TOOL
SIMPLY PURCHASE AN 'APPRENTICE CASH' MARKED PRODUCT AND RECEIVE AN ONLINE VOUCHER TO SPEND AT WWW.SPTOOLS.COM ARE YOU AN APPRENTICE?APPRENTICE CASH REDEEMING IS QUICK AND EASY. VISIT OUR APPRENTICE PAGE AT SPTOOLS.COM FOR MORE INFORMATION Visit sptools.com for full terms & conditions. $149 SP81400 $99 SP81451 BLUETOOTH SPEAKER. WORK LIGHT. POWER BANK. • Connects to your smart device via long range bluetooth 5.0, allowing you to play all your jams on the go, in the workshop, at home, in the gym or out camping. • High powered magnetic worklight • Charge your smart devices using the built-in 2.0 USB port $239 NORMALLY • 4 brightness settings: low/medium/high & UV • 90° Rotatable head –Swivels into L-shape MULTi-FUNCTION UV INSPECTION LED MAG BASE WORK LIGHT/TORCH • Metric, Hex, Torx & Spline Sockets • 90T Sealed Head Ratchet • Flex Handle • Extension Bars • Universal Joint • Metric, Hex, Torx & Spline Sockets • 90T Sealed Head Ratchet • Flex Handle • Extension Bars • Universal Joint LOW RUNNING NOISE Equivalent to the average sound at home and having a conversation MEETS STRICT ENVIRONMENTAL PROTECTION AGENCY (EPA), PROPOSED AUSTRALIAN EMISSIONS STANDARDS & STRICT CALIFORNIAN POLLUTION LAWS AND ENVIRONMENTAL PROTECTION STANDARDS. 39pc 3/8”DR SOCKET SET35pc 1/4”DR SOCKET SET LUMENS 900 TORCH LUMENS 400 TORCH LUMENS 90 TORCH PROFESSIONAL GRADE UV LIGHT IDEAL FOR SCRATCH INSPECTION AND LEAK DETECTION SYNC 2 DEVICES FOR SURROUND SOUND DUAL LINK MORE INFO $169 SP20116 $249 SP20216 • Torini 4 stroke engine • 3 in 1 multi-function control • Engine smart control (ESC) • Compact, lightweight and high quality • 32 bit inverter core • Low running noise/: 51-59dB • 12 Volt outlet • Parallel connection capable • Robust construction • Easy oil-change compartment POWERFUL, COMPACT AND WITH A SUPER QUIET RUNNING NOISE, THE RANGE OF SP INVERTER GENERATORS ARE IDEAL FOR ALL CAMPING AND LEISURE ACTIVITIES. 4 LITRE TANK2500 Watts 2x 15A OUTLETS $999 SPGi3000 $1650 NORMALLY SINE WAVE TECHNOLOGY DIGITAL SUPER QUIET 2500w INVERTER GENERATOR Dimensions: 600 x 340 x 530mm
CATALOGUE SUMMER SCORCHER ISSUE 1 OCT - 15 JANUARY 2023
QUAD DRIVE INCLUDES TOOL KITS CUSTOM SERIES TOOL KIT METRIC/SAEMETRIC/SAE 668(W) x 316(D) x 461(H) QUAD DRIVEQUAD DRIVE SPANNERS INCLUDES 218PC134PC 1450 SP50121 1149 SP50097 729(W) x 508(D) x 660(H) Service Tool Kit METRIC/SAE 3995 SP50218 411PC INCLUDES Jumbo 3/4"Dr Sockets up to 55mm & 1-7/8" PLUS $440 TRADIE CA$H QUAD DRIVE SPANNERS INCLUDES 238PC CUSTOM SERIES Roller CAB TOOL KIT WITH SIDE CABINET METRIC/SAE 1596(W) x 480(D) x 1070(H) THIS KIT IS ALSO AVAILABLE WITH ADDITIONAL EVA FOAM TRAYS OPTIONS AVAILABLE $2695 SP50626X FOAMED APPRENTICE CASH $270 $2595 SP50626 STANDARD APPRENTICE CASH $260 TECH SERIES TOOL KIT METRIC ONLY 730(W) x 480(D) x 507(H) QUAD DRIVE SPANNERS INCLUDES 212PC 888 SERIES STARTER KIT METRIC ONLY 510(W) x 200(D) x 210(H) 212PC $1895 SP50033D $395 T850090 • 1/4", 3/8" & 1/2"Dr sockets & access. • Quad Drive ROE spanners • Screwdriver & hex key sets • Pliers, cutters & pry bar set • Pin punches & chisels + MUCH MORE APPRENTICES! Purchase this kit and receive up to $270 worth of online credit to use towards your next purchase at SPTOOLS.COM $$1795 1695 SP50123 SP50123X FOAMEDSTANDARD APPRENTICE CASH $180 APPRENTICE CASH $170 CUSTOM SERIES TOOL KIT METRIC/SAE 668(W) x 445(D) x 465(H) 254PC Morris Finance Ltd: ABN 70 083 630 139 Australian Credit Licence: 395 249 - *Weekly payments for the Tools of the Trade payment plans are based on approximately $1000 investment financed over 4 years. These payments are an indication only and variables such as loan type, applicant profile and current interest rates are not taken into account. Exact payments will be provided on application. For approved applicants only, terms and conditions apply. SP EASY CREDIT CAN HELP YOU FINANCE YOUR SP TOOLS PURCHASE OVER THE COMBINED VALUE OF $1000 AND REPAYMENTS START FROM AS LITTLE AS $8 PER WEEK*. APPLY NOW AT SPTOOLS.COMREPAYMENTS START FROM ONLY $8 PER WEEEK OWN QUALITY TOOLS AND EQUIPMENT TODAY AND PAY THEM OFF WEEKLY! 2
THIS KIT IS ALSO AVAILABLE WITH ADDITIONAL EVA FOAM TRAYS OPTIONS AVAILABLE THIS KIT IS ALSO AVAILABLE WITH ADDITIONAL EVA FOAM TRAYS OPTIONS AVAILABLE AVAILABLE IN 2 ADDITIONAL COLOUR OPTIONS CUSTOM SERIES KITS SUMO SERIES KIT THIS KIT IS ALSO AVAILABLE WITH ADDITIONAL EVA FOAM TRAYS OPTIONS AVAILABLE 680(W) x 460(D) x 1405(H) $$3850 3750 SP50110 SP50110X FOAMEDSTANDARD APPRENTICE CASH $385 APPRENTICE CASH $375 METRIC/SAE 680(W) x 460(D) x 1405(H) $5495 SP50165 STANDARD $5595 SP50165X FOAMED 629PC CUSTOM SERIES TOOL KIT METRIC/SAE 680(W) x 460(D) x 1277(H) $1699 SP50113APPRENTICE CASH$170 206PC QUAD DRIVE SPANNERS INCLUDES THIS KIT IS ALSO AVAILABLE WITH ADDITIONAL EVA FOAM TRAYS OPTIONS AVAILABLE METRIC/SAE 680(W) x 460(D) x 1405(H) $$2695 2595 SP50104 SP50104X FOAMEDSTANDARD 244PC QUAD DRIVE SPANNERS INCLUDES THIS KIT IS ALSO AVAILABLE WITH ADDITIONAL EVA FOAM TRAYS OPTIONS AVAILABLE QUAD DRIVE & FLARE NUT SPANNERS INCLUDES TECH SERIES TOOL KIT METRIC/SAE 745(W) x 480(D) x 1520(H) $3095 SP52265D STANDARD $3195 SP52265DX FOAMED 282PC SP50175X Solid Black SP50176X Black/Blue SP50177X Black/Green $3995 EACHFOAMED $3950 EACHSTANDARD SP50175 Solid Black SP50176 Black/Blue SP50177 Black/Green INCLUDES QUAD DRIVE SPANNERS 30% WIDER STORAGE 853(W) x 460(D) x 1406(H) mm SUMO SERIES TOOL KIT METRIC/SAE 417PC PLUS BONUS MECHANICS FAST BACK GARAGE CREEPER VALUED AT $299 QUAD DRIVE, GEAR DRIVE, FLARE NUT, E-TORX & DOUBLE RING SPANNERS MECHANICS FAST BACK GARAGE CREEPER VALUED AT $299 SPTOOLS.COMFULL TOOL LISTINGS AVAILABLE AT 3
FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT 1 Compartment Adjustable Shelf 1090mm SUMO SERIES Roller Cabinet WITH POWER Tool CUPBOARD AND BUILT-IN POWER BOARD • Stainless steel work top • Heavy duty 28 ball bearing drawer slides • Internal locking system • SP Cliklok drawer locking system ensures drawers stay closed and secure • Heavy duty wheels • Double powder coating resists scratching 1434w x 560d x 1074h (mm) Built-in power board with 4 individually switched power outlets and 4 USB ports, adjustable shelf and deep drawer 12 Drawer POWER TOOL CUPBOARD STAINLESS STEEL WORKTOP BUILT-IN POWER BOARD FULL LENGTH DEEP TOP DRAWER SP CLIKLOK DRAWER LOCKING SYSTEM $2695 SP40095 1434mm 560mm STAINLESS STEEL WORK TOP PLUS $270 TRADIE CA$H As the need for more storage space arises, side cabinets are a great option for adding more room to your SP Tool Kit. SP’s Range of side cabinets are designed to easily slide on to and hang off the side of both Custom and Sumo Series Roller cabinets. No screwing anything together. SIDE TOOL CABINETS $295 SP40132 $595 SP40131 7 Drawer SUITS CUSTOM & SUMO SERIES ROLLER CABINETS *EXCLUDES USA SUMO SERIES EXPANDING YOUR Tool STORAGE MADE SIMPLE! CUSTOM SERIES 7 Drawer ROLL CAB • Internal locking system • Heavy duty 28 ball bearing drawer slides • Robust wall construction • Double powder coating • Full drawer extension capabilities • Heavy duty castors - 2x lockable swivel 680w x 460d x 940h (mm) $795 SP40104 8 Drawer TOOL BOX • Internal locking system • 28 ball bearing drawer slides • Robust wall construction • Double powder coating • Full drawer extension capabilities 668w x 445d x 465h (mm) $549 SP40103 STACKABLE STORAGE CUSTOM SERIES $399 SP40101 7 Drawer TOOL BOX • Internal locking system • Heavy duty 28 ball bearing drawer slides • Robust wall construction • Double powder coating • Full drawer extension capabilities 668w x 316d x 461h (mm) SPTOOLS.COM STORAGE 4
