Manual de serviço tv lcd philips 50pfl4909 f7 chassis pl14 24 by Portal da Eletrônica

50â&#x20AC;? LCD TV chassis PL14.24

Service Manual Contents 50PFL4909/F7

PHILIPS

(Serial No.: DS1)

ÂŠ 2014 Funai Electric Co., Ltd. All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes. with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law. 140306

IMPORTANT SAFETY NOTICE Proper service and repair is important to the safe, reliable operation of all P&F Equipment. The service procedures recommended by P&F and described in this service manual are effective methods of performing service operations. Some of these service special tools should be used when and as recommended. It is important to note that this service manual contains various CAUTIONS and NOTICES which should be carefully read in order to minimize the risk of personal injury to service personnel. The possibility exists that improper service methods may damage the equipment. It also is important to understand that these CAUTIONS and NOTICES ARE NOT EXHAUSTIVE. P&F could not possibly know, evaluate and advice the service trade of all conceivable ways in which service might be done or of the possible hazardous consequences of each way. Consequently, P&F has not undertaken any such broad evaluation. Accordingly, a servicer who uses a service procedure or tool which is not recommended by P&F must first use all precautions thoroughly so that neither his safety nor the safe operation of the equipment will be jeopardized by the service method selected.

The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a tiny spec of color. This is not to be considered a defect in the LCD screen.

TABLE OF CONTENTS Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Important Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Standard Notes for Servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Cabinet Disassembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Electrical Adjustment Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 How to Initialize the LCD TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 Firmware Renewal Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 Block Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1 Schematic Diagrams / CBA and Test Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1 Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1 Exploded Views. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1 Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1 Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-1

SPECIFICATIONS < TUNER / NTSC > Description

Condition

Unit

Nominal

Limit

---

MHz

±2.3

±2.1

TV.ch.4 CA.ch.31 CA.ch.87

dBµV dBµV dBµV

18 18 18

20 20 23

Condition

Unit

Nominal

Limit

---

kHz

---

±100

ch.4 ch.10 ch.41

dBm dBm dBm

-------

-76/0 -76/0 -76/+4

Description

Condition

Unit

Nominal

Limit

1. Native Pixel Resolution

Horizontal Vertical

pixels pixels

1920 1080

-----

cd/m2

300

---

Horizontal Vertical

° °

-88 to 88 -88 to 88

-----

Condition

Unit

Nominal

Limit

Horizontal Vertical

% %

5 5

5±5 5±5

--x y

°K

12000 0.272 0.278

--±3% ±3%

1. AFT Pull-In Range 2. Synchronizing Sens.

< TUNER / ATSC > Description 1. Received Freq. Range (-28dBm) 2. ATSC Dynamic Range (min / max)

< LCD PANEL >

2. Brightness (w / filter) 3. Viewing Angle

< VIDEO > Description 1. Over Scan

2. Color Temperature

3. Resolution (composite video)

<Measurement condition> Input signal: HDMI1 Raster (40/70IRE) 1080i@60 Measurement point: Screen center Measuring instrument: Made of KONICA MINOLTA Luminance meter CA-310 Aging time: 60min. (Retail MODE / 100IRE Raster HDMI 1080i@60) MODE setting of TV: Shipment setting / Retail MODE Ambient temperature: 25°C ±5°C Horizontal Vertical

line line

400 350

-----

< AUDIO > All items are measured across 8 Ω load at speaker output terminal with L.P.F. Description

Condition

Unit

Nominal

Limit

1. Audio MAX Output (ATSC 0dBfs)

Lch/Rch

10.0/10.0

8.0/8.0

500mW: Lch/Rch

0.5/0.5

2.0/2.0

2. Audio Distortion (NTSC)

1-1

PL14.22SP

IMPORTANT SAFETY PRECAUTIONS Prior to shipment from the factory, our products are strictly inspected for recognized product safety and electrical codes of the countries in which they are to be sold. However, in order to maintain such compliance, it is equally important to implement the following precautions when a set is being serviced.

Safety Precautions for LCD TV Circuit

d. Leakage Current Hot Check - With the instrument completely reassembled, plug the AC line cord directly into a 120 V AC outlet. (Do not use an isolation transformer during this test.) Use a leakage current tester or a metering system that complies with American National Standards Institute (ANSI) C101.1 Leakage Current for Appliances and Underwriters Laboratories (UL) 1410, (50.7). With the instrument AC switch first in the on position and then in the off position, measure from a known earth ground (metal water pipe, conduit, etc.) to all exposed metal parts of the instrument (antennas, handle brackets, metal cabinet, screw heads, metallic overlays, control shafts, etc.), especially any exposed metal parts that offer an electrical return path to the chassis. Any current measured must not exceed 0.5 milli-ampere. Reverse the instrument power cord plug in the outlet and repeat the test.

1. Before returning an instrument to the customer, always make a safety check of the entire instrument, including, but not limited to, the following items: a. Be sure that no built-in protective devices are defective and have been defeated during servicing. (1) Protective shields are provided on this chassis to protect both the technician and the customer. Correctly replace all missing protective shields, including any removed for servicing convenience. (2) When reinstalling the chassis and/or other assembly in the cabinet, be sure to put back in place all protective devices, including but not limited to, nonmetallic control knobs, insulating fishpapers, adjustment and compartment covers/shields, and isolation resistor/capacitor networks. Do not operate this instrument or permit it to be operated without all protective devices correctly installed and functioning. Servicers who defeat safety features or fail to perform safety checks may be liable for any resulting damage.

READING SHOULD NOT BE ABOVE 0.5 mA DEVICE BEING TESTED

b. Be sure that there are no cabinet openings through which an adult or child might be able to insert their fingers and contact a hazardous voltage. Such openings include, but are not limited to, (1) spacing between the Liquid Crystal Panel and the cabinet mask, (2) excessively wide cabinet ventilation slots, and (3) an improperly fitted and/or incorrectly secured cabinet back cover.

LEAKAGE CURRENT TESTER

TEST ALL EXPOSED METAL SURFACES

ALSO TEST WITH PLUG REVERSED USING AC ADAPTER PLUG AS REQUIRED

c. Antenna Cold Check - With the instrument AC plug removed from any AC source, connect an electrical jumper across the two AC plug prongs. Place the instrument AC switch in the on position. Connect one lead of an ohmmeter to the AC plug prongs tied together and touch the other ohmmeter lead in turn to each tuner antenna input exposed terminal screw and, if applicable, to the coaxial connector. If the measured resistance is less than 1.0 megohm or greater than 5.2 megohm, an abnormality exists that must be corrected before the instrument is returned to the customer. Repeat this test with the instrument AC switch in the off position.

EARTH GROUND

ANY MEASUREMENTS NOT WITHIN THE LIMITS SPECIFIED HEREIN INDICATE A POTENTIAL SHOCK HAZARD THAT MUST BE ELIMINATED BEFORE RETURNING THE INSTRUMENT TO THE CUSTOMER OR BEFORE CONNECTING THE ANTENNA OR ACCESSORIES. 2. Read and comply with all caution and safetyrelated notes on or inside the receiver cabinet, on the receiver chassis, or on the Liquid Crystal Panel. 2-1

LTVN_ISP

7. Product Safety Notice - Some electrical and mechanical parts have special safety-related characteristics which are often not evident from visual inspection, nor can the protection they give necessarily be obtained by replacing them with components rated for higher voltage, wattage, etc. Parts that have special safety characteristics are identified by a # on schematics and in parts lists. Use of a substitute replacement that does not have the same safety characteristics as the recommended replacement part might create shock, fire, and/or other hazards. The product's safety is under review continuously and new instructions are issued whenever appropriate. Prior to shipment from the factory, our products are strictly inspected to confirm they comply with the recognized product safety and electrical codes of the countries in which they are to be sold. However, in order to maintain such compliance, it is equally important to implement the following precautions when a set is being serviced.

3. Design Alteration Warning - Do not alter or add to the mechanical or electrical design of this TV receiver. Design alterations and additions, including, but not limited to circuit modifications and the addition of items such as auxiliary audio and/or video output connections, might alter the safety characteristics of this receiver and create a hazard to the user. Any design alterations or additions will void the manufacturer's warranty and may make you, the servicer, responsible for personal injury or property damage resulting therefrom. 4. Hot Chassis Warning a. Some TV receiver chassis are electrically connected directly to one conductor of the AC power cord and maybe safety-serviced without an isolation transformer only if the AC power plug is inserted so that the chassis is connected to the ground side of the AC power source. To confirm that the AC power plug is inserted correctly, with an AC voltmeter, measure between the chassis and a known earth ground. If a voltage reading in excess of 1.0 V is obtained, remove and reinsert the AC power plug in the opposite polarity and again measure the voltage potential between the chassis and a known earth ground. b. Some TV receiver chassis normally have 85V AC(RMS) between chassis and earth ground regardless of the AC plug polarity. This chassis can be safety-serviced only with an isolation transformer inserted in the power line between the receiver and the AC power source, for both personnel and test equipment protection. c. Some TV receiver chassis have a secondary ground system in addition to the main chassis ground. This secondary ground system is not isolated from the AC power line. The two ground systems are electrically separated by insulation material that must not be defeated or altered. 5. Observe original lead dress. Take extra care to assure correct lead dress in the following areas: a. near sharp edges, b. near thermally hot parts-be sure that leads and components do not touch thermally hot parts, c. the AC supply, d. high voltage, and, e. antenna wiring. Always inspect in all areas for pinched, out of place, or frayed wiring. Check AC power cord for damage. 6. Components, parts, and/or wiring that appear to have overheated or are otherwise damaged should be replaced with components, parts, or wiring that meet original specifications. Additionally, determine the cause of overheating and/or damage and, if necessary, take corrective action to remove any potential safety hazard.

2-2

LTVN_ISP

Precautions during Servicing A. Parts identified by the # symbol are critical for safety. Replace only with part number specified. B. In addition to safety, other parts and assemblies are specified for conformance with regulations applying to spurious radiation. These must also be replaced only with specified replacements. Examples: RF converters, RF cables, noise blocking capacitors, and noise blocking filters, etc. C. Use specified internal wiring. Note especially: 1) Wires covered with PVC tubing 2) Double insulated wires 3) High voltage leads D. Use specified insulating materials for hazardous live parts. Note especially: 1) Insulation Tape 2) PVC tubing 3) Spacers 4) Insulators for transistors. E. When replacing AC primary side components (transformers, power cord, etc.), wrap ends of wires securely about the terminals before soldering. F. Observe that the wires do not contact heat producing parts (heat sinks, oxide metal film resistors, fusible resistors, etc.) G. Check that replaced wires do not contact sharp edged or pointed parts. H. When a power cord has been replaced, check that 11~13 lb (5~6 kg) of force in any direction will not loosen it. I.

Also check areas surrounding repaired locations.

J. Use care that foreign objects (screws, solder droplets, etc.) do not remain inside the set. K. When connecting or disconnecting the internal connectors, first, disconnect the AC plug from the AC supply outlet. L. When installing parts or assembling the cabinet parts, be sure to use the proper screws and tighten certainly.

2-3

LTVN_ISP

Safety Check after Servicing Examine the area surrounding the repaired location for damage or deterioration. Observe that screws, parts and wires have been returned to original positions. Afterwards, perform the following tests and confirm the specified values in order to verify compliance with safety standards.

1. Clearance Distance When replacing primary circuit components, confirm specified clearance distance (d) and (d') between soldered terminals, and between terminals and surrounding metallic parts. (See Fig. 1)

Chassis or Secondary Conductor Primary Circuit

Table 1: Ratings for selected area AC Line Voltage

Region

Clearance Distance (d), (d’)

110 to 130 V

U.S.A. or Canada

≥ 3.2 mm (0.126 inches)

Note: This table is unofficial and for reference only. Be sure to confirm the precise values.

Fig. 1

2. Leakage Current Test Confirm the specified (or lower) leakage current between B (earth ground, power cord plug prongs) and externally exposed accessible parts (RF terminals, antenna terminals, video and audio input and output terminals, microphone jacks, earphone jacks, etc.) is lower than or equal to the specified value in the table below.

Exposed Accessible Part Z AC Voltmeter (High Impedance)

Measuring Method: (Power ON) Insert load Z between B (earth ground, power cord plug prongs) and exposed accessible parts. Use an AC voltmeter to measure across both terminals of load Z. See Fig. 2 and following table.

Earth Ground Power Cord Plug Prongs Fig. 2

Table 2: Leakage current ratings for selected areas AC Line Voltage

Region

Load Z

Leakage Current (i)

Earth Ground (B) to:

110 to 130 V

U.S.A. or Canada

0.15 µF CAP. & 1.5 kΩ RES. Connected in parallel

i ≤ 0.5 mA rms

Exposed accessible parts

Note: This table is unofficial and for reference only. Be sure to confirm the precise values.

2-4

LTVN_ISP

STANDARD NOTES FOR SERVICING Circuit Board Indications

How to Remove / Install Flat Pack-IC

1. The output pin of the 3 pin Regulator ICs is indicated as shown.

1. Removal With Hot-Air Flat Pack-IC Desoldering Machine:

Top View Out

1. Prepare the hot-air flat pack-IC desoldering machine, then apply hot air to the Flat Pack-IC (about 5 to 6 seconds). (Fig. S-1-1)

Bottom View In

Input

2. For other ICs, pin 1 and every fifth pin are indicated as shown.

5 Pin 1

10 3. The 1st pin of every male connector is indicated as shown.

Fig. S-1-1 2. Remove the flat pack-IC with tweezers while applying the hot air.

Pin 1

3. Bottom of the flat pack-IC is fixed with glue to the CBA; when removing entire flat pack-IC, first apply soldering iron to center of the flat pack-IC and heat up. Then remove (glue will be melted). (Fig. S-1-6)

Pb (Lead) Free Solder

4. Release the flat pack-IC from the CBA using tweezers. (Fig. S-1-6)

Pb free mark will be found on PCBs which use Pb free solder. (Refer to figure.) For PCBs with Pb free mark, be sure to use Pb free solder. For PCBs without Pb free mark, use standard solder.

CAUTION: 1. The Flat Pack-IC shape may differ by models. Use an appropriate hot-air flat pack-IC desoldering machine, whose shape matches that of the Flat Pack-IC. 2. Do not supply hot air to the chip parts around the flat pack-IC for over 6 seconds because damage to the chip parts may occur. Put masking tape around the flat pack-IC to protect other parts from damage. (Fig. S-1-2)

Pb free mark

3-1

TVN_SN

With Soldering Iron:

3. The flat pack-IC on the CBA is affixed with glue, so be careful not to break or damage the foil of each pin or the solder lands under the IC when removing it.

CBA

1. Using desoldering braid, remove the solder from all pins of the flat pack-IC. When you use solder flux which is applied to all pins of the flat pack-IC, you can remove it easily. (Fig. S-1-3)

Hot-air Flat Pack-IC Desoldering Machine

Flat Pack-IC

Desoldering Braid

Soldering Iron Masking Tape Tweezers

Flat Pack-IC

Fig. S-1-3 2. Lift each lead of the flat pack-IC upward one by one, using a sharp pin or wire to which solder will not adhere (iron wire). When heating the pins, use a fine tip soldering iron or a hot air desoldering machine. (Fig. S-1-4)

Fig. S-1-2

Sharp Pin Fine Tip Soldering Iron

Fig. S-1-4

3-2

TVN_SN

With Iron Wire:

2. Installation

1. Using desoldering braid, remove the solder from all pins of the flat pack-IC. When you use solder flux which is applied to all pins of the flat pack-IC, you can remove it easily. (Fig. S-1-3)

1. Using desoldering braid, remove the solder from the foil of each pin of the flat pack-IC on the CBA so you can install a replacement flat pack-IC more easily.

2. Affix the wire to a workbench or solid mounting point, as shown in Fig. S-1-5.

2. The â&#x20AC;&#x153; I â&#x20AC;? mark on the flat pack-IC indicates pin 1. (See Fig. S-1-7.) Be sure this mark matches the pin 1 on the PCB when positioning for installation. Then presolder the four corners of the flat pack-IC. (See Fig. S-1-8.)

3. While heating the pins using a fine tip soldering iron or hot air blower, pull up the wire as the solder melts so as to lift the IC leads from the CBA contact pads as shown in Fig. S-1-5.

3. Solder all pins of the flat pack-IC. Be sure that none of the pins have solder bridges.

4. Bottom of the flat pack-IC is fixed with glue to the CBA; when removing entire flat pack-IC, first apply soldering iron to center of the flat pack-IC and heat up. Then remove (glue will be melted). (Fig. S-1-6)

Example :

5. Release the flat pack-IC from the CBA using tweezers. (Fig. S-1-6) Note: When using a soldering iron, care must be taken to ensure that the flat pack-IC is not being held by glue. When the flat pack-IC is removed from the CBA, handle it gently because it may be damaged if force is applied.

Pin 1 of the Flat Pack-IC is indicated by a " " mark.

Hot Air Blower

Fig. S-1-7

Presolder

Iron Wire

Soldering Iron To Solid Mounting Point Fig. S-1-5 Flat Pack-IC CBA CBA

Fig. S-1-8

Fine Tip Soldering Iron

Flat Pack-IC Tweezers Fig. S-1-6

3-3

TVN_SN

Instructions for Handling Semiconductors Electrostatic breakdown of the semi-conductors may occur due to a potential difference caused by electrostatic charge during unpacking or repair work.

1. Ground for Human Body Be sure to wear a grounding band (1 MΩ) that is properly grounded to remove any static electricity that may be charged on the body.

2. Ground for Workbench Be sure to place a conductive sheet or copper plate with proper grounding (1 MΩ) on the workbench or other surface, where the semi-conductors are to be placed. Because the static electricity charge on clothing will not escape through the body grounding band, be careful to avoid contacting semi-conductors with your clothing.

CBA

Grounding Band

1MΩ

CBA

1MΩ Conductive Sheet or Copper Plate

3-4

TVN_SN

CABINET DISASSEMBLY INSTRUCTIONS Screw Torque Specification Ref. No.

Part Number

L10 GCHP3120 L23 GBJS3060 L28 GCHS3080 L45

FPH34100

SSK1 1ESA34506

Step/ Loc. No.

Tightening Torque

Part Name

SCREW F-PAN BLACK_NI +P-TITE M3X12.0 SCREW BIND 3CHROM +S-TITE M3X6.0 5.2±0.9lb·in SCREW F-PAN BLACK_NI +S-TITE M3X8.0 SEMS-SW PAN BLACK_NI + M4X10.0 STAND SCREW KIT (approx. (SEMS-SW PAN BLACK_NI 8.7±0.9lb·in)* + M4X12.0)

* For reference

1. Disassembly Flowchart This flowchart indicates the disassembly steps for the cabinet parts and the CBA in order to gain access to items to be serviced. When reassembling, follow the steps in reverse order. Bend, route and dress the cables as they were. [1] Stand Base Assembly [9] Function CBA Unit

[4] Power Supply CBA

[3] Rear Cabinet L

[5] Digital Main CBA Unit

[7] Speaker

[6] Stand Bracket

[5]

4(S-9), CN3105, Digital Main D2 CN3801, CN3906, CBA Unit D5 Jack Holder

---

[6]

Stand Bracket

D3 ---------------

---

[7]

Speaker

D3 ----------------

---

[8]

Speaker Holder

D3 2(S-10)

---

[9]

Function CBA Unit

CN4051, Function D3 Knob, Knob Frame, D5 Hook

[10]

IR Sensor CBA Unit

D3 Sensor Shield, Hook D5

[11]

LCD Panel Assembly

Decoration Plate, D4 Leading Edge Cover, LED Lens, Hook

↓ (1)

↓ (2)

↓ (3)

↓ (4)

↓ (5)

(3) Fig. No. showing procedure of part location (4) Identification of parts to be removed, unhooked, unlocked, released, unplugged, unclamped, or desoldered. P = Spring, L = Locking Tab, S = Screw, H = Hex Screw, CN = Connector e.g. 2(S-2) = two Screws of (S-2), 2(L-2) = two Locking Tabs of (L-2)

[10] IR Sensor CBA Unit

Fig. No.

Note

(2) Parts to be removed or installed.

2. Disassembly Method Part

Removal

(1) Order of steps in procedure. When reassembling, follow the steps in reverse order. These numbers are also used as the Identification (location) No. of parts in figures.

[11] LCD Panel Assembly

Step/ Loc. No.

Fig. No.

Note:

[2] Rear Cabinet R

[8] Speaker Holder

Part

Removal

(5) Refer to the following “Reference Notes in the Table.” Note

[1]

Stand Base D1 8(S-1), Stand Neck Assembly

---

[2]

Rear Cabinet R

10(S-2), 6(S-3), 2(S-4), 10(L-1)

---

[3]

Rear Cabinet L

6(S-5), 4(S-6), 2(S-7), 8(L-2)

---

[4]

Power Supply CBA

5(S-8), CN501, D2 CN601, CN1101, D5 CN1301

---

4-1

PL14.24-A_DC

Important precautions concerning the LCD Panel Assembly: 1. When you disassemble/re-assemble the LCD Panel Assembly • Do not pull the FFC Cable and Board Cable forcefully when you re-assemble. • Be careful not to scratch the display panel when assembling. 2. When you disassemble/re-assemble the Function CBA Unit or the IR Sensor CBA Unit • Be careful not to break the hooks. If you pull with too much force, the hooks may be damaged. • Make sure the hooks are securely in place when assembling. • The Function CBA Unit, Function Knob and Knob Frame are fixed in place by the hooks. Make sure these hooks are not damaged. Make sure the Function CBA Unit, Function Knob and Knob Frame are securely in place when re-assembling. • The IR Sensor CBA Unit and Sensor Shield are fixed in place by the hooks. Make sure these hooks are not damaged. Make sure the IR Sensor CBA Unit and Sensor Shield are securely in place when re-assembling.

