NEWS & PROMOTIONS OCTOBER 2019
www.
.com.au
GUARANTEED TOUGH. ®
BUY MORE GET MORE FREE VIA REDEMPTION 5AH XR BATTERY DCB184-XE
WHEN YOU SPEND
$1399 OR MORE XR RADIO CHARGER DCR027-XE
WHEN YOU SPEND
$1999 OR MORE XR RADIO CHARGER + 5AH XR BATTERY DCR027-XE + DCB184-XE
+ WHEN YOU SPEND
$2499 OR MORE 216MM (8 1/2") SLIDE MITRE SAW (XPS) DCS777T2-XE
WHEN YOU SPEND
$2999 OR MORE VISIT
GUARANTEEDTOUGH.COM.AU TO REDEEM TODAY
Terms & Conditions Offer valid for products purchased from 01/10/2019 to 31/01/2020, and can be redeemed online until 14/02/2020. Redemption item only available in same transaction. Limited to 1 Spend Level redemption per Transaction. Based on purchases of either DE WALT Cordless or DE WALT Corded Power Tools, Power Tool Accessories & Storage purchases. Excludes Pressure Washer and Generator purchases. Not available in conjunction with any other offer. Visit www.GUARANTEEDTOUGH.com.au for full Terms & Conditions
FREE
VIA REDEMPTION
XR FLEXVOLT BATTERY & CHARGER STARTER KIT DCB118T1-XE
WHEN YOU
PURCHASE
ANY 2 SELECTED BARE UNITS FROM THE LANDSCAPING RANGE
(ELIGIBLE PRODUCTS BELOW) 18V XR BRUSHLESS SPLIT SHAFT LINE TRIMMER DCM561PBS-XE
18V XR HEDGE TRIMMER DCM563PB-XE
18V XR BRUSHLESS CHAINSAW DCM565N-XE
18V XR BRUSHLESS BLOWER DCM562PB-XE
54V XR FLEXVOLT BRUSHLESS SPLIT SHAFT LINE TRIMMER DCM5713N-XE
54V XR FLEXVOLT BRUSHLESS CHAINSAW DCM575N-XE
54V XR FLEXVOLT AXIAL BLOWER DCMBA572N-XE
VISIT
GUARANTEEDTOUGH.COM.AU TO REDEEM TODAY
OUTDOOR POWER EQUIPMENT
(BARE) DCM572N-XE
(BARE) DCM575N-XE
299
$
RRP
54V XR FLEXVOLT BRUSHLESS BLOWER (BARE UNIT) • • • • • • •
Power Output: 720W Runtime: 15min (DCB547) Air Speed: 207km/h Air Volume: 423CFM Control: Variable speed trigger Noise Power: 99.5dB(A) Vibration: 1.9m/s2
(KIT) DCM575X1-XE
509
$
RRP
699
$
RRP
54V XR FLEXVOLT BRUSHLESS CHAINSAW • • • • • • •
Power Output: 1500W Runtime: 130cuts at 100x100mm (DCB547) Chain Speed: 15m/s Cut Capacity: 40cm, 3/8” Maintenance: Tool-free with auto oiling Noise Power: 100.5dB(A) Vibration: 3.5m/s2
FREE VIA REDEMPTION
(BARE) DCMW564N-XE
549
$
RRP
2 X 18V XR BRUSHLESS MOWER • • • • • • •
Power Output: 1400W Runtime: 800m2 (2x DCB184) Collection Bag: 55L Cut Capacity: 48cm with 51cm Metal deck 5 Cutting Heights: 25-86mm Noise Power: 92dB(A) Vibration: 2.5m/s2
54V XR FLEXVOLT BRUSHLESS CHAINSAW KIT
OR
DCD796N-XE OR DCB547-XE
FREE VIA REDEMPTION 18V HAMMER DRILL DRIVER KIT OR 2 X 5AH BATTERIES
OR
DCM575X1-XE
WHEN YOU PURCHASE 2 X 18V XR BRUSHLESS LAWN MOWER KIT
DCD778S2T-XE OR 2 X DCB184-XE
249
$
RRP
DCMW564T2-XE
(BARE) DCM565N-XE
(BARE) DCM562PB-XE
329
$
RRP
249
$
RRP
18V XR HEDGE TRIMMER (BARE UNIT)
18V XR BRUSHLESS CHAINSAW (BARE UNIT)
18V XR BLOWER (BARE UNIT)
• Up to 70 mins runtime (DCB184) • 55cm Dual action, hooked-tooth laser cut blades • 1400spm Cutting strokes/min • 19mm Cutting gap • Safety lock • Wrap around aux handle
• • • • • • •
• • • • • •
DCM563PB-XE
2
799
$
RRP
WHEN YOU PURCHASE
18V XR HAMMER DRILL SKIN OR 9AH BATTERY
(BARE) DCM563PB-XE
(KIT) DCMW564T2-XE
DCM565N-XE
Power Output: 600W Runtime: 70cuts at 100x100mm (DCB184) Chain Speed: 8m/s Cut Capacity: 30cm, 3/8” Maintenance: Tool-free with auto oiling Noise Power: 96.5dB(A) Vibration: 3.5m/s2
DCM562PB-XE
Up to 20 mins runtime (DCB184) 400CFM air volume & and 145km/h Variable speed trigger with speed lock High efficiency brushless motor Free standing base Lightweight & compact 2.6kg
NEW
TOUGHNESS
WITHOUT
LIMITS
(BARE) (KIT) DCMBA572N-XE DCMBA572X1-XE
329
$
RRP
529
$
RRP
54V XR FLEXVOLT BRUSHLESS AXIAL BLOWER
