PASMAG - 122 - June/July by PASMAG - Performance Auto & Sound

THE TUNER’S SOURCE FOR MODIFIED CAR CULTURE

$4.99

LUSIV C X

BUYERS GUIDES SUBWOOFERS & AMPLIFIERS SUSPENSION & CHASSIS FORCED INDUCTION COMPETITION

FORMULA D AT LONG BEACH

FORCED INDUCTION SPECIAL

MARK BUFFINGTON’S PRISTINE 8,000-MILE

EVO 8

NOW

H I D E MI

...AND THE LEGEND OF

CLUB

4AG DARK HORSE

TYLER PFLANZ’S EPIC ’93 SUPRA

DON’T BE A

H8R! 1964 FAB 360

LINCOLN CONTINENTAL

PASMAG.COM

PM40069655

R10760

Display Until 07/31/14

JUNE/JULY 2014 - $4.99

Cover - June (16.03).indd 1

CHINA GOES ALL IN FOR TUNING

EVENT COVERAGE FROM SBN 2014, IASCA, IMPORT FACE-OFF & MORE!

ALL-NEW

ENTRANTS FOR

2014

4/25/2014 3:06:48 PM

TOYO0282 “Proxes Campaign FPS” PERFORMANCE AUTO & SOUND (PAS) MAG ID: JUNE 2014 - LEFT T: 15.75" x 10.75", L: 15" x 10", B: 16" x 11" Gutter: .5" total, Bind: PB, 300%md CMYK mt

We ARE FAST AND STEADY AND

TOYOTIRES.COM/PROXEs

TOYO0282 “Proxes Campaign FPS” PERFORMANCE AUTO & SOUND (PAS) MAG ID: JUNE 2014 - RIGHT T: 15.75" x 10.75", L: 15" x 10", B: 16" x 11" Gutter: .5" total, Bind: PB, 300%md CMYK mt

WE ARE TOYO. ALL OR NOTHING.

ONLY BRAKE WHEN WE HAVE TO.

High Performance That Never Rests.

Untitled-1 1

2014-04-17 1:31 PM

NEW FOR 2014

PLUS 100 MORE PRODUCT LINES!

905.822.7223 â&#x20AC;¢ JRPONLINE.COM 2344 SOUTH SHERIDAN WAY, MISSISSAUGA, ON, CANADA TWITTER.COM/JRPONLINE

LIKE US ON FACEBOOK

INFO@JRPONLINE.COM

CALL OR EMAIL US TO SET UP YOUR WHOLESALE ACCOUNT TODAY FOR QUALIFIED CUSTOMERS

JRP (rebuilt).indd 1

2/18/2014 11:26:56 AM

MADE

TO WIN COMPETITION BRED 16 WAY REBOUND AND COMPRESSION ADJUSTABILITY The HSD MonoPro coilover is exactly what the performance tuning scene has been crying out for. The MonoPro series coilovers offer the most features and the best quality for under $1350. HSD Coilovers use a Monotube damper design favoured by high end suspension companies and each kit is TUV approved. This level of quality and performance is usually found on much more expensive suspension products.

HIGH QUALITY MONOTUBE DAMPERS

Cheaper aftermarket dampers use a twintube design with low pressure gas whereas our Monotube damper design uses large diameter pistons and a much higher gas pressure to better stabilise the oil within, even under extreme and prolonged use.

HEIGHT ADJUSTMENT

A very wide range of height adjustment is possible without affecting the spring pre-load or the damper stroke length. So whether you want sporty or totally slammed, you still get the full performance of the damper.

FULLY ADJUSTABLE DAMPING

Our 16 Stage damping adjustment allows quick, easy and accurate control of the damping so you can tune it to suit your style and setup. Set to soft for your daily drive, then quickly switch to hard for track days or competition use.

PILLOW BALL TOP MOUNTS

Our coilovers come with Anodised Aluminium top mounts with integrated heavy duty noise-free pillowball bearings all round. A wide range of camber adjustment is included on front strut models.

