SP Tools - Destination by Pippos Technology Solutions

DESTINATION STORE TOOL CATALOGUE END OF FINANCIAL YEAR ISSUE 1 APR - 30 JUN 2020

Off Road SERIES Metric & SAE FIELD SERVICE TOOL KIT 406 PIECE 890w x 510d x 615h (mm) • 6 - 26mm & 1/4” - 1” ROE spanners • 1/4”, 3/8” & 1/2”Dr sockets & accessories • Screwdrivers • Hex and Torx keys • Pliers, cutters & shifter

2750 SP50115W

3390 SP50115LE

OWN QUALITY TOOLS AND EQUIPMENT TODAY AND PAY THEM OFF WEEKLY!

YOUR LOCAL STORE:

TOOL KIT ALSO AVAILBLE WITH 32PC 3/4"DR 12PT METRIC/SAE SOCKET SET

• Knife and Inspection mirror • Pick up tool & pick set • Magnetic parts tray • Circuit tester and multimeter • Hammer and tape measure • Screw extractor set • 7 drawer field service box

ALSO AVAILABLE IN BLACK SP50115

TOOL KITS 610PC METRIC/SAE TECH SERIES TOOL KIT WITH POWER TOOL CUPBOARD 1145(W) x 480(D) x 1507(H) KIT INCLUDES

$500

TECH SERIES

APPRENTICE CASH

(SP52387 Only)

THERE IS NO STRONGER STORAGE

ALSO AVAILABE AS A 276PC TOOL KIT • 1/4”, 3/8” & 1/2”Dr sockets & accessories • Metric & SAE Quad Drive ROE spanners 6 to 19mm & 1/4" to 7/8" • Screwdriver & hex key sets • Pliers, cutters & adjustable wrench • Hacksaw & tape measure • Hammer & power bit set

EXTENSION

DUAL LAYER POWDER COAT

INCLUDES QUAD DRIVE SPANNERS

• 1/4”, 3/8” & 1/2”Dr sockets & • Pry bar set accessories • Multigrips • Metric & SAE ROE spanners • Hammers • Metric & SAE flare nut spanners + MUCH MORE • Screwdriver & hex key sets • Pliers & cutters $ • Hacksaw & tape measure • Pin punch & chisel set • Pick & tweezers set SP52387

4995

• 25% thicker steel and a dog bone style frame construction offers maximum rigidity • Soft Close drawers with heavy duty full extension ball bearing drawer slides • SP Cliklok drawer locking system ensures drawers stay closed and secure • Internal locking system for extra security • Side storage compartments suitable for aerosol cans • Corner protection

BALL BEARING SLIDES

QUAD DRIVE, GEAR DRIVE, E-TORX & DOUBLE RING SPANNERS

SECURE LOCK

3395 SP52384

BUILT-IN

METRIC & SAE

SECURE LOCK

• Chisel set • Pry bar set + MUCH MORE

INCLUDES QUAD DRIVE & FLARE NUT SPANNERS

296PC METRIC/SAE TECH SERIES TOOL KIT 730(W) x 480(D) x 1520(H)

METRIC ONLY

METRIC & SAE

1495 SP50033D

KIT INCLUDES QUAD DRIVE, GEAR DRIVE, FLARE NUT & E-TORX SPANNERS

1795 SP52255D

$180 • Quad Drive ROE, Quad Drive Gear Drive ROE & flare nut spanners • E TORX sockets & spanners • 1/4”, 3/8” & 1/2”dr sockets & access. • Hex Keys & screwdrivers • Pliers & cutters, hammer • Adjustable wrench • Power Bit Set • Hammer & tape measure • 7 Drawer Tool Box • 7 Drawer Roll Cab + MUCH MORE

APPRENTICE CASH

212PC METRIC ONLY TECH SERIES TOOL KIT 730(W) x 475(D) x 485(H)

• Metric Quad Drive ROE spanners - 6 to 26mm • 1/4” & 3/8”Dr sockets & accessories

• Screwdrivers & hex keys • Pliers,cutters & shifters • Hammer & power bit set • 7 drawer Tech Series box

SAVE $250 THIS TOOL KIT IS ALSO AVAILABLE WITH A TECH SERIES ROLLER CABINET • Paper towel holder • Side storage compartment/bin • Stainless Steel Worktop • Full Length Deep Drawer

251PC METRIC/SAE TECH SERIES TOOL KIT 730(W) x 47(D) x 507(H)

• Quad Drive ROE spanners - • Hex Keys & screwdrivers 6 to 19mm & 1/4 to 7/8” • 1/4”, 3/8” & 1/2”dr sockets & accessories • Flare nut spanners 10 to 22mm & 3/8" to 7/8" • Pliers & cutters, hammer • Hacksaw & Tape Measure • Pry bars & mini brushes + MUCH MORE

2390

SP50039D

OWN QUALITY TOOLS AND EQUIPMENT TODAY AND PAY THEM OFF WEEKLY! 2

2999 SP52295D

SAVE $250 THIS TOOL KIT IS ALSO AVAILABLE WITH A TECH SERIES ROLLER CABINET

METRIC & SAE

2690

SP52265D

FROM ONLY

PER WEEK

WEEKLY PAYMENT READY RECKONER* LOAN

1 YEAR

2 YEARS

3 YEARS

4 YEARS

$1000 $1500 $2000 $4000 $6000

$25 $37 $50 $99 $148

$13 $20 $26 $52 $78

$10 $14 $19 $37 $55

$8 $11 $15 $29 $44

SP Easy Credit can help you finance your SP Tools purchase over the combined value of $1000 and repayments start from as little as $8 per week*. • FAST, QUICK & EASY

• NO ABN REQUIRED

APPLY AT SPTOOLS.COM

Morris Finance Ltd: ABN 70 083 630 139 Australian Credit Licence: 395 249 - *Weekly payments for the Tools of the Trade payment plans are based on approximately $1000 investment financed over 4 years. These payments are an indication only and variables such as loan type, applicant profile and current interest rates are not taken into account. Exact payments will be provided on application. For approved applicants only, terms and conditions apply.

• Internal locking system for extra security • Heavy duty 28 ball bearing drawer slides • Robust heavy duty wall construction • Double powder coating resists scratching • Full drawer extension capabilities

CUSTOM SERIES

SECURE LOCK EXTENSION BALL BEARING SLIDES

138PC METRIC ONLY CUSTOM SERIES TOOL KIT

668(W) x 445(D) x 465(H)

• Quad Drive ROE spanners - 6 to 19mm & 1/4 to 7/8” • 1/4”, 3/8” & 1/2”Dr sockets & access. 4 - 32mm & 3/16 - 1-1/4” • Adjustable wrench, hammer, pliers &cutters • Screwdrivers & hex key sets • Pin punch set & hook & pick set • Bit set & tape measure • 7 drawer tool box

668(W) x 316(D) x 461(H)

979 SP50087

$100 APPRENTICE CASH

$ METRIC ONLY

SECURE LOCK

NEW KIT INCLUDES 2 ADDITIONAL EVA FOAM TOOL STORAGE TRAYS FULL OF TOOLS

INCLUDES QUAD DRIVE SPANNERS

1249 SP50121X

$ METRIC & SAE

254PC METRIC/SAE CUSTOM SERIES TOOL KIT

134PC METRIC/SAE CUSTOM SERIES TOOL KIT

668 (W) x 445 (D) x 465 (H)

668(W) x 445(D) x 465(H)

• Quad Drive ROE spanners 8 to 19mm & 5/16to 3/4” • 1/4”, 3/8” & 1/2”Dr sockets & access. 4 -32mm & 3/16 - 1-1/8” • Screwdrivers & hex keys • Pliers & cutters • Adjustable wrench • Hammer • 7 Drawer Custom Series Tool Box METRIC & SAE

• Quad Drive ROE spanners - 6 to 19mm & 1/4 to 7/8” • 1/4”, 3/8” & 1/2”Dr sockets & access. 4 -32mm & 3/16 - 1-1/4” • Hex Keys, bit set & screwdrivers • Pliers, Cutters, Hammers & hacksaw • Tape measure & Adjustable wrenches • Hook & pick sets & Knife • Pin punch & chisel set METRIC & SAE + MUCH MORE

995 SP50097

POWDER COAT

218PC METRIC/SAE CUSTOM SERIES TOOL KIT

INCLUDES QUAD & GEAR DRIVE SPANNERS

• Metric Quad Drive ROE spanners - 8 to 19mm • Metric Gear Drive ROE spanners - 8 to 19mm • 1/4”, 3/8” & 1/2”Dr sockets & access. 4 -32mm • Torx & inhex bit sockets • Screwdrivers, pliers & cutters • Adjustable wrench • Hammer & hex keys • 7 drawer tool box

DUAL LAYER

1395 SP50123

INCLUDES QUAD DRIVE SPANNERS

NEW

INCLUDES QUAD DRIVE SPANNERS

KIT INCLUDES 3 ADDITIONAL EVA FOAM TOOL STORAGE TRAYS FULL OF TOOLS

PLUS BONUS 12V MINI 3/8’’DR IMPACT WRENCH • Speed: 2200rpm • Torque: 105Nm

$199 Bonus value

4999 SP50165

$ INCLUDES QUAD DRIVE SPANNERS

METRIC & SAE

1999 SP50104

$ METRIC & SAE

• 1/4", 3/8" & 1/2"Dr sockets & accessories • Quad Drive ROE spanners 6 to 19mm & 1/4 to 7/8” • Screwdriver & hex key sets • Hacksaw & tape measure • Pliers & cutters

• 1/4”, 3/8” & 1/2”Dr sockets & accessories • Quad Drive ROE spanners 6 to 19mm & 1/4 to 7/8” • Flare nut spanners - 10 to 22mm & 3/8" to 7/8" • Screwdriver & hex key sets

680(W) x 460(D) x 1405(H)

2495 SP50105X

METRIC & SAE

307PC METRIC/SAE CUSTOM SERIES TOOL KIT

• Adjustable wrenches • 31pc Bit set ratchet driver • 4pc Pry bar set • Various hammers + MUCH MORE

KIT INCLUDES QUAD DRIVE, GEAR DRIVE, FLARE NUT, E-TORX & DOUBLE RING SPANNERS

INCLUDES QUAD DRIVE& FLARE NUT SPANNERS

244PC METRIC/SAE CUSTOM SERIES TOOL KIT 680(W) x 460(D) x 1405(H)

APPRENTICE CASH

$250

• Pliers & cutters • Multigrips & hammers • Hacksaw & tape measure • Pin punch & chisel set • Pick & tweezers set • Pry bar set + MUCH MORE

610PC METRIC/SAE CUSTOM SERIES TOOL KIT 680(W) x 460(D) x 1405(H)

• 1/4”, 3/8” & 1/2”Dr sockets & accs. • T-handle hex & Torx keys • Quad Drive ROE, stubby ROE Gear • Hammers x3, Pliers, cutters Drive, flare nut & ring spanners & wire strippers • E TORX sockets & spanners • Hand riveter, ratchet set, • 1/2”Dr impact sockets, inhex & Burr set, Digital multimeter, Torx bits work light, Filter wrench • Adjustable wrenches + MUCH MORE

TOOL KITS AVAILABLE MAY 2020

488PC METRIC/SAE SUMO SERIES POWER HUTCH TOOL KIT

METRIC & SAE

347PC METRIC/ SAE SUMO SERIES ROLLER CABINET TOOL KIT

1066(W) x 480(D) x 1610(H) METRIC & SAE

1070(W) x 480(D) x 1090(H)

• 1/4”, 3/8” & 1/2”dr sockets & access. • Gear Drive ROE, stubby ROE & Gear Drive spanners • E TORX sockets & spanners • 1/2”dr impact sockets, inhex & torx bits • Adjustable wrenches • T-handle hex & torx keys • Hammers, pliers, cutters & wire strippers, hand riveter & ratchet set, burr set, digital multimeter, work light, filter wrench & metal rulers • 5 drawer hutch & 13 drawer roll cab.

$300 APPRENTICE CASH

2995 SP50616D

INCLUDES QUAD DRIVE SPANNERS

BUILT-IN POWER BOARD

Built-in power board with 4 individually switched power outlets and 4 USB ports, adjustable shelf and deep drawer KIT INCLUDES QUAD DRIVE, GEAR DRIVE, E-TORX & DOUBLE RING SPANNERS

4995 SP50557

$ BUILT-IN

EXTENSION

POWDER COAT

• 1/4”, 3/8” & 1/2”dr sockets & access. • Quad Drive ROE spanners 6 to 32mm & 1/4" to 1-1/4" • Screwdrivers, hex & torx keys, Adjustable wrenches, Hammers, pliers, cutters & circlip, hacksaw, circuit tester, digital multimeter, power bit set + MUCH MORE

BUILT-IN

DUAL LAYER

EXTENSION

POWDER COAT

CUSTOMISED EDITION

236PC CUSTOM SERIES ROLLER CAB. TOOL KIT WITH SIDE CABINET

SECURE LOCK DUAL LAYER

Built-in power board with 4 individually switched power outlets and 4 USB ports, adjustable shelf and deep drawer

BALL BEARING SLIDES

SECURE LOCK

407PC METRIC/SAE SUMO SERIES TOOL KITS

30%

WIDER

853(W) x 460(D) x 1406(H)

• Gear Drive ROE spanners - 6 - 26mm & 1/4” - 1” • 1/4”, 3/8” & 1/2” Dr sockets & access. • Screwdrivers • Pliers & cutters METRIC & SAE • Adjustable wrench • Pick up tool • Inspection mirror • Hex & TORX keys • Hammer & foldback knife • Magnetic parts tray • Circuit tester & multimeter • Pick set & tape measure • Screw extractor set • 7 drawer Sumo tool box • 7 drawer Sumo roller cabinet

AVAILABLE IN 3 OPTIONS:

1995

METRIC & SAE

SP50628 Black/Red Handles SP50627 Black/Blue Handles SP50626 Black/SIlver Handles

380PC METRIC & SAE OFF ROAD SERIES FIELD SERVICE TOOL KIT

3300 EACH

729(W) x 508(D) x 660(H) • 1/4”, 3/8”, 1/2” & 3/4"dr sockets & access. • Quad Drive ROE spanners 6 to 32mm & 1/4" to 1-1/4" • Screwdrivers, hex & torx keys, Adjustable wrenches, Hammers, pliers, cutters & circlip, hacksaw, circuit tester, digital multimeter, power bit set + MUCH MORE

AVAILABLE IN 3 OPTIONS: SP50175 SP50176 SP50177

EACH

Black Black/Blue Black/Green

3999 SP50218

$ INCLUDES QUAD DRIVE SPANNERS

KIT INCLUDES 3/4"DR SOCKETS & ACCESSORIES

INCLUDES QUAD DRIVE SPANNERS

SECURE LOCK EXTENSION

DUAL LAYER POWDER COAT

SECURE LOCK

BALL BEARING SLIDES

50%

JUMBO SOCKETS UP TO 55mm & 1-7/8"

METRIC & SAE

WEATHER RESISTANT

WEATHER FULL TOOL LISTING RESISTANT

AT SPTOOLS.COM

STORAGE SOLUTIONS SP SIDE CABINETS EXPANDING YOUR Tool STORAGE MADE SIMPLE!

SUMO SERIES POWER HUTCH TOOL BOX & ROLLER CAB COMBO 18 DRAWER

480mm

1066(W) x 480(D) x 1610(H) AVAILABLE MAY 2020

• Built in surge protected powerboard with 4 power outlets and 4 USB ports, ideal for power tools, chargers, etc • Steel pegboard rear wall to organise frequently used tools • SP Cliklok on all drawers ensures drawers stay closed and secure • Anti-slip matting in Hutch

$200

TRADIE CA$H

1610mm

As the need for more storage space arises, side cabinets are a great option for adding more room to your SP Tool Kit. SP’s Range of side cabinets are designed to easily slide on to and hang off the side of both Custom and Sumo Series Roller cabinets. No screwing anything together.

