2015 Catalog When The Best Sound Matters
Night Clubs Houses of Worship Outdoor Venues DJ's / Live Venues
Coaxial Line Arrays Planar Magnetic Ribbon Drivers Woofers
High output, high impact, audiophile quality sound, featuring our proprietary coaxial line array speakers (Stix) and high impact subwoofers (Drums)
Stix and Drums LLC 1990 N. McCulloch Blvd. Ste. D222 Lake Havasu City, AZ Voice: 928.733.6002 Fax: 928.453.5550 info@stixanddrums.com www.stixanddrums.com
The STX 6600 is a straight column Line Array featuring six high power 6.5� custom designed neodymium woofers and six advanced design planar magnetic Ribbon drivers in a coax configuration with a unique waveguide for wide 110 degrees horizontal coverage. Ultra-fast transient response and higher instantaneous peak lever for faithful signal reproduction and improved dynamic range. The highly controlled vertical dispersion of the array and excellent coupling of the ribbon drivers at high frequency yields the ultimate hi fidelity long throw system. True line array performance provides dramatically increased intelligibility in highly reverberant spaces. Single box construction with integrated fly points and internal passive crossover for lower cost installation. Improved front to back SPL over the entire audience area, typically +/- 2db
Stix and Drums LLC 1990 N. McCulloch Blvd. Ste. D222 Lake Havasu City, AZ Voice: 928.733.6002 Fax: 928.453.5550 info@stixanddrums.com www.stixanddrums.com
STX 6600 Specifications 7.165 182
1.693 43
M10 (17 Plc's.) Loop Output
Input
-
4.724 120
1.693 43
+
Input 4ohms
-
NL4 Speakon Connectors +
Loop Output
TM
Screw terminal barrier strip
By
Subwoofer Model STX 6600 Made in Phillppines
10.000 255
TOP VIEW
INPUT PLATE
1.693 43
3.94 100
1.693 43
10.550 268
4.724 120
4.724 120
FRONT VIEW
1.693 43
SIDE VIEW
5.276 134
1.693 43
38.00 966
5.00 127
2.76 70
BACK VIEW SPECIFICATIONS
System Type
Coaxial, ribbon driver, line array, two-way, single sealed enclosure
Driver Components
(6) 6” ribbon drivers + (6) 6.5” paper/Kevlar composite mid-bass drivers
Crossover
Passive, custom
Frequency Response¹
70Hz - 20kHz @ -6db
Maximum SPL
128db continuous, 138db peak
System Coverage
110 degree horizontal, 20 degrees vertical (asymmetrical)
Sensitivity, 1m/2.83V
101db
Power Handling
720W AES, 1100W IEC long term, 1400W IEC short term
Recomended Amplifier Power @ 4ohms
500W-2000W (FTC) @ 4 ohms
Rated Impedance
6 ohms
Input Connectors
Screw terminal barrier strip and dual NL4 speakon connectors
Enclosure
Closed box alignment, 18mm marine plywood, heavily damped and braced
Mounting Options
(17) M10 fly points, (4) M8 points for wall mount option
Accessories (optional)
Wall Mounting Kit(BKT-WM66) for multiple stacked arrays L Bracket Kit(BKT-L66) for flying arrays under DRM215 subwoofer(s) Coupling Brackets(BKT-CP66) Allen Products MM-060 / MM-120 for single box wall mounting
Dimensions, (H x W x D) inches (mm)
Height 38.03” (966 mm) Width 10.550” (268 mm) Depth 10.04” (255 mm)
Weight, net
60.0 lbs. (27kgs)
Warranty
Limited 5-year warranty
ISOMETRIC VIEW
The STX 6620 is an articulated curved single box Line Array featuring six high power 6.5� custom designed neodymium woofers and six advanced design planar magnetic Ribbon drivers in a coax configuration with a unique waveguide for wide 110 degree horizontal coverage. Ultra-fast transient response and higher instantaneous peak level for faithful signal reproduction and improved dynamic range. The highly controlled vertical dispersion (asymmetrical 20 degrees) of the array and excellent coupling of the ribbon drivers at high frequency yields the ultimate hi fidelity system when more vertical coverage is required. Couple with STX 6600 for long throws applications as well as STX 4625 for extending vertical coverage. True line array performance provides dramatically increased intelligibility in highly reverberant spaces. Single box construction with integrated fly points and internal passive crossover for lower cost installation Improved front to back SPL over the entire audience area, typically +/- 2db.