18 DRAWER • Built in surge protected power-board with 4 power outlets and 4 USB ports, ideal for power tools, chargers, etc • SP Cliklok on all drawers ensures drawers stay closed and secure • Anti-slip matting in Hutch.1066w x 480d x 1610h (mm) • Scratch Free, powerful magnetic back plate allows holders to stick to steel tool boxes, roller cabinets, etc • Organises frequently used tools and frees up drawer space • Constructed from durable light-weight steelMAGNETIC HOLDERS PERFECT FOR QUICK ACCESS TO FREQUENTLY USED TOOLS SPRAY CAN Holder PAPER TOWEL Holder SCREWDRIVER Holder & TRAY$29 SP30908 $23 SP30907 $20 SP30909 T-handle SOCKET Set Holder $15 SP30905 • Best suited for: SP 9pc T-handle Socket Set (SP20800) • Best suited for aerosol cans: spray paint, WD-40, cleaners, lubricant sprays etc • Ideal for having paper towel handy • Adjusts to various length rolls • Side holes for holding screwdrivers • Tray section ideal for holding parts, screws, bolts, nuts etc 900w x 490d x 890h (mm) Tool Trolley 2 Drawer • Screwdriver slots on both sides of trolley • 2x Swivel lockable heavy duty castors • 2x Fixed heavy duty castors SUMO SERIES POWER HUTCH TOOL BOX & ROLL CAB COMBO WITH BUILT-IN POWER BOARD $2495 SP40698 $495 SP40107 • Heavy duty steel frame • 3x lockable drawers • 53 Litre storage capacity • Can be bolted to the floor 2000w x 645d x 872h (mm) HEAVY DUTY WORKSHOP BENCH MAX LOADKG 1000KG Stainless steel & rubber worktop • Stainless steel worktop • Heavy duty castors - 2x lockable swivel • Paper towel holder • Side storage compartment/bin • SP Cliklok drawer locking system • Internal locking system • Side storage compartments 1145w x 480d x 1030h (mm) 13 DRAWER $1995 SP42355D TECH SERIES ROLL CAB PLUS $250 TRADIE CA$H PLUS $100 TRADIE CA$H $799 SP40400 $1199 NORMALLY $500 SAVE NOW ONLY $2995 NORMALLY SIMPLY PURCHASE A 'TRADIE CASH' MARKED PRODUCT AND RECEIVE AN ONLINE VOUCHER TO SPEND AT WWW.SPTOOLS.COM PICK THE BONUS TOOLS YOU WANT REDEEMING IS QUICK AND EASY. VISIT OUR TRADIE CASH PAGE AT SPTOOLS.COM FOR MORE INFORMATION Visit sptools.com for full terms & conditions. TRADIE CA$H 5
1090mm 622mm 1500mm 13 Drawer Roller CABINET DOUBLE Drawer BANK STAINLESS STEEL WORKTOP FULL LENGTH TOP DRAWER EXTREME DUTY SPRING CASTORS 27" SIDE CABINET Clothes Rail & FIXED Shelves 700(W) x 622(D) x 1954(H) • Side cabinets can be used on either side of the hutch and roll cab combo C 3250mm (128”) A B D $2395 EACH customisable STORAGE SOLUTIONS 73" WORKSHOP RoLLER CABINET 21 Drawer 59" WORKSHOP RoLLER CABINET 13 Drawer 1500(W) x 622(D) x 1090(H) $5995 EACH $4500 1090mm 622mm 1850mm CUSTOMISE YOUR OWN STORAGE SOLUTION SP makes it easy to expand your tool kits storage. Start with a roller cab or roll cab hutch combo and add side cabinets when the time comes for more storage space. 27" SIDE CABINET 4 Roller SHELVES & 1 FIXED 700(W) x 622(D) x 1954(H) $2495 EACH $2995 EACH $2495 EACH • Includes up to 2x magnetic mount power boards • Steel pegboard rear wall • Includes up to 2x 600mm LED lights 21 Drawer Roller CABINET Triple Drawer BANK STAINLESS STEEL WORKTOP EXTAR LONG TOP DRAWER EXTREME DUTY SPRING CASTORS A D C 73" POWER TOP HUTCH SHELF/LIGHT/PEGBOARD 59" POWER TOP HUTCH SHELF/LIGHT/PEGBOARD 1850(W) x 622(D) x 864(H) 1500(W) x 622(D) x 864(H)B ALSO AVAILABLE AS 704PC TOOL KITS 128" COMPLETE STORAGE WORKSTATION COMBINED DIMENSIONS: 3250w x 622d x 1954h (mm) WORKSTATION INCLUDES: 73" USA SUMO 21 Drawer Roller Cabinet & Power Top Hutch & 2x 27" Side Cabinets SP44890 SP44890BL SP44890G AVAILABLE IN 3 COLOUR OPTIONS $12,990 EACH $18,995 EACH VISIT SPTOOLS.COM FOR TOOL LISTING SP50845 SP50845BL SP50845G SP44830 SP44830BL SP44830G SP44730 SP44730BL SP44730G SP44885 SP44885BL SP44885G SP44880 SP44880BL SP44880G SP44825 Black/Chrome SP44825BL Blue/Black SP44825G Green/Black SP44725 Black/Chrome SP44725BL Blue/Black SP44725G Green/Black 1850(W) x 622(D) x 1090(H) 6
LUMENSLUMENS TORCHWORKLIGHT 130 50 • 3 Settings • Strong Magnetic Base • Rechargeable • 360° Swivel Joint COB LED WORK LIGHT LUMENS 700 WORKLIGHT LUMENS WORKLIGHT 350 LUMENS WORKLIGHT 100 COMPACT SWIVEL COMPACT WORKLIGHT/TORCH • SMD LED Worklight: 300 Lumen • LED Torch: 100 Lumen • Adjustable Dimmer Worklight: 300 to 30 Lumens • Flexible Magnetic Base • 180° Fold Out Hook WIRELESS CHARGE SMD LED WORK LIGHT & TORCH Twin Pack WORKLIGHT/TORCH • SMD LED Worklight: 500 Lumen • LED Torch: 150 Lumen • Adjustable Dimmer Worklight: 500 to 75 Lumens • Flexible Magnetic Base • 180° Fold Out Hook DUAL ZONE CHARGING PAD • Dual charging zones • Magnetic zones holds lights firmly in place while charging WIRELESS CHARGE WORKLIGHT & TORCH LUMENSLUMENS TORCHWORKLIGHT 500 150 LUMENS LUMENS LUMENS LUMENS TORCH TORCH WORKLIGHT WORKLIGHT 300 500 100 150 • Adjustable Dimmer Worklight • Flexible Magnetic Base • 180° Fold Out Hook • Magnetic zone holds light firmly in place while charging CHARGING PAD ALSO WIRELESSLY CHARGES ALL QI ENABLED DEVICES $279 SP81499 $169 SP81496 • Compact lightweight design • Strong magnetic clip • Rechargeable Lithium Ion • Overall Length: 80mm • Width: 20mm TORCH/WORK LIGHT LED PEN MAGBASE SP81439 $25 SP81456 $99 TORCH/WORK LIGHT SMD LED MAGBASE LUMENS 350 WORKLIGHT LUMENS WORKLIGHT 100 • Run time: 13/4/2 Hours (Low/Med/High) $89 SP81448360° SWIVEL CORDLESS LIGHTING PROTECTORWORKSHOP SEATING MECHANICS MAGNETIC PROTECTOR CHECK OUT THE PRODUCT VIDEO $299 SPR-78 • Heavy duty steel frame • 6 heavy duty wheels • Padded body & head rest • 1030mm x 440mm FAST BACK HEAVY DUTY IDEAL FOR TRUCKS & BUSES • Ultra stable three wheel configuration • 3” twin axis sealed bearing control caster • 7” dual bearing all terrain wheels • Built-in tool trays • Capacity: 225Kg • 1040 x 570 x 230mm MECHANICS CREEPERS PNEUMATIC STOOL WITH SWIVEL TOP WORKSHOP SEAT 3 DRAWERS $135 T8R58 • 370 x 400 x 367mm $59 SPR-22 Heavy Duty Shop Seat$149 SPR-50 • Easy access storage tray • High density foam seat • Adjusts from 660 to 787mm • Vinyl with soft inner to protect car paintwork • Contains hidden sleeved magnets to hold cover firmly in position • Resistant to oil, grease & water • Super bright SMD LED work light • High power LED torch/ top light • Rechargeable Lithium-ion $399 NORMALLY $279 NORMALLY $149 SPR-60 WORKSHOP GEAR 7
CORDLESS 10PC METRIC SOCKET RAIL 2.0AH BATTERIES + CHARGER 12v 3/8”Dr Mini IMPACT WRENCH KIT 105Nm TORQUE 2200RPM SPEED • 12v Mini 3/8’’Dr Impact Wrench • 10pc Metric Impact Socket Rail Set • 2x 2.0Ah Max Lithium Battery Packs • Keyless Chuck • 10 clutch torque selection • Includes L: 700RPM 2 SPEED H: 1700RPM 12v 10mm Drill Driver $239 SP81213 SP81213BU SKIN ONLY $155 12v 1/4” Hex Mini IMPACT DRIVER 90Nm TORQUE 2200RPM SPEED • Variable speed switch with brake • Ergonomic soft grip handle • Includes 1x 2.0Ah battery & charger SP81141BU SKIN ONLY $177 $369 SP81363 • No-Load Speed: 2300RPM EXTREME TORQUE 392Nm • Pad size: 6.35mm (1/4”) • Powerful motor • Includes 2x 3.0Ah battery & charger • Capacity (belt sizes): 460 x 10mm & 330 x 10mm • 8 position versatile adjustable arm for ease of use in tight confined spaces • Quick change lock and release. Switch belts quickly • Includes 2x 3.0Ah battery & charger 8000RPM SPEED 6500RPMSPEED 16v GASKET SANDER 16v BELT SANDER 16v RECIPROCATING SAW • No-Load speed: 0-3000spm • Stroke length: 14mm • Quick-release blade holder - no tools required • Adjustable blade depth support • Variable speed trigger SKIN ONLY $345 SP81352 $395 SP81350 INCLUDES 2X 2.0AH BATTERIES & CHARGER $429 SP81354 • Includes 1x 3.0Ah battery & charger PLUS 10PC 3/8”DR 6PT IMPACT SOCKET RAIL SET 16v 3/8” BRUSHLESS IMPACT Wrench Kit INCLUDES 2X 3.0AH BATTERIES & CHARGER SP81120BU SKIN ONLY $320 $429 SP81120 Patented “V” Type Hammer. Low Vibration 12v 3/8”Dr Mini Ratchet Wrench • Compact design with long 185mm neck provides access to previously difficult to reach areas • Reversible • Built-in LED light illuminates work area 54Nm TORQUE INCLUDES 1X 2.0AH BATTERY & CHARGER 185mmNECK SP81114 $299WATCH THE DEMO VIDEO $335 NORMALLY SP81363BU SKIN ONLY $245 $249 SP81141 8