1995 SP40698

SUITS CUSTOM & SUMO SERIES ROLLER CABINETS

7 DRAWER TOOL CABINET

COMPARTMENT WITH ADJUSTABLE SHELF

426(W) x 460(D) x 844(H)

• Heavy duty 28 ball bearing drawer slides • Full drawer extension capabilities

495 SP40131

OFF ROAD SERIES FIELD SERVICE TOOL BOX - 7 DRAWER 729(W) x 508(D) x 660(H)

1195 SP40317

259 SP40132

SP40133

INDUSTRIAL DUTY STEEL TRUCK/UTE BOX - 3 DRAWER

OFF ROAD SERIES FIELD SERVICE TOOL BOX - 7 DRAWER

700(W) x 400(D) x 485(H)

890(W) x 510(D) x 615(H)

• Heavy gauge steel construction • Powder coating resists scratching • Heavy duty 28 ball bearing drawer slides • 4x big grip side carry handles • Weather resistant • Includes water gutters in all drawers $ • Lockable

1175 SP40322

585 SP40330

BUILT TO LAST

$60

TRADIE CA$H

IN THE MIDDLE? Drop down or remove the adjustable shelf

Ideal for the back of work vehicles

BALL BEARING SLIDES

EXTENSION

PROFESSIONAL 3 SHELF SERVICE TROLLEY NEED MORE STORAGE 870(W) x 475(D) x 648(H)

• Screwdriver slots on both sides of trolley • 2x Swivel lockable heavy duty castors • 2x Fixed heavy duty castors

299

WEATHER RESISTANT

900(W) x 490(D) x 890(H)

• Heavy duty 28 ball bearing drawer slides • Full drawer extension capabilities

• Heavy duty wall construction • Full roll cage protection • Drop down security front panel • Internal locking system • Heavy duty 28 ball bearing drawer slides • SP Cliklok on all drawers • Skid rail base

• Constructed with 50% thicker steel • Full roll cage protection • Drop down security front panel • Dual gas strut lid stays • Internal locking system for extra security • Full drawer extension capabilities • Heavy duty 28 ball bearing drawer slides • SP Cliklok on all drawers • Skid rail base

2 DRAWER TOOL TROLLEY

368(W) x 460(D) x 750(H)

• Heavy duty steel lockable cainet • Includes one adjustable shelf

1066mm

POWER TOOL CABINET - 3 DRAWERS

DUAL LAYER POWDER COAT

595

HEAVY DUTY STEEL $ WORKSHOP BENCH 1250(W) x 645(D) x 872(H)

SP40410

199

SP40019 • Internal locking system for extra security • Heavy duty 28 ball bearing drawer slides • Robust wall construction

359 SP40107

TRADIE CA$H

• Solid Steel Frame • Adjustable middle tray - drop down or remove for more tray space • 2x Fixed & 2x lockable swivel heavy duty castors • 150kg Load Capacity

SP TOOLS HAS TRADIES COVERED SIMPLY PURCHASE A 'TRADIE CASH' MARKED PRODUCT AND RECEIVE AN ONLINE VOUCHER TO SPEND AT WWW.SPTOOLS.COM Visit sptools.com for full terms & conditions.

2X LOCKABLE DRAWERS

• Heavy duty steel frame • 34 Litre storage cap. • Rubber worktop • Can be bolted to • Load capacity: 400kg the floor

LIMITED STOCK

REDEEMING IS QUICK AND EASY. VISIT OUR APPRENTICE PAGE AT SPTOOLS.COM FOR MORE INFORMATION

STORAGE SOLUTIONS CUSTOMISED EDITION

STACKABLE STORAGE SOLUTIONS

CUSTOM SERIES ROLL CAB. TOOL BOX WITH SIDE CABINET

CUSTOM SERIES TOOL BOX

11 DRAWER 1596(W) x 480(D) x 900(H)

• Internal locking system • Heavy duty 28 ball bearing drawer slides • Robust wall construction • Double powder coating • Full drawer extension capabilities

AVAILABLE IN 3 COLOUR OPTIONS

DEEP DEPTH 7 DRAWER 668(W) x 445(D) x 465(H)

399

7 DRAWER 680(W) x 460(D) x 940(H)

• Internal locking system • Heavy duty 28 ball bearing drawer slides • Robust wall construction • Double powder coating • Full drawer extension capabilities • Heavy duty castors - 2x lockable swivel

$65

1250 EA.

DUAL LAYER POWDER COAT

APPRENTICE CASH

CUSTOM SERIES ROLLER CABINET

640 SP40104

SP40160 Black/Silver Handles SP40161 Black/Blue Handles SP40162 Black/Red Handles

$40

SP40102

• Heavy duty 28 ball bearing drawer slides. • Robust wall construction. • Full drawer extension capability. • Includes bonus side cabinet

STEEL ORGANISER UNIT - 18 DRAWER 826(W) x 300(D) x 305(H)

• Ideal for storing and organising small parts and components in workshops or on mobile service vehicles • Heavy gauge steel frame • 18 heavy duty plastic drawers with stops stops ensure $ ABLE TO MOUNT • Drawer drawers stay closed TO YOUR VAN and secure SP40568

240

TRUCK BOXES WITH TOTE duty 1.2mm steel construction TRAYS •• Heavy Steel tote tray with handles

APPRENTICE CASH

OPEN MOUTH TOOL BAG 580(W) x 540(D) x 380(H)

• Semi-rigid construction • Easy access pockets and compartments for your storage needs

SUMO SERIES TOOL BOXES

7 DRAWER 840(W) x 445(D) x 462(H) • 30% wider storage capacity • Dual gas strut lid stays • Robust wall construction • Heavy duty 28 ball bearing drawer slides • Full drawer extension capability • Double powder coating SP40120 Black SP40121 Blue/Black SP40122 Green/Black

625 EACH

MODEL PIECE SP40301 30L - 559 x 236 x 229mm SP40302 81L - 667 x 287 x 424mm

PRICE $99 $119

• Heavy duty fabric & moulded waterproof base for long lasting durability

SP40360

SUMO SERIES ROLLER CABINET WITH POWER TOOL CUPBOARD AND BUILT-IN POWER BOARD 9 DRAWER 1070(W) x 480(D) x 1090(H)

SUMO SERIES ROLLER CABINET 7 DRAWER 853(W) x 460(D) x 779(H) (944h with castors)

• Stainless steel work top • Heavy duty 28 ball bearing drawer slides • Internal locking system • SP Cliklok drawer locking system ensures drawers stay closed and secure • Heavy duty wheels • Double powder coating resists scratching

$150

• 30% wider storage capacity • Robust wall construction • Heavy duty 28 ball bearing drawer slides • Full drawer extension capability • Double powder coating resists scratching • Heavy duty castors - 2x lockable swivel

1495 SP40118

TRADIE CA$H

SP40125 Black SP40126 Blue/Black SP40127 Green/Black

950 EACH

$ COLOUR OPTIONS AVAILABLE

BUILT-IN POWER BOARD Built-in power board with 4 individually switched power outlets and 4 USB ports, SECURE LOCK adjustable shelf and deep drawer BUILT-IN

EXTENSION

DUAL LAYER POWDER COAT

SECURE LOCK

ILABLE ALSO AVA COMBO COMPACT LIGHTING PACK

LIGHTING CORDLESS LED

COMBO KIT INLCUDES • Mini COB LED Flood Light • Universal Clamp • Slimline COB LED Work Light/Torch

FLOOD LIGHTING

149

MINI COB LED OPTICAL LENS FLOOD LIGHT PLUS UNIVERSAL CLAMP

• High power 10w COB LED light • Multifunctional work lamp ideal for applications where power is limited • 2 brightness settings: 1000Lumins & 500Lumins • 3 to 6 hour run time • Compact “pocket” size • Includes 180° rotatable magnetic bracket • Rechargeable micro USB system • IP65 – Resistant to water and dust infiltration • Includes universal clamp - secured by M8 connector • Includes 12v car charger adaptor

COB LED HEADLAMP WITH ON/OFF MOTION SENS0R

99 SP81482 $

LUMENS

1000 500 WORK LIGHT

180° MAGNETIC SWIVEL ARM

Detachable Clamp allows for light to be securely clamped onto a variety of objects such as doors, door frames, benches, ladders etc.

SP81492 LUMENS

300 150 WORK LIGHT

SENSOR

RECHARGEABLE

LAMP TILT

WORK LIGHT MAG BASE

LIGHTWEIGHT

• Ultra Bright 6 COB LED with brightness settings: 350 & 250Lumens • Pivoting Mag-Base - 180° • IP 65 dust proof and water resistant • Fold away hook and stand • Rechargeable • Micro USB Charging System • Includes 12v Car Charger

WORKLIGHT

WORK LIGHT

DUAL SETTINGS

Li-Ion RECHARGEABLE

LONG RUN TIME

SP81450

USB & CAR CHARGER

SP81442

WORK LIGHT

COB LED MAGBASE WORK LIGHT

1000 150 TORCH

600 300

RECHARGEABLE

Li-Ion

MOTION

• High power SMD LED worklight with brightness settings: 280 & 150Lumens • Bright LED torch/top light 50Lumen • Slim design for hard to reach areas • Special optical lens offering 90° flood light compared to the 30° from normal work lights • Car charger included

LUMENS

Li-Ion

LUMENS

360° ADJUSTABLE SWIVEL HEAD

WORK LIGHT

LUMENS

• Ultra bright COB LED work light - 1000Lumen • High power LED torch/ top light - 150Lumen • Slimline head • Adjustable dimmer • 120° Pivoting light head • 360° fold out hook • Water/splash resistant - IP54 • Impact resistant - IK07 • Rechargeable Lithium-ion • Battery level and charge indicator • USB-C charge

WORKLIGHT DUAL SETTINGS

45°

280 150 50 TORCH

SLIMLINE COB LED WORKLIGHT & TORCH

69 SP81449

with approx. 3 hours run time • Brightness setting 2: 600 Lumens with approx. 1.5 hours run time • 180° strong magnetic pivoting base • 360° full swivel ball joint head • Fold out 360° Swivel hook

SMD LED SLIMLINE WORKLIGHT/TORCH

NEW

SAVE $39

COMPACT COB LED WORKLIGHT • Ultra bright 6W COB LED $ • Brightness setting 1: 300 Lumens

45° TILT

SMART ON/OFF MOTION SENSOR

WORK LIGHT

INCLUDES UNIVERSAL CLAMP

Easily adjusts light to shine in any direction

• Ultra bright 3w COB LED headlamp with 2 brightness settings 300 & 150 Lumens • 45° tilt light for flexible light positioning • Adjustable headband with non-slip grip

Quickly turn the light on/off. Ideal for mechanics whose hands are usually greasy/oiley

SP89010

COB LED ULTRA BRIGHT WORKLIGHT/TORCH

INTENSE BRIGHTNESS

WORKLIGHT DUAL SETTINGS

Capable of ultra bright illumination, ideal for vehicle body colour inspection

Li-Ion

• Ultra bright 6W COB LED with 3 brightness settings - 150, 300 & 700 Lumens • Bright LED torch/top light: 120 Lumens • Strong magnetic pivoting base - 180° • 360° fold out swivel hook • Water/splash resistant - IP54 • Impact resistant - IK07 $ • Rechargeable Lithium-ion • Micro USB charging system

RECHARGEABLE

MAG BASE

180° PIVOTING BASE

LUMENS

TILT

89 SP81446 $

SLIMLINE

Li-Ion RECHARGEABLE

DIMMABLE

120° PIVOTING SHAFT

MAG BASE

180° PIVOTING BASE

WORK LIGHT

WIRELESS CHARGE LIGHTING SMD LED WIRELESS CHARGE WORKLIGHT & TORCH TWIN PACK

$20

WORKLIGHT/TORCH

• SMD LED Worklight: 500 Lumen • LED Torch: 150 Lumen • Adjustable Dimmer Worklight: 500 to 75 Lumens • Flexible Magnetic Base • 180° Fold Out Hook

199 SP81499

APPRENTICE CASH Li-Ion RECHARGEABLE

COMPACT WORKLIGHT/TORCH

• SMD LED Worklight: 300 Lumen • LED Torch: 100 Lumen • Adjustable Dimmer Worklight: 300 to 30 Lumens • Flexible Magnetic Base • 180° Fold Out Hook

DUAL ZONE CHARGING PAD MAG BASE

Li-Ion RECHARGEABLE

700 300 150 120 TORCH

350 250 TORCH

WORK WORKLIGHT LIGHT

120°

99 SP81457

LIGHT CONTROL 3 SETTINGS

• Dual charging zones • Charges various devices • Magnetic zones holds lights firmly in place while charging • Powerful rear magnet - Ideal for mounting to steel tool box • Wall mountable

OWN QUALITY TOOLS AND EQUIPMENT TODAY AND PAY THEM OFF WEEKLY!

DIMMABLE

MAG BASE

Charges compatible SP lights, latest Android & iPhones, Apple Watches, AirPods, tablets & more. LUMENS

180° PIVOTING BASE

LUMENS

500 150 300 100 WORK LIGHT

WORK LIGHT

SP EASY CREDIT CAN HELP YOU FINANCE YOUR S P TOOLS PURCHASE OVER THE COMBINED VALUE OF $1000 AND REPAYMENTS START FROM AS LITTLE AS $8 PER WEEK*.

APPLY NOW AT SPTOOLS.COM

QUAD DRIVE SP Tools patented QUAD DRIVE open end offers 4 times the gripping power of a standard ROE spanner by wrapping around the fastener and maximising the contact on the flat sides of the fastener head, not the points.

$20 STANDARD SPANNER

SHIFTERS

199

$ 18PC 15° OFFSET METRIC/SAE COMBINATION QUAD DRIVE SPANNER SET

SP QUAD DRIVE

STUBBY COMBINATION ROE QUAD DRIVE SPANNER SETS

APPRENTICE CASH

SP10001

CONTAINS BOTH METRIC & SAE SPANNERS • METRIC: 8, 10, 11, 12, 13, 14, 15, 16, 17 & 19mm • SAE: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 & 7/8”

COMBINATION ROE QUAD DRIVE SPANNER SETS

CONSTRUCTION ADJUSTABLE WRENCH - 15” • Multiple spanner sizes in one tool • Fits nuts and bolts up to 46mm • Continuous taper end for ease of bolt/rivet hole alignment • Industrial black finish for corrosion resistance • Chrome Vanadium Steel (Cr-V) for high strength & durability • 400mm

$10 TRADIE CA$H

99 SP18093 $

ADJUSTABLE WRENCHES BLACK OXIDE FINISH

MODEL SP18011 SP18016 SP18031 SP18038 SP18046

SIZE PRICE 100mm $19 150mm $24 300mm $39 375mm $79 450mm $135

AVAILABLE IN METRIC & SAE SETS MODEL SP10027 SP10077

PIECE SIZE 11pc Metric • 8, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm 8pc SAE

MODEL SP10014

• 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 $79 & 3/4”

SP10063

0º OFFSET EXTRA LONG DOUBLE BOX RING SPANNER SETS

T818000

AVAILABLE IN METRIC & SAE SETS MODEL SP10036

PIECE 6pc Metric

SIZE • 8x10, 12x14, 13x 15, 16x18, 17x19, 22x24mm

PRICE $219

SP10084

4pc SAE

• 3/8x5/16”, 1/2x7/16”, 5/8x9/16” & 3/4x11/16”

$195

13pc SAE

• 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 & 1”

PRICE $120 $132

DOUBLE FLARE NUT SPANNER SETS • Oversized spanner surfaces grip multiple sides to reduce rounding • Ideal for use on soft fittings in aluminium, copper and brass on fuel, brake, air conditioning, diesel lines and diesel injectors • Chrome Vanadium Steel (Cr-V) for high strength & durability • Tough triple chrome finish MODEL SP10044 SP10094

15° OFFSET COMBINATION ROE SPANNER SET

PIECE 4pc Metric 4pc SAE

PRICE $59 $59

15° OFFSET REVERSIBLE ROE GEAR DRIVE SPANNER SETS

• 15° Offset allows users to work quickly and efficiently in tight spaces. • Quick reverse switch eliminates the need to turn over the spanner to change ratchet direction. • Small head profile designed for working in confined spaces. • Tough triple chrome, high polish finish. • Chrome Vanadium Steel (Cr-V) for high durability. MODEL T810009

PIECE SIZE 14pc Metric • 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm

AVAILABLE IN METRIC & SAE SETS

ADJUSTABLE WRENCH SET 3 PIECE SET INCLUDES • 150mm (6”) • 200mm (8”) • 250mm (10”)

AVAILABLE IN METRIC & SAE SETS

PRICE $99

REVERSIBLE

AVAILABLE IN METRIC & SAE SETS PIECE SIZE PRICE 9pc Metric • 10, 11, 12, 13, 14, 15, 17, 18 & 19mm $65

FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT

MODEL PIECE SIZE PRICE T810109 9pc Metric • 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm $99 T810157 7pc SAE • 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 & 3/4’’ $89

SPTOOLS.COM

SPANNERS SPEED DRIVE SP SPEED DRIVE allows the open end to quickly ratchet fasteners without removing the spanner from the fastener. This design results in much faster bolt and nut removal where only an open end spanner can be used.