Stix and Drums LLC 1990 N. McCulloch Blvd. Ste. D222 Lake Havasu City, AZ Voice: 928.733.6002 Fax: 928.453.5550 info@stixanddrums.com www.stixanddrums.com
STX 6620 Specifications 7.165 182
1.693 43
M10 (17 Plc's.)
Loop Output
Input
1.693 43
4.724 120
-
+
Input 4ohms
-
NL4 Speakon Connectors +
Loop Output
TM
Screw Terminal Barrier Strip
By
Subwoofer Model STX 6620 Made in Phillppines
TOP VIEW 10.040 [255]
3.94 100
4.724 [120]
INPUT PLATE
1.693 [43]
1.693 [43]
10.550 268
3 1.69 [43]
FRONT VIEW
4.724 [120]
3 1.69 [43]
SIDE VIEW
5.276 134
1.693 43
38.03 966.0
5.00 127
2.76 70
BACK VIEW
ISOMETRIC VIEW
SPECIFICATIONS System Type
Articulated Coaxial, ribbon driver, line array, two-way, single sealed enclosure
Driver Components
(6) 6” ribbon drivers + (6) 6.5” paper/Kevlar composite mid-bass drivers
Crossover
Passive, custom
Frequency Response¹
80Hz - 20kHz @ -6db
Maximum SPL
128db continuous, 138db peak
System Coverage
110 degrees horizontal, 20 degrees vertical (asymmetrical)
Sensitivity, 1m/2.83V
101db
Power Handling
720W AES, 1100W IEC long term, 1400W IEC short term
Recomended Amplifier Power @ 4ohms
500W-2000W (FTC) @ 4 ohms
Rated Impedance
6 ohms
Input Connectors
Screw terminal barrier strip and dual NL4 speakon connectors
Enclosure
Closed box alignment, 18 mm marine plywood, heavily damped and braced
Mounting Options
(17) M10 fly points, (4) M8 points for wall mount option
Accessories (optional)
Wall Mounting Kit(BKT-WM66) for multiple stacked arrays L Bracket Kit(BKT-L66) for flying arrays under DRM215 subwoofer(s) Coupling Brackets(BKT-CP66) Allen Products MM-060 / MM-120 for single box wall mounting
Dimensions, (H x W x D) inches (mm)
Height 38.03” (966 mm) Width 10.550” (268 mm) Depth 10.04” (255 mm)
Weight, net
60.0 lbs. (27kg)
Warranty
Limited 5-year warranty
The STX 4625 is a symmetrically curved Line Array featuring four high power 6.5� custom designed neodymium woofers and four advanced design planar magnetic Ribbon drivers in a coax configuration with a unique waveguide for wide 110 degrees horizontal coverage. Ultra-fast transient response and higher instantaneous peak level for faithful signal reproduction and improved dynamic range. The highly controlled vertical dispersion (symmetrical 25 degrees) of the array and excellent coupling of the ribbon drivers at high frequency yields the ultimate hi fidelity system when more vertical coverage is required. Couple with STX 6620 for extending vertical coverage without the need for additional an amplifier channel. True line array performance provides dramatically increased intelligibility in highly reverberant spaces. Single box construction with integrated fly points and internal passive crossover for lower cost installation. Improved front to back SPL over the entire audience area, typically +/- 2db
Stix and Drums LLC 1990 N. McCulloch Blvd. Ste. D222 Lake Havasu City, AZ Voice: 928.733.6002 Fax: 928.453.5550 info@stixanddrums.com www.stixanddrums.com
STX 4625 Specifications
7.165 182
1.693 43
M10 (17 Plc's.) Loop Output
Input
-
+
1.693 43
4.724 120
Input 4ohms
-
NL4 Speakon Connectors +
Loop Output
TM
Screw terminal barrier strip
By
Subwoofer Model STX 4625 Made in Phillppines
TOP VIEW INPUT PLATE 3.81 96.900
4.72 120
1.69 43
1.69 43
25.50 647
4.72 120
1.70 43
10.00 255
3.00 76.2
10.55 268
5.276 134
1.69 43
FRONT VIEW
SIDE VIEW
BACK VIEW
ISOMETRIC VIEW
SPECIFICATIONS System Type
Articulated Coaxial, ribbon driver, line array, two-way, single sealed enclosure
Driver Components
(4) 6” ribbon drivers + (4) 6.5” paper/Kevlar composite mid-bass drivers
Crossover
Passive, custom
Frequency Response¹
80Hz - 20kHz @ -6db
Maximum SPL
123db continuous, 133db peak
System Coverage
110 degree horizontal, 25 degrees vertical (asymmetrical)
Sensitivity, 1m/2.83V
93db, 96db @ 1w/1m
Power Handling