The NEW 54V XR FLEXVOLT Axial Blower provides petrol performance with the FREEDOM OF CORDLESS. Providing both high speed and huge air volume per minute the unit is ideal for expansive jobsite debris removal. With its ergonomic design and weight balance it is also Ideal for prolonged use. • • • • •
Air Speed: 200km/h Air Volume: 650CFM Control: Variable speed trigger Ease of Use: Lock-On Trigger at desired speed Axial Design provides optimized balance
NEW
NEW
(BARE) DCM5713N-XE
429
$
RRP
54V XR FLEXVOLT BRUSHLESS SPLIT SHAFT LINE TRIMMER (BARE UNIT) • • • • • • •
Power Output: 530W Runtime: 46min (DCB547) Cut Speed: 0-5600/6600RPM Cut Capacity: 38cm Swathe, 2.0mm line Control: Variable speed trigger Noise Power: 94dB(A) Vibration: 10.1m/s2
(BARE) DCM561PBS-XE
269
$
RRP
18V XR BRUSHLESS SPLIT SHAFT LINE TRIMMER (BARE UNIT) • Up to 54 mins runtime (DCB184) • 33cm swathe with 2.0mm line • Variable 2 speed control 0-4600/0-6000rpm • High efficiency brushless motor • Automatic bump feed • Wrap around aux handle
NEW
(BARE) DCMPS567N-XE
349
$
RRP
18V XR BRUSHLESS POLE SAW (BARE UNIT) • • • •
Powerful 18V Brushless Motor 20cm Low Kick Back Bar and Chain Metal Bucking Strops and Tree Hook 1.5m reach extendable to 4.5m
3
NEW
WORLD'S FIRST 54V CORDLESS WALL CHASER DCG200NT-XJ
799
$
RRP
54V XR FLEXVOLT BRUSHLESS WALL CHASER (BARE UNIT) DCG200NT-XJ • • • •
9000RPM, 32mm Max Depth of Cut 35mm Max Width of Cut Wireless Tool Control Module allows for Wireless activation of compatible extractors • AirLock Compatible • Electronic Brake Supplied with 2 x 125mm Diamond Discs and TSTAK Kitbox
18V XR HEAT GUN (BARE UNIT) DCE530-XJ
The DCE530 is our first dedicated cordless heat gun designed for many users and applications on site such as shrinking electrical tubing, bending PVC pipes, drying materials, loosening nuts and bolts and many more. Compatible with all 18V XR batteries the DCE530 features a compact size, 2 temperature settings with a maximum of 530°C to allow for maximum versatility in applications and a lock on switch to improve comfort in longer jobs. • • • •
4
Dual Action Trigger Lock On Button LED light Supplied with 2 Application Nozzles; surface and reflector
DCE530-XJ
199
$
RRP
DCE530-XJ Temparature Settings
Automatic
Operating Temperature
290/530°C
Airflow
109/190 L/Min
Weight
0.5 kg
NEW
4 PORT FAST
CHARGER 100
TIME
90 80
50 40 30
60
60
50
45
40
30
22
10
75
20
100
MINUTES MINUTES
CHARGETIME TIME CHARGE
70 60
DCB548
DCB547
DCB546
DCB189
DCB184
DCB187
DCB182
DCB183
DCB181
0
12 AH 9 AH 6 AH 4 AH 5AH
3AH
4 AH 2 AH
1.5 AH
BATTERY
BATTERY
XR 4 PORT FAST CHARGER DCB104-XE
Get charged quickly with the new 10.8 - 18V 4 port fast charger. With the ability to simultaneously charge four batteries at the same time with 8amp output you will be able to charge 4 x 6.0AH XR FLEXVOLT batteries in one hour. ToughSystem™ Compatible - Featuring side mounts, the charger can be mounted to the top of a ToughSystem™ Storage box for easy jobsite pack up.
LONG
RUNTIME
DCB546-XE
DCB547-XE
RRP
RRP
169
$
229
$
DCB548-XJ
289
$
RRP
DCB104-XE
399
$
RRP
SHORT CHARGE TIME
WHY DEWALT XR FLEXVOLT? XR FLEXVOLT™ is a range of 54V power tools that offer runtime and performance that has never been seen before. For the first time, trade professionals can reliably undertake heavy-duty construction applications using 54V power without the inconvenience of a cable.
WHAT ARE XR FLEXVOLT BATTERIES? DEWALT XR FLEXVOLT™ is the only battery on the market that can switch from 54V to 18V, making it backward-compatible with your existing XR powertools. Offered currently in either 6Ah, 9Ah or 12Ah capacity.