GEAR DRIVE DOUBLE RING 15° OFFSET DOUBLE GEAR DRIVE RING SPANNER SETS • Dual reversible GEAR DRIVE ends • FLAT DRIVE TECHNOLOGY - The flat drive ring end design allows for maximum contact between the tool and fastener. The extra contact means the applied torque can be increased and risk of damage to the fastener is decreased.

$15

SP Tools patented GEAR DRIVE spanners are precisely machined with deeper gears for greater torque loading and reliability with 72 teeth that only require 5° of space per turn. The ratchet head allows the spanner to travel without having the need to remove the spanner from the fastener.

5°

TURN

TEETH

SP GEAR DRIVE

FLEX HE

15° OFFSET SPEED DRIVE GEAR GRIVE SPANNER SETS

COMPACT & SLEEK DESIGN

APPRENTICE CASH

REVERSIBLE

AVAILABLE IN METRIC & SAE SETS

$10 APPRENTICE CASH

REVERSIBLE

AVAILABLE IN METRIC & SAE SETS MODEL PIECE SIZE PRICE SP10406 6pc Metric • 8x9, 10x11, 12x13, 14x15, 16x18 & 17x19mm $199 SP10454 4pc SAE • 5/16x3/8, 7/16x1/2, 9/16x5/8 & 11/16x3/4” $159

MODEL SP10139 SP10169

PIECE SIZE 12pc Metric • 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm 8pc SAE • 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 & 3/4”

MODEL SP10222 SP10272

PIECE SIZE 12pc Metric • 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm 8pc SAE • 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 & 3/4”

PRICE $229 $199

0° OFFSET SPEED DRIVE GEAR GRIVE SPANNER SETS

$20 APPRENTICE CASH

0° OFFSET EXTRA LONG BOX GEAR DRIVE DOUBLE RING SPANNER SETS • DUAL FLAT DRIVE TECHNOLOGY - The dual flat ring end design allows for maximum contact between the tool and fastener. The extra contact means the applied torque can be increased and risk of damage to the fastener is decreased. • Small head profile designed for working in confined spaces • Tough triple chrome, high polish finish.

AVAILABLE IN METRIC & SAE SETS PRICE $199 $149

STUBBY 15° OFFSET GEAR DRIVE RING ROE QAUD DRIVE SPANNER SETS

AVAILABLE IN METRIC & SAE SETS MODEL PIECE SIZE PRICE SP10412 12pc Metric • 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm $369 SP10468 8pc SAE • 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 & 3/4” $259

• FLAT DRIVE TECHNOLOGY - The flat drive ring end design allows for maximum contact between the tool and fastener. The extra contact means the applied torque can be increased and risk of damage to the fastener is decreased. • Quad Drive open end offers 4 times the gripping power of a standard ROE spanner by wrapping around the fastener and maximising the contact on the flat sides of the fastener head, not the points.

APPRENTICE CASH

REVERSIBLE

AVAILABLE IN METRIC & SAE SETS MODEL SP10131 SP10188

PIECE SIZE PRICE $225 11pc Metric • 8, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm 8pc SAE • 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 & 3/4” $159

ARE YOU AN APPRENTICE?

SIMPLY PURCHASE SPECIALLY MARKED PRODUCTS FROM ONE OF OUR SP DEALERS NATION WIDE. YOU WILL THEN BE ELIGIBLE TO RECEIVE THE SP APPRENTICE CASH AMOUNT ASSOCIATED WITH THAT PRODUCT, IN AN ONLINE VOUCHER TO USE TOWARDS YOUR NEXT PURCHASE. Visit sptools.com for full terms & conditions.

BANK UP SOME APPRENTICE CASH AND GET THE TOOLS YOU ACTUALLY WANT. ON US.

REDEMPTION IS QUICK AND EASY. HEAD OVER TO OUR APPRENTICE PAGE AT SPTOOLS.COM TO REDEEM TODAY!

SOCKET RAIL SETS 3/8"DR STUBBY METRIC ONLY SOCKET RAIL SETS - 10 PIECE

32PC 3/8” DR 12PT METRIC/SAE SOCKET SET

6 PT

PLUS BONUS FLEXHEAD STUBBY RATCHET

LOW PROFILE, COMPACT DESIGN

MODEL POINT SIZE PRICE SP20235 6 PT • 8, 10, 12, 13, 14, 15, 16, 17, 18 & 19mm $49.95

3/8"DR METRIC ONLY SOCKET RAIL SETS - 10 PIECE

23PC 1/4”DR METRIC/SAE SOCKET SETS AVAILABLE IN 6PT & 12PT SETS

• METRIC - 6 to 22mm • SAE - 1/4 to 7/8” • Spark Plug Sockets - 5/8 & 13/16” • 45T Ratchet • Flex Handle • Extension Bar - 150mm • Universal Joint

119 SP20200

APPRENTICE CASH

MODEL POINT SIZE PRICE SP20232 6 PT • 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm $39 SP20230 12PT • 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm $39

235

$25 AVAILABLE IN 6PT & 12PT SETS

• METRIC: 4 to 13mm • SAE: 3/16 to 1/2” • 45T Ratchet • Flex Handle - 145mm • Extension Bars - 50 & 150mm

SP20280

1/4”, 3/8” & 1/2”DR 12PT METRIC/SAE SOCKET SET 59 PIECE 1/4”DR SOCKETS & ACCESSORIES • 4, 5, 6, 7, 8, 9, 10, 11 & 12mm • 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 & 1/2” • 45T Ratchet & Wobble Extension Bar - 50mm

MODEL POINT SIZE PRICE SP20233 6 PT • 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 & 3/4” $29 SP20231 12PT • 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 & 3/4” $29

41PC 1/2”DR METRIC/SAE SOCKET SET

50PC 3/8”DR SOCKET SET

12 PT

AVAILABLE IN METRIC & SAE SETS

T820201

MODEL PIECE SIZE PRICE SP20330 12pc Metric • 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, $59 22 & 24mm $55 SP20331 8pc SAE • 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 & 1”

1/2"DR TORX ONLY SOCKET RAIL SETS - 10 PIECE - (55mm) • METRIC - 10 to 32mm • SAE - 3/8 to 1-1/4" • Spark Plug Sockets - 5/8 & 13/16” • 45T Ratchet • Flex Handle • Extension Bars - 125 & 250mm • Universal Joint PRICE $95

1/2"DR METRIC ONLY INHEX/SPLINE SOCKET RAIL SET - 13 PIECE

$10

• Inhex Short (55mm) - 6, 7, 8, 10, 12, 14 & 17mm • Spline Short (55mm) - 6mm • Inhex Long (140mm) - 8 & 10mm • Spline Long (100mm) -8, 10 & 12mm

199 SP20300

• METRIC - 8 to 22mm • SAE - 1/4 to 7/8” • Ratchet • Universal joint • Extension bar • Spinner handle • Adapters • Coupler • Bit set - 18pc • Spark Plug Sockets - 5/8 & 13/16”

3/4” DR 12PT METRIC/ SAE SOCKET SET 32 PIECE METRIC 3/4”Dr: • 19, 22, 24, 27, 30, 32, 36, 38, 41, 46, 50 & 55mm

APPRENTICE CASH

679

SP20400

SAE 3/4”Dr: • 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-5/8 & 1-7/8”

SP20566

12 PT

1/2”DR SOCKETS & ACCESSORIES • 21, 22, 24, 27, 30 & 32mm • 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8 & 1-1/4” • 45T Ratchet • Flex Handle - 250mm & Wobble Extension Bar - 75mm

AVAILABLE IN 6PT & 12PT SETS

MODEL SIZE SP20568 • T20, T25, T27, T30, T40, T45, T50, T55, T60, T70 Short (55mm) Sockets

PRICE $72 $72

3/8”DR SOCKETS & ACCESSORIES • 13, 14, 15, 16, 17, 18 & 19mm • 9/16, 5/8, 11/16 & 3/4” • Spark Plug Sockets - 5/8 & 13/16” • Inhex - 6, 7, 8, 9 & 10mm, 3/16, 7/32, 1/4, 5/16 & 3/8” • 45T Ratchet & Wobble Extension Bar - 75mm

3/8"DR SAE ONLY SOCKET RAIL SETS - 8 PIECE

1/2"DR 12PT SOCKET RAIL SETS

MODEL Point SP20100 6 Point SP20102 12 Point

ACCESSORIES: • 24T Ratchet • Flex Handle - 450mm • Extension Bars - 200 & 400mm • Extendible Handle - 450 to 750mm • Universal Joint

FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT

SPTOOLS.COM

12 PT

SOCKETS & ACCESSORIES 1/2"DR IMPACT SOCKET SET METRIC ONLY - 15 PIECE

IMPACT SOCKET RAIL SETS & Accessories 3/8"DR 6PT METRIC IMPACT SOCKET RAIL SET - 10 PIECE

SET INCLUDES • 10, 11, 12, 13, 14,15, 17, 18, 19, 21, 22 & 24mm • Impact Extension Bars - 75mm & 125mm • Impact Universal Joint MODEL SIZE SP20250 • 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm

• Flat drive technology offers maximum contact and grip • Trade tough - suitable for use with pneumatic and electric/cordless impact wrenches • Premium quality, high strength Chrome Molybdenum steel (Cr-Mo) for extreme durability • Tools housed in a heavy duty steel case

PRICE $49

3/8"DR 6PT DEEP METRIC IMPACT SOCKET RAIL SET - 10 PIECE

129

SP20310 FLAT DRIVE TECHNOLOGY MAXIMISES CONTACT ON THE FLAT SIDES OF THE BOLT OR NUT, NOT THE POINTS.

3/4” DR IMPACT SOCKET SETS

MODEL SIZE SP20260 • 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm

1” DR DEEP IMPACT SOCKET SETS 6 PT

$20 JUMBO SIZES

TRADIE CA$H

AVAILABLE IN METRIC & SAE SETS

MODEL PIECE SIZE PRICE SP20410 8pc Metric • 24, 27, 30, 32, 34, 36, 41 & 46mm $195 SP20415 8pc SAE • 1, 1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-3/8, $195 1-7/16 & 1-1/2”

6 PT

DEEP JUMBO SIZES

AVAILABLE IN METRIC & SAE SETS

MODEL PIECE SIZE PRICE SP20510 9pc Metric • 27, 30, 32, 34, 36, 38, 41, 46 & 50mm $269 SP20515 9pc SAE • 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-5/8, $269 1-3/4, 1-7/8 & 2”

3/8"DR REVERSIBLE RATCHET

1/4"DR PROFESSIONAL RATCHET

• Specially strengthened ratchet gear teeth to sustain maximum applied torque

• Comfort grip handle • Specially strengthened ratchet gear teeth to sustain maximum applied torque • Reversible • Socket quick release

29 T822305 $

TEETH

.95

• Steel handle - one piece • Reversible

• 14mm-9/16” • 16mm-5/8” • 21mm-13/16”

MODEL SP21305

DRIVE 1/4"

SP22305 SP23305

3/8" 1/2"

PRICE $29 $39 $69

• Adaptor allows for sockets from other drives to be used on noncorresponding ratchet handles • Chrome Vanadium Steel (Cr-V) for high durability

$ • 30° Offset universal extensions

TEETH

1/2"DR SOCKET ADAPTOR 1/2"F x 3/8"M

3/8”DR MAGNETIC SPARK PLUG SPLINE SOCKET SET

SP22499

OWN QUALITY TOOLS AND EQUIPMENT TODAY AND PAY THEM OFF WEEKLY!

1/2” DR 6PT DEEP METRIC IMPACT SOCKET RAIL SET - 11 PIECE

MODEL SIZE SP20360 • 10, 12, 13, 14, 15, 17, 18, 19, 21, 22 & 24mm

RATCHETS & SOCKET ACCESSORIES

PRICE $95

.95

SP23326

EXTENSION BARS INDIVIDUAL

• Knurling on bars allows for improved grip, especially useful in oily/greasy conditions DRIVE 1/4"DR 1/4"DR 1/4"DR

MODEL SP21315 SP21316 SP21317

LENGTH PRICE $8 50mm 100mm $9.50 150mm $11

3/8"DR 3/8"DR 3/8"DR

SP22315 SP22317 SP22316

75mm $9.95 150mm $14 250mm $18

1/2"DR 1/2"DR 1/2"DR

SP23315 SP23316 SP23317

75mm 125mm 250mm

IMPACT UNIVERSAL JOINTS • Flexible Joint - Ideal for accessing hard to reach nuts and bolts • High strength Chrome Molybdenum MODEL SP22350 SP23350 SP24350 SP25350

DRIVE 3/8"Dr 1/2"Dr 3/4"Dr 1"Dr

PRICE $19 $22 $69 $95

SLOGGING SPANNERS

NEW • Slugging /Slogging /Striking Spanners designed for use with a sledgehammer or pneumatic hammers for heavy mechanical applications. • Short profiled handle with heavy duty striking end • Spanners are drop forged from industrial quality steel to withstand heavy impact

$13 $15 $24

HEAVY DUTY MAGNETIC SOCKET RAILS • Ball bearings hold sockets firmly to rail • Magnetic rail base

Sockets not included - rail only MODEL SIZE PRICE SP201RM 1/4" Holds 10pc $15 SP203RM 1/2" Holds 10pc $35

PRICE $99

INDUSTRIAL QUALITY

MODEL SP19430 SP19432 SP19434 SP19436 SP19438 SP19441 SP19446 SP19455 SP19460 SP19465 SP19475 SP19480 SP19485 SP19490 SP19495 SP19500

SIZE 30mm 32mm 34mm 36mm 38mm 41mm 46mm 55mm 60mm 65mm 75mm 80mm 85mm 90mm 95mm 100mm

PRICE $25.30 $26.40 $30.80 $33.00 $35.20 $37.40 $49.50 $62.70 $73.70 $90.20 $123.20 $147.40 $180.40 $212.30 $228.80 $245.30

SP EASY CREDIT CAN HELP YOU FINANCE YOUR S P TOOLS PURCHASE OVER THE COMBINED VALUE OF $1000 AND REPAYMENTS START FROM AS LITTLE AS $8 PER WEEK*.

APPLY NOW AT SPTOOLS.COM

SCREWDRIVERS SCREWDRIVER SET IN X-CASE - 8 PIECE

SCREWDRIVER SET IN X-CASE - 20 PIECE

$10

HEX SHAFT GO THRU • 4 x Slotted with Hex Bolster • 4 x Phillips with Hex Bolster

STANDARD & ELECTRICAL • 6x Slotted • 6x Phillips • 8x VDE Insulated

APPRENTICE CASH

• Go-thru with steel strike cap for use with a hammer to loosen stubborn screws $ • Hex shaft and hex bolster collar allows the use of a spanner or gear ratchet for greater torque in loosening or SP34020 tightening screws

• VDE Screwdrivers - Insulated handle & blades - Safe for applications up to 1000 V AC/1500V DC • Durable ergonomic handles, featuring anti-slip grip • Magnetic tips for greater fastener control • Chrome Vanadium Steel (Cr-V) shafts • Hardened and tempered for strength and durability

STRIKING CAP

HEX BOLSTER COLLARS

$10

SCREWDRIVER SET IN X-CASE - 8 PIECE

SCREWDRIVER 6 PIECE

SCREWDRIVER SET 13 PIECE

• T8, T10, T15, T20, T25, T27, T30 & T40

• 3 x Slotted • 3 x Phillips

• 8 x Slotted • 5 x Phillips

PRECISION

TORX

• Essential in the removal of Torx Tamer proof safety screws • Chrome Vanadium Steel (SVCM) shafts

SP34005

79 SP34050 $

KEY SETS

• Tapered handle • Revolving handle cap • Hardened magnetic tips

3PC COMBO 9PC KEY SETS BLACK OXIDE

• Chrome Vanadium Steel (Cr-V) Hex Keys • Double ended • Ball drive tips (metric & SAE)

3PC COMBO HEX & TORX KEY SET • Set of 3 hex and torx keys (9pc metric, 6pc SAE & 7pc Torx)

• All Hex keys fold away into the handle for easy storage • Magnetic tips • Cr-V blades • Heavy Duty handle for max torque

FINGER TIP RATCHET/ SOCKET SET EXTREME COMPACT

• Compact, low profile 10 & 13mm finger ratchet drivers perfect for loosening/ tightening bolts and nuts in tight work spaces and close quarters • Specially strengthened ratchet gear teeth to sustain maximum applied torque • Precision ratcheting mechanism delivers smooth fastening and unfastening • Flip ratchets over for reverse function

59 SP39605 $

59 SP34500

19 T834560

BIT SETS

• Induction hardened, magnetic tips • Chrome Vanadium (SVCM) shaft

T834000

T-HANDLE TORX KEY SET 8 PIECE SIZES INCLUDED • T8, T10, T15, T20, T25, T30, T40 & T50 FEATURES • Chrome Vanadium Steel (Cr-V) blade • Hardened and tempered for strength and durability • Easy grip comfort handle for maximum torque & reduced hand fatigue • Double ended • Metal storage stand can be mounted on the wall or workbench

MAGNETIC FOLDING

T834030

AC 1000v IEC 60900

APPRENTICE CASH

LOW PROFILE Perfect set for reaching sockets and screws in extremely difficult to reach, tight and confined areas.