HSD MONOPRO SERIES NEWEST APPLICATIONS Honda Civic 2012+ Nissan GT-R R35 Chevy Cruze Mazda 2 Mazda 3 2010+ KIA Soul Hyundai Sonata 2012+ FRS / BRZ (Sport Spec) BRZ / FRS (Touring Spec) BMW E90 Scion TC 2011+

Trending - Hot Topics_v2.indd 4

2014-04-25 3:03 PM

Untitled-2 1

2014-04-07 3:03 PM

TRENDING

SOCIAL MEDIA UPDATES

LIFE STYLE

SPOTTERS GUIDE TOPICS GUIDE 30 HOT 34 SPOTTERS 38

FEATURED EVENT

CUPCAKE MEET 19

Lone Star Park, Grand Prairie, TX – March 9, 2014 PHOTOGRAPHY BY ANTHONY GUERRA

1 A TRIBUTE TO TAKUMI FUJIWARA’S TOYOTA AE86 / SPRINTER TRUENO FROM THE HIT MANGA/ANIME SERIES, INITIAL D 2 THE MOLDED WIDEBODY, KSPORT SUSPENSION AND DEEP DISH WHEELS ON THIS IS 300 FIT PERFECTLY WITH THE CUSTOM LICENSE PLATE, “OHGAWD” 3 THE SR20DET MOTOR IN AUBRE HOUCK’S NISSAN 240SX S14 KOUKI SHINES BRIGHT WITH MAGENTA-COLORED ACCENTS, THE POLISHED-ALUMINUM INTAKE MANIFOLD AND PIPING 4 JESSICA HEWITT’S RE AMEMIYA BODY-STYLING ROTARY ADDICTION MAZDA RX-7 FD 5 ASH FROM POKEMON WOULD HAVE A HARD TIME CHOOSING BETWEEN THIS RB26 MOTOR AND CYNDAQUIL

IMPORT FACE-OFF

Southwestern International Raceway Tucson, AZ - March 16, 2014 PHOTOGRAPHY BY CLIFF WALLACE (IMPORTFACEOFF.NET)

1 ICB MOTORSPORT X RCG K20 ACURA INTEGRA WITH KINSLER 60MM ITBS. 2 “SLEEPER” SR20DET DATSUN 510. 3 IFO MODELS. 4 TYLER PFLANZ’S FULLY BUILT 2JZ-GTE 1993 TOYOTA SUPRA. 5 SHREDDING TIRES.

PASMAG

JUNE 2014

Event Spotters Guide_V2.indd 2

2014-04-25 3:56 PM

MFEST PHILLIPPINES

Clark International Speedway, Pampanga April 12-13, 2014 PHOTOGRAPHY BY PETER WU

MFEST HAS A TENDENCY TO BRING OUT THE NICEST BMWS ANYWHERE. WHILE YOU SHOULD ALREADY KNOW ABOUT MFEST VIII, WHICH MOST RECENTLY TOOK PLACE IN VEGAS, YOU MIGHT BE SURPRISED TO KNOW THAT IT ALSO HELD AN EVENT A MONTH PRIOR. WHERE, YOU ASK?! WELL, IT MIGHT SURPRISE YOU TO KNOW THAT THE PHILIPPINES HOSTED THE FIRST MFEST COMPETITION OUT OF THE U.S. EVER, FROM APRIL 12 TO 13! MFEST FOUNDER CHRIS NAGUIT PLAYED POINT MAN IN GETTING THE EVENT OVERSEAS TO THE CLARK INTERNATIONAL SPEEDWAY, A FORMER U.S. MILITARY BASE. THE EURO SCENE IS STILL PLAYING CATCH-UP TO THE JDMS OVER THERE, BUT PLANS ARE IN PLACE TO SEE WINNERS OF VARIOUS CATEGORIES (DRAG, DRIFT AND SHOW) GET INVITED TO THE MAJOR U.S. EVENT. STAY TUNED FOR ANOTHER PHILIPPINES EVENT IN NOVEMBER, WHERE WE’RE SURE TO HAVE EVEN MORE NEWS AND SEE AN EVEN BIGGER CROWD!

