Fibrax by Krzysztof Wieczorek

The Choice o DISC PADS & ROTORS

RIM

of Champions

M PADS

CABLES & SPARES

Introducing

Double Life Cleat Lasts twice as long as a normal cleat

FCM4000 - GOLD

FCM4010 - SILVER

Available for LOOK Keo AVAILABLE IN GOLD AS A SPECIAL LIMITED EDITION SILVER AS STANDARD Note: The images above are representative only and therefore the exact colours may vary slightly from those shown. Both plates will be supplied in the one colour, either gold, or silver

“Amazing and so simple, once they have worn down to the stage I would normally throw them away, I just unscrew the bolts flip & rotate the connecting plate and bingo new unworn cleats.”

Claire Sutcliffe

Disc PaDs & rotors • rim PaDs • cables • cleats

Tel: 01978 356 744 www.fibrax.com www.facebook.com/fibrax

@FibraxLtd

NEW & IMPROVED

Hydraulic Hose Kits & Fittings Hydraulic Brakeline Fitting Dealer Pack (FCB3403) -High quality fittings to replace hoses on 10 hydraulic systems. -Each fitting available in top-up packs using the codes listed. -Designed for use with Fibraflex stainless steel braided hydraulic hose

Fibraflex Stainless Steel Braided Hydraulic Hose FCB3338 - 15m Reel of Fibraflex®Hose

FCB3404

FCB3405

FCB3406

FCB3407

FCB3408

Lever Connector x 10

Hose Connector x 20

Barbed Connector x 20

Straight Connector x 10

Banjo End x 10

FCB3409

FCB3325

FCB3327

FCB3332

FCB3410

Banjo Bolt x 10

Alloy Washer x 20

“O” Ring (OD 8mm x 1mm) x 20

Stainless Steel Shim (0.2mm) x 20

Frame Protector x 10

-Super flexible construction allows better routing on the cycle. -Rated to 13,000psi (89,000 kPa) for superior performance. -Tough PVC outer protects both hose and frame. -Suitable for use with all common hydraulic fluids. Braided stainless PTFE steel jacket Liner

Tough PVC outer sleeve

FCB3333 - Hydraulic Hose Guide x 10 Note: FCB3333 is not supplied in the dealer pack, however they can be ordered seperately as a refill pack of 10.

Fibraflex Hose Kits Kit 1 is suitable for :

• Avid (Not Avid Elixir 1 & 3 • & not SRAM XX 2010/11) • Magura (pre 2012) • Hayes HFX/Sole/Dyno FCB1300 - Kit 1 Front FCB1301 - Kit 1 Rear

Kit 2 is suitable for :

• HOPE • FORMULA (2011/2012) • Magura (2012) • Hayes Stroker/El Camino/Prime • SRAM XX 2010/11 • Shimano XT (755/765/776/785)

• Shimano Zee/Saint/XTR • Shimano SLX (666/675) • Shimano Deore (525/535/595) FCB1302 - Kit 2 Front FCB1303 - Kit 2 Rear

Kit 3 is suitable for :

• Avid Elixir 1 & 3 • Shimano Deore 555 • Shimano LX & Shimano SLX 665 • Shimano XT 775 • Shimano XTR 975 FCB1304 - Kit 3 Front FCB1305 - Kit 3 Rear

Item FCB3404

FCB3405

FCB3406

FCB3407

FCB 3410

FCB3408

FCB3409

FCB3327

Kit 1

Kit 2

Kit 3

Front kits contain 0.9m of hose and rear kits contain 1.8m of hose.