1/4”DR POWER BIT SET - 67PC Includes hexagon, phillips, pozidrive, square slotted, spanner, torx star, tamper torx, torx plus, spline bits, universal bit holder and adaptors • Diverse range of bit types organised in a marked foam insert and sturdy case • Hardened and tempered bits with a shot blast finish

SP39510

FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT

SP34708

$10 APPRENTICE CASH

1/4” BIT SET & 2-IN-1 ROTATABLE RATCHET DRIVER - 9PC 90° ROTATABLE RATCHET DRIVER • Head swivels and locks to 90° for hard to reach applications • Removable Socket-to-bit Adapter • On-board storage of bits • Full metal gearbox

.50 27 SP39630 $

SWAP BETWEEN USING SOCKETS AND BITS QUICKLY Adapter quickly converts to 1/4” squaredrive or 1/4” hex for quick and effortless changes between sockets and bits.

BITS INCLUDED: 7pc • Phillips, Hex, slotted & Torx Bits

SPTOOLS.COM

PLIERS & CUTTERS LOCKING PLIER SET 16 PIECE

T832930

c-CLAMP LOCKING PLIERS MODEL SP32655

SIZE 150mm

SP32656

275mm

SP32657

380mm

SP32658

450mm

119

SWIVEL PAD Swivel Pads on clamp tips for uneven surfaces and odd angles

• Powerful non-slip locking grip • Large, high clearance jaws for greater versatility $35.00 • Cr-Mo steel • Knurled adjuster $55.00 nut PRICE $25.95

• 2x Curved Jaw Locking Pliers - 130mm (5") • 3x Curved Jaw Locking Pliers - 180mm (7") • 5x Curved Jaw Locking Pliers - 225mm (9") • 2x Locking Welding Clamps - 280mm (11") • 2x C-Type Locking Clamps - 280mm (11") • 1x Long Nose Locking Pliers - 160mm (6") • 1x Long Nose Locking Pliers - 225mm (9")

INCLUDES STORAGE WALLET

LOCKING PLIERS LONG NOSE • Non-slip jaws

• Curved Jaw - maximises pressure points for any bolt, nut or locking tool applications • Straight Jaw - Ideal for clamping, holding flat stock, sheet metal etc. in position for cutting, assembling, drilling or welding • Long Nose - Long nose for easy access in extended reach applications • C-Clamps - Swivel pads for gripping on uneven surfaces • Heavy duty hardened jaws for increased gripping power • Easy quick-release lever • Non-slip jaws

HOLE PUNCH PLIER • Revolving punch pliers for producing holes in gasket material or leather products • Punch indexes and locks in position • Comfortable handle for easy grip • Length: 200mm (8”)

• Heavy duty hardened jaws • Chrome Molybdenum Steel (Cr-Mo) • Heavy duty knurled adjuster nut

$65.00

AVAILABLE IN 150 & 225mm

150mm

275mm

380mm

HIGH LEVERAGE LONG NOSE PLIERS

MODEL SIZE PRICE SP32621 150mm (7”) $19 SP32623 225mm ( 9”) $24

450mm

HIGH LEVERAGE BENT NOSE PLIERS

MODEL SIZE PRICE SP32106 150mm (6”) $25

MODEL SIZE PRICE SP32158 200mm $29

• Forged chrome Vanadium (Cr-V) Steel blades • High leverage allows effortless extended use • Precision induction hardened cutting edges • Non-slip cushion comfort grips

Easy quick-release lever with non-slip rubber coating

2.0 / 2.5 / 3.0 / 3.5 / 4.0 / 4.5mm diameter

LONG NOSE PLIERS VDE INSULATED

DIAGONAL CUTTERS VDE INSULATED

• Forged chrome Vanadium (Cr-V) Steel blades for increased strength and durability • Induction hardened cutting edges • Insulated grip handles – 1000V VDE • Ergonomic handles featuring slip guards for added safety

35 SP32109 $

AC 1000v

.50 9 T832440 $

PUNCH HOLE SIZES

$ AC 1000v

SP32209

TEAM PARTNER AND OFFICIAL TOOL SUPPLIER OF

HEAVY DUTY PLIER/CUTTER SET - 3 PIECE

• Combination Pliers - 200mm (8") • Long Nose Pliers - 200mm (8") • Diagonal Cutters - 200mm (8") • Heavy duty forged steel blades • Hardened heat treated jaws • Slip guards for added safety

T832903

CIRCLIP PLIERS SETS - 4 PIECE AVAILABLE IN 175 & 240mm MODEL SP32932

SIZE 175mm (7”)

PRICE $89

SP32933 240mm ( 9.5”) $79

KITS INCLUDE: • Straight Internal Circlip Pliers • Bent Internal Circlip Pliers • Straight External Circlip Pliers • Bent External Circlip Pliers

STAY UP TO DATE WITH THE LATEST NEWS AND EVENTS. FOLLOW US ON

ST R I K I NG - CU T T ING FA ST E N I N G CLUB HAMMER

CLUB HAMMER

• One-piece hardened and tempered carbon steel hammer for extreme strength and durability

• Hardened high quality steel head • Durable nanofiber handle for strength and shock reduction

FIBREGLASS HANDLE

ONE PIECE - ANTIVIBRATION

TAPER PUNCH SET 7 PIECE $

ANTIVIBRATION MODEL SP30333

SIZE 907g/32oz/2lbs

PRICE $25

MODEL SIZE SP30335 1276g/45oz/2.8lbs

RUBBER MALLET

ONE PIECE • Controls striking

• Ideal for applications where softer blows are required • Non marking white rubber striking head, won't mark • Durable nanofiber handle

SIZE 454g/16oz/1lbs

PRICE $13

PRICE $18

DEAD BLOW HAMMER

WHITE - NON MARKING

MODEL SP30275

SET INCLUDES • 1, 2, 3, 4, 5, 6 & 8mm SP30921 • Designed for driving out rivets and pins, free frozen nuts and remove bearings • Chrome Molybdenum (Cr-Mo)

force with minimal rebound from the striking surface

MODEL SP30216

SIZE 454g/16oz/1lbs

SP30232

907g/32oz/2lbs

SP30237 1247g/44oz/2.7lbs SP30248 1361g/48oz/3lbs

PRICE $19.95

PUNCH & CHISEL SET 10 PIECE

SET INCLUDES • Pin punches: 2, 3, 4, 5, 6, 8 & 10mm • Cold chisels: 12, 20 & 24mm • Pin punches - Designed to drive out pins and rivets $ • Cold chisels - Suitable for cutting and scoring steel • Chrome Molybdenum (Cr-Mo) SP30841

$29

$39 $49

TUNGSTEN CARBIDE BURR SETS - 5 PIECE

FILE SET 254mm (10”) 5 PIECE

• Extremely durable • Heavy duty, superior cutting power • Ideal for deburring, carving, grooving, shaping, finishing and filing

• Premium grade steel • High material removal rate • Heat treated hardened steel ensures that teeth stay sharp for longer • Ideal for sharpening, shaping and de-burring metals and polymers • Includes a rugged, compact storage case

AVAILABLE IN STEEL OR ALUMINIUM

55 SP36035

MODEL TYPE SP31380 Steel SP31385 Aluminium

Suitable for: • Aluminium • Metal • PVC

UTILITY KNIFE RETRACTABLE

PRICE $99 $99

7 SP30851 $ .95

• Standard utility knife • Heavy duty design • Lightweight & durable • Multi stop blade positioning • Thumb adjustment • Ergonomic handle with rubber grip

.50 4 T835110 $

AVAILABLE IN METRIC & SAE SETS • Made from Industrial grade extremely sharp high speed steel (HSS) offering the best combination of strength, heat & wear resistance • Drills perfectly round holes in steel, brass, plastic, wood etc. • Two flute design provides faster, smoother and cleaner cuts • Self-starting - No Center punching

SETS INCLUDE • 10 x 20mm - Cylinder • 10 x 20mm - Cylinder - Radius Top • 8mm Dia. - Ball • 10 x 25mm - Tree - Radius Top • 12 x 20mm - Oval

10” MINI HACKSAW

STEP DRILL BIT SETS HIGH SPEED STEEL 3 PIECE

LEVER TYPE RIVETER - 3 JAW - LONG ARM

MODEL SP31398 SP31399

FIXED & FOLDING KNIFE SET FIXED KNIFE

• Blade: 123mm Includes: Nylon pouch

BOTTLE OPENER

HAND RIVETER 2 JAW

NUTSERT GUN

SP69030

.95 9 T869020

22 SP69020

SP69010

SETS RIVET SIZES • Metric: 2.4, 3.2, 4.0 & 4.8mm

SETS RIVET NUTS • Metric: 3, 4, 5 & 6mm

SETS RIVET SIZES • Metric: 3.2, 4.0, 4.8, 6.0 & 6.4mm • SAE: 1/8”, 5/32”, 3/16”, 15/64" & 1/4"

FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT

PRICE $95 $95

FOLDING SINGLE BLADE STOCK KNIFE PLUS BONUS

FOLDING KNIFE • Blade: 90mm

HAND RIVETER 2 JAW

• Heavy duty industrial lever type • 5 interchangeable nozzles included • 3 jaw design provides better performance • Attached collection bottle

SIZE • 6-30mm, 4-20mm & 4-12mm • 3/16”- 1/2”, 1/4”-3/4” & 1/8”-1/2”

Includes Storage pouch with belt clip • Stainless Steel Blade $ .95 • Timber Handle • Blade Length: 93mm • Closed Length: 125mm SP30855 • Overall Length: 218mm

T830860

PIECE Metric SAE

SPTOOLS.COM

MEASURING

MICROMETER TORQUE WRENCHES • Click type signal alerts user when the required Torque is reached. • Reversible ratchet (clock wise torque only). • Scale adjuster: Accurate & easy adjustment. Adjuster lock will hold required setting during use.

REVERSIBLE RATCHET HEAD

• Easy readable scale Convex lens enlarges well defined, bold scale numbering. (N-m scale only) MODEL DRIVE SP35152 1/4” SP35473

RANGE 5-25Nm

LENGTH 323mm

3/4” 150-750Nm 1210mm

PRICE $139

DIGITAL TORQUE WRENCHES STUBBY

• Digital display • Digital torque value readout • +/- 2% Accuracy • Reversible ratchet head - counter clockwise and clockwise torque capable • Peak hold & track mode selectable • Buzzer & LED indicator for pre-settable target torque • Range selection: Nm, ft-lb, in-lb, kg-cm • Quick release mechanism • Auto sleep after about 5 minutes idle MODEL DRIVE RANGE SP35155 1/4” 5-25Nm SP35255 3/8” 4.2-85Nm

$750

DIGITAL DISPLAY

LENGTH 216mm 290mm

PRICE $399 $399

TARGET TORQUE ALARM

VERNIER CALIPERS

DIGITAL TORQUE WRENCHES

VERNIER CALIPERS - 200mm/8"

• Graduation 0.02mm/0.0001” • 4-way measurement - Inside, outside, step & depth • Slider provides smooth, stable and comfortable operation

• Metric & SAE measurement • Upper locking screw • Hardened stainless steel

A DIVISION OF

$20

SP35608

APPRENTICE CASH

DIGITAL VERNIER CALIPERS - 200mm/8"

• Graduation 0.01mm/0.0005” • 4-way measurement - Inside, outside, step & depth • Slider provides smooth, stable and comfortable operation

• Zero calibration switch with automatic on/off • Easy to read LCD screen • Metric & SAE measurement • Thumb lock adjustment. • Hardened stainless steel

139

SP35632

• Click type signal & vibration alerts user when the required torque is reached. • Reversible ratchet (Counter Clockwise & Clockwise Torque Capable). • Digital scale adjuster: Accurate & easy adjustment. • Easily select preferred unit of measurement eg. Nm / ftlb MODEL T835252

DRIVE 3/8"DR

RANGE 27-135Nm

LENGTH 380mm

T835355

1/2"DR

40-200Nm

480mm

PRICE $189 $199

DIAL VERNIER CALIPERS - 150mm/6" 1/2"DR ANGULAR TORQUE GAUGE • 150mm/6” Metric/SAE digital vernier calipers • Measuring face hardened & lapped • Metric & SAE reading on dial • Graduation 0.02mm/0.0001”

• 4-way measurement - Inside, outside, step & depth • Shock proof dial • Thumb lock adjustment. • Hardened stainless steel

SP35621

159

TELESCOPIC GAUGE SET 6 PIECE $

• Set Includes: SP35693 0-25mm, 25-50mm & 50-75mm Micrometers • Graduation: 0.01mm • Carbide measuring face TRADIE • Setting gauge including ratchet stop CA$H • Manufacturing standard: DIN863 • Housed in heavy duty storage case with protective foam tray

$15

26PC FEELER GAUGE SET - TYPE A • Metric & SAE • 0.04 to 0.63mm & .0015” to .025” • Straight blades 85mm long x 13mm wide • Fold out design allows for easy access to all sizes

APPRENTICE CASH

• 360° scale (Dial Pointer) • Support arm included • Allows correct tensioning of fasteners by degrees of torque • This tool is required when manufacturers specify a torque setting using a measurement of degrees after the initial torque is set • Can be used for all torque-to-yield applications (particularly engine head bolts)

3PC OUTSIDE $ MICROMETER SET

.95 29 SP35360

• Range 8-150mm, 5/16’’-6’’ • For quick and accurate SP64066 measurement of bore diameters • Hardened stainless steel automatic self-centring plungers • Locks on any setting by turning knob at the end of the handle • Spring loaded cylinders • Size obtained by measuring over contacts with a micrometer or calliper • Housed in heavy duty storage case with EVA foam inserts

SP64032

ARE YOU AN APPRENTICE?

SIMPLY PURCHASE AN 'APPRENTICE CASH' MARKED PRODUCT AND RECEIVE AN ONLINE VOUCHER TO SPEND AT WWW.SPTOOLS.COM Visit sptools.com for full terms & conditions.