480W AES, 720W IEC long term, 950W IEC short term
Recomended Amplifier Power @ 4ohms
300W-1400W (FTC) @ 4 ohms
Rated Impedance
16 ohms
Input Connectors
Screw terminal barrier strip and dual NL4 speakon connectors
Enclosure
Closed box alignment, 18mm marine plywood, heavily damped and braced
Mounting Options
(17) M10 fly points. Coupling Brackets (BKTCP66) for use with STX6620 included
Accessories (optional)
L Bracket kit (BKT-L66) for mounting under or on DRM 215 subwoofer
Dimensions, (H x W x D) inches (mm)
Height 25.63” (651 mm) Width 10.55” (268 mm) Depth 10.04” (255 mm)
Weight, net
40 lbs. (18.0kg)
Warranty
Limited 5-year warranty
P The STX 4625P is a portable multi use symmetrically curved Array featuring four high power 6.5� custom designed neodymium woofers and four advanced design planar magnetic Ribbon drivers in a coax configuration with a unique waveguide for wide 110 degrees horizontal coverage. The highly controlled vertical dispersion (symmetrical 25 degrees) of the array and excellent coupling of the ribbon drivers at high frequency yields the ultimate hi fidelity system, with minimum room interaction. The STX4625P includes a 35mm adjustable (+/-) 18 degree top hat for pole mounting, pocket handles for easy transport and positioning and 16 M10 fly points for flying or virtually any mounting position. The STX 4625P and DRM115 companion subwoofer make the perfect portable system for playback or live sound in small to medium spaces. The STX4625P when used in it’s horizontal position is perfect for front fill and the convent 16 ohm impedance allows for four boxes per amp channel.
Stix and Drums LLC 1990 N. McCulloch Blvd. Ste. D222 Lake Havasu City, AZ Voice: 928.733.6002 Fax: 928.453.5550 info@stixanddrums.com www.stixanddrums.com
STX 4625P Specifications
7.165 182
1.693 43
M10 (17 Plc's.) Loop Output
Input
-
+
1.693 43
4.724 120
Input 4ohms
-
NL4 Speakon Connectors +
Loop Output
TM
Screw terminal barrier strip
By
Subwoofer Model STX 4625 Made in Phillppines
TOP VIEW INPUT PLATE 3.81 96.900
4.72 120
1.69 43
1.69 43
25.50 647
4.72 120
1.70 43
10.00 255
3.00 76.2
10.55 268
5.276 134
1.69 43
FRONT VIEW
SIDE VIEW
BACK VIEW
ISOMETRIC VIEW
SPECIFICATIONS System Type
Articulated Coaxial, ribbon driver, line array, two-way, single sealed enclosure
Driver Components
(4) 6” ribbon drivers + (4) 6.5” paper/Kevlar composite mid-bass drivers
Crossover
Passive, custom
Frequency Response¹
80Hz - 20kHz @ -6db
Maximum SPL
123db continuous, 133db peak
System Coverage
110 degree horizontal, 25 degrees vertical (asymmetrical)
Sensitivity, 1m/2.83V
93db, 96db @ 1w/1m
Power Handling
480W AES, 720W IEC long term, 950W IEC short term
Recomended Amplifier Power @ 4ohms
300W-1400W (FTC) @ 4 ohms
Rated Impedance
16 ohms
Input Connectors
Screw terminal barrier strip and dual NL4 speakon connectors
Enclosure
Closed box alignment, 18mm marine plywood, heavily damped and braced
Mounting Options
(16) M10 fly points. (1) M10 pull back point. 35mm adjustable (+/-) 18 degree top hat
Accessories (optional)
L Bracket kit (BKT-L66) for mounting under DRM 215 subwoofer
Dimensions, (H x W x D) inches (mm)
Height 25.63” (651 mm) Width 10.55” (268 mm) Depth 10.04” (255 mm)
Weight, net
40 lbs. (18.0kg)
Warranty
Limited 5-year warranty
DRM 115 Compact Low End The DRM 115 Compact Subwoofer is designed for portable use (companion for the STX4625P array) as well as permanent installation uses with it's 16 integrated 10mm fly points, handles, 35mm pole socket and installed rubber feet. The DRM115 delivers high output low frequency reinforcement when space is at a premium and uses one 15" long excursion high powered woofer with a dual layered 4" voice coil for exceptional reliability. The advanced uniquely braced cabinet design provides maximum output with less distortion and extended low frequency response.