OC MEET: SEASON OPENER

Presented by Clean Culture x The New Era Stony Point, NY – Apr 19, 2014 PHOTOGRAPHY BY TERENCE GAMBLE

1 AMANDA EBERLE’S 2015 SUBARU WRX WAS THE FIRST VISCONTI STAGE 2 ECUTEK TUNE WITH AN INVIDIA EXHAUST. 2 THIS CARBON & SUNBURST M3 IS BUILT TO DESTROY – TRACK OR STREET. 3 JOSE AND HIS GODZILLA STOMPED OUT OF CONNECTICUT TO JOIN SOME FELLOW NISSANS. 4 HANDS DOWN: WILLY IZAGUIRRE WINS THE CLEANEST ENGINE IN HIS OLD-SCHOOL JDM DATSUN. 5 EVEN SPORT BIKES ATTENDED THE MEET.

JUNE 2014

Event Spotters Guide_V2.indd 3

PASMAG

2014-04-25 3:56 PM

TRENDING

SOCIAL MEDIA UPDATES

LIFE STYLE

SPOTTERS GUIDE TOPICS GUIDE 30 HOT 34 SPOTTERS 38

FEATURED EVENT

1 TUNER GALLERIA

Donald E. Stephens Convention Center, Chicago, IL – March 1, 2014 PHOTOGRAPHY BY RAY FLORES

1 ABMOTORING’S SUBARU BRZ EQUIPPED WITH A ROCKET BUNNY V2 BODY KIT. 2 THIS BEAUTIFULLYASSEMBLED NISSAN 350Z IS PART OF A CHICAGO CAR CLUB CALLED TEAM IC. 3 RB26DET POWERED 1992 NISSAN 240SX S13. 4 PRAS KHUON’S TOYOTA SUPRA SPOTTED WITH NEW WHEELS - SYMBOLIC XL-15 19X9 (F) / 19X12 (R) CHROME STRIPPED, RE-BARRELED. 5 TUNER GALLERIA 2014: THOUGH THE ENGINE IS RELATIVELY EXPENSIVE COMPARED TO OTHERS, WE ALL LOVE HEARING THE NORTH AMERICAN-MARKET ENGINE IN THIS ARIZONA GREEN TEA DATSUN 510 SCREAM UP TO 9,000 RPM W/ VTEC.

PASMAG

JUNE 2014

Event Spotters Guide_V2.indd 4

2014-04-25 3:57 PM

allin t uni n g c h i n a . co m Untitled-3 1

2014-04-25 6:42 PM

TRENDING

SOCIAL MEDIA UPDATES

LIFE STYLE

FEATURED EVENT TOPICS GUIDE 30 HOT 34 SPOTTERS 38

FEATURED EVENT

IN IASCA BASS BOXING, THERE WERE WORLD RECORDS SET IN EVERY CLASS AND IN SEVEN CLASSES OF THE IDBL COMPETITION.

IN THE

ZONE

BY MICKY SLINGER | PHOTOGRAPHY BY DAVE MACKINNON

SPRING BREAK NATIONALS OCEAN CENTER, DAYTONA BEACH, FL

pring break is always loud in Florida, but nowhere is it louder than at the Spring Break Nationals in Daytona Beach. The 2014 edition aimed to shake the foundation of the Ocean Center and, with over 61 mobile electronics brands present and three independent zones to please all factions, the 28th running of the “World’s Most Famous Soundoff” delivered. The newest addition to SBN this year was the Audiophile Zone. This area featured the unnatural quiet needed to truly experience these extremely defined sound system designs. With close to 200 guest enthusiasts lending their ears to the experience, the new showcase proved more than successful. “The Audiophile Room was a great place to intently listen to a high-end sound system,” says Ben Vollmer of Audition Audio, who was showing an updated version of his classic 1988 Acura Legend. The Sound Quality Zone was home to industry manufacturers, distributors and dealers. SBN drew thousands of guests to interact with hundreds of the biggest names in the automotive sound industry for insight and advice. Along with the displays and exhibits showcasing the newest in trends and technology, the Tuner Jam show cars were also on full blast. Of course things got noisy, but within a reason44

PASMAG

able amount. A new mandate this year was a noise level of no more than 95 dB in the SQ Zone. There were a few infractions from time to time, but not having to scream at clients was well worth it for the exhibitors. The allotted 100,000 square-foot Sound Pressure Level Zone made sure all that space was put to good use. DEMOZ competitions featured BASSHEADS and Hair Tricks, who entertained the audience with sound system tricks and demos. They were showing off the newest trend, called “floating,” which is exactly as it sounds; just crank your subs and float objects on the bed of air created by the fast-moving air currents created by the bass! Sound pressure levels were also put to the test by competitions hosted by IASCA Worldwide, dB Drag Racing and MECA associations. In IASCA Bass Boxing, there were world records set in every class and in seven classes of the IdBL competition (check out the standings chart to see the new records set by the best). In IASCA Sound Quality competition, high scores