REDEEMING IS QUICK AND EASY. VISIT OUR APPRENTICE PAGE AT SPTOOLS.COM FOR MORE INFORMATION

ENGINE SERVICE FUEL INJECTION PRESSURE TESTER

HEAVY DUTY PETROL COMPRESSION TESTER KIT

• Suits the workshop that handles a wide variety of vehicle’s multipoint, throttle body & CIS system (Continuous Injection Systems) • All adaptors, gauges & hose assemblies feature a quick coupling system for speedy & efficient testing connection • The uniquely designed relief valve relieves the pressure & the fuel safely • No need for wrenches or pipe dope • All housed in a heavy duty blow mould storage case

• Easy reading 2-5” gauge features colour coated quadruple calibrations 0-300psi 21kg/cm, 21bar & 2100kpa • 13” durable rubber hose with 14mm/18mm adapter • 6” Heavy duty stem with universal rubber cone adapter fits all plugs • Pressure relief valve allows repeated on-vehicle tests • All housed in a EVA foam tray and heavy duty blow mould storage case

549 SP66065

SP66024

AUTOMOTIVE DIESEL COMPRESSION TESTER SET

• Tester has a pressure relief valve for releasing air & retesting • A 16-1/2” wire reinforced hydraulic hose has a quick coupler on a swivel for ease of connection • A 2-1/2” gauge with easy to read red and black dial with snap-in lens • Records pressures from 0-1000psi and 0-70 Bar • Adaptors for GM, Ford, Audi, Mercedes Benz, Peugeot, VW & Volvo • All housed in a heavy duty blow mould storage case

$55 TRADIE CA$H

FEELER GAUGE SET 25 PIECE METRIC • 0.04 to 1.00mm • Double ended

Straight blades 75mm long x 13mm wide

285 SP66037

• Check fuel injector signal faults • Simply disconnect injector harness and plug in noid Light • Easy to use and fits a wide variety of injector harnesses

SP71050

DIESEL INJECTOR SYSTEM PRIMING PUMP

45 SP66066 $

Compatible with: GM PFI, FORD TBI, GEO TBI, BOSCH PFI, GM TBI, GM SCPI

FUEL TANK SENDER SPANNER 3 LEG • Used for removal & re-fitting tank sender moulding rings • Range: 75-160mm Diameter • Use with a 24mm Spanner Socket

29 SP64067 $

• Reduces service time • Use where impact guns won’t fit • Loosens and tightens bolts • Recommended for use with impact sockets

SP64030

STRETCH BELT TOOL

• Aids in the quick and easy removal/ installation of stretch fit belts • Installs all Stretch fit belts • Compact, one-piece tool can be used on the front ONE PIECE or back side of MAGNETIC the pulley • Allows for the reuse of stretch fit belts

Straight blades 85mm long x 13mm wide

AIR CONDITIONING & FUEL LINE DISCONNECT SET • Easy clip over design • Simple push under fitting until hose releases

SP64050

89 SP70991 $

VALVE SPRING COMPRESSOR

• Suitable for use on multi valve petrol & diesel engines with deep-seated valves

SIZES INCLUDED: 5/16”, 3/8”, 1/2”, 5/8”, 3/4” & 7/8”

COMPRESSED AIR ADAPTOR • Holds the valves closed whilst spring is compressed • Requires a 90 to 125psi air supply

99 SP66015

159 SP70865

• Produces up to 600 ft/ lbs of torque to loosen stubborn bolts

.50 17 SP64034

Essential for reintroduction of fuel into fuel pump following maintenance, such as fitting of new diesel filter or following drainage of fuel tank

CRANKSHAFT BOLT REMOVAL TOOL

• Marked with equivalent metric sizes

6PC NOID LIGHT KIT

FEELER GAUGE SET 32 PIECE • 0.0015” – 0.035”

• 55-175mm cap. & 165mm throat depth • General use on OHC, OHV & CVH engines

FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT

SP66110 • Spark plug adaptor with M14 and M18 threaded fittings for car and light commercial use

SPTOOLS.COM

ILABLE ALSO AVA TRANSMISSION ADAPTOR KIT SUITS: QUICK FLOW DRILL PUMP

QUICK FLOW

DRILL PUMP KIT

• Kit contains adaptors required to refill many sealed automatic transmissions. • Pressure hose and adaptors have quick connect fittings for easy interchange.

HIGH FLOW RATE 3 LITRES PER MINUTE with a drill speed of 1,200RPM

• Universal adaptor straps to all drill sizes • 3 Litres per minute at 1,200 RPM • Steel gear shafts running in brass bushes • Suitable for long run cycles • Positive Priming • 1/4” hex to 3/8” drive drill adaptor inc. • Quick connect couplers for hose interchange • Also able to run using 3/8”Dr Air Ratchets

Visit sptools.com for full list of supported vehicles

HOUSED IN HEAVY DUTY CASE

NORMALLY $

168

259 SP71196

139

IDEAL FOR TRANSFERRING:

engine oil, automatic transmission, gear oil, power steering fluid, brake fluid, coolant, engine oil pump out, gear oil change, bilge pump out, hydraulic oils, machining coolants etc.

SP71201

NOTE: DRILL NOT INCLUDED PUMP IS NOT COMPATIBLE WITH FLAMMABLE LIQUIDS

DIESEL INJECTION TOOLS DIESEL INJECTION SYSTEM PRIMING PUMP KIT

• Essential for reintroduction of fuel i nto fuel pump following maintenance, such as fitting of new diesel filter or following drainage of fuel tank • Apadtors included: GM, Renault, Fiat, Ford & PSA ( Peugeot, Citroën & Ford)

295 SP66076

DIESEL INJECTOR FLOW TEST KIT

DIESEL INJECTOR SOCKET SET 6 PIECE

• Designed to measure return fuel flow on diesel vehicles up to 8 cylinders fitted with common rail injection system • Identifies, worn, blocked or inoperative injectors quickly & easily • Supplied with measurement tubes for short term tests and measurement bottles for long term, more accurate evaluation • Adaptor set to suit Delphi & Denso Injectors

• Designed for removal, inspection or replacement of injectors • 1/2"Dr sockets • Window in socket allows the wires attached to the sensors to be bypassed, eliminating wire damage • Applications include: Ford, Nissan, Audi, BMW, Mercedes, Land Rover, Seat, Holden, Volvo, VW, Peugeot, LGV, Scania, Alfa Romeo • Chrome Molybdenum • All housed in a heavy duty blow mould storage case

119 SP66068

89 SP66081

$10 APPRENTICE CASH

ENGINE OIL SERVICE OIL FILTER WRENCHES - CHROME FINISH

OIL EVACUATION SYSTEM 6 LITRE $

SP oil filter wrench range covers a vast range of vehicles. These versatile wrenches ensure the installation/removal of oil filters is a low-impact and efficient job around your workshop.

64.5mm x 3/8”DR

32mm x 3/8”DR

88.8mm x 3/8”DR

• Use Torque: 25Nm ± 5Nm

59 SP71110

27 SP71111

SUITS Toyota 4 cylinder (1800cc - 2000cc). Allion, Auris, Corolla Axio,Corolla Fielder, Corolla Rumion, Isis, Ist, Noah, Premio, Prius, Voxy

OIL FILTER WRENCH 3 PRONG

• Compact design great for confined areas • Suits oil filters Ø58 mm to Ø95mm • 3/8’’ Drive

.95 19 SP64001

195

SP64025

SP71115

SUITS SUITS GM Opel/Vauxhall 4 cyl, GM 2.2liter ecotech Suits: Hyundai, Kia, Land Rover, X10XE, X12XE, Y17DT, Y17DTL engines, Range Rover & Jaguar Mercedes HGV’S e.g. OM364 & OM366 engines.

NYLON STRAP OIL FILTER WRENCH • Suits oil filters up to 150mm • 1/2” square drive

29 SP64010 $

OIL FILTER PLIERS • Adjustable serrated jaws lock into position providing maximum grip on "oily" oil filters • Made from heavy duty hardened steel • Comfortable dipped PVC handles for extra grip

32 SP64008 $

Removes oil filters: 52mm(2-18”) to 127mm(5”)

• Fast, no mess fluid removal • Suitable for automotive & industrial applications • Oil extraction: engine, power steering, gear box, auto transmission etc. • Fluids: brake, coolant, hydraulic, cutting, lubricants • Air operated

OIL DRAIN PLUG KEY SET 3/8”DR - 18 PIECE

Helps remove & replace drain plugs in hard to reach locations on differentials, gearboxes & engine sumps

SP20215

• Inhex Keys - Metric: 8, 9, 10, 12, 14 & 17mm • Square keys - Metric: 7, 8, 10, 11, 12, 13 & 14mm • Square keys - SAE: 5/16” & 3/8” • Triangle key: 10mm • Spline key: M16 • SQ key: 10mm

AUTO ELECTRICAL SPARK PLUG BOOT PULLERS

7PC 3/8”DR OXYGEN SENSOR SOCKET SET

SPARK PLUG RAMP GAUGE

SP64044 • Fully insulated tongs designed for removal/ installation of spark plug boot • Reduces risk of electric shock or burns when checking installation of plug leads whilst engine is running • Unique gripping jaw design assists with removal of tight leads

• Quick easy method to set spark plug gap • Suits any size from 0.020 to 0.100 (0.6 - 2.4mm) • Hole in the gauge works as an electrode adjuster

WIRE CRIMPERS & CUTTERS AUTOMATIC WIRE STRIPPERS • 200mm (8”) Automatic wire stripper with crimper features • Strips and cuts cable or wire 24-10 AWG (0.2 to 6.0mm)

• Includes 29mm pressure/ vacuum switch socket, 7/8” vacuum switch socket, 27mm oil pressure sending unit socket, 1” & 1-1/16” oil pressure sending unit socket, long oxygen sensor socket and short oxygen sensor socket • Applications include Mitsubishi, Nissan, GM and the Volkswagon Audi Group

8 SP64041

SP64065

$10

TRADIE CA$H

INSULATED CRIMPING TOOL AND WIRE STRIPPERS

QUICK CHANGE RATCHET CRIMPER KIT 4 PIECE • Ideal for any crimping Job • Kit comes with dies to suit insulated terminals, noninsulated terminals & spark plug connectors. • Dies quickly slide in and slide out with quick release action • Ratchet function • Supplied with storage pouch

SP32282

• 225mm (8.8”) Automatic wire stripper with crimper features • 4.0mm Insulated & Open Barrel • Terminal Crimper • Strips wire to predetermined • Wire cutter: 1.25, 2.0 & 5.5mm length automatically • ISO: M2.6, M3, M3.5, M4, M5, • Crimps insulated & Non • Wire stripper: 0.75, 0.9, 1.25, insulated terminals 2.0, 3.5, 5.5mm

29 SP32278 $

129

SP32287

TERMINAL ADAPTER & CIRCUIT TESTER KIT 6, 12 & 24V - 14 PIECE • Checks high and low voltages (power & ground) on 6,12 & 24V systems • High impedance to protect sensitive electronic sensors, microprocessors, electronic ignition components & air bags KIT INCLUDES • Circuit tester • 14-piece terminal adapters • Banana socket • Testing needle • Alligator clips

89 SP61050

HOUSED IN CLEAR STORAGE CASE

• Two tests in one • Checks 6-12 volt system and spark plug test • Voltage check on secondary or high voltage circuits • White light low voltage • Red light high voltage • Extra long 1200mm lead (1.2m)

15 SP61022 $

• Safely tests standard primary automotive circuits and on-board computer controlled electrical systems without damaging the micro-processor • Checks from 3-15V • Probe adaptor for testing female connectors

REMOTE STARTER SWITCH • Used to bypass ignition switch by connecting starter to solenoid • One-man operation, suitable for turning the engine over for various diagnostic tasks such as compression testing • 1.5m cable

SP61052

DIGITAL DISPLAY CIRCUIT TESTER 5-28V

COMPUTER-SAFE CIRCUIT TESTER 3 -15V

CAR & TRUCK CIRCUIT TESTER 3-48V

Set includes a large number of interchangable terminal adapters and clips to suit most circuit testing jobs around the workshop

DUALITE HI/LOW VOLTAGE TESTER 6-12V

• Tests 3-48 Volt electric circuits • Circuit tester with test lead for either passenger car or trucks • LED display shows polarity • Safe to use with electronics • Extra long lead 850mm (0.8m)

INTERCHANGEABLE TERMINALS

• Digital LCD display for accurate voltage reading • Reads 6, 12 & 24V DC systems • Voltage measurement from 5 – 28V • 3mextendable spring cable • Small testing current < 10mA. • Accuracy: ±(1%+3digits)

25 SP61020 $

SP61016

POCKET CIRCUIT TESTER 6-24V • Tests 6-24v systems • Solid brass body • Test light • Protective screw cap. • 850mm cable • Crocodile clip

18 SP61012 $

Auto electrical tools are used to test, diagnose and repair electrical circuits in automotive 12 & 24 volt electrical systems.

.95

SP Tools provides a range of high quality circuit testers, ignition tests and repair tools to solve any electrical problem a mechanic may find.

T861010

FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT

SPTOOLS.COM

BATTERY TOOLS

SMART BATTERY CHARGERS 8 STAGE 10 AMP SMART CHARGER

1600A JUMP STARTER LI+ COBALT, HIGH DENSITY POWER BANK

• Current Output: 10 Amp • Output Voltage (Nom): 12 Volt • Charge Stages: 8 Stages

NEW

This incredibly compact, high density power bank can supply a huge amount of power in a very short time, to start both 12V petrol or diesel engines up to 10 litres in capacity – It is equally suitable to jump start motor cycles, ride-on mowers, cars and outboard engines etc. Or while its not being used as a jump starter, you can use it to power or charge your low voltage accessories and USB compatible electronics.

PLUS BONUS BATTERY QUICK CONNECT HARNESS WITH CHARGE INDICATOR Makes charging motorcycles, recreational vehicles, marine craft and lawnmowers super easy. simply attach harness to battery and plug in charger when required.

• Peak output 1600A, Rated 800A, Jump start all engines up to 10L Diesel • 12v Port for powering or charging 12v accessories • 2x 5v USB Port for charging mobile phones, tablets & cameras • High power LED flashlight with strobe & SOS flash patterns • Lithium-Cobalt Battery $ • Capacity: 28000mAh • Power: 336Wh • Jump Starter Peak Current: 1600A SP61073

$50

495

APPRENTICE CASH

MORE INFO AT SPTOOLS.COM

DELUXE BATTERY ANALYSER, CHARGING & CRANKING SYSTEM TESTER

139 SP61062

SP61082

5 STAGE 4 AMP SMART CHARGER

8 STAGE 10 AMP SMART CHARGER - MULTI VOLT

$50

TRADIE CA$H

219

• Current Output: 4 Amp • Output Voltage (Nom): 12 Volt • Charge Stages: 5 Stages

399 SP61090

• Current Output: 10 Amp • Output Voltage (Nom): 6, 12 & 24V • Charge Stages: 8 Stages

• Suitable to test all 12V automotive starting batteries, including ordinary lead acid battery, AGM flat plate battery, AGM spiral battery, and Gel battery, etc. • Tests batteries on and off the vehicle • Accurate results in milliseconds • Battery life analysis • Test results based on CA, CCA, BCI, MCA, JIS, SAE, EN, GB, DIn & IEC standards • Vehicle cranking system test • Vehicle charging system test • Digitally store the test results - printing capability

PLUS BONUS

SP61076

BATTERY QUICK CONNECT HARNESS

HAND-HELD REFRACTORMETER

• Suitable for ethylene & propylene glycol coolants • Ethylene Glycol: -60°C- 0°C • Propylene Glycol: -50°C- 0°C • Battery Fluid: 1.15 – 1.30 specific gravity • Automatic temp. compensation • Easy to read scale

129

SP61005

DIAGNOSTIC TOOLS CAN OBDII/EOBD/JOBD SCANNER CODE READER

DIGITAL AUTOMOTIVE MULTIMETER

Reads & clears generic & manufacturer specific diagnostic trouble codes (DTC’s) & turns off check engine light.

• RPM measurement for 2–10 cylinder automotive engines using the inductive pick-up • 14 functions - Check SPTOOLS.COM for a full list of features and applications

199

SP61155 • Works with all 1996 and newer vehicles that are JOBD/ OBDII/ EOBD compliant (Including CAN). • Supports multiple trouble code requests: Generic codes, pending codes and manufacturer specific codes.

179 SP62011

LIST OF COMPATABLE VEHICLES AND MORE INFO AT WWW.SPTOOLS.COM

DIGITAL AUTOMOTIVE CURRENT TESTERS

DIGITAL TACHOMETER

• Tests Circuit Current up to 30Amps • Design allows for easy connection into fuse Sockets

AVAILABLE IN MAXI & MINI BLADE

TRADIE CA$H

• Laser target • LCD display with backlight • Range: 100-30000rpm, 1.7-500rps • Protective cover & carrying case • Auto power off • Accuracy: +/-0.1%

159

MODEL BLADE SIZE PRICE SP62008 30A Maxi $45 SP62009 30A Mini $45

SP62032

SP TOOLS HAS TRADIES COVERED SIMPLY PURCHASE A 'TRADIE CASH' MARKED PRODUCT AND RECEIVE AN ONLINE VOUCHER TO SPEND AT WWW.SPTOOLS.COM Visit sptools.com for full terms & conditions.