Stix and Drums LLC 1990 N. McCulloch Blvd. Ste. D222 Lake Havasu City, AZ Voice: 928.733.6002 Fax: 928.453.5550 info@stixanddrums.com www.stixanddrums.com
DRM 115 Specifications
1.69 43.03
15.61 396.54
2.30 58.42
19.00 482.50
Loop Output
Input
-
+
9.56 242.89
-
NL4 Speakon Connectors +
Loop Output
TM
Screw terminal barrier strip
Subwoofer Model DRM 118 Made in Phillppines
9.50 241.30
INPUT PLATE
15.57 395.50
1.70 43.09
TOP VIEW
2.30 58.42
14.11 358.30
20.44 519.06
22.13 562
19.13 486.00
9.50 241.30
19.13 486.00 13.14 333.63
13.10 332.74
Input 4ohms
9.56 242.81
SIDE VIEW
FRONT VIEW
BACK VIEW
BOTTOM VIEW
ISOMETRIC VIEW
SPECIFICATIONS System Type
Subwoofer, vented enclosure, compact size, uniquely braced
Driver Components
1 x 15” low frequency driver with dual layer 4” voice coil and long excursion
Crossover
Recommended HPF=35hz 24db Butwrth. LPF with STX4625P 100hz 24db Butwrth
Frequency Response
38-300Hz @ -6db
Maximum SPL
126db SPL continuous / 132db SPL peak
Sensitivity, 1m/2.83V @1w/1m
98db (40-200Hz)
Power Handling
600W (AES) continuous / 1200W (IEC) short term
Recomended Amplifier Power @ 4ohms
800-2000W (FTC) @ 4ohms
Impedance
8 ohms
Input Connectors
Screw terminal barrier strip and dual NL4 speakon connectors
Enclosure
Vented box alignment, 18mm marine plywood, heavily damped and braced, Handles for ease of transport
Mounting Options
(16) M10 fly points, handles, rubber feet , 35mm pole socket
Dimensions, (H x W x D) inches (mm)
Height 22.13” (562 mm) Width 19.00” (482.5 mm) Depth 19.13” (486 mm)
Weight, net
66.0 lbs. (30kg)
Warranty
Limited 5-year warranty
PS115/4625P The Ultimate Portable System This Portable System is ideally suited for traveling bands, DJ's and smaller venues, where portability and high quality sound reinforcement are required. The STX 4625P is a symmetrically curved Line Array featuring four high power 6.5" custom designed neodymium woofers and six advanced design planar magnetic Ribbon drivers in a coax configuration with a unique waveguide for wide 110 degree horizontal coverage. DRM 115 subwoofer utilizes one 15" long excursion, high-powered woofer wth a dual layered 4" voice coil for exceptional accuracy, speed and reliability. Designed for high impact low frequency response. Complete specifications for STX4625P and DRM115 can be found in the Stix & Drums 2015 Catalog
Stix and Drums LLC 1990 N. McCulloch Blvd. Ste. D222 Lake Havasu City, AZ Voice: 928.733.6002 Fax: 928.453.5550 info@stixanddrums.com www.stixanddrums.com
PS115/4625P Specifications The STX4625P has an adjustable-angle receptacle located on the bottom of the enclosure. Vertical angle can be adjusted in 4ยบ increments to +/- 18ยบ. The adjustable mountingpole is adjustable in height from 31.5" to 52.5" and mounts between the top of the DRM 115 cabinet and the bottom of the STX4625P. Features include both a friction locking knob and a steel security pin. Complete specifications for STX4625P and DRM115 can be found in the Stix & Drums 2015 Catalog
31.50
52.50
36ยบ
FRONT VIEW
SIDE VIEW
SIDE VIEW
DRM 212 High Impact Mid Bass The DRM 212 is designed for high impact mid bass/LF reinforcement to 60hz. Sharing the same height and depth footprint as the STX6600 and STX6620 arrays, it is the perfect companion when more SPL and mid bass punch is required. The DRM212 uses two 12� long excursion high-powered woofers with a dual layered 4� voice coil for exceptional reliability. The advanced uniquely braced cabinet design provides maximum output with less distortion and extended low frequency response.