JUNE 2014

Spring Break Nationals_V2.indd 2

2014-04-25 11:06 AM

RECORDS IASCA BASS BOXING WORLD RECORDS 140.8 dB Jay Tremblay

BANTAMWEIGHT RECORD HOLDER

148.6333 dB

Joey Majewski CRUISERWEIGHT RECORD HOLDER

151.2333 dB

Rick Menendez FLYWEIGHT RECORD HOLDER

150.5333 dB

Jose Ortega FEATHERWEIGHT RECORD HOLDER

151.5333 dB

Jonathan Leviner LIGHTWEIGHT RECORD HOLDER

153.0667 dB Nick Watts

WELTERWEIGHT RECORD HOLDER

155.6 dB

Matthew Karlovic MIDDLEWEIGHT RECORD HOLDER

157.7667 dB

Eddie Moreno HEAVYWEIGHT RECORD HOLDER were set by Taylor Mushtare (Rookie category), Joe Clark (Amateur), Bao Tran (Pro/Am), Jim Meyer (Pro) and Ben Vollmer (Ultimate). The Triple Crown saw fierce competition, but it was Canadian Julian Ridi who took the Seat Division win, with Ben Vollmer locking in second. MECA saw incredible feats of its own with Team Incriminator’s Craig Butler setting the highest sound pressure score with 181.5 dB – the highest in MECA competition history. Ridi added to his award tally by earning the MECA SQL Best of Show trophy with highest scores in the Sound Quality, Install and RTA Frequency Output categories. “There were well over 300 vehicles competing at the event this weekend,” says Moe Sabourin, Director of Operations for IASCA Worldwide. “Between the Sound Quality competition going on at the South Plaza and on the show floor, the SPL and DEMOZ competitions in the exhibit hall, and the IASCA Tuner Jam car show all over the venue, there was plenty to see and do. We’re very excited about the turnout, and happy to say that the majority of competitors at the event said it was the best SBN show in years.”

Spring Break Nationals_V2.indd 3

IASCA IDBL WORLD RECORDS SET BY CLASS: 141 dB 148.1 dB

Michael Chanata

Larry Tollman

160.8 dB

159.5 dB

TRUNK/PICKUP 2

Ronald Garrett

HATCHBACK/WAGON 3

154.6 dB

Matthew Karlovic ADVANCED 2

TRUNK/PICKUP 3

Sean Belanger ADVANCED 1

152.4 dB

Stephen Washington ADVANCED 3

150.5 dB David Garcia ULTIMATE

2014-04-25 11:06 AM

TRENDING

Amps ALPINE PDR-M65 $549 | alpine-canada.com

AUDIOPIPE APCL-15001D Contact for pricing | audiopipe.com Number of Channels: One CEA-2006 Power: 1,500 W x 1 Topology: Class D Crossovers: LP Equalization: Subsonic Frequency Response (-3 dB): 80 Hz to 180 kHz S/N Ratio (CEA-2006 standard): 70 dB Dimensions: 14.06-in. (L) x 2.16-in. (H) x 6.93-in. (D)

Number of Channels: One CEA-2006 Power: 450 W RMS x 1 @ 4 Ω, 650 W RMS x 1 @ 4 Ω Topology: Class D global modulation with dual negative feedback Crossovers: Variable LP Equalization: Variable bass EQ Frequency Response (-3 dB): 8 to 400 Hz (1 W into 4 Ω) S/N Ratio (CEA-2006 standard): 113 dBA (Ref: 1 W into 4 Ω) Dimensions : 9-in. (W) x 2.06-in. (H) x 7.13-in. (D)

AXXERA AX47S $249.99 | axxeraaudio.com Number of Channels: Four CEA-2006 Power: 74 W RMS x 4 @ 4 Ω, 126 W RMS x 4 @ 2 Ω Topology: Class D Crossovers: Variable HP/LP Equalization: Bass boost Frequency Response (-3 dB): 10 Hz – 35 kHz S/N Ratio (CEA-2006 standard): >90 dB (THD < 0.05 %Ω, 12V) Dimensions: 5.9-in. (L) x 1.5-in. (H) x 3-in. (D)