4-2

PL14.24-A_DC

(L-2)

(S-5)

(L-2) (L-1)

(S-6)

[3] Rear Cabinet L (S-7)

(S-2)

[2] Rear Cabinet R

(L-1)

(S-4) (L-1) (S-3)

Stand Neck (S-1)

[1] Stand Base Assembly

(S-1)

Fig. D1

4-3

PL14.24-A_DC

[5] Digital Main CBA Unit Jack Holder

(S-9)

[4] Power Supply CBA

(S-8)

Fig. D2

4-4

PL14.24-A_DC

[8] Speaker Holder

Hook*2

[10] IR Sensor CBA Unit*2

(S-10)

Sensor Shield*2

[6] Stand Bracket (S-10)

[9] Function CBA Unit*2 Function

[7] Speaker

Hook*2

Knob*2 Knob Frame*2

Fig. D3 *2: Make sure to read all the precautions on page 4-2 when you disassemble/re-assemble the Function CBA Unit or the IR Sensor CBA Unit.

4-5

PL14.24-A_DC

[11] LCD Panel Assembly*1

Decoration Plate*1

Leading Edge Cover*1

LED Lens*1 Hook*1

Fig. D4 *1: Make sure to read all the precautions on page 4-2 when you disassemble/re-assemble the LCD Panel Assembly.

4-6

PL14.24-A_DC

TV Cable Wiring Diagram

To LCD Panel Assembly

Power Supply CBA

Digital Main CBA Unit

CN1101 CN3906

CN1301

CN501

CN3601

Function CBA Unit CN601 CN3105

CN3801

To AC Cord To Speaker CN4051

IR Sensor CBA Unit CN4052 CN4001

Fig. D5

4-7

PL14.24-A_DC

ELECTRICAL ADJUSTMENT INSTRUCTIONS 1. Purity Check Mode

General Note: “CBA” is abbreviation for “Circuit Board Assembly.”

This mode cycles through full-screen displays of red, green, blue, and white to check for non-active pixels.

Note: Electrical adjustments are required after replacing circuit components and certain mechanical parts. It is important to perform these adjustments only after all repairs and replacements have been completed. Also, do not attempt these adjustments unless the proper equipment is available.

1. Enter the service mode. 2. Each time the [7] button on the remote control unit is pressed, the display changes as follows.

Purity Check Mode White mode

Test Equipment Required

[7] button

1. Remote control unit 2. Color Analyzer, CA-310 (KONICA MINOLTA Luminance meter) or measuring instrument as good as CA-310.

[7] button Black mode

How to set up the service mode: Service mode: 1. Turn the power on. 2. Press [0], [6], [2], [5], [9], [6] and [INFO] buttons on the remote control unit in this order. The following screen appears.

[7] button White 50% mode

"*" differs depending on the models.

[current] File code: Total checksum: Panel-Option code:

***-****_***_* Push "0" key **-***-***-***-***-*** ***-***-***-***-***

[7] button Red, Green, Blue mode

Press "POWER" key to exit. MAC address: ESN: Flicker: Tuner: HDMI UART: Touch Sensor Ver: EDID:

***** **** OFF ------ / -.--.-Push "0" key

**:**:**:**:**:** *****************************

Total Watch Time: ***** System Time: **:** Lightsensor: **

[7] button V-ramp mode

[7] button White 20% mode

Note: When entering this mode, the default setting is White mode.

3. To cancel or to exit from the Purity Check Mode, press [CH RETURN] or [PREV CH] button. 4. 5-1

PL14.22EA

The White Balance Adjustment should be performed when replacing the LCD Panel or Digital Main CBA.

5. Press [3] button to select the “HDB” for High Drive Blue adjustment. (“HDB” appears in the screen.) 6. Press [MENU] button. The internal Raster signal appears in the screen. (“Internal (Single)” appears in the upper right of the screen as shown below.)

2. White Balance Adjustment Purpose: To mix red and blue beams correctly for pure white.

Internal (Single)

Symptom of Misadjustment: White becomes bluish or reddish. ITEM

SPECIFICATION

Color temperature

x= 0.272 ± 0.003 y= 0.278 ± 0.003

Input Signal

Internal pattern (30/50/80% raster)

HDB

7. Press [CHANNEL UP/DOWN] buttons to adjust the color temperature becomes 12000°K (x= 0.272 / y= 0.278 ± 0.003).

Measurement point Screen center M. EQ.

CA-310 (KONICA MINOLTA Luminance meter) or measuring instrument as good as CA-310.

Aging time

60min. (Retail MODE/100IRE Raster HDMI 1080i@60)

MODE setting of TV

Shipment setting/ Retail MODE

Ambient temperature

25°C ± 5°C

8. Press [1] button to select the “HDR” for High Drive Red adjustment (“HDR” appears in the screen.) and press [CHANNEL UP/DOWN] buttons to adjust the color temperature. 9. If necessary, adjust the “HDB” or “HDR” again 10. Press [6] button to select the “MDB” for Middle Drive Blue adjustment (“MDB” appears in the screen.) and press [CHANNEL UP/DOWN] buttons to adjust the color temperature.

1. Operate the unit for more than 30 minutes.

Internal (Single)

2. Enter the service mode. 3. Press [VOLUME DOWN] button three times on the remote control unit to select “Drive setting” mode. “Drive-” appears in the screen. 4. Set the color analyzer at the CHROMA mode and zero point calibration. Bring the optical receptor pointing at the center of the LCD-Panel.

MDB

11. Press [4] button to select the “MDR” for Middle Drive Red adjustment (“MDR” appears in the screen.) and press [CHANNEL UP/DOWN] buttons to adjust the color temperature.

To avoid interference from ambient light, this adjustment should be performed in a dark room. Perpendicularity

12. If necessary, adjust the “MDB” or “MDR” again.

Color Analyzer Note: The optical receptor must be set perpendicularly to the LCD Panel surface.

5-2

PL14.22EA

13. Press [9] button to select the “LDB” for Low Drive Blue adjustment (“LDB” appears in the screen.) and press [CHANNEL UP/DOWN] buttons to adjust the color temperature.

Internal (Single)

LDB

14. Press [7] button to select the “LDR” for Low Drive Red adjustment (“LDR” appears in the screen.) and press [CHANNEL UP/DOWN] buttons to adjust the color temperature. 15. If necessary, adjust the “LDB” or “LDR” again. 16. Press [VOLUME DOWN] button to shift to the “Debugging Message” mode. If there is no message under “[WB]” section, this adjustment completes. If “Drive settings are NG. Retry again.” is displayed, repeat above steps from 5. to 15. Then check “Debugging Message” again. If “Drive settings are NG. Retry again.” is displayed, replace the LCD Panel or Digital Main CBA. 17. To cancel or to exit from the White Balance Adjustment, press [CH RETURN] or [PREV CH] button.

5-3

PL14.22EA

HOW TO INITIALIZE THE LCD TV The purpose of initialization is to place the set in a new out of box condition. The customer will be prompted to select a language and program channels after the set has been initialized. To put the program back at the factory-default, initialize the LCD TV using the following procedure. NOTE: Disconnect any device from the USB Port before you conduct on this procedure. 1. Turn the power on. 2. Enter the service mode. - To cancel the service mode, press [ ] button on the remote control unit. 3. Press [BACK] button to enter the Control Panel Key Confirmation Menu. 4. Press all buttons on the control panel. 5. Press [INFO] button to proceed with the self check mode. 6. Make sure to confirm the "INITIALIZED : OK" appears in the green screen. 7. Unplug the AC Cord and plug it back on again.

6-1

PL14.24INT

FIRMWARE RENEWAL MODE Equipment Required

Update file selection screen appears as follows. (Files included in the USB storage device are displayed.)

a. USB storage device b. Remote Control Unit

Firmware Update Procedure

"*" differs depending on the models.

1. Turn the power off and unplug the AC Cord. 2. Insert the USB storage device to the USB port as shown below.

Select an upgrade file

*****_******.upg *****_******.upg *****_******.upg

Rear Cabinet (example) USB port

Cancel

1 23

Note: To cancel the update mode, select “Cancel” and press the [OK] button. 10. Select the file and press [OK] button. 11. The update will start and the following will appear in the screen.

USB storage device

"*" differs depending on the models.

Current Version: ***-****-***-* New Version: ***-****-***-*

3. Plug the AC Cord and turn the power on. 4. After few seconds, the menu mode will appear in the screen.

5. 6. 7. 8. 9.

Are you sure you want to update?

Note: After 30 seconds without an operation, the menu mode will disappear automatically. To display the menu mode again, press the [MENU] button on the remote control unit. Select “Setup” and press the [OK] button to display the setup menu. Select “Software”. Select “Software update”. Select “USB”. Press the [OK] button on the remote control unit to enter the update mode.

Yes

Note: If the above screen isn’t displayed, repeat from step 1. 12. Select “Yes” and press the [OK] button to update. Note: Do not remove the USB storage device or turn the TV off while update is in progress. 13. When the firmware update is completed, the following will appear in the screen.

Update your TV with new software:

Done

Software update is successful. Please remove the USB storage device and restart the TV set.

Remove the USB storage device from the USB port. Turn the power off and turn the power on again.

7-1

PL14.22FW

TROUBLESHOOTING [Power Supply Section] FLOW CHART NO.1 The power cannot be turned on. No

Is the fuse (F602) normal?

See FLOW CHART No.2 <The fuse blows out.>

Yes

Is normal state restored when once unplugged power cord is plugged again after several seconds?

Yes Is the P-ON+21V line voltage normal?

Check if there is any leak or short-circuit on the primary circuit component and repair it if defective. (C625, C665, D601, D602, D603, D604, D605, D606, D607, D613, D618, D621A, D623, D664A, IC601, IC604, Q601, Q602, Q603, T601, R630, R631)

Yes

Check each rectifying circuit of the secondary circuit and repair it if defective.

FLOW CHART NO.2 The fuse blows out.

Check if there is any leak or short-circuit on the primary circuit component and repair it if defective.

Check if there is any leak or short-circuit on the each rectifying circuit component of secondary side and repair it if defective.

Make sure to repair the primary circuit component before replacing the fuse(F602).

FLOW CHART NO.3 When the output voltage fluctuates.

Does the photocoupler circuit on the secondary side operate normally?

Check IC602, D660 and their periphery circuit. Repair it if defective.

Yes

Check D609A, D613, D614, D615, D619A, D620A, D621A, Q601, Q602, IC602 and their periphery circuit. Repair it if defective.

FLOW CHART NO.4 When buzz sound can be heard in the periphery of power circuit.

Check if there is any short-circuit on the rectifying diode and the circuit in each rectifying circuit of the secondary side. Repair it if defective. (D650, D653, D655, Q703, Q705)

8-1

PL14.24ATR

FLOW CHART NO.5 P-ON+21V is not output.

Is approximately +21V voltage supplied to the cathode of D650?

Check C651, C652, D650 and their periphery circuit. Repair it if defective.

Check C654, C655, D653, D654, D655 and their periphery circuit. Repair it if defective.

Check C654, C655, D653, D654, D655, R756 and their periphery circuit. Repair it if defective.

Yes

Check if there is any leak or short-circuit on the load circuit. Repair it if defective.

FLOW CHART NO.6 AMP+13V is not output.

Is approximately +13V voltage supplied to the cathode of D653(D655)? Yes

Check if there is any leak or short-circuit on the load circuit. Repair it if defective.

FLOW CHART NO.7 AL+3.3V is not output.

Is approximately +13V voltage supplied to the emitter of Q705? Yes

Is approximately +12V voltage supplied to the base of Q705?

Check Q703, D715 and their periphery circuit. Repair it if defective.

Yes Replace Q705.

8-2

PL14.24ATR

[Video Signal Section] FLOW CHART NO.1 The key operation is not functioning.

When pressing each buttons, does the Pin(2) voltage of CN4001 decrease?

Replace the Function CBA Unit.

Yes Replace the Digital Main CBA Unit.

FLOW CHART NO.2 No operation is possible from the remote control unit. (Operation is possible from the unit.)

Is approximately +3.3V voltage supplied to Pin(1) of CN4052? Yes Is the "L" pulse supplied to Pin(5) of CN4052 when the infrared remote control activated?

Check AL+3.3V line and repair it if defective.

Replace the IR Sensor CBA Unit.

Yes Replace the Digital Main CBA Unit.

FLOW CHART NO.3 Picture does not appear normally.

Is approximately +21V voltage supplied to Pin(20, 21, 22, 23) of CN501? Yes Is approximately +3.3V voltage supplied to Pin(8) of CN501? Yes

See FLOW CHART NO.5 <P-ON+21V is not output. [Power Supply Section]>

See FLOW CHART NO.7 <AL+3.3V is not output. [Power Supply Section]>

Digital Main CBA Unit or LCD Panel Assembly may be defective. Check and replace these parts.

8-3

PL14.24ATR

[Audio Signal Section] FLOW CHART NO.1 Audio is not output normally.

Is approximately +13V voltage supplied to Pin(15, 16, 17, 18) of CN501? Yes Is approximately +3.3V voltage supplied to Pin(8) of CN501? Yes Are the audio signals output to Pin(1, 2, 3, 4) of CN3801?

See FLOW CHART NO.6 <AMP+13V is not output. [Power Supply Section]>

See FLOW CHART NO.7 <AL+3.3V is not output. [Power Supply Section]>

Replace the Digital Main CBA Unit.

Yes

SP3801, SP3802 or CL3801 may be defective. Check and replace these parts.

8-4

PL14.24ATR

CN3704 USB0(+) USB0(-)

TO VIDEO/AUDIO BLOCK DIAGRAM

9-1

X3101 25MHz OSC

SCL 4 SDA 3

TU3001 (TUNER UNIT)

VGA-SCL VGA-SDA LCD-P-ON COMP-DET HP-DET

USB1(+) WIRELESS USB1(-) LAN MODULE

CN3701

USB JACK

ETHERNET JACK

CN3706 TX(+) TX(-) RX(+) RX(-) TX(+) TX(-) RX(+) RX(-)

P-ON-H2 Y2 STB-RESET AD5

DIGITAL MAIN CBA UNIT

AE4 AXI AD4 AXO

U3 V3 U1 T3

STM-SCL AC2 STM-SDA AC1

REMOTE LED1 KEY-IN1 LIGHT-SENS

PROTECT3 T2 BACKLIGHT-SW W3 BACKLIGHT-ADJ P7

VGA-SCL VGA-SDA LCD-P-ON COMP-DET HP-DET

Y15 TU-SCL AA16 TU-SDA

Y7 AD3 W2 H6 L2

L23 USB1(+) M22 USB1(-)

M24 USB0(+) N22 USB0(-)

AD6 AE6 AC7 AC8

IC3101 (MAIN MICRO CONTROLLER)

CN3105 5 6 4 7

6 SCL 5 SDA

RESET IC3601

IC3103 (MEMORY)

BUFFER Q3102

LED DRIVE

Q3101

REMOTE LED1 KEY-IN1 LIGHT

LIGHT SENSOR

IC4051

D4051 POWER

CN4051 2 KEY-IN1

P-ON+5V

PROTECT3 BACKLIGHT-SW BACKLIGHT-ADJ

CN501 3 5 7 CN3601 3 PROTECT3 5 BACKLIGHT-SW 7 BACKLIGHT-ADJ

KEY SWITCH

TO LED BACKLIGHT DRIVE BLOCK DIAGRAM

TO POWER SUPPLY BLOCK DIAGRAM

FUNCTION CBA UNIT

CN4001 2

POWER SUPPLY CBA

P-ON-H2 RESET

CN501 6 4

CN3601 6 P-ON-H2 4 RESET

IR SENSOR CBA UNIT

CN4052 5 4 6 3

REMOTE SENSOR

RS4051

1. System Control Block Diagram

BLOCK DIAGRAMS

PL14.24BLS

9-2

SP3802 SPEAKER R-CH

SP3801 SPEAKER L-CH

JK3801 HEADPHONE JACK

DIGITAL AUDIO-OUT (COAXIAL)

AUDIO(R)-IN

AUDIO(L)-IN

COMPONENT -Pr-IN

COMPONENT -Pb-IN

COMPONENT -Y/VIDEO-IN

JK3713 PC-RGB -IN

JK3706

JK3701

SP(L)+ SP(L)SP(R)+ SP(R)-

CN3801 1 2 4 3

Q3709 BUFFER

DRIVE DRIVE

DRIVE

POWER LIMIT

CONTROL LOGIC

PWM LOGIC

IC3803 (AUDIO AMP)

DIF-OUT1 6 DIF-OUT2 7 IF-AGC 5

TU3001 (TUNER UNIT)

DIGITAL MAIN CBA UNIT

1 2

Q3822

Q3821 P-ON+3.3V

VGA-SCL VGA-SDA LCD-P-ON COMP-DET HP-DET

AMP(R)-OUT

AMP(L)-OUT

HP(R) HP(L)

SPDIF

AUDIO(L)-IN AUDIO(R)-IN

COM-VIDEO-Y/VIDEO-IN COM-VIDEO-Pb-IN COM-VIDEO-Pr-IN

DIF-OUT1 DIF-OUT2 IF-AGC

VGA-R-IN VGA-G-IN VGA-B-IN VGA-HSYNC VGA-VSYNC

AUDIO SIGNAL

TO SYSTEM CONTROL BLOCK DIAGRAM

TO DIGITAL SIGNAL PROCESS BLOCK DIAGRAM

VIDEO SIGNAL

2. Video/Audio Block Diagram

PL14.24BLVA

F5 ARC-OUT AC23 AE22 AD23 AE23 AD24 AE24 AD22 AC22 W6 T7

W23 W22 V23 V22 U23 V24 Y25 Y24 AA5 V7

AB24 AC25 AA23 AB25 Y23 AA24 AC24 AD25 AE3 R9

JK3715 DATA0(+) 7 DATA0(-) 9 DATA1(+) 4 DATA1(-) 6 DATA2(+) 1 HDMI-IN2 DATA2(-) 3 CLOCK(+) 10 CLOCK(-) 12 HDMI-DATA 16 HDMI-CLOCK 15

JK3716 DATA0(+) 7 DATA0(-) 9 DATA1(+) 4 DATA1(-) 6 DATA2(+) 1 DATA2(-) HDMI-IN3 3 CLOCK(+) 10 CLOCK(-) 12 HDMI-DATA 16 HDMI-CLOCK 15

AMP(L)-OUT AMP(R)-OUT AUDIO(L)-IN AUDIO(R)-IN HP(L) HP(R) SPDIF

DIF-OUT1 DIF-OUT2 IF-AGC

JK3717 ARC 14 DATA0(+) 7 DATA0(-) 9 DATA1(+) 4 DATA1(-) 6 DATA2(+) 1 HDMI-IN1 DATA2(-) 3 CLOCK(+) 10 CLOCK(-) 12 HDMI-DATA 16 HDMI-CLOCK 15

TO VIDEO/AUDIO BLOCK DIAGRAM

VGA-HSYNC VGA-VSYNC VGA-R-IN VGA-G-IN VGA-B-IN COM-VIDEO-Y/VIDEO-IN COM-VIDEO-Pb-IN COM-VIDEO-Pr-IN

HDMI SW

AB17 AC18 AE14 AC14 AD17 AC17 F4

9-3 VIDEO DECODER

HDMI I/F

AUDIO DECODER

AUDIO I/F

DEMODULATOR /MPEG DECODER

A/D CONVERTER

IC3101 (DIGITAL SIGNAL PROCESS) Y11 VGA-HSYNC AA12 VGA-VSYNC AD13 AB13 AC13 SW AB10 AC11 AD11 AB11 AD9 AE9 AA13 IF-AGC

DIGITAL SIGNAL PROCESS

LVDS TX

MMCDAT(0-7)

MMA(0-14)

MMDQ(0-31)

L3 L4 K3 K4 J1 J2 H3 H4 J3 H2 M6 M5 N5 M4 L6 L5 K5 J5 M7 L7

DIGITAL MAIN CBA UNIT

DATA(0-7)

CN3906 24 23 22 21 20 19 14 13 17 16 40 39 38 37 36 35 30 29 33 32

AUDIO SIGNAL

IC3102 (NAND FLASH MEMORY)

ADDESS(0-14)

DATA(16-31)

IC3402 (DDR3 SDRAM)

ADDESS(0-14)

DATA(0-15)

IC3401 (DDR3 SDRAM)

VIDEO SIGNAL

LVDS-OD0(-) LVDS-OD0(+) LVDS-OD1(-) LVDS-OD1(+) LVDS-OD2(-) LVDS-OD2(+) LVDS-OD3(-) LVDS-OD3(+) LVDS-OCLK(-) LVDS-OCLK(+) LVDS-ED0(-) LVDS-ED0(+) LVDS-ED1(-) LVDS-ED1(+) LVDS-ED2(-) LVDS-ED2(+) LVDS-ED3(-) LVDS-ED3(+) LVDS-ECLK(-) LVDS-ECLK(+)

LCD PANEL ASSEMBLY

3. Digital Signal Process Block Diagram

PL14.24BLD

TO SYSTEM CONTROL BLOCK DIAGRAM

VIN

PROTECT3 BACKLIGHT-SW BACKLIGHT-ADJ

9-4 2 6

2 6

LOGIC

POWER SUPPLY CBA

LDO

LOGIC

FAIL DETECT

IC1301 (LED BACKLIGHT DRIVER)

LDO

LOGIC

FAIL DETECT

IC1201 (LED BACKLIGHT DRIVER)

LDO

FAIL DETECT

IC1101 (LED BACKLIGHT DRIVER)

DRIVE

ISW 15

3 14

OVP

ISW 15

DRIVE

OVP

DRIVE ISW 15

OVP

Q1301

Q1201

Q1101

Q1303

Q1203

Q1103

CN1301 1 VLED3 2 ILED3

CN1101 3 VLED2 4 ILED2

CN1101 1 VLED1 2 ILED1

LCD PANEL ASSEMBLY

4. LED Backlight Drive Block Diagram

PL14.24BLBD

AC601 AC CORD

2.5A 250V

F602 2.5A/250V

VCC 12

9-5

Q1607

Q1701

Q1702 SW+15V

Q1604

SWITCHING CONTROL

IC1601 (SWITCHING CONTROL)

CN601 B W

FB 2

ZCD 1

VCC 6

OUT 5

IS 3

IC1701 SWITCHING CONTROL

Q1601 SWITCHING 4

T1601

T1602

HOT

BRIDGE RECTIFIER

D601-D604

Q1704 SWITCHING

LINE FILTER

Q1602 SWITCHING

L601

L602

HOT CIRCUIT. BE CAREFUL.

