Tuning+ Technology. Settings are standard, +0.6°, +1°, -0.6°, and -1°. This lightweight, adjustable hosel has the same mass and outer diameter as our fixed hosels to unlock the benefits of adjustability without sacrificing performance.
LARGER, FORGIVING FACE A taller Carpenter 475 steel face allows for additional face bending to generate ball speed and distance with increased forgiveness. The flatter top rail maximizes face size and provides a square appearance.
5W
TURBULATOR TECHNOLOGY
7W
Speed-enhancing crown turbulators create a captured appearance with the ball, and help with aim and alignment to inspire confidence.
TFC 419F TOUR 65 & 80
TFC 419F
This high-balance-point shaft has a CG closer to the grip end, creating a simultaneous increase in the clubhead’s energy, momentum and inertia.
TOUR 65 & 80
3 - wood 14.5º
PING’s premium after-market shafts deliver a lower launch and less spin with a stable feel.
5 - wood 18º
Std. Lie: 57.00º Std. Length: 43.00" 167cc Std. Swt. D1
Std. Lie: 57.50º Std. Length: 42.50" 151cc Std. Swt. D1
SHAFT SPECIFICATIONS
SOFT R
REGULAR
STIFF
X-STIFF
3.6º 63g
3.5º 64g
3.3º 68g
3.2º 69g
4.3º 53g
3.4º 57g
3.2º 62g
3.3º 64g
2.9º 70g
2.8º 76g
TFC 419F Torque Weight
TOUR 65 Torque Weight
TOUR 80 Torque Weight
FAIRWAY WOODS
FAIRWAY WOODS 6
CARPENTER 475 FACE
7- wood 21 º
Std. Lie: 58.00º Std. Length: 42.00" 145cc Std. Swt. D1
8
The thin, 17-4 stainless steel face is heat treated using a special process to maximize face deflection and increase ball speed for added distance with a higher peak trajectory and a steeper landing angle.
HIGH LAUNCHING, SOFT LANDING. Faster ball speeds and longer distance with a higher max shot height provide softer-landing shots into the greens that allow golfers to attack pins from longer distances. A special heattreatment process results in a thinner and stronger face to increase ball velocity. Internal weighting creates a high MOI. Progressive CG locations and offsets provide efficient gapping and trajectories that maximize distance.
PROGRESSIVE CG LOCATIONS In the lower-lofted hybrids, the CG is farther back to promote high launch. A lower, more forward CG through the mid- and higher-lofted models reduces spin. Progressive CG locations and offsets ensure efficient gapping and trajectories that maximize distance.
9
WEIGHTED FOR ACCURACY Substantial heel-toe weighting elevates MOI for extreme forgiveness. Weight in the low sole creates a low-back CG for consistent impact and high launch.
CONFIDENCE INSPIRING To inspire confidence, the top rail is flatter and the heel section is higher, providing a very square face at address that helps with aim and alignment consistency.
TFC 419H TOUR 90
TFC 419H
The high-balance-point TFC 419H shaft has a CG that's closer to the grip end, creating a simultaneous increase in energy, momentum and inertia for faster ball speeds and greater distance.
TOUR 90 PING’s premium after-market shaft is for the player who wants a stiffer, slightly heavier shaft that launches lower and spins less.
Loft: 17º
Loft: 19º
Std. Lie: 58.00º Std. Length: 40.75" Std. Swt. D1
Loft: 22º
Std. Lie: 58.50º Std. Length: 40.25" Std. Swt. D1
Std. Lie: 59.00º Std. Length: 39.75" Std. Swt. D1
SHAFT SPECIFICATIONS
SOFT R
REGULAR
STIFF
X-STIFF
3.2º 64g
3.1º 68g
2.9º 72g
2.8º 77g
2.8º 73g
2.3º 82g
2.2º 87g
TFC 419H Torque Weight
TOUR 90 Torque Weight
HYBRIDS
HYBRIDS
HEAT-TREATED FACE
Loft: 26º
Std. Lie: 59.50º Std. Length: 39.25" Std. Swt. D1
Loft: 30º
Std. Lie: 60.00º Std. Length: 38.75" Std. Swt. D1
10
47°SS
Std. Lie: 64.00º Std. Length: 35.50" Bounce Width: .669" Offset: .05" Std. Swt. D2
OUR BEST WEDGE “HANDS DOWN”. Glide wedges are engineered to ensure short-game performance and trajectory control on shots of every length. The Dyla-wedge grip (longer for gripping down for more trajectory control), CFS Wedge shaft (weight, flex and balance optimized) and head design (chrome-plated 431 stainless steel, 3 sole options, added bounce, loft-optimized Gorge grooves) combine to deliver our most versatile and consistent wedge line ever.