INCLUDES 2X 5.0AH BATTERY PACKS & CHARGER • Variable speed trigger • Powerful brushless motor • Ergonomic soft grip handle • Weight: 1.67kg (With Battery) EXTREME CONTROL 18v 1/4” HEX BRUSHLESS IMPACT DRIVER SP81147 $499 INCLUDES 2X 5.0AH BATTERY PACKS & CHARGER SP Maxdrive Brushless motors provide more runtime and superior power when compared to other leading brands. Using the highest quality components and industry best manufacturing process, we deliver the power that you need…. SP Maxdrive BRUSHLESS TECHNOLOGY • 0-900 RPM • 0-1000 IPM TORQUE 10.7NmSETTING 1 • 0-2100 RPM • 0-2900 IPM TORQUE 98NmSETTING 2 • 0-3000 RPM • 0-4000 IPM TORQUE 205NmSETTING 3 • 0-3000 RPM • 0-4000 IPM TORQUE 205NmREVERSE SP MAX DRIVE GIVES YOU 3 SPEEDS AND 2 TORQUE SETTINGS FOR ALL APPLICATIONS AVAILABLE IN SKIN ONLY SP81147BU $295 MORE CONTROL MEANS REDUCED OVERDRIVING, BREAKING AND STRIPPING OF SCREWS 2000Kg PULLING FORCE ± 1300 rivets on one charge HIGH CAPACITY • Sets ± 1300 rivets on one charge (650 stainless 6.4mm rivets off 1x 5.0ah battery charge) • Powerful brushless motor • Suits all materials - aluminium, steel & stainless steel • Includes interchangeable nozzles • Attached collection bottle 18v Industrial Riveter $995 SP82233 SETS RIVET SIZES 3.2mm2.0mm 4.0mm 18V BRUSHLESS COMBO KIT 1490Nm BOLT BUSTING TORQUE Includes 2x 5.0Ah Batteries & Charger Includes 2x 5.0Ah Batteries & Charger 1788Nm BOLT BUSTING TORQUEBOLT BUSTING TORQUE PLUS BONUS 11PC 1/2”DR METRIC DEEP IMPACT SOCKET RAIL SET - VALUED AT $125 18V 1/2"DR IMPACT WRENCH PLUS BONUS18V 3/4"DR IMPACT WRENCH18v 1/2” IMPACT Wrench BRUSHLESS 945 SP81140$795 SP81134 $899 SP81130 Includes 2x 5.0Ah Batteries & Charger the best automotive power/Industrial tools available 18V 1/2’’Dr ImPAcT wrENch • Speed: 2200rpm • Torque: 970Nm 18V 1/4’’ HEx ImPA • 3 Speeds • 2 Torque Settings 18V CuT Off/ ANg GrINdEr • Brushless • Torque: 7000rpm KIT INCLUDES ALL FOR SP81140BU SKIN ONLY $729 $995 SP81376 $685 NORMALLY MAX DRIVE SIMPLY PURCHASE A 'TRADIE CASH' MARKED PRODUCT AND RECEIVE AN ONLINE VOUCHER TO SPEND AT WWW.SPTOOLS.COM PICK THE BONUS TOOLS YOU WANT REDEEMING IS QUICK AND EASY. VISIT OUR TRADIE CASH PAGE AT SPTOOLS.COM FOR MORE INFORMATION Visit sptools.com for full terms & conditions. TRADIE CA$H 9
SPLINE SPLINE INHEX INHEX INHEX $489pc METRIC & SAE • METRIC - 3, 4, 5 & 6mm • SAE - 1/8, 5/32, 3/16, 7/32 & 1/4” 1/4” Inhex Socket Rail Set INHEX SP20540 $659pc METRIC • 1/4”Dr - 3, 4, 5 & 6mm • 3/8”Dr - 6, 7, 8, 9 & 10mm 1/4” & 3/8”DR INHEX SOCKET RAIL SET SP20545 $8012pc E-TORX • E4, E5, E6, E7, E8, E10, E11, E12, E14, E16, E18 & E20 3/8”Dr E-TORX Socket Rail Sets SP20550 • Access hard to reach nuts and bolts in engine bays 3PC WOBBLE EXTENSION BAR SETS $379pc SAE • 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 & 1/2" 1/4”Dr Socket Rail Set 12 PT $89 7pc SPLINE (100mm Long) • M4 to M10 SP20544 3/8”DR SPLINE SOCKET RAIL SET E TORX TORX E $11912pc E-TORX • E4, E5, E6, E7, E8, E10, E11, E12, E14, E16, E18 & E20 3/8”Dr E-TORX Socket Rail Set SP20551 E TORX TORX E $69 $5910pc METRIC • 4 to 13mm SP20140 9pc SAE • 3/16 to 1/2" SP20141 1/4”Dr DEEP Socket Rail Sets AVAILABLE IN METRIC & SAE 6 PT $7211pc SAE • 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 & 1” 1/2”Dr Socket Rail Set 6 PT AVAILABLE IN 3/8" & 1/2" $6510pc METRIC • 1/4”Dr - 1/8, 5/32, 3/16, 7/32 & 1/4” • 3/8”Dr - 3/16, 7/32, 1/4, 5/16 & 3/8” 1/4” & 3/8”DR INHEX SOCKET RAIL SET SP20546 $9510pc METRIC & SAE • METRIC - 6, 7, 8, 9 & 10mm • SAE - 3/16, 7/32, 1/4, 5/16 & 3/8” 3/8” Inhex Socket Rail Set SP20541 $697pc SPLINE (48mm Long) • M4, M5, M6, M7, M8, M9 & M10 3/8”DR SPLINE SOCKET RAIL SET - SHORT SP20543 MODEL SIZE PRICE SP22330 3/8”Dr $53 SP23330 1/2”Dr $103 41PC 1/2"DR METRIC/SAE SOCKET SET32PC 3/8"DR METRIC/SAE SOCKET SETS23PC 1/4"DR METRIC/SAE SOCKET SET 9PC WOBBLE EXTENSION BAR SET SP20300 $249 SP20200 $149 SP20100 $95 • METRIC 10 to 26, 27, 30 & 32mm • SAE: 3/8 to 1-1/4” • Spark Plug Sockets • 45T Ratchet • Flex Handle • Extension Bars • Universal Joint • METRIC: 6 to 22mm • SAE: 1/4 to 7/8” • 45T Ratchet • Flex Handle • Spark Plug Sockets 12 PT 12 PT • METRIC: 4 to 13mm • SAE: 3/16 to 1/2” • 45T Ratchet • Flex Handle • Extension Bar 12 PT 8pc 3/8”DR MAGNETIC SPARK PLUG Socket Set 6 POINT - 6PC • 13, 14, 16, 18, 19mm & 13/16” 12 POINT - 2PC • 12 & 14mm $99 SP20290 $99 SP20988 • 1/4”Dr - 50, 100 & 250mm • 3/8”Dr - 50, 100 & 250mm • 1/2”Dr - 50, 100 & 250mm ASSORTMENT OF 1/4", 3/8" & 1/2"DR BARS 6 PT 12 PT $95 METRIC & SAE SP20131 SP20333 SOCKETS SOCKET RAILS & ACCESSORIES 10
1"DR IMPACT SOCKET SETS 9pc METRIC 27, 30, 32, 34, 36, 38, 41, 46 & 50mm SP20510 9pc SAE • 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-5/8, 1-3/4, 1-7/8 & 2” SP20515 6 PT $375 EACH 3/4"DR IMPACT SOCKET SETS 8pc METRIC • 24, 27, 30, 32, 34, 36, 41 & 46mm SP20410 8pc SAE • 1, 1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16 & 1-1/2” SP20415 6 PT $229 EACH 1/2”Dr Stubby Impact Socket Rail Set3/8”Dr STUBBY Impact Socket Rail Set $69 $9910pc METRIC • 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm 12pc METRIC • 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24mmSP20255 SP20355 6 PT 6 PT $69 • 14, 17, 19, 21 & 22mm 5PC 1/2"DR WHEEL NUT IMPACT SOCKET RAIL SET SP20390 6 PT 15pc 1/2"DR DEEP IMPACT SockeT SET Metric $175 SP20320 $149 EACH 6 PT 12pc 3/8”DR IMPACT TWIST SOCKET SET • METRIC: 8, 10 to 19mm + Pin punch • Twisted teeth dig in to rounded bolts/lug nuts to provide extreme grip for easy removal. TWIST $169 SP31260 • 10 to 20, 21, 22 & 24mm 42pc 1/4" & 3/8"DR METRIC/ SAE SOCKET SET IN X-CASE $99 SP20601 • 1/4”Dr: 4 to 10mm • 1/4”Dr: 3/16 to 3/8” • 45T Ratchet • Wobble Extension Bars • 3/8”Dr: 10 to 19mm • 3/8”Dr: 3/8 to 3/4” • 45T Ratchet • Flex Handle • Spark Plug Sockets • Wobble Extension Bars • Universal Joint • Adaptor 3/8Fx1/4M NORMALLY $150 12 PT 12 PT • METRIC: 22, 24, 27, 30, 32, 36, 38, 41, 46 & 50mm • SAE: 7/8, 15/16, 1, 1-1/8, 1-3/16, 1-5/16, 1-3/8, 1-7/16, 1-5/8, 1-3/4, 1-7/8 & 2” JUMBO SIZES UP TO 50mm & 2" $199 T820400 26pc 888 Series 3/4”DR Socket Set 41PC 1/4"DR METRIC/SAE SOCKET SET 50PC 3/8"DR METRIC/SAE SOCKET SET T820101 $79 T820201 $115• METRIC: 4 to 13mm • SAE: 7/32 to 1/2” • Bits set - 18pc • METRIC: 8 to 22mm • SAE: 1/4 to 7/8” • Bits set - 18pc • Ratchet • Flex Handle • Extension Bar • Ratchet • Flex Handle • Extension Bar 6 PT METRIC & SAE $369 NORMALLY 1/2"DR IMPACT Tamper Spline SOCKET SET $1098pc METRIC • 4x 44mm (L): M12, M14, M16, M18 4x 77mm (L): M12, M14, M16, M18 SP20385 INHEX1/2”DR DEEP INHEX IMPACT SOCKET SETS 9pc METRIC • 4, 5, 6, 7, 8, 10, 12, 14 & 17mm SP20370 9pc SAE • 3/8 to 15/16 & 1" SP20375 IMPACT SOCKETS 11