Simpler and easy to fit

Th Fibrax is the leading UK supplier and manufacturer of quality brake pads, cables and components for the bicycle industry. Our aim is to provide high-quality products with superior performance. All brakes, regardless of the mechanism, share one thing in common - they increase the amount of friction (on the wheel) allowing the rider to control how they slow or stop. Fibrax has over 40 years experience in developing and producing braking materials and products. In that time, machinery and materials have changed considerably, but Fibrax invests in the latest technology to offer the most up to date products in the market today.

e S c ience of Fibrax has designed and developed a comprehensive range of disc pads, rotors, rim pads, cables and spares. Fibrax products will help whether youâ&#x20AC;&#x2122;re looking for that improved edge on a racing bike, or looking to experience the excitement of cycling on a mountain bike. Fibrax replacement parts not only improve your performance, but also enhance your riding experience. Fibrax is dedicated to pushing the boundaries and the exploration of new product development to create the ultimate products of the highest quality. There is a team of product development engineers who design, develop and refine the products including new brake block designs and cables.

The Fibrax products are made in the same factory where automotive moulded parts are manufactured to the exacting standards required by the automotive industry. The appliance of science in our research and development division means these high standards are reflected in our production of high quality cycle components, giving you state of the art unbeatable stopping power!

Braking ATHERTON RACING boasts World, European and National titles making them without doubt the fastest family on two wheels. Fibrax are proud to continue their sponsorship supplying the team with a variety of Fibrax products as they embark on winning more titles around the world. www.athertonracing.com

FIBRAX WREXHAM ROADS CLUB Enjoy one of the longest running sponsorships in British Cycling, the Fibrax Wrexham Roads Club has been associated with Fibrax since 1979, adopting our name in 1994. www.fwrc.org.uk

THE MI RACE TEAM O of the foremost Cycloteams in the UK. Fibrax a long standing associ with the M.I. Race Tea providing both financia and technical assistanc with the entire team u Fibrax pads and cables team have won World, Championships. No oth boast that achievemen www.miracing.co.uk

SCOTT UK MOUNTAIN TEAM Fibrax have wor with the SCOTT UK Mo Bike team for many ye providing Fibrax pads a cables. The success of team speaks for the qu of Fibraxâ&#x20AC;&#x2122;s parts. www.scott-racingworl

One -cross x have iation am, al ce, using s. The , European and British her British team can nt.

N BIKE rked ountain ears, and the uality

ld.com

THE TORQ RACE TEAM was set up as an extension to the family run business, Torq fitness, where coached riders race under the Torq banner. The team grew in strength and started to dominate at team events. Fibrax supply parts helping the team perform to the max. www.torqfitness.co.uk ALF JONES CYCLES Established in 1955, Alf Jones Cycles in Wrexham is the area’s premier bicycle shop. Alf Jones’ now has a rapidly growing race team. Alf Jones’ and Fibrax have had a fruitful working relationship over the years and now have their relationship further strengthened with the sponsorship of the club. www.alfjonescycles.co.uk

� �� is� �� ontru�tion

Fibrax disc pads are tested on a specially designed test rig for optimum quality and ance. dditionally, our pads are regularly tested in comparison to market leaders to continue to offer cutting edge performance.

Precision gr for instant p

agnetic Stainless Steel backing plate - 100 rust free. Semi- etallic Formula - The result of years of testing to destruction for optimal performance.

High-streng bond - resista temperatu

Fibrax s avefront surface finish greatly reduces bedding in time by producing pressure points across the pad surface, leading to a rapid transfer of material to the rotor and allowing the disk surface to match the cross-sectional profile of the rotor far more quickly.

Original Finish

�rg�ni� �� onstru�tion

agnetic Stainless Steel backing plate 100 rust free.

�intere� �� onstru�tion

Wavefront Finish

lloy beads lightweight h excellent fric with go dissi

The sintering bonds the pa sintered pad w p

�� ypes Semi � etallic Pad for general use

Semi � etallic � igh Performa

� � ��

�is� �� omp�ti�ility

performo ensure we

round surface performance.

gth chemical ant to extreme ure changes.

