Journal Articles

*Rose, LA, *Yu, Z, Bain, DJ, Elliott, EM. 2019. High Resolution, Extreme Isotopic Variability of Precipitation Nitrate. Atmospheric Environment. 207:63-74. https://doi.org/10.1016/j.atmosenv.2019.03.012.

#Huang, S, Elliott, EM, *Felix, JD, Pan, Y, Liu, D, Li, S, Li, Z, Zhu, F, Zhang, N, Fu, P, Fang, Y. 2019. Seasonal pattern of ammonium 15N natural abundance in precipitation at a rural forested site and implications for NH3 source partitioning. Environmental Pollution. 247:541-549.

Elliott, EM, *Yu Z, Cole AS, *Coughlin JG. 2019. Isotopic advances in understanding reactive nitrogen deposition and atmospheric processing. Science of the Total Environment. Special Issue on Reactive Nitrogen Deposition. 662:393- 403. https://doi.org/10.1016/j.scitotenv.2018.12.177

Wetherbee, GA, Benedict, KB, Murphy, SF, Elliott, EM. 2019. Inorganic nitrogen wet deposition gradients in the DenverBoulder metropolitan area and Colorado Front Range - Preliminary implications for Rocky Mountain National Park and interpolated deposition maps. Science of the Total Environment. 691: 1027-1042. https://doi.org/10.1016/j.scitotenv.2019.06.528

Walker, J.T., Beachley, G.M., Amos, H.M., Baron, J.S., Bash, J., Baumgardner, R., Bell, M.D., Benedict, K.B., Chen, X., Clow, D.W., Cole, A., *Coughlin, J.G., Cruz, K., Daly, R.W., Decina, S.M., Elliott, E.M., Fenn, M.E., Ganzeveld, L., Gebhart, K., Isil, S.S., Kerschner, B.M., Larson, R.S., Lavery, T., Lear, G.G., Macy, T., Mast, M.A., Mishoe, K., Morris, K.H., Padgett, P.E., Pouyat, R.V., Puchalski, M., Pye, H.O.T., Rea, A.W., Rhodes, M.F., Rogers, C.M., Saylor, R., Scheffe, R., Schichtel, B.A., Schwede, D.B., Sexstone, G.A., Sive, B.C., Templer, P.H., Thompson, T., Tong, D., Wetherbee, G.A., Whitlow, T.H., Wu, Z., *Yu, Z., Zhang, L. 2019. Toward the improvement of total nitrogen deposition budgets in the United States. Science of the Total Environment. 691: 1328-1352. https://doi.org/10.1016/j.scitotenv.2019.07.058

Novak, M, Jackova, I, Curik, J, Pacherova, P, Elliott, E, Cejkova, B, Valkova, I, Prechova, E, Stepanova, M, Buzek, F. 2019. d 15 N systematics in two minerotrophic peatlands in the eastern U.S.: Insights into nitrogen cycling under moderate pollution. Global Ecology & Conservation. 17. e0057. https://doi.org/10.1016/j.gecco.2019.e00571

Sebestyen, S ; Ross, D; Shanley, J; Elliott, EM; Kendall, C; Campbell, J; Dail, D; Fernandez, I; Goodale, C; Lawrence, G; Lovett, G; McHale, P; Mitchell, M; Nelson, S; Shattuck, M; Wickman, T; Barnes, R; Bostic, J; Buda, A; Burns, D; Eshleman, K; Finlay, J; Nelson, D; Ohte, N; Pardo, L; *Rose, L; Sabo, R; Schiff, S; Spoelstra, J; Williard, K. 2019. Unprocessed atmospheric nitrate in waters of the Northern Forest Region in the USA and Canada. Environmental Science & Technology. 53:3620-3633. http://dx.doi.org/10.1021/acs.est.9b01276

Beattie, G., Han, Y., & La Nauze, A., (2019) "Conservation Spillovers: the Effect of Rooftop Solar on Climate Change Beliefs", Environmental and Resource Economics, 74(3).