PROFESSIONAL TIMING LIGHT

249 SP62042

• Four functions, digital readout & easy to read backlit LCD • Tachometer: 249 to 9,990RPM (+/- 1% Accuracy) • Advance degrees (2 & 4 cycle DIS and Conventional): 0° to 90° (+/-.5° Accuracy) • Dwell: 0° to 180° / 2-12 cylinders (+/-1% Accuracy) • Voltage: 10 to 16 volts DC (+/- 1% Accuracy)

$25

APPRENTICE CASH

INFRARED LASER GUIDED THERMOMETER • Dual laser technology (twin dots) • Rapid detection function • Automatic data hold • OC/OF switch • Emissivity digitally adjustable from 0.10 to 1.0 • Max temperature display • -50°C/550°C range (-58°F/1022°F) • Backlight LCD displays resolution 0.1°C(0.1°F) $ • Set high & low alarms

179

SP62020

REDEEMING IS QUICK AND EASY. VISIT OUR APPRENTICE PAGE AT SPTOOLS.COM FOR MORE INFORMATION

PULLERS MASTER PULLER SET • Ideal for pulling harmonic balancers, steering wheels, vibration dampers, crankshaft pullers and gears • Capable of handling almost every 2 or 3 way bolt pull possible on almost every car, pickup, SUV and small engine

NEW

KIT INCLUDES • Two/three way yoke $ • 4pc tips • Metric & SAE bolt sets • 2pc centre screw for puller SP67038

129

GEAR & BEARING PULLER SET - 14 PIECE • Aids in the removal of pulleys, gears and steering wheels • Hardened and tempered, precision machined steel bolts • Drop-forged, heat treated steel attachments • Chrome plated and black oxide finishes • Separates ball bearings • Bearing Separators 9/32" - 3" • Bolts for bearing separators with nuts and washers 5.5" - M12 Thread • 6" Pawls 3/8 inch - M16 thread with tuts 6.75" • Connecting bolts 3/8" - M16 Thread / 5 x 16" M18 thread with nuts • 5.5" push rod

$10

BEARING SEPARATORS INDIVIDUAL • Designed to remove bearings & gears where access is available behind the item • Can be used in conjunction with hydraulic pullers, twin pull mechanical pullers or sliding beam applications • Drop-forged hardened alloy steel

TRADIE CA$H

MODEL SIZE SP67061 10-30mm

SP67050

SP67063 50-75mm

PRICE $29

$59

THREAD REPAIR 59

STUD REMOVAL $ & INSTALLATION SP31251 TOOL

• Capacity: 10-19mm (3/8”- 3/4”) • Suitable for the removal and installation of various sizes of studs • Cam rotates to grip onto the stud for quick and easy use • Use with 1/2”sq drive ratchet wrench

NUT SPLITTERS • Splits seized bolts and/or over tightened bolts without damaging the thread • Chrome molybdenum steel blades with forged high carbon steel grips

MODEL SIZE SP31211 9-12mm SP31212 12-16mm SP31213 12-22mm

PRICE $23 $26 $35

SP31214 22-27mm $39.95

TAP & DIE SET 32PC METRIC • Ideal for chasing out damaged threads and the removal of nicks/burrs without undercutting good threads • Cuts threads and bores taps quickly • Designed specifically for the automotive mechanic • Covers 6-18mm with common thread pitch sizes

$20

179 SP31100

APPRENTICE CASH

COOLING SERVICE COOLING SYSTEM FLUSHING GUN

• Multi-purpose cleaning gun uses a combination of high pressure compressed air and water to quickly clean dirt, scale etc. from the cooling system • Multi-step nozzle suits most radiator and heater hose sizes

65 SP70801 $

COOLING SYSTEM PRESSURE TEST KIT 21 PIECE • Thumb-operated relief valve for quick and easy pressure release and self-locking quickdisconnecting components • This kit is designed to find internal & external cooling system leaks • Includes a selection of radiator cap adaptors, header tank adaptors and radiator cap tester adaptors to test all aspects of the cooling system • Includes a heavy duty pump with test range 0 - 2.5bar.

285 SP70750

FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT

$20

HOSE/PIPE CUTTERS PLASTIC AND RUBBER • 75mm pipe cutter 75mm

• Compound ratchet action • Cut PVC pipe, vacuum hoses, heater hoses etc.

SP63046

TRADIE CA$H

SPTOOLS.COM

STEERING & SUSPENSION UNIVERSAL KNUCKLE SPREADERS • Used to spread the steering knuckle to enable the removal and refitting of shock absorbers without the risk of damage to the knuckle • Vehicles include: Audi, BMW, Citroën, VW, Ford, Skoda, Seat, Renault, Peugeot and most Japanese vehicles.

MASTER KIT SINGLE & TWIN

SP70972

ALSO AVAILABLE IN A SINGLE KIT

SINGLE

SP70970

STEERING WHEEL PULLER SET HEAVY DUTY - 7 PIECE • For use on GM Vauxhall/Opal & Ford vehicles KIT INCLUDES: • Two-Leg Puller • 2x Thrust Caps • 2x 87mm Legs • Yolk • 2x 135mm Legs • Thrust bolt

HEAVY DUTY EAR TYPE CLIP PLIERS • Each handle features a 1/2”Sq drive for use with a torque wrench & breaker bar • Suitable for all ear-type CVJ boot clips

45 SP67165 $

2PC MACPHERSON STRUT SPRING COMPRESSOR SET

49 SP67040 $

• Compresses the external coil springs on conventional MacPherson style struts to replace shock absorbers, spring sets and repair bent struts and damaged spindles • Works on and off your car • Acme thread • Detent pins included

PITMAN ARM PULLER • Removal of pitman and idler arms on vehicles fitted with linkage steering systems • Ideal for passenger vehicles and light commercials

BALL JOINT EXTRACTOR SET 5 PIECE

99 SP67027 $

• Three forks & two handles • 24mm Ball-joint separator • 28.5mm Pitman-arm wedge • 18mm Tie-rod spreader • 8” manual knurled grip handle • 8” air-tool compatible handle with chuck collar

UNIVERSAL BALL JOINT SEPERATOR • 18-24mm jaw capacity • Adjustable from 30-50mm • This tool is used to separate the ball joint from the spindle support arm

MASTER PRESS & PULL SLEEVE KIT - 28 PIECE

SP67024

BEARING PACKER (CUP STYLE) • No air line or grease gun required • Packs 50-60 bearings without refilling • Transparent cup allows grease level check • Works on bearings up to 90mm O.D

SP67030 • High quality alloy steel for durability and performance • 1-15/16” Opening, 2-1/2” Pull • 33mm Opening, 63mm Pull

75 SP67023 $

SELF-CONTAINED •

SP30888 TEAM PARTNER AND OFFICIAL TOOL SUPPLIER OF

• Designed for the installation and removal of silent bearings, hydro bearings, bushings, ball bearings, simmer rings, shaft seals, rubber bearings etc. • Universal applications: Suitable for domestic & import vehicles, passenger cars, trucks, SUV's, 4WD and more • Commercial quality KIT INCLUDES: • PRESS SLEEVES OF VARIOUS SIZES: Inside diameter: 34, to 72mm & Outside diameter: 44 to 82mm (even sizes only) • 4x pulling spindles with nuts and thrust bearings: M10, M12, M14 & M16 • 4x TOP PLATE DISCS OF VARIOUS SIZES

345 SP67310

BRAKE & CLUTCH

NEW BRAKE GAUGE SET 8 PIECE • Brake gauges give an accurate measurement of the amount of brake lining is left without guess work • Made from 20 gauge sheet metal with durable powdercoat finish

EASY COLOUR CODED IDENTIFICATION COLOUR SIZES Red 2 & 3mm Yellow

4, 5 & 6mm

Replacement recommended

Green

8, 10 & 12mm

Brakes are in good and safe working order

PIPE CUTTER

MANUAL BRAKE BLEEDER KIT

SP70858

DISC BRAKE DIGITAL CALIPERS

• For removal & replacement of brake shoe retaining washers • Head designed to fit most vehicles • Knurled outer cone grip • Ergonomic plastic handle

• 0-100/0.4” Disc brake digital calipers • Double point jaw • Power On/Off

SP63004

VACUUM TEST & BRAKE BLEEDING KIT • The complete kit for all vacuum testing and brake bleeding requirements • Hand held vacuum pump – compact design, one handed operation • Allows fast efficient static testing and monitoring • Safely transfers fluids • Ergonomic handle design • Regulated vacuum relief valve • Allows one man brake bleeding

PLUS BONUS TUBE CUTTER • 3-16mm

39 SP63042

ONE PERSON OPERATION

179

SP35649

SP63010

3PC 75° OFFSET BRAKE BLEEDER RING SPANNER SET • Metric & SAE Spanners • Flat Drive Technology • Sizes Included: 8x10mm, 9x11mm & 3/8x7/16”

BRAKE CYLINDER HONE - 2 ARM

19 TO 63mm

• Versatile hone for 19mm - 63mm diameter cylinders • 28mm fitted stones Medium 220 grit • Flexible shaft

SP63035

• Graduation 0.01mm/0.0005”

• Bends: 3/16”, 1/4”, 5/16”, 3/8”, 5, 6, 8 & 10mm

• Bends tube without kinking or flattening

BRAKE SPRING WASHER TOOL

SP63006

DELUXE TUBE BENDER PLIERS

• Tube diameter cutting range: 3 to 35mm (1/8” to 1-3/8”) • Use to cut tubing made of hard and soft copper, aluminium, brass, thin wall steel and stainless steel lines • Die-cast cutter body with SKS wheel cutter and SK2 fold-away pipe de-burring tool

SET INCLUDES BRAKE FLUID RESERVIOIR RE-FILLER & BRAKE BLEED BOTTLE BRAKE FLUID RESERVOIR RE-FILLER - 600ml • Automatically refills brake fluid reservoir during brake bleeding • Retaining clip provides positive clamping to all master cylinder reservoir types • Height adjustment maintains correct fluid level; prevents running brake fluid reservoir dry • On-off tap BRAKE BLEED BOTTLE • Universal rubber fitting holds securely on brake bleed screw • Large collection bottle prevents overfilling • Internal submersed tube prevents $ air drawback during brake bleeding • Hanging hook for hands free use

DEFINITION Pads must be replaced

SP10423

INCLUDES STORAGE POUCH

LINE CLAMP SETS

• Adjustable tension, controlled spring action and spread control limiter • Knurled nut controls tension

HI-VIS

• Smooth rounded edges on jaws will not damage internal hose linings • Light weight, non conductive, highly visible material • Jaw design eliminates damage to hoses

3PC MULTI SIZE SET

4PC SMALL SIZE SET

HOUSED IN HEAVY DUTY CASE

139 SP79995

• Includes sizes to suit flexible brake and fuel lines and large hoses from 3mm to 57mm

FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT

45 SP70713 $

• Seals flexible brake and fuel Lines from 3mm to 8mm

SPTOOLS.COM

SP70719

WORKSHOP ADJUSTABLE HEAD REST

SUMO SERIES GARAGE CREEPER • 20% wider - Ideal for bigger built/taller blokes • Heavy duty steel frame • 6 heavy duty castors • Wide padded body & head rest • Capacity: 150kg

MECHANICS CREEPER WITH ADJUSTABLE HEAD REST • Heavy duty steel frame • 4 heavy duty castors • Padded body & head rest • Adjustable head rest • 1030mm x 440mm

149 SPR-48

120 SPR-46

$15

APPRENTICE CASH

HEAVY DUTY STOOL WITH STORAGE (PNEUMATIC)

MECHANICS MAGNETIC FENDER/ MUDGUARD PROTECTORS

HEAVY DUTY SWIVEL STOOL (PNEUMATIC)

159 SPR-55

• Adjusts from 420 to 533mm • 430mm reinforced steel base with 5 heavy duty swivel castors • 3 Section tray base with removable magnetic pad • High density foam padded leather seat • Chrome plated heavy duty steel frame

• Pneumatic seat adjusts from 660 to 787mm • High density foam padded leather seat • Chrome plated heavy duty steel frame • Non-slip rubber feet

159 SPR-60

Note: Tools not included

SANDBLASTING GUN 1 LITRE

75 SP65010 $

AVAILABLE IN BLUE OR GREEN MODEL SPR-22BBL

COLOUR Blue

SPR-22BGR

Green

WORKSHOP CABLE TIES

SURGE PROTECTED POWER BOARD -

SP HIGH-FEEL 0.5mm GENERAL PURPOSE GLOVES

Nylon 66,94V-2

• 4 Individually powered outlets • Overload protection • Surge protection

• Stretch Spandex fabric ensures a comfortable fit • Thin 5.0 wall re-inforced non-slip palm grip for better feel • High quality velcro for firm wrist grip • Machine washable

4 OUTLETS & 4 USB PORTS

BLACK NYLON

MODEL SIZE QTY SP78100 2.5 x 100mm 100

Adjustable nozzle assures that the amount of sand can be regulated as required

• Vinyl with soft inner to protect car paintwork • Contains hidden sleeved magnets to hold cover firmly in position • Resistant to oil, grease & water • 810mm (w) x 645mm (H)

SP78101 3.6 x 150mm 100 SP78102 4.8 x 200mm 100 SP78104 7.6 x 260mm

PRICE $2.20

BUILT IN USB PORTS

$4.40 $6.50

50 $19.95

• UV Treated • Flame Retardant • Heat Resistant

49 SP69998 $

3 DRAWER ROLLER SEAT WITH CAN HOLDERS • Heavy Duty Frame • High Density Foam Padded Seat • Ball Bearing Slide Drawers • Easy Access Spray Can Holder • 3x Can Holder Slots • Swivel Castors DIMENSIONS: • Unit: 370 x 400 x 367mm • Drawers (3): 190 x 300 x 40mm

99 T8R58

MODEL SP68810

SIZE Large

SP68811 X-Large

PRICE $35

$59

TOUCH SCREEN COMPATIBLE INDEX FINGER

$35

WET & DRY -VACUUM CLEANER/BLOWER 1400W - 40L COMMERCIAL

• 1400W high power motor • Vacuum: 19kpa • Air Flow: 57L/s • 40L stainless steel container • Wet and dry vacuum cleaner • Easily converts from vacuum to power blower • Built-in easy drainage system • Swivel castors and large rear wheels provide ease of movement in any direction • 4.8m power cord with cord hook • Removable steel handle for easy storage • Filtered intake and outlet exhaust

PLUS BONUS 3X DISPOSABLE FILTER BAGS VALUED AT $25

You can now simply purchase your SP products online at sptools.com & pick them up from your local SP Destination Store.

PRICE $59

VACUUM

BLOWER

WET

DRY

249 SP040

SHOP ONLINE OR ON YOUR SMART PHONE

AUTO SPECIALTY ROLLING HEAD PRY BARS • High quality Chrome Vanadium Steel (Cr-V) steel for industrial strength & durability • 90° rolling head for greater leverage when prying objects apart and ideal for lifting and pivoting heavy machinery • Gradual taper with a self-centering pointed tip for ease of alignment and adjusting • Industrial black finish for corrosion resistance

GO-THROUGH PRY BAR SET - 4 PIECE

AVAILABLE IN 2 SIZES MODEL SP33821

SIZE 150mm (6")

SP33822 300mm (12")

PRICE $14

• High quality heat treated Chrome Molybdenum steel blades • Square shanked with angled heads • Go-Thru blade with striking cap allows hitting the bar with a hammer without damage to the handle • Large, rubber grip handles • Ideal for prying cylinder heads, manifolds, gearbox components etc.

$19

SP30839

• Both tools facilitate easy removal & installation of O-rings & seals, scribing, carving & part placement • Complete with 4 different end configurations with hardened scriber points

2PC HOSE REMOVER PICK SET

4PC MINI HOOK & PICK SET

2PC O-RING & HOOK SCRIBE SET

• Combination hook, 90 degree pick, straight pick & hook pick • Slimline

24 SP30844 $

SP30843

Combination pick and hook pick 90° pick and straight pick

• Shaft: 155mm • Length: 275mm

PICK-UP TOOLS • Strong & lightweight stainless steel shaft • PVC comfortable cushion handle • Pocket clip

BENDABLE MAGNETIC PICK-UP TOOL

SP30920 • Easily access confined areas • Magnetic pick up tool makes it easy to retrieve small hard to reach objects • Set housed in storage case

SP31490

9 SP31501 MODEL MIRROR LENGTH PRICE SP31502 1Kg Pick-up Extends 185 - 840mm $20

TELESCOPIC MAGNETIC PEN PICK-UP TOOL WITH CLEANING NEEDLE

• Pen type • Magnetic telescope will hold 1kg • Needle will hold 500g • Extends 130 to 620mm

9 SP31507

INSPECTION MIRROR & PICK-UP TOOL SET 4 PIECE

• 0.7kg magnetic pick-up tool • Flexible alloy shaft - bends and holds any position • Overall Length - 860mm

• Designed for cutting thin walled steel and copper tubing • Suitable for cutting exhaust pipe with diameters from 20-75mm

• Unique tip easily fits between hose & fitting to break stubborn hoses • Ideal for radiator hoses, heater hoses, etc.