5
18V / 54V XR BRUSHLESS KITS 1599
$
RRP
18V / 54V 5 PIECE KIT 6AH
DCZ596T2T-XE
• DCD996 XRP 3 Speed Hammer Drill Driver • DCF887 3 Speed Impact Driver • XR FAST Charger • 2 x DEEP TSTAK VI 54V XR FLEXVOLT • DCS575 54V XR 184mm Circ Saw • DCG414 54V XR 125mm Angle Grinder • DCS388 54V XR Reciprocating Saw • 2 x 6.0Ah 18V/54V XR FLEXVOLT Batteries
FREE VIA REDEMPTION
WHEN YOU PURCHASE
18V XR BRUSHLESS ROTARY HAMMER
18V / 54V 5 PIECE KIT 6AH
DCH133N-XJ
DCZ596T2T-XE
1499
$
RRP
18V / 54V 3 PIECE KIT 9AH DCZ333X2T-XE
• DCD996 XRP 3 Speed Hammer Drill Driver • DCF887 3 Speed Impact Driver • DEEP TSTAK VI & TSTAK II • XR FAST Charger 54V XR FLEXVOLT • DCH333 54V XR 3kg SDS-PLUS Rotary Hammer • 2 x 9.0Ah 18V/54V XR FLEXVOLT Batteries
699
$
RRP
FREE VIA REDEMPTION
18V XR BRUSHLESS 125MM PADDLE SWITCH GRINDER DCG406N-XJ
6
18V XRP 2 PIECE KIT 6AH DCK296T2T-XE
• DCD996 XRP 3 Speed Hammer Drill Driver • DCF887 3 Speed Impact Driver • XR FAST Charger • DEEP TSTAK VI 54V XR FLEXVOLT • 2 x 6.0Ah 18V/54V XR FLEXVOLT Batteries
WHEN YOU PURCHASE
A SELECTED 54V XR BRUSHLESS KIT DCK296T2T-XE, DCZ333X2T-XE
18V XR BRUSHLESS KITS 749
$
RRP
FREE VIA REDEMPTION
649
$
18V XR BRUSHLESS 125MM PADDLE SWITCH GRINDER
RRP
DCG406N-XJ
18V XR BL 2PC KIT 5AH
18V XRP BL 2PC KIT 5AH
• DCD996 3 Speed Hammer Drill/Driver • DCF894 1/2” Compact Mid Torque Wrench Kit Includes: • 2 x 5Ah 18V XR Batteries • Multi Voltage Charger • 1/2” Square to 1/4” Hex Adaptor
• DCD996 XRP 3 Speed Hammer Drill Driver • DCF887 3 Speed Impact Driver Kit Includes: • 2 x 5Ah 18V XR Batteries • XR FAST Charger • DEEP TSTAK II
DCK2094P2-XE
569
$
RRP
DCK296P2T-XE
WHEN YOU PURCHASE
A SELECTED 54V XR BRUSHLESS KIT DCK296P2T-XE, DCK2094P2-XE
FREE VIA REDEMPTION
459
$
18V XR JOBSITE BLOWER
RRP
DCV100-XE
18V XRP BL KIT 5AH
18V XR BL KIT 5AH
• DCD996 XRP 3 Speed Hammer Drill Driver • No Load Speed: 0-450/1,500/2,000RPM • 820 UWO Kit Includes: • 2 x 5Ah 18V XR Batteries • DCB115-XE Multi-Voltage Charger • TSTAK Kit Box
• DCD796 XR 2 Speed Hammer Drill Driver • No Load Speed: 0-600/2,000RPM • 15 Position Adjustable Torque Kit Includes: • 2 x 5Ah 18V XR Batteries • DCB115-XE Multi-Voltage Charger • TSTAK Kit Box
DCD996P2-XE
BUY MORE
GET MORE VISIT
GUARANTEEDTOUGH.COM.AU TO REDEEM TODAY
DCD796P2-XE
WHEN YOU PURCHASE
A SELECTED 18V XR BRUSHLESS KIT DCD796P2-XE, DCD996P2-XE
FREE
VIA REDEMPTION
5AH XR BATTERY
XR RADIO CHARGER
DCB184-XE
DCR027-XE
WHEN YOU SPEND
WHEN YOU SPEND
$1399 OR MORE XR RADIO CHARGER + 5AH XR BATTERY DCR027-XE + DCB184-XE
$1999 OR MORE 216MM (8 1/2") CROSS CUT MITRE SAW (XPS) DCS777T2-XE
+ WHEN YOU SPEND
$2499 OR MORE
WHEN YOU SPEND
$2999 OR MORE 7
54 XR FLEXVOLT COMPRESSOR
(BARE) DCC1054N-XJ
399
$
RRP
The DCC1054 XR FLEXVOLT Compressor makes pneumatic nailing completely cordless. Part of the 54V XR FLEXVOLT range, the 10 litre compressor is battery powered and lightweight allowing you to cut the cord and take pneumatic nailing anywhere on the jobsite. Featuring our new OneTurn regulator, the DCC1054 allows you to adjust the compressor’s regulated pressure quickly and easily. The DCC1054 Compressor is ideally suited to 2nd fix brad nailing applications, air powered paint gun tasks or even vehicle tyre inflation.
(KIT) DCC1054T2-XE
749
$
RRP
349
$
RRP
54V XR FLEXVOLT 184MM CIRCULAR SAW DCS575N-XE
54V XR FLEXVOLT SDS+ 3KG ROTARY HAMMER DCH333NT-XJ
349
$
RRP
54V XR FLEXVOLT 125MM ANGLE GRINDER DCG414N-XJ
DCH481N-XJ
399
54V XR FLEXVOLT REAR HANDLED CIRCULAR SAW DCS577N-XJ
DCS388N-XJ
849
$
RRP
54V XR FLEXVOLT 165MM PLUNGE SAW DCS520NT-XJ
749
$
RRP
479
$
RRP
54V XR FLEXVOLT 230MM CONCRETE CUT OFF SAW
54V XR FLEXVOLT STUD & JOIST DRILL
*Blade sold seperately - DT40260-QZ (Diamond Wheel) *Blade sold seperately – DWAFV8918 (Abrasive Wheel)
*Drill bits sold seperately - see page 10 for DEWALT Self Feed Bit Range
DCS690N-XJ
All products featured on this page are bare units, batteries and chargers sold separately.