CAUTION ! Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. If Main Fuse (F602) is blown , check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the power supply circuit to fail.

Q602 SWITCHING

COLD

1 3

IC1602 (ISOLATOR)

IC1702 ERROR VOLTAGE DET

T1701

FB 2

ZCD 1

VCC 6

OUT 5

IS 3

IC601 SWITCHING CONTROL

Q601 SWITCHING

2.5A 250V

Q691

IC602 ERROR VOLTAGE DET

T601

10 9

12 11

Q653

Q701

Q702

Q654 RESET

Q650 RESET

TO SYSTEM CONTROL BLOCK DIAGRAM

AMP+13V VIN

P-ON+21V AMP+13V AL+3.3V

POWER SUPPLY CBA

RESET P-ON-H2

CN501 CN3601 20-23 P-ON+21V 20-23 15-18 AMP+13V 15-18 8 AL+3.3V 8

DIGITAL MAIN CBA UNIT

NOTE: The voltage for parts in hot circuit is measured using hot GND as a common terminal.

Q703,Q705 +3.3V REG.

CAUTION ! : For continued protection against risk of fire, replace only with same type 2.5A, 250V fuse. ATTENTION : Utiliser un fusible de rechange de mÃªme type de 2.5A, 250V.

5. Power Supply Block Diagram

PL14.24BLP

SCHEMATIC DIAGRAMS / CBA AND TEST POINTS Standard Notes WARNING Many electrical and mechanical parts in this chassis have special characteristics. These characteristics often pass unnoticed and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc. Replacement parts that have these special safety characteristics are identified in this manual and its supplements; electrical components having such features are identified by the mark “#” in the schematic diagram and the parts list. Before replacing any of these components, read the parts list in this manual carefully. The use of substitute replacement parts that do not have the same safety characteristics as specified in the parts list may create shock, fire, or other hazards.

Notes: 1. Do not use the part number shown on these drawings for ordering. The correct part number is shown in the parts list, and may be slightly different or amended since these drawings were prepared. 2. All resistance values are indicated in ohms (K = 103, M = 106). 3. Resistor wattages are 1/4W or 1/6W unless otherwise specified. 4. All capacitance values are indicated in µF (P = 10-6 µF). 5. All voltages are DC voltages unless otherwise specified. 6. This schematic diagrams are masterized version that should cover the entire PL14.24 chassis models. Thus some parts in detail illustrated on this schematic diagrams may vary depend on the model within the PL14.24 chassis. Please refer to the parts lists for each models. 7. The Circuit Board layout illustrated on this service manual is the latest version for this chassis at the moment of making this service manual. Depend on the mass production date of each model, the actual layout of each Board may differ slightly from this version.

10-1

FL14.24SC

LIST OF CAUTION, NOTES, AND SYMBOLS USED IN THE SCHEMATIC DIAGRAMS ON THE FOLLOWING PAGES: 1. CAUTION: CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE_A,_V FUSE. ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MĂ&#x160;ME TYPE DE_A,_V.

2. CAUTION: Fixed Voltage (or Auto voltage selectable) power supply circuit is used in this unit. If Main Fuse (F602) is blown, first check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the power supply circuit to fail.

3. Note: 1. Do not use the part number shown on the drawings for ordering. The correct part number is shown in the parts list, and may be slightly different or amended since the drawings were prepared. 2. To maintain original function and reliability of repaired units, use only original replacement parts which are listed with their part numbers in the parts list section of the service manual.

4. Voltage indications on the schematics are as shown below: Plug the TV power cord into a standard AC outlet.:

1 (Unit: Volt)

5.0

Voltage

5.0

Power on mode

Indicates that the voltage is not consistent here.

5. How to read converged lines 1-D3 3

Distinction Area Line Number (1 to 3 digits)

AREA D3

AREA B1

Examples: 1. "1-D3" means that line number "1" goes to the line number "1" of the area "D3". 2. "1-B1" means that line number "1" goes to the line number "1" of the area "B1".

1-B1

1-D3

1 A

6. Test Point Information : Indicates a test point with a jumper wire across a hole in the PCB. : Used to indicate a test point with a component lead on foil side. : Used to indicate a test point with no test pin. : Used to indicate a test point with a test pin.

The reference number of parts on Schematic Diagrams/CBA can be retrieved by application search function.

10-2

FL14.24SC

Power Supply 1 Schematic Diagram CAUTION ! Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. If Main Fuse (F602) is blown , check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the power supply circuit to fail.

2.5A 250V

NOTE: The voltage for parts in hot circuit is measured using hot GND as a common terminal.

CAUTION ! : For continued protection against risk of fire, replace only with same type 2.5A, 250V fuse. ATTENTION : Utiliser un fusible de rechange de mÃªme type de 2.5A, 250V.

HOT CIRCUIT. BE CAREFUL.

HOT D603 1N5406BH

D605 1N4005 D606 1N4005 R624 510K R625 510K R626 510K

BC1601 WIRE BC1602 WIRE

C1612 0.47 /310V

R1624 0.033/5W

R618 0.22 /2W

C606 220P /2KV

Q601 TK4P60DA G (SWITCHING) 2.2 S0 C625 1000P R617 4.7K

T1602 TE2520A7001 1 8 C1626 OPEN

R1617 750K R1618 750K R1619 750K R1620 750K

R1601 750K R1602 750K R1604 750K R1605 750K

R1612 750K R1613 750K R1614 750K R1615 750K

D615 1SS400ST

IC601 FA5640N SWITCHING CONTROL 1.1 1 ZCD VH 8 157.5 1.4 2 FB NU 7

5 R607 4.7K

C616 220 /35V

C610 220P

0.1 3 IS 0 4 GND

C607 1000P

R603 C608 OPEN 150P

VCC 6 17.2 OUT 5 2.7

R613 OPEN

D614 TFZVTR27B

D1610 C1606 OPEN 1000P C1604 2.2 R1607 C1605 1200P 220 R1608 51K

D1705A CES520

ZCDA 16 1.4 VREF 15 6.0

R1654 R1626 C1609 22P OPEN 47 GDA 14 6.5 C1603 0.22 GND 13 0 VCC 12 15.4 GDB 11 6.5 R1622 18K CS 10 0

1.7 7 VINAC 3.6 8 HVSEN PWMCNTL 9 0

R1703 4.7K T1601 TE2520A7001 1 8

C1601 R1653 8200P 68

Q1601 TK7P60W R1625 (SWITCHING) 47 150.3 D G 6.5

R1629 OPEN

D619A RS1GJTD

R634 270 C611 0.1

C621 1.9 4700P IC604 2.5 SL431A-AT C622 0 SHUNT 1000P REGULATOR

C1611 0.1

C1602 4.7 /50V

0 S

C1703 220P

0.1 3 IS 0 4 GND

C1701 1000P

R1701 OPEN

C1702 150P

R619 4.7

R632 1.2K

R1712 180

R1707 820K

D623 MM5Z5V6B R620 47K 0 C624 0.1 R629 47K

D1608 TFZVTR16B

R1746 270K

D1710 OPEN

D656A RS1GJTD

D1707A OPEN

R1702 2.7K

D654A OPEN C655 470/16V

C654 470/16V R654 180

R655 180

20.1

R657 3.9K

R659 27K R660 3.9K

C660 R658 0.1 2.7K 2.5 0 D660 SL431A-AT

T1701 POWER TRANS

7 C1726 1500P /2KV 6 D1714A RS1KJTD 5

D661 1SS400ST

10 D710 SB3200BR

D711 SB3200BR

R701 10K

C639 OPEN

Q653 KTC3875S -Y-RTK/P (SWITCHING) 0

R748 3.3K R753 100

0.7

D713A OPEN

C723 470/63V

C728 100/10V

R754 10K

R668 47K R669 10K

D713 OPEN

TO DIGITAL MAIN CBA UNIT CN3601 NU PROTECT1(NU) PROTECT3 RESET BACKLIGHT-SW P-ON-H2 BACKLIGHT-ADJ AL+3.3V GND GND GND GND GND GND AMP+13V AMP+13V AMP+13V AMP+13V GND P-ON+21V P-ON+21V P-ON+21V P-ON+21V

D716 TFZVTR4.7B

3.9

2.5 0 D715 SL431A-AT

C638 OPEN

R702 47K

CONTINUE POWER SUPPLY 2 VIN

C725 2200P/1KV

IC1702 TLP785F ERROR VOLTAGE DET 2.0

26.3

R738 330

C724 470/63V

C726 470/63V

C1004 1/100V

R741 3.9K D1711 TFZVTR27B

25.3

C722 0.1 R739 15K R743 51K R744 9.1K

R740 2.7K

25.3

Q1701 KTC3875S 0 -Y-RTK/P (SWITCHING)

2.5 0 D704 SL431A-AT

IC1602 TLP785F (ISOLATOR) 0.1

R745 3.3K R692 330

1.8 C691 0.01

D662 1SS400ST

0.7

C1707 1000P/250V C1711 OPEN

10-3

Q701 KTC3875S -Y-RTK/P (SWITCHING) 0.6 C701 OPEN

Q705 2SA1201-Y (+3.3V REG.) 12.9 3.3 12.3 R752 OPEN 12.3 3.3 Q703 KTC3875S R749 R750 R751 3.9 -Y-RTK/P 270 270 270 (SWITCHING) C729 R755 0 0.1

D712 SB3200BR 3

R667 8.2K

R661 3.3K

C637 OPEN

R756 1.5

R675 68K R674 0

20.1

C721 0.1

D654 1ZB20BB

R1710 22K

R1639 10K R1638 18K

R663 OPEN

C657 OPEN

21.1

0 Q1607 2SA1576UBTLQ R1637 (SWITCHING) 180 18.6 18.7 C1618 10/50V 18.0

0 0.7 R662 47K 0

D655 SB3150BH

D1704 C1704 OPEN 0.1

R1656 4.7

3.3 Q650 R703 KTC3875S 10K -Y-RTK/P 0 (RESET) Q702 KTC3875S 0 -Y-RTK/P (SWITCHING) Q654 KTC3875S 0 R704 -Y-RTK/P 0 47K (RESET) 0

CN501 1 2 3.3 3 3.3 4 3.3 5 3.1 6 3.3 7 3.3 8 0 9 0 10 0 11 0 12 0 13 0 14 12.9 15 12.9 16 12.9 17 12.9 18 0 19 21.2 20 21.2 21 21.2 22 21.2 23

D1707 1ZB36BB

Q1702 2SA1576UBTLQ (SW+15V) 15.5 15.4 R1711 14.8 10K

0.7 R1708 C1709 220/10V 22K

D652A OPEN

D653 SB3150BH

1.4 Q603 KTC3875S 0 -Y-RTK/P (SWITCHING)

R1719 0.12/2W

D657 MM5Z4V3B C656 R656 R652 1/50V 8.2K 10K

R651 1 D658 OPEN

IC602 TLP785F ERROR VOLTAGE DET

R1747 270K

D652 OPEN

R653 22K

D621A RS1GJTD C615 47/50V

D1714 OPEN Q1704 BC1703 269.6 TK5A65D BEAD (SWITCHING) D G C1706 4.6 C1710 470P 1000P R1718 S0.1 /2KV 22K

VCC 6 14.4 OUT 5 5.0

R1709 OPEN

Q1604 2SC5344SY (SWITCHING) 15.4 18.6 16.1 R1633 2.7K R1634 47 R1657 2.7K

C1610 22P

C1708 33/400V

C620 33/35V

R1705 27K

C1614 220P /2KV

R1627 12K R1655 OPEN

D620A RS1GJTD

R1720 270

R1616 47K C1608 R1621 1000P 1.8K

10 D656 OPEN

R628 22K

IC1701 FA5640N SWITCHING CONTROL 1.0 1 ZCD VH 8 14.4 2.0 2 FB NU 7

R1704 22K

R1611 100

6.0 4 PHB 1.4 5 COMP 0 6 GND

R1609 5.6K

D619 OPEN

R1606 120K

1.4 1 ZCDB 6.0 2 VSENSE 3.1 3 TSET

C652 470/25V

C651 470/25V

D664 OPEN

D620 OPEN

Q602 TK3P50D (SWITCHING) S D 18.1 36.9 17.7 G R635 R633 1.2K 1.2K D618 TFZVTR18B

C612 1000P

R1714 22

C1621 100 /400V

D1605 30PFB60

C650 2200P/1KV

C665 680P /2KV

D664A RS1KJTD

IC1601 UCC28063DR (SWITCHING CONTROL)

R630 R631 560K 560K

D650 SB3200BR

D621 OPEN

D617 0

D1603 30PFB60 R1645 C1607 68K 1200P R1610 18K

1.4

R604 2.7K

150.2 D

R627 36K R623 1.8K

R606 22K

R609 820K

R1623 12K 4

D611 OPEN

R608 R605 22 270 D609A CES520

D613A D613 OPEN 1ZB36BB

C1613 220P /2KV Q1602 TK7P60W (SWITCHING) G 6.5 R1630 OPEN

BC602 BEAD

379.2 D

R610 15K R611 15K R614 15K

T601 POWER TRANS

C605 33/400V

C1615 OPEN

CONTINUE POWER SUPPLY 2 BACKLIGHT-SW BACKLIGHT-ADJ PROTECT3 AMP+13V

C619 1000P/250V

2.5A250V

C602 0.1 /310V

POWER SUPPLY CBA

D602 1N5406BH

F602 2.5A/250V

COLD

D607 1N5406BH

D604 1N5406BH

D601 1N5406BH

C614 1 /310V

R601 1.2M /1/2W

SA601 VARISTOR

C604 0.1 /310V

L601 LINE FILTER

CN601 W B

L602 LINE FILTER AC601 AC CORD

0.7 Q691 1.4 KTC3875S -Y-RTK/P (SWITCHING) 0.7

R691 2.2K C692 33/35V

R693 47K

D663 1SS400ST

G PL14.24SCP1

Power Supply 2 Schematic Diagram

TO LCD PANEL CN1301 ASSEMBLY 70.9 1 VLED3 0.7 2 ILED3 C1303 C1302 100/63V 1/100V

D1304 TFZVTR27B R1322 D1305 OPEN TFZVTR27B

C1314 1/100V

R1326 240K

R1324 5.6K

R1327 20K

D1303 1SS400ST R1301 75K

C1320 OPEN

R1303 20K

R1311 24K R1312 2.2K

C1316 1/100V

C1317 100/100V

IC1301 HA7223PE LED BACKLIGHT DRIVER

5.0 1 C1305 1 3.0 2 2.3 3 R1310 36K 5.6 4 C1306 C1304 0.22 OPEN 0.3 5

OVP

R1308 10K

D1302 OPEN R1313 10

LOGIC

DRIVE

ULVS

GND 12 0 11 0.7

FAIL DETECT LOGIC

10 1.3 9 1.2

DRIVE OSC

D1104 TFZVTR27B R1122 D1105 OPEN TFZVTR27B

R1328 1K G 11.4

D 0.7 S 0.7

Q1303 AP18T10AGH-HF (SWITCHING)

C1102 1/100V C1114 1/100V

R1123 5.6K

R1126 240K

R1124 5.6K

R1127 20K

R1102 20K

R1103 20K

R1110 36K C1106 C1104 0.22 OPEN

R1321 51 R1320 C1310 120 0.22 C1311 OPEN R1305 75 R1304 75

R1307 100K

R1329 0.62 R1330 0.56 R1331 0.56 R1332 0

C1313 2200P

C1312 D1306 OPEN 1

R1109 100K

C1120 OPEN

R1111 24K R1112 2.2K

C1116 1/100V

C1115 OPEN

D1101 SB2150BD D1101A OPEN

C1117 100/100V

IC1101 HA7223PE LED BACKLIGHT DRIVER C1105 1

R1101 75K

L1101 100uH

C1101 1/100V

R1125 360K

D1103 1SS400ST

R1319 62K

R1333 OPEN

L1302 BEAD Q1301 41.6 D AP05N20GH-HF G (SWITCHING) 3.6 C1308 0 S 560P R1318 200 R1316 C1309 R1315 1000P 0.12/1W OPEN R1317 OPEN

14 3.5 13 11.4

C1307 0.047 R1306 10K

C1103 100/63V

VCC 16 11.4 ISW 15 0

LDO

3.0 6 0.2 7 NU 2.1 8 NU

R1309 100K

C1315 OPEN

D1301 SB2150BD D1301A OPEN

R1325 360K

R1323 5.6K

R1302 20K

L1301 100uH

C1301 1/100V

5.0 1 3.0 2 2.3 3 5.6 4

DRIVE

LOGIC

14 3.5 13 11.4

GND 12 0 11 0.7

FAIL DETECT

0.2 7 NU 2.1 8 NU

R1133 OPEN

LOGIC

ULVS

0.3 5 3.0 6

DRIVE OSC

10 1.3 9 1.2

C1107 0.047 R1108 10K

R1128 1K

R1113 10

GP003 OPEN

D 0.7 G 11.4

GP002 OPEN

Q1103 AP18T10AGH-HF S 0.7 (SWITCHING)

CN1101 70.9 1 0.7 2 70.9 3 0.7 4

TO LCD PANEL ASSEMBLY VLED1 ILED1 VLED2 ILED2

R1121 51 R1120 C1110 120 0.22 C1111 OPEN R1119 62K

R1106 10K

JS1135 OPEN

D1102 OPEN

VCC 16 11.4 ISW 15 0

LDO OVP

GP001 OPEN L1102 BEAD Q1101 41.6 D AP05N20GH-HF G (SWITCHING) 3.6 0 S C1108 560P R1118 200 R1116 C1109 R1115 1000P 0.12/1W OPEN R1117 OPEN

C1113 2200P

R1105 75 R1104 75

R1107 100K

C1112 D1106 OPEN 1

R1129 0.62 R1130 0.56 R1131 0.56 R1132 0 CONTINUE POWER SUPPLY 1 BACKLIGHT-SW BACKLIGHT-ADJ PROTECT3 AMP+13V SPWM1 SPWM2 CONTINUE POWER SUPPLY 1 VIN

C1402 OPEN

C1403 OPEN

D1403 OPEN

C1414 OPEN

D1404 OPEN R1422 D1405 OPEN OPEN

R1425 OPEN

R1423 OPEN

R1426 OPEN

R1424 OPEN

R1427 OPEN

L1401 OPEN

C1401 OPEN C1415 OPEN

C1416 OPEN

R1401 OPEN R1402 OPEN

R1403 OPEN

C1404 OPEN

3 4

LOGIC

DRIVE

R1415 OPEN

R1416 OPEN R1417 OPEN

R1224 5.6K

R1227 20K

R1428 OPEN G

LOGIC

DRIVE OSC

11 10 9

C1407 OPEN

R1201 75K

Q1403 OPEN

R1202 20K

C1205 1

R1203 20K

C1204 OPEN

R1210 36K C1206 0.22

R1421 OPEN R1420 C1410 OPEN OPEN C1411 OPEN R1419 OPEN

R1407 OPEN

C1413 OPEN

R1405 OPEN R1404 OPEN

C1412 D1406 OPEN OPEN

R1429 OPEN R1430 OPEN R1431 OPEN R1432 OPEN

5.0 1 3.0 2

C1216 1/100V

C1217 100/100V

2.3 3 5.6 4 0.3 5

OVP

R1211 24K R1212 2.2K R1208 10K

JS1235 OPEN

LOGIC

DRIVE

ULVS

C1207 0.047

FAIL DETECT LOGIC

14 3.5 13 11.4

GND 12 0 11 0.7

DRIVE OSC

10 1.3 9 1.2

R1228 1K

R1207 100K

R1213 10

D 0.7 G 11.4

C1213 2200P

R1205 75 R1204 75

Q1203 AP18T10AGH-HF S 0.7 (SWITCHING)

C1212 D1206 1 OPEN

R1229 0.62 R1230 0.56 R1231 0.56 R1232 0

CN1401 (NO CONNECTION) 1 VLED4 2 ILED4

POWER SUPPLY CBA

D1202 OPEN

R1221 51 R1220 C1210 120 0.22 C1211 OPEN R1219 62K

R1206 10K

L1202 BEAD Q1201 41.6 D AP05N20GH-HF G (SWITCHING) 3.6 0 S C1208 560P R1218 200 R1216 C1209 R1215 OPEN 1000P 0.12/1W R1217 OPEN

VCC 16 11.4 ISW 15 0

LDO

3.0 6 0.2 7 NU 2.1 8 NU

R1209 100K

C1220 OPEN

C1215 OPEN

D1201 SB2150BD D1201A OPEN

IC1201 HA7223PE LED BACKLIGHT DRIVER

R1233 OPEN

GND 12 FAIL DETECT

7 NU

R1408 OPEN

R1226 240K

L1201 100uH

C1201 1/100V

R1225 360K

R1223 5.6K

ULVS

8 NU

C1214 1/100V

C1408 OPEN

ISW 15 OVP

R1406 OPEN

C1202 1/100V

VCC 16

R1410 OPEN C1406 OPEN

JS1435 OPEN

R1413 OPEN

D1204 TFZVTR27B R1222 D1205 OPEN TFZVTR27B

LDO

C1405 OPEN

R1409 OPEN

C1420 OPEN

D1402 OPEN

C1409 OPEN

IC1401 OPEN

R1411 OPEN R1412 OPEN

L1402 OPEN Q1401 D OPEN G R1418 OPEN

1 R1433 OPEN

C1417 OPEN

C1203 100/63V

D1203 1SS400ST

D1401 OPEN D1401A OPEN

K 10-4

M PL14.24SCP2

Digital Main 1 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3101. IC3101 is divided into seven and shown as IC3101 (1/7) ~ IC3101 (7/7) in this Digital Main Schematic Diagram Section.

