Toshiba 32w153xdx 32l153xdx 40l153xdx 32w154xdx 32l154xdx e 40l154xdx by Portal da Eletrônica

FILE NO. 050-2015003

SERVICE MANUAL

LCD Color Television

32W153xDx 32L153xDx 40L153xDx 32W154xDx 32L154xDx 40L154xDx

(System Information)

CONTENTS

1. IMPORTANT NOTICE 2. GREEN PRODUCT PROCUREMENT 3. LEAD-FREE SOLDER 4. SAFETY INSTRUCTION 5. FIRMWARE UPDATING 6. HOTEL MODE / HOTEL CLONE 7. BLOCK DIAGRAM 8. SCHEMATIC DIAGRAM 9. TROUBLESHOOTING

IMPORTANT NOTICE WARNING: You are requested that you shall not modify or alter the information or data provided herein without prior written consent by Toshiba. Toshiba shall not be liable to anybody for any damages, losses, expenses or costs, if any, incurred in connection with or as a result of such modification or alteration. THE INFORMATION OR DATA HEREIN SHALL BE PROVIDED "AS IS" WITHOUT ANY WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Toshiba shall not be liable for any damages, losses, expenses or costs, if any, incurred in connection with or as a result of use of any information or data provided herein.

GREEN PRODUCT PROCUREMENT The EC is actively promoting the WEEE & RoHS Directives that define standards for recycling and reuse of Waste Electrical and Electronic Equipment and for the Restriction of the use of certain Hazardous Substances. From July 1, 2006, the RoHS Directive will prohibit any marketing of new products containing the restricted substances. Increasing attention is given to issues related to the global environmental. Toshiba Corporation recognizes environmental protection as a key management tasks, and is doing its utmost to enhance and improve the quality and scope of its environmental activities. In line with this, Toshiba proactively promotes Green Procurement, and seeks to purchase and use products, parts and materials that have low environmental impacts. Green procurement of parts is not only confined to manufacture. The same green parts used in manufacture must also be used as replacement parts.

LEAD-FREE SOLDER This product is manufactured using lead-free solder as a part of a movement within the consumer products industry at large to be environmentally responsible. Lead-free solder must be used in the servicing and repair of this product. WARNING: This product is manufactured using lead free solder. DO NOT USE LEAD BASED SOLDER TO REPAIR THIS PRODUCT! The melting temperature of lead-free solder is higher than that of leaded solder by 30ยบC to 40ยบC (54ยบF to 72ยบF). Use of a soldering iron designed for lead-based solders to repair product made with lead-free solder may result in damage to the component and or PCB being soldered. Great care should be made to ensure high-quality soldering when servicing this product especially when soldering large components, through-hole pins, and on PCBs as the level of heat required to melt lead-free solder is high.

(1 / 3)

SAFETY INSTRUCTION WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" INSTRUCTIONS BELOW.

Safety Precaution WARNING: SERVICING SHOULD NOT BE ATTEMPTED BY ANYONE UNFAMILIAR WITH THE NECESSARY PRECAUTIONS ON THIS RECEIVER. THE FOLLOWING ARE THE NECESSARY PRECAUTIONS TO BE OBSERVED BEFORE SERVICING THIS CHASSIS.

1. An isolation transformer should be connected in the power line between the receiver and the AC line before any service is performed on the receiver. 2. Always disconnect the power plug before any disassembling of the product. It may result in electrical shock. 3. When replacing a chassis in the cabinet, always be certain that all the protective devices are put back in place, such as nonmetallic control knobs, insulating covers, shields, isolation resistor-capacitor network, etc. 4. Always keep tools, components of the product, etc away from the children, These items may cause injury to children. 5. Depending on the model, use an isolation transformer or wear suitable gloves when servicing with the power on, and disconnect the power plug to avoid electrical shock when replacing parts. In some cases, alternating current is also impressed in the chassis, so electrical shock is possible if the chassis is contacted with the power on. 6. Always use the replacement parts specified for the particular model when making repairs. The parts used in products require special safety characteristics such as inflammability, voltage resistance, etc. therefore, use only replacement parts that have these same characteristics. Use only the specified parts when the in the circuit diagram or parts list.

mark is indicated

7. Parts mounting and routing dressing of wirings should be the same as that used originally. For safety purposes, insulating materials such as isolation tube or tape are sometimes used and printed circuit boards are sometimes mounted floating. Also make sure that wirings is routed and clamped to avoid parts that generate heat and which use high voltage. Always follow the manufactured wiring routes / dressings.

(2 / 3)

8. Always ensure that all internal wirings are in accordance before re-assembling the external casing after a repairing completed. Do not allow internal wiring to be pinched by cabinets, panels, etc. Any error in reassembly or wiring can result in electrical leakage, flame, etc., and may be hazardous. 9. NEVER remodel the product in any way. Remodeling can result in improper operation, malfunction, or electrical leakage and flame, which may be hazardous. 10. Touch current check. (After completing the work, measure touch current to prevent an electric shock.)  Plug the AC cord directly into the AC outlet. Do NOT use an isolation transformer for

this check.  Connect a measuring network for touch currents between each exposed metallic part on the set and a good earth ground such as a water pipe. Annex D (normative) Measuring network for TOUCH CURRENTS

Resistance values in orms (Ω). V: Voltmeter or oscilloscope (r.m.s. or peak reading) Input resistance : 1 MΩ Input capacitance : 200 pF Frequency range : 15 Hz to 1 MHz and d.c. respectively Note: Appropriate measures should be taken to obtain the correct value in case of non

(3 / 3)

sinusoidal waveforms. The measuring instrument is calibrated by comparing the frequency factor of with the solid line in figure F.2 of IEC 60990 at various frequencies. A calibration curve is constructed showing the deviation of frequency. TOUCH CURRENT =

from the ideal curve as a function of

/ 500 (peak value).

ď&#x201A;ˇ The potential at any point (TOUCH CURRENT) expressed as voltage

and

does

not exceed the following value: The part or contact of a TERMINAL is not HAZARDOUS LIVE if: a) The open-circuit voltage should not exceed 35 V (peak) a.c. or 60 V d.c. or, if a) is not met. b) The measurement of the TOUCH CURRENT shall be carried out in accordance with IEC 60990, with the measuring network described in Annex D of this standard. The TOUCH CURRENT expressed as voltages following values: - for a.c. : - for d.c. :

= 35 V (peak) and = 1.0 V

and

, does not exceed the

= 0.35 V (peak);

Note: The limit values of = 0.35 V (peak) for a.c. and to the values 0.7 mA (peak) a.c. and 2.0 mA d.c.

= 1.0 V for d.c. correspond

FIRMWARE UPDATING PROCEDURE SW update via USB 17MB8X Core Software Update 1. Please copy the file to USB device. There is no need to use any specific folder. •

upgrade_loader.pkg

2. Turn power to OFF by mechanical switch or removing AC plug and plug the USB to TV. 3. Keep pressing and holding “OK” key from Toshiba remote controller and at the same time turn power to ON by mechanical SW and hold OK pressed until the standby led blinks very rapidly. 4. SW update starts automatically when the led starts blinking. 5. SW update is completed after led blink is done.

* After core update, user/profile settings and panel files do not change. * After Core update, bootloader/mboot version will be updated. * SW version can be controlled from other settings or service menu.

HOTEL MODE/HOTEL CLONE HOTEL TV MENU: To enter hotel menu, please open main menu by pressing MENU(M) button. When you code following password “7935”, hidden hotel TV menu appears.

Figure 1 Hotel TV Menu

Hotel Mode Setting “Hotel Mode” item 'On' activates hotel mode. In other words user can do only what he/she is allowed to do. Restriction level can be determined by using other items on menu namely Volume Limit, Panel Button, OSD Disable. In hotel mode, users can not reach channel table and install menu so they could not change any program information.

Last Status Setting “Last Status” item to 'On' enable TV open with the closing status. Otherwise, if “Last Status” item is set 'Off' TV opens with standby status.

Panel Lock Enables (Panel Lock = Off) or prohibits (Panel Lock = On) the use of front panel buttons.

RCU Inhibit If OFF is selected TV will go on normal operation. If It is ON RCU will not function in anymenu(including nomenu) except this menu. To turn this option OFF later, “hotel tv menu shortcut” (MENU(M)-7-9-3-5) can be used to pop up this menu. RCU will function in Stand-By mode regardless of the state of this option.

Startup Position Specifies the starting channel when TV is switched ON. May take one of following values:

 AUTO o

TV is opened using standby key or digit keys: Last channel or last external source when TV is turned off

TV is opened using standby key or digits keys: TV channel number that is specified on field Startup Channel

 TV

 Other external sources (EXT1, HDMI2, PC, FAV, SVHS etc.) o

TV is opened using standby key or digit keys: Specified external source

Startup Channel Specifies the starting TV channel’s ID which will be tuned when startup position is TV.

Volume Limit Sets the maximum value the volume can have. “Volume Limit” can take values between 0-63.

Fixed Volume Enable Enables (Fixed Volume Enable = On) or prohibits (Fixed Volume Enable = Off) the use of fixed volume value which is set by menu item “Fixed Volume Value”. If Fixed Volume Enable is ON, volume cannot be set to a value other than the Fixed Volume Value. Fixed Volume Value Sets the fixed value the volume can have. If Fixed Volume Limit is ON, volume is set with the value here. Headphone Direct Volume Enables the remote controller volume +/- buttons to change the headphone volume directly. When this feauters is active, volume +/- buttons changes only headphone value,and to change the tv main sound it can be control from sound osd dialog only.

Figure 2 Headphone volume slider dialog

OSD Disable Disables either only INSTALL menu or all menus, both in analog and digital (IDTV) mode.

All Menus : All menus (MAIN, SOUND, PICTURE, SETTINGS, INSTALLATION) OSD Disable = Disable Setup Menus

are invisible.

: Only SETUP menus are invisible.

Invisible Setup Menus are: Main menu: Installation, Channel list Settings menu: Parental, Sources, Other settings

Teletext Enables (Teletext = On) or prohibits (Teletext = Off) the use of teletext (or MHEG if available)

WakeUp Time Channel Wakeup time alarm is activated if the time of last played service is same to selected time but if this entry is chosen an available service then only that service’s time information will be used. If default behaviour (first one) is requested then keep the value as “0”.

Wakeup Time Volume To modify the volume of tv wake up volume ( It cant be set higher volume than volume limit).

Copy To USB There are two steps and both are independent from each other. For welcome image downloading to USB, there should be DownloadWelcomeScreen.mb82 file in USB ROOT. Copy the updated welcome image to USB in directory “welcome_image” as “hotel_wel.png” Copy NVRAM data (service list, preferences, etc.) to USB device. On Phonix platform, all nvram data is stored in 8x32KB Flash files named as “nvblock_ ... .bin”. When Copy to USB is called, those files are copied from TV to USB. Then they can be used for various purposes testing on another TV or testing/debugging on observatory etc. Note that USB should be plugged before this operation. A new folder will be created in the USB with every operation of “Copy To USB”. Folder names will automatically increase like CLONE00001, CLONE00002, etc. (up to 99999)

Copy From USB Firstly, you will see the directory list of your USB if it is connected. All operations will start after you select one of this folders. The selected folder could also be the root folder. For Copy-From-USB operation, there are two steps and both are independent from each other. If there is file named “hotel_wel.png” in the folder “welcome_image” in the USB directory you selected, it is copied to tv to use as welcome image. The selected directory can be the root or the one created by user in the USB.

Copy from USB device data to NVRAM: Just the reverse operation done by copy to USB call. Previously copied nvram files (“nvblock_ ... .bin”) are copied into TV. If there is no flash file or some of them are available on USB, the available ones are copied. If no USB is connected, nothing happens. The files could be in a folder in the USB or it could be just in the root. TV will autamtically reset after the files are copied from USB to TV. It is required because of existing power-off requirement. •

Note : For Clone function USB stick (Copy to USB – Copy from USB) must be formatted to FAT32. If USB is not formatted to FAT32 the other TVs will not accept cloned data and performance issues will result

USB Option If this option is set as “ON”, TV will go on normal operation. If it is set as “5V”, TV can not use USB and MediaBrowser but USB port will have a voltage of 5 Volts and any device plugged can be charged. HOTEL MODE should be enabled for “5V” feature. It is set as “OFF”, then USB ports will be disabled and power will be cut on USB ports. To be able to use this feature, -

“USBPowerOff” option has to be set as enabled from profile (hwprofile > USBPorts/USBPowerOff). OR

HOTEL MODE should be enabled.