8
54V XR FLEXVOLT RECIPROCATING SAW
799
54V XR FLEXVOLT SDSMAX 5KG ROTARY HAMMER
349
$
RRP
$
RRP
$
RRP
649
$
RRP
DCD460N-XJ
140+ PRODUCTS OUR FASTEST GROWING SYSTEM 319
18V XR BRUSHLESS XRP 3 SPEED HAMMER DRILL DCD996N-XE
199
$
$
RRP
RRP
18V XR AC/DC INFLATOR DCC018N-XJ
18V XR BRUSHLESS HEAVY DUTY 3 MODE SDS+ ROTARY HAMMER DCH274N-XE
349
$
RRP
DCF894N-XJ
DCF899N-XE
18V XR BRUSHLESS HIGH TORQUE IMPACT WRENCH
DCF899N-XE (DETENT PIN) DCF899HN-XE (HOG RING)
309
$
RRP
18V XR BRUSHLESS 125MM GRINDER DCG405N-XJ (SLIDE SWITCH) DCG406N-XJ (PADDLE SWITCH) DCG405FN-XJ (FLAT HEAD - SLIDE)
DCS356N-XJ
309
18V XR BRUSHLESS 184MM CIRCULAR SAW
DCV584L-XE
299
18V XR BRUSHLESS OSCILLATING MULTI-TOOL
$
RRP
XR AC/DC WET & DRY VAC 7.5L (L-CLASS)
$
RRP
18V XR BRUSHLESS RECIPROCATING SAW DCS367N-XJ
599
$
RRP
18V XR LI-ION BRUSHLESS 15GA DA BRADDER DCN650N-XJ
309
349
$
$
RRP
379
$
RRP
DETENT PIN
HOG RING
18V XR BRUSHLESS 1/2” MID TORQUE WRENCH
429
$
RRP
DCF899HN-XE
DCS570N-XE
539
$
RRP
RRP
18V XR BRUSHLESS PLANER DCP580N-XE
All products featured on this page are bare units, batteries and chargers sold separately.
9
ULTIMATE SAFETY. ADVANCED DUST
MANAGEMENT
SOLUTIONS When the Perform & Protect shield is awarded for control, it is guaranteed that additional innovative torque control safety features have been incorporated into the design of the tool.
50%
UP TO
LESS VIBRATION
When the Perform & Protect shield is awarded for vibration, it is guaranteed that Tri-Axial vibration levels have been reduced, increasing usage time without reducing performance.
COMPLETE
TORQUE
CONTROL When the Perform & Protect shield is awarded for dust, it is guaranteed the potential of inhaling dust is dramatically reduced to give a cleaner, safer working environment while also increasing the durability of the tool.
10
MAXIMUM
PRODUCTIVITY.
M CLASS
CORDLESS DUST EXTRACTION IS HERE!
54V XR FLEXVOLT M-CLASS DUST EXTRACTOR DCV586M
Powered by 54V XR FLEXVOLT technology the DCV586M is the ultimate dust extraction solution for a new generation of cordless tools and the key to unlocking the cordless jobsite. The DEWALT BRUSHLESS motor and high capacity XR FLEXVOLT battery coupled with dual M-Class certified filters with automatic cleaning delivers powerful, constant performance and runtime for the
(KIT) DCV586MT2-XE
899
$
RRP
(BARE) DCV586MN-XJ*
549
$
RRP
most demanding applications. Other features include a remote for wireless operation, a recessed battery housing to protect from jobsite conditions and TSTAK compatibility.
DCV586M Filter clean
Automatic
Wet / dry Tool actuation
Yes Wireless keyfob
Capacity
11 L
Hose length
2.5 m *Bare unit DCV586MN-XJ
DWV902M-XE
1400W 38L M-CLASS DUST EXTRACTOR DWV902M-XE
859
$
RRP
DUST MANAGEMENT
Advanced Dust Extraction Solutions.
DCV902M
The Perform & Protect dust certification logo guarantees that the risks of dust inhalation are considerably reduced, to work in a cleaner and more secure environment.