s fused into a honeycomb for ction and wear ood heat ipation

g process also ad by fusing the with the backing plate

ance Pad

System Avid BB5 Mechanical BB7 Mechanical Code Elixir Juicy Cannondale Code SM Diatech Anchor Kinetic Mechanical Nifon Spiral Stop Eberie EM Formula B4 Hydraulic MD1 Mechanical Oro The One R1 RX Mega 07 Giant MPH1 MPH2 Grimeca System 1 System 11 System 12 System 14 System 15 System 16 System 17 System 18 System 19 System 2 System 6 System 7 System 8 System 8 System 9 Hayes El Camino Hydraulic

Page 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 7 7 7 7 7 7 7 7 7 8 8 8 7 8 8 8 8 8 8 8 8 9 8 9 9

Sintered � etallic Pad

� � � � � ��

System Hayes Stroker Ryde Stroker Trail Sole Hope 2 Piston 2 Pot Mini 4 Piston 6 Pot Mini Mono M4 Mono Mini Magura Clara (Pre 2001) Clara 2001 Gustaff Julie Louise (Pre 2007) Louise 2007 Louise FR 2004 Marta Promax DSK-400 DSK-610J DSK-700 DSK-810 Hydraulic Xnine RST Mechanical Shimano Deore Hydraulic BR-M555 Deore M475 Deore M515 Deore M525 Deore XT M755 XTR M965 XTR M966 Saint M810 Suntour DB-700 DB-XCC-MC Tektro Auriga Gemini IO Novella

Page 9 9 9 10 10 10 10 10 10 11 11 11 11 11 11 11 11 12 12 12 12 12 12 12 12 13 13 13 13 13 13 13 13 13 14 14 14 14

vid BB5

echanical

vid uicy BB7 echanical SH SH SH

� � �� vid Code

vid Elixir

Cannondale Coda

Diatech nchor

SH 3

�

� �� Diatech inetic

echanical, ifon

SH 3

Formula B

SH SH SH

3 3 3S

Diatech Spiral Stop

Eberie E

SH 3

Formula Hydraulic

Formula D1 echanical SH

Formula

SH SH SH

6 6 6S

iant

SH SH SH

PH2

� �� Formula The ne,R1,R ega

iant

SH SH

rimeca Systems 1

iant 07

SH SH SH

PH1

1 1 1S

SH 8

�

� �� rimeca Systems 8 12 SH 8

rimeca Systems 11, 17, 18 19 SH 88

rimeca System 2 SH

rimeca Systems 6 9 SH 8

rimeca Systems 7, 1 16 SH 83 SH 83S

rimeca System 8

SH SH SH

Hayes Stroker Ryde SH SH SH

3 3 3S

� �� Hayes Hydraulic

SH SH SH

Hayes Stroker Trail

SH SH

Hayes El Camino

SH SH SH

1 1 1S

Hayes Sole

SH SH SH

�

� �� Hope 2 Piston

SH 1 SH 1 S

Hope 6 Pot

SH 1 SH 1 SH 1 S

ini

Hope 2 Pot

ini

Hope

SH 18 SH 18 SH 18S

Hope

ono

SH 11 SH 11 SH 11S

ini

Piston

SH 1 SH 1 SH 1 S

Hope

SH SH SH

ono

agura Clara 2001, ouise FR 200 SH 6 SH 6 SH 6 S

agura ouise 2007 SH 61 SH 61S

� � � � � � �� agura

ustaff

SH 6

agura ouise (Pre 2007), Clara (Pre 2001) SH 6 SH 6 SH 6 S

agura ulie

SH 68 SH 68 SH 68S

agura

arta

SH 63 SH 6 S

��

� �� Promax Hydraulic

SH SH SH

Promax DS -810

SH SH SH

Promax DS - 00, DS -610 ine SH SH SH

RST

echanical

SH SH SH

Promax DS -700

SH SH SH

6 6 6S

Shimano Deore Hydraulic BR- 555 SH SH SH

Shimano Deore 525, 75, 86 515 SH SH SH

1 1 1S

Shimano Saint 2009 810 SH SH SH

� �� Shimano Deore T 755 SH SH SH

Suntour DB- CC- C

SH 3

Shimano TR 965 966 SH SH SH

3 3 3S

Suntour DB 700

SH 38

��

� �� Tektro uriga

SH SH SH

1 1 1S

Pre-threadlocked, dome headed mounting bolts for standard disc rotors.