R3908 OPEN

R3932 OPEN

R3907 OPEN

R3934 OPEN R3931 OPEN R3935 OPEN R3924 OPEN

R3933 OPEN

C3947 OPEN

C3948 OPEN

Q3901 OPEN

*1 IC3101(1/7) MN2WS0270HA DIGITAL SIGNAL PROCESS /MAIN MICRO CONTROLLER

J1 J2 J3 H2

R3974 R3975 R3976 R3977 R3978 R3979

OPEN

R3915

OPEN

OPEN OPEN OPEN OPEN OPEN OPEN

TO DIGITAL MAIN 6 IC3101(5/7)

NU TP POL CPV OE OE2 STV

R3914

R3916 10K

C3942 C3998 C3941 C3940 C3939 C3938

K7 NU J7 NU

H3 H4 G3 F3 F1 F2 P1 R6 R3 P3 N3 R5 P4

OPEN

OPEN OPEN OPEN OPEN OPEN OPEN

LVDS TX

R3913

R3884 R3928 R3883 R3882 R3881 R3880

J6 K6 J5 K5 L7 M7 L5 L6 M4 N5 M5 M6

L3 L4 K3 K4

10P 10P 10P 10P 10P 10P 10P 10P 10P 10P OPEN OPEN

(NO CONNECTION) CN3901 LCD+12V 30 LCD+12V 29 LCD+12V 28 LCD+12V 27 GND 26 GND 25 GND 24 PANEL-WP 23 LVDS-SEL 22 NU 21 GND 20 LVDS-OD0(-) 19 LVDS-OD0(+) 18 GND 17 LVDS-OD1(-) 16 LVDS-OD1(+) 15 GND 14 LVDS-OD2(-) 13 LVDS-OD2(+) 12 GND 11 LVDS-OCLK(-) 10 LVDS-OCLK(+) 9 GND 8 LVDS-OD3(-) 7 LVDS-OD3(+) 6 GND 5 NU 4 PANEL-SCL 3 PANEL-SDA 2 GND 1

R3909 OPEN R3910 OPEN

C3928 C3917 C3918 C3919 C3922 C3923 C3920 C3921 C3924 C3925 C3926 C3927

CONTINUE DIGITAL 7 P-ON+21V P-ON+3.3V

10P 10P 10P 10P 10P 10P 10P 10P 10P 10P OPEN OPEN

CONTINUE DIGITAL 2 LCD+12V/+21V

C3916 C3903 C3904 C3905 C3908 C3911 C3906 C3907 C3912 C3913 C3914 C3915

(NO CONNECTION) CN3905 LCD+12V 1 LCD+12V 2 LCD+12V 3 LCD+12V 4 GND 5 GND 6 GND 7 PANEL-WP 8 LVDS-SEL 9 NU 10 GND 11 LVDS-OD0(-) 12 LVDS-OD0(+) 13 GND 14 LVDS-OD1(-) 15 LVDS-OD1(+) 16 GND 17 LVDS-OD2(-) 18 LVDS-OD2(+) 19 GND 20 LVDS-OCLK(-) 21 LVDS-OCLK(+) 22 GND 23 LVDS-OD3(-) 24 LVDS-OD3(+) 25 GND 26 BIST 27 PANEL-SCL 28 PANEL-SDA 29 GND 30 CONTINUE DIGITAL 2 LVDS-OD4(+) LVDS-OD4(-) LVDS-OD3(+) LVDS-OD3(-) LVDS-OCLK(+) LVDS-OCLK(-) LVDS-OD2(+) LVDS-OD2(-) LVDS-OD1(+) LVDS-OD1(-) LVDS-OD0(+) LVDS-OD0(-) LVDS-ED4(+) LVDS-ED4(-) LVDS-ED3(+) LVDS-ED3(-) LVDS-ECLK(+) LVDS-ECLK(-) LVDS-ED2(+) LVDS-ED2(-) LVDS-ED1(+) LVDS-ED1(-) LVDS-ED0(+) LVDS-ED0(-)

(NO CONNECTION) LCD+21V LCD+21V GND VCOM PWR-CTRL P-ON+3.3V GND LVDS-OD0(-) LVDS-OD0(+) LVDS-OD1(-) LVDS-OD1(+) LVDS-OD2(-) LVDS-OD2(+) GND LVDS-OCLK(-) LVDS-OCLK(+) GND LVDS-OD3(-) LVDS-OD3(+) LVDS-OD4(-) LVDS-OD4(+) LVDS-OD5(-) LVDS-OD5(+) GND TP POL CPV OE1 OE2 STV

CN3903 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

(NO CONNECTION) LCD+21V LCD+21V LCD+21V GND VCOM PWR-CTRL P-ON+3.3V GND LVDS-OD0(-) LVDS-OD0(+) LVDS-OD1(-) LVDS-OD1(+) LVDS-OD2(-) LVDS-OD2(+) GND LVDS-OCLK(-) LVDS-OCLK(+) GND LVDS-OD3(-) LVDS-OD3(+) LVDS-OD4(-) LVDS-OD4(+) LVDS-OD5(-) LVDS-OD5(+) GND TP POL CPV OE OE2 STV

CONTINUE DIGITAL 4 VCOM-PWM

N2 NU P2 NU P7 BACKLIGHT-ADJ

CONTINUE DIGITAL 2 VCOM-DC VCOM-PWM LCD-P-ON PANEL-WP PANEL-SCL PANEL-SDA

R3901 10K

R3906 OPEN R3904 OPEN

CONTINUE DIGITAL 7 BACKLIGHT-ADJ

R3925 OPEN

DIGITAL MAIN CBA UNIT

CN3904 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

D 10-5

CN3907 1 2 3 4

(NO CONNECTION) GND PANEL-WP PANEL-SCL PANEL-SDA

F PL14.24SCD1

Digital Main 2 Schematic Diagram

CONTINUE DIGITAL 7 P-ON+21V P-ON+3.3V

R3942 OPEN

CONTINUE DIGITAL 1 LCD+12V/+21V

R3952 OPEN

D3905 OPEN

C3946 0.047

C3996 OPEN

D3906 OPEN

TO LCD PANEL ASSEMBLY LCD+12V LCD+12V LCD+12V LCD+12V NU GND GND GND GND GND LVDS-OD4(+) LVDS-OD4(-) LVDS-OD3(+) LVDS-OD3(-) GND LVDS-OCLK(+) LVDS-OCLK(-) GND LVDS-OD2(+) LVDS-OD2(-) LVDS-OD1(+) LVDS-OD1(-) LVDS-OD0(+) LVDS-OD0(-) GND GND LVDS-ED4(+) LVDS-ED4(-) LVDS-ED3(+) LVDS-ED3(-) GND LVDS-ECLK(+) LVDS-ECLK(-) GND LVDS-ED2(+) LVDS-ED2(-) LVDS-ED1(+) LVDS-ED1(-) LVDS-ED0(+) LVDS-ED0(-) GND NU NU NU VCOM LCD-P-ON /SCL /SDA PANEL-SDA PANEL-SCL PANEL-WP

CN3906 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

C3951 OPEN

R3990 0 C3992 1000P

R3550 6.8K

C3991 4.7

IC3901 MP1472GJC452Z (+12V REG.) 1 SS

BST 8

2 EN

IN 7

3 COMP

SW 6

4 FB

R3912 OPEN

C3950 1500P C3955 R3937 100P R3936 3.3K 24K

R3938 33K R3939 6.8K

R3911 OPEN

C3952 D3901 OPEN OPEN

C3959 OPEN

C3958 4.7

R3899 OPEN C3949 0.1 C3945 0.1

R3897 OPEN C3944 OPEN

C3943 4.7

Q3905 OPEN 1

R3891 OPEN R3895 OPEN

GND 5

R3898 OPEN

C3997 OPEN

Q3904 OPEN

L3901 22uH C3954 4.7

C3956 4.7

CONTINUE DIGITAL 6 P-ON-H2

C3953 4.7

R3989 OPEN R3988 OPEN R3981 R3980 R3943 R3921

OPEN OPEN 0 0

R3920

R3919

CONTINUE DIGITAL 1 LVDS-OD4(+) LVDS-OD4(-) LVDS-OD3(+) LVDS-OD3(-) LVDS-OCLK(+) LVDS-OCLK(-) LVDS-OD2(+) LVDS-OD2(-) LVDS-OD1(+) LVDS-OD1(-) LVDS-OD0(+) LVDS-OD0(-) LVDS-ED4(+) LVDS-ED4(-) LVDS-ED3(+) LVDS-ED3(-) LVDS-ECLK(+) LVDS-ECLK(-) LVDS-ED2(+) LVDS-ED2(-) LVDS-ED1(+) LVDS-ED1(-) LVDS-ED0(+) LVDS-ED0(-)

R3987 OPEN R3986 OPEN R3985 OPEN R3984 OPEN

R3866 OPEN R3867 OPEN R3922 OPEN

R3982 OPEN

R3869 R3926 R3923 R3902

OPEN OPEN OPEN OPEN

R3948 R3947 R3983 R3918 R3917

OPEN OPEN OPEN

C3902 R3896 OPEN OPEN R3941 OPEN

CONTINUE DIGITAL 1 VCOM-DC VCOM-PWM LCD-P-ON PANEL-WP PANEL-SCL PANEL-SDA

R3900 OPEN R3903 OPEN R3905 OPEN

R3940 OPEN

C3909 OPEN

C3910 OPEN

D3902 1SS400 C3901 4.7

CONTINUE DIGITAL 8 PROTECT3

0 0

DIGITAL MAIN CBA UNIT

J 10-6

L PL14.24SCD2

Digital Main 3 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3101. IC3101 is divided into seven and shown as IC3101 (1/7) ~ IC3101 (7/7) in this Digital Main Schematic Diagram Section. *1 IC3101(2/7) MN2WS0270HA MAIN MICRO CONTROLLER /DIGITAL SIGNAL PROCESS

DIGITAL MAIN CBA UNIT

MMDQ0 MMDQ1 MMDQ2 MMDQ3 MMDQ4 MMDQ5 MMDQ6 MMDQ7 MMDQ8 MMDQ9 MMDQ10 MMDQ11 MMDQ12 MMDQ13 MMDQ14 MMDQ15 MMDQ16 MMDQ17 MMDQ18 MMDQ19 MMDQ20 MMDQ21 MMDQ22 MMDQ23 MMDQ24 MMDQ25 MMDQ26 MMDQ27 MMDQ28 MMDQ29 MMDQ30 MMDQ31

D7 E6 B5 C5 C3 B1 C2 C1 C8 D8 C7 B7 C4 A3 B3 A2 D19 C18 B18 C17 B14 A14 C13 B13 B17 A17 D15 C15 B12 A12 D11 C11

R3421 270 R3423 270 R3411 270 MMDQ0 MMDQ1 MMDQ2 MMDQ3 MMDQ4 MMDQ5 MMDQ6 MMDQ7 MMDQ8 MMDQ9 MMDQ10 MMDQ11 MMDQ12 MMDQ13 MMDQ14 MMDQ15 MMDQ16 MMDQ17 MMDQ18 MMDQ19 MMDQ20 MMDQ21 MMDQ22 MMDQ23 MMDQ24 MMDQ25 MMDQ26 MMDQ27 MMDQ28 MMDQ29 MMDQ30 MMDQ31

C9 B2 C12 C19

MMA2 MMA6 MMA8 MMA14 MMA9 MMA11 MMA13 MMA7 MMA4 MMA5 MMA1 MMA12 MMBA1 MMA10 MMA3 MMA0

G11 E8 G8 E7 E19 F18 E18 E17 D18 F17 F16 E16 D10 E10 D9 G9

MMBA2 MMBA0 MMXWE MMXCAS MMCK MMXCK MMXCS1 MMXCS0 MMODT0 MMODT1 MMCKE0 MMCKE1 MMXRAS MMXRESET DDR3VOUT MMZQ NU NU

G16 E15 D14 E14 B10 B9 D12 E11 F11 F12 F10 G10 F14 F19 D1 D4 G7 G12

MEMORY I/F

TO DIGITAL MAIN 6 IC3101(5/7)

R3405

R3406

56x4

R3407

56x4

R3408

56x4

IC3401 K4B1G1646G-BCK0 (DDR3 SDRAM) MMA14 MMA13 MMA12 MMA11 MMA10 MMA9 MMA8 MMA7 MMA6 MMA5 MMA4 MMA3 MMA2 MMA1 MMA0

MMDQ11 MMDQ14 MMDQ10 MMDQ12 MMDQ8 MMDQ15 MMDQ9 MMDQ13 MMDQ6 MMDQ2 MMDQ7 MMDQ3 MMDQ4 MMDQ1 MMDQ5 MMDQ0

MMDQS1 B4 MMXDQS1 A4 MMDQS0 A6 MMXDQS0 C6 MMDQS3 D17 MMXDQS3 C16 MMDQS2 B15 MMXDQS2 C14 MMDM1 MMDM0 MMDM3 MMDM2

CONTINUE DIGITAL 7 AL+3.3V VCC+1.5V

R3433 10K

0.1 270 0.1 270 0.1 270

T5 D3 D16 D6

C3409 R3422 C3410 R3424 C3406 R3410

DDRPWRON MMVREF0 MMVREF1 MMVREF2

MMA2 MMA6 MMA8 MMA14 MMA9 MMA11 MMA13 MMA7 MMA4 MMA5 MMA1 MMA12

M7 T7 T3 N7 R7 L7 R3 T8 R2 R8 P2 P8 N2 P3 P7 N3

NU A14 A13 A12/BC# A11 A10/AP A9 A8 A7 A6 A5 A4 A3 A2 A1 A0

C7 B7 F3 G3 D3 E7

DQSU DQSU# DQSL DQSL# DMU DML

A3 B8 A2 A7 C2 C8 C3 D7 H7 G2 H8 H3 F8 F2 F7 E3

DQU7 DQU6 DQU5 DQU4 DQU3 DQU2 DQU1 DQU0 DQL7 DQL6 DQL5 DQL4 DQL3 DQL2 DQL1 DQL0

L2 K3 K1 J3 L3 T2 L8

CS# CAS# ODT RAS# WE# RESET# ZQ

IC3402 H5TQ2G63DFR-PBC (DDR3 SDRAM) VDD1 VDD2 VDD3 VDD4 VDD5 VDD6 VDD7 VDD8 VDD9 VDDQ1 VDDQ2 VDDQ3 VDDQ4 VDDQ5 VDDQ6 VDDQ7 VDDQ8 VDDQ9

B2 D9 G7 K2 K8 N1 N9 R1 R9 A1 A8 C1 C9 D2 E9 F1 H2 H9

C3411 10

C3431 10

C3408 1

C3412 0.1

C3413 0.1

C3414 0.1

C3415 0.1

C3416 0.1

C3417 0.1

C3418 0.1

MMA14 MMA13 MMA12 MMA11 MMA10 MMA9 MMA8 MMA7 MMA6 MMA5 MMA4 MMA3 MMA2 MMA1 MMA0

R3425 270 VREFCA M8 R3426 270

C3419 0.1

C3429 0.1

VREFDQ H1

VSS1 VSS2 VSS3 VSS4 VSS5 VSS6 VSS7 VSS8 VSS9 VSS10 VSS11 VSS12 VSSQ1 VSSQ2 VSSQ3 VSSQ4 VSSQ5 VSSQ6 VSSQ7 VSSQ8 VSSQ9

CK J7 CK# K7 CKE K9

R3428 240

NU NU NU NU

M3 BA2 N8 BA1 M2 BA0

MMDQ19 MMDQ22 MMDQ18 MMDQ20 MMDQ16 MMDQ23 MMDQ17 MMDQ21 MMDQ30 MMDQ26 MMDQ31 MMDQ27 MMDQ28 MMDQ25 MMDQ29 MMDQ24

A9 B3 E1 G8 J2 J8 M1 M9 P1 P9 T1 T9 B1 B9 D1 D8 E2 E8 F9 G1 G9

R3403 OPEN R3427 220

R3404 OPEN

C3403 OPEN C3404 OPEN

M7 T7 T3 N7 R7 L7 R3 T8 R2 R8 P2 P8 N2 P3 P7 N3

NU A14 A13 A12/BC# A11 A10/AP A9 A8 A7 A6 A5 A4 A3 A2 A1 A0

C7 B7 F3 G3 D3 E7

DQSU DQSU# DQSL DQSL# DMU DML

A3 B8 A2 A7 C2 C8 C3 D7 H7 G2 H8 H3 F8 F2 F7 E3

DQU7 DQU6 DQU5 DQU4 DQU3 DQU2 DQU1 DQU0 DQL7 DQL6 DQL5 DQL4 DQL3 DQL2 DQL1 DQL0

L2 K3 K1 J3 L3 T2 L8

CS# CAS# ODT RAS# WE# RESET# ZQ

R3432 240

J1 J9 L1 L9

M3 BA2 N8 BA1 M2 BA0

VDD1 VDD2 VDD3 VDD4 VDD5 VDD6 VDD7 VDD8 VDD9 VDDQ1 VDDQ2 VDDQ3 VDDQ4 VDDQ5 VDDQ6 VDDQ7 VDDQ8 VDDQ9

B2 D9 G7 K2 K8 N1 N9 R1 R9 A1 A8 C1 C9 D2 E9 F1 H2 H9

C3420 10

C3432 10

C3421 0.1

C3422 0.1

C3423 0.1

C3425 0.1

C3426 0.1

C3427 0.1

C3424 0.1

R3429 270 VREFCA M8 R3430 270

C3428 0.1

C3430 0.1

VREFDQ H1

VSS1 VSS2 VSS3 VSS4 VSS5 VSS6 VSS7 VSS8 VSS9 VSS10 VSS11 VSS12 VSSQ1 VSSQ2 VSSQ3 VSSQ4 VSSQ5 VSSQ6 VSSQ7 VSSQ8 VSSQ9

A9 B3 E1 G8 J2 J8 M1 M9 P1 P9 T1 T9 B1 B9 D1 D8 E2 E8 F9 G1 G9

CK J7 CK# K7 CKE K9 NU NU NU NU

R3431 220

R3401 OPEN

C3401 OPEN

R3402 OPEN

C3402 OPEN

J1 J9 L1 L9

MMA10 MMA3 MMA0 R3409

R3418 R3417 R3416 R3415 R3414 R3413 R3412

56x4

56 56 56 56 56 56 56

C3405 1 R3420 240

R3419 10K

C3407 OPEN

P 10-7

R PL14.24SCD3

Digital Main 4 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3101. IC3101 is divided into seven and shown as IC3101 (1/7) ~ IC3101 (7/7) in this Digital Main Schematic Diagram Section.