Power Input
1400W
Max Airflow
31.1l/sec
Capacity Power Take Off Rating Wet/Dry
BONUS*
FREE VIA REDEMPTION
DWV9350-XJ
DCV584L-XE
FLOOR CLEANING KIT
38L 1000W Yes
18V XR L-CLASS WET/DRY VAC
11
PURCHASE
A SELECTED ROTARY HAMMER BARE UNIT
DCH333NT-XJ
649
$
RRP
DCH274N-XE
DCH254N-XE
RRP
RRP
539
$
429
$
FREE VIA REDEMPTION
900W 125MM ANGLE GRINDER DWE4151-XE
919
$
RRP
18V XR HIGH POWERED SDS+ ROTARY HAMMER 5.0AH DCH283P2-XE
FREE VIA REDEMPTION 18V XR BRUSHLESS 125MM PADDLE SWITCH GRINDER DCG406N-XJ
• No Load Speed 0 - 980rpm • Max. Drilling Capacity Concrete 26mm • Hand/Arm Vibration - drilling into Concrete 8.5m/s2 • Blows Per Minute 0 - 4480bpm • Impact Energy 2.8J Kit Includes: • 2 x 5AH 18V XR Batteries • DCB115-XE MULTI-VOLTAGE CHARGER
1129
$
RRP
54V XR FLEXVOLT SDS+ 3-MODE HAMMER DRILL KIT 9.0AH
FREE VIA REDEMPTION 18V XR BRUSHLESS 125MM PADDLE SWITCH GRINDER DCG406N-XJ
DCH333X2-XE
• No Load Speed 0 - 1000rpm • Max. Drilling Capacity Concrete 30mm • Hand/Arm Vibration - drilling into Concrete 7.5m/s2 • Blows Per Minute 0 - 4480bpm • Impact Energy 3.5J Kit Includes: • 2 X 9AH 18V/54V XR FLEXVOLT Batteries • XR FAST CHARGER • T-STAK KIT BOX
SDS-PLUS® 4 CUTTER
12
• 4 flute helix maximises debris removal for fast drilling and clear holes
• Optimised heat treatment for maximum strength
• Solid piece carbide with 4 cutting faces to prevent jamming in rebar
• The drill tip and body are connected using the resistance welding method
• The carbide tip and body brazed together via an innovative welding technique
• Available in ø sizes from 5mm to 14mm
METAL WORKING SOLUTIONS
279
$
RRP
969
279
$
$
RRP
RRP
230MM CORDED ANGLE GRINDER 2400W
2200W 355MM (14") MULTI-CUTTER
180MM CORDED ANGLE GRINDER 2400W
AAngle Grinder 230mm (9") 2400W Trigger Switch, 6,500 PRM, Dust Ejection System, Anti vibration Rear & Side handles, Cut off Brushes, Keyless Guard
• Large tool-free pivoting fence • 70 tooth tungsten carbide tipped blade • 25.4mm arbor fitment
Angle Grinder 180mm (7") 2400W Trigger Switch, 8,500 PRM, Dust Ejection System, Anti vibration Rear & Side handles, Cut off Brushes, Keyless Guard
DWE4559-XE
DW872-XE
DWE4557-XE
FREE VIA REDEMPTION
FREE VIA REDEMPTION
900W 125MM ANGLE GRINDER
A SELECTED LARGE ANGLE GRINDER OR MULT-CUTTER
DWE4151-XE
DWE4559-XE, DWE4557-XE, DW872-XE
449
$
RRP
180MM VARIABLE SPEED POLISHER
FREE VIA REDEMPTION 18V XR HAMMER DRILL KIT DCD778S2T-XE
DWP849X-XE
• Variable speed trigger • Rubber overmould back handle • Large spindle lock button allows easy changing of the backing pad Power Input No Load Speed Max. Disc Diameter Spindle Thread
1250W 0-600/3500rpm 150 & 180 & 230mm M14 13
NEW
18V XR BRUSHLESS UNIVERSAL DUST EXTRACTOR
(BARE) DWH161N-XJ
299
$
RRP
(KIT) DWH161D1-XE
399
$
RRP
The DWH161 Brushless Universal Dust Extractor is a lightweight, wearable, high mobility dust extraction solution. It's optimized for a wide range of tools and applications including SDS Plus Rotary Hammers for drilling and chipping, percussion hammer drills, drywall cutout tools, sanders, routers, and jig saws. • Independent unit powered by DEWALT Battery • Wireless Tool Control • HEPA Certified Filter • 1m Flexible Hose, Belt Hook, Carry/ Shoulder Strap, Universal Fitment Rotary hammer not included
(BARE) DCH263N-XJ
349
$
RRP
18V XR BRUSHLESS IN-LINE 3 MODE SDS+ ROTARY HAMMER 3.0J of impact energy allowing concrete drilling up to 28mm PERFORM & PROTECT - Anti-Vibration Control rear handle reduces hand/arm vibration to 9.1m/s2 3 Modes – Rotary only drilling, Hammer Drilling and Chiseling High-performance 3.0J inline cordless SDS-Plus Rotary Hammer Drill enabling fast drilling up to 28mm Ø into solid concrete – now the most powerful 18V SDS-Plus hammer in the DEWALT® range
14
(KIT) DCH263P1-XE
499
$
RRP
ADHESIVE RANGE PV45 POLYESTER • Cost effective solution • For Low-Medium loads • Use with standard caulking gun
BONUS
BOX OF 12X160MM ZINC STUDS WITH ANY ADHESIVE PURCHASE
AC100PRO VINYLESTER • Quick curing mortar for heavy loads • Ideal for horizontal or vertical applications • Approved for water filled holes
PURE150PRO EPOXY • High-strength twocomponent solution • Can be used in damp, wet or water filled holes • Approved for Seismic loading
BOTTOM PLATES TO PLASTERBOARD WE’VE GOT YOU COVERED 30.50
$
RRP
WALLDOG™ 100 PACK DFMWDP
50.50
$
RRP
42
$
RRP
CHIPBOARD SCREWS 8X32 ZINC, 1000 PACK
BLUETIP SCREW-BOLT™ 10X100 ZINC, 25 PACK
DFS008-PT
DFMBT10100
NEW
18V XR ELECTRICIAN’S STAPLER The DCN701 18V XR Stapler allows electrical contractors to secure cables on the jobsite faster and more consistently. The tool automatically adjusts depth of drive based on cable thickness and fits without pinching. A compact size of 200mm allows the user to work between joists and a built in LED light illuminates the working area when power isnt available.
