ZeroTrace Home

Page 1

ODOR NEUTRALIZER


INCLUDES

ODOR NEUTRALIZER

2

GETTING STARTED TIMER SETTINGS MOTION DETECTION WARRANTY FCC STATEMENT

4 6 8 10 11

3


GETTING STARTED Attach the power adapter into the Zero Trace unit and plug into a standard wall outlet. To turn on, press and hold for one second. The fan will start running continuously at 50% power. Press

to switch between 50% and 100% fan power.

To turn off, press and hold

4

again for one second.

5


TIMER SETTINGS Press to activate the 2-hour run timer. The LED indicator ring will flash twice. Press again to activate the motion sensor (details on next page). The LED ring will circle twice.

2 HR

6

MOTION SENSOR

CONTINOUS

Press a third time to return to continous run mode.

7


MOTION DETECTION When in motion detection mode , the front-facing sensor detects even the slightest movement up to 16 feet away, triggering the Zero Trace unit to start a 1 hour cycle. This insures continuous odor neutalization throughout the day.

8

9


LIMITED WARRANTY

FCC STATEMENT

Subject to the terms, conditions and limitations below, Zero Trace guarantees that your purchase will be free from defects in materials and workmanship for one (1) year from the date of purchase, for the original owner only. Proof of purchase for warranty claims is required. Normal wear and tear are excluded.

Product Name: Zero Trace™ Portable Trade Name: Wildgame Innovations

IMPORTANT: The warranty is VOID if any of the following apply: (1) damage is caused by abuse, misuse, neglect, or failure to precisely follow any product use instructions or warning labels; (2) the product or any of its parts or accessories have been modified or altered; (3) there was a failure to perform normal recommended maintenance; (4) the product is not properly registered, within 10 days of purchase; and (5) the product is determined to be not an authentic Zero Trace™ product or it is determined to have, at any time, been stolen, counterfeited or misappropriated from its rightful owner.

This is the sole and exclusive warranty and there are no warranties which extend beyond the description on the face hereof. The implied warranties of merchantability and fitness for a particular purpose are expressly disclaimed. All disclaimers and limitations of liability apply even if the remedy fails of its essential purpose. Except as may be prohibited by state law, Zero Trace™ assumes no liability for incidental, consequential, or special damages or expenses of any kind. The sole and exclusive remedy pursuant to this warranty is the repair, replacement or refund of the defective product at our sole discretion.

TO OBTAIN SERVICE: Contact the consumer service department at (877) 414-9376 for a return authorization number (RA#) prior to sending the unit. Write the RA# on the outside of the package along with the words “Service Return.” Attach a note to the product containing your name, address, telephone number and a description of the problem. Carefully package and return the product, transportation charges prepaid, to the factory. Collect shipments will not be accepted. Shipments without an RA# issued and listed on the outside of the shipping box will not be accepted.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two criteria: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

10

The warranties and guarantees contained herein are non-transferable and non-assignable. All warranties and guarantees contained herein shall be null and void in the event the original purchaser sells, assigns or conveys the product.

11


Ze r oTr a c eI o n . co m

602 Fountain Parkway Grand Prairie, TX 75050 (877) 414-9376


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.