*1 IC3101(3/7) MN2WS0270HA DIGITAL SIGNAL PROCESS /MAIN MICRO CONTROLLER

AE4 AXI

CONTINUE DIGITAL 6 COMP-DET HP-DET R3111 10K

CONTINUE DIGITAL 7 P-ON+3.3V P-ON+5V AL+3.3V

R3208 OPEN R3135 OPEN

(NO CONNECTION) CN3104 GND 10 NU 9 EJTCK 8 JTDI 7 JTDO 6 JTMS 5 TRSTN 4 EVTRG 3 XRST 2 AL+3.3V 1

R3112 100

CONTINUE DIGITAL 8 STB-RESET STMTIME1

R3127 OPEN R3136 10K

R3113 R3129 100 10K

R3198 10K R3125 OPEN

AA7 U9 AD8 AB7 Y8 L21 AC5

MEMORY I/F

TO DIGITAL MAIN 6 IC3104(5/7)

NU NU NU NU NU NU NU

R3210 OPEN

R3130 OPEN R3126 OPEN

R3224 1K R3115 OPEN

P6 VCOM-PWM G6 NU H6 COMP-DET G4 NU M3 NU L2 HP-DET D20 NU A20 NU W20 NU V20 NU Y22 NU AA22 NU AB23 NU W21 NU U20 NU V21 NU Y21 NU U19 NU W19 NU V19 NU AB22 NU U21 NU

R3116 OPEN R3118 1K R3122 OPEN

E24 G21 E23 D25 C25 D24 J19 H19 L20 J23 L19 N20 K19 N21 M20 M19 J20 P20 K21 N19 P19 M21 F25 H20 F23 F24 F22 H21 K20

NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU

MMCDAT0 MMCDAT1 MMCDAT2 MMCDAT3 MMCDAT4 MMCDAT5 MMCDAT6 MMCDAT7

NANDRYBY NFALE NFCLE XNFCE XNFWE XNFWP XNFRE NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU NU

B22 A22 D21 C21 B21 E20 B20 C20

1 NU

NU 48

2 NU

NU 47

3 NU

NU 46

4 NU

NU 45

5 NU

I/O7 44

MMCDAT7

6 NU

I/O6 43

MMCDAT6

7 R/B

I/O5 42

MMCDAT5

I/O4 41

MMCDAT4

R3205 R3201 R3202 R3203 R3190 R3189 R3204

D22 B23 C23 A23 A24 B24 E21 C22 F20 J24 J22 G24 G23 H23 G22 H22 K22 J25 P22 P25 R20 T21 R22 R21 T20 T19 R19 P24 P21 AB18 Y18 Y17 W17 W15 AA17 W18 AC19 Y16 AD19 W16 Y20 AB19 AE20 AB20 AA18 AD20 AA21 Y19 AA19 AA20 AC20

R3128 10K R3123 10K

R3170 150

MMCDAT0 MMCDAT1 MMCDAT2 MMCDAT3 MMCDAT4 MMCDAT5 MMCDAT6 MMCDAT7

10K 10K 10K 10K

AD4 AXO C3124 12P

IC3102 H27U1G8F2BTR-BC (NAND FLASH MEMORY)

R3169 OPEN

X3101 25MHz

C3126 0.1

R3132 R3121 R3124 R3173

C3128 15P CONTINUE DIGITAL 1 VCOM-PWM

C3125 0.1

22 75 75 75 75 75 75

8 RE 9 CE

NU 40

10 NU

NU 39

11 NU

NU 38

12 VCC

VCC 37

13 VSS

VSS 36

14 NU

NU 35

15 NU

NU 34

16 CLE

NU 33

17 ALE

I/O3 32

R3192 56x4

R3191 56x4

MMCDAT3

18 WE

I/O2 31

MMCDAT2

19 WP

I/O1 30

MMCDAT1

20 NU

I/O0 29

MMCDAT0

21 NU

NU 28

22 NU

NU 27

23 NU

NU 26

24 NU

NU 25

DIGITAL MAIN CBA UNIT

V 10-8

X PL14.24SCD4

Digital Main 5 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3101. IC3101 is divided into seven and shown as IC3101 (1/7) ~ IC3101 (7/7) in this Digital Main Schematic Diagram Section.

CONTINUE DIGITAL 7 P-ON+5V P-ON+3.3V

CONTINUE DIGITAL 8 UART1TX UART1RX R3193 100 R3194 100 R3217 1K (NO CONNECTION) GND UARTORX UARTOTX P-ON+5V

CN3101 4 3 2 1

R3176 100 R3175 100 C3115 OPEN

C3116 R3101 OPEN 10K

M1 N4 M2 P5 F21 G20 B25 D23 C24 E22

C3041 OPEN

AB9 AC9 Y12 AA15 W14 W10 Y13 W8 AA8

DEMODULATOR /MPEG DECODER

L3706 OPEN

AE9 N22 USB0(-) M24 USB0(+)

C3742 220/6.3V

C3739 1

2 GND

R3172 2.49K

3 /FLAG EN 4 R3761 10K

CN3701 1 2 3 4 5 6

SCL

IF-AGC

DIF-OUT1

DIF-OUT2

C3040 10

C3039 OPEN

D3007 MM5Z5V6B

C3002 OPEN

D3001 OPEN

C3003 OPEN

D3002 OPEN

C3011 0.1

L3003 3.3uH

R3005 270

C3026 OPEN C3014 0.1

C3013 39P L3004 3.3uH

R3003 270

TO DIGITAL MAIN 6 IC3101(5/7) IF-AGC AA13 TU-SDA AA16 TU-SCL Y15

R3004 10K

R3011 4.7K R3025 4.7K

AB8 NU N23 USB0VBUS

R3001 10K R3006 33 R3007 33 C3009 0.1

C3010 OPEN

C3008 0.1

D3010 OPEN

R3177 10k

K23 NU K24 NU N24 USB0OD

CN3706 R8 R7 R6 R5 R4 R3 R2 R1

L3701 OPEN

CN3705 4 3 2 1

NU U10 RX(-) AC8

M22 USB1(-) L23 USB1(+) R3734 0

WIRELESS LAN MODULE USB1(+) USB1(-) USB+5V GND GND GND

C3727 0.1

R3758 100

(NO CONNECTION) USB+5V USB1(-) USB1(+) GND

C3027 OPEN TO DIGITAL MAIN 6 IC3101(5/7)

IC3701 AP2151WG-7 (HIGH SIDE SWITCH) 1 VOUT VIN 5

NU NU NU NU NU NU NU NU NU

C3117 R3108 OPEN OPEN

CN3704 1 2 3 4

L3005 2.2uH

NU NU NU NU UART1RX UART1TX NU NU UART0TX UARTOTX

AD9 (USB JACK) USB+5V USB0(-) USB0(+) GND

SDA

*1 IC3101(4/7) MN2WS0270HA DIGITAL SIGNAL PROCESS /MAIN MICRO CONTROLLER

GND

+3.3V

TU3001 TUNER UNIT

R3735 OPEN

R3736 0

R3180 10K

RX(+) AC7 TX(-) AE6 M23 USB10D TX(+) AD6

IC3702 OPEN 1 VOUT VIN 5 C3716 OPEN

C3744 0.01

(ETHERNET JACK) GND NU RX(-) RCT RX(+) TX(-) TCT TX(+)

C3701 0.01

C3715 OPEN

2 GND

M25 USB1VBUS

3 /FLAG EN 4 R3704 OPEN

C3714 OPEN

R3702 OPEN

CONTINUE DIGITAL 7 CTRL11

CTRL11 AC6 C3129 1

1 DIGITAL MAIN CBA UNIT

AB 10-9

AD PL14.24SCD5

Digital Main 6 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3101. IC3101 is divided into seven and shown as IC3101 (1/7) ~ IC3101 (7/7) in this Digital Main Schematic Diagram Section. *1 IC3101(5/7) MN2WS0270HA DIGITAL SIGNAL PROCESS /MAIN MICRO CONTROLLER

DIGITAL MAIN CBA UNIT JK3701 COMPONENT-Y /VIDEO-IN COMPONENT -Pb-IN

COMPONENT -Pr-IN CONTINUE DIGITAL 4 COMP-DET HP-DET

C3705 39P

D3705 OPEN

R3166 75

C3770 39P

D3701 OPEN

R3163 75

C3703 39P

D3704 OPEN

R3741 33 DIGITAL AUDIO OUT (COAXIAL)

R3727 100

C3720 100P C3709 1

JK3706

AUDIO(L)-IN

AUDIO(R)-IN

Q3709 2SC4081UBTLQ (BUFFER) C3707 33P

R3725 220

C3708 100P

D3702 OPEN

R3726 110

C3710 56P

R3708 10K

D3703 OPEN

C3711 56P

R3709 10K

D3707 OPEN

C3121 C3118 C3119 C3120 C3109 C3113 C3114

R3164 75 C3706 0.01

R3723 10K

C3704 1

R3724 10K R3171 75

R3168 75

1 1 1 1 1 1 1

R3214 R3216 R3218 R3219 R3220 R3221 R3222

10 15

A/D CONVERTER

TO DIGITAL MAIN 3 IC3101(2/7)

DIGITAL SIGNAL PROCESS

R3167 75 R3155 100 R3154 100

R3147 R3148 R3149 R3145

JK3713 PC-RGB-IN

10 10 10 10 100 100 100

AE12 NU AC12 NU AD12 NU Y9 NU Y10 NU AA9 NU AC10 NU AB10 AD11 AB11 AC11 AD13 AB13 AC13

36 36 36 36

C3103 C3104 C3105 C3102

TO DIGITAL MAIN 4 IC3101(3/7) TO DIGITAL MAIN 8 IC3101(7/7)

Y11 VGA-HSYNC AA12 VGA-VSYNC

TO DIGITAL MAIN 5 IC3101(4/7)

1 1 1 1

W11 AA11 AB12 AA10

R3195 10K R3196 10K R3197 10K

E4 D2 F6 G5 E3

TO DIGITAL MAIN 1 IC3101(1/7) NU NU NU NU NU

R3199 OPEN

CONTINUE DIGITAL 7 P-ON+5V P-ON+3.3V AMP+13V

OPEN OPEN OPEN OPEN OPEN D3717 D3716 D3715 D3714 D3713

R3831 10K R3830 10K

D3711 1SS400 R3839 47K R3838 47K

C3207 1 C3208 1

D3712 1SS400

CONTINUE DIGITAL 8 VGA-SCL VGA-SDA

SPDIF F4 R3297 100K AE14 R3298 100K AC14 AB14 NU AC15 NU AC16 NU AD16 NU AB16 NU AE17 NU AD17 AC17 AB17 AC18 E2 AUDIO-MUTE F5 ARC-OUT

TO DIGITAL MAIN 8 IC3101(7/7) AUDIO I/F TO DIGITAL MAIN 5 IC3101(4/7)

CONTINUE DIGITAL 8 ARC-OUT

CONTINUE DIGITAL 2 P-ON-H2 R3751 47K

R3733 4.7K

R3809 10K

R3728 C3713 220/6.3V 3.3

R3810 OPEN

R3729 R3737 3.3 10K

R3820 0

1 C3830 OPEN

R3822 10K R3832 OPEN

R3823 1.8K R3824 10K

CONTINUE DIGITAL 8 SP-MUTE

R3825 47K

R3828 OPEN

R3812 100K C3805 1

C3818 1

5 6

R3821 0

C3817 1 C3819 1

R3814 OPEN

R3817 OPEN

R3815 OPEN

R3818 OPEN

R3816 OPEN

R3819 OPEN

PWM LOGIC

C3806 1

R3833 OPEN

7 AVCC

8 GND

C3802 0.22 C3803 0.22

9 GVDD

C3827 0.047

GND 19

10 POWER LIMIT

PWM LOGIC

13 NU

PVCCR 16

14 PBTL

PVCCR 15

C3804 0.22

C3831 OPEN

C3828 2.2

18 DRIVE

R3743 10K

JK3801 HEADPHONE JACK

Q3708 OPEN Q3701 OPEN

Q3710 OPEN

L3801 10uH

GND 24

GAIN CONTROL

R3752 OPEN

R3738 C3712 220/6.3V 10K

R3744 OPEN

C3718 OPEN

R3713 OPEN

C3801 0.22

DRIVE

DRIVE R3808 10K

R3740 OPEN

R3732 OPEN

PVCCL 27

DRIVE R3807 OPEN C3816 1

PVCCL 28

POWER LIMIT

R3806 0

C3815 1

R3731 OPEN R3739 OPEN

CONTROL LOGIC

R3805 OPEN Q3822 2SC4081UBTLQ (SWITCHING)

C3842 10

IC3803 TPA3110D2PWPR (AUDIO AMP)

R3813 10

Q3821 2SA1576UBTLQ (SWITCHING)

CONTINUE DIGITAL 7 HP-MUTE AUDIO-MUTE LCD-P-ON

C3824 0.047

C3825 2.2

R3826 OPEN

R3811 1K

R3746 10K

C3826 220/16V

R3801 OPEN C3807 OPEN L3802 10uH

C3811 1000P

C3820 1

C3834 OPEN

C3838 D3801 OPEN OPEN

R3802 OPEN C3808 OPEN L3803 10uH

C3812 1000P

C3821 1

C3835 OPEN

C3839 D3802 OPEN OPEN

R3803 OPEN C3809 OPEN L3804 10uH

C3813 1000P

C3822 1

C3836 OPEN

C3840 D3803 OPEN OPEN

R3804 OPEN C3810 OPEN

C3814 1000P

C3823 1

C3837 OPEN

C3841 D3804 OPEN OPEN

CN3801 1 2 3 4

SP(L)+ SP(L)SP(R)SP(R)+

SP3801 SPEAKER L-CH

SP3802 SPEAKER R-CH

C3843 C3829 220/16V 10

AH 10-10

AJ PL14.24SCD6

Digital Main 7 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3101. IC3101 is divided into seven and shown as IC3101 (1/7) ~ IC3101 (7/7) in this Digital Main Schematic Diagram Section. CONTINUE DIGITAL 1 P-ON+21V P-ON+3.3V CONTINUE DIGITAL 2 P-ON+21V P-ON+3.3V

CONTINUE DIGITAL 6 HP-MUTE AUDIO-MUTE LCD-P-ON

R3610 OPEN

R3611 OPEN

Q3601 OPEN

C3645 4.7

R3612 OPEN

C3656 0.1

C3654 OPEN

SS 8

2 VIN

EN 7

3 SW

C3601 0.015

AFB R4

R3689 OPEN

C3183 OPEN

FB 5

C3646 OPEN

C3641 10

R3676 OPEN R3624 OPEN

R3613 OPEN

C3643 10

C3642 OPEN

C3638 0.015 R3625 2.2K

AVDDVAD11 U12 LVVDD11 K11 VDD11 *A AVDDH11 AC21 AVDDH11 AD21

C3644 OPEN

R3607 56K

IC3601 PST8429UR (RESET) 1 GND OUT 4

R3602 220

CN3601 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

2 VDD

D3601 OPEN

D3603 OPEN

R3620 100 R3603 100 R3645 R3629 R3647 D3602

CONTINUE DIGITAL 6 P-ON+5V P-ON+3.3V AMP+13V

C3609 OPEN IC3603 MP1472GJC452Z (+3.3V REG.) C3607 0.033 1 SS BST 8

C3606 0.01

R3608 270

R3606 C3611 11K 3300P

C3604 OPEN

100 100 100 OPEN

2 EN 3 COMB 4 FB

R3604 6.2K

C3652 OPEN

D3607 OPEN

SW 6 GND 5

R3677 15K R3605 1K

L3604 22uH C3608 10

R3628 1K

C3612 0.01

VIN 7

C3603 10

C3614 10

R3687 OPEN C3967 OPEN

D3610 MM5Z4V3B C3674 4.7

C3673 OPEN IC3602 MP1472GJC452Z (+1.5V REG.) C3661 0.033 1 SS BST 8

C3676 OPEN

D3605 MM5Z15B

R3622 10K Q3602 2SA1576UBTLQ (SW+12V)

Q3603 2SC4081UBTLQ (SWITCHING)

C3665 R3627 OPEN 100K D3609 OPEN D3608 1SS400

R3633 10K R3095 10K

R3619 10K R3621 OPEN

R3635 C3666 5.1K 4700P

2 EN 3 COMB 4 FB

C3613 OPEN

T9 AB4 T10 N12 N13 M12 AB21 M13 L11 M11 N11 W9 J4 L22 AD14 T16 R15 U15 R16 U11 AB15

C3675 0.1

C3650 OPEN

R3618 4.7K

CONTINUE DIGITAL 4 P-ON+3.3V P-ON+5V AL+3.3V

C3615 0.1

CD 3

C3602 1

AVDD11-CEN AVDD11-RX DVDD11 VDD33-1 VDD33-2 DPAVDD33 AVDDH33 VDDEM18-33 LVVDD33-1 LVVDD33-2 LVVDD33-3 VCOMP LVDSRREF USBRREF VREF1V5 AVDDHP33 AVDDPLL33 AVDDV33 AVDDAPUSB33 AVDDDMD33 AVDDEVE33

C3605 1000P C3616 4.7

C3668 470/4V

C3136 10

C3142 10

C3138 1

C3139 1

C3143 1

C3144 1

C3130 0.1

C3667 0.01

C3147 0.1

C3148 0.1

C3149 0.1

C3178 1

C3179 1

C3156 10

C3157 0.1

C3180 R3186 R3187 C3181

C3155 0.1 1 24K 6.2K 1 C3159 10

L3103 2.2uH C3160 0.1

C3161 0.1

C3162 0.1 L3104 BEAD L3105 BEAD L3107 BEAD

C3164 0.1 R3185 560 C3166 10

C3167 0.1

C3135 10 R3183 0

C3169 0.1 AVDD33-CEN P10 AVDD33-TX P9

C3669 OPEN

C3610 1

C3158 0.1 L3101 BEAD

VDDSD18-33 J21

SW 6

C3131 0.1 CONTINUE DIGITAL 5 CTRL11

C3165 10

GND 5

C3671 10

C3132 1

AVDDADA33 T15

L3603 10uH C3670 10

L3102 0

C3163 0.1

VIN 7

R3679 6.2K R3634 100 C3672 10

C3134 1

R3181 0

C3133 OPEN

C3969 OPEN

R3601 OPEN

R3223 0

COMP 6

L3601 10uH

R3615 10K

C3170 0.1

L3106 BEAD C3171 0.1

C3177 10

R3184 0

VDDTCON25-33 M9 C3168 0.1

R3685 OPEN C3968 OPEN

STMADAVDD33 M10 STMRONA T4 VDDSTM33 L10

CONTINUE DIGITAL 3 AL+3.3V VCC+1.5V

C3174 0.1

C3173 10

C3172 1

C3153 10

C3152 1

C3141 1

C3145 1

C3146 1

C3137 1

C3140 1

C3151 1

C3184 1

C3185 1

VDDIO15 *B C3625 4.7

CONTINUE DIGITAL 5 P-ON+5V P-ON+3.3V

C3655 0.1

1 BS

4 GND

CONTINUE DIGITAL 1 BACKLIGHT-ADJ TO POWER SUPPLY CBA CN501 NU PROTECT1(NU) PROTECT3 RESET BACKLIGHT-SW P-ON-H2 BACKLIGHT-ADJ AL+3.3V GND GND GND GND GND GND AMP+13V AMP+13V AMP+13V AMP+13V GND P-ON+21V P-ON+21V P-ON+21V P-ON+21V

C3639 0.01

*1 IC3101(6/7) MN2WS0270HA DIGITAL SIGNAL PROCESS /MAIN MICRO CONTROLLER

R3626 0

IC3604 RT8293ALZSP (+1.14V REG.)

R3609 10K

CONTINUE DIGITAL 8 STB-RESET LCD-P-ON BACKLIGHT-SW PROTECT3 PROTECT1 P-ON-H2 HP-MUTE

C3182 2700P

C3630 OPEN R3630 0

C3631 OPEN IC3607 MP1472GJC452Z (+5V REG.) C3617 0.1 1 SS BST 8

C3632 0.1

R3631 0

R3623 22K CONTINUE DIGITAL 8 P-ON+5V P-ON+3.3V AL+3.3V

C3618 OPEN

R3614 C3619 4.3K 4700P

2 EN 3 COMB 4 FB

D3606 1SS400

R3617 10K

C3620 0.01

VIN 7 SW 6 GND 5

R3678 12K R3616 33K

D3615 KDZTR6.8B

L3605 22uH C3628 10

C3621 10

C3623 OPEN

DIGITAL MAIN CBA UNIT

VDDIOCK15 VDDSTM11 FPEN TESTSEL NU GND

R3696 OPEN C3966 OPEN

AN 10-11

HEAT SINK

R3022 0 R3023 0 R3024 0

D5 N10 N9 R12 *C *D

C3175 1

C3150 1

L3108 BEAD

C3154 0.1

*A:J11~J17,K12~K17,L14~L17,M15~M17 *B:E9,F8,F9,G13~G15,G19 *C:H5,P23,R13,R23,R24,T13,T22,T23,U22,U24,U25, V5,AD1,AD2,AE2 *D:A1,A9,A25,C10,D13,E5,E6,E12,E13,F7,F13,F15, G17,G18,H7,H8,J9,J10,K9,K10,L9,L12,L13,M14, N6,N7,N14~N17,P11~P17,R10,R11,R14,R17,T11, T12,T14,T17,U13,U14,U16,U17,W12,W13,Y14, AA14,AC4,AE1,AE25

AP PL14.24SCD7

Digital Main 8 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3101. IC3101 is divided into seven and shown as IC3101 (1/7) ~ IC3101 (7/7) in this Digital Main Schematic Diagram Section.