Fixed Pic. Mode If OFF is selected TV will go on normal operation. If It is ON Main menu/Picture quick menu/mode and quick menu/picture zoom will be inaccessible. Digital Tuner If ON is selected TV will go on normal operation. If It is OFF TV will display “no signal” message when tuned to digital channels existing in active channel list, and digital channels will not be detected in auto or manual searches.

Multiple RC Support If OFF is selected TV will go on normal operation. If It is ON RCU type (system code) that is chosen in “RCU program menu” will be used. “RCU program menu” can be opened by RETURN-1-2-3-4 shortcut. The multiple RC support works on RC5 type of remote controllers. To active this feature, the hotel mode should be active and from the hotel mode configuration menu, Multiple RC support should be set as ON. A stand by cycle is necessary after programming the RCU, in order for this feature to work correctly. RC key

System Code

Welcome message Welcome message option is only visible at the hotel configuration menu when it is enabled from the profile option. If this option is unactivated, no welcome message does do occurs at the tvpower on term. When the welcome message option is visible, it provides disables or enables the message screen according to customer desire. As default behaviour a welcome message image will be displayed (if hotel mode is enabled). The image will stay on screen until user presses a key. On the bottom side of image there is an message (osd message) displaying “press any key”.This message is only visible when the customer sets via profile manager as Toshiba or Sharp, or if the softwares which uses Toshiba UI. For the other customers and ui options that warning is invisble. Welcome image can be changed through USB (described in “copy from USB” section). A default welcome image is available. Welcome images must be PNG files with 960x540 resolution and 16 bit color depth. Welcome image file sizes must not exceed 150KB (153600 Bytes) for 8+2MB TVs Welcome image file sizes must not exceed 1000 KB (1024000 Bytes) for 8+4MB TVs. If 1000 KB limit is wanted to be active, then profile option EnhancedLogo should be enabled or Satellite should be enabled.

Copy service list to USB This button is only visible at the hotel configuration menu if it was enabled from the profile option. When this button is pressed all the services tuning informations (program number, name, frequency...) are written to an xml file. Then this file (service_list.xml) is copied to root of usb. Meanwhile a “Please wait” dialog is displayed. The file cen be edited by supplied “AutoChannelConfigurator” tool.

Copy service list from USB This button is only visible at the hotel configuration menu if it was enabled from the profile option. When this button is pressed the TV will look for a service_list.xml file in the to root of usb. If the file is available the services in the file will be added. Meanwhile a “Please wait” dialog is displayed. P.S. Help about “AutoChannelConfigurator” tool is available in it.

Signal Lost (no signal) message As default behaviour, if there is no signal the same welcome image is displayed. This time osd message is “no signal”.

Internal Clock If hotel mode is active a new function (add wake up timer) will be available in Settings/Timers menu. That function will open a new menu to set wake up time. After timer is saved tv can wake up automatically on desired time. If alarm option was selected as “on” after wake up tv will show welcome image and an alarm will be heared. Then any key will stop alarm and welcome image. If alarm option was selected as “off” after wake up tv will not show welcome image and the alarm will not be activated. There is a “wakeup time channel” option in hotel mode menu, Its used to set the channel, whose time information to be used for wakeup timer. If this option is “0” time information of the channel which is being watched when timer menu is opened, will be used. Otherwise a “please wait” message will be displayed before the menu is open and during “please wait” time information of the channel will be get. (This can take up to 30s). The “wakeup time channel” should be a digital service. Pin8 If ON is selected Pin8 will go on normal operation , and it is going to switch between sources automatically. If It is OFF ,Pin8 ignored , and the automatic source switching would be enabled. This functions DISABLED/ENABLED value does not effect the profile Pin8Standby option (which can be disabled or enabled via profile manager). Attention: It has no connection by the profile Pin8Standby option whose function is automatic standby waking up. Also profile Pin8 DISABLED/ENABLED value does not effect this option.

EPG Enable/Disable If hotel mode is active and this item is set as “Enabled” EPG button will work to access EPG menus. If it is set to “Disabled”, EPG menus will not be accessible.

NIT Update This option enables or disables NIT update mechanism of the TV if Hotel Mode is enabled in the Hotel Menu Dialog. Furthermore, if TerrestrialCableCombinedSearch is selected as ENABLED and CustomChannelList is selected as Single List in the profile, then the user will be able to see the following selection before starting auto search: Aerial & Cable Search If the user performs an auto search with Aerial & Cable Search selection, then TV will not update NIT. If the user performs an auto search with other selections, then TV will update NIT just like a regular DVB TV.

General Block Diagram

5 XTALI 1

close to pcmcia 1

TP198

33RR2130 33RR2129

C124 100n 10V

C133 100n 10V

5135 S333

ACT_ANT 2 GND 1

5V_VCC

CI_OUTDATA2

C129 100n 10V

CI_REG# CI_OUTVALID CI_OUTSYNC CI_OUTDATA0 CI_OUTDATA1 CI_OUTDATA2 CI_CD2#

TP122

S311

R196 10k R197 10k R198 10k R201 10k R206 10k R205 10k R199 10k R200 10k R202 10k

USB1_VCC

CI_OUTCLK CI_IREQ# CI_CE2#

CI_WE# CI_OE# CI_IORD# CI_IOWR# CI_VS1#

R204 10k

F189

10k R70

C131 100n 10V

C130 100n 10V

D C5V6

10k R72

Q4 BC848B

R71 10k

F186

5V_VCC

VCC_PCMCIA 60R Q227

C107 100n 10V

LED1

Q40 Q39

BSH103 R2260 47k

BC858B 12V_VCC

C108 100n 10V

R2259 47k R2257 33k

Q226 BC848B

LBS

5V_STBY

513x_pin82

CI_WAIT#

CI_CD2#

CI_CD1#

C1116 100n 10V

CI INTERFACE

220R R471

LBS

10V 100n C1434

E CI_PWR_EN

FC pin5 NC, pin6 current limit, R from VCC to pin6 NC TI pin5 current limit, pin4 fault, R from pin4 to GND NC

513x_pin109 513x_pin112

1 IN

5V_VCC

OUT 6

2 GND 1

3V3_VCC

OUT 6

U40

ILIM 5

TPS2553-1

R1 1 22R R2004

10k R207

VCC_PCMCIA

IR_IN

220R R474

Q5 BC848B

513x_pin39

C714 10u 16V

1 IN

R2010 4k7

CI_OUTDATA1

5135S330

C128 100n 10V

TP200C712

R2101 10k

R426 4k7

3 EN

FAULT 4

100n 16V 100p 50V

U44

USB1_VCC R2069TI 560R R2070 560R FC R428 4k7 TI

ILIM 5

TPS2553-1

3 EN

FAULT 4

Q222 BC848B

USB1_DP

TP210

nc R2242 C1397 4k7 nc 10u R2241 10V 4k7

TP209

1 CN28

2 GND

F96 1

3V3_VCC

USB1_VCC USB1_VCC

C623330R 10u 16V

U45

VDD 5

R2245 22k R2244 12k

GND 8

U65 2 EN

FB 7

APL5910

S336

3 VIN 2

IO4 6

5135_DV10

S335

4 VCNTL

3 IO2

R644 10R

R2246 1k C1399 100n

VOUT 6 NC 5

C1395 10u 10V

C1396 10u 10V

17mb82s-r4

IO3 4

USB1_DM

DRAWN BY :<YOUR NAME HERE>

A3 T. SHT:9

SCH NAME :DEMOD 2

C1398 10u 10V 5135_DV10

DVB-T2

USB1_VCC

AZ099-04S

1 POK

1 IO1

2 TP107

R643 10R

R2243 47R

3V3_VCC

OPT. 5V_VCC OPT.

TP110

ACTIVE ANTENNA

OPT.

680R R2008 680R R2009

R2096 10k

ANTENNA INPUT

C713

5135_AV12 C134 100n 10V

TP121

TP120 3

2 2

R73 10k

USB_ENABLE

C127 100n 10V

5V_VCC

7 R2 2

1V2_AVCC

C582 10u 6V3

M_CI_OUTDATA1

LBS F60

BC858B

5135_DV33

F87

CI_OUTDATA0

5136S329

AVDD33_4 C1207 100n 10V

C132 100n 10V

513x_pin21

5135S328

F84 1k

C583 10u 6V3

5136-->NC

C125 100n 10V

C126 100n 10V

6 R3 3

M_CI_OUTDATA2

5135_DV10

5135 S332

5135S327

C580 10u 6V3

M_CI_OUTDATA0

5136S331

5135_AV12

AVDD33_3

R2140 M_CI_OUTDATA3 10k CI_OUTDATA3

VCC_PCMCIA

5135_DV33

F83 1k

CI_OUTSYNC

5 R4 4

CI_INDATA4 CI_INDATA5 CI_INDATA6 CI_INDATA7 CI_OUTCLK CI_RESET CI_WAIT#

5135_DV33

1V2_513x

5135_DV10

AVDD33_2 C579 10u 6V3

M_CI_OUTSYNC

5136 S326

F82 1k

CI_OUTDATA7

5135 S325

AVDD33_1

R1 1 22R R2005

27p 50V

1V2_MT5820

330R

C1163 10u 6V3

F81 C578 10u 6V3

CI_OUTVALID

S17

C123 100n 10V

3V3_AVCC 1k

M_CI_OUTVALID 6 R3 3

C122 100n 10V

CI_OUTDATA6

CI_INVALID CI_INCLK CI_A12 CI_A7 CI_A6 CI_A5 CI_A4 CI_A3 CI_A2 CI_A1 CI_A0 CI_D0 CI_D1 CI_D2

220R R472

C121 100n 10V

7 R2 2

C120 100n 10V

M_CI_OUTDATA6

220R R473

C119 100n 10V

C118 100n 10V

M_CI_INDATA7

C577 10u 6V3

CI_OUTDATA5

CI_INDATA6

LED&VFD

1k 1

CI_INDATA7

6 R3 3

5V_VCC

F11 5135_DV335135_AV12

7 R2 2

VCC_PCMCIA

M_CI_OUTDATA5

3V3_AVCC

S2_TS_DATA_0 S2_TS_SYNC S2_TS_ VAL S2_TS_CLK

1V2_AVCC 3V3_AVCC

CI_INDATA5

CI_CD1# CI_OUTDATA3 CI_OUTDATA4 CI_OUTDATA5 CI_OUTDATA6 CI_OUTDATA7 CI_CE2# CI_VS1# CI_IORD# CI_IOWR# CI_INSYNC CI_INDATA0 CI_INDATA1 CI_INDATA2 CI_INDATA3

VCC_PCMCIA

TP119

R758 4k7 R2234 NC 4k7

CI_INDATA4

5 R4 4 R2003 22R 8 1 R1

6 R3 3

M_CI_INDATA5

CI_INDATA2

M_CI_INDATA6

C358 47n 16V

5135_DV10 513x_pin39 AVDD33_4 5135_AV12 5135_IF_P 5135_IF_N

sat bypass option

50V 10p

M_CI_INDATA4

M_CI_INDATA3

IF_AGC

1k F86

C488

3V3_VCC

CI_INDATA3

M_CI_INDATA2

CI_OUTDATA4

R208 10k

MXL601_SCL MXL601_SDA

33R

47R R49

7 R2 2

CI_INCLK C489 10p 50V

5 R4 4 R209 10k

R2199 1 R1 8 2 R2 7 3 R3 6 4 R4 5

DEMOD_TSCLK F85

CI_INDATA1

10k R74

8 7 6 5

CI_INDATA0

4 R4 5 R2002 22R 8 1 R1

5 R4 4

M_CI_OUTDATA7

TP199

LED2

1 2 3 4

R26 R1 R2 R3 R4 33R

3 R3 6

M_CI_INDATA1

M_CI_OUTDATA4

CI girisi ust-altta konacak

1: Differential 0: Single End

AVDD33_1

XTALO

AVDD33_3

XTALI

S2_TS_DATA_7 S2_TS_DATA_6 S2_TS_DATA_5 S2_TS_DATA_4 S2_TS_DATA_3 S2_TS_DATA_2 S2_TS_DATA_1 5135_DV33 1V2_513x S2_TS_DATA_0 S2_TS_ VAL S2_TS_SYNC S2_TS_CLK RF_AGC_5135