DCN701D2-XE
529
$
RRP
DCN701N-XJ
379
$
RRP
DRS18100-XJ
49.95
$
RRP
DCN701N / D2 Magazine Capacity
35
Height
200mm
Weight
2.1kg
DRS18100 Staple Diameter Staple Size
19mm Crown 25mm
15 15
1299
$
RRP
PRODUCTIVITY
ACCURACY
CAPACITY
EASE OF USE
1675W 305MM (12”) DOUBLE BEVEL SLIDE COMPOUND MITRE SAW (XPS) XPS work light – excellent cutline visibility, no adjustment required
AIR LOCK - Fully compatible allowing direct connection with DEWALT dust management system
Outstanding cutting capacity of 303mm x 110mm – to meet all your application requirements
High quality slide rail assembly – for long life performance
DWS780-XE (MAINS POWERED 230V AC) Power Input
1675W
Blade Speed
3800RPM
Blade Diameter
305mm
Blade Bore
25.4mm
Mitre Capacity
60/50°
Bevel Capacity
49/49°
Max. Depth of Cut
170mm
Width x Height x Depth
770 x 396 x 470mm
Weight
25kg
Kit Includes • 60 Tooth Blade • Dust Bag
• Blade Spanner • Material clamp
X Y
X 90˚ 90˚ 303 mm
Precision machined base and rotary table for jobsite durability
Stainless mitre detent lock – delivers outstanding repeatable accuracy
X
Y
X
Y
410 mm
33 mm
44 mm
170 mm
330 mm
58 mm
345 mm
44 mm
25 mm
170 mm
90˚ 45˚ 211 mm
112 mm
244 mm
76 mm
45˚ 45˚ 315 mm
50 mm
45˚ 90˚
BONUS*
FREE VIA REDEMPTION
DWX723-XE
DCD778S2T-XE
LONG BEAM MITRE SAW STAND
*Bonus in store at participating retailers
16
Tall dual sliding fences – maximising work piece stability and accuracy
Y 110 mm
18V XR HAMMER DRILL KIT
GUARANTEED TOUGH
MACHINERY
254MM (10”) HEAVY DUTY TABLE SAW 2000W DWE7491-XE
1249
$
RRP
DWE7491-XE Rip Capacity
825mm
Max. D.O.C.
79mm @ 90°
Weight
26.6kg
Includes: • 24 tooth saw blade • Mitre attachment • 2 blade spanners & push stick
• Rack & Pinion Fence for Increased Accuracy & ease of use
Rolling table saw stand sold separately.
FREE VIA REDEMPTION 1350W 184MM CIRCULAR SAW
BONUS*
TABLE SAW SCISSOR STAND DWE74912-XJ
DWE560-XE
849
$
RRP
999
$
RRP
1850W LIGHTWEIGHT TABLE SAW 210MM
54V XR FLEXVOLT TABLE SAW 210MM
• 1850W 610M Right Rip • Rack & Pinion Fence for Increased Accuracy
• Cuts up to 83m 19mm plywood.** • Up to 110m hardwood veneer laminate flooring.** • Cuts up to 75m 16mm melamine.**
DWE7485-XE
DCS7485N-XJ
** Using Blade - DT99565-QZ
BONUS*
HEAVY DUTY STAND DE7450-XE
FREE VIA REDEMPTION 54V XR FLEXVOLT 6.0AH STARTER KIT DCB118T1-XE
*Bonus in store at participating retailers
17
54V XR FLEXVOLT PLUNGE SAW 165MM (6 1/2”) 6.0Ah KIT
DCS520T2-XE
DCS520T2-XE - KIT Voltage Blade Speed
1149
$
RRP
54V
FREE VIA REDEMPTION
2500-4200 rpm
Blade Size
18V XR HAMMER DRILL DRIVER
165mm
Bore
20mm
Max Depth of Cut (at 90° on track)
55mm
Bevel Capacity
0-47°
DCD778S2T-XE
Includes DWS5022 1.5m Plunge Saw Guide Rail
999
$
RRP
FREE VIA REDEMPTION
PORTABLE THICKNESSER DW734-XE
DCD776C2-XE
Power Input No Load Speed Max. Capacity
1800 W 10000 rpm 317 mm
Max. Depth of Cut
429
$
RRP
1050W 4.0MM HEAVY DUTY PLANER D26500K-XE Power Input Power Output No Load Speed Maximum Depth of Cut
1050W 620 W 13500 rpm 4 mm
749
$
RRP
900W ¼” PREMIUM KIT ROUTER/LAMINATE TRIMMER
1300W 165MM HEAVY DUTY PLUNGE SAW
Power Input
900 W
Power Input
Power Output
620 W
No Load Speed
1750-4200 RPM
16000-27000 rpm
Blade Diameter
165 MM
D26204K-XE
No Load Speed Plunge Stroke/Movement Collet Size
Planer Width
82 mm
Max. Cutter Diameter
DWE6411-XE
499
$
25 mm
230W ¼ SHEET SANDER
3 mm
RRP
Rebating Depth
FREE VIA REDEMPTION
18V XR HAMMER DRILL DRIVER
55 mm 6.35 mm
DWS520KT-XE
Blade Bore Bevel Capacity
1300 W
20 MM 47°
36 mm
FREE VIA REDEMPTION A SELECTED PLANER, ROUTER OR PLUNGE SAW D26500K-XE, D26204K-XE, DWS520KT-XE
18
18V XR TOOL CONNECT AREA LIGHT
GET CONNECTED. TAKE CONTROL.