TELESCOPIC MAGNETIC PICK-UP TOOLS

EXTENDABLE

SET INCLUDES: • 6x200mm (1/4”x8”) • 9x300mm (3/8”x12”) • 11x460mm (7/16”x18”) • 11x610mm (7/16”x24”)

EXHAUST PIPE & TUBING CUTTER

19 SP30808

STRIKING CAP Loosen Stubborn parts

TELESCOPIC ROUND INSPECTION MIRRORS

360° SWIVEL SWIVEL HEAD ON ALL MODELS

4 JAW PICK-UP TOOL 610mm

MODEL MIRROR LENGTH PRICE SP31402 57mm Dia. Extends 250 - 930mm $19 SP31403 82mm Dia. Extends 280 - 800mm $19

WINDSCREEN COLD KNIFE • Durable Aluminium Handle • Heavy Duty Steel Knife • Replaceable Blades • Knurled Handle for Additional Grip

SP31506

EXTENDABLE

• Strong & lightweight stainless steel shaft • PVC comfortable cushion handle

FLEXIBLE SHAFT

• Flexible Shaft - 610mm • Easy retrieval of small parts • Magnetic head • 4 Jaw

Interchangeable magnetic heads

29 SP30829

REPLACEMENT BLADES AVAILABLE

WINDSCREEN COLD KNIFE BLADES

• Hardened then honed blade allows fast separation of screen from bond • Able to be re-sharpened

CLEANING NEEDLE

FLEXIBLE SHAFT

FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT

SP33829

SPTOOLS.COM

PANEL & TRIM PANEL BEATING SET - 7 PIECE The perfect panel beating set for any workshop, featuring the most commonly used dollies & hammers - you’ll be well equipped to handle the vast majority of panel repairs.

NEW

• Genuine hickory handles • Forged from high quality carbon steel • Heat treated for increased durability • Housed in a high quality EVA foam storage solution • Heavy duty X-Case made to withstand the conditions of a busy workshop

165 SP30202

SET INCLUDES:

PLUS BONUS SEAM SPLITTER WITH PROTECTIVE HAND GAURD

$15 TRADIE CA$H

TRIM REMOVAL SET - 6PC TRIM REMOVAL SET - 4PC

2PC DOOR UPHOLSTERY CLIP REMOVER SET

29 SP30863

.95 9 T830867 $

• Removes door panels, trim strips, dashboard, interior etc.

MINI BRUSH SET - 3PC

• Non-marring polymer.

• Removes most door and body trim fasteners • Set includes: U-Blade & V-Blade clip removers

• Designed for the removal of hole plugs, window, door, sunroof & rubber joints, mirrors, windshield wipers, metal/plastic bolts and throttles, etc

27 SP30867 $

• Set includes nylon, stainless steel & brass bristled brushes • Ideal for heavy duty cleaning • 3 rows of bristles on each brush & 5 hole tips • Ergonomic polypropylene handles

$ .50 SP30890

TYRE SERVICE

TYRE PRESSURE GAUGE - DIAL

PROFESSIONAL TYRE GAUGE

• L shape design allows for increased flexibility when connecting to difficult to access tyre valves • The air chuck can rotate 360° and is paired with a soft rubber tube to increase the flexibility during use

Accuracy: ±1psi/0.1bar

• 1x Pick & Finish Hammer • 1x Standard Bumping Hammer • 1x Straight Pein & Finishing Hammer • 1x Double End Hand Dolly • 1x Curved Dolly • 1x Utility Dolly • 1x Heel Dolly

SP65508

TRADIE CA$H

• Pressure Range: 0-60 PSI and 400 kpa with swivel angle tip and 600mm hose • Accuracy: +/- 1 PSI

PENCIL TYPE TYRE GAUGE • Metal head and body - 4 sided plastic gauge • 5-50PSI

SP65505

SP65521

CLIP-ON AIR HOSE CHUCKS • High quality solid brass • Open 1/4 BSP

SP65531

SP HAS TRADIES COVERED

SIMPLY PURCHASE SPECIALLY MARKED PRODUCTS FROM ONE OF OUR SP DEALERS NATION WIDE. YOU WILL THEN BE ELIGIBLE TO RECEIVE THE SP TRADIE CASH AMOUNT ASSOCIATED WITH THAT PRODUCT, IN AN ONLINE VOUCHER TO USE TOWARDS YOUR NEXT PURCHASE. Visit sptools.com for full terms & conditions.

BANK UP SOME TRADIE CASH AND GET BONUS TOOLS OF YOUR CHOICE. ON US.

REDEMPTION IS QUICK AND EASY. HEAD OVER TO OUR TRAIE CASH PAGE AT SPTOOLS.COM TO REDEEM TODAY!

GREASE GUNS PNEUMATIC SINGLE SHOT GREASE GUN

PNEUMATIC SINGLE SHOT OR CONTINUOUS GREASE GUN

109 SP65110

MAY RELEASE

SP65111

HEAVY DUTY COUPLER

RIGHT ANGLE COUPLER

• 3 hardened jaws • 2” long coupler tapped for 1/8” pipe threads

• Reach out-of-theway zerk fittings such as those on ball joints

SP65132 • Fits standard grease guns: 1-5/8” long, 1/8” NPT

AIR INPUT PRESSURE: 60~120PSI • Single Shot Mode: Max - 4800PSI • Continuous Mode: Max - 2500PSI • Capacity: Cartridge-450cc, Bulk-500cc

119

• Greasing flow: Up to 150cc/min • 40:1 ratio air motor • 3-way loading: Bulk, filler pump or 450cc grease cartridge • Heavy duty coupler for better grip and longer service life • 6’’ curved pipe with coupler & 9” flexible hose with coupler

QUICK-RELEASE SWIVEL GREASE COUPLER

EXTRA LONG HOSE

CONTINUOUS MODE

• Swivels in full 360° circle and locks in place • 45° angle for easy access to most grease fittings • 1/8” NPT female inlet • For use with air operated equipment • Working pressure: 4,500psi

IN-LINE SWIVEL JOINT

• 20” flexible hose with heavy duty quick release coupler and in-line swivel joint eliminating awkward twisting • Heavy duty cast aluminum body • Heavy duty super grip coupler, coupler includes ball check • Bleeder valve for purging unwanted air • 2-way loading: Bulk or 450cc grease cartridge • Coupler and hose locks to pump for easy clean storage

• 40:1 ratio air motor • Heavy duty cast fiber composite body • 3-way loading: bulk, filler pump or 450cc grease cartridge • Non-slip finish for better grip. • Air inlet: 1/4” • Hose size: 3/8” I.D. • 6” curved pipe with heavy duty coupler & 9” flexible hose with coupler

• Working pressure: 8000psi

NEW

139

10 SP65131

VARIABLE STROKE PISTOL GRIP GREASE GUN

LOCK TECH Locks coupler to grease gun

NON-SLIP GRIP

QUICK-RELEASE COUPLER

SP65108 •Air inlet: 1/4” • Hose size: 3/8” I.D. • Max pressure: 8000PSI

QUICK-RELEASE GREASE COUPLER • Designed for use with air, battery & hand grease guns • Heavy-duty construction with stands higher pressure • Four hardend jaws • Pressure: 10,000psi

QUICK-RELEASE LONG GREASE COUPLER • Designed for use with air $ powered, battery powered

and hand grease guns • Heavy-duty construction SP65137 withstands higher pressure • Four hardened jaws • 130mm long coupler tapped for 1/8” pipe threads • Burst Pressure 15,000psi • Working pressure 10,000psi

$ 14 37 SP65135 SP65136 $

FLUID TRANSFER VERSATILE WORKSHOP PUMP SET

LEVER ACTION 200LT DRUM PUMP

• Flow: 400ml per stroke • Mounting: 2 inch MNPT Bung Adapter • Inlet: 7/8 inch O.D. • Outlet: 3/4 inch Height-Angle & Normal Curved • Maximum Fluid Viscosity: 4000 SSU • Self-priming unit • Used for dispensing or transferring non-corrosive and petroleum based fluids, such as diesel, kerosene, transmission fluid, machine oil, lube oil, fuel oil, anti-freeze, etc. • Ideal for heavy-duty use in industrial, automotive and agricultural applications

20L DRUM PUMP Ideal for transferring non-corrosive fluids of light to medium viscosity, such as engine oil, gear oil, machine oil transmission fluid, automotive additives, etc.

1L MULTI-PURPOSE PUMP Ideal for topping up difficult to access oiling points on motor vehicles, lawn mowers, chain saws, outboard and two stroke motors, and other odd jobs around the workshop and home

76 SP65999 $

TELESCOPIC SUCTION PIPE

NOTE: Not for use with organic solvents, alkalis, acids & waterbased fluids

SPRING GEAR OIL PUMPS • Designed to fit 20L or 60L drum and is ideal for transferring noncorrosive fluids of medium to heavy viscosity, such as engine oil, gear oil, transmission fluid, automotive additives, machine oil and lubricant • Spring operated pump and unique swivelling pump head assembly allows the hose to follow the operator • Gun holder to ensure the extra oil flows back into the pail to prevent spills and accidents • Robust zinc pump head and steel pump body assembly ensure long working life

OIL SUCTION PUMP

AVAILABLE IN 60 & 20 LITRE 20 LITRE DRUM

60 LITRE DRUM

• Flow: 300 ml / stroke • Suction tube length: 325mm • Inlet: 45mm O.D. • Outlet: 17mm O.D with 1370mmL • PVC hose & controllable oil gun • Max. viscosity: 5,000 SSU

• Flow: 500 ml / stroke • Suction tube length: 535mm • Inlet: 48mm O.D. • Outlet: 17mm O.D with 1370mmL • PVC hose & controllable oil gun • Max. viscosity: 5,000 SSU

MODEL SP65160

SIZE 20L

FLOW RATE 300ml/Stroke

PRICE $99

SP65162

60L

500ml/Stroke

$129

• Perfect for removing or replacing oil in: engines, transmissions, differentials, gearbox sumps & crankcases • 10’’ Flexible hose $ • 500ml capacity • No priming necessary

SP65120

SP65170

GENERATORS POWERED BY

INVERTER GENERATORS Able to run caravan air conditioning units

SUPER QUIET POWERFUL, COMPACT AND WITH A SUPER QUIET RUNNING NOISE, THE RANGE OF SP INVERTER GENERATORS ARE IDEAL FOR ALL CAMPING AND LEISURE ACTIVITIES.

SOUND LEVEL GUIDE

SPGi3300E

SPGi3000

Ideal for all camping & leisure activities, compared to similar products, the SPGi3300E is a powerful super quiet inverter generator with the best power, size to weight ratio on the market. Built around the reliable Torini race tested 7Hp engine and intelligent power supply, it is well suited for recreational use with air conditioners, refrigerators, microwave ovens, coffee machines & entertainment appliances. The microprocessor controlled inverter produces a high precision, pure sine wave power output, perfect for laptops, computers, mobile phones & tablets making it ideal for back up power at home during power outages & storm emergencies. Don’t risk your electronic devices on anything less.

INDUSTRIAL GENERATORS

SOUND SOURCES EXAMPLE & DISTANCE

SOUND PRESSURE

Jet Aircraft, 50m away

140 dB

Threshold of discomfort

120 dB

Chainsaw, 1m away

110 dB

Night club, 1m from speaker

100 dB

Diesel Truck, 10m away

90 dB

Kerbside of busy road, 5m away

80 dB

Vacuum Cleaner, 1m away

70 dB

Conversational speech, 1m

60 dB

Average home

50 dB

INVERTER GENERATOR FEATURES:

• Torini 4 Stroke Engine • 3 in 1 Multi-function Control • Engine Smart Control (ESC) • 32 bit Inverter Core MODEL

WATTS

SPGi2000

1800w 3.2Hp

SPGi3000

2500w 4.3Hp

SPGi3300E 3300w

• 12 Volt Outlet • Low Running Noise: Max 65dB • Parallel Connection Capable

TANK START OUTLETS

7Hp

PRICE

Pull

1 (15A)

$999

Pull

2 (15A)

$1395

10L

Electric

2 (15A)

Quiet library

40 dB

Quiet bedroom at night

30 dB

Background in TV studio

20 dB

Rustling leaves in the distance

10 dB

Hearing threshold

0 dB

BETWEEN 50 & 61dB Equivalent to the average sound at home and having a conversation INVERTER GENERATORS SOUND LEVEL

MEETS EPA, PROPOSED AUSTRALIAN EMISSIONS & STRICT CALIFORNIAN POLLUTION STANDARDS

$1795

CONSTRUCTION GENERATORS

DIESEL GENERATOR

$280

DIESEL POWERED

TRADIE CA$H

GENERATOR FEATURES & MODELS

• Sine Wave Technology • Automatic Voltage Regulator • RCD - Residual Current Circuit Breaker • Torini 4 Stroke Engine • IP66 Rated Power Outlet • Large Capacity Tanks • Large Volume Mufflers • 12 Volt Outlet • Wheel Kit Included

• Sine Wave Technology • Automatic Voltage Regulator • Torini 4 Stroke Engine • Large Capacity Tanks • Large Volume Mufflers • 12 Volt Outlet

MODEL

KVA

START

WHEEL KIT

OUTLETS

SPG2800 16.5hp 2.8kva

Pull

Not Incl.

2x (15A)

SPG4000

7hp

Pull

Not Incl.

2x (15A)

SPG6800

13hp

6.8kva Electric

Included

SPG8100E 15hp

8.1kva Electric

Included

4kva

APPRENTICE CASH

GENERATOR FEATURES & SPECS

RESIDUAL CURRENT DEVICE

PRICE $629

$819

3x (15A)

$1295

MODEL SPGC8100E

HP 15hp

KVA 8.1kva

START Electric

OUTLETS 2x (15A)

PRICE $2139

3x (15A)

$1825

SPGC12000E

20hp

12kva

Electric

3x (15A)

$4500

ARE YOU AN APPRENTICE?

SIMPLY PURCHASE AN 'APPRENTICE CASH' MARKED PRODUCT AND RECEIVE AN ONLINE VOUCHER TO SPEND AT WWW.SPTOOLS.COM Visit sptools.com for full terms & conditions.

• Sine Wave Technology • Automatic Voltage Regulator • RCD - Residual Current Circuit Breaker • Torini 4 Stroke Diesel Engine • 2 x 15amp Power Outlets IP66 Rated • Electric Start • Automatic Decompression • Low Oil Alert • Pressure Lubrication System • Easy Access Oil Filter • Battery Included

SPECIFICATIONS: • HP: 13Hp • KVA: 6.6KVA • Max Watts: 5500w • Rated Watts: 5000w • Power Outlets: 2 (15amp) • Power: 50Hz/240v • DB: 111dB • Tank Capacity: 14.5L • Starting System: Electric

2800 SPGD6800E

RESIDUAL CURRENT DEVICE

REDEEMING IS QUICK AND EASY. VISIT OUR APPRENTICE PAGE AT SPTOOLS.COM FOR MORE INFORMATION

AIR TOOLS 3/4”DR IMPACT WRENCH

MAY RELEASE

1/2”DR IMPACT WRENCH

FEATURING OUR BRAND NEW 8 VANE MOTOR

• Bolt busting torque: 1140Nm

FAST & POWERFUL

199 SP-1146

1/2”DR IMPACT WRENCH

• Bolt Busting Torque: 850Nm

319 SP-1140EX

INCREASED BOLT BUSTING TORQUE BOLT BUSTING TORQUE: 1900NM

PIN TYPE HAMMER

589 SP-1157

HIGH PERFORMANCE MOTORSPORT MOTOR TWIN DOG HAMMER

MINI RATCHET WRENCHES

COMPACT DESIGN

RUBBER GRIP HANDLES

3/8”DR LONG NECK RATCHET WRENCH

RATCHET WRENCHES TRADE FAVOURITE FOR MANY YEARS

LONG NECK Access extremely difficult to reach areas

100mm • Max Torque: 40 ft-lbs • Length: 170mm MODEL DRIVE SP-1760A 1/4" SP-1762 3/8"

195 SP-1764

PRICE $169 $169

1/4”DR MINI DIE GRINDER FRONT EXHAUST

115 SP-1201

• Free Speed: 25,000rpm

145 SP-1211

• Free Speed: 20,000rpm

• Speed: 70,000rpm • Length: 156mm • Weight: 350g • 3mm (1/8”)

155 SP-1202

SP-1900

AIR GASKET SANDER

• 13,000 RPM • Length: 229mm • Weight: 2.4Kg

• 12,000 rpm • 50mm capacity

PLUS BONUS GASKET REMOVAL KIT

159 SP-1511

CUT-OFF TOOL 75mm (3")

149 SP-2254LC $

AUTOMOTIVE CHISEL GUN

• Chisel shank size: 10mm • Blows per minute: 3000 • Weight: 1.19kg

145 SP-1405 199 SP-7230 $

179

$ BONUS VALUE $30

STRAIGHT AIR SAW

100mm MINI ANGLE GRINDER

• RPM: 20,000 • Built-in power regulator

199

$ • Free Speed: 18,000rpm

PRICE $169 $169

AIR MICRO GRINDER

1/4”DR ANGLE HEAD DIE GRINDER

3/8"DR INDUSTRIAL PISTOL DRILL

MODEL DRIVE SP-1133SX 3/8" SP-1133SX-2 1/2"

• Max Torque: 30 ft-lbs • Free Speed: 230rpm

1/4”DR MEDIUM DIE GRINDER

• RPM: 2500RPM • Capacity: 9.5mm • Length: 152mm • Ideal for production lines • Geared chuck • Lightweight - Only 740g

• Max Torque: 124 ft-lbs • Length: 254mm

SP-1330HB

INDUSTRIAL HYDRAULIC RIVETERS

• 240mm long • 10,000 strokes p/min • 1.5mm cutting cap.