PVR_TS_DATA0

DEMOD_TSDATA0 DEMOD_TSSYNC DEMOD_TSVAL

M_CI_INCLK

R759 4k7

C12 nc DEMOD_TSVAL 10p 50V

M_CI_INDATA0

35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

CI_D3 CI_D4 CI_D5 CI_D6 CI_D7 CI_CE1# CI_A10 CI_OE# CI_A11 CI_A9 CI_A8 CI_A13 CI_A14 CI_WE# CI_IREQ#

S313 DEMOD_RST

R51 47R C492 10p 50V

close to mt5135

R2118 10k

PVR_TS_DATA0

AVDD33_2

DEMOD_RST 5135_DV10 513x_pin21 AVDD33_1 1M R737

33R

1V2_513x 5135_DV33

CI_PWR_EN

R2094 SPI_CLE 1 R1 8 SPI_DATA 2 R2 7 SPI_CLK 3 R3 6 4 R4 5

CI_D5 M_CI_OUTDATA4 CI_D4 M_CI_OUTDATA3 CI_D3 CI_CD1#

64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33

4 27MHz 3 XTALO

D5 D12 D4 D11 D3 CD1_ CHIP_CTRL S2_TS_DATA7 S2_TS_DATA6 S2_TS_DATA5 S2_TS_DATA4 S2_TS_DATA3 S2_TS_DATA2 S2_TS_DATA1 DVDD33_2 DVDD11_3 S2_TS_DATA0 S2_TS_VAL S2_TS_SYNC S2_TS_CLK RF_AGC IF_AGC TUNER_CLK TUNER_DATA DVDD11_2 DVDD33_1 AVDD33_IFPGA AVDD12_DEMOD IFPGA_INP IFPGA_INN AVSS12_DEMOD EXT_CLKSEL

U15 MT5136

CI_INVALID CI_INSYNC

1 2

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

5135_DV33

8 CN6

2 R2 7

M_CI_INSYNC

27p X5

CN18

CI_REG# 513x_pin112 5135_DV10 CI_A2 M_CI_OUTVALID CI_A1 M_CI_OUTSYNC CI_A0 M_CI_OUTDATA0 CI_D0 M_CI_OUTDATA1 CI_D1 M_CI_OUTDATA2 CI_D2 CI_CD2# CI_INT

M_CI_INVALID

C491 10p 50V

R2001 22R 1 8 R1

C180

96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 513x_pin109 5135_DV33

A15 A24 A12 A25 A7 VS2_ A6 PCMCIA_RESET A5 WAIT_ A4 A3 GPIO1 DVDD33_6 REG_ GPIO2 DVDD11_7 A2 BVD2 A1 BVD1 A0 D8 D0 D9 D1 D10 D2 CD2_ CI_INT EFUSE DVDD33_7

CI_OUTCLK

XTALO

A23 A16 A22 READY A21 WE_ DVDD11_6 DVDD33_5 A20 A14 A19 A13 A18 DVDD11_5 DVDD33_4 A8 A17 A9 IOWR_ A11 IORD_ OE_ VS1_ A10 DVDD11_4 DVDD33_3 CE1_ D15 D7 D14 D6 D13

97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128

27p

SPI_CLE SPI_DATA SPI_CLK PVR_TS_DATA1 PVR_TS_DATA0 PVR_TS_SYNC PVR_TS_VAL PVR_TS_CLK CI_TS_DATA0 CI_TS_SYNC CI_TS_VAL CI_TS_CLK DVDD11 DVDD33 DEMOD_TS_DATA0 DEMOD_TS_SYNC DEMOD_TS_VAL DEMOD_TS_CLK MT5135_RST_B DVDD11_1 NC AVDD33_RSSI ADIN0 AVSS33_RSSI TN TP AVDD33_DEMOD AVSS33_DEMOD XTALI AVSS33_XTAL XTALO AVDD33_XTAL

M_CI_INCLK M_CI_INDATA6 CI_A12 M_CI_INDATA7 CI_A7 M_CI_OUTCLK CI_A6 CI_RESET CI_A5 CI_WAIT# CI_A4 CI_A3

6 R50 47R C490 10p 50V

M_CI_OUTCLK

C179

R203 10k

R2201 47R

CLK_5135

R2258 33k

1V2_513x 5135_DV33 CI_CE1# M_CI_OUTDATA7 CI_D7 M_CI_OUTDATA6 CI_D6 M_CI_OUTDATA5

5135_DV10 513x_pin82 CI_A8 M_CI_INSYNC CI_A9 CI_IOWR# CI_A11 CI_IORD# CI_OE# CI_VS1# CI_A10

XTALI

1V2_513x 5135_DV33 M_CI_INDATA2 CI_A14 M_CI_INDATA1 CI_A13 M_CI_INDATA0

2 M_CI_INDATA5 M_CI_INVALID M_CI_INDATA4 CI_IREQ# M_CI_INDATA3 CI_WE#

09-04-2014_15:22

AX M

6 TP59 TP60 TP75 TP58

7 AOSDATA0 AOBCK AOLRCK AOMCLK

AVDD33_MEMPLL

DDRV RCLK0_ RCLK0 RDQM0 RDQS1 RDQS1_ DDRV RDQ12 RDQ14 RDQ10 RDQ8 RDQ1

10V 100n C1107

DDRV RDQ3 RDQ7 RDQ5

1V2_MT5820 REXT

3V3_AVCC

USB1_DM USB1_DP 1V2_MT5820 AVDD33_HDMI_1_RX HDMI0_CLKN HDMI0_CLKP HDMI0_RX0N HDMI0_RX0P HDMI0_RX1N HDMI0_RX1P HDMI0_RX2N HDMI0_RX2P HDMI1_CLKN HDMI1_CLKP HDMI1_RX0N HDMI1_RX0P HDMI1_RX1N HDMI1_RX1P HDMI1_RX2N HDMI1_RX2P AVDD12_HDMI_1_RX

U14 MT5820L

C53 100n

1V2_MT5820

FSRC_WR

Close to MT5820S12

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

AVDD33_DAC SAT_SCL

SYS_SCL SYS_SDA

33RR2172

AVDD12_HDMI_1_RX

SAT_SDA

C375 22p 50V

1V2_MT5820 MAIN_DAC_R SC_DAC_R MAIN_DAC_L SC_DAC_L

1V2_AVCC

DVD_L_AUD DVD_R_AUD 1u C69 SAV_AUD_L_IN SCART_AUD_L_IN 1u C71 SAV_AUD_R_IN SCART_AUD_R_IN AVDD33_AADC VMID_AADC AVDD33_XTAL_STB

1u C74 1u C73 1u C72

C33

4k7 R102 4k7 R103

R192 4k7

C208 10n 16V

3V3_STBY

D180 D62 C12V D63

TP188 UART-TX

UART-TX TP189 UART-RX

UART-RX

E R191 4k7

C12V

C331 3V3_STBY

R731 470R

C258 1u 16V

3V3_STBY_1

MT_BACKLIGHT_ON/OFF

C12V

2 1

R439 4k7

VMID_AADC

1p R45 10k R44 3V3_VCC 10k R170 REXT 22k DEMOD_RST R41 10k R283 FSRC_WR 4k7

TP203

DVD_WAKEUP DVD_SENSE PROTECT MT_DIMMING

R43 NC 10k

3V3_VCC

33RR282

BACKLIGHT_DIM C194 100n 16V

TP118

17mb82s-r4

E1 G3

E2 G4

TP117

TP202

TP201

TP115

SW1 30067087 CN11

R2087 18k

10k R48 10k R47 1

C285 10u 10V

5V_VCC

TP204

DDRV

USB1_DP

Q16 BC848B

3V3_STBY SYS_SCL SYS_SDA

SOURCE

1kF24

F25

R30 47R

R742 2k

R264 1k R263 1k

3V3_STBY

CLOSE TO MTK IC

C TP205

F187

KEYBOARD_ONBOARD

C142 100n 10V KEYBOARD

C32 100n

R440 4k7

BACKLIGHT_ON/OFF

C23 100n 16V

USB1_DM

C1181 1u 6V3

C45 100n

Q30 BC848B

C24 100n

C1157 1u 6V3

RVREF

3V3_STBY

CLK_5135

R76 10k

C1277 22p 50V F198

keyboard

TP47

mainreset

C46 100n

C17 22p 50V SYS_SCL SYS_SDA C18 22p 50V

KEYBOARD_ONBOARD C31 100n 10V R271 47R F59

C1183 1u 6V3 3V3_VCC C255 1u 16V

AVDD12_LVDSA

3V3_VCC

C57 100n

C352 10u 10V GND1

A3 T. SHT:9

SCH NAME :MAIN

R128 10k

C1173 100n R2095 1k

R807 12k

3V3_STBY

C25 100n

S23

3V3_STBY C5V6

C1109 100n

S294

C26 100n

1u C68

27p

C28 100n

AVDD33_XTAL_STB

C47 100n

AVDD12_DEMOD

PANEL_VCC_ON/OFF OPCTRL1

OPCTRL1

C80 4u7 10V

1V2_AVCC AVDD12_RGB

STRAPPING

C27 100n

AOMCLK

X4 nc

C36 100n

MXL601_SDA

close to 5820

4 27MHz 3 C172

C37 100n

3V3_STBY C52 100n

S30

DVD_SPDIF DVD_IR_ON/OFF AOSDATA0 AOBCK AOLRCK

10k R46

R123 75R C1105 100n 10V

S15

1V2_AVCC

27p

1 2

C38 100n

C256 100n

C35 100n

DDRV

C40 100n

C82 4u7 10V

C48 100n

1V2_AVCC

TP196

CLOSE TO MT5820 COM_SC

1V2_MT5820 AVDD33_PLLGP

C233 C206 1n5 10n C199 C200 10n 10n

C207 10n

AVDD33_CVBS 47n C111 100RR155 SAV_CVBS R154 47n C112 62R 39R 47n C110 100RR153 R2097 AVDD12_DEMOD DVD_CVBS_IN SC_CVBS-IN 5820_IF_P 5820_IF_N AVDD33_DEMOD

Q221 BC848B

C1106 100n 10V

10k R2091

OPWRSB

C1327 4u7 6V3

3V3_AVCC CVBS0_OUT

R2090 10k

C1104 100n 10V

3V3_STBY

VGA_VSNC VGA_HSNC VGA_B VGA_G VGA_G VGA_G_COM VGA_R SC_FB SC_B COM_SC SC_G SC_R

3V3_STBY DVD_WAKEUP

STBY_ON/OFF

3V3_STBY

C202 100RR159 10n C203 100RR158 R156 C204 10n 100R 10n R157 C201 100R AVDD12_RGB 10n

10k R2093

LED2

OPCTRL1

100RR163 S4 100RR162 R160 100R 100RR161

3V3_STBY

10k R2092

R2133 100R R2123 100R LED2 PC_SCL PC_SDA UART-RX UART-TX IR_IN S312 OPWRSB 1V2_MT5820 30062301-->DP KEYBOARD SC_PIN8 mainreset

AMP_MUTE

LED1

LED1 HDMI_1_SCL HDMI_1_SDA HDMI1_HPDIN HDMI_0_SCL HDMI_0_SDA HDMI0_HPDIN

3V3_STBY

10k R176

SC_FB

C1158 1u 6V3

S10

BACKLIGHT_ON/OFF C171

C41 100n

AVDD33_AADC

MXL601_SCL 33RR129 33RR127

3V3_VCC

20kR278 20kR279 20kR280 20kR281 AVDD33_DAC R152 R151 R150 R149 R148 R147

C42 100n

S31

SPDIF_OUT

30k 30k 30k 30k 30k 30k

C39 100n

C49 100n

C1103 4u7 10V

3V3_AVCC 33RR2171

DEMOD_TSDATA0 DEMOD_TSSYNC DEMOD_TSVAL DEMOD_TSCLK

DEMOD_RST R2139 100R R62 33R 33RR133 33RR132 33RR131 33RR130

C50 100n

AVDD33_DEMOD

C1102 100n

C257 1u 16V

S13

3V3_AVCC

C1180 1u 6V3

C51 100n

AVDD33_LVDSA

PROTECT USB_ENABLE PANEL_VCC_ON/OFF

HP_AMP_MUTE DVD_SENSE 33RR2134 AMP_MUTE CI_INT R2138 MT_BACKLIGHT_ON/OFF 100R R2137 HP_DETECT 100R POCE1_ MT_DIMMING internal gpio21