SP HAS A FULL RANGE OF SPANNER SETS TO SUIT ANY APPLICATION • Small head profile designed for working in confined spaces • Tough triple chrome, high polish finish • Chrome Vanadium Steel (Cr-V) WATCH THE RANGE INFO VIDEO CHECK OUT OUR YOUTUBE CHANNEL FOR HELPFUL VIDEOS www.youtube.com/sptools QUAD DRIVE OPEN END SP Tools patented QUAD DRIVE end offers 4 times the gripping power of a standard ROE spanner by wrapping around the fastener and maximising the contact on the flat sides of the fastener head, not the points. PATENTED MAXIMUM CONTACT Spanner heads make contact on the flat sides of the fastener head, not the points. FLAT DRIVE TECHNOLOGY Perfectly flat spanner head surfaces allow for maximum contact between the spanner and the bolt or nut, maximising grip and enhancing applied torque. SP FLAT DRIVE SPANNER HEAD REGULAR CONTACT AREA METRIC & SAE SET AVAILABLE Flex Head Flare Nut SPANNER SETS $189 $189 4pc SAE • 3/8 to 7/8" SP10194 4pc METRIC • 10 to 22mm SP10144 $225 $23512pc METRIC • 8 to 19mm SP10212 12pc SAE • 5/16 to 1" SP10262 METRIC & SAE SET AVAILABLE GEAR DRIVE ROE QUAD DRIVE SPANNER SETS 0° OFFSET $285 $20511pc METRIC • 8 to 19mm SP10131 8pc SAE • 5/16 to 3/4" SP10188 METRIC & SAE SET AVAILABLE GEAR DRIVE ROE QUAD DRIVE SPANNER SETS 0° OFFSET $245 $2259pc METRIC • 8 to 19mm SP10109 8pc SAE • 5/16 to 3/4" SP10158 METRIC & SAE SET AVAILABLE GEAR DRIVE ROE QUAD DRIVE SPANNER SETS 15° OFFSETREVERSIBLE $375 $3558pc METRIC • 20 to 32mm SP10118 7pc SAE • 13/16 to 1-1/4" SP10167 METRIC & SAE SET AVAILABLE GEAR DRIVE ROE QUAD DRIVE SPANNER SETS 15° OFFSETREVERSIBLEJUMBO SIZES $259 $2498pc METRIC • 8 to 19mm SP10628 6pc SAE • 5/16 to 3/4" SP10676 METRIC & SAE SET AVAILABLE GEAR LOCKING FLEX HEAD BOX DOUBLE RING REVERSIBLE 11PC METRIC GEAR DRIVE ROE QUAD DRIVE SPANNER SET $269 SP10111 • 8, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm REVERSIBLE $419 $3298pc METRIC • 20 to 32mm SP10318 7pc SAE • 13/16 to 1-1/4" SP10367 METRIC & SAE SET AVAILABLE FLEX HEAD GEAR DRIVE ROE QUAD DRIVE JUMBO SIZES SPANNERS 12
GEAR DRIVE RING END SP Tools patented GEAR DRIVE spanners are precisely machined with deeper gears for greater torque loading and reliability with 72 teeth that only require 5° of space per turn. Dual FLAT DRIVE RING END SP Tools RING END spanners feature dual flat drive ring ends, making them the perfect spanner for getting to and loosening those tricky, hard to reach, often worn fasteners by increasing the contact area with the nut or bolt head. E-TORX SOCKETS - 12 PIECE • E4, E5, E6, E7, E8, E10, E11, E12, E14, E16, E18, E20 E-TORX SPANNERS - 4 PIECE • E6xE8, E10xE12, E14xE16, E18xE20 16PC 3/8"DR E-TORX SOCKET & SPANNER SET TORX E Cr-V STEEL 125 SP20210 METRIC & SAE SET AVAILABLE Double RING Long SPANNER SET 40° Offset $ $ 5pc SAE • 5/16 to 15/16" SP10185 6pc METRIC • 8 to 19mm SP10136 9pc METRIC 16pc METRIC • 6 to 24mm T810016 QUAD DRIVE ROE COMBINATION SPANNER SET 15° OFFSET STUBBY SIZES METRIC & SAE SET AVAILABLE QUAD DRIVE ROE COMBINATION SPANNER SETS 15° OFFSET $375 $35510pc METRIC • 24 to 50mm* T810020 7pc SAE • 15/16 to 2’’* T810070 METRIC & SAE SET AVAILABLE PREMIUM SHIFTERS ADJUSTABLE WRENCH SET 888 SERIES 3 PIECE $120 SP18093 15” Construction Adjustable Wrench $55 T818000 $169 $122 QUAD DRIVE ROE COMBINATION METRIC/SAE SPANNER SET 18 PIECE SET INCLUDES: • METRIC: 8 to 19mm • SAE: 3/8" to 7/8" $259 NORMALLY $199 SP10001 15° OFFSET *SPTOOLS.cOm fOr SIzES INcLudEd 13
FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT BALL DRIVE ON METRIC & SAE SETS $35 EACH COLOUR CODED 9PC KEY SETS - STUBBY Series AVAILABLE IN METRIC, SAE & TORX METRIC SAE TORX • 1.5, 2, 2.5, 3, 4, 5, 6, 8 & 10mm • 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16 & 3/8” • T10, T15, T20, T25, T27, T30, T40, T45 & T50 SP34531 SP34532 SP34537 BALL DRIVE ON METRIC & SAE SETS9PC KEY SETS - LONG Series COLOUR CODED METRIC SAE TORX TAMPER TORX • 1.5, 2, 2.5, 3, 4, 5, 6, 8 & 10mm • 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16 & 3/8” • T10, T15, T20, T25, T27, T30, T40, T45 & T50 • T10, T15, T20, T25, T27, T30, T40, T45 & T50 T834511 T834512 T834517 T834518 • Metric: 10pc 1.5 to 7mm • SAE: 10pc 1/16 to 1/4” • Torx: 10pc T8 to T45 30pc Bit SeT $25 SP39600 $13 SP39609 $95 SP39610 37PC BIT SET PROFESSIONAL INCLUDES • Hex, Spline, Torx & Ribe Bits • Extension Bit Holder • 3/8” Dr Bit Adaptor • 1/2” Dr Bit Adaptor 9pc 2-in-1 Rotatable RATCHET Driver WITH 1/4” Bit Set $19 SP39630 CONTENTS • 6 x Slotted • 6 x Phillips • SVCM steel shafts for strength and durability • Magnetic tips • Includes stubby sizes 13pc 888 SERIES SCREWDRIVER SET IN CASE • 8 x Slotted • 5 x Phillips 22pc SCREWDRIVER SET IN X-CASE STANDARD, GO-THRU & PRECISION • 6 x Slotted • 2 x Go-Thru Slotted • 3 x Precision Slotted • 6 x Phillips • 2 x Go-Thru Phillips • 3 x Precision Phillips $127 T834025 $90 SP34050 8pc TORX SCREWDRIVER SET IN X-CASE • Essential in the removal of Torx Tamper proof safety screws • Chrome Vanadium Steel (SVCM) shafts • T8, T10, T15, T20, T25, T27, T30 & T40 $26 T834000 12 pIECE SCREWDRIVER SET IN EVA FOAM $139 SP34003G SCREWDRIVERS BIT SETS HEX KEYS $29 NORMALLY SPTOOLS.COM HAND TOOLS 14
HIGH LEVERAGE 3pC Plier & Cutter SET • Forged chrome Vanadium (Cr-V) Steel blades • Combination Pliers • Long Nose Pliers • Diagonal Cutters 200 mm (8") $99 SP32903 MODEL SIZE PRICE SP32601 125mm $20 SP32603 250mm $26 AVAILABLE IN 2 SIZES MODEL SIZE PRICE SP32612 125mm $25 SP32613 175mm $26 AVAILABLE IN 2 SIZES MODEL SIZE PRICE SP32621 150mm $25 SP32623 225mm $29 AVAILABLE IN 2 SIZES CURVED JAW STRAIGHT JAW LONG NOSE LOCKING PLIERS • Non-slip jaws • Easy quick-release lever with non-slip rubber coating • Extended cutting blade • High leverage • Non-slip serrated blades • Heavy duty forged chrome molybdenum (Cr-Mo) handles AVIATION LONG SNIPS Straight Cut $25 SP32260 39 T832910 SIZES: • 250mm • 300mm MODEL SIZE PRICE SP30335 1276g/45oz /2.8lbs $19 SP30352 1503g/53oz/3.3lbs $23 SP30370 1985g/70oz/4.3lbs $30 HAMMERS 7pc PIN PUNCH SET 5pc COLD CHISEL SET 7pc TAPER PUNCH SET CHISELS INCLUDES • 2, 3, 4, 5, 6, 8 & 10mm • Designed to drive out pins and rivets SET INCLUDES • 12, 16, 20, 24 & 29mm • Suitable for cutting and scoring steel SET INCLUDES • 1, 2, 3, 4, 5, 6, & 8mm • For driving out rivets/pins, free frozen nuts and remove bearings $85 SP30831 $95 SP30821 $59 SP30921 RIVETER 5 pIEce TUNGSTEN CARBIDE BURR SETS $129 INCLUDES • 10 x 20mm - Cylinder • 10 x 20mm - Cylinder - Radius Top • 8mm Dia. - Ball • 10 x 25mm - Tree - Radius Top • 12 x 20mm - Oval MODEL APPLICATION SP31380 Steel SP31385 Aluminium • Heavy duty, superior cutting power • Ideal for deburring, carving, grooving, shaping & finishing • Spring loaded handle for automatic ejection of mandrel HACKSAW - 12" $30 SP35100 • Quick blade change • 95mm throat • 90°/45° blade settings MODEL SIZE PRICE SP30163 340g/12oz/.75lbs $17 SP30167 454g/16oz/1lbs $18 SP30175 680g/24oz/1.5lbs $21 SP30183 907g/32oz/2lbs $23 MODEL SIZE SP30372 3.6kg / 128oz / 8lbs SP30374 4.5kg / 160oz / 10lbs CUTTING
Wire
cutting notch $39 EA PLIERS SIMPLY PURCHASE AN 'APPRENTICE CASH' MARKED PRODUCT AND RECEIVE AN ONLINE VOUCHER TO SPEND AT WWW.SPTOOLS.COM ARE YOU AN APPRENTICE?APPRENTICE CASH REDEEMING IS QUICK AND EASY. VISIT OUR APPRENTICE PAGE AT SPTOOLS.COM FOR MORE INFORMATION Visit sptools.com for full terms & conditions. 15
FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT 8 STAGE - 26 AMP MULTI VOLT - 6, 12 & 24V LEAD ACID, GEL, AGM & LITHIUM SMART BATTERY CHARGER $299 SP61086 $120 SP61060 $299 SP61065 batteries, including ordinary lead acid battery, AGM flat plate battery, AGM spiral battery, and Gel batteries Premium Battery ANALYSER WITH BUILT-IN PRINTER • Auto-saving function ensures the latest test results are automatically saved for reviewing • Tests batteries & charging/ starting systems • Easily adjustable date/ time printing mode • Simple interface • Circuit protection • Reverse polarity connection protection • 12v 250 - 700AMP Jump start (Petrol engines up to 5L V8 & Diesel up to 3L) (approx. double normal laptop battery life) • 12v Port for powering or charging 12v accessories • 5v USB Port for charging mobile phones, tablets & cameras (approx. 4 full mobile phone charges per charge) KIT INCLUDES Jumper cables, USB to various electronic device input connectors, 12V10A DC adapter cable, 12v car charger, Charger & Storage case 700A LI+ POWER BANK JUMP STARTER THE PORTABLE POWER SUPPLY FOR ANY JOB. JUMP STARTS ANY CAR, TRUCK OR MOTORCYCLE. POWER OR CHARGE 12V ACCESSORIES AND ANY USB 5V ELECTRONICS. $199 SP61071 Memory Power Supply BATTERY TERMINAL SPREADER Mechanics Stethoscope INSULATED Crimping Tool and Wire Strippers Inline Ignition Spark TesteR QUICK CHANGE RATCHET CRIMPER KIT - 4 PIECE Radio Removal Tools • Retains setting of computers, radios, clocks, etc. • An essential diagnostic tool for fault finding in vehicle engines and engine bays, under-body, transmissions, differentials & bearings $39 SP62001 149 SP32287 $21 SP61054 • Checks whether there is high tension spark potential at the spark plug • Ideal for modern vehicles with sensitive electronics • Easy to useRemove rubber boot from spark plug, insert inline tester & place tester boot on plug. Insulated ergonomically designed handles • Kit comes with dies to suit insulated terminals, non-insulated terminals & spark plug connectors. • Dies quickly slide in and slide out • Quick release action • Ideal for any crimping Job • 225mm (8.8”) Automatic wire stripper with crimper features • 4.0mm Insulated & Open Barrel • Terminal Crimper • Wire cutter: 1.25, 2.0 & 5.5mm • ISO: M2.6, M3, M3.5, M4, M5, • Wire stripper: 0.75, 0.9, 1.25, 2.0, 3.5, 5.5mm CRIMPING TOOLS / WIRE STRIPPERS $249 NORMALLY $365 NORMALLY SPTOOLS.COM ELECTRICAL & DIAGNOSTIC 16
READS & CLEARS GENERIC & MANUFACTURER SPECIFIC DIAGNOSTIC TROUBLE CODES (DTC’S) & TURNS OFF CHECK ENGINE LIGHT. MAKE SURE YOUR VEHICLE IS CAN OBDII/EOBD/JOBD COMPLIANT BEFORE PURCHASING CAN OBDII/EOBD/JOBD SCANNER CODE READER • Covers all OBDII compliant vehicles: Made in USA from 1996 on; Made in Europe petrol 2001 on & diesel 2004 on; Made in Australia or New Zealand from 2006 on. (Including the CAN, J1850 PWM, J1850 VPW, ISO9141 and KWP2000 protocols) • Compliant with OBDII 16 PIN Toyota, Honda, Daihatsu, Mitsubishi, Mazda, Nissan, Suzuki & Subaru • Wider vehicle coverage with CAN protocol support • Supports multiple trouble code requests: Generic codes, pending codes and manufacturer specific codes • Code definitions are displayed on unit screen • Reviews the emission readiness status of OBDII Monitors $225 SP61155 WATCH THE DEMO VIDEO CIRCUIT TESTERS • Sharp, short, • Automatic voltage identification with blue for 12V and red for 42V systems • Safe for low current circuits since tester only draws 3 milliamps at 12V • Safely tests standard primary DIGITAL DISPLAY Circuit Tester General & Hybrid Circuit Tester Computer-Safe Circuit Tester 3 to 32v 12 to 42v NO EARTH LEAD $99 SP61018 $49 SP61015 $29 SP61020 • Insulation piercing contact • 850mm cable • Crocodile clip 888 SERIES Circuit Tester 3 to 24v $9 T861010 $69 SP61017 • Digital LCD display provides a fast and accurate reading • Dual colour LED indicator $99 SP62022 • LCD Display with Backlight • Single Dot Laser Targeting • Low battery Indication • Auto Power Off • -20°C/ 270°C Range (-4 °F – 518°F) Mini Infrared Thermometer • Continuity • Back Light • Data Hold • AC/DC Voltage • DC Current • Resistance • Diode Test • Transistor Test Digital Multimeter CAT II 600V • 2000 counts digital display • Safety Design Cat 3 600v • Non-contact ACV detection • Type K temperature input • Continuity, diode test, resistance Digital Multimeter with Temp Gauge • Laser target • LCD display with backlight • Range: 100-30000rpm, 1.7-500rps • Protective cover & carrying case • Auto power off • Accuracy: +/-0.1% Tachometer Digital MULTIMETERS CHECK OUT THE DEMO VIDEO Adjustable Advance Timing Light Timing Light Professional $85 SP62015 $29 SP62012 $189 SP62032 TIMING LIGHT • Quickly tune-up cars, trucks, marine and recreational vehicles • Works on conventional and computer controlled ignition systems • Works on adjustable, non adjustable timing systems • Testing range 0-10,000rpm • Advance degrees 0º to 60º • Four functions, digital readout & easy to read backlit LCD • Tachometer: 249 to 9,990RPM (+/- 1% Accuracy) • Advance degrees (2 & 4 cycle DIS and Conventional): 0° to 90° (+/-.5° Accuracy) • Dwell: 0° to 180° / 2-12 cylinders (+/-1% Accuracy) • Voltage: 10 to 16 volts DC (+/- 1% Accuracy) 17
FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT • Plugs the transmission shaft opening when removing the drive shaft, repairing the U-Joints or performing general transmission service. • Tapered Design suits most vehicles $129 SP66070 $149 SP66027 Valve Spring Compressor $35 SP66020 • Easy clip over design • Simple push under fitting until hose releases • Supplied with tightening arm • Double band adjustable tensioner AC & FUEL LINE DISCONNECT SET Deluxe Engine Oil Pressure Tester $19 SP64036 • 0.008” – 0.026” • Marked with equivalent metric sizes • Offset blades 100mm long x 13mm wide • 25mm offset tips FEELER GAUGE SET 12PC 50 TO 125 mm 1/2"Dr Impact Bar Cylinder Leak Detector & Crank Stopper • Checks cylinder compression from 0-300psi (0 to 21kg/cm2) • Assembles to form either push in or screw in type testers • Screw in adaptors include: M10 x 1.0, M12 x 1.25, M14 x 1.25 & M18 x 1.5 • Crank stopper locks engine in place to facilitate installation of timing belts & removal of harmonic balance pulleys • Gauges show % of cylinder leakage & cylinder pressure DELUXE Petrol Compression Tester • Dual gauge readings: 0 to 300psi (0 to 21 Bar) • Oil proof hose: 24” (600mm) • Includes 1/4”NPT, 3/8”NPT, 1/2BSP, M10x1.0, M12x1.5, M14x1.5, elbow adaptors & 50mm nipple & coupling CHECKS BOTH CARS & TRUCKS • Suits oil filters up to Ø300mm (12”) • Satin finish cast steel body with 3/8” & 1/2” sq drives • Extra wide nylon webbing strap Oil Filter Wrench $59 SP64012 TRUCK STRAP TYPE 55 SP66023 PETROL • 2.5’’ gauge with dual scale, 0-300psi, 0-21kg/cm2, 0-300psi • Pressure relief valve allows repeated on-vehicle test • Includes multiple adaptors to fit most applications Compression Tester Extraction Syringes • Multi-purpose - ideal for the transfer of oils/ fluids to and from vehicle components such as gearboxes and differentials. • Translucent body allows easy inspection of oils and fluids. SIZE PRICE 200ml $39 1500ml $79 $39 FROM OIL EVACUATION SYSTEM 10 LITRE $125 SP66015 $329 NORMALLY $259 NORMALLY $200 NORMALLY SET INCLUDES: • Small cup dia. 5/8” & 13/16” • Large cup dia. 1-1/8” & 1-3/8” SPTOOLS.COM ENGINE SERVICE 18