DIGITAL MAIN CBA UNIT R3144 0

CONTINUE DIGITAL 6 ARC-OUT

Q3107 OPEN

R3188 OPEN

R3209 OPEN R3200 OPEN R3206 OPEN

(NO CONNECTION) CN3103 AL+3.3V 1 P-ON-H2 2 R3131 1K

R3207 OPEN

R3215 OPEN

R3109 10K

Q3108 OPEN

R3212 100K

CONTINUE DIGITAL 2 PROTECT3

R3120 OPEN C3100 OPEN

CONTINUE DIGITAL 7 P-ON+5V P-ON+3.3V AL+3.3V

TO IR SENSOR CBA UNIT CN4052 SDA(NU) SCL(NU) GND KEY-IN1 REMOTE LED1 LIGHT P-ON+5V AL+3.3V

Q3103 OPEN

AA4 Y1 AB1 AB3 AB2 Y4 V6 AA3 V4

NU NU NU NU NU NU NU NU NU

AD24 AE24 AD23 AE23 AC23 AE22 AD22 AC22 Y23 AA24 AA23 AB25 AB24 AC25 AC24 AD25 U23 V24 V23 V22 W23 W22 Y25 Y24

HDMI I/F

W4 LED2 R3143 OPEN

R3096 22K CN3105 1 2 3 4 5 6 7 8 9

R3117 10

Y5 SW-EN U3 REMOTE V3 LED1

R3107 100

R3146 100K C3107 OPEN

C3101 0.1

C3111 0.1

C3110 OPEN

R3110 33

R3102 1K

C3112 OPEN

R3323 33 R3119 OPEN

C3108 1

R3103 OPEN

R3105 100

R3114 33 D3101 MM5Z5V6B

AUDIO DECODER

R3104 27K

R3159 0

R3162 22 R3133 100

R3138 OPEN

CONTINUE DIGITAL 6 SP-MUTE

TO DIGITAL MAIN 6 IC3101(5/7)

T2 U5 AD5 W2 W3 Y2

PROTECT3 PROTECT1 STB-RESET LCD-P-ON BACKLIGHT-SW P-ON-H2

TO DIGITAL MAIN 6 IC3101(5/7) HDMI-CEC STMCECPUL HDMI0-SCL HDMI0-SDA HDMI1-SCL HDMI1-SDA HDMI2-SCL HDMI2-SDA

IC3103 M24C16-WMN6TP (MEMORY) 1 A0 VCC 8 2 A1

WP 7

3 A2

SCL 6

4 VSS

SDA 5

R3152 4.7K

R3701 10K

Y3 T6 T7 W6 R9 AE3 V7 AA5

R3134 R3137 R3139 R3140 R3141 R3142

R3785 47K

AC2 STM-SCL AC1 STM-SDA U4 STM-EEPROM-WP

VGA-SCL VGA-SDA NU HDMI-UART-CTRL

R3151 10K

Q3706 OPEN

Y7 AD3 U7 Y6

R3865 22

R3720 33K

Q3704 2SC4081UBTLQ (SWITCHING)

C3750 0.1

R3778 47K

R3712 10K R3711 10K

R3774 47K R3775 1K Q3703 2SC4081UBTLQ (SWITCHING)

JK3716 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

HDMICONNECTOR-3 DATA2(+) TMDS DATA2 SHIELD DATA2(-) DATA1(+) TMDS DATA1 SHIELD DATA1(-) DATA0(+) TMDS DATA0 SHIELD DATA0(-) CLOCK(+) TMDS CLOCK SHIELD CLOCK(-) HDMI-CEC NU HDMI-CLOCK HDMI-DATA GND +5V HOT PLUG DETECT

JK3715 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

HDMICONNECTOR-2 DATA2(+) TMDS DATA2 SHIELD DATA2(-) DATA1(+) TMDS DATA1 SHIELD DATA1(-) DATA0(+) TMDS DATA0 SHIELD DATA0(-) CLOCK(+) TMDS CLOCK SHIELD CLOCK(-) HDMI-CEC NU HDMI-CLOCK HDMI-DATA GND HDMI+5V HOT-PLUG-DETECT

R3776 OPEN

C3717 220P

R3717 0 Q3705 2SC4081UBTLQ (SWITCHING)

R3773 47K

R3777 10K

R3714 10K

HDMICONNECTOR-1 DATA2(+) TMDS DATA2 SHIELD DATA2(-) DATA1(+) TMDS DATA1 SHIELD DATA1(-) DATA0(+) TMDS DATA0 SHIELD DATA0(-) CLOCK(+) TMDS CLOCK SHIELD CLOCK(-) HDMI-CEC ARC HDMI-CLOCK HDMI-DATA GND +5V HOT PLUG DETECT

R3783 OPEN

R3165 39 R3178 39

R3772 OPEN

Q3702 2SC4081UBTLQ (SWITCHING)

C3719 220P

R3771 OPEN

R3780 47K R3779 1K

R3710 10K

JK3717 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 R3719 OPEN

HDMIO-5V AB5 HDMI1-5V AA6 HDMI2-5V AC3 R3863 27K D3722 1SS400

R3781 47K

R3784 10K

R3707 10K

R3153 4.7K R3156 39 R3157 39 R3158 22

39 39 39 39 39 39

HDMI0-HPD R7 HDMI1-HPD U2 HDMI2-HPD U6

R3730 0

CONTINUE DIGITAL 5 UART1TX UART1RX

Q3707 2SC4081UBTLQ (SWITCHING)

R3179 100

C3759 0.1 AB6 P-ON-H2 W7 HP-MUTE W5 STMTIME1 AA2 SP-MUTE

C3127 0.1

R3706 47K R3705 1K

R3703 10K

T3 LIGHT-SENS

C3106 R3182 33/10V OPEN

R3161 100 R3160 100

CONTINUE DIGITAL 7 STB-RESET LCD-P-ON BACKLIGHT-SW PROTECT3 PROTECT1 P-ON-H2 HP-MUTE

R3722 47K

VIDEO DECODER

U1 KEY-IN1 R3150 10K

R3718 47K

R3721 10K C3702 0.1

R3008 R3014 160 82

Q3102 2SC4081UBTLQ (BUFFER)

R3106 10K

Q3101 2SC4081UBTLQ (LED DRIVE)

C3122 OPEN C3123 OPEN

CONTINUE DIGITAL 4 STB-RESET STMTIME1

R3002 C3012 1 10K

*1 IC3101(7/7) MN2WS0270HA DIGITAL SIGNAL PROCESS /MAIN MICRO CONTROLLER

R3715 10K

CONTINUE DIGITAL 6 VGA-SCL VGA-SDA

R3716 33K

AT 10-12

AV PL14.24SCD8

Function Schematic Diagram

FUNCTION CBA UNIT

2 TO IR SENSOR CBA UNIT CN4051 CN4001 GND 1 KEY-IN1 2 C4002 0.1

D4001 MM5Z5V6B D4002 OPEN R4006 2.2K

SW4007 POWER

R4005 2.2K

SW4006 SOURCE

R4004 2.7K

SW4005 MENU

R4003 4.7K

SW4004 CH UP

R4002 8.2K

SW4003 CH DOWN

R4001 18K

SW4002 VOL UP

SW4001 VOL DOWN

1 UNLESS OTHERWISE SPECIFIED: SWITCHES ARE SKRMABE010.

C 10-13

PL14.24SCF

IR Sensor Schematic Diagram

R4060 OPEN

D4051 SMLE12WBC7W1HR POWER

1 2 3

C4054 0.1

R4053 15K

V-OUT GND Vcc

RS4051 RS-272 (REMOTE SENSOR)

R4051 56

R4052 6.8K R4054 1K

C4051 10

C4056 10

CN4052 1 2 3 4 5 6 7 8 9

C4052 1000P C4053 0.1

R4055 10K

R4059 OPEN

R4058 OPEN

R4056 10K

C4055 OPEN

IC4051 BH1603FVC-TR (LIGHT SENSOR) 1 IOUT GC2 6 R4057 360K

2 GND

GC1 5

3 VCC

NU 4

TO DIGITAL MAIN CBA UNIT CN3105 AL+3.3V P-ON+5V LIGHT LED1 REMOTE KEY-IN1 GND SCL(NU) SDA(NU)

C4057 0.1

1 TO FUNCTION CBA CN4051 UNIT CN4001 GND 1 KEY-IN1 2

IR SENSOR CBA UNIT

C 10-14

PL14.24SCIR

Power Supply CBA Top View CAUTION ! Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. If Main Fuse (F602) is blown , check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the power supply circuit to fail.

Because a hot chassis ground is present in the power supply circuit, an isolation transformer must be used when repairing. Also, in order to have the ability to increase the input slowly, when troubleshooting this type of power supply circuit, a variable isolation transformer is required.

CAUTION ! : For continued protection against risk of fire, replace only with same type 2.5A, 250V fuse. ATTENTION : Utiliser un fusible de rechange de mÃªme type de 2.5A, 250V.

2.5A 250V

NOTE: The voltage for parts in hot circuit is measured using hot GND as a common terminal.

J1618

J602

C1602

J1617

R601

IC1602

AMP+13V

SA601

J1271

J661

IC601

Drive

FB IC601

L602 C620

D620 T601

56 D6

J610

Vout

J1611

UVLO3

D603

C652

C602

GP003

GND

Vout

C1621

Vout

12 D7

J1614

J1203

BC1601

C1612

PFC

GND J704

J703

C1708

PFC

J1305

GND

J1204

D607 D605

L1201

SPWM3

C605

64 D6

D652

VLED3

Vcc+15V

Anode

L601

C665

J666

J665

J1210

ZCD

R618

C650

C619

C1317

C614

J609

D650

C1303

D1301

J1301

LED+48V

IC601

C60

J1307

OVP3

JS1235

BC602 C656

J1308

ADIM3

J1306

IC601

J608

R1315

D1301

L1301

Vcc3

GND

J1304

J1314

ZCD

J605 PFC GND

D650

J1315

IC604

IC601

C654

J1415

SPWM4

TOP SIDE

J657

C651

AMP+13V

Vcc

J601

Gate

GND

J1316 SPWM3

NEUTRAL

C604

J607

C616

J1303

J1317

Protect3

P-ON+21V

C728

Q702

AMP+13V

AMP+13V C1403

IC601

C1417

J1302

LIVE

D619 D658

VLED4

C655

Q1301

BL-SW J1311

D621

J1407

J1309 ILED3

J1313 BL-ADJ J1312

C1618

D654

OVP4

CN601

F602

C615 J662

Cathode

T 2.5A L/250V

J606 Vcc+15V

IC602

D660

D660 UVLO4

Vout J1405

J654 Reference

D655

C657

J1406

Protect3

C692

RISK OF FIRE REPLACE FUSE AS MARKED

IC601

ADIM4

D715

D1401

R1415 J1402 CN1101 J1413

Base

P-ON J663

J651

J653

D1401 J1401

Vcc4 J1404

BL-SW GND

J652

J1411

J1403

J658 Q701 D715

CAUTION -

J659

AMP+13V ALL+3.3V

Gate

Q1401

BL-ADJ

J1412

AMP+13V

J1416

AMP+13V

CN501 L1401

GND GP002 J102

Outer

J656 J664

J655 P-ON+21V

CN1301 J1410

J660

3 BA4GU5F0102 1

2 CN1401

Base

D60

UVLO2

C1217

D601

Vin

PFC

J1601

J1602

UNDER SIDE

D1714

C1613

GDA

J1608

J1209

J1616

J1607 ZCDB

J1603

GDB

GND

J1604

Pri

GND

C1707

J1268

ILED2

Vcc+15V

VREF

J1253

J1704 IC1701 IC1701 J1701

J1702 Q1701

Cathode

T1602

Q1704

Collector

J701

LED+48V

J103 GND

J1605 J1615 COMP

GP004

VSENSE C1711

C1709

C726

Outer J1105

T1601 J1609 Pri GND

VLED1 C1117

COLD

OVP1

J1619 Vcc+15V J1610

J702 D704

J1107

C1706

PFC

FB Vcc

Vout

J1101

D704

GP001

J1106

Out

IC1702

UVLO1

Outer

J1703 IC1701

R1719

C1103

J1102

J1274

BC1703

D713 J1705

L1101

D1101

J1108 LED+48V

C724

D1707

J1103

C723

GND

ADIM1

J604

T1701 D7 10

J1205

J1273

C161

ILED1

Gate

D1101

GND

J1116

R1115

J1269

C1615

D160

J1114

Vcc1

GND

J1104

SPWM2

J1215

J1109 Q1101

D602

J1206

Protect3 J1213

BC1602

D1603

OVP2

BL-SW

J101

D606

Vout D1201 J1202

C172

Vout

J1612 PFC Vout J1620 D1714 Cathode

VLED2 J1207

ADIM2

BL-ADJ

PFC

JS1135 J1272

C1626

J1613

C72

GND

J603

C1203

LED+48V

J1216

J1211 J1212

Vcc+15V

J1208 J1201

Gate

D1201

Q1201

J1214 Vcc2

GND

R1215

R1624

TOOL NO. 1 2 3 4 5 6 7 8 9 10

10-15

BA4GU5F01021

C1405

D657

R1406 C1404 R1402

C1306 R1309 C1307 C1320

R1319

C665

R631

D664A

D613A

R624 R603

R1312

R1311

J1312

R1307

R1335

R1308

R1333

J1315

R1306

D1304

C652

R630

R610

JS1235

R1316 R1317 C1308

D1305 R1322

J1305

C1304 R1302 R1303 R1327 R1326

R1325

R1323

D1303

J1611

C1314

R1324

R1310 C1305

C1302

C1303

C1301

R604

D652A

R617

J1301

C1312

R1332 C1310 C1311

R1301

D1301

R1315 C1309

J1304

J1314 R1318

R1320

R656

R663

L1301

R1410 R1407 R1403 R1427

D1301A

R1313

D1302

R1328

R1321 C1313

R1331

R1408 R1409 C1406 C1420 C1407 R1412 R1411 R1330

R1329

J1415

R1433 R1304 R1305

D1306 Q1301

D1403

D656A

C654

L1302

R1426 R1425

D1404

R1422

D1405

C1416 C1415 C1414 R1424 R1423

R651

T601

BC602

R605

R611

R662

R652

R668 R661 R660 R658

R1633

R606 D619A

D620A

R608

C608

R609

J609 C607

J102 R1432 C1411 C1410 R1419

R1431

R1420

D1402

C1412

J1404 IC1401

D654A

Q653

R1417

C1409

J1405

R1418

R754 R755 R751 C729 J657 R704 R669

R654

C660 R659

D615 D611

GP002

J1411

J1412

R1429 R1430 R1421 C1413 R1428

R1413

C1408

D1401 J1401

C1403

R753

R1401 C1402 C1401

R1416

D1401A

J653 J652 J651

Q702 R702

Q654

C728

D716

C638

D1406

C637

C639

R1405

L1402 L1401

R756

R748 Q703

Q650

Q701 C701 D662 D661

R657

R691 R667 R674

R675 R655

Q1604

J1617

D621A

R635 D617

J1317

R614 R607 R625 R626

R1230

R1229

R1204

R1205 D1202 D1206 R1213 J1204

C1316 C1315

L1201

GP003

C602

L1202

D1201A

J704

J703

C1621

R1221 R1231

C1211

R1232

C1210 R1219

C1213

R1220

C1212

J1214 R1218

R1228

R1215 C1209

R1217 D1201 C1208

R1746

R1747

C1202 C1201

C1203

R1201

J1201

J603 J604

D606

C1205

R1216 R1227

C1216

C1215 C1214 R1224

J1602

J1601

J1216

C72

R752 R750 R749 R701 R653 R703 R692 C691 R693

Q691

R1638

R1634

R619

C612

J608 C610 IC601

IC601

ZCD

D1204 D1205

R1130 R1129

Q1103

R1105

D1102

R1118

L1101

R1121

J1114 R1113

R1131

J101

C1104

R1123

GP001

C1709

R1126 R1125

J1105

D1104

C1610 R1655

D1610

C1606 C1604 R1608 C1605 R1609

R1605

R1604

R1620

R1619

R1618

R1711

R1705

R1708

R1122

D1105

C1004

C723

R1106 D1103

C1111 R1119 R1120

C1105 R1110 R1107

R1102 R1103 R1127 C1116

C1114 R1124

C1103

R739

C721 R740 R744

R743

Q1701

J1704

C1701 C1702 J1701

R1714

GP004

R1645

D1705A

R1710

Q1702

C1607 C1603

R1607

R1622

R1602

R1617

R1718

C1710

R1707

J1253

R1601

R1653

C1609 R1654 R1606 J1209 R1610

J1268

C1707

C1110 C1113 R1128

C1106 J1116 R1109 C1107 C1120 R1133 R1112 R1111

R1108

R1115

R1117

C1102

J1101 C1115

J1603

C1601 C1611

R1611

J1607 J1616 J1608

R1621

R1616

D1710

R741

R745

D713A

C1101

R1132

R1116 C1108 D1101

R1101

C722

R738

C1112 C1109

D1711

R1702 D1707A

R1701

R1625

R1629

BC1703

D1707

J1705

R1720

IC1701

R1703 C1703 R1704

J1205 L1102 R1222

J1104

D1106

R1207 C1204 R1202

R1208

C1206 R1209 C1207 C1220 R1212 R1211 J1215

R1233

R1226 R1225

R1203

R1223

T1701

D1704 C1704 R1709

D1714A

D1714

Q1601

R1627 C1613 R1630

R1626

R1623

R1615

R1614

BA4GU5F01021 10-16

C1117 J701 C726 C1711

J1269

E J103 C1608

J1274 J1702 R1712

D663

IC1602

R1639 C1602

R633

R632

D618

D609A

C611

R634

C625

R623

R1612

R1613

J1605 J1615

J1107

J1102 J702

J1106

J1273

IC1101 Q1704

R1719 J1619

J1103 C724 D713

R1206

D J1703

R1104 D1203 D1101A

J1202

Q1101

JS1135 J1272 J1207

J1213 J1109

10 D7

C1217

J1206 Q1602

J1108 C1706

J660

J661

R1656 J1271 Q1607 R1637

R1657 D1608 J1618 SA601

D614

R613

R628

C622

R627

J1612

J1410

R601 J602 R629 C624

Q603 R620

C621

BC1602

C J1210 Q1201

J1211 J1212 4

J1208

R1210 C161

D704 J1610 IC1601 J1604

D7 D1603

J665

J1313 J1302

J1311 D652

IC1301 J666

L601

R1624

D650

J1316 Q1203 C1708

J1308

IC1201 6

D601

J1609

J1620 D160

C1615

IC1702 T1601 T1602

C1626

J1613 C172 D602

J1303

B C651 C60

C1317 D605

J1309

J1306 J1307 D607

D603

C619 C605

C650 R618

J1203 J1614 C1612 BC1601

Q601

D6 J610

C656 C614

C620

J1407

L602

4 D60

IC601 VH

C1417 D620

J1406

R1404 Q1401

Q1303 J605

J1402 C616

C655

R1415 D658 J607

J662 D621

J1403

CN1301 Q1403 CN501

CN1101 J1413 J601 IC604

D619

D654 D623

1 2 3

J1416 C657

D655 C615

J654 D660 IC602 J606 Vcc+15V

D715

CN1401 J655 Q705

J656 J664

A C604

J658 C692

J663 C1618 Q602

CAUTION ! : For continued protection against risk of fire, replace only with same type 2.5A, 250V fuse. ATTENTION : Utiliser un fusible de rechange de mĂŞme type de 2.5A, 250V. 2.5A 250V

J659 F602 CN601

4 BA4GU5F0102 1 5 6

Power Supply CBA Bottom View

NOTE: The voltage for parts in hot circuit is measured using hot GND as a common terminal.

SIDE

REAR

11-1

HEADPHONE JACK

USB JACK

PC-RGB-IN

HDMICONNECTOR-3

HDMICONNECTOR-2

HDMICONNECTOR-1

ETHERNET JACK

DIGITAL AUDIO-OUT (COAXIAL)

AUDIO(R)-IN

AUDIO(L)-IN

COMPONENT -Pr-IN

COMPONENT -Pb-IN

COMPONENT -Y/VIDEO-IN

WIRELESS LAN MODULE

TUNER UNIT CN3801

SP3802 SPEAKER R-CH

DIGITAL MAIN CBA UNIT

CL3801

SP3801 SPEAKER L-CH

CN3906

CN3601

CN3105

CL3013

CL501

CL3101

CN501

CN4052

CL4051 2

CN1301

LCD PANEL ASSEMBLY

CN4001

POWER SUPPLY CBA

CN1101

IR SENSOR CBA UNIT

CN4051

B CN601

AC CORD

FUNCTION CBA UNIT

WIRING DIAGRAM

PL14.24WI

EXPLODED VIEWS

LCD1

CL3013

A16

Digital Main CBA Unit

A20

A13 A9

CL501

A3-1

B23 A17

L23 B12 CL4051

CL3101

B19

L28 A26 L23

B18

L35 AC601

Function CBA Unit L23

A7 A8

L28

SP3801 B17

L23 CL3801

IR Sensor CBA Unit

S7 A26

B10

Power Supply CBA SP3802 X6

A3-2

L10 L28 L45 B18

B17

L28

SNA1 L28 SSK1 L45

See Electrical Parts List for parts with this mark.

A15 L10 SBA1 SSK1

12-1

PL14.24-A_CEX

Packing

SSK1

X3 SNA1

X1 Tape

Fixlon Tape

Packing Tape

S10

X22

SBA1 S4

Packing Tape

Some Ref. Numbers are not in sequence.

12-2

PL14.24-A_PEX

PARTS LIST [50PFL4909/F7 (Serial No.: DS1)] Mechanical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

Ref. No.

Description

Part No.