C43 100n

S14

3V3_AVCC

R2135 100R POCE0_ POOE_ AMP_RST 33RR134 PDD7 PDD6

C81 4u7 10V

3V3_VCC R2136 100R

1V2_MT5820

S16

AVDD33_CVBS

AVDD12_LVDSA SPI_CLE SPI_DATA SPI_CLK

108 107 106 105 104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55

AVDD12_LVDSA GPIO2 GPIO1 GPIO0 VCC3IO1 POWE_ PAALE PACLE POCE0_ POOE_ PARB_ PDD7 PDD6 PDD5 PDD4 PDD3 PDD2 PDD1 PDD0 POCE1_ GPIO3 VCCK3 FSRC_WR DEMOD_TSDATA0 DEMOD_TSSYNC DEMOD_TSVAL DEMOD_TSCLK SCL_SYSTEM SDA_SYSTEM VCC3IO0 DEMOD_RST RF_AGC IF_AGC AOSDATA0 AOBCK AOLRCK AOMCLK ASPDIFO0 VCCK2 AR1_ADAC AR0_ADAC AL1_ADAC AL0_ADAC AVDD33_DAC AVSS33_DAC AIN2_L_AADC AIN2_R_AADC AIN1_L_AADC AIN0_L_AADC AIN1_R_AADC AIN0_R_AADC AVDD33_AADC VMID_AADC AVDD33_XTAL_STB

1V2_MT5820 RVREF RDQS0 RDQS0_

C54 100n

AVDD33_HDMI_1_RX

100n 10V

DDRV RDQ15 RDQM1

RDQ6 RDQ2 VCC2IO1 RDQ0 RDQ11 RDQ9 RDQ13 VCC2IO2 RDQ15 RDQM1 VCCK6 RVREF RDQS0 RDQS0_ VCC2IO3 RCLK0_ RCLK0 RDQM0 RDQS1 RDQS1_ VCC2IO4 RDQ12 RDQ14 RDQ10 RDQ8 RDQ1 VCC2IO5 RDQ3 RDQ7 RDQ5 VCCK7 REXT AVDD33_USB USB_DM USB_DP VCCK8 AVDD33_HDMI_1_RX HDMI_0_RX_CB HDMI_0_RX_C HDMI_0_RX_0B HDMI_0_RX_0 HDMI_0_RX_1B HDMI_0_RX_1 HDMI_0_RX_2B HDMI_0_RX_2 HDMI_1_RX_CB HDMI_1_RX_C HDMI_1_RX_0B HDMI_1_RX_0 HDMI_1_RX_1B HDMI_1_RX_1 HDMI_1_RX_2B HDMI_1_RX_2 AVDD12_HDMI_1_RX

C209 10n 16V near IC

C44 100n

AVDD33_PLLGP

S18

HP_AMP_MUTE

C55

DDRV RDQ0 RDQ11 RDQ9 RDQ13

RDQ4 RODT RCS_ RBA0 RBA2 RA3 RA5 RA2 RA7 RRESET_ RA9 RA13 RA0 RWE_ VCC2IO0 RCAS_ RRAS_ RA12 RA11 RA8 RA6 RA1 RA4 RBA1 RA10 RCKE AVDD33_MEMPLL VCCK5 VCCK4 AO0N AO0P AO1N AO1P AO2N AO2P AOCKN AOCKP AO3N AO3P AO4N AO4P AVDD33_LVDSA AE0N AE0P AE1N AE1P AE2N AE2P AECKN AECKP AE3N AE3P AE4N AE4P

163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216

3V3_AVCC

C56 100n

3V3_AVCC

GPIO4 HDMI_1_SCL HDMI_1_SDA HDMI_1_HPD HDMI_0_SCL HDMI_0_SDA HDMI_0_HPD VCC3IO_STB OPCTRL0 OPCTRL1 OPCTRL2 VGA_SCL VGA_SDA U0RX U0TX OIRI OPWRSB VCCK0 ADIN1_SRV ADIN0_SRV ORESET_ AVDD10_LDO AVDD33_VGA_STB VSYNC HSYNC BP SOG GP COM0 RP SOY YP COM1 PBP PRP AVDD12_RGB AVSS12_RGB AVDD33_VDAC VDACX_OUT VCCK1 AVDD33_PLLGP AVSS33_CVBS AVDD33_CVBS SC SY CVBS0P AVDD12_DEMOD AVSS12_DEMOD ADCINP_DEMOD ADCINN_DEMOD AVDD33_DEMOD AVSS33_DEMOD XTALI XTALO

RDQ6 RDQ2

S19

3V3_AVCC

3V3_AVCC 10kR1984

3V3_STBY

R190 4k7

5820_TX_A_0_N 5820_TX_A_0_P 5820_TX_A_1_N 5820_TX_A_1_P 5820_TX_A_2_N 5820_TX_A_2_P 5820_TX_A_CLK_N 5820_TX_A_CLK_P 5820_TX_A_3_N 5820_TX_A_3_P 5820_TX_A_4_N 5820_TX_A_4_P

1V2_MT5820 1V2_MT5820 5820_TX_B_0_N 5820_TX_B_0_P 5820_TX_B_1_N 5820_TX_B_1_P 5820_TX_B_2_N 5820_TX_B_2_P 5820_TX_B_CLK_N 5820_TX_B_CLK_P 5820_TX_B_3_N 5820_TX_B_3_P 5820_TX_B_4_N 5820_TX_B_4_P AVDD33_LVDSA

162 161 160 159 158 157 156 155 154 153 152 151 150 149 148 147 146 145 144 143 142 141 140 139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124 123 122 121 120 119 118 117 116 115 114 113 112 111 110 109