VACUUM TEST & BRAKE BLEEDING KIT • The complete kit for all vacuum testing and brake bleeding requirements • Hand held vacuum pump – compact design • Allows fast efficient static testing and monitoring Vacuum brake bleedeR 800 • Automatically refills brake fluid reservoir during brake bleeding • Retaining clip provides positive clamping to all master cylinder reservoir types • Height adjustment maintains correct fluid level; prevents running brake fluid reservoir dry • On-off tap PLUS BRAKE FLUID RESERVIOIR RE-FILLER • Uses compressed air to generate deep vacuum to bleed old fluid and air from hydraulic brake systems • Compact size allows easy operation within wheel arch area • Universal rubber fitting holds securely on brake bleed screw • Quick connect coupler for hose interchange as required • Convenient hanging hook and quick release trigger allows hands-free operation BRAKE FLUID RESERVOIR RE-FILLER - 600ML $255 SP70854 90° Offset of brake piston • Suits front disc brakes on most cars and light trucks. $20 SP63002 This compact LED brake fluid tester is a quick & effective wayof testing if a vehicles brake fluid needs replacing by showing how much moisture has been absorbed into the brake fluid. BRAKE FLUID TESTER $89 SP63028 $25 SP63041 • Versatile hone for 32mm90mm diameter cylinders • Handy pack of 3 clamps containing small, medium and large clamps to cover hose sizes from 3mm to 57mm • Smooth Rounded Edges on Jaws will not Damage Internal Hose Linings • Lightweight, Non Conductive, Highly Visible Material HI-VIS MODEL SIZE PRICE SP70036 Small $10 SP70534 Medium $11 SP70685 Large $13 SMALL: Seals 3 to 8mm MEDIUM: Seals 13 to 19mm LARGE: Seals 19 to 57mm • Tube diameter cutting range: 3mm - 22mm (1/8” to 7/8” • Ideal for cutting hard and soft copper, aluminium, brass and plastic tubing TUBE CUTTER - 3 TO 22mm AVAILABLE IN 3 SIZE SETS Brake Piston Rewind Kit (RH-LH) 18 PIECE • Aids in the rewinding of the pistons in brake calipers without damaging the piston gaskets/seals when replacing brake pads. • Includes both left & right handed thrust bolt assemblies SP63005 SUITS PIPE SIZES • 5, 6, 8, 10, 12, 14 & 16mm METRIC SP63015 SAE SP63016 SUITS PIPE SIZES • 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 & 5/8” • Aluminium alloy casting tube cutter from 3-30mm • 7pc adaptor • Steel casing, yoke & screen bar DOUBLE FLARING TOOL KITS $79 EACH $19 SP63037 $35 SP66050 NORMALLY $129 $135 NORMALLY • Provides two size bend options for accurate and safe shaping of automotive brake pipes, up to 5mm in diameter. • Compact ergonomic design, suitable for one-handed operation in tight confined spaces. BRAKE PIPE BENDING TOOL UP TO 5mm Dia. BRAKE & CLUTCH SP EASY CREDIT CAN HELP YOU FINANCE YOUR SP TOOLS PURCHASE OVER THE COMBINED VALUE OF $1000 AND REPAYMENTS START FROM AS LITTLE AS $8 PER WEEK*. APPLY NOW AT SPTOOLS.COMREPAYMENTS START FROM ONLY $8 PER WEEEK OWN QUALITY TOOLS AND EQUIPMENT TODAY AND PAY THEM OFF WEEKLY! 19
COOLING SYSTEM FLUSHING GUN • Multi-purpose cleaning gun uses a combination of high pressure compressed air and water to quickly clean dirt, scale etc. from the cooling system $79 SP70801 HOSE CUTTERS - 75mmHOSE CUTTERS - 42mm PLASTIC & RUBBER $95 SP63046 $25 SP63043 DIGITAL FLEX HEAD TORQUE WRENCHES • Flex Head Ratchet - The ultimate in confined space convenience • Range: Nm, in-lb, ft-lb, kg-cm, “ ° “ • Calibrated for both Clockwise and Anti-Clockwise use • Warning LED’s and audible alarm sounds within 10% of target value • Automatic torque value compensation for flex head angle deviation • Selectable Torque Functions: Peak mode & Tracking mode • Angle function: 0° to 360° (+/- 2% accuracy) ONE-STEP TORQUE-ANGLE • 0-10mm dial indicator • Graduation: 0.01mm • High sensitivity • Attaches horizontally or vertically to flat surfaces • V groove base mounting on cylindrical surfaces • Fine adjust arm and solid knobs • Flexible, precise rotary joints adjust any direction • Powerful magnetic base with on/off switch • 60kg magnetic pulling force Dial Indicator MAGNETIC STAND ADJUSTABLE SUITS DIAL INDICATORS $90 SP35691 $59 SP35697 FLEX HEAD MEASURING IDEAL FOR REPLACING LOWER RADIATOR HOSES AND FITS MOST SIZE CLAMPS • Fitted with 630mm long cable • For clamp dia. from 18mm to 50mm (approx) Flexi Hose Clamp Plier $99 SP72604 • Compound ratchet action • Finds internal & external cooling system leaks • It includes a selection of radiator cap adaptors, header tank adaptors and radiator cap tester adaptors to test all aspects of the cooling system • Heavy duty pump with test range 0 - 2.5bar. 21pc COOLING SYSTEM PRESSURE TEST KIT • Eliminates the need for adapters to pressure test the cooling system • Universal attachment to radiator or header tanks • Fits bayonet and threaded filler necks • The patented inflatable bladder attaches to radiator or header tanks for system testing • Eliminates the need for adapters to pressure test the cooling system • Identifies cooling system pressure leaks • Includes 6 double end radiator cap testers Cooling System Pressure Tester DELUXE Cooling System Pressure Tester $359 SP70750 $349 SP70889 $279 SP70800 PLUS $100 TRADIE CA$H MODEL DRIVE LENGTH RANGE PRICE SP35256 3/8” 470mm 6.8-135Nm $699 SP35357 1/2" 680mm 10-200Nm $699 SP35358 1/2" 680mm 17-340Nm $799 TORQUE TARGET ALARM Audible click for when torque target is reached COOLING SERVICE 20
• Used to spread the steering knuckle to enable the removal and refitting of shock absorbers without the risk of damage to the knuckle • Vehicles include: Audi, BMW, Citroën, VW, Ford, Skoda, Seat, Renault, Peugeot and most Japanese vehicles. Universal Knuckle SpreadeR $89 SP70970 10pc Bearing Race & Seal Driver Set • Designed to allow operator to install bearing cases & seals without damage • Ideal for installing wheel bearing outer races • 39.5mm – 81mm $129 STUD REMOVAL/INSTALLATION TOOL Screw Extractor Set - 5pc $59 SP31251 $ SP31302 $19 SP67250 $159 SP67038 2pc Strut NUT Bit Socket Set Bearing SeparatorS Coil Spring Compressor SET MASTER Puller sET Tie Rod End Puller & Pitman Arm Puller• 3/8”Dr x 45mm Long • 5x7mm & 5.5mm x 8.2mm Pry Bit (Double “D”) Sockets are used on semi-strut clamp castings fitted to Audi, VW, BMW, Citroën, Ford, Seat, Skoda, Peugeot, Renault and Japanese vehicles • Wrap over coil claws for extra safety • Uses twin prongs and works at a pressure up to 1100kgs • Maximum jaw opening: 230mm • 1-1/16” opening, 1-3/4” pull • 27mm opening, 44mm pull $29 SP67031 • Easily remove gears, pulleys, bearings, sprockets and flywheels from shaft without damage • Inside & outside reversible hooked jaws • Twin hole reversible arms GEAR PULLERS - 2 JAW • Designed to remove bearings & gears where access is available behind the item • Drop forged hardened alloy steel MODEL SIZE SP67062 30-50mm SP67063 50-75mm SP67064 75-105mm AVAILABLE IN 3 SIZES • Ideal for pulling harmonic balancers, steering wheels, vibration dampers, crankshaft pullers and gears • Capable of handling almost every 2 or 3 way bolt pull possible on almost every car, pickup, SUV and small engine • Set Includes: Two/three way yoke, 4pc tips, Metric & SAE bolt sets & 2pc centre screw for pullerMODEL SIZE PRICE SP67003 75mm $35 SP67004 100mm $48 SP67006 150mm $65 SP67008 200mm $99 AVAILABLE IN 3 SIZES $35 FROM • Suitable for various sizes of studs • Cam rotates to grip onto the stud for quick and easy use • Remove broken studs, screws, bolts etc • 1/8”, 3/16”, 15/64”, 5/16” & 3/8” • Tapered spline CAPACITY: 10-19mm (3/8”- 3/4”) SCREW EXTRACTOR SET DRILL BIT & GUIDE 25 PIECE • For extracting broken screws, studs & bolts: 5mm to 16mm INTERNAL & EXTERNAL THREAD FILES INDIVIDUAL • Restores any diameter damaged left or right-hand external threads • Includes easy slip-on PVC grip MODEL SIZE PRICE SP31305 0.75, 1, 1.25, 1.50, 1.75, 2, 2.50, 3 $70 SP31306 11, 12, 13, 14, 16, 18, 20 & 24 TPI $70 SP31307 9, 10 , 12, 16, 20, 27, 28 & 32 TPI $70 $65 SP31320 • For use on most cars and light trucks to remove tie rods from shock absorber links ball jointBALL JOINT SEPARATOR MODEL SIZES SP67020 19mm SP67021 24mm $21 EACH • For use with grease guns, the design incorporates grease nipple at one end which easily adapts to the grease gun coupler UNIVERSAL BEARING PACKER $25 SP30818 THREAD REPAIR PULLERS STEERING & SUSPENSION 21