Pack of 50 convenien disc rotor wipes, prelcohol for effective c surface.

FCB11 8 Retail pack of 6 FCB33 8 Dealer pack of 100 in dispenser bottle

FC 1

� �� Tektro emini, ovela SH SH SH

Tektro

SH SH SH

nt, individually wrapped -treated with so-propyl cleaning of the disc rotor

8 8 8S

luminium disc rotor adapter - allows a 203mm rotor to be used with existing calipers and mounts. FC 1

Fib

High stan

Sup and

� ��

brax Disc

otors

h quality stainless steel disc rotor series with international ndard six-bolt mounting.

pplied with pre-threadlocked, dome headed mounting bolts d a handy rotor wipe to remove contaminates after fitting. vailable in a range of si es from 160mm to a massive 203mm, in both standard and wavy formats. ef FC 16 FC 16 FC 16

Descri tion 160mm Standard Format 160mm avy Format 160mm Superlight Format

FC 18 FC 18

180mm Standard Format 180mm avy Format

FC FC

203mm Standard Format 203mm avy Format

3 3

dd a B to the end of any of the above codes to order in bulk workshop packs of 5 without retail packaging.

e su erlig t 16 rotor eig s in at ust 8 g aking it �� lig ter t an t e standard rotor

��

� ��

�t s not ust rubber ibrax pads are manufac tured in the � by ibrax using compounds developed specifically for ibrax and each compound provides different characteristics.

For

ibrax Blac is an all purpose compound ith a high carbon content. Blac provides a hard earing rim friendly surface ith excellent modulation in both et and dry conditions.

Fibrax C

ibrax Red is a reduced carbon compound. Being slightly softer than Blac ibrax Red offers better bra ing ith a correspondingly shorter life and reduced modulation.

Pads

se on Both Carbon and lloy Rims

Stu Bowers of the Scott

ountanbike Team t s great to be involved with the development process of new products. Plenty of real life testing is what leads to a quality end product and Fibrax keenly listen to feedback and act on it. � � ��

ibrax Bro n is designed for extreme conditions. Our uni ue formula ensures a hard earing pad that provides excellent bra ing and modulation in both et and dry conditions.

ibrax Green has been specially formulated to ithstand the rigours of bra ing on ceramic rims hile providing exceptional modulation and superior performance under all conditions.

ibrax Grey has been designed to provide incredible bra ing and modulation in all conditions and to seamlessly s itch bet een Carbon and Alloy rims ithout cross contamination.

These newly developed carbon rim compound pads perform well compared to others ve used. The soft compound provides plenty of stopping power, with a reassuringly predictable feel, even in the wet, but durability seems to be good too, which is a tough balance to achieve. o squealing was a real plus, but most pleasing for me, as a rider who constantly changes wheels, is they work well on aluminium rims too. They don t pick up fragments of metal in the way that some pad compounds can, which would then be very damaging to carbon rims. ith Fibrax C- pads there is no fuss switching around rims from carbon to alloy rims and vice-versa.

� � � � � ��

ow profile V brake pads in post or threaded variants SH 1 Blac threaded SH 1 C Ceramic threaded SH81 Grey post mount Substitute ASďż˝ 8 for ASďż˝ mount variant.

ow profile threaded V brake pads

SH 3 SH 3

for post

TR upgrade post type holders. Supplied with extra set of black, red or treme pads

TR upgrade threaded holders with Dual Cure Rhino insert pads SH 6 D

HINO

Blac treme

SH8 SH8

Blac Red B Blac Blac

� ��

Threaded TR upgrade holders. Fitted with treme pads

TR upgrade threaded holders. Supplied with extra set of black, red or treme pads SH SH SH SH