100n 10V

3 DDRV RCAS_ RRAS_ RA12 RA11 RA8 RA6 RA1 RA4 RBA1 RA10 RCKE AVDD33_MEMPLL

RDQ4 RODT RCS_ RBA0 RBA2 RA3 RA5 RA2 RA7 RRESET_ RA9 RA13 RA0 RWE_

DRAWN BY :<YOUR NAME HERE>

07-04-2014_11:30

AX M

10u L35 1u2

C689 10u 10V

C1110 10u 10V

1k F207

S262

16V 100n L34

3 VREG5

SSW 6

4 VSS

GND 5

C808 10u 10V

100nC1151 16V

D168 R2127 3R3

Q24 BC848B

TPS_CNTRL 2

R23 10k R24 10k

Q6 BC848B

R99 4k7

S305 5V_VCC

5V_STBY S306

S28

GND C1303 10u 6V3

TP223

1V5_AVCC 1V5_VCC

VOUT 4

FDC642P Q60

N.C. R2174 100R

COMMON

TP25

FDC642P Q59 1

3 2

R462 22k

R461 22k 2

R122 10k

60R

U57 LM1117 3 IN OUT 2

3V3_VCC MOSFET_CONTROL

OUT 2 VOUT

100nC1435 16V

4 3

BACKLIGHT_ON/OFF

R2178 10k

C1304 100nC1278 10u 6V3 16V

E TP3 TP4 TP12 TP24 TP13 TP15 TP18 TP21

5V_STBY 3V3_STBY 12V_VCC VDD_Lineout 5V_VCC 3V3_AVCC 1V5_VCC 1V2_AVCC

BOARD VOLTAGES

12V_STBY

R340 1k C805 220n Q11 10V BC848B 2

FS3 Q12 BC848B

! 12V_INV

7A/32VDC

17mb82s-r4

12V_STBY 3

A3 T. SHT:9

SCH NAME :POWER DRAWN BY :<YOUR NAME HERE>

FS4 7A/32VDC

C1305 10u 6V3

R2261 100R

R468 2k2

DIMMING

R2177 10k

30049469 1.13k R465 1k2

TP74

GND

STBY_ON/OFF

1 6 1

3 IN Q2 BC848B

F199

S1 4

S27

Q220 FDC642P

TP22

TP72

TP73 2

STBY_ON/OFF_NOT

TP224 TP226

Q219 FDC642P

S301

4 R2175 10k R2176 10k

R61 10k

C362 47u 16V

U58 LM1117

R2173 100R

S29

C20

16V NC

Q46 BC848B

W_ADAPTER

2 2

12V_INV TP225

TP227

STBY_ON/OFF_NOT

R39 10k STBY_ON/OFF

R60 10k

R119 10k

R321 2k7

C3 10u 10V

100n 16V

R109 47R

R338 1k

SW2

BC848B

C5V6

CCFL INVERTER SOCKET 1

C1149 10u 10V 3V3_STBY

COMMONF190

BC848B

5V_VCC

R2124 NC 33k R296 33k

C 3V3_STBY_1

R169 22k

3V3_AVCC

5V_VCC

100nC1153

ADAPTER SOCKET

2 GND TLV0033 3 EN N/C 4

5V_STBY

R42 10k

3V3_STBY_1

1 2

JK7

R118 10k

R37 10k TP29

3V3_VCC

CN4

12V_VCC

S64

C1172 10u 10V

Q225 NTGS3446 2

OUT 5

U59

5V_VCC

1 IN

PW06_IPS19 PW05_IPS60_IPS70_Adaptor

S63

3n3 50V

5V_STBY

SW1

MOSFET_CONTROL

C1147

COMMON

STBY_ON/OFF_NOT

NC 2

PW05_IPS60_IPS70_Adaptor PW03_PW04_PW07 PW06_IPS19

12V_VCC

R108 47R

SK24

5V_STBY

12V_STBY

C811

10u

VDD_AUDIO 5V_STBY C1170 10u 10V

TL431SAMF2 U1

TP228

VBST 7

S273 S138 S2

L27 10u

5V_STBY

STBY_ON/OFF_NOT

S304

power_pin9

C803

PW03_PW04_PW07 PW06_IPS19 PW05_IPS60_IPS70_Adaptor

STBY_ON/OFF

S212

U46

4u7 6x6 olacak ÜA

C807 1u 16V

5V_CTRL

VIN 8

24V_VCC_AU

power_pin1

S211

TPS54528

S300

power_pin3

2 VFB

VFB

S303

1 EN

R2064 10k

7A/32VDC 4A FDC642P Q61

power_pin3

12V_STBY

10k R2065 TPS_CNTRL

VFB R2073 22k

C1190 R2074 R2066 120k 4k7

BACKLIGHT_ON/OFF

C1346 C1347 10u 10u 10V 10V

12V_VCC C809 10u 16V

3V3_VCC 3V3_VCC TP222

R288 33k

STP2

330R

3V3_VCC

DIMMING

F204

8n2 50V

TP229

L36 10u

S215

C148

C810S299 10u 100nC1206 100nC1205 16V 16V 16V

16V

R2232 1k8

470n 6V3

power_pin9

S316

FS2

TP2

C1375

S214

C804 D2

22u 6V3

COMMON

8 7 6 5

C1348 C1345 10u 10u 10V 10V

33p nc

100nC1152 1

C5V6

12V_STBY

CN33

TP230

C1179 2u2 6V3

12V_STBY

16V

R2222 3R3

3n3 50V

1V2_MT5820 1V2_MT5820

100nC1150

SS EN VREG5 VFB

W/B2CABLE

C1148 C216 10u 10u 10V 10V

C1344

1k F205

VBST VIN SW GND

COMMON

1V2_MT5820

1k F206

C1376 10u 16V

1 2 3 4

100n 10V

C5V6

L18

C1342 220n 25V

1V3_SAT_VCC

60R F208

3n3 50V

TPS54329E

1 2

D181

R2126 3R3

R287 33k

power_pin1

C1146

C1349 10u 10V

F201

COMMON

BACKLIGHT_ON/OFF

U63

60R

C1377 C1343 10u 220n 16V 25V

470n 6V3

12V_VCC

R165 22k

S315

F200

S302

power_pin3

C357

220n 25V

8 7 6 5

R2220 10k

BC848B Q13

SS EN VREG5 VFB

TP1

C215 10u 16V

VBST VIN SW GND

C353 220n 25V

C1371 10n 16V

DIMMING

60R

C1178 C1144 10u 220n 16V 25V

C5V6

12V_VCC

100n 10V

TPS54329E 1 2 3 4

S314

C1355 2

U17

power_pin9

R315 12k1

7 R2219 10k

R2238 10R

C197 10n 16V

R319 470R

R34 10k

STP1 12V_STBY

C136

CN32 11

75K R320

W/B2B 12

4 R35 10k

R2233 4k7

08-04-2014_17:33

AX M

NC C1195 10u 16V

C1196 10u 16V

C196 33p

HP_NEG_RIGHT

C253 1u

C190

5V_VCC

10u

VDDLB

U62 AD82587D

RESET

VDDRB

DGND

DVDD

GNDR

SA0

MCLK

N.C.1

L_OUT_P

VDD_AUDIO

A_OUT2B

BCLK

VDDRA

100n

C307 220n 50V

R_OUT_N

10u F9 R824 4k7

220R

3V3_AMP 1

VDD_AUDIO

R692 100k

2 1

R100 4k7

AUDIO AMP for 16" to 24" 1

R40 10k

C21 100n Q17 16V

B2 2

AOLRCK

AOMCLK

AMP_EN

R67 4k7 2

OUTR

GND

MUTE

VSS

OUTL

UVP

U2 DRV632 GND1

VDD

7 CN C533

R243 33k

HP_NEG_LEFT

R255 56k

INL_N

E VDD_Lineout

10u

MAIN_L R381 47k R467 1k5

C283 SC_DAC_R

1u 6V3

C268 12p 50V R260 68k

C280 SC_AUD_L_OUT

1 OUT1

VDD 8

2 IN1-

OUT2 7

TL062

VDD_AUDIO/2 C293 150p 50V

R244 33k

3 IN1+

IN2- 6

4 VSS

IN2+ 5

10u C265 12p 50V R259 68k VDD_AUDIO/2

C281 SC_DAC_L C294 1u 150p 6V3 50V

1u 3V3_AMP

F191

100nC1154 16V

17mb82s-r4

C420

VDD_AUDIO

C29 10V 100n

A_OUT2A

220n 10V

A_OUT2B

1u 6V3

C534

220n 10V

INR_N

SC_AUD_R_OUT

HP_AMP_EN

C99 10u 16V

C284

R188 100k

33k R500

RIGHT

R65 4k7

C205

R1 100R

C191

1u C141 100n 10V NC

INL_P

OUTP

SDB

INN

VDD1

VDDA

OUTN

GNDA

INP

GNDB

TP11 1

PT2333

MAIN_R

INR_P

HP_NEG_RIGHT MAIN_R

U23

HEADPHONE AMP

VDD_AUDIO

33k R245

C139 100n 10V

R308 33k

A_OUT1B

VDD_AUDIO/2

A_OUT1A

AMP_EN

C152 100n 10V

R68 4k7

220n 10V

AOBCK

VDD_Lineout C1286 10u 16V

47R R2098

BC848B

R464 3k3

C306

R64 100R

R66 4k7

AOSDATA0

220n 10V

C193

MAIN_L

12V_VCC

R2119 10k R2120 10k R2121 10k R2122 10k

OUTP

SDB

INN

GNDB

VDD1

VDDA

OUTN

INP

GNDA

LEFT

R247 33k

10u

TP207

PT2333

VDD_AUDIO 12V_VCC

BC848B Q14

3V3_AMP

HP_AMP_MUTE

BC848B

10k R93

S22 S21

100u 16V

10k R79

10k R1983 C620

BC848B Q8

R489 33k

C146 100n 16V

HP_AMP_EN

C251

R78 10k

C140 100n 10V NC

10k R80

2 3

C302 1u 50V

A_OUT2A

AMP_MUTE

C250

A_OUT2B

D39 BAW56

C699 220n 50V

30068742

L3 15u

AMP_EN 12

C1340 220n 50V

L_OUT_N

2 1

A_OUT1B

VDD_AUDIO

C1337 R2217 18R GND1

A3 T. SHT:9

SCH NAME :AUDIO AMP DRAWN BY :<YOUR NAME HERE>

R183 100k

SCL

10k R88

56k R258

R_OUT_N

100n

SDA

R_OUT_P

C288 1u 50V

1V2_MT5820

R804 6k8

3V3_VCC

C311 220n 50V

R2218 18R

TP193

GNDL

TP192

LRCIN

CN13

A_OUT1A

BC858B Q43

33k R246

C1328 3V3_AMP 100n R2214 16V 4k7 3V3_AMP R2210 AOMCLK 100R R2209 AOMCLK 100R AOBCK C1329 12p 50V

BC858B Q41

3V3_AMP

AMP_RST C1350 100n 16V

C1336

R2223 4k7

SDATA

C1341 220n 50V

SYS_SCL

VDD_AUDIO

R657 47k

R691 100k

SYS_SDA

N.C.2

TP194

AOLRCK R2211 100R R2212 100R

VDDLA

ERROR

AOSDATA0

TP195

R2213 100R

3V3_VCC

B R322 100R

R_OUT_P

10u 15u 1

R92 10k

R82 10k

L2 A_OUT2A

A_OUT2A

12V_VCC

220R 220R

Q10

BC848B F22 F18

R83 10k

24V_VCC_AU

R84 10k

C34 100n L_OUT_N 10V

1 2

R490 33k R81 5k1 R494 10k R86 3k9

3V3_AVCC

30068742 C287 1u 50V

R85 10k

100n

A_OUT1B

Q42 BC858B

R2216 18R C1335

L5 15u A_OUT1B

BC848B

C698 220n 50V

D40 BAW56

3V3_STBY_1

SHORT CCT PROTECTION

GND1

C1339 220n 50V C313 220n 50V

PROTECT

C1334

3V3_AMP

C704 10u 16V

C245 100n 16V

C286 1u 50V

C312 220n C1338 50V 220n 50V

TP26

60R

L_OUT_P

R2215 18R

3V3_AMP

3V3_VCC

100n

C1333

100n

C1332

100n

C1331

A_OUT1A

F7 100n

220R

10u

C1330

3V3_VCC

15u

AMP_EN

F23

NC C1176 10u 25V

VDD_AUDIO

C252

33p

HP_NEG_LEFT

7 NC R182 100k MAIN_DAC_L

C675 10u 10V

R219 27k R237 47k

MAIN_L

270p

C674 10u 10V

NC R189 100k MAIN_DAC_R

D41 BAW56

5 R224 27k R238 47k

8W 30067972 2w5 30069845 24V_VCC_AU

S141

C143 100u 35V

MAIN_R

100n

S93

5V_VCC

VDD_AUDIO

C242

C795 220u 10V

R647 10k

50R S200

24V_VCC_AU

C238

2 F172

270p

1 S116

12V_VCC

03-04-2014_10:27

AX M

75R R301

C455

JK13

UART-TX

WHT

50V 33p

SAV_L

5 C453

TP81

75R R300

50V 33p

C262 330p 50V

220p 50V

C1184

R167 10k R168 10k

C266

3V6 lik zener kullanilmali

3n3 50V

4k7 R1149

S86 COM_SC

5V_VCC

R352 100R

SC_AUD_R_OUT

SCART_AUD_L_IN

3 WHT

C520 SCART_AUD_R_IN

TP97 JK5 JK4

2 1 RED

4n7 50V

TP98

50V

2 3 1

C87

R363 100R

C 100n

10V

Q31 BC848B

100n

SPDIF_OUT

10V

C676

220R R482

S117 1

R442 4k7

F73

R1986 220R C442 22p

4 YEL

10V

4n7 50VSC_CVBS-IN_pin20

SPDIF OUT

TP85

C440 22p 50V

C441 22p 50V

INDIA OPTION

C519

SCART_AUD_R_IN

R441 4k7

SC_AUD_L_OUT

R481 220R

TP84

R353 100R

100n

C261 330p 50V

3V3_TUNER

F80