FLUID TRANSFER LUBRICATION PANEL STARTER KIT $249 SP30205 TOOLS INCLUDED 7PC PANEL BEATING SET • Includes pick & finish hammer, bumping hammer, pein & finishing hammer, double end hand dolly, curved dolly, utility dolly & heel dolly 4PC TRIM REMOVAL SET • Removes hole plugs, window, door, sunroof & rubber joints, mirrors, windshield wipers + more 2PC DOOR UPHOLSTERY CLIP REMOVER SET • Small Clips: 5 to 7mm • Large Clips: 6 to 9mm RETRACTABLE UTILITY KNIFE • Multi stop blade positioning DEAD BLOW HAMMER • 907g / 32oz / 2lbs • Rebound dampening shot filled head - No recoil THE PERFECT PANEL BEATING AND TRIM REMOVAL SET FOR ANY WORKSHOP, FEATURING THE MOST COMMONLY USED DOLLIES, HAMMERS, TRIM REMOVERS AND UTILTY KNIFE - YOU’LL BE WELL EQUIPPED TO HANDLE THE VAST MAJORITY OF PANEL AND TRIM REPAIRS. $29 SP30879 Right Angle Coupler Quick release grease couplers - 74 & 130mm, needle nose & seal-off grease dispensers, injector needle & right angle adaptor 6pc COUPLER & ACCESSORY KIT Mini Grease Gun Set • Working pressure: 1000psi • Capacity bulk: 80ml • 3 inter-changeable tips • 100g tube of grease included REPLACEMENT GREASE TUBE AVAILABLE $12 SP65104G Multipurpose Pump 1 LITRE • Great for top up jobsquicker and easier • Ideal for topping up difficult to access oiling points on motor vehicles, lawn mowers, chain saws, outboard and two stroke motors, and other odd jobs around the workshop and home DRUM PUMP GEAR OIL PUMP 20 LITRE • Ideal for transferring non-corrosive fluids of light to medium viscosity, such as engine oil, gear oil, transmission fluid, machine oil, etc. • Flow: 60ml / stroke • Ideal for transferring non-corrosive fluids of light to medium viscosity, such as engine oil, gear oil, transmission fluid, machine oil, etc. • Ideal for transferring non-corrosive fluids of medium to heavy viscosity, such as engine oil, gear oil, transmission fluid, automotive additives, machine oil and lubricant • Spring operated pump and unique swivelling pump head assembly allows the hose to follow the operator • Gun holder to ensure the extra oil flows back into the • Flow: 60ml / stroke $33 SP65155 $65 SP65156 $99 SP65157 $75 SP65162 IN-LINE SWIVEL JOINT QUICK RELEASE COUPLER • 20” flexible hose • Cast aluminium body • 4 jaw super grip coupler • Bleeder valve for purging air • 2-way loading: Bulk or 450cc grease cartridge VARIABLE STROKE GREASE GUN $159 SP65108 $39 SP65104 $169 SP65140 $20 SP65132 $69 SP65137 $29 SP65134 SPRING GEAR OIL PUMP 60 LITRE • Dual tipped flexible and highly durable picks and pry bars • Ideal for prying apart key fobs, dashboard parts and air vent assemblies, removing o-rings, small seals, gaskets and clips as well as uniformally smoothing epoxy, adhesives and silicone • Non-marring premium Nylon 6pc MULTI-PURPOSE PRECISION TRIM & SEAL KIT DOOR UPHOLSTERY CLIP REMOVERS $39 SP30878 REMOVES PLASTIC PUSH PIN RIVETS $155 NORMALLY PANEL & TRIM 22
HOOKS & PICKS PICK-UP TOOLS & INSPECTION MIRRORS Magnetic Pick-Up Tool - Telescopic PICK-UP TOOL SWIVEL HEAD Magnetic Pick-Up Tool - Telescopic WITH CLEANING NEEDLE MODEL LIFT EXTENSION PRICE SP31502 1kg 185 - 840mm SP31503 2.3kg 180 - 800mm SP31513 6.8kg 190 - 760mm 4pc INSPECTION MIRROR & PICK-UP TOOL SET $35 SP31490$19 FROM • Strong & lightweight stainless steel shafts • PVC cushion handle EXTENDABLE $19 SP31500 $4 $11 SP31507 • 0.7kg magnetic pickup tool • Extension handle197 to 413mm • Soft handle • Swivel head MODEL SIZE SP31401 32mm AVAILABLE IN 3 SIZESSWIVEL CLEANING NEEDLE • 1x Rubber hook • 1x Glass run cleaner • 1x Angular hook • 1x Long hook 4pc HooK & Pick Set 2pC O-RING & SCRIBE SET • Both tools facilitate easy removal & installation of O-rings & seals, scribing, carving & part placement • Combination pick and hook pick • 90° pick and straight pick hatchbacks & car boots to enable worn gas struts to be fixed in the extended position • Industrial Strength Chrome Vanadium Steel (Cr-V) steel • Adjustable head with up to 15 locking positions (406mm - 11 locking positions) • Indexable to over 180° allowing more leverage in confined spaces. 2pc INDEXING JAW PRY BAR SET PRY BARS SCRAPERS • Go-Thru blade with striking cap allows hitting the bar with a hammer without damage to the handle • Ideal for prying cylinder heads, manifolds, gearbox components etc. $20 SP30808 $55 SP30842 • Heavy duty alloy steel blades - 400mm • Heavy duty handles with comfort grip • Includes 20, 22, 25 & 38mm scrapers • Tough composite construction • Remove decals, mouldings, emblems, gaskets & wheel weights from cars without damaging the vehicle 4PC Poly SCRAPER SeT $24 SP30813 • Precision ground blades • Heavy duty timber handles • 10, 15 & 23mm blades Stainless Steel Scraper Set 3 pIECE $59 SP30805 MAGNETIC Holder Scratch free, powerful magnetic back plate allows holders to stick to steel tool boxes, roller cabinets, etc PLUS BONUS AUTO SPECIALITY 23
FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT INCLUDES: Trigger, Turbo nozzle lance, Variable spray nozzle lance, Patio cleaner, Rotary brush, 10m HP double steel braided hose with storage reel, Removable built-in detergent tank A highly concentrated range of specialised heavy duty detergents to suit any application. Each one penetrates, lifts heavy grime and oil and easily cleans even the 2LSPECIALISED DETERGENTS MODEL APPLICATION ARGPC2 General Purpose AROTC2 Outdoor Timber $12.99 EACH • Max Pressure: 4000psi • Flow Rate: 23.4 Litres p/min • Power: 15Hp Torini Engine • 6.5 Litre fuel tank • Ceramic coated stainless steel pistons - Able to use sea water COMMERCIAL • Max Pressure: 3600psi • Flow Rate: 11.3 Litres p/min • Power: 6.5Hp Torini Engine • 3 Litre fuel tank HEAVY DUTY • Full metal lance with quick connect • 5 quick connect nozzles - 0°, 15°, 25°, 40° & detergent nozzles • Turbo nozzle • 10m steel braided hose with quick connect fittings • Inlet water filter PRESSURE WASHERS INCLUDE: PETROL PRESSURE 2500PSI • 2500 Max PSI • 9.7L/min • 5.5Hp Torini Engine • Brass head 3 axial piston pump INCLUDES: • Full metal lance with quick connect • 5 quick connect nozzles - 0°, 15°, 25°, 40° & detergent nozzles • 8m textile braided hose • Inlet water filter $599 SP250P DOMESTIC 1740PSI • Max Pressure: 1740psi • Flow: 6.5 Litres p/min • Power: 1400w $175 AR120 DOMESTIC 1885PSI • Max Pressure: 1885psi • Flow: 7.3 Litres p/min • Power: 1800w $299 AR130 HEAVY DUTY 2030PSI • Max Pressure: 2030psi • Flow: 7.3 Litres p/min • Power: 2000w $399 SP140 ELECTRIC $1795 SP400P $999 SP360P PETROL POWERED CHECK OUT THE PROMO VIDEO $695 SP160RLW • Flow Rate: 7.3 Litres p/min • Power: 2200w 2320PSI ELECTRIC PRESSURE WASHER SP400P SPTOOLS.COM PRESSURE WASHERS 24
DIESEL POWERED RELIABLE, ROBUST & EASY TO USE. NEVER BE WITHOUT POWER AGAIN INDUSTRIAL SERIES DON’T BE LEFT IN THE DARK WHEN POWER OUTAGES HAPPEN 2.8 KVA PULL START 2x 15A Outlets WHEEL KIT NOT INC. $695 SPG2800 6.5HP 4.0 KVA PULL START 2x 15A Outlets WHEEL KIT NOT INC. $975 SPG4000 7HP 6.8 KVA PULL START 3x 15A Outlets WHEEL KIT INCLUDED $1495 SPG6800 13HP 8.1 KVA ELECTRIC START 3x 15A Outlets WHEEL KIT INCLUDED $1825 SPG8100E 15HP 12 KVA ELECTRIC START 3x 15A Outlets WHEEL KIT INCLUDED $4995 SPGC12000E 20HP8.1 KVA ELECTRIC START 2x 15A Outlets WHEEL KIT INCLUDED $2475 SPGC8100E 15HP $2995 SPGD6800E 6.8 KVA Pull START 2x 15A Outlets WHEEL KIT INCLUDED 10HP CONSTRUCTION SERIES On-site Power shortage is not a problem when you have an SP Construction Series Generator. RESIDUAL CURRENT DEVICE 10 LITRE TANK 4500 Watts ELECTRIC START 2x 15A OUTLETS $1995 SPGi4500E • Torini 4 Stroke Engine • 3 in 1 Multi-function Control • Engine Smart Control (ESC) • 32 bit Inverter Core • 12 Volt Outlet • Low Running Noise from 50dB • Parallel Connection Capable INVERTER GENERATOR FEATURES: 3 MODELS AVAILABLE SINE WAVE TECHNOLOGY DIGITAL SUPER QUIET INVERTER GENERATORS 4 LITRE TANK 1800 Watts PULL START 1x 15A OUTLETSSPGi2000 $8994 LITRE TANK 2500 Watts PULL START 2x 15A OUTLETSSPGi3000 $999 $3625 NORMALLY Increased Power Output NOW EVEN MORE POWERFUL, THE NEW COMPACT AND SUPER QUIET SP 4500W (SPGi4500E) INVERTER GENERATOR IS IDEAL FOR ELECTRONIC, CAMPING, LEISURE ACTIVITIES AND TRADE APPLIACATIONS. BEST POWER TO SIZE RATIO ON THE MARKET GENERATORS 25