Leng, Y., Xu, Q., Harries, K.A., Chen, L., Liu, K. and Chen, X. (2020) Experimental study on mechanical properties of laminated bamboo beam-to-column connections, Engineering Structures

Gauss, C., Harries, K.A., Kadivar, M., Akinbade, Y. and Savastano, H. (2020) Quality assessment and mechanical characterization of P. edulis bamboo treated with CCB and DOT, European Journal of Wood and Wood ProductsVol. 78, No. 2, 257-270. https://doi.org/10.1007/s00107-020-01508-x

Akinbade, Y., Harries, K.A., Sharma, B., Nettleship, I. and Ramage, M. (2020) Variation of through-culm wall morphology in P. edulis bamboo strips used in glue-laminated bamboo beams, Construction and Building Materials, Vol 232, https://doi.org/10.1016/j.conbuildmat.2019.117248

Gauss, C., Savastano, H. and Harries, K.A. (2019) Use of ISO 22157 Mechanical Test Methods and the Characterisation of Brazilian P. edulis bamboo, Construction and Building Materials, Vol 228, https://doi.org/10.1016/j.conbuildmat.2019.116728

Xu, Q., Chen, X., Chen, J-F., Harries, K.A. and Wang, Z. (2019) Seismic strengthening of masonry walls using bamboo components, Advances in Structural Engineering, Vol 22, No. 14, 2982-2997. https://doi.org/10.1177/1369433219855902

Ben Alon, L. Loftness, V., Harries, K.A., DiPietro, G. and Cochran Hameen, E. (2019) Life Cycle Assessment of Natural vs Conventional Building Materials: A Case Study on Cob Earthen Construction, Building and Environment, Vol. 160, 106150. https://doi.org/10.1016/j.buildenv.2019.05.028

Harries, K.A., Morrill, P., Gauss, C., Flower, C., Akinbade, Y. and Trujillo, D. (2019) Screw Withdrawal Capacity of Full-Culm P. edulis Bamboo, Construction and Building Materials, Vol. 216, pp 531-541. https://doi.org/10.1016/j.conbuildmat.2019.05.009

Akinbade, Y., Harries, K.A., Flower, C., Nettleship, I., Papadopoulos, C., and Platt, S.P. (2019) Through-Culm Wall Mechanical Behaviour of Bamboo, Construction and Building Materials, Vol. 216, pp 485-495. https://doi.org/10.1016/j.conbuildmat.2019.04.214

Chen, L, Xu, Q. Leng, Y., Harries, K.A. and Wang, Z. (2019) Experimental study of fire performance of engineered bamboo beams exposed to three-sided fire, Fire Safety Journal, Vol. 106, pp 52-60. https://doi.org/10.1016/j.firesaf.2019.04.002

Ben-Alon, L., Loftness, V., Harries, K.A., and Cochran-Hameen, E. (2019) Integrating Earthen Building Materials and Methods into Mainstream Construction Projects Using Life-Cycle Assessment (LCA) and Building Policy Analysis, Earth USA 2019, Santa Fe, NM, October 2019.

Ben Alon, L. et al. and Harries, K.A. (2019) Integrating earthen construction into mainstream housing projects using life-cycle assessment (LCA) and building policy analysis, Sustainable Built Environment(SBE19), Graz, Austria, September 2019.

Archila, H.F., Christovasillis, I.P., Zea-Escamilla, E. and Harries, K.A. (2019) Structural Analysis of Cross-Laminated BambooGuadua (G-Xlam) Panels Using Design Methods for Xlam Timber (CLT), Timber 2019, London, July 2019.

Ben Alon, L.,Loftness,V., Harries, K.A. and Cochran-Hameen, E. (2019) The Biophilic Power and Environmental Urgency of Earthen Construction, CESB19, Prague, July 2019.