SCART_AUD_L_IN F72

TP86

SAV_AUD_R_IN

C88

TP56 F77

SAV_R

100n 10V

C456

SAV_R

C78 2

6 TP185

TP31 R33 100R

SAV_AUD_L_IN

7 TP83

SC_B

R144 10k

C15V

S82

SC_PIN8 D17

JK6

3n3 50V

UART-RX

R2185 5k1

SAV_R

9 TP186

C91 10n 16V

HP_DETECT

TP65 F76

SC_G

R306 75R

C267

C90 10n 16V

SAV_L

RED

220p 50V

C5V6 SAV_L

12 S81

75R R317

SAV_CVBS

75R R304

D12

C5V6

SC_R

75R R302

50V 33p

YEL

SC_FB

R261 47R R262 47R

47R R38

1 TP30

TP33

S231

SAV_CVBS

C451 2

TP82S83

TP66

C452

TP32

MAIN_R

R126 47R

S230

220p 50V

MAIN_L

R125 47R

6 C335

75R R305

TP67

50V 33p

15 TP187

SCART LT1

50V 33p

TP80

C1185

R303 75R

SC_CVBS_OUT

SLIM HEADPHONE OUTPUT

SC_CVBS-IN

SAV Slim INPUT

C454 33p 50V

20 SC_CVBS-IN_pin20

SC1

S84

21 TP79

D170

CDA4C16GTH

D35

AZ5125-01J

D34

2 8

CDA4C16GTH

C77 100n 10V

2 1

R143 10k R142 10k R141 10k

D33

VGA CONNECTOR

D60 BAV70

5V_VCC TP61

VGA_DDC_5V

5V_VCC

3V3_VCC

R447 4k7 R445 4k7 R448 4k7

C239 100n 16V

3D_EN

S139 R351 1

S79

S80

1 2

100R

VGA_VSNC

R350

100R

Q32 BC848B

PC_SCL

R349

100R

2 1

4k7 R101

4k7 R446

3V3_VCC

3D_ENABLE

PC_SDA

VGA_HSNC

VGA_DDC_5V

2k2 R798

100R

2k2 R799

TP62 TP63 TP64 TP68

R348

8 7 6 5 4 3

S75

VGA_B

S76

VGA_G

S77

VGA_R

VGA

30071260 kullanilacak

INPUT

jumper L1 SC_CVBS_OUT R496 33k

R293 75R

1u8 C457 33p 50V

CVBS0_OUT C458 33p 50V

R294 75R 2

TP71

R295 75R

TP70

TP69

1 3

2 NUP4004M5 4 D32 5

CN17

S78

17mb82s-r4

VGA_G_COM

T. SHT:9

SCH NAME :PERIPHERAL DRAWN BY :<YOUR NAME HERE>

03-04-2014_10:27

AX M

HDMI0

UA 100R OLMALI

RDQS1_ RDQS1

DML DMU

E7 D3

RDQM0 RDQM1

ODT

B_RODT

HDMI1_RX2P

S25

HDMI1_RX2N HDMI1_RX1P

CLK0

CLOSE MT

CLOSE DRAM

HDMI1_RX1N HDMI1_RX0P

RCLK0_

S24

CLK#0

HDMI1_RX0N HDMI1_CLKP

CEC

Q29

BC848B

PL4

PL3

PL2

BC848B

R54 10k

5V_STBY PL1

Q28 8

C289 10u 10V

22R R325

HDMI1_HPDIN R55 10k

DDRV C290 10u 10V

D167

60R

R289 100R 100R R290

HDMI_1_SCL HDMI_1_SDA

A9 B3 E1 G8 J2 J8 M1 M9 P1 P9 T1 T9

HDMI1_CLKN

F10 1V5_VCC

F221 F219 90R 1 90R 4 FR1 4 1 FR1 2 FR2 3 2 FR2 3

21 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

RESET ZQ

CN8

T2 L8

HDMI1

47k R240 47k R239

B_RESET

BC848B B_RA11 B_RA8 B_RA6 B_RA1

R194 100k R21 1k

RAS CAS WE

BC848B

R52 10k

5V_STBY

J3 K3 L3

RCLK0

Q27

B7 C7

B_RA4 B_RBA1 B_RA10 B_RCKE

DQSU_1 DQSU_0

Q35

21 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

RDQS0 RDQS0_

RA11 RA8 RA6 RA1

22R R324

HDMI0_HPDIN

B_RA3 B_RA5 B_RA2 B_RA7

R53 10k

DQSL_0 DQSL_1

F3 G3

RA4 RBA1 RA10 RCKE

RDQ8 RDQ9 RDQ10 RDQ11 RDQ12 RDQ13 RDQ14 RDQ15

D7 C3 C8 C2 A7 A2 B8 A3

DQU0 DQU1 DQU2 DQU3 DQU4 DQU5 DQU6 DQU7

RA3 RA5 RA2 RA7

R292 100R 100R R291

HDMI_0_SCL HDMI_0_SDA

RDQ0 RDQ1 RDQ2 RDQ3 RDQ4 RDQ5 RDQ6 RDQ7

CEC

E3 F7 F2 F8 H3 H8 G2 H7

F220 4 4 3 3

R193 100k R20 1k

A1 A8 C1 C9 D2 E9 F1 H2 H9

DQL0 DQL1 DQL2 DQL3 DQL4 DQL5 DQL6 DQL7

5 6 7 8

B_RAS_ B_RCAS_ B_RWE_

240R R276

VREF_DQ VREF_CA

RRESET_ RA9 RA13 RA0

B_RCS_

F218 90R 1 90R 1 FR1 FR1 2 FR2 2 FR2

HDMI0_RX0N HDMI0_CLKP

CKE

HDMI0_RX1N HDMI0_RX0P

B_RODT B_RCS_ B_RBA0 B_RBA2

HDMI0_RX2N HDMI0_RX1P

B_RCKE

C58 100n 16V

H1 M8

BA0 BA1 BA2 CK_0 CK_1

R4 4 R3 3 R2 2 R1 1 33R R310 5 R4 4 6 R3 3 7 R2 2 8 R1 1 33R R309 5 R4 4 6 R3 3 7 R2 2 8 R1 1 33R R299 5 R4 4 6 R3 3 7 R2 2 8 R1 1 33R R298

B_RESET B_RA9 B_RA13 B_RA0

HDMI0_RX2P

HDMI0_CLKN

U16 H5TQ2G63BFR-PB

J7 K7

B_RWE_ B_RCAS_ B_RAS_ B_RA12

VDD_1 VDD_2 VDD_3 VDD_4 VDD_5 VDD_6 VDD_7 VDD_8 VDD_9

NC1 NC2 NC3 NC4 NC5 NC6

M2 N8 M3

CLK0 CLK#0

J1 L1 M7 L9 T7 J9

DDRV

RODT RCS_ RBA0 RBA2

R4 4 R3 3 R2 2 R1 1 33R R311 R312 33R 1 R1 8 2 R2 7 3 R3 6 4 R4 5 5 6 7 8

VSSQ_1 VSSQ_2 VSSQ_3 VSSQ_4 VSSQ_5 VSSQ_6 VSSQ_7 VSSQ_8 VSSQ_9

B_RBA0 B_RBA1 B_RBA2

A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10/AP A11 A12/BC A13

RWE_ RCAS_ RRAS_ RA12

B1 B9 D1 D8 E2 E8 F9 G1 G9

N3 P7 P3 N2 P8 P2 R8 R2 T8 R3 L7 R7 N7 T3

VSS_1 VSS_2 VSS_3 VSS_4 VSS_5 VSS_6 VSS_7 VSS_8 VSS_9 VSS_10 VSS_11 VSS_12

B_RA0 B_RA1 B_RA2 B_RA3 B_RA4 B_RA5 B_RA6 B_RA7 B_RA8 B_RA9 B_RA10 B_RA11 B_RA12 B_RA13

VDDQ_1 VDDQ_2 VDDQ_3 VDDQ_4 VDDQ_5 VDDQ_6 VDDQ_7 VDDQ_8 VDDQ_9

B2 D9 G7 K2 K8 N1 N9 R1 R9

DDRV

C62 100n 16V

D166

C321 330p 50V

C63 100n 16V

C320 330p 50V

R2 100R

C64 100n 16V

C395 100n 16V

Near to pin 165 of MT5820 C1115 1u R265 6V3 1k R266 1k C59 100n 16V DDRV R268 1k R267 1k

DDRV C291 10u 10V

CN12

47k R242 47k R241

C11

R2132 1k

BC848B Q19 2 1

DVD_IR R420 4k7 1

Flash_WP

CS# SO WP# GND

VCC HOLD# SCLK SI

8 7 6 5

2 2 1

R4 R5 100R 100R 1

POOE_ PDD6

3V3_VCC

Flash_WP

C145 100n 10V

FS1 12V_VCC C1423 10u Close to 25V FS1

DVD_Power

4A/24VDC

17mb82s-r4

DVD_IR_ON/OFF

DRAWN BY :<YOUR NAME HERE>

A3 T. SHT:9

SCH NAME :MEMORY/HDMI

TP95

3V3_VCC

C1108 100n 10V

POOE_ Flash_WP

N.C.

1 2 3 4

R104 4k7 TP87

POCE1_ PDD7

POOE_ PDD6

U10 MX25L512

R110 4k7 TP102 1 1

R6 100R 100R R7

R11 R10 100R 100R 1

8 7 6 5

TP96

VCC HOLD# SCLK SI

S26

R105 4k7 TP89 TP88

TP100 TP101 TP99

C18V

CS# SO WP# GND

3V3_VCC

DVD_SPDIF

IR_IN

TP57 DVD_WAKEUP DVD_IR TP92

DVD CONNECTION

1 2 3 4

C147 1N5819 100n 10V

R107 4k7

R3 100R

SH2

50V 220p C339

S53

3V3_VCC

U12 MX25L512

SERIAL FLASH

D165 2

R106 4k7

D54

C1160

4k7 R418

2 1

TP206

R1357 4k7

9 50V 220p

TP93 2

R344 100R

R679 47k

R9 100R 100R R8

Flash_WP

R419 4k7

TP90

POCE0_ PDD7

DVD_Power D53

C567 10u 25V TP91

S54

TP78

DVD_SENSE 10V 100n C76

S268

C13

DVD_R_AUD R2068 4k7

R2071 180R R2072 180R

3V3_VCC

CN20

50V 27p

DVD_CVBS_IN

C15V

R2067 4k7 DVD_L_AUD

SERIAL FLASH

TP76

27p 50V

TP77

NC 1

09-04-2014_15:43

AX M

OPTIONS TABLE

MEGA_DCR_OUT

R518 33k R230 10k R519 33k R231 10k

PANEL_VCC

TX_1_0_N

TX_1_0_P

TX_1_1_N

TX_1_1_P

TX_1_2_N

TX_1_2_P

TX_1_CLK_N

TX_1_CLK_P

TX_1_3_N

TX_1_3_P

TX_2_0_N

TX_2_0_P

TX_2_1_N

TX_2_1_P

TX_2_2_N

TX_2_2_P

TX_2_CLK_N

TX_2_CLK_P

TX_2_3_N

TX_2_3_P

OP_PIN9

PANEL_VCC

PANEL_VCC 1

R1962 33k R1961 10k

PANEL_VCC 30

CN16

12V_VCC 12V_VCC

15.6"

PANEL_VCC

CN15

BACKLIGHT_ON/OFF DIMMING

CN14

5820_TX_B_0_N 5820_TX_B_0_P

3 4

5820_TX_A_2_N 5820_TX_A_2_P

5820_TX_A_CLK_N 5820_TX_A_CLK_P

5820_TX_A_3_N 5820_TX_A_3_P

TX_1_1_N TX_1_1_P

3 FR2 2 4 FR1 1 90R F42

TX_1_2_N TX_1_2_P

3 FR2 2 4 FR1 1 90R F41

TX_1_CLK_N TX_1_CLK_P

3 4

FR2 FR1

2 1

TX_1_3_N TX_1_3_P

5820_TX_B_1_N 5820_TX_B_1_P

S235 S234

3 4 2

FR2 FR1

2 1

TX_2_0_N TX_2_0_P

5820_TX_B_2_N 5820_TX_B_2_P

5820_TX_B_CLK_N 5820_TX_B_CLK_P

5820_TX_B_3_N 5820_TX_B_3_P

3 FR2 2 4 FR1 1 90R F31

TX_2_1_N TX_2_1_P

3 FR2 2 4 FR1 1 90R F30

TX_2_2_N TX_2_2_P

3 FR2 2 4 FR1 1 90R F29

TX_2_CLK_N TX_2_CLK_P

3 4

90R F39 5820_TX_A_4_N 5820_TX_A_4_P

FR2 FR1

5820_TX_A_0_N 5820_TX_A_0_P

90R F38

3 FR2 2 4 FR1 1 90R F43

FR2 FR1

2 1

5820_TX_A_1_N 5820_TX_A_1_P

5820_TX_A_2_N 5820_TX_A_2_P

5820_TX_A_CLK_N 5820_TX_A_CLK_P

TX_2_3_N TX_2_3_P

5820_TX_A_3_N 5820_TX_A_3_P

TX_2_4_N TX_2_4_P

5820_TX_A_4_N 5820_TX_A_4_P

90R F27 TX_1_4_N TX_1_4_P

2 1 90R F40 TX_1_4_N TX_1_4_P

5820_TX_B_4_N 5820_TX_B_4_P

S232 S233

3 4 2

FR2 FR1

2 1 90R F28 TX_2_4_N TX_2_4_P

3 R2 2 4 R1 1 0R R232 3 R2 2 4 R1 1 0R R235 3 R2 2 4 R1 1 0R R520 3 R2 2 4 R1 1 0R R457 3 R2 2 4 R1 1 0R R456 1 R1 4 2 R2 3

TX_1_0_N TX_1_0_P

TX_1_1_N TX_1_1_P

TX_1_2_N TX_1_2_P

TX_1_CLK_N TX_1_CLK_P

5820_TX_B_0_N 5820_TX_B_0_P

5820_TX_B_1_N 5820_TX_B_1_P

5820_TX_B_2_N 5820_TX_B_2_P

5820_TX_B_CLK_N 5820_TX_B_CLK_P

TX_1_3_N TX_1_3_P

5820_TX_B_3_N 5820_TX_B_3_P

TX_1_4_N TX_1_4_P

5820_TX_B_4_N 5820_TX_B_4_P

0R R534

6 1

FDC642P Q48

33k R512 1

220n 25V

2 1

R2147 33k 2 1

OP_PIN27 2

OP_PIN26

OP_PIN42

TX_1_0_N TX_1_0_P TX_1_1_N TX_1_1_P TX_1_2_N TX_1_2_P

TP43 TP44 TP45 TP46 TP48 TP49

TX_2_0_N TX_2_0_P TX_2_1_N TX_2_1_P TX_2_2_N TX_2_2_P

TP16 TP17 TP27 TP28 TP34 TP35

TX_1_CLK_N TX_1_CLK_P

TP42 TP50

TX_2_CLK_N TX_2_CLK_P

TP36 TP37

TX_1_3_N TX_1_3_P TX_1_4_N TX_1_4_P

TP51 TP52 TP53 TP54

TX_2_3_N TX_2_3_P TX_2_4_N TX_2_4_P

TP38 TP39 TP40 TP41

OP_PIN43

S164

OP_PIN44

S71

OP_PIN45

OP_PIN46

DIMMING 3 R2 2 4 R1 1 0R R569 3 R2 2 4 R1 1 0R R568 3 R2 2 4 R1 1 0R R567 3 R2 2 4 R1 1 0R R564 3 R2 2 4 R1 1 0R R563 3 R2 2 4 R1 1 0R R535