1/4” CAPACITY

PLUS BONUS 4PC HACKSAW BLADE PACK

299 SP-2730

Bonus valued at $29

• Air Con: 113L/Min • Pulling power: 3,100lbs (1407kg) • Nose tips included: 3.2, 4.0, 4.8, 5.6 & 6.4mm • Weight 1.97kg

NEW UPGRADED AIR TOOL RANGE FROM SP

399 SP-2308

COMPRESSORS TRADE DUTY PORTABLE AIR COMPRESSOR - UTE PACK LOW PROFILE • Light weight & compact - Ideal for mobile applications - Fits under Tonneau style ute lids • Full brass non-return valve • Copper delivery pipe • 200mm (8”) solid rubber wheels • One-touch (Nitto style) connector MODEL SP11-12X

HP 2.2

$40

TANK FAD PRICE 10L 127L/Min $398

TRADIE CA$H

PORTABLE AIR COMPRESSOR • Light weight & high trade • Certified safety valve quality • Large oil level sight glass • One man lift • After cooler • Larger tank capacity • Soft start valve • Full brass non-return valve • Cast iron cylinder • Copper delivery pipe • Thermal reset • 200mm (8”) solid rubber switch wheels • One-touch (Nitto style) connector

30 Years of TRUSTED QUALITY Competitors may match our price, but they will never match our reliability, quality and service. 89mm

1/2”DR STUBBY IMPACT WRENCH MAY RELEASE

G ANVIL

INCLUDIN

MODEL SP11-40X

HP 2.2

TANK FAD PRICE 36L 126L/Min $398

TWIN CAST IRON INDUSTRIAL COMPRESSORS

COMPACT DESIGN PERFECT FOR HARD TO REACH AND CONFINED AREAS

229 SP-1142

• Bolt busting torque: 990Nm • Ideal for mechanical workshops • 89mm Head (including anvil) Perfect for hard to reach areas • Single dog hammer mechanism • 3 torque settings • Forward/reverse • Handle exhaust

• Ideal for commercial • Large oil level sight glass applications • Soft start valve • Full brass non-return valve • Copper winding motors • Copper delivery pipe • Cast iron cylinders • 200mm (8”) solid rubber • Resettable overload wheels protection • One-touch (Nitto style) connector • Certified safety valve MODEL SP14

HP 2.5

TANK 50L

SP17

50L

AMP FAD PRICE 10 230L/Min $895 15 275L/Min $995

6.5HP CAST IRON V-TWIN AIR COMPRESSOR - PETROL DRIVEN

AIR ACCESSORIES & LUBRICANTS AIR TOOL LUBRICANT 1 LITRE

COMPRESSOR OIL 1 LITRE

• Lubricates and Protects • Removes Moisture • Maximises Tool Performance • Prolongs Tool Life • Premium Quality Oil

• Superior Wear & Corrosion Protection • Maximises Pump Performance • Minimises Vibration and Pump Noise • Premium Quality Oil • Prolongs Service Life

19 SPAO1000s

19 SPCO1000s

Made from an engineered hybrid polymer that provides superior all weather flexibility. • Hose will not kink when under pressure. • One-touch Nitto™ style • Swaged hose clamps • 10mm / 3/8” I.D • UV treated

EXTREME FLEXIBILITY SIZE 15m 30m

MODEL SP17P

PRICE $55 $80

ANTI-KINKING TECHNOLOGY

HP 6.5

TANK 60L

FAD 356L/Min

PRICE $1649

PETROL DRIVEN

PREMIUM FITTED AIR HOSE

MODEL SP66-15N SP66-30N

• Take anywhere & will run several air tools at once • Ideal for commecial applications • 6.5hp Torini OHV 4 Stroke Engine • V-Twin Pump with alloy heads • Full brass non-return valve • Copper delivery pipe • 200mm (8”) solid rubber wheels • One-touch (Nitto style) connector • Certified safety valve • Large oil level sight glass

TRIPLE CAST ELECTRIC STATIONARY AIR COMPRESSOR • High efficiency induction motor • Full brass non-return valve • Independent 3 phase switch box operates by a single phase relay pressure switch • One-touch (Nitto style) connector • Large oil level sight glass • Soft start valve • Copper winding motors • Cast iron cylinders • Resettable overload protection MODEL SP25

HP 5.5

TANK 200L

AMP FAD 10P/PH 482L/Min

SP35

7.5

270L

15P/PH 704L/Min

SP50

270L

18P/PH 1085L/Min

PRICE $2699

$3399 $3900

3 PHASE

CORDLESS 12V MECHANICS 5 PIECE POWER COMBO KIT KIT INCLUDES 12v mini 3/8’’dr impact wrench

the best automotive power/Industrial tools available

• Speed: 2200rpm • Torque: 105Nm

12v mini 1/4’’ hex impact driver • Speed: 2200rpm • Torque: 90Nm

With a heritage forged over decades of innovation in the tooling industry, SP Tools is proud to showcase the premium SP MAX DRIVE power tool program, developed to offer superior performance to automotive, industrial and trade applications. Each SP MAX DRIVE tool offers the best componentry for longevity and durability for the life of the tool and are rated in real working PLUS BONUS torque for real performance with optimal size, weight and comfort.

12v mini 3/8’’ (10mm) Drill Driver

CHECK OUT WHAT SOME OF OUR CUSTOMERS HAVE TO SAY ABOUT THEIR SP CORDLESS TOOLS

2x 2.0ah Batteries & Charger

• Speed: 1700rpm • Torque: 17Nm

12v mini 3/8’’dr Ratchet wrench • Speed: 250rpm • Torque: 54Nm

12v led Worklight & Torch • Torch: 30 LUX • Worklight: 160 LUX

MULTIMETER & 5 STAGE BATTERY CHARGER VALUED AT $140

oDY TOUGH "IT'S A BLo G that's t." TESTIMONIAL LITTLE THIN's "Thought I’d share the story of my one. I bought it Guts ou It approximately 18 months ago from our local “SP truck” that worked

visits our work (I’m a diesel mechanic apprentice). About 6 months into owning it, a co worker accidentally knocked it off the top platform of a caterpillar 793C dump truck. It fell to the ground but instead of it hitting the concrete of the work shop floor, it landed in a shallow but approximately 100 litre tray of old hydraulic oil. It sat in there fully submerged for no less than 5 minutes before I was alerted to it. I spent the next half an hour or so trying to dry it out and hoping it would work again. After a lot of cleaning, it eventually started working (although down on power) but it shot lots of sparks and smoke from the vents. It’s now been a year since that incident and I have used it every day (I bring it home on weekends for project car work) and it has not missed a beat other than being down on power compared to a few co workers 3/8 rattle guns of the same model. Anyway, thought I’d let you guys know it’s a bloody tough little thing that’s worked it’s guts out." ADON YATES - Diesel Mechanic Apprentice

12V 1/4” HEX MINI IMPACT DRIVER TORQUE SPEED 90Nm

2200RPM

• Variable speed switch with brake • Powerful motor delivers 90Nm of torque • Ergonomic soft grip handle

199 SP81141

SPEED CONTROL

• Barrel size: 600ml • Speed control function • Patented dripless mechanism • Patented rapid plunger release mechanism • Cut-off switch when plunger reaches the end • Works with all standard size cartridges

2 SPEED

L: 700RPM TORQUE H: 1700RPM 17Nm • Keyless Chuck • 10 selections clutch torque control • Gear box with spindle lock function

189 SP81213

Includes 1x 1.5Ah Battery & Charger

SPTOOLS.COM

DIGITAL MULTIMETER 5 STAGE BATTERY CHARGER

12V 3/8”DR MINI IMPACT WRENCH KIT SP81114

259

KIT INCLUDES 12V MINI 3/8’’DR IMPACT WRENCH • Speed: 2200rpm • Torque: 105Nm

10PC METRIC 6PT IMPACT SOCKET RAIL SET • 10, 11, 12, 13, 14, 15, 16, 17, 18, & 19mm • 1x Socket Rail Set

INCLUDES 2X 2.0AH BATTERIES & CHARGER

12V INDUSTRIAL RIVETER • Powerful motor with a max pulling force of 500Kg • Sets 2.4mm, 3.2mm, 4.0mm & 4.8mm aluminium rivets • Includes 3 interchangeable nozzles • High Capacity: ± 300 rivets on one charge

299 SP81371

$ Includes 1x 2.0Ah Battery & Charger

12V CAULKING GUN - 600ml

369 SP81363

12V 10mm DRILL DRIVER

699 SP82146B

Includes 1x 2.0Ah Battery & Charger

12V 3PC 3/8"DR VERSATILE WORKSHOP BUNDLE $

529 SP82112

KIT INCLUDES 12v mini 3/8’’dr impact wrench • Speed: 2200rpm • Torque: 105Nm

12v 3/8’’dr Long Neck Ratchet Wrench

• Speed: 250rpm • Torque: 54Nm

12v led Worklight & Torch

185mm

• Torch: 30 LUX • Worklight: 160 LUX

2x 2.0ah Batteries & Charger

LONG NECK

Access extremely difficult to reach areas

16 VOLT

16V 3/8” BRUSHLESS IMPACT WRENCH KIT KIT INCLUDES:

392Nm

16v 3/8’’dr impact Wrench • No-Load Speed: 2300rpm • EXTREME Torque: 392Nm • Variable speed trigger with brake • Powerful motor • Fast Charge - Only 40 Mins

2x 16v 2.0Ah Battery Packs • Compact • Lightweight • More Power for longer • Max Lithium

EXTREME TORQUE Patented “V” type Hammer - Low Vibration

16v Battery Charger 10PC 3/8”Dr 6PT Impact Socket Rail Set • 10 to 19mm

The new SP Max Drive power tool program has been developed to offer superior performance to automotive, industrial and trade applications. Each SP Max Drive tool offers the best componentry for longevity and durability for the life of the tool and are rated in real working torque for real performance with optimal size, weight and comfort.

16V 10mm DRILL 2 SPEED

• Keyless Chuck • 11 selections clutch torque control • Gear box with spindle lock function

159 SP81222BU $

INCLUDES: 2x Battery Packs Plus Socket Rail Set

16V 1/4" GASKET SANDER SPEED

16V 3/8”DR MINI IMPACT WRENCH TORQUE SPEED

• Variable speed trigger with brake • 50mm Pad Includes 2x 1.5Ah Batteries & Charger

• Variable speed trigger with brake • Powerful motor • Includes 1x 2.0Ah Battery & Charger

185Nm

8000RPM

L: 360RPM TORQUE H: 1550RPM 27Nm

279 SP81352

SKIN ONLY Battery & charger not included

ALSO AVAILABLE SKIN ONLY $

SP81352BU

179

While this voltage is used mainly in the building and construction industries, with the new high power motors and batteries. Cordless is moving into new fields.

18 VOLT

349 SP81120

329

2400RPM SP81119LE

PLUS BONUS 10PC 3/8”DR 6PT IMPACT SOCKET RAIL SET • 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm

COMPACT, LIGHTWEIGHT & Powerful SP TOOLS CORDLESS CUSTOMER TESTIMONIALS

ars still "This is mine, 5 ye also been s It aN animal gun.olant twice" drowned in co Daniel Hanna

18V 1/4” HEX BRUSHLESS IMPACT DRIVER

"Sp forever"

EXTREME CONTROL

Maykee TheAng

More control means reduced overdriving, breaking and stripping of screws

$50

SP MAX DRIVE GIVES YOU 3 SPEEDS AND 2 TORQUE SETTINGS FOR ALL APPLICATIONS SETTING 1: RPM 0-900 - IPM 0-1000 - TORQUE 10.7NM SETTING 2: RPM 0-2100 - IPM 0-2900 - TORQUE 98NM SETTING 3: RPM 0-3000 - IPM 0-4000 - TORQUE 205NM REVERSE: RPM 0-3000 - IPM 0-4000 - TORQUE 205NM

APPRENTICE CASH

Includes 2x 4.0Ah Battery & Charger

18V BRUSHLESS 5” CUT OFF/ANGLE GRINDER

HIGH TORQUE

499

SP81147

18V 13mm HAMMER DRILL DRIVER TORQUE 2 SPEED L: 460RPM 60Nm H: 1650RPM

• Powerful brushless induction motor delivering high torque at 7000RPM • Wheel size: 5” (125mm)

275 SP81313BU $

SKIN ONLY Battery & charger not included

Includes 2x 3.0Ah Batteries & Charger ALSO AVAILABLE $ SKIN ONLY $

SP81244BU

BOLT BUSTING TORQUE 1490Nm • Variable speed switch with brake • Powerful motor delivers 1000Nm of max torque

• 2 Speed gear box • 15 selections clutch torque control plus hammer • All steel chuck

545 SP81244

18V 1/2”DR IMPACT WRENCH

269

695 SP81130

Includes 2x 5.0Ah Batteries & Charger

CORLESS TOOLS 18V 1/2”DR IMPACT WRENCH KIT

168 mm

INCLUDING ANVIL

INDUSTRY LEADER 970Nm

2200RPM

BOLT BUSTING TORQUE

NO LOAD SPEED LIGHTWEIGHT

COMPACT DESIGN

KIT INCLUDES: 18v 1/2’’dr impact Wrench • Torque: 690Nm • Variable speed switch with brake • Powerful Brushless Motor

ONLY 169mm LONG

18v 2.0Ah Battery Pack

BRUSHLESS TECHNOLOGY

• Compact • Lightweight • Powerful

SP Maxdrive Brushless motors provide more runtime and superior power when compared to other leading brands. Using the highest quality components and industry best manufacturing process, we deliver the power that you need…. SP Maxdrive

18v 4.0Ah Battery Pack • More Power for longer • Max Lithium

18v Battery Charger

699 SP81133

INCLUDES:

2x Battery Packs

SP TOOLS CORDLESS CUSTOMER TESTIMONIALS

da "Rattle gun an kit ol to t or sp motor on" s ar still going 6 ye Brandon McQueen

"She's done well! 6 years rd" going han Fak houry

"Unbreakable" ve it tools, i lo rnino Espinosa Cha

Christia

d "7 years old anng " ro still going st Kris Henery

16V COMBO KIT

18V DRILL DRIVER KIT

LIMITED STOCK

KIT INCLUDES: 16v mini 3/8’’dr impact wrench • Torque: 185Nm

16v 1/2”Dr Ratchet Wrench • Torque: 120Nm

16v mini 1/4’’ Hex Impact Driver • Torque: 140Nm

2x 2.0ah Battery 1x 16v charger

599 SP82183

INCLUDES 2x BATTERY PACKS & CHARGER

KIT INCLUDES: 18v 1/4’’dr impact Driver • 3 speeds & 2 torque settings • 900rpm (10.7Nm) to 3000rpm (205Nm)

18v 1/2’’ (13mm) Hammer Drill Driver • Speed: 1650rpm • Torque: 60Nm

1x 2.0ah Battery 1x 4.0ah Battery 1x 18v charger

599 SP82202

INCLUDES 2x BATTERY PACKS & CHARGER

While Austech Industries makes every reasonable effort to ensure the accuracy and validity of the information provided. Pricing and specifications are continually changing, Austech Industries reserves the right to change at any time without notice, the information contained in our Trade Catalogues, Promotional Brochures, Catalogues and all such print media, and makes no warranties or representations as to its accuracy. All prices include GST. Not all products in this brochure are available from all outlets. Prices may vary in some country areas due to freight costs. All products in this brochure were available at the time of printing. Austech Industries will do everything possible within reason, to maintain stocks of products advertised but cannot be responsible for unforeseen shortfalls beyond their control. E & O Copyright. WWW.SPTOOLS.COM Please note: Images are for illustration purposes only, contents and colours may vary.