Timber Fixings TC Truss Clip: Designed to provide an inexpensive and effective method of fixing trussed rafters to wallplates as recommended in BS 5268 : Part 3. Available in 38, 44, 47 and 50mm widths. FA3 Framing Anchor: Multi - purpose fixing that can be used for connecting roof timbers, joist trimmings, studding and general timber frame construction. Slotted design allows bending on site to suit all configurations. Manufactured from 1.2mm thick galvanised steel. NP Hand Nail Plate: A cost effective method of jointing structural timbers (such as site built trusses) simply by nailing through the pre -punched holes. Plates must be fixed on both sides of the timber. The pressed dimple design adds strength and rigidity to the component whilst also assisting in the location of nails. Available in a wide range of widths and lengths. GS Glide Shoe: A purpose made galvanised metal bracket specifically designed to allow raised tie or scissor trussed rafters to achieve designed deflection, both horizontally and vertically. SP Splice Plate: An economical on-site method of butt jointing timbers of similar section. Suitable for use when replacing rotten floor joist ends, replacement of fire damaged timbers and repairing localised structural timber damage. Must be fixed in sets of 4 per joint, minimum timber thickness 50mm. 8
www.bpcfixings.com