Stix and Drums LLC 1990 N. McCulloch Blvd. Ste. D222 Lake Havasu City, AZ Voice: 928.733.6002 Fax: 928.453.5550 info@stixanddrums.com www.stixanddrums.com
DRM 212 Specifications 14.17 360 Loop Output
10.04 255
Input
6.38 162 1.65 42
-
+
Input 4ohms
-
NL4 Speakon Connectors +
Loop Output
TM
7.24 183.77
1.69 43
TOP VIEW
Screw terminal barrier strip
Subwoofer Model DRM 118 Made in Phillppines
1.69 43
38.03 966
5.03 127.79
30.45 773.43
INPUT PLATE
10.04 255
BACK VIEW
1.20 30.50
3.94 100
11.77 299
2.05 52
SIDE VIEW
FRONT VIEW
BOTTOM VIEW
ISOMETRIC VIEW
SPECIFICATIONS System Type
High Power Bass Module, Vented enclosure uniquely braced
Driver Components
2 x 12” low frequency driver with dual layer 4” voice coil and long excursion
Crossover
Recommended HPF @ 60hz 24db Butwrth , LPF with Stix 200hz 24db LinkRil
Frequency Response
60 Hz - 350 kHz @ -6 dB
Maximum SPL
128db Continuous / 134db Peak
Sensitivity, 1m/2.83V @1w/1m
101 dB (80-250)
Power Handling
1200 W AES continous / 2400W IEC short term
Recomended Amplifier Power @ 4ohms
800-2000W (FTC) @ 4ohms
Impedance
4 ohms
Input Connectors
Screw terminal barrier strip and dual NL4 speakon connectors
Enclosure
Vented box alignment, 18mm marine plywood, heavily damped and braced, Handles
Mounting Options
(16) M10 fly points, (1) M10 pullback point. Coupling Brackets for multiple stacked units included. (BKT-CP66).
Accessories (optional)
Optional coupling Bracket for articulating multiple 212’s to match array (BKT-CP21266)
Dimensions, (H x W x D) inches (mm)
Height 38.03” (966 mm) Width 14.17” (360 mm) Depth 10.04” (255 mm)
Weight, net
95.0 lbs. (43.2kg)
Warranty
Limited 5-year warranty
Tight, Fast Low Frequency Response The DRM 215 subwoofer designed for high impact low frequency reinforcement uses two 15” long excursion high-powered woofers with a dual layered 4” voice coil for exceptional reliability. The advanced uniquely braced cabinet design provides maximum output with less distortion and extended low frequency response.
Stix and Drums LLC 1990 N. McCulloch Blvd. Ste. D222 Lake Havasu City, AZ Voice: 928.733.6002 Fax: 928.453.5550 info@stixanddrums.com www.stixanddrums.com
DRM 215 Specifications
1.693 43
26.85 682
Loop Output
Input
-
+
20.00 508.4
2.30 58.4
14.75 375
Input 4ohms
NL4 Speakon Connectors +
Loop Output
TM
By
Screw terminal barrier strip
Subwoofer Model DRM 215 Made in Phillppines
TOP VIEW
20.00 508.5
2.95 75
8.75 222
35.59 904
40.00 990
INPUT PLATE
14.76 375
1.69 43
30.25 768
-
7.87 200
1.69 43
15.12 384
11.77 299
BACK VIEW
3.94 100
14.76 375
2.95 75
1.69 43
9.25 234.5
SIDE VIEW 4.03 102.4
FRONT VIEW
BOTTOM VIEW
M10 (20 Plc's.)