Blac Red B Blac Blac Blac treme treme treme

Dual Cure Rhino nsert Cartridges for V Brakes

nsert Cartridges for V Brakes

SH SH SH SH SH

1 Blac Red 1C Ceramic 1 treme Extra alue 2 Pair Pac

HINO

��

� ��

Road caliper brake holders, suitable for Shimano and other systems. Supplied with extra pads SH SH SH SH

Blac Red B Blac Blac Blac treme treme treme

Road caliper brake holders, suitable for Shimano and other systems SH 6 Blac SH 1 treme

nsert pads suitable for Shimano Dura ce in treme Compound

nsert pads suitable for Shimano Dura ce SH 1 Blac SH 1 Red SH 1 C Ceramic

SH 1

Road caliper brake holders fitted with Dual Cure inserts, suitable for Shimano and other systems SH 6 D

nsert pads suitable for Shimano Dura ce in Dual Cure Compound SH 1 D

Road caliper brake holders, suitable for Shimano and other systems. For use on both Carbon Composite and lloy Rims SH 6 C

nsert pads suitable for Shimano Dura ce for use on both Carbon Composite and lloy Rims SH 1 C

nsert pads suitable for Shimano Dura ce xtra alue Pair Pack SH 1

nsert pads suitable for Campagnolo Record, Chorus and thena in Black, Red or Ceramic Compound SH SH SH

Blac Red C Ceramic

nsert pads suitable for Campagnolo 2000 caliper in treme compound SH 3

Hydraulic rim pads for agura systems

x SH6 1 x

� ��

nsert pads suitable for Campagnolo 2000 caliper in Black or Ceramic compound

nsert pads suitable for Campagnolo Record, Chorus and thena in treme Compound SH

SH SH8

SH 3 Blac SH 3 C Ceramic

unior TB pads suitable for V brake and cantilever systems. vailable in post mounted and threaded variants hreaded Post � ounted

B pads for brake systems on over-si ed rims SH

��

� ��

Surestop cantilever pad with improved wear performance SH SH SH SH

8 Blac 8 Red 8C Ceramic 8 Grey

Synthetic pad, 8mm for cantilever systems SH SH

lpine integral synthetic pad. d ustable, with 20mm bolt for brakes and deluxe cantilever systems SH31

1 Standard for alloy rims 1 Raincheater for steel rims

Flat top pad suitable for stirrup brakes

SH3

Surestop caliper pad with improved wear performance and larger pad surface. n black or red

lpine integral synthetic pad, for cantilever systems on alloy rims SH

SH SH

Pad suitable for carrier brakes - with distance collar

Pad suitable for Raleigh Roadster

Blac Red

SH1

Pad suitable for Raleigh Philips calipers

SH 6

SH SH

36mm Pad Suitable for einmann, Raleigh and other calipers.

style pad for alloy rims, caliper fitting.

1 Studded Pattern

Raincheater 36mm for steel rims. Fits all standard calipers. SH3

� ��

ll Fibrax brake pads and disc pads are available in workshop packs of 25 pairs. ess packaging. ess waste. ess cost. Simply substitute DSH for SH in the part code to order.

��

�o ergli�e Fibrax Brake cables, outer casings and inner wires.

�eisure These cables are hot dip

galvanised for superior corrosion resistance and pre-stretched for consistent, predictable performance.

Fibrax Sport stainless steel cables offer superior strength and corrosion resistance for a virtually maintenance free cabling solution.

�i�r� le �t�inl �r�i�e� �y�r�u P F iner

�port

�o ers i t Fibrax ear cables, outer casings and inner wires.

PTFE has one of the lowest coefficient of friction of any known material. ur pert range of PTFE coated cables are durable and virtually friction free.

�pert

dditionally, the premium items of the range carries an additional branding of

Braided stainless steel acket

Rated to 1 000 psi (8 00 bra eline hose is based on hich is then over braided tive maintenance free app provides a durable or ing ibraflex hose is tough and allo ing better routing on t

�i�r� �y�r�ul

e.g. Powerglide pert features Stainless Steel inner wire with PTFE coating.