C605

OP_PIN11 2

JUMPER

90R F26 5820_TX_A_1_N 5820_TX_A_1_P

OP_PIN10

3V3_VCC

TX_2_0_N TX_2_0_P 1 2

2 1

TX_1_0_N TX_1_0_P

C616 1n 50V

TX_2_1_N TX_2_1_P

MEGA_DCR_OUT

R453 4k7

BC858B Q38

C343 1

3 4

FR2 FR1

S188

BACKLIGHT_ON/OFF

PANEL_VCC

Q21 BC848B

OP_PIN9

OP_PIN41

R124 33k R90 10k R2239 10k

R222 10k

OP_PIN9

OP_PIN40

PANEL_VCC

FERRITE

PANEL_VCC_ON/OFF

S142

R522 33k R234 10k

OP_PIN8 2

R2240 10k

S122

R58 47R

R513 33k R225 10k

R521 33k R233 10k

60R

OP_PIN7

PANEL_VCC

5V_VCC

S123

12V_VCC

F3 2

PANEL_VCC

OP_PIN5

OP_PIN10

OP_PIN6

TX_1_0_N

TX_1_0_P

TX_1_1_N

TX_1_1_P

TX_1_2_N

TX_1_2_P

TX_1_CLK_N

TX_1_CLK_P

TX_1_3_N

TX_1_3_P

OP_PIN9

OP_PIN8

OP_PIN7

OP_PIN27

PANEL_VCC

OP_PIN11

3D_EN

60R

R2146 10k

CN10

LVDS 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

SAM BASED 30070519

S185

5V_VCC OP_PIN6

R517 33k R229 10k

PANEL_VCC

19" TO 22" DOUBLE LVDS FFC OPTIONS

5820_TX_A_0_N 5820_TX_A_0_P

PANEL_VCC

60R

MEGA_DCR_IN PANEL_VCC

S186

F5 12V_VCC

R511 33k

PANEL_VCC

C94 100u 16V

CN9

LG BASED 30070519

R516 33k R228 10k

PANEL_VCC

SAM

OP_PIN5

R223 10k

OP_PIN45 OP_PIN44 OP_PIN43 OP_PIN42 OP_PIN41 OP_PIN40

LVDS 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

WXGA FFC

60R

PANEL_VCC

3V3_VCC

F4 R515 33k R227 10k

PANEL_VCC

F6 1

PANEL SUPPLY SWITCH

R514 33k R226 10k

PANEL_VCC

S183

3D_EN

TX_1_2_P TX_1_2_N TX_1_1_P TX_1_1_N TX_1_0_P TX_1_0_N OP_PIN11 OP_PIN10 OP_PIN9 OP_PIN8 OP_PIN7 OP_PIN6 OP_PIN5

TX_1_CLK_P TX_1_CLK_N

TX_2_2_P TX_2_2_N TX_2_1_P TX_2_1_N TX_2_0_P TX_2_0_N OP_PIN27 OP_PIN26 TX_1_4_P TX_1_4_N TX_1_3_P TX_1_3_N

TX_2_CLK_P TX_2_CLK_N

OP_PIN43 OP_PIN42 TX_2_4_P TX_2_4_N TX_2_3_P TX_2_3_N

OP_PIN46

FHD 50Hz 3D FFC

TP55

100n 16V

C248

R714 1k

S169

TX_2_2_N TX_2_2_P S168

BACKLIGHT_DIM TX_2_CLK_N TX_2_CLK_P MEGA_DCR_IN

S167

220p 50V

S20

R172 100R 1 R1

7 R2 2 1

R454 4k7

DIMMING

6 R3 3

Q26 BC848B

5 R4 4 TP231 1

TX_2_3_N TX_2_3_P

R455 4k7

C625 10u 16V

Q22 BC848B

C345 1

220p

50V

TX_2_4_N TX_2_4_P

17mb82s-r4

10_BIT PANEL

T. SHT:9

SCH NAME :LVDS CON DRAWN BY :<YOUR NAME HERE>

07-04-2014_09:47

AX M

D171

RESET_N AS

R135 33R

C1174 10u 6V3

16V 100n C1112 12p

C79 1u 6V3 C75 1u 6V3

16V 100n C92

VDD_1P2

GND_DIG

VDD_IO

SCL

U4 MXL601

VDD_3P3_1

IF_OUTN_1

IF_OUTP_1

IF_OUTN_2

IF_OUTP_2

3V3_TUNER DIGITAL_IF_N DIGITAL_IF_P ANALOG_IF_N ANALOG_IF_P

DIGITAL_IF_N 1k

1u C263

C318 47p 50V

F35

DIGITAL_IF_P 1k

C11871u 47p 50V C259

C319 47p 50V

S32 5135_IF_P

3D_ENABLE

Flash_WP

GS5 CI ALTINA F32

R13 100R

1k F33

R12 100R

ANALOG_IF_P C1189 1u 47p 50V

C85 1k 100n 16V

VDD_1V8

CLOSE TO DEMOD

ANALOG_IF_N C1188 1u 47p C260 50V

R15 100R

5135_IF_N

C316 47p 50V

C317 47p 50V

5820_IF_P

5820_IF_P 3V3_VCC

360R R173

C1186 47p 50V

RF_IN_P

R16 100R

C F188

360R R14

F34

D_IF_AGC C86 100n 16V NC C1164 10u 6V3

RF_IN_N

C C264

1 NC R2128 10k 3V3_TUNER

10k R56

C1159 1u 6V3

MXL601_SCL

IF FILTERS

VDD_1P8_2

MXL601_SDA

GND_XTAL

VDD_1P8_1

AGC_1

C1162 22p 50V

R111 4k7 R112 4k7 1

C269 100n 16V

MXL601_SCL

XTAL_P

AGC_2

VDD_1V8

VDD_1P8_0

10nF2n2 50V

MXL601_SDA

XTAL_N

LNA_INN

C104

SDA

4 27MHz 3

VDD_3P3_0

1 2

DEMOD_RST

2n2 1.8nF 50V

C1401 100p 50V

3V3_TUNER

12p IF_AGC

C105

C270

3V3_TUNER

22R R785

C89 47n 16V

C153

10V 100n

R269 1M

C150

10V 100n

MXL601_SDA

R22 10k

C271

R784 22R

MXL601_SCL

C1161 22p 50V

C324

ACT_ANT

C1194 1u 6V3

RF_IN_N

C109 180p 50V

D_IF_AGC

50V

220n

S319

LNA_INP

0.7pF 220nH

CLK_OUT

270n

L20

ESD0P8RFL

12n

JK12

RF_IN_P C323 1n

4 82p 50V

C322

3 180R R2099 1k

S318 C1113 27p 50V

VDD_1V8

S317

12n

50V

3n9

390n C135

L38

L13

560nH

F47

50V

AZ5425-01F 1n

390nH

L10

GND1

5820_IF_N

10k R57

10k R59 CI_INT

5820_IF_N

ONLY ANALOG

CLOSE TO DEMOD

S41

3V3_AVCC

3V3_TUNER

17mb82s-r4

T. SHT:9

SCH NAME :TUNER DRAWN BY :<YOUR NAME HERE>

03-04-2014_10:27

AX M

SAT_SCL

SAT_SDA

DISEQC_OUT

12V_VCC

100R R2252 100R R2251

SCL/VADJ

10 SDA

11 VCTRL

AGND

PGND

TCAP

VCC

EN/ADDR

U67 TPS65233

ISEL

BOOST

EXTM

VCP

FAULT

VIN

D189

VLNB

3V3_VCC

R2254 6 130k100k C1418 5

100n 10V 22nF

10u

S339

C1424 10u L39 25V

C1417 100n 10V

S323

R2253 10k

1N5819

25V 2u2 C1420

C1425 10u 25V

1N5819

C1426 10u 25V

1N5819 D188

C1427 10u 25V

1N5819

100nF

1V3_SAT_VCC

C1364

C1433 1u 16V

VSEL

12V_VCC

LNA_IP

DISEQC_IN

LNA_IN

DISEQC

TEST0

VCC4

GNDD4

M_ERR

M_CLK

M_SYNC

M_VALID

C14211k 10u 16V

DISEQC_OUT

OLF

LNB_EN

ADDR_SEL1

IT_LOCK

VCC5

GNDD5

TEST3

TEST2

VDDA3

NC C1379

C1422 C1416 100n 10u 16V 16V

C1363

100p 50V C1384 10nF

C1356 10V100n

50V 1n

50V 3V3_SAT_VDDA

3 4

50V

C1357

3V3_VCC

2 1

27p

27MHz

50V 27p

C1353

C1354

GND1

CAP

VDDA1

XTAL_OUT

XTAL_IN

10V100n 3V3_SAT_VDDA

1V3_SAT_VCC C1358 R2221 10k

CLK_OUT

VDDA2

GNDD3

GNDD1

VCC3

VCC1

M_DATA7

RESETN

M_DATA6

S324

10p S2_TS_CLK S2_TS_SYNC S2_TS_ VAL

1V3_SAT_VCC

M_DATA5

M_DATA4

M_DATA3 22

M_DATA2

M_DATA1

M_DATA0

TEST1

VDDD 17

VCC2

GNDD2 15

SCL

SDA

R2230 33R R2229 33R R2228 33R

33R 5 R4 4 6 R3 3 7 R2 2 8 R1 1 R2236

10V100n

C1361

R2237 33R 5 R4 4 6 R3 3 7 R2 2 8 R1 1 S2_TS_DATA_4 S2_TS_DATA_5 S2_TS_DATA_6 S2_TS_DATA_7

C1369 100n 10V

SAT_SDA

C1372 10u 6V3

S2_TS_DATA_0 S2_TS_DATA_1 S2_TS_DATA_2 S2_TS_DATA_3

3V3_SAT_VDDA

3V3_VCC

C1389 C1390 10p 10p 50V 50V 20pF 20pF

3V3_SAT_VDD

F202 60R

SAT_SCL

C1391 NC

R2227 33R R2226 33R

R2225 4k7 R2224 4k7

1V3_SAT_VCC

10V100n

3V3_SAT_VDD

C1360

S2DEMOD_RESET

PVR_TS_DATA0

100n 10V S2DEMOD_RESET

R2231 33R

C1359

10V100n

1V3_SAT_VCC

10V100n

50V

LNB_OUT LNB_OUT 1n

100n 10V

C1362

50V

C1381

C1383

50V

C1382

C1380

M88RS6000 U64

C1352

VDDA4

C1351

VDDA5

S320

C1393

D192

C1419 100n 10V 50V 220n C1432

F215

50V

GND1 1n

50V 0p5 2pF

3p3 50V

6 7 8 9

100pF

100n 10V

C1392 2p2F

CN34

50V 100p

100n 10V C1366

5 4 3 2

100n 10V C1367

C1365

100n 10V

3V3_SAT_VDDA

C1430 C1431 C1429 10u 10u 10u 25V 25V 25V

F216

D190

LNB_OUT

NCS340

1N5819

LNB_OUT

D191

C1428 10u 25V

C22V

F217

D193

4k7 R2255 4k7 R2256

3V3_SAT_VDD

3V3_VCC C1370 100n 10V

1V3_SAT_VCC C1368 100n 10V

17mb82s-r4

T. SHT:9

SCH NAME :SAT_1 DRAWN BY :<YOUR NAME HERE>

07-04-2014_09:46

AX M

XCAPS

S23 S15

RL207

V_1 V_2 R45

R114 1M R115 1M

V_1

V_50

100k R289 10R

V_2

+400V R93

R280 10k 10R R253

10R

R281 10k

1 2

C225 1n 50V

100k R91

3 4

DET

U202 FB

FAN6300 CS

VDD

GND

GATE

C30 1m5 35V

C31 35V 1m5 R9

D7 BA159

ST_BY

26R F12

SF10L60U D10

Q3 BC848B

C55 1n 50V

+24Vdc OUTPUT

D301

FDS4685

R14 1k 1n 50V C57

Q4 BC848B

R15 1k R8 1k

C56 1n 50V

R13 R12 1k

UF5402

+24VCC_SW

26R C32 560u D36 S40 F9 35V C12V

C68 16V 22u

D35 C12V

AUDIO_REG

R7 R6 1k

Q2 BC848B

SF10L60U

R5 C63 1n 50V

D6 BA159

50R F26

D5 BA159

50R F25

R29

+400V 1

GATE

Q15 FQPF8N60C

C39 47p 2kV

R77 10R

DRAIN

10R R76 Q13 BC858B

D298 C18V

24V_AC

2X6 PINLI MB SOKET OPS.