ISOMETRIC VIEW
SPECIFICATIONS System Type
Subwoofer, vented enclosure, large displacement, uniquely braced
Driver Components
2 x 15” low frequency drivers with dual layer 4” voice coils and long excursion
Crossover
Recommended HPF=30hz 24db Butwrth. LPF with Stix 120hz 24db Butwrth
Frequency Response
32-300Hz @ -6db
Maximum SPL
131db SPL continuous / 137db SPL peak
Sensitivity, 1m/2.83V
103db (40-150Hz)
Power Handling
1200W (AES) continuous / 2400W (IEC) short term
Recomended Amplifier Power @ 4ohms
800-2000W (FTC) @ 4 ohms
Impedance
4 ohms
Input Connectors
Screw terminal barrier strip and dual NL4 speakon connectors
Enclosure
Vented box alignment, 18mm marine plywood, heavily damped and braced, Handles for ease of transport
Mounting Options
(16) M10 fly points, (4) M10 mounting for optional bracket. Rubber feet with mounting screws included
Accessories (optional)
(BKT-L66) Optional mounting bracket for STIX arrays
Dimensions, (H x W x D) inches (mm)
Height 39.00” (990 mm) Width 30.25” (768 mm) Depth 20.00” (508.4 mm)
Weight, net
127.6 lbs. (58kg)
Warranty
Limited 5-year warranty
Clean Extended Low Frequency Response The DRM 118 subwoofer is designed for high impact low frequency reinforcement, it uses one 18� long excursion high-powered woofer with a dual layered inside/outside 4� voice coil for exceptional reliability and heat dissipation. The advanced uniquely braced cabinet design provides maximum output with less distortion and extended low frequency response.
Stix and Drums LLC 1990 N. McCulloch Blvd. Ste. D222 Lake Havasu City, AZ Voice: 928.733.6002 Fax: 928.453.5550 info@stixanddrums.com www.stixanddrums.com
DRM 118 Specifications 30.24 768
1.69
28.54 725
43
Loop Output
Input
-
+
1.72 43.800
21.03 534.250
23.94 608
Input 4ohms
TM
INPUT PLATE
TOP VIEW 15.12 384
18.07 459
43.800
7.00 180.0
Screw terminal barrier strip
Subwoofer Model DRM 118 Made in Phillppines
534.250 1.72
24.25 616 1.69 43
NL4 Speakon Connectors +
Loop Output
By
21.03
25.94 659
-
11.81 300.00
23.94 608
FRONT VIEW
BACK VIEW
SIDE VIEW
BOTTOM VIEW
ISOMETRIC VIEW
SPECIFICATIONS System Type
Subwoofer, vented enclosure, uniquely braced, large displacement
Driver Components
1 x 18” low frequency driver with dual layer 4” voice coil and long excursion
Crossover
Recommended HPF=25hz 24db Butwrth. LPF with Stix 100hz 24db Butwrth
Frequency Response
26-300Hz @ -6db
Maximum SPL
126db SPL continuous / 132db SPL peak
Sensitivity, 1m/2.83V @1w/1m
95db (40-150Hz)
Power Handling
1000W (AES) continuous / 2000W (IEC) short term
Recomended Amplifier Power @ 4ohms
800-2000W (FTC) @ 4ohms
Impedance
8 ohms
Input Connectors
Screw terminal barrier strip and dual NL4 speakon connectors
Enclosure
Vented box alignment, 18mm marine plywood, heavily damped and braced, Handles for ease of transport
Mounting Options
(16) M10 fly points, Rubber feet with mounting screws included for user placement
Dimensions, (H x W x D) inches (mm)
Height 25.94” (659 mm) Width 30.25” (768 mm) Depth 23.94” (608 mm)
Weight, net
83.6lbs. (38kg)
Warranty
Limited 5-year warranty