BLUES AUDIO BA-1.1000 $199.99 | bluesaudiousa.com Number of Channels: One CEA-2006 Power: 1000 W x 1 @ 2 Ω, 500 W x 1 @ 4 Ω Topology: Class D Crossovers: Built-in LP (50Hz to 500Hz) Equalization: N/A Frequency Response (-3 dB): 10 Hz to 25 Hz S/N Ratio (CEA-2006 standard): >110 dB Dimensions: 13.1-in. (L) x 2-in. (H) x 8.8-in. (D)

DD AUDIO SS2B

CLARION XC6410 $499 | clarion.com/us Number of Channels: Four CEA-2006 Power: 125 W x 4 @ 2 Ω, 85 W x 4 @ 4 Ω Topology: Class D Crossovers: HP/LP electronic crossovers Equalization: Independent bass extender control Frequency Response: 20 Hz to 20 kHz S/N Ratio (CEA-2006 Standard): 80 dB (1 W into 4 Ω) Dimensions: 8.75-in. (L) x 2.2-in. (H) x 6.9-in. (D)

$369 | ddaudio.com Number of Channels: Two CEA-2006 Power: N/A Topology: Full Range Class D Crossovers: HPF/LPF Equalization: N/A Frequency Response (-3 dB): 20 Hz to 20 kHz S/N Ratio (CEA-2006 standard): N/A Dimensions: 6.69-in. (L) x 6.69-in. (W)

PASMAG

JUNE 2014

Hot NEW Products - AMPS.indd 2

2014-04-25 7:21 PM

"I’D RANK THE SOUND QUALITY PERFORMANCE OF THIS AMPLIFIER IN THE UPPER ECHELON OF CAR AUDIO AMPLIFIERS" GARRY SPRINGGAY TECHNICAL EDITOR PASMAG

CREATING EMOTIONS Designed by Robert Zeff exclusively for ARC Audio

THE DEBUT OF THE NEWEST GENERATION OF XDI AMPLIFIERS IS A TESTAMENT TO THE OUT OF THE BOX THINKING NEEDED TO CREATE THE NEXT “BIG THING” IN CAR AUDIO. The idea of having raw power, reliable performance and sonic purity all in a single affordable amplifier design is just a dream for many. Well it’s time to turn the dream into reality. With a simple, yet creative concept, ARC Audio has taken a new approach to “Quality” and “Hi-End” innovation without any of the compromises found in today’s full-range digital amplifier designs.

WWW.ARCAUDIO.COM 4719 GREEN LEAF CIRCLE #4, MODESTO, CA 95356, TEL: 209.543.8706 FAX: 209.543.9269

DISTRIBUTED IN CANADA BY ERICKSON CONSUMER 21000 Trans-Canadienne / Baie D’Urfe, Quebec, H9X 4B7 / Tel: (514) 457-6674 | Fax: (514) 457-0055 Toll Free: 1 (800) -567-3275 / Fax: 1 (866) 450-5507 / eriksonconsumer.com

ARC Audio.indd 1

2014-04-24 7:57 PM

TRENDING

Amps JL AUDIO XD1000/5V2

KENWOOD XR900-5

MB QUART RA1000.4

Contact for pricing | jlaudio.com

$449.99 | kenwoodusa.com

$379.99 | mbquart.com

Number of Channels: Five CEA-2006 Power: 75 W RMS x 4 @ 4 Ω, 100 W RMS x 4 @ 2 Ω, 600 W RMS x 1 @ 2 Ω (max sub channel) Topology: Class D Crossovers: N/A Equalization: N/A Frequency Response (-3 dB): 12 Hz to 22 Hz (+0, -1 dB) S/N Ratio (CEA-2006 standard): >84 dB Dimensions: 14.7-in. (L) x 2.05-in. (H) x 7.09-in. (D)