P DF Core

��le �n�s ibrax fit a ide selection of cable ends each designed to per

fectly suit its application. Die cast from inc our cable ends offer a eatherproof fitting ith a pull off force hich is in excess of the bra ing strain for the cable to hich it is fitted. Common fittings are sho n belo to aid identification if the fitting you need is not sho n please contact your ibrax distrib utor for a full list.

.0 .

� B ype Bra e Cable End (Barrel)

Rated to 1 000 psi (8 0 line hose is based on a hi bound in � evlar for increa provides a durable or in

�y�r�uli� �omp

. R .1

Gear Cable End Compatible ith Shimano SRA� and Campagnolo.

Road ype Bra e Cable End (Pear)

Wherever possible e ma highest uality stainless ste service ith minimal mainte Where alternative materials components hich ill mat tion. Our components are ing trouble free fitting and o

� � ��

less �teel uli� �ose

�� r� e ��le �ousing

oug P C outer slee e

00 Pa) ibrax ibraflex braided hydraulic n a high pressure lo friction P E core d ith stainless steel providing an attrac pearance. inally a P C outer sleeve g surface in a variety of finshes. Overall d durable hile remaining super flexible the cycle.

iner

ayer Coiled S ell

ibrax Po erglide 2P Cable � ousing utilises a hard earing lo friction aterproof inner liner hile a close coiled shell ensures lo compression and excellent protection for your cables. A hard ear ing polymer is used to protect the hole assembly ensuring lo maintenance and precise bra ing for years to come.

li� �ose �� e�r ��le �ousing

Braided P F �acket

Polya ide 1 outer slee e

000 Pa) ibrax standard hydraulic bra e igh pressure P D core hich is then ased strength. inally a PA12 outer sleeve ng surface.

ponents

anufacture our hydraulic components from eel in order to ensure years of trouble free enance re uirements. s are specified by an OE� ibrax source tch or even exceed that original specifica manufactured to strict tolerances ensur operation.

iner

Poly er S ell

Flock ayer Helical S ell

ibrax Po ershift SP Cable � ousing utilises the same hard earing lo friction inner liner as our 2P � ousing for precise control hile our helical shell construction ith t o layer protection offers a strong ero compression system hile eeping overall eight to a minimum and improving eatherproofing and durability.

� � � � � ��

Hardwearing synthetic polymer outer layer

Helical steel wire acket for reduced weight with virtually ero compression ow friction housing liner

Super low friction secondary liner

Pre-stretch stainless st

High quality turned alloy ferrules for maximum performance

��

Su fra

� ��

�i�r� � i ty™

�� it �ontents

hed, low friction teel actuator wire Die-cast inc nipple for durability

upersoft rubber ame protector

2 x Sleeved inner ire (1.8 2.1m)

Outer Casing (2. m)

x lexible seal

12 x Alloy er rule

2 x End Cap

x Soft Rubber rame Protector

��

�i�r� le ™ �� - High quality stainless steel fittings - Sharper Response - mproved Heat Dissipation - mproved strength and durability �� ™ �� - Super flexible construction allows better routing on the cycle. - Rated to 13,000psi (89,000 kPa) for superior performance. - Tough PVC outer protects both hose and frame. - Suitable for use with all common hydraulic fluids.

FCB311 -

niversal it

Plus Rear and Front its for FCB313 FCB31 - Shima FCB313 FCB31 - agur FCB3133 FCB31 3 - Hayes FCB313 FCB31 - Hope FCB313 FCB31 - Formu

Fibraflex™ super flexible stainless steel braided hose plus the following fittings 12 31 B 5 /4 FC 35 31 B 4 /4 FC 34 31 B 3 /4 FC 33 31 B 2 /4 FC 32 31 B 40 FC 30/ 31

ano Rear Front ra vid Rear Front s Rear Front Rear Front ula ro Rear Front

�it �ontents

Item

Powerglide front rear inner wire with both pear and barrel ends and wire end cover for universal fitting. FCB11 � eisure FCB11 Sport FCB11 1 pert