Finn, J.R., Galvin, J.E., Hornbostel, K. (2020). CFD investigation of CO 2 absorption/desorption by a fluidized bed of microencapsulated solvents. CHEMICAL ENGINEERING SCIENCE: X, 6(1), 100050. https://doi.org/10.1016/j.cesx.2019.100050

Nguyen, D., Murialdo, M., Hornbostel, K., Pang, S., Ye, C., Smith, W., Baker, S., Bourcier, W., Knipe, J., Aines, R., Stolaroff, J. (2019). 3D printed polymer composites for CO 2 capture. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 58(1), 22015-22020. https://doi.org/10.1021/acs.iecr.9b04375

Kotamreddy, G., Hughes, R., Bhattacharyya, D., Stolaroff, J., Hornbostel, K., Matuszewski, M., Omell, B. (2019). Process modeling and techno-economic analysis of a CO 2 capture process using fixed bed reactors with a microencapsulated solvent. ENERGY & FUELS, 33(1), 7534-7549. https://doi.org/10.1021/acs.energyfuels.9b01255

Z. Zhou, T. Gao, S. Tan, S. McCarthy, A. Kozbial, D. P. ands Lei Li, and P.W. Leu, “Parahydrophobicity and stick-slip wetting dynamics of vertically aligned carbon nanotube forests,”Carbon, vol. 152, pp. 474–481, November 2019.

S. Haghanifar, L. M. Tomasovic, A. J. Galante, D. Pekker, and P. W. Leu, “Stain-resistant, superomniphobic flexible optical plastics based on nano-enoki mushroom-like structures,” Journal of Materials Chemistry A, vol. 7, no. 26, pp. 15 698–15 706, 2019, doi: 10.1039/C9TA01753D.

S. Haghanifar, M. McCourt, B. Cheng, J.Wuenschell, P. Ohodnicki, and P.W. Leu, “Creating glasswing butterfly-inspired durable antifogging superomniphobic supertransmissive, superclear nanostructured glass through Bayesian learning and optimization,” Materials Horizons, vol. 6, no. 8, pp. 1632–1642, 2019, doi: 10.1039/C9MH00589G.

Sawant, T.V.; Yim, C.; Henry, T.; Miller, D.; McKone, J. Redox Flow Batteries Kinetics: Challenges and Opportunities (manuscript in preparation)

Q. Wan * / M.T. Sharbati * , J.R. Erickson, Y. Du, F. Xiong, “Emerging Artificial Synaptic Devices for Neuromorphic Computing,” [Invited Review] Advanced Materials Technologies 4, 1900037, (2019)

Soumya Sridar, Yunhao Zhao, Wei Xiong, (2020) "Cyclic Re-austenitization of 1 Copper-bearing High-Strength Low-Alloy Steels Fabricated by Laser Powder Bed Fusion", Materials Characterization,

Yunhao Zhao, Kun Li, Matthew Gargani, Wei Xiong, (2020) "A Comparative Analysis of Inconel 718 Made by Additive Manufacturing and Suction Casting: Microstructure Evolution in Homogenization", Additive Manufacturing, Accepted for publication, https://arxiv.org/abs/2005.14089

Yunhao Zhao, Noah Sargent, Kun Li, Wei Xiong, (2020) "A new high-throughput method using additive manufacturing for materials design and processing optimization", Materialia, Under review, https://arxiv.org/abs/2005.14092

CONFERENCE PROCEEDINGS

Copeland, S. + and Bilec, M.M.* (2020 in press). “Buildings as Material Banks Using RFIS and Building Information Modeling in a Circular Economy.” Procedia CIRP, 27 th CIRP Life Cycle Engineering (LCE) Conference, May 13-15, 2020, Grenoble, France and virtual.

Gardner, H., Garcia, J.+, Hasik, V., Olinzock, M., Banawi, A., Bilec, M.M.* (2019). “Material life cycle assessment of a living building.” Procedia CIRP, 26th CIRP Life Cycle Engineering Conference, Advancing Industrial Sustainability, May 7 - 9, 2019, Purdue University, West Lafayette, IN.

Mohammidiziazi, R., Bilec, M.M.* (2019). “Developing a framework for urban building life cycle energy map with a focus on rapid visual inspection and image processing.” Procedia CIRP, 26th CIRP Life Cycle Engineering Conference, Advancing Industrial Sustainability, May 7 - 9, 2019, Purdue University, West Lafayette, IN.