50°SS
52°SS
54°SS
56°SS
58°SS
60°SS
56° WS
58° WS
Std. Lie: 64.00º Std. Length: 35.50" Bounce Width: .667" Offset: .04" Std. Swt. D2
Std. Lie: 64.00º Std. Length: 35.50" Bounce Width: .667" Offset: .04" Std. Swt. D2
Std. Lie: 64.25º Std. Length: 35.25" Bounce Width: .659" Offset: .04" Std. Swt. D3
WEDGES
WEDGES
STANDARD SOLE (SS)
MOISTURE-REPELLING FINISH Chrome-plated 431 SS head repels moisture to create more friction for improved spin and consistency in wet conditions and lies in the rough.
Std. Lie: 64.25º Std. Length: 35.25" Bounce Width: .659" Offset: .04" Std. Swt. D3
Std. Lie: 64.50º Std. Length: 35.00" Bounce Width: .678" Offset: .03" Std. Swt. D4
Std. Lie: 64.50º Std. Length: 35.00" Bounce Width: .678" Offset: .03" Std. Swt. D4
WIDE SOLE (WS)
FITTING BY SOLE Thin Sole (TS) • Shallow attack angle & divots • Firm bunkers & turf • Max versatility
Standard Sole (SS) • Moderate attack angle and divots • Varying bunkers & turf
Wide Sole ( WS) • Steep angle of attack & deep divots • Soft bunkers & turf • Max forgiveness
Three sole configurations – standard sole (SS), wide sole (WS), and thin sole (TS) – ensure the wedges glide through the turf and allow golfers to be fit according to their attack angle and most common turf conditions.
LOFT-OPTIMIZED GORGE GROOVES
DYLA-WEDGE GRIP
The radius and sidewall angles vary by loft in the precisionmilled Gorge grooves to ensure higher spin for consistent, predictable results.
A ¾-inch-longer grip encourages gripping down for trajectory control and added versatility on finesse shots. Grip-down markings at 1 ⅜ -inch intervals guide hand placement. A softer tapering profile improves feel.
FULL SHOTS A 16° sidewall is optimized for more groove volume in lofts 47 through 54 to maximize spin consistency on full shots. Lofts 47° - 54°
CFS WEDGE SHAFT AROUND THE GREEN
Lofts 56° - 60°
In the 56° through 60° lofts, a 24° sidewall and a tighter radius help compress and “grab” the ball to maximize spin on short approaches and chip shots for added precision.
Optimized in weight, flex and balance, this 118g proprietary shaft promotes lower launch with enhanced control, feel and stability.
54° WS
Std. Lie: 64.25º Std. Length: 35.25" Bounce Width: .742" Offset: .04" Std. Swt. D3
Std. Lie: 64.25º Std. Length: 35.25" Bounce Width: .744" Offset: .04" Std. Swt. D3
60° WS
Std. Lie: 64.50º Std. Length: 35.00" Bounce Width: .743" Offset: .04" Std. Swt. D4
Std. Lie: 64.50º Std. Length: 35.00" Bounce Width: .754" Offset: .04" Std. Swt. D4
THIN SOLE (TS)
58° TS
Std. Lie: 64.50º Std. Length: 35.00" Bounce Width: .459" Offset: .03" Std. Swt. D4
60° TS
Std. Lie: 64.50º Std. Length: 35.00" Bounce Width: .465" Offset: .03" Std. Swt. D4
EYE2 GORGE
LOB WEDGE
Loft: 60° Std. Length: 35.00" Bounce Width: .710" Offset: .03"
RELIABLE CLASSICS Gorge grooves give the timeless Eye2 sand and lob wedges exceptional spin and stopping power. The grooves’ width, spacing, radius, and wall angles are precision milled at PING. For approaches or deep-bunker escapes, the perimeter weighting and sole contours optimize forgiveness and control.