Powerglide Expert Rated front rear inner wire with both pear and barrel ends and wire end cover for universal fitting. FCB1133

pert rated (P E coated stainless steel)

� �� u��s � � r� �� o �rs�

Powerglide front rear cable with both pear and barrel ends. ncludes 6 push fit ferrules and a wire end cover. FCB1 FCB1 FCB1

� eisure Sport 1 pert

Powerglide silver braided front rear cable with both pear and barrel ends. ncludes 6 alloy ferrules and a wire end cover. FCB1 18 Sport length 1.8m FCB1 31 Sport length 2.0m

� ��

Powerglide Tandem inner wire (length 3m) with both pear and barrel ends and wire end cover for universal fitting. FCB11 3 pert

��u��s � � r� �� o �rs�

Powerglide front cable with 6 push fit ferrules and a wire end cover. ith both pear and barrel ends for universal fitting. FCB1 13 � eisure FCB1 1 Sport FCB1 1 pert � �� u��s � us� �� t ��rru� �s �� r� �� o �r�

Powerglide cable kit, includes front rear cables with 8 push fit ferrules and 2 wire end covers. ith both pear and barrel ends for universal fitting. FCB 1 Sport FCB 1 3 pert

Powerglide 2P outer casing. 2000mm with 8 push fit ferrules. FCB 1

��

� �� is� �� ontru�tion

Precision gr for instant p

agnetic Stainless Steel backing plate - 100 rust free. Semi- etallic Formula - The result of years of testing to destruction for optimal performance.

High-streng bond - resista temperatu

Original Finish

�rg�ni� �� onstru�tion

agnetic Stainless Steel backing plate 100 rust free.

�intere� �� onstru�tion

Wavefront Finish

lloy beads lightweight h excellent fric with go dissi

The sintering bonds the pa sintered pad w p

�� ypes Semi � etallic Pad for general use

Semi � etallic � igh Performa

� � ��

�is� �� omp�ti�ility

performo ensure we

round surface performance.

gth chemical ant to extreme ure changes.

s fused into a honeycomb for ction and wear ood heat ipation

g process also ad by fusing the with the backing plate

ance Pad

Page 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 7 7 7 7 7 7 7 7 7 8 8 8 7 8 8 8 8 8 8 8 8 9 8 9 9

Sintered � etallic Pad

� � � � � ��

Page 9 9 9 10 10 10 10 10 10 11 11 11 11 11 11 11 11 12 12 12 12 12 12 12 12 13 13 13 13 13 13 13 13 13 14 14 14 14

SR S CHS torpedo trigger cable.

Sturmey rcher universal trigger cable. FC 1

FCB111

3 ďż˝ eisure

Powerglide eisure cantilver brake cable hanger and straddle wire kit.

FC 1

ďż˝ eisure

Brake ever cable ad usters, alloy (pack of 2) FCB1111

� ��

V-Brake guide pipe with rubber boot

FCB FCB

��

FCB11 FCB11

1 1

6 cable ad usters for road calipers (pack of 2) FCB111

Powerglide eisure cantilever brake straddle wire.

Standard (fitting a only) niversal (fittings a b)

Frame protector rings. (pack of 9) FCB1113

��

� ��

Powerglide inner wire, barrel only. (100)

Brake cable pinch bolts for road calipers. (pack of 2) FCB111

FCB31 � eisure FCB31 Sport FCB31 1 pert All supplied as 100 ires in a file box

5mm hydraulic brake hose, black (15m)

∅1.2mm Powershift inner wires, tube only. (100)

FCB31 8

FC 31 � eisure FC 31 Sport FC 31 1 pert

Supplied in a file box

All supplied as 100 ires in a file box

Powerglide inner wire, pear only. (100) FCB31 3 � eisure FCB31 Sport FCB31 pert

Powerglide 2P black casing

FCB31 6 FCB31

0m (file box) 00m (reel)