DCL074-XJ - BARE UNIT Beam Pattern
Area - 360°
Max. Output
5000lm
Colour Temperature
4000K
IP Rating
54
Weight Runtime
3.8kg
DCL074-XJ
Up to 10Hrs*
399
$
FREE VIA REDEMPTION
RRP
18V XR 4AH BATTERY PACK DCB182-XE
FREE VIA REDEMPTION 18V XR 4AH BATTERY PACK DCB182-XE
DCL079-XJ
18V XR LED TRIPOD WORKLIGHT
379
$
RRP
DCL079-XJ
Compatible with all 18V XR batteries this height adjustable durable worklight is IP rated to work in the toughest conditions. Features 3 brightness settings with a neutral colour perfect for checking surface finishes. Bulb Type Max Output
LED 3000 lm
Colour Temperature
WHEN YOU PURCHASE 18V XR LED TRIPOD WORKLIGHT
4000 K
IP Rating
55
DCL079-XJ
FREE VIA REDEMPTION
RRP
DCB183-XE
LED PIVOT TASK LIGHT
• • • •
• • • •
A SELECTED CORDLESS LIGHT DCL043-XE, DCL050-XE
100-1000 Lumen output 400m distance Articulating lamp head Up to 10 hours runtime*
99
$
RRP
LED PIVOT SPOT LIGHT DCL043-XE
WHEN YOU PURCHASE
169
$
18V XR 2AH BATTERY PACK
DCL050-XE
250-500 Lumen output 9 position articulating lamp head Broad and even beam pattern Up to 10 hours runtime*
*Runtime based on a 18V XR 5Ah Battery Pack.
19
CIRCULAR SAW BLADES C3 NEXT GENERATION CARBIDE
Up to 3 regrinds & 2x life (vs Construction range)
EXPANSION SLOTS
Dampen noise and vibration
THIN KERF
Ideal for cordless and less push force required
STRAIGHT CUTS
Minimise blade deflection
ULTRA-SHARP CARBIDE TEETH Reduces tear out
OPTIMISED GRIND ANGLES Reduces tear out
SINGLE PACKS CAT. NO.
BLADE Ø MM
BORE Ø MM
BLADE THICKNESS MM
KERF THICKNESS MM
KERF TYPE
NO. OF TEETH
RRP
DT10624-QZ
165
16/20
1
1.65
THIN
24
$28.99
DT10640-QZ
165
16/20
1
1.65
THIN
40
$31.99
DT90257-QZ
184
16/20
1
1.65
THIN
24
$31.99
DT90259-QZ
184
16/20
1
1.65
THIN
40
$38.99
DT90280-QZ
210
16/25/30
1.2
1.8
THIN
24
$39.99
DT90281-QZ
210
16/25/30
1.2
1.8
THIN
40
$44.99
DT90282-QZ
216
16/25/30
1.6
2.4
THIN
24
$39.99
DT90262-QZ
216
16/25/30
1.6
2.4
STANDARD
60
$59.99
DT90284-QZ
235
16/25
1.2
1.8
THIN
20
$39.99
DT90285-QZ
235
16/25
1.2
1.8
THIN
40
$49.99
DT90286-QZ
235
16/25
1.2
1.8
THIN
60
$64.99
ALUMINIUM OXIDE BONDED ABRASIVES
MAXIMISED LIFE. EXTREME PERFORMANCE. FEATURES Industrial aluminium oxide grain designed to maximise life and performance. oSa® accredited / Australian Standard AS 1788.11987 compliant. High density grain concentration for longer life. Up to 2x life (vs. High Performance bonded abrasives).
APPLICATIONS For general metal grinding work and cutting on stainless steel, ferrous and non-ferrous metals including weld and surface preparation.
FOR USE WITH
Corded and cordless angle grinders.
20
EXTREME® BONDED ABRASIVES – SINGLE PACKS CAT. NO.