M.T. Sharbati, S.Y. Cho, Q. Wan, G.N. Tomaraei, J. Schlea, M. Bedewy, F. Xiong, “Sheet-rich Silk-base RRAM with Low Switching Voltages and Improved Reliabilities,” IEEEDevice Research Conference (DRC), Jun. 2019, Ann Arbor, MI

Hajiseyedjavadi, S, Karimi HA, and Blackhurst MF. "A Machine Learning Approach to Identity Houses with High Lead Tap Water Concentrations." Accepted at Conference on Innovative Applications of Artificial Intelligence (IAAI-20). New York, NY. February 9-11, 2020.

Kotchey, G.P., Chouinard, C.P., Sanchez, D.V.P., Nanobubble Collapse for ROS generation usingdynamic stimuli American Chemical SocietyAugust 2020 (accepted).

Mahboobin, A., Sanchez, D.V.P., Incorporating Sustainability into a Bioethics Course American Society of Engineering EducationMontreal QC June 2020.

Zhou, J., Fang, K., Kotchey, G.P., Sanchez, D.V.P., Hong, S.H. Characterizing biofilm formation of Escherichia Coli and Shewanella Oneidensis On Different Carbon-foam Electrodes American Society of Microbiology Conference Chicago IL March 2020.

Chouinard, C., Klonicki, E., Kotchey, G.P., Fang, K. Hong, S.K., Sanchez, D.V.P., Graphene Nanoplatelets in Bioelectrochemical Systems 2020 Borchardt Conference Ann Arbor MI February 2020

Zheng, C., Akinbade, Y., Nettleship, I. and Harries, K.A. (2019) The Potential Utility of Materials Informatics in Developing NonConventional Materials, 18th International Conference on Non-Conventional Materials and Technologies (18NOCMAT) Nairobi, Kenya, July 2019.

Harries, K.A., Nettleship, I., Akinbade, Y., Papadopoulos, C., Acosta, F., Morales Albino, J. and Ariezaga Gonzalez, M. (2019) Full-culm Bamboo as a Full-fledged Engineering Material, 18th International Conference on Non-Conventional Materials and Technologies(18NOCMAT) Nairobi, Kenya, July 2019.

Morrill, P., Rogers, C. Akinbade, Y. and Harries, K.A. (2019) Screw connections to full-culm bamboo. 18th International Conference on Non-Conventional Materials and Technologies(18NOCMAT) Nairobi, Kenya, July 2019.

Harries, K.A., Archila, H., Trujillo, D., Kaminski, S. and Zea Escamilla, E. (2019) Bamboo Reinforced Concrete: Lesson Learned, Prohibitions and Opportunities. 18th International Conference on Non-Conventional Materials and Technologies (18NOCMAT) Nairobi, Kenya, July 2019.

Harries, K.A. (2019) Grand Challenge or Oxymoron? Codes and Standards Development for Nonconventional Materials. 18th International Conference on Non-Conventional Materials and Technologies(18NOCMAT) Nairobi, Kenya, July 2019. (keynote lecture)

Trujillo, D. and Harries, K.A. (2019) Development of A Bamboo Design Standard for the 21st Century, 18th International Conference on Non-Conventional Materials and Technologies(18NOCMAT) Nairobi, Kenya, July 2019.

Johnson, C., Sanchez, D.V.P., Identifying the Capability of Real-time Water Quality Sensor Networks Borchardt Conference Ann Arbor MI February 2020

Zhou, J., Fang, K., Kotchey, G.P., Sanchez, D.V.P., Hong, S.H. Characterizing biofilm formation on carbon-foam electrodes AICHE MRC Chicago IL March 2020.

Greene, M., Nguyen, C., Sanchez, D.V.P., Identifying Phenomena and Developing Sustainable Engineering Educational Modules that Integrate STEM Education Best Practices and Next Generation Science Standards for Middle School Science Teachers American Society of Engineering EducationTampa FL June 2019.