All supplied as 100 ires in a file box

∅1.1mm Powershift inner wires, tube only. (100)) FC 31

Sport

All supplied as 100 ires in a file box

Powershift SP outer casing

FC 31 3 FC 31

0m (file box) 00m (reel)

Powershift SP outer casing with push fit or sealed ferrules. (50 Pack) SP5 FC 31 6 FC 31

Powershift uter Casing

0m (file box) 00m (reel)

FC 3111 FC 311

00mm (push fit ferrules) 00mm (push fit ferrules)

FC 3113 FC 311

00mm (sealed ferrules) 00mm (sealed ferrules)

Crimp fit wire end covers (500 in dispenser bottle) FCB33 1 Silver only FCB33 1 ďż˝ Assorted colours

Crimp fit ferrules for brake outer cables. (200 in dispenser bottle) FCB33

� ��

V-Brake guide pipe with rubber boot (100 pack)

Rubber boot to fit VBrake guide pipe. (100 pack)

FCB311

FCB3116 FCB311 1

Push fit ferrules for outer casing. (150 in dispenser bottle) FCB33 FC 3

or 2P SP cable outer or SP cable outer

Push fit ferrules for outer casing. (50 in dispenser bottle) FC 3

or gear cables

��

� ��

Pre-lubed alloy sealed gear cable ferrules in assorted colours. (50 in dispenser bottle)

Pre -lubed Silveralloy sealed brake cable ferrules. (50 in dispenser bottle) FCB3313

FCB3313 �

FC 3

or 2P Casing and 1. mm Wire 3 - or SP Casing and 1.2mm Wire

CG variants supplied ith blac adapter sleeves for fitment to SP outer.

or 2P Casing and 1. mm Wire 3 � - or SP Casing and 1.2mm Wire

CG variants supplied ith blac adapter sleeves for fitment to SP outer.

Brake lever cable ad usters, alloy. (pack of 100) FCB33

6 cable ad usters for road calipers. (pack of 100) FCB331

Solderless 6mm barrel nipples. (100 in dispenser bottle)

-rings for inner wire. (600 in dispenser bottle) FCB33 3 â&#x2C6;&#x2026;1. mm inner ire FC 31 â&#x2C6;&#x2026;1.2mm inner ire

FCB33

Brake cable pinch bolts for road calipers. (pack of 100) FC33111

FC 331

Powerglide leisure cantilever cable hanger and straddle wire kit. (pack of 100)

Fibraflex™ Stainless Steel Braided Hydraulic Hose -Super flexible construction allows better routing on the cycle. -Rated to 13,000psi (89,000 kPa) for superior performance.

-Tough PVC outer protects both hose and frame. -Suitable for use with all common hydraulic fluids. FCB3338 - 15m Reel of Fibraflex™ Hose

S B

S S

'O (O

� ��

Hydraulic Brakeline Fitting Dealer Pack -Contains sufficient high quality fittings to replace hoses on ten hydraulic systems. -Each fitting available in top-up packs using the codes listed. -Designed for use with Fibrax Fibraflex™ stainless steel braided hydraulic hose (FCB3338) FCB3316

FCB3317

FCB3318

FCB3319

FCB3320

FCB3321

Stainless steel Banjo Bolt x 20

Stainless steel Banjo Nut x 10 FCB3323

Stainless steel Compression Nut (male) x 10 FCB3325

Stainless steel Banjo End x 10

FCB3322

Stainless steel Compression Nut (female) x 10 FCB3337

Stainless steel Straight Connector x 10

Alloy Banjo End x 10

Brass compression insert x 20

Alloy Washer x 20

Brass Olive x 20

FCB3327

FCB3328

FCB3329

FCB3332

FCB3317

O' Ring OD8mm x 1mm) x 20

Plastic Cover for � ale Compression Nut x 10

Rubber Cover for Banjo Connector x 10

Stainless Steel Shim (0.2mm) x 20

� ydraulic � ose Guide x 10

FCB3336

��