DESCRIPTION
DIA. MM
THICK MM
BORE MM
RRP
DT43967-QZ
THIN FAST CUT
100
1
16.00
$1.99
DT43931-QZ
THIN FAST CUT
115
1
22.23
$2.19
DT43932-QZ
THIN FAST CUT
125
1
22.23
$2.29
DT43969-QZ
THIN CUT
100
1.2
16.00
$1.95
DT43933-QZ
THIN CUT
115
1.2
22.23
$1.99
DT43934-QZ
THIN CUT
125
1.2
22.23
$2.39
DT43938-QZ
THIN CUT
180
1.6
22.23
$4.49
DT43939-QZ
THIN CUT
230
1.9
22.23
$5.09
PRESSURE WASHERS AND GENERATORS 1360
$
RRP
2.2KVA INVERTER GENERATOR
3,300PSI PRESSURE WASHER
• • • • • •
• • • • •
DXIG2200
1045
$
RRP
DXPW3394
2200 starting watts, 1800 running watts LED fuel gauge, usage and runtime meter 22kg for easy transportation Runs at a quiet 55dB(A) for minimum operating noise 4.5L fuel tank 12V dual port USB adaptor
Honda GC190 196cc engine OEM Technologies axial cam pump 32mm heavy-gauge welded tubular steel frame 9m Steel-braided hose with kink & abrasion resistance Oversized 4-Ply pnuematic tyres
1496
$
RRP
3,600PSI PRESSURE WASHER
4,400PSI PRESSURE WASHER
• • • • • •
• • • • • •
DXPW3694
1930
$
RRP
DXPW4415
Honda GX200 Series engine Commerical grade AAA Industries Triplex Pump with brass head 32mm heavy-gauge welded tubular steel frame 9m steel-braided hose with kink & abrasion resistance Oversized 4-Ply pnuematic tyres Professional grade spray lance
DEWALT 420cc Commerical Series OHV engine Commerical grade AAA Industries Triplex Pump with brass head 32mm heavy-gauge welded tubular steel frame 15.2m steel-braided hose with kink & abrasion resistance Oversized 33cm pnuematic tyres 5 nozzles, variable pressure lance
FREE VIA REDEMPTION
WHEN YOU PURCHASE
MIDLAND SAFETY GUMBOOT
A SELECTED GENERATOR OR PRESSURE WASHER
DXIG2200, DXPW3394, DXPW3694, DXPW4415
349
$
RRP
53 LITRE WET DRY VACUUM
130 WATT PORTABLE AIR BLOWER
• • • • • •
• • • • •
DXV53P
53 Litre Poly Tub with a 10yr warranty Large 2.1m long, 64mm diameter hose 1350W 240V motor Large detachable accessories bag Heavy duty rubberized caster wheels Drain port for easy removal of liquids
189
$
RRP
DXAM2250
3 speed settings 130W 240V motor 236 Litre per second air flow 3 user positions - flat, 45 and 90 degrees Weighs 5kg
21
INTERLOCKING STACKABLE STORAGE
NEW
99
$
RRP
99
$
RRP
TSTAK™ POWER TOOL TOTE
TSTAK™ POWER TOOL BAG
• • • •
• • • •
DWST82990-1
1200D Fabric 30kg load capacity Hard base Size: 450mm (W) x 250mm (L) x 350mm (H)
DWST82991-1
1200D Fabric 30kg load capacity Hard base Size: 450mm (W) x 250mm (L) x 300mm (H)
59
$
RRP
TSTAK™ VIII DWST1-71228
• Large interior for bulk storage • 10kg load capacity
22
74
$
RRP
TSTAK™ WATER SEALED ORGANISER DWST82968-1 • • • •
IP54 water and dust resistant Removable cups for small parts, accessories and long tools Transparent lid allows content visibility Size: 337mm (W) x 440mm (L) x 119mm (H)
84
$
RRP
TSTAK™ VII • Size: 275mm (W) x 440mm (L) x 320mm (H)
DWST1-75774
• Large aluminium handle • 30kg load capacity
• Top organiser with fixed dividers in the lid for small parts • Size: 323mm (W) x 442mm (L) x 338mm (H)
INTERLOCKING STACKABLE STORAGE 74
$
RRP
TSTAK™ I
TSTAK™ III
• • • •
• Removable dividers for small parts organisation • 30kg load capacity • Size: 315mm (W) x 430mm (L) x 175mm (H)
DWST1-70704
DWST1-70705
Large aluminium handle 30kg load capacity Adaptable foam insert Size: 330mm (W) x 435mm (L) x 185mm (H)
80
$
RRP
TSTAK™ II
• Dividers for small parts organisation • 30kg load capacity • Size: 320mm (W) x 430mm (L) x 180mm (H)
• Foam insert for tool protection • 30kg load capacity • Size: 330mm (W) x 440mm (L) x 155mm (H)
DWST1-70706
DWST1-70703
74
$
RRP
TSTAK™ MOBILE TOOL BOX
• Includes removable tray for quick access to small tools and accessories • 30kg load capacity • Size: 330mm (W) x 440mm (L) x 300mm (H)
• • • •
DEWALT 500MM TOOL BAG DWST1-81342
133
$
RRP
TSTAK™ VI
FREE VIA REDEMPTION
59
$
RRP
TSTAK™ IV
DWST1-71195
69
$
RRP
DWST1-75799
Durable 7" wheels 30kg load capacity Roll up to 50kg with the telescopic handle Size: 512mm (W) x 435mm (L) x 1000mm (H)
WHEN YOU PURCHASE ANY 2 DEWALT TSTAK STORAGE SYSTEMS
23
THE ULTIMATE TRADIE TRUCK TO
WORK PLAY HARD HARDER.
PURCHASE ANY DEWALT
WIN
PRODUCT FOR A CHANCE TO
A
1500
*
VALUED AT $179,000
ONE ENTRY FOR EVERY $1 SPENT
ENTER VIA WWW.GUARANTEEDTOUGH.COM.AU
*Conditions apply. For full terms and conditions visit www.guaranteedtough.com.au. Promotion valid from 13/06/2019 until 31/12/2019. Retain original receipt/s. Prize is a modified RAM 1500. NSW Permit No. LTPS/19/35313. ACT Permit No. TP19/03520. SA Permit No. T19/924
DEWALT 810 Whitehorse Road Box Hill VIC, Australia 3128 Telephone: 1800 338 002 Fax: 1800 080 898
www.
Your DeWALT Dealer:
.com.au
Accessories as a trademark. DEWALT reserves the right to change any deal, price and / or specification at any time without notice. All products quoted are inclusive of GST. Price includes GST unless otherwise stated. Onsite Offers promotion runs from 01/10/2019 - 31/01/2020. Deals available while stocks last and only at participating stores.
REGISTER AT Be the first to see product news and special offers from DeWALT. Register at MYDeWALT to be sent onsite offers by email. Simply go to www.DeWALT.com.au/MYDeWALT
MY