SAND WEDGE
Loft: 56° Std. Length: 35.25" Bounce Width: .744" Offset: .14"
11
Anser W
Traditional: 350g
Slight Arc Balance: Mid-Hang RH/LH
PUTTERS
TRADITIONAL
12
Traditional: 340g
Slight Arc Balance: Mid-Hang RH/LH ± 4º from std. lie angle
Heavy: 375g
Heavy: 365g
MODELS OF CONSISTENCY. Engineered to fit a golfer’s stroke tempo and feel preference, Cadence TR models advance putter fitting by using different-weight face inserts. Traditional-weight models feature an aluminum insert (blue in color) and typically fit mid-to-faster tempos and can improve lag putting. Heavy-version inserts (black) are made of stainless steel, which adds approximately 25g to better fit slower tempos and improve results on shorter putts. Both inserts feature the next generation of True Roll (TR) Technology grooves that vary in depth and width to significantly improve ball-speed consistency for accuracy on putts of every length.
NEXT-GENERATION TR GROOVES PROVIDE FORGIVENESS TR grooves vary in width and depth from the center of the face, producing normalized ball speeds across the face for unmatched consistency.
NEW DESIGN Sightline extends to the face.
HEAVY B65
Traditional: 340g
Straight Balance: Face RH/LH ± 4º from std. lie angle
Tomcat C
Traditional: 355g
Straight Balance: Face RH/LH
± 2º from std. lie angle
13 Heavy: 380g
Heavy: 365g
NEW DESIGN
NEW DESIGN
FIT FOR TEMPO Aluminum (Traditional) and 17-4 stainless steel (Heavy) inserts are used to vary the head weights and match a golfer’s stroke tempo.
Shea H
NEW DESIGN
Traditional: 345g
Strong Arc Balance: Toe Down RH/LH
Traditional: 350g
± 4º from std. lie angle
Heavy: 378g
Traditional Insert
Heavy: 383g
Rustler
Straight, Slight Arc, Strong Arc RH/LH ± 2º from std. lie angle
Heavy Insert
SOLE-PLATE WEIGHTS DISTINGUISH KETSCH
COUNTER-BALANCED
Weight differentiation in the high-MOI Ketsch model is achieved with different 17-4 stainless steel sole plates that vary in thickness. The putter head and TR grooves are precision milled at PING. A contrasting sightline ensures easy alignment.
Anser 2 CB*
Slight Arc Counter-balanced 400g RH/LH ± 4º from std. lie angle
Ketsch
Straight, Slight Arc, Strong Arc RH/LH
PUTTERS
± 4º from std. lie angle
Anser 2
TRADITIONAL
HEAVY Heavy: 388g
±2º from std. lie angle
Traditional: 355g
*Only available with Traditional insert.
The Anser 2 CB has a 50-gram weight inside the grip end of the shaft. The 17-inch grip has reference lines for the player to position his or her hands to optimize the benefits of counter-balancing.
CADENCE MIDSIZE GRIPS Traditional-weight putters are identified by a blue grip. Heavy putters have a black grip. Both grips weigh the same.
PERIMETER-WEIGHTED IRONS Tour-inspired heads offer extreme forgiveness and accuracy. The CG, bounce, length and lie angle are engineered for players 60" to 64". Lightweight graphite shafts help generate clubhead speed and ball velocity for greater distance.
Thrive is designed as a transition set between PING’s Moxie junior sets and our adult-sized equipment. The 10-club set is custom-engineered for ages 13 to 14 and a height range of 60" to 64". Shaft lengths, swingweights and total weights are suited to optimize results for the targeted ages.
LIGHTWEIGHT BAG
14
EARLY TEENS
EARLY TEENS
HELPING YOUNGER PLAYERS EXCEL.
15
A shorter version of the sleek L8 design has a four-way top, three pockets, sliding shoulder pads and a 24-inch leg span for stability.
ANSER PUTTER 460cc TITANIUM DRIVER
THRIVE SPECIFICATIONS
A low-back CG creates a high MOI. With 13º loft at 43.50", it’s easy to launch long drives that find the fairway.