RATCHET WRENCH • Free Speed: 200rpm • Max Torque: 61Nm 3/8" SP-1139 1/2" SP-1139-2 AVAILABLE IN 3/8" & 1/2" • Free speed: 11,150rpm • Working Torque: 340Nm • Capacity: 6.35mm 1/4" IMPACT SCREWGUN PISTOL $199 SP-7146H $129 SP-1763 1/4” Long Nose Die Grinder STRAIGHT • RPM: 21,000 • Length: 259mm EXTENDED 479 SX-77 • Includes Pressure Gauge & Adjusting Valve HIGH PRESSURE SPRAY GUN INDUSTRIAL CHISEL GUN • Ideal for general cutting, body panel crimping, shearing, rust/paint removal, chipping and scraping. SPECIFICATIONS • Chisel shank size: 10mm • Blows per minute: 3000 • Length: 216mm • Weight: 2.18kg $229 SP-1400 CHISELS $259 NORMALLY * Chisel not included KIT INCLUDES 2” Gasket Sander, 12x Surface Prep Discs (Medium & Coarse Grit), 8x Sanding Discs (#80 & #120 Grit) SANDER FEATURES • Free Speed: 16,000RPM • Capacity: 50mm • Thread size: 6mm x 1.25mm Pitch • Multiple speed settings • Lightweight composite body GASKET SANDER KIT 2” (50mm) $199 SP-2331H SPHR15 $ ANTI-KINK PREMIUM FITTED AIR HOSE MODEL SIZE PRICE SP66-15N 15m $59 SP66-30N 30m $89 15m RETRACTABLE AIR HOSE • Heavy duty extreme flex hose • One-touch Nitto™ style couplers $26 $26 $26 $26 $9 WIDE SCRAPER 50 X 170mm FLAT BLADE 20 X 170mm PANEL CUTTER 170mm RIVET & BOLT CUTTER 20 X 170mm CHISEL SPRING RETAINER STANDARD Free Speed: 10,000RPM Length: 225mm • Perfectly balanced 3/8”DR DRILL ANGLE HEAD 295 SP-3600 $195 SP-2510AH FULL RANGE OF CHISELS TO SUIT SP-1400 HIGH PRESSURE SPRAY GUN DELUXE • Pot Size: 250ml • Max Pressure: 50PSI $39 SX-30 $209 NORMALLY • Extreme flex hose • Feed lock WALL MOUNTABLE 350 HIGH PRESSURE SPRAY GUN $69 SX60-2 PLUS BONUS AIR BRUSH KIT VALUED AT $29 • Pot size: 1L • Max pressure: 50PSI • Nozzle: 1.8mm GRAVITY FED SPRAY GUN • Pot size: 600ml • Max pressure: 50PSI AVAILABLE IN 2 NOZZLE SIZES $69 EACH PLUS BONUS AIR BRUSH KIT VALUED AT $29 MODEL SIZE SX50-1 1.4mm SX50-3 2.0mm • 3 Jaw chuck 3/16” INDUSTIAL RIVETER • Sets 2.4, 3.2, 4.0 & 4.8mm AIR TOOLS 26
• Bolt Busting Torque: 1900Nm • Industrial single jumbo dog hammer mechanism • 5 torque settings $599 SP-1157 3/4”DR IMPACT WRENCH HIGH PERFORMANCE MOTORSPORT MOTOR • Bolt Busting Torque: 970Nm • 93mm Head (including anvil). Perfect for hard to reach and confined areas • Single dog hammer mechanism • 3 torque settings 1/2”DR IMPACT WRENCH COMPACT SP-1142 $199 93mm (Including anvil) Cast Iron STATIONARY AIR COMPRESSORS 3 PHASE - 15AMP • Ideal for commercial applications • High efficiency induction motor • Resettable overload protection BELT DRIVE Twin Cast Iron AIR Compressors INDUSTRIAL • Ideal for commercial applications • Resettable overload protection BELT DRIVE MODEL HP TANK FAD CAST PRICE SP25 5.5 200L 508L/min V-Twin $2995 SP35 7.5 270L 880L/min Triple $3950 SP50 10 270L 1360L/min Triple $4500 COMMERCIAL GRADE 3360 LITRE TANK 2.5 HP 10 AMP 260L/MIN FAD $995 SP14 60 LITRE TANK 3 HP 15 AMP 318L/MIN FAD $1095 SP17 $1799 SP17P 2HP PORTABLE AIR COMPRESSOR UTE PACK • The ultimate builders companion • Able to run all nail guns • One man lift 2.5HP PORTABLE AIR COMPRESSOR TRADE QUALITY Built tough & compact - Ideal for mobile applications - Fits under Tonneau style ute lids 50 LITRE TANK 2.5 HP 10 AMP 260L/MIN FAD3 $495 SP11-12X $649 SP12-50X DIRECT DRIVE 10 LITRE TANK 2.0 HP 10 AMP 226L/MIN FAD • Take anywhere & will run several air tools at once • 6.5hp Torini OHV 4 Stroke Engine 6.5hp Cast Iron v-Twin Air Compressor PETROL POWERED 60 LITRE TANK 6.5 HP TORINI ENGINE 356L/MIN FAD PETROL DRIVEN BELT DRIVE 3 3 Air Compressor Rating in accordance with AUSTRALIAN STANDARD AS 4637-2006 DON'T BUY AN INFERIOR PRODUCT • Bolt Busting Torque: 1140Nm • Ideal for the tyre industry • 4 torque settings • Forward/reverse $347 SP-1140EX 1/2”DR IMPACT WRENCH • Stroke Length: 10mm •Length: 235mm • Includes 24T saw blade HIGH SPEED AIR SAW SP AIR SAW BLADES 10,000 STROKES PER MIN SAWC100 24 ALUMINIUM $24 PACKS OF 5 $129 SP-313 $279 SP-2680 $199 SP-1900 Per Pack 1/8" Micro Air Grinder • Free speed: 70,000rpm • Length: 156mm 970Nm BOLT BUSTING TORQUE COMPRESSORS 27
All prices include GST. Not all products in this brochure are available from all outlets. Prices may vary in some country areas due to freight costs. All products in this brochure were available at the time of printing. Austech Industries will do everything possible within reason, to maintain stocks of products advertised but cannot be responsible for unforeseen shortfalls beyond their control. E & OE Copyright. WWW.SPTOOLS.COM Please note: Images are for illustration purposes only, contents and colours may vary. While Austech Industries makes every reasonable effort to ensure the accuracy and validity of the information provided. Pricing and specifications are continually changing, Austech Industries reserves the right to change at any time without notice, the information contained in our Trade Catalogues, Promotional Brochures, Catalogues and all such print media, and makes no warranties or representations as to its accuracy. YOUR LOCAL STORE: 230° WIDE ANGLE FLOODLIGHT Illuminates entire field of view SMART MULTI VOLT 8 STAGE BATTERY CHARGER - 15 AMP 6,12 & 24V NEW PRODUCTS • Current Output: 15 Amp • Output Voltage (Nom): 6, 12 & 24V LEAD ACID • GEL • AGM • LITHIUM • Ideal for automotive, industrial and trade use • Heavy duty aluminium body • 390mm Spiral protected flexible rubber hose • Dual chuck with 360° Swivel PROFESSIONAL CONVEX LENS GAUGE TYRE INFLATOR/ DEFLATOR PRESSURE RANGE: • 0-150 PSI • 0-10 Bar • 0-1050 Kpa DUAL CHUCK MULTI SCALE 12v Mechanics Power WRENCH Combo Kit • Rapid, mess-free, transfer of Petrol, Diesel, Kerosene, oil, Water (non potable) and other non-corrosive liquids. • Durable battery operated impeller pump transfers up to 13 Litres (3.5 Gallons) of liquid per minute • 60cm flexible tubing and 30cm extended reach suction pipe • Runs on 2 x 1.5V D Alkaline batteries NEW NEW NEW KNEELING PAD • Reduces knee and lower back pain from kneeling on hard surfaces 550 x 320 x 22mm Ideal for mechanics whose hands are usually greasy/oiley SMART ON/OFF MOTION SENSOR Dual Light COB LED SLIMLINE HEADLAMP MOTION SENSE ON/OFF LUMENS 350 LUMENS 120 LUMENS 120 LUMENS 45 FLOODLIGHT FLOODLIGHT SPOT LIGHT SPOT LIGHT • Ultra bright, ultra wide 5w COB LED Floodlight • Ultra lightweight, sleek, slim, low profile design (weighs 72 grams) • Includes a high power side beam spot light • Size: 290 x 32 x 25mm $39 SPR30 NEW $39 SP81491 All-weather IPX4 waterproof rating KIT INCLUDES 12V MINI 3/8’’DR IMPACT WRENCH • Speed: 2200rpm • Torque: 105Nm 10PC METRIC IMPACT SOCKET RAIL SET • 10 to 19mm 2X 2.0AH BATTERIES & 12V 3/8’’DR RATCHET WRENCH • Speed: 250rpm • Torque: 54Nm $495 SP82144 $567 NORMALLY METRIC & SAE SUMO SERIES POWER HUTCH TOOL KITS 1066(W) x 480(D) x 1610(H) $4099 SP50551X FOAMED $410 APPRENTICE CASH $3999 SP50551 299 PIECE APPRENTICE CASH $400 $6099 SP50557X FOAMED $610 APPRENTICE CASH $5999 SP50557 547 PIECE $600 APPRENTICE CASH AVAILABLE IN 299PC & 547PC KITS TWO KITS AVAILABLE IN STANDARD AND WITH ADDITIONAL EVA FOAM TRAYS 4 OPTIONS AVAILABLE BUILT-IN POWER BOARD