PIN_9

140R

12V_AC

ST_BY

7 N3

12V_AC

BL_ON-OFF

TR1

N4 8 5 +400V

PWM_DIM

+5V_STBY

12V_AC

AUX 12

1 TRANSFORMATOR OPTION

F21 800R

R75 10R

CN4

PIN_1

F15

13 GATE

F16 140R

VCC

C5V1

TR2

R100 100k R96

8 7

24V_DC

UF5402 D15

100k

1N4148 D19 C302 1u 50V

UF5402 D14

F20 70R

D300

1u L5

UF5402 D11

70R

R51 10R R50 10R R49 10R R52 10R R303 1k R304 1k

R291

C296 1u 50V

C5V1 +24VCC

D16HER207

R99

R95

10R

AUX

39u 450V

S24

S33

100k

SMPS CONVERTER BLOCK C299 10p 50V

39u 450V

D17HER207

R98 100k

R290

V_10

100k

R94

10R

V_1

V_50

R97 100k

+400V

R297

100k

R92

V_6

39u 450V

2kV 47p C38

C25 4n7 630V

C16 1n 4kV

C316 1m 16V

F10 26R

UF5402 D12

24V RCD SNUBBER OPTION

C312 1u 50V

C41 100n 275V

C43 56n 275V

LF3

C20

24V_AC

C313 1u 50V

C15 1n 4kV

LINE FILTER OPTION V_5

C21

F19

R307

V_4 S16

V_2

C19

800R

V_50

C310 56n 275V

D13

C306 47p 2kV

V_10

10R

R117 1M R116 1M

10R

R119 1M R118 1M

V_3

C11 1n 4kV

V_6

WITHDRAWAL RESISTORS

C12 1n 4kV

26R

C26 560u 35V

C314 1m 16V

+400V

F13 V_4

+12VCC

C69 22u 16V

140R

RL207

C309 56n 275V

F11

C6 56n 275V

C3 100n 275V

V_10

UF5402 D34

SP4

C308 100n 275V

SB5100

C71 560u 35V

S30

L3 10u

C305 56n 275V

C317 56n 275V

3.15A/250V

LF1

F23

FS1

LF2

UF5402 D33

UF5402 D42

C70 560u 35V

SP3

+12Vdc OUTPUT

1u L4

TH1

UF5402 D41

SB5100 D22

PINGOOD OPTIONS

C315 1m 16V

SB5100 D26

140R F22

R85 10k

TH4

510V V1

S22 S14

3.15A/250V

SP2

12V_DC

SB5100 D23

F17 70R

F24 800R

RL207 D40

SP1

SB5100 D24

F18

D32

RL207 D30

V_3

10R

V_1

10R

V_5

TH2 10R

FS2

S12

1n 4kV

D31

800R

SP5 S4 2

F14

S8 S2

TH3 10R

1n 4kV

D25

12V_AC

R46 10R

C18

47p2kV C37

70R

V_1

CN1

C5 56n 275V

C85 470n 275V

C17

V_6

S10

C2 100n 275V

C8 56n 275V

R32 10R

S11

C7 56n 275V

50R

C13 1n 4kV

S13

C4 100n 275V

R308 10R R44 10R

C86 220n 275V

D4 BA159

ROCKER SWITCH CN2

C1 100n 275V

D8 BA159

V_2

C14 1n 4kV

V_2

AUDIO_REG

V_5

R305 1k R306 1k R56 10R R55 10R R53 10R R54 10R

2m2 35V

4 12V RCD SNUBBER OPTION

C27

D39 SBR10U150

SBR10U150 D38

24V_AC

+12VCC S29

+12VCC

DRAIN

PIN_3

PIN_4

C62 1n 50V

PRIMARY to SECONDARY Ycap R309 10R OUTPUT DIODES HEATSINKS

C303

R310 10R

C9 1n 4kV

R33 10R

HS3

1n 4kV

R101 120R

C10

R82 56k

D3 BA159

D20

AUX

RS1008FL C64 1n 50V

R34 10R

1n 4kV

VCC

C73 47u 50V

PIN_9

12V_AC

N4 N5

C33 1m 16V

2X10 PINLI MB SOKET OPS. 10 PIN_1

CN3

FEEDBACK BLOCK OUTPUT SELECTION

D37 C12V

TCET1102G

100k

PL2

C307 1n S301 4kV

SOFT_START

R20 1N4148 D18 C52 1u 50V

PL1 C304 1n 4kV

R300 1k

+12VCC

C60 1n 50V

R22 1k R4 1k

+12VCC C34 ST_BY

50V 1k R21

C59 1n 50V

U1 TL431SAMF2

Q7 BC848B

S41

1k R25 R24

R23

Q8 BC848B

R80 39K

Q9 BC848B

+12VCC

R27 1k

Q1 BC337

D2 Q10 BC848B

BL_ON-OFF R79 33k

12V to 5V LDO OPTION

PWM_DIM

+5V_STBY

+12VCC

PIN_3

PIN_4

+12VCC

C29 10u 10V

PROJECT NAME :

+5V_STBY C28 10u 10V

R28 1k

+12VCC

BL_ON-OFF

ST_BY

S26

R31 1k

12V_AC

1n 50V

R26 1k

PIN_9

S25

PIN_9

C36

C35

U2 4

C61 1n 50V

PL3

R302

SMPS MOSFET HEATSINK

HS1

R47 10R

C6V8

1n 4kV

+400V PL4

ST_BY

C6V8

C311

DUMMY LOAD CIRCIUT

56k

K10104

12V_DC

S42

2 200k R83

S17

24V_DC R81

R2 100k

4M7

HS2

1n 50V

S28

+24VCC_SW

R301 10R

SCH NAME :

DRAWN BY :

17ips71-r3

A3 T. SHT:

16-05-2014_11:20

AX M

V_SW

C24 C300 10u 10u 16V 16V

Tapped Coil Option

S21

S302

OUTPUT DIODE RC SNUBBER CIRCUIT

R71 10R R72 10R

CON_AC

C23 C301

R73 10R R74 10R

1u C50 V_LED+ 25V

10u 10u 16V 16V 47u BOOST INPUT VOLTAGE

+24 C22 50V L8

25V 470n C76

C51 1u 25V

13u

D28

+24

F2 F8

S55

LED4

5 6 7 8

ISENSE

MP3394 OSC

OVP

ISET

LED1

BOSC

LED2

LED4

LED3

GATE_LED C80 10V 2u2

13 12 11 10 9

R112 330k

CS_LED

GATE_LED

LED1

R78 10R D21

F5 50R

50R Vp

50R

C65 1n 50V

Q20 FQPF9N50C Q17 FQD7N10L

10k R86

S43

R106

V_LED+

S18

LED3_S 6 LED4_S

OVP_LED

R70 R69 R68 R67 R66 R65

Q14 BC858B

3 LED2_S

47pC44 2kV

1N4148 C78 2u2 10V

LED3

2 LED2_S R107

R104

OVP_LED LED2

1 LED1_S

SB5100

C45 47p 2kV

CN6

V_LED+

100R

GND

50R F7

F6 50R

50R

BOOSTED OUTPUT

100R

R111 330k R113 6k8 R3 100k

GATE

C49 1u 25V

VCC_LED

SB5100 D27

100R

S54

DBRT

10R

330n 16V

VIN

10R

VCC

10R

COMP

50R F3

L6 150u

10R

PWM_DIM

10R

BL_ON-OFF

330n 16V 270R R90 R88 10R C77

V_SW

100R

C79 2u2 10V

SB5100 V_LED+ 1

47u 200V

25V 470n C74

D29 4

17u

C90

LED DRIVER

R89 270R

R62 10R R61 10R R59 10R R58 10R

C75

2m2 35V

R64 10R R60 10R R63 10R

2m2 35V C88

S19

POWER BOARD to LED BARS CONNECTION

C87

+24

+24VCC_SW

V_SW

S20 +24VCC

CON_AC

R105 CN7

CS_LED

1 BL_ON-OFF 2 PWM_DIM 3

LED DRIVER VCC CONNECTION

+12VCC

VCC_LED

S46

5 C84 10u 50V

C83 10u 50V

+24

LED DRIVER SINK MOSFET OPTION

CHANNEL OPTIONS S53

LED2_S

LED4_S

LED1 S52

Q19 FQD7N10L

VCC_LED

R87 10k

R298

S51

R110 100R

R299 100R

LED4

LED3

10k

VCC_LED

LED2

Q18 FQD7N10L

LED4

S50

8 LED1_S

LED2_S

LED3_S

LED4_S

LED2 S49 LED1 S48 LED3 S47 LED3

LED2

LED4

LED2

LED1_S

S45

LED2_S

LED3_S

S44

LED4_S

PROJECT NAME :

SCH NAME :

DRAWN BY :

17ips71-r3

A3 T. SHT:

03-04-2014_11:17

AX M

C1 1u 50V

C2 1u 50V

C3 1u 50V

C C5 100n 50V

VS 3

IR1

R3 220R

R1 100R

C6 100n 50V

GND 2

OUT 1

VBC30034

3 2 C4 100n 50V

1 CN1

R2 22R

D xx335 LED BMS TOSHIBA

17ld171-r6

T. SHT:1

SCH NAME :1 DRAWN BY :<YOUR NAME HERE>

11-11-2014_10:33

AX M

TROUBLESHOOTING (17MB82S) 1. No Backlight Problem Problem: If TV is working, led is normal and there is no picture and backlight on the panel. Possible couses: Backlight pin, dimming pin, backlight supply, stby on/off pin Backlight pin should be high in open position. If it is low, please check Q30 and panel cables.

1/10

Dimming pin should be high or square wave in open position. If it is low, please check S16 for Mstar side and panel or power cables, connectors.

Backlight power supply should be in panel specs. Please check CN4 for MB82, related connectors for power supply cards.

2/10

STBY_ON/OFF should be low for standby on condition, please check R2090.

2. CI Module Problem Problem: CI is not working when CI module inserted. Possible couses: Supply, suply control pin, detect pins, mechanical positions of pins CI supply shoul be 5V when CI module inserted. If it is not 5V please check CI_POWER_CTRL, this pin should be low.

3/10

Please check mechanical positions of CI module. Detect ports should be low. If it is not low please check CI connector pins, CI module pins and 3V3_VCC on MB82.

4/10

3. Led Blinking Problem Problem: LED blinking, no other operation This problem indicates a short on Vcc voltages. Protect pin should be logic high while normal operation. When there is a short circuit protect pin will be logic low. If you detect logic low on protect pin, unplug the TV set and control voltage points with a multimeter to find the shorted voltage to ground.

5/10

4. IR Problem Problem: LED or IR not working Check LED card supply on MB82 chasis.

6/10

5. Keypad Touchpad Problems Problem: Keypad or Touchpad is not working Check keypad supply and KEYBOARD pin on MB82

6. USB Problems Problem: USB is not working or no USB Detection. Check USB Supply, It should be nearly 5V.

7/10

7. No Sound Problem Problem: No audio at main TV speaker outputs. Check supply voltages of VDD_AUDIO, 5V_VCC or 12V_VCC with a voltage-meter. There may be a problem in headphone connector or headphone detect circuit (when headphone is connected, speakers are automatically muted). Measure voltage at HP_DETECT pin, it should be 3.3v.

8/10

8. No Sound Problem at Headphone Problem: No audio at headphone output. Check HP detect pin, when headphone is. Check 5V_VCC and 3V3_VCC with a voltagemeter.

9. Standby On/Off Problem Problem: Device cannot boot, TV hangs in standby mode. There may be a problem about power supply. Check 12V_VCC, 5V_VCC and 3V3_VCC with a voltage-meter. Also there may be a problem about SW. Try to update TV with latest SW. Additionally it is goood to check SW printouts via hyper-terminal (or Teraterm). These printouts may give a clue about the problem.

9/10

10. No Signal Problem Problem: No signal in TV mode. Check tuner supply voltage; 3V3_TUN. Check tuner options are correctly set in Service menu. Check AGC voltage at IF_AGC pin of tuner.

10/10

TOSHIBA LIFESTYLE PRODUCTS & SERVICES CORPORATION 2-9, Suehiro-Cho, Ome-Shi, Tokyo 198-8710, Japan

REV. 00 Feb/18/2015