CLUB LENGTH LOFT
18.5º FAIRWAY WOOD
FW 40.75" 18.50º Hybrid 37.75"
27.00º
6
36.38" 32.00º
7
35.75" 35.00º
8
35.25" 39.00º
9
34.75" 43.00º
PW 34.50" 48.00º SW 34.25" 55.00º Putter 33.00" 3.0º
JUNIOR SETS
The deep CG and an appropriate lie angle create higher, straighter results.
Driver 43.50" 13.00º
The winningest putter in history offers heel-toe weighting for forgiveness and a sightline to help with aiming.
HYBRID 5-IRON REPLACEMENT This 27º long-iron substitute promotes high trajectories.
SHELF APPEAL With bold, eye-catching graphics, Thrive’s sturdy, convenient packaging will draw attention.
MOXIE K
MOXIE G
MOXIE I
Ages 6-7 Heights 42"- 47"
Ages 8-9 Heights 48"- 53"
Ages 10-11 Heights 54"-60"
(Best fit for 44"- 46")
(Best fit for 50"-52")
(Best fit for 56"-58")
4-CLUB SET INCLUDES
6-CLUB SET INCLUDES
7-CLUB SET INCLUDES
» Stainless-steel fairway wood (Length: 30") » 7-iron (27"), SW (25") » Anser putter (24") » Lightweight carry bag
» Titanium driver (Length: 35") » Stainless-steel fairway wood (33") » 7-iron (30"), 9-iron (29"), SW (28") » Anser putter (27") » Lightweight carry bag
» Titanium driver (Length: 39") » Stainless-steel fairway wood (37") » Stainless-steel hybrid (35") » 7-iron (33"), 9-iron (32"), SW (31") » Anser putter (30") » Lightweight carry bag
CUSTOMIZATION
CUSTOMIZATION
Below are a few examples of custom after-market shafts that are available from PING’s inventory. Standard lead times for metal woods and irons apply.
LAMKIN WRAP-TECH
CUSTOM AFTER-MARKET SHAFTS
GOLF PRIDE MULTI-COMPOUND BLUE/BLACK
CUSTOM GRIPS
GOLF PRIDE CP 2 PRO
PING’s custom-options program allows golfers to choose from many combinations of shafts and grips from the world’s leading manufacturers to identify those that fit their game to produce the best results and lower scores. Products are among the most popular in the industry and are relied on by the game’s best players on professional tours worldwide.
WINN DRI-TAC WRAP
AFTER-MARKET SHAFTS & GRIPS
FUJIKURA SPEEDER EVOLUTION 661
16
17
MITSUBISHI DIAMANA S+ BLUE
AVS GREY/WHITE PALM LOCK
ALDILA ROGUE SILVER
WINN JUMBO LITE PISTOL
UST MAMIYA ELEMENTS CHROME
SUPER STROKE RED/WHITE FLATSO 1.4
CUSTOM PUTTER GRIPS
SUPER STROKE BLACK/WHITE 3.0
PROJECT X LZ
CUSTOM GRIND OPTIONS CUSTOM EXOTIC AFTER-MARKET SHAFTS These are examples of shafts that must be special-ordered from the manufacturer. Lead times will vary, and may range from 2 to 4 weeks.
Control and consistency are paramount to effective iron and wedge play. It’s important that the club gets through the turf and contacts the ball solidly for achieving the proper spin, trajectory and control. To fit individual swing types and different turf conditions, the PING Wrx department offers a number of creative grind options to help players execute all varieties of shots with confidence and predictable results.
UST MAMIYA ATTAS 5 GOGO
EIGHT GRIND OPTIONS GRAPHITE DESIGN YS NANO RELOADED
GRAPHITE DESIGN TOUR AD MJ
Bounce Grind Back Grind Heel Grind Lead-Edge Grind Half-Moon Grind Back-Heel Combo Grind Lob Combo Grind Wrx Combo Grind
TRUE TEMPER DYNAMIC GOLD X100 TOUR ISSUE BLACK ONYX
FOR MORE DETAILS AND AVAILABILITY OF THESE SHAFTS, GRIPS OR GRINDS, VISIT P I N G . C O M