A3-1

REAR CABINET L A4DUAMA

2EMM00329

A3-2

REAR CABINET R A4GU0UT

2EMM00247

DECORATION PLATE A4D1BUH

2EMH00289

FUNCTION KNOB A4GF1UT

2EMM00237

KNOB FRAME A4DFAUT

2EMM00325

LED LENS A4DFAUT

2EMM00301

A13

JACK HOLDER A37U0UH

1EM334736

A15#

RATING LABEL A4DU2UH

----------

A16

LOGO LABEL A4DFAUT

----------

A17

ENERGY GUIDE LABEL A4DU2UH

----------

A20

LEADING EDGE COVER A4D1BUH

2EMM00294

A26

SPEAKER HOLDER A4GU0UT

2EMM00248

AC601#

AC CORD W/O A GND WIRE UL/CSA/1775/NO/ WAC172LTE010 BLACK

B10

STAND BRACKET A4GU0UT

2EMS00137

B12

SENSOR SHIELD A4GF1UT

2EMS00133

B17

WALL MOUNT BRACKET A4GU0UT

2EMS00136

B18

WALL MOUNT COVER A4GU0UT

2EMM00263

B23

WIRE LABEL A3AF0UT

----------

CL501

FFC WIRE ASSEMBLY 23PIN 23PIN/WHITE/ 364MM

WX1A4D1BS201

CL3013

FFC WIRE ASSEMBLY 51PIN(W/SHIELD) 51P/ WX1A4DUAP402 FFC/SHIELD/825.5

CL3101

FFC WIRE ASSEMBLY 9PIN 9PIN/WHITE/ 620MM

CL3801

WIRE ASSEMBLY 4PIN 4PIN/180MM&740MM

WX1A4GU5C502

CL4051

WIRE ASSEMBLY 2PIN 2PIN/630MM

WX1A4GU5C301

L10

SCREW F-PAN BLACK_NI +P-TITE M3X12.0 3X12 WASHER HEAD+BLK

GCHP3120

L23

SCREW BIND 3CHROM +S-TITE M3X6.0 M3X6 GBJS3060 BIND HEAD+

L28

SCREW F-PAN BLACK_NI +S-TITE M3X8.0 3X8 GCHS3080 WASHER HEAD+BLAC

L45

SEMS-SW PAN BLACK_NI + M4X10.0 M4X10 + FPH34100 BLK

SBA1

STAND BASE ASSEMBLY A4D17UH

SNA1

STAND NECK A4D17UH

2EMZ00151

SP3801

SPEAKER MAGNETIC 8OHM/10W S0411F19

DS08110XQ004

SP3802

SPEAKER MAGNETIC 8OHM/10W S0411F19

DS08110XQ004

SSK1

STAND SCREW KIT A3AU0UH(SEMS-SW PAN 1ESA34506 BLACK_NI + M4X12.0)

CARTON A4DU2UH

2EMC00401

STYROFOAM TOP A4GU5UH

2EMC00266

STYROFOAM BOTTOM A4GU5UH

2EMC00267

SET BAG A3AUCUH

2EMC00085

Part No.

SERIAL NO. LABEL A4GF1UT

----------

S10

PROTECTION CARTON A4GU5UH

2EMC00272

ACCESSORIES

NOTE: Parts that are not assigned part numbers (---------) are not available. Ref. No.

Description

POLYETHYLENE BAG HDPE 180X340XT0.03

X2#

OWNERS MANUAL A4D1BUH

1EM435579 2EMN00154

REMOTE CONTROL UNIT YKF340-003

URMT41JHG003

BATTERY DRY R03(SIZE AAA )

XB00M0RKT001

QUICK START GUIDE A4D17UH

2EMN00176

X22

WARNING MESSAGE FLIER A3AU2UH

2EMN00059A

LCD PANEL ASSEMBLY# Ref. No. LCD1#

Description

Part No.

LCD PANEL ASSEMBLY

U4AU0P0

LCD MODULE

----------

WX1A4GU5S302

2EMA00059

PACKING

2014/02/27

13-1

A4DU2CA.fm

Electrical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

POWER SUPPLY CBA

C602

CAP METALLIZED FILM 0.1µF/310V /K/LE-MX

CTA1040DC001

NOTES:

C604#

CAP METALLIZED FILM 0.1µF/310V /K/LE-MX

CTA1040DC001

C605

CAP ELE 33µF/400V/M/85

CEN3300V8007

C606

CERAMIC CAP. RB 220pF/2kV

CA3D221TE006

C607

CHIP CERAMIC CAP.(1608) B K 1000pF/50V

CHD1JK30B102

C608

CHIP CERAMIC CAP. CH J 150pF/50V

CHD1JJ3CH151

C610

CHIP CERAMIC CAP. B K 220pF/50V

CHD1JK30B221

C611

CHIP CERAMIC CAP.(1608) B K 0.1µF/50V

CHD1JK30B104

C612

CHIP CERAMIC CAP.(1608) B K 1000pF/50V

CHD1JK30B102

C614#

CAP METALLIZED FILM 1.0µF/310V /K/LE-MX

CTA1050DC001

C615

CAP ELE 47µF/50V/M/85

CEF4700V8006

C616

CAP ELE 220µF/35V/M/85

CEE2210V8006

C619#

CAP CERAMIC SAFETY 1000pF/250V E M KX

CJMR102M42E1

Ref. No.

2. Tolerance of Capacitors and Resistors are noted with the following symbols. D.....±0.5%

F.....±1%

G.....±2%

J......±5%

K.....±10%

M.....±20%

N.....±30%

Z.....+80/-20%

DIGITAL MAIN CBA UNIT Ref. No.

Description

Part No.

DIGITAL MAIN CBA UNIT

A4DU2MMA-001

WIRELESS LAN MODULE WM5504

UWLMDLACM002

IC3101

IC MAIN PH1-SLD8PLUS MN2WS0270HA

QSCA0R0MS065

IC3102

IC NAND FLASH 1GB H27U1G8F2BTR-BC

NSCA0R0HY009

IC3103

16KBIT EEPROM M24C16-WMN6TP

NSZBA0TSS259

IC3601

IC RESET IC-PST8429UR

QSCA0T0MM075

IC3602

IC DC-DC CONVERTER MP1472GJC452Z

NSCA0T09M021

IC3603

IC DC-DC CONVERTER MP1472GJC452Z

NSCA0T09M021

IC3604

IC DCDC CONVERTER RT8293ALZSP

NSCA0T00B017

IC3607

IC DC-DC CONVERTER MP1472GJC452Z

NSCA0T09M021

IC3701

IC USB HIGH-SIDE SW AP2151WG-7/SOT25/ 5PI

NSCA0TDES015

CN3701

IC3803

Part No. A4D1BMPW-001

CAPACITORS

1. Parts that are not assigned part numbers (---------) are not available.

C.....±0.25%

Description POWER SUPPLY CBA Consists fo the following

C620

CAP ELE 33µF/35V/M/85

CEE3300V8006

C621

CHIP CERAMIC CAP.(1608) B K 4700pF/50V

CHD1JK30B472

C622

CHIP CERAMIC CAP.(1608) B K 1000pF/50V

CHD1JK30B102

C624

CHIP CERAMIC CAP.(1608) B K 0.1µF/50V

CHD1JK30B104

C625

CHIP CERAMIC CAP.(1608) B K 1000pF/50V

CHD1JK30B102

C650

CAP CERAMIC HV 2200pF/1kV B K

CA3A222TE006

C651

CAP ELE 470µF/25V/M/85

CED4710V8006

C652

CAP ELE 470µF/25V/M/85

CED4710V8006

C654

CAP ELE 470µF/16V/M/85

CEC4710V8006

C655

CAP ELE 470µF/16V/M/85

CEC4710V8006

C656

CAP ELE 1µF/50V/M/85

CEF1R00V8006

C660

CHIP CERAMIC CAP.(1608) B K 0.1µF/50V

CHD1JK30B104

C665

CERAMIC CAP. RB 680pF/2kV

CA3D681TE006

C691

CHIP CERAMIC CAP.(1608) B K 0.01µF/50V

CHD1JK30B103

C692

CAP ELE 33µF/35V/M/85

CEE3300V8006

C721

CHIP CERAMIC CAP.(1608) B K 0.1µF/50V

CHD1JK30B104

C722

CHIP CERAMIC CAP.(1608) B K 0.1µF/50V

CHD1JK30B104

C723

CAP ELE 470µF/63V/M/85

CEG4710V8007 CEG4710V8007

IC D-CLASS AUDIO POWER AMPLIFI TPA3110D2PWPR

NSCA0T0TY073

IC3901

IC DC-DC CONVERTER MP1472GJC452Z

NSCA0T09M021

C724

CAP ELE 470µF/63V/M/85

TU3001

TUNER UNIT U9004UH

U9004UH

C725

CAP CERAMIC HV 2200pF/1kV B K

CA3A222TE006

When you replace one of the below ICs on this CBA, replace with the one that has the same part number. Do not mix ICs with different part number.

C726

CAP ELE 470µF/63V/M/85

CEG4710V8007

C728

CAP ELE 100µF/10V/M/85

CEB1010V8006

IC3401

IC 1GB DDR3 SDRAM K4B1G1646G-BCK0

NSCA0R0SM055

C729

CHIP CERAMIC CAP.(1608) B K 0.1µF/50V

CHD1JK30B104

IC3402

IC 2GB DDR3 SDRAM K4B2G1646Q-BCMA

NSCA0R0SM057

C1004

CHIP CERAMIC CAP.(3216) X7R K 1.0µF/100V

CA2A105MR080

C1101

CHIP CERAMIC CAP.(3216) X7R K 1.0µF/100V

CA2A105MR080

or IC3401

IC 1GB DDR3 SDRAM H5TQ1G63EFR-PBC

NSCA0R0HY039

C1102

CHIP CERAMIC CAP.(3216) X7R K 1.0µF/100V

CA2A105MR080

IC3402

IC 2GB DDR3 SDRAM H5TQ2G63FFR-PBC

NSCA0R0HY041

C1103

CAP ELE 100µF/63V/M/85

CEG1010V8006

C1105

CHIP CERAMIC CAP.(1608) B K 1µF/25V

CHD1EK30B105 CHD1EK30B224

or IC3402

IC 2GB DDR3 SDRAM NT5CB128M16FP-DI

NSCA0R0J2016

C1106

CHIP CERAMIC CAP.(1608) B K 0.22µF/25V

IC3401

IC 1GB DDR3 SDRAM NT5CB64M16FP-DH

NSCA0R0J2017

C1107

CHIP CERAMIC CAP.(1608) B K 0.047µF/25V

CHD1EK30B473

C1108

CHIP CERAMIC CAP. B K 560pF/50V

CHD1JK30B561

C1109

CHIP CERAMIC CAP.(1608) B K 1000pF/50V

CHD1JK30B102

C1110

CHIP CERAMIC CAP.(1608) B K 0.22µF/25V

CHD1EK30B224

C1112

CHIP CERAMIC CAP.(1608) B K 1µF/25V

CHD1EK30B105

C1113

CHIP CERAMIC CAP. B K 2200pF/50V

CHD1JK30B222 CA2A105MR080

MSW ASSEMBLY Ref. No.

IC4051

Description

Part No.

MSW ASSEMBLY Consists fo the following

A4D1BMSW-001

C1114

CHIP CERAMIC CAP.(3216) X7R K 1.0µF/100V

FUNCTION CBA UNIT

A4D1BMSW-001-FN

C1116

CHIP CERAMIC CAP.(3216) X7R K 1.0µF/100V

CA2A105MR080

IR SENSOR CBA UNIT

A4D1BMSW-001-IR

C1117

CAP ELE 100µF/100V/M/85

CEH1010V8007

O-E DEVICE LIGHT SENSOR BH1603FVCTR /WSOF6

QP2Z00BH1603

C1201

CHIP CERAMIC CAP.(3216) X7R K 1.0µF/100V

CA2A105MR080

C1202

CHIP CERAMIC CAP.(3216) X7R K 1.0µF/100V

CA2A105MR080

C1203

CAP ELE 100µF/63V/M/85

CEG1010V8006

C1205

CHIP CERAMIC CAP.(1608) B K 1µF/25V

CHD1EK30B105

2014/02/27

13-2

A4DU2EL.fm

Ref. No.

Description

Ref. No.

Part No.

Description

Part No.

C1206

CHIP CERAMIC CAP.(1608) B K 0.22µF/25V

CHD1EK30B224

D606

RECTIFIER DIODE 1N4005

NDWZ001N4005

C1207

CHIP CERAMIC CAP.(1608) B K 0.047µF/25V

CHD1EK30B473

D607

DIODE 1N5406BH

NDL1001N5406

C1208

CHIP CERAMIC CAP. B K 560pF/50V

CHD1JK30B561

D609A

DIODE SCHOTTKY SMD CES520.L3F(D

QD1Z00CES520

C1209

CHIP CERAMIC CAP.(1608) B K 1000pF/50V

CHD1JK30B102

D613

DIODE ZENER 1ZB36BB

NDWZ0001ZB36

C1210

CHIP CERAMIC CAP.(1608) B K 0.22µF/25V

CHD1EK30B224

D614

ZENER DIODE SMD TFZVTR27B

QD1B00TFZV27

C1212

CHIP CERAMIC CAP.(1608) B K 1µF/25V

CHD1EK30B105

D615

DIODE SWITCHING SMD 1SS400ST(SOD-523) ND1Z1SS400ST

C1213

CHIP CERAMIC CAP. B K 2200pF/50V

CHD1JK30B222

D617

RES CHIP 1608 1/10W 0 

C1214

CHIP CERAMIC CAP.(3216) X7R K 1.0µF/100V

CA2A105MR080

D618

ZENER DIODE SMD TFZVTR18B

QD1B00TFZV18

C1216

CHIP CERAMIC CAP.(3216) X7R K 1.0µF/100V

CA2A105MR080

D619A

DIODE FAST RECOVERY RS1GJTD

ND1Z0RS1GJTD

C1217

CAP ELE 100µF/100V/M/85

CEH1010V8007

D620A

DIODE FAST RECOVERY RS1GJTD

ND1Z0RS1GJTD

C1301

CHIP CERAMIC CAP.(3216) X7R K 1.0µF/100V

CA2A105MR080

D621A

DIODE FAST RECOVERY RS1GJTD

ND1Z0RS1GJTD

C1302

CHIP CERAMIC CAP.(3216) X7R K 1.0µF/100V

CA2A105MR080

D623

ZENER DIODE MM5Z5V6B

ND1BMM5Z5V6B

C1303

CAP ELE 100µF/63V/M/85

CEG1010V8006

D650

DIODE SHOTTKY SB3200BR

NDWZ3200D027

C1305

CHIP CERAMIC CAP.(1608) B K 1µF/25V

CHD1EK30B105

D653

DIODE SCHOTTKY SB3150BH

NDWZ00SB3150

C1306

CHIP CERAMIC CAP.(1608) B K 0.22µF/25V

CHD1EK30B224

D654

DIODE ZENER 1ZB20BB

NDWZ0001ZB20

C1307

CHIP CERAMIC CAP.(1608) B K 0.047µF/25V

CHD1EK30B473

D655

DIODE SCHOTTKY SB3150BH

NDWZ00SB3150

C1308

CHIP CERAMIC CAP. B K 560pF/50V

CHD1JK30B561

D656A

DIODE FAST RECOVERY RS1GJTD

ND1Z0RS1GJTD

C1309

CHIP CERAMIC CAP.(1608) B K 1000pF/50V

CHD1JK30B102

D657

ZENER DIODE MM5Z4V3B

ND1BMM5Z4V3B

C1310

CHIP CERAMIC CAP.(1608) B K 0.22µF/25V

CHD1EK30B224

D660

IC SHUNT REGULATOR SL431A-AT

NSZBA0TAUK01

C1312

CHIP CERAMIC CAP.(1608) B K 1µF/25V

CHD1EK30B105

D661

DIODE SWITCHING SMD 1SS400ST(SOD-523) ND1Z1SS400ST

C1313

CHIP CERAMIC CAP. B K 2200pF/50V

CHD1JK30B222

D662

DIODE SWITCHING SMD 1SS400ST(SOD-523) ND1Z1SS400ST

C1314

CHIP CERAMIC CAP.(3216) X7R K 1.0µF/100V

CA2A105MR080

D663

DIODE SWITCHING SMD 1SS400ST(SOD-523) ND1Z1SS400ST

C1316

CHIP CERAMIC CAP.(3216) X7R K 1.0µF/100V

CA2A105MR080

D664A

DIODE FAST RECOVERY RS1KJTD

C1317

CAP ELE 100µF/100V/M/85

CEH1010V8007

D704

IC SHUNT REGULATOR SL431A-AT

NSZBA0TAUK01

C1601

CHIP CERAMIC CAP. B K 8200pF/50V

CHD1JK30B822

D710

DIODE SHOTTKY SB3200BR

NDWZ3200D027

C1602

CAP ELE 4.7µF/50V/M/85

CEF4R70V8006

D711

DIODE SHOTTKY SB3200BR

NDWZ3200D027

C1603

CHIP CERAMIC CAP.(1608) B K 0.22µF/25V

CHD1EK30B224

D712

DIODE SHOTTKY SB3200BR

NDWZ3200D027

C1604

CHIP CERAMIC CAP.(1608) B K 2.2µF/10V

CHD1AK30B225

D715

IC SHUNT REGULATOR SL431A-AT

NSZBA0TAUK01

C1605

CHIP CERAMIC CAP. B K 1200pF/50V

CHD1JK30B122

D716

ZENER DIODE SMD TFZVTR4.7B

QD1B0TFZV4R7

C1606

CHIP CERAMIC CAP.(1608) B K 1000pF/50V

CHD1JK30B102

D1101

DIODE SCHOTTKY BARRIER SB2150BD

NDWZ00SB2150

C1607

CHIP CERAMIC CAP. B K 1200pF/50V

CHD1JK30B122

D1103

DIODE SWITCHING SMD 1SS400ST(SOD-523) ND1Z1SS400ST

RRXA000HH014

ND1Z0RS1KJTD

C1608

CHIP CERAMIC CAP.(1608) B K 1000pF/50V

CHD1JK30B102

D1104

ZENER DIODE SMD TFZVTR27B

C1609

CHIP CERAMIC CAP.(1608) CH J 22pF/50V

CHD1JJ3CH220

D1105

ZENER DIODE SMD TFZVTR27B

QD1B00TFZV27

C1610

CHIP CERAMIC CAP.(1608) CH J 22pF/50V

CHD1JJ3CH220

D1201

DIODE SCHOTTKY BARRIER SB2150BD

NDWZ00SB2150

C1611

CHIP CERAMIC CAP.(1608) B K 0.1µF/50V

CHD1JK30B104

D1203

DIODE SWITCHING SMD 1SS400ST(SOD-523) ND1Z1SS400ST

C1612#

CAP METALLIZED FILM 0.47µF/310V /K/LE-MX CTA4740DC001

D1204

ZENER DIODE SMD TFZVTR27B

C1613

CERAMIC CAP. RB 220pF/2kV

CA3D221TE006

D1205

ZENER DIODE SMD TFZVTR27B

QD1B00TFZV27

C1614

CERAMIC CAP. RB 220pF/2kV

CA3D221TE006

D1301

DIODE SCHOTTKY BARRIER SB2150BD

NDWZ00SB2150

C1618

CAP ELE 10µF/50V/M/85

CEF1000V8006

D1303

DIODE SWITCHING SMD 1SS400ST(SOD-523) ND1Z1SS400ST

C1621

CAP ELECTROLYTIC 100µF/400V/M/22/25

CA2H101DYG17

D1304

ZENER DIODE SMD TFZVTR27B

C1701

CHIP CERAMIC CAP.(1608) B K 1000pF/50V

CHD1JK30B102

D1305

ZENER DIODE SMD TFZVTR27B

QD1B00TFZV27

C1702

CHIP CERAMIC CAP. CH J 150pF/50V

CHD1JJ3CH151

D1603

DIODE FAST RECOVERY 30PFB60

QDWZ030PFB60

C1703

CHIP CERAMIC CAP. B K 220pF/50V

CHD1JK30B221

D1605

DIODE FAST RECOVERY 30PFB60

QDWZ030PFB60

C1704

CHIP CERAMIC CAP.(1608) B K 0.1µF/50V

CHD1JK30B104

D1608

ZENER DIODE SMD TFZVTR16B

QD1B00TFZV16

C1706

CERAMIC CAP. RB 470pF/2kV

CA3D471TE006

D1705A

DIODE SCHOTTKY SMD CES520.L3F(D

QD1Z00CES520

C1707#

CAP CERAMIC SAFETY 1000pF/250V E M KX

CJMR102M42E1

D1707

DIODE ZENER 1ZB36BB

NDWZ0001ZB36

C1708

CAP ELE 33µF/400V/M/85

CEN3300V8007

D1711

ZENER DIODE SMD TFZVTR27B

QD1B00TFZV27

C1709

CAP ELE 220µF/10V/M/85

CEB2210V8006

D1714A

DIODE FAST RECOVERY RS1KJTD

ND1Z0RS1KJTD

IC601

IC SWITCHING FA5640N-C6-TE3/SOP-8

QSCA0T0FD007

IC602#

O-E DEVICE PHOTO COUPLER TLP785F(D4FNBLLF(C

QPEL0TLP785F

IC604

IC SHUNT REGULATOR SL431A-AT

NSZBA0TAUK01

IC1101

IC LED BACKLIGHT CONTROLLER HA7223PE/SOP/16P

NSCA0T00H007

IC1201

IC LED BACKLIGHT CONTROLLER HA7223PE/SOP/16P

NSCA0T00H007

IC1301

IC LED BACKLIGHT CONTROLLER HA7223PE/SOP/16P

NSCA0T00H007

IC1601

IC DUAL-PHASE PFC CONTROLLER UCC28063DR/R-PDSO-G

NSCA0T0TY087

IC1602#

O-E DEVICE PHOTO COUPLER TLP785F(D4FNBLLF(C

QPEL0TLP785F

IC1701

IC SWITCHING FA5640N-C6-TE3/SOP-8

QSCA0T0FD007

C1710

CHIP CERAMIC CAP.(1608) B K 1000pF/50V

CHD1JK30B102

C1726

CERAMIC CAP RB 1500pF/2kV

CA3D152TE006

FFC CONNECTOR IMSA-9615S-23A-PP-A

JC96J23ER007

CN601#

CONNECTOR B2P3-VH(LF)(SN)

J3VH020JG001

CN1101

PH CONNECTOR TOP 4P B4B-PH-K-S (LF)(SN)

J3PHC04JG029

CN1301

PH CONNECTOR TOP 2P B2B-PH-K-S (LF)(SN)

J3PHC02JG029

DIODES D601#

DIODE 1N5406BH

NDL1001N5406

D602#

DIODE 1N5406BH

NDL1001N5406

D603#

DIODE 1N5406BH

NDL1001N5406

D604#

DIODE 1N5406BH

NDL1001N5406

D605

RECTIFIER DIODE 1N4005

NDWZ001N4005

2014/02/27

QD1B00TFZV27

ICS

CONNECTORS CN501

QD1B00TFZV27

13-3

A4DU2EL.fm

Ref. No. IC1702#

Description O-E DEVICE PHOTO COUPLER TLP785F(D4FNBLLF(C

Part No.

Ref. No.

QPEL0TLP785F

R633

COILS

Description

Part No.

RES CHIP 1608 1/10W J 1.2k

RRXA122HH013

R634

RES CHIP 1608 1/10W J 270

RRXA271HH013

R635

RES CHIP 1608 1/10W J 1.2k

RRXA122HH013 RRXA1R0HH013

L601#

LINE FILTER JLB24137

LLEG0Z0XB033

R651

RES CHIP 1608 1/10W J 1.0

L602#

LINE FILTER JLB24137

LLEG0Z0XB033

R652

RES CHIP 1608 1/10W J 10k

RRXA103HH013

L1101

COIL POWER INDUCTORS DIP RP1315BNP101M/100µHµH

LLF1010SF013

R653

RES CHIP 1608 1/10W F 22.0k

RTW2202HH008

L1102

COIL CHIP BEADS PZ2012D121-2R5T(F)

LLF121SSN006

R654

RES CHIP 3216 1/4W J 180

RRX4181HH034

R655

RES CHIP 3216 1/4W J 180

RRX4181HH034

R656

RES CHIP 1608 1/10W J 8.2k

RRXA822HH013

L1201

COIL POWER INDUCTORS DIP RP1315BNP101M/100µH

LLF1010SF013

L1202

COIL CHIP BEADS PZ2012D121-2R5T(F)

LLF121SSN006

R657

RES CHIP 3216 1/4W J 3.9k

RRX4392HH034

L1301

COIL POWER INDUCTORS DIP RP1315BNP101M/100µH

LLF1010SF013

R658

RES CHIP 1608 1/10W J 2.7k

RRXA272HH013

R659

RES CHIP 1608 1/10W F 27.0k

RTW2702HH008

COIL CHIP BEADS PZ2012D121-2R5T(F)

LLF121SSN006

R660

RES CHIP 1608 1/10W F 3.90k

RTW3901HH008

R661

RES CHIP 1608 1/10W F 3.30k

RTW3301HH008

L1302

TRANSISTORS Q601

MOS-FET 3.5A/600V TK4P60DA(T6RSS-Q)

QF2ZTK4P60DA

R662

RES CHIP 1608 1/10W J 47k

RRXA473HH013

Q602

FET MOS TK3P50D RQ(S

QF2Z0TK3P50D

R667

RES CHIP 1608 1/10W J 8.2k

RRXA822HH013

Q603

CHIP TRANSISTOR KTC3875S-Y-RTK/P

NQ1YKTC3875S

R668

RES CHIP 1608 1/10W J 47k

RRXA473HH013

Q650

CHIP TRANSISTOR KTC3875S-Y-RTK/P

NQ1YKTC3875S

R669

RES CHIP 1608 1/10W J 10k

RRXA103HH013

Q653

CHIP TRANSISTOR KTC3875S-Y-RTK/P

NQ1YKTC3875S

R674

RES CHIP 1608 1/10W 0

RRXA000HH014

Q654

CHIP TRANSISTOR KTC3875S-Y-RTK/P

NQ1YKTC3875S

R675

RES CHIP 1608 1/10W F 68.0k

RTW6802HH008

Q691

CHIP TRANSISTOR KTC3875S-Y-RTK/P

NQ1YKTC3875S

R691

RES CHIP 1608 1/10W J 2.2k

RRXA222HH013

Q701

CHIP TRANSISTOR KTC3875S-Y-RTK/P

NQ1YKTC3875S

R692

RES CHIP 1608 1/10W J 330

RRXA331HH013

Q702

CHIP TRANSISTOR KTC3875S-Y-RTK/P

NQ1YKTC3875S

R693

RES CHIP 1608 1/10W J 47k

RRXA473HH013

Q703

CHIP TRANSISTOR KTC3875S-Y-RTK/P

NQ1YKTC3875S

R701

RES CHIP 1608 1/10W J 10k

RRXA103HH013

Q705

TRANSISTOR 2SA1201-Y

QQ1Y2SA1201C

R702

RES CHIP 1608 1/10W J 47k

RRXA473HH013

Q1101

FET MOS SMD AP05N20GH-HF

NF2ZP05N20GH

R703

RES CHIP 1608 1/10W J 10k

RRXA103HH013

Q1103

FET MOS SMD AP18T10AGH-HF

NF2Z18T10AGH

R704

RES CHIP 1608 1/10W J 47k

RRXA473HH013

Q1201

FET MOS SMD AP05N20GH-HF

NF2ZP05N20GH

R738

RES CHIP 3216 1/4W J 330

RRX4331HH034

Q1203

FET MOS SMD AP18T10AGH-HF

NF2Z18T10AGH

R739

RES CHIP 3216 1/4W J 15k

RRX4153HH034

Q1301

FET MOS SMD AP05N20GH-HF

NF2ZP05N20GH

R740

RES CHIP 1608 1/10W J 2.7k

RRXA272HH013

Q1303

FET MOS SMD AP18T10AGH-HF

NF2Z18T10AGH

R741

RES CHIP 3216 1/4W J 3.9k

RRX4392HH034

Q1601

FET MOS TK7P60W.RVQ(S

QF2Z0TK7P60W

R743

RES CHIP 1608 1/10W F 51.0k

RTW5102HH008

Q1602

FET MOS TK7P60W.RVQ(S

QF2Z0TK7P60W

R744

RES CHIP 1608 1/10W F 9.10k

RTW9101HH008

Q1604

NPN TRANSISTOR SMD 2SC5344SY

NQZY2SC5344S

R745

RES CHIP 1608 1/10W F 3.30k

RTW3301HH008

Q1607

PNP TRANSISTOR SMD 2SA1576UBTLQ

QQ1Q2SA1576U

R748

RES CHIP 1608 1/10W F 3.30k

RTW3301HH008

Q1701

CHIP TRANSISTOR KTC3875S-Y-RTK/P

NQ1YKTC3875S

R749

RES CHIP 1608 1/10W J 270

RRXA271HH013

Q1702

PNP TRANSISTOR SMD 2SA1576UBTLQ

QQ1Q2SA1576U

R750

RES CHIP 1608 1/10W J 270

RRXA271HH013

Q1704

FET MOS TK5A65D(STA4 A Q)

QFEZTK5A65DQ

R751

RES CHIP 1608 1/10W J 270

RRXA271HH013

R753

RES CHIP 1608 1/10W J 100

RRXA101HH013 RTW1002HH008

RESISTORS R601#

RES. CARBON FILM J 1/2W J 1.2M W

RCX2125T1003

R754

RES CHIP 1608 1/10W F 10.0k

R604

RES CHIP 1608 1/10W F 2.70k

RTW2701HH008

R755

RES CHIP 1608 1/10W 0

RRXA000HH014

R605

RES CHIP 1608 1/10W J 270

RRXA271HH013

R756

RES CHIP 1608 1/10W J 1.5

RRXA1R5HH013 RTW7502HH008

R606

RES CHIP 1608 1/10W J 22k

RRXA223HH013

R1101

RES CHIP 1608 1/10W F 75.0k

R607

RES CHIP 1608 1/10W J 4.7k

RRXA472HH013

R1102

RES CHIP 1608 1/10W F 20.0k

RTW2002HH008

R608

RES CHIP 1608 1/10W J 22

RRXA220HH013

R1103

RES CHIP 1608 1/10W F 20.0k

RTW2002HH008

R609

RES CHIP 1608 1/10W J 820k

RRXA824HH013

R1104

RES CHIP 1608 1/10W J 75

RRXA750HH013

R610

RES CHIP 3216 1/4W J 15k

RRX4153HH034

R1105

RES CHIP 1608 1/10W J 75

RRXA750HH013

R611

RES CHIP 3216 1/4W J 15k

RRX4153HH034

R1106

RES CHIP 1608 1/10W J 10k

RRXA103HH013

R614

RES CHIP 3216 1/4W J 15k

RRX4153HH034

R1107

RES CHIP 1608 1/10W J 100k

RRXA104HH013

R617

RES CHIP 3216 1/4W J 4.7k

RRX4472HH034

R1108

RES CHIP 1608 1/10W J 10k

RRXA103HH013

R618

METAL OXIDE FILM RES. 2W J 0.22

RN02R22ZU001

R1109

RES CHIP 1608 1/10W J 100k

RRXA104HH013

R619

RES CHIP 1608 1/10W J 4.7

RRXA4R7HH013

R1110

RES CHIP 1608 1/10W F 36.0k

RTW3602HH008

R620

RES CHIP 1608 1/10W J 47k

RRXA473HH013

R1111

RES CHIP 1608 1/10W F 24.0k

RTW2402HH008 RTW2201HH008

R623

RES CHIP 1608 1/10W F 1.80k

RTW1801HH008

R1112

RES CHIP 1608 1/10W F 2.20k

R624

RES CHIP 3216 1/4W F 510k

RTC5103YF004

R1113

RES CHIP 1608 1/10W J 10

RRXA100HH013

R625

RES CHIP 3216 1/4W F 510k

RTC5103YF004

R1115

METALOXIDE RES 1W J 0.12

RNJR12PAK001

R626

RES CHIP 3216 1/4W F 510k

RTC5103YF004

R1118

RES CHIP 1608 1/10W J 200

RRXA201HH013

R627

RES CHIP 1608 1/10W F 36.0k

RTW3602HH008

R1119

RES CHIP 1608 1/10W F 62.0k

RTW6202HH008

R628

RES CHIP 1608 1/10W J 22k

RRXA223HH013

R1120

RES CHIP 1608 1/10W J 120

RRXA121HH013

R629

RES CHIP 1608 1/10W J 47k

RRXA473HH013

R1121

RES CHIP 1608 1/10W J 51

RRXA510HH013

R630

RES CHIP 3216 1/4W J 560k

RRX4564HH034

R1123

RES CHIP 1608 1/10W J 5.6k

RRXA562HH013

R631

RES CHIP 3216 1/4W J 560k

RRX4564HH034

R1124

RES CHIP 1608 1/10W J 5.6k

RRXA562HH013

R632

RES CHIP 1608 1/10W J 1.2k

RRXA122HH013

R1125

RES CHIP 1608 1/10W F 360k

RTW3603HH008

2014/02/27

13-4

A4DU2EL.fm

Ref. No. R1126

Description

Ref. No.

Part No.

Description

Part No.

RES CHIP 1608 1/10W F 240k

RTW2403HH008

R1601

RES CHIP 3216 1/4W F 750k

RTC7503YF004

R1127

RES CHIP 1608 1/10W F 20.0k

RTW2002HH008

R1602

RES CHIP 3216 1/4W F 750k

RTC7503YF004

R1128

RES CHIP 1608 1/10W J 1.0k

RRXA102HH013

R1604

RES CHIP 3216 1/4W F 750k

RTC7503YF004

R1129

RES CHIP 3216 1/4W F 0.62

RTR620RYL007

R1605

RES CHIP 3216 1/4W F 750k

RTC7503YF004

R1130

RES CHIP 3216 1/4W F 0.56

RTR560RYL007

R1606

RES CHIP 1608 1/10W J 120k

RRXA124HH013

R1131

RES CHIP 3216 1/4W F 0.56

RTR560RYL007

R1607

RES CHIP 1608 1/10W F 220

RTW2200HH008

R1132

RES CHIP 3216 1/4W 0

RRX4000HH036

R1608

RES CHIP 1608 1/10W F 51.0k

RTW5102HH008

R1201

RES CHIP 1608 1/10W F 75.0k

RTW7502HH008

R1609

RES CHIP 1608 1/10W J 5.6k

RRXA562HH013

R1202

RES CHIP 1608 1/10W F 20.0k

RTW2002HH008

R1610

RES CHIP 1608 1/10W F 18.0k

RTW1802HH008

R1203

RES CHIP 1608 1/10W F 20.0k

RTW2002HH008

R1611

RES CHIP 1608 1/10W J 100

RRXA101HH013

R1204

RES CHIP 1608 1/10W J 75

RRXA750HH013

R1612

RES CHIP 3216 1/4W F 750k

RTC7503YF004

R1205

RES CHIP 1608 1/10W J 75

RRXA750HH013

R1613

RES CHIP 3216 1/4W F 750k

RTC7503YF004

R1206

RES CHIP 1608 1/10W J 10k

RRXA103HH013

R1614

RES CHIP 3216 1/4W F 750k

RTC7503YF004

R1207

RES CHIP 1608 1/10W J 100k

RRXA104HH013

R1615

RES CHIP 3216 1/4W F 750k

RTC7503YF004

R1208

RES CHIP 1608 1/10W J 10k

RRXA103HH013

R1616

RES CHIP 1608 1/10W F 47.0k

RTW4702HH008

R1209

RES CHIP 1608 1/10W J 100k

RRXA104HH013

R1617

RES CHIP 3216 1/4W F 750k

RTC7503YF004

R1210

RES CHIP 1608 1/10W F 36.0k

RTW3602HH008

R1618

RES CHIP 3216 1/4W F 750k

RTC7503YF004

R1211

RES CHIP 1608 1/10W F 24.0k

RTW2402HH008

R1619

RES CHIP 3216 1/4W F 750k

RTC7503YF004

R1212

RES CHIP 1608 1/10W F 2.20k

RTW2201HH008

R1620

RES CHIP 3216 1/4W F 750k

RTC7503YF004

R1213

RES CHIP 1608 1/10W J 10

RRXA100HH013

R1621

RES CHIP 1608 1/10W F 1.80k

RTW1801HH008

R1215

METALOXIDE RES 1W J 0.12

RNJR12PAK001

R1622

RES CHIP 1608 1/10W J 18k

RRXA183HH013

R1218

RES CHIP 1608 1/10W J 200

RRXA201HH013

R1623

RES CHIP 1608 1/10W J 12k

RRXA123HH013

R1219

RES CHIP 1608 1/10W F 62.0k

RTW6202HH008

R1624

RES CEMENT 5W J 0.033

RWJL33PAK002

R1220

RES CHIP 1608 1/10W J 120

RRXA121HH013

R1625

RES CHIP 3216 1/4W J 47

RRX4470HH034

R1221

RES CHIP 1608 1/10W J 51

RRXA510HH013

R1626

RES CHIP 3216 1/4W J 47

RRX4470HH034

R1223

RES CHIP 1608 1/10W J 5.6k

RRXA562HH013

R1627

RES CHIP 1608 1/10W J 12k

RRXA123HH013

R1224

RES CHIP 1608 1/10W J 5.6k

RRXA562HH013

R1633

RES CHIP 3216 1/4W J 2.7k

RRX4272HH034

R1225

RES CHIP 1608 1/10W F 360k

RTW3603HH008

R1634

RES CHIP 3216 1/4W J 47

RRX4470HH034

R1226

RES CHIP 1608 1/10W F 240k

RTW2403HH008

R1637

RES CHIP 3216 1/4W J 180

RRX4181HH034

R1227

RES CHIP 1608 1/10W F 20.0k

RTW2002HH008

R1638

RES CHIP 1608 1/10W J 18k

RRXA183HH013

R1228

RES CHIP 1608 1/10W J 1.0k

RRXA102HH013

R1639

RES CHIP 1608 1/10W J 10k

RRXA103HH013

R1229

RES CHIP 3216 1/4W F 0.62

RTR620RYL007

R1645

RES CHIP 1608 1/10W F 68.0k

RTW6802HH008

R1230

RES CHIP 3216 1/4W F 0.56

RTR560RYL007

R1653

RES CHIP 1608 1/10W J 68

RRXA680HH013

R1231

RES CHIP 3216 1/4W F 0.56

RTR560RYL007

R1656

RES CHIP 1608 1/10W J 4.7

RRXA4R7HH013

R1232

RES CHIP 3216 1/4W 0

RRX4000HH036

R1657

RES CHIP 3216 1/4W J 2.7k

RRX4272HH034

R1301

RES CHIP 1608 1/10W F 75.0k

RTW7502HH008

R1702

RES CHIP 1608 1/10W F 2.70k

RTW2701HH008

R1302

RES CHIP 1608 1/10W F 20.0k

RTW2002HH008

R1703

RES CHIP 1608 1/10W J 4.7k

RRXA472HH013

R1303

RES CHIP 1608 1/10W F 20.0k

RTW2002HH008

R1704

RES CHIP 1608 1/10W J 22k

RRXA223HH013

R1304

RES CHIP 1608 1/10W J 75

RRXA750HH013

R1705

RES CHIP 1608 1/10W J 27k

RRXA273HH013

R1305

RES CHIP 1608 1/10W J 75

RRXA750HH013

R1707

RES CHIP 1608 1/10W J 820k

RRXA824HH013

R1306

RES CHIP 1608 1/10W J 10k

RRXA103HH013

R1708

RES CHIP 1608 1/10W J 22k

RRXA223HH013

R1307

RES CHIP 1608 1/10W J 100k

RRXA104HH013

R1710

RES CHIP 1608 1/10W J 22k

RRXA223HH013

R1308

RES CHIP 1608 1/10W J 10k

RRXA103HH013

R1711

RES CHIP 1608 1/10W J 10k

RRXA103HH013

R1309

RES CHIP 1608 1/10W J 100k

RRXA104HH013

R1712

RES CHIP 1608 1/10W J 180

RRXA181HH013

R1310

RES CHIP 1608 1/10W F 36.0k

RTW3602HH008

R1714

RES CHIP 1608 1/10W J 22

RRXA220HH013

R1311

RES CHIP 1608 1/10W F 24.0k

RTW2402HH008

R1718

RES CHIP 3216 1/4W J 22k

RRX4223HH034

R1312

RES CHIP 1608 1/10W F 2.20k

RTW2201HH008

R1719

METALOXIDE RES 2W J 0.12

RNJR12PAK002

R1313

RES CHIP 1608 1/10W J 10

RRXA100HH013

R1720

RES CHIP 1608 1/10W J 270

RRXA271HH013

R1315

METALOXIDE RES 1W J 0.12

RNJR12PAK001

R1746

RES CHIP 3216 1/4W J 270k

RRX4274HH034

R1318

RES CHIP 1608 1/10W J 200

RRXA201HH013

R1747

RES CHIP 3216 1/4W J 270k

RRX4274HH034

R1319

RES CHIP 1608 1/10W F 62.0k

RTW6202HH008

R1320

RES CHIP 1608 1/10W J 120

RRXA121HH013

B19

POW HEAT SINK A7120UH

1EM423993A

R1321

RES CHIP 1608 1/10W J 51

RRXA510HH013

BC602

BEAD INDUCTORS B29 RID 2.3X7.5X7.5T

LLEF0S0XM002

R1323

RES CHIP 1608 1/10W J 5.6k

RRXA562HH013

BC1601

WIRE CP STP-S-0.50

XZ40F0REN001

R1324

RES CHIP 1608 1/10W J 5.6k

RRXA562HH013

BC1602

WIRE CP STP-S-0.50

XZ40F0REN001

R1325

RES CHIP 1608 1/10W F 360k

RTW3603HH008

BC1703

BEAD INDUCTORS B29 RID 2.3X7.5X7.5T

LLEF0S0XM002 PDGSLB0NG252

MISCELLANEOUS

R1326

RES CHIP 1608 1/10W F 240k

RTW2403HH008

F602#

FUSE TIME RAG SLT250V2.5A

R1327

RES CHIP 1608 1/10W F 20.0k

RTW2002HH008

L35

SCREW BIND 3CHROM +B-TITE M3X8.0 D3X8 GBJB3080 BIND HEAD+

R1328

RES CHIP 1608 1/10W J 1.0k

RRXA102HH013

R1329

RES CHIP 3216 1/4W F 0.62

RTR620RYL007

SA601#

VARISTOR 10D 471K SVR

R1330

RES CHIP 3216 1/4W F 0.56

RTR560RYL007

T601#

TRANS POWER BCK-28IS

LTT2PCMEK071

R1331

RES CHIP 3216 1/4W F 0.56

RTR560RYL007

T1601#

COIL EF TE2520A7001

LLEE0ZMEK005

R1332

RES CHIP 3216 1/4W 0

RRX4000HH036

T1602#

COIL EF TE2520A7001

LLEE0ZMEK005

2014/02/27

13-5

NVQZVR10D471

A4DU2EL.fm

Ref. No. T1701#

Description TRANS POWER BCK-35DH

2014/02/27

Part No. LTT3PCMEK031

13-6

A4DU2EL.fm

REVISION HISTORY

Chassis PL14.24 â&#x20AC;¢ 2014/03/06

50PFL4909/F7 (Serial No.: DS1) First draft added

14-1

PL14.24REV

COMPARISON LIST OF MODEL NAMES

Chassis PL14.24 50PFL4909/F7

(DS1)

A4DU2UH

PL14.24COM