Number of Channels: Five CEA-2006 Power: 60 W RMS x 4 @ 4 Ω, 400 W RMS x 1 @ 4 Ω Topology: Class D Crossovers: Variable HP/LP (50 Hz – 200 Hz) Equalization: N/A Frequency Response (-3 dB): 20 Hz – 20 kHz (±1 dB) S/N Ratio (CEA-2006 standard): >78 dB Dimensions: 10.25-in. (L) x 2-in. (H) x 6.6-in. (D)

Number of Channels: Four CEA-2006 Power: 125 W x 4 @ 4 Ω, 250 W x 4 @ 2 Ω Topology: Class A/B Crossovers: Switchable HP/LP/Full & Variable Equalization: Bass boost (0 to 12 dB at 45 Hz) Frequency Response (-3 dB):15 kHz to 250 Hz S/N Ratio (CEA-2006 standard): >92 dB Dimensions: 21.02-in. (L) x 2.4-in. (H) x 8.27-in. (D)

HIFONICS HERCULES 4K $829.99 I hifonics.com Number of Channels: Mono CEA-2006 Power: RMS / DYNAMIC 4 ohm mono - 1 x 900 W / 1,800 W 2 ohm mono - 1 x 1,600 W / 3,200 W 1 ohm mono - 1 x 2,000 W / 4,000 W Topology: Ultra Class D Crossovers: 35 Hz to 250 Hz (Low Pass) Equalization: 30 Hz to 100 Hz (boost range 0 to 10 dB) Frequency Response (-3 dB): 15 Hz to 250 kHz S/N Ratio (CEA-2006 standard): >95 dB Dimensions: 19.75-in. (L) x 2.76-in. (H) x 8.97-in. (D)

KICKER KX800.5

ORION XTR3700.1D

$ 4 9 9 . 9 5 | k i c ke r. c o m

Contact for pricing | info@mdaudio.net Number of Channels: One CEA-2006 Power: 3,700 W RMS, 7,200 W (Peak) Topology: Class D Crossovers: LP (15 Hz to 250 Hz) Equalization: N/A Frequency Response (-3 dB): 15 Hz to 259 Hz S/N Ratio (CEA-2006 standard): >90 db Dimensions: 19.4-in. (L) x 2.5-in. (H) x 9.3-in. (D)

PASMAG

Number of Channels: Five CEA-2006 Power: 200 W x 2 @ 4 Ω, 100 W x 4 @ 2 Ω Topology: Class D Crossovers: HP/LP Equalization: Bass boost (0 to 18 dB) Frequency Response (-3 dB): 10 Hz – 20 kHz S/N Ratio (CEA-2006 standard): >95 dB Dimensions: 12.75-in. (L) x 2.13-in. (H) x 8.31-in. (D)

JUNE 2014

Hot NEW Products - AMPS.indd 3

2014-04-25 7:21 PM

Untitled-3 1

2/12/2014 2:23 PM

TRENDING

Amps

MEMPHIS CAR AUDIO MJ5.1400

SOUNDSTREAM STL4.1000D

$1,099.95 | memphiscaraudio.com

$219.95 | soundstream.com

Number of Channels: Five CEA-2006 Power: 75 W x 4 @ 4 Ω, 1,100 W x 1 @ 1 Ω Topology: Class AB / Class D Crossovers: 24 dB/Oct HP/LP Equalization: 0-12 dB @ 45 Hz Frequency Response (-3 dB): 20 Hz to 20 kHz S/N Ratio (CEA-2006 standard): >90 dB Dimensions: 22.6-in. (L) x 2.56-in. (H) x 9-in. (D)

Number of Channels: Four CEA-2006 Power: 90 W x4 @ 4 Ω, 120 W x 4 @ 2 Ω Topology: Class D Full Range Crossovers: Variable 12 db/Oct LP/HP Equalization: Subsonic filter (mono block only) Frequency Response (-3 dB): 20 Hz to 20 kHz S/N Ratio (CEA-2006 standard): N/A Dimensions: 6-in. (L) x 2-in. (H) x 3-in. (D)

PHOENIX GOLD SX1200.5 $550 | phoenixgold.com Number of Channels: Five CEA-2006 Power: 200 W x 4 @ 2 Ω, 125 W x 4 @ 4 Ω, 400 W x 1 @ 2 Ω, 250 W x 1 @ 4 Ω Topology: Class D Crossovers: LP/HP Equalization: N/A Frequency Response (-3 dB): 20 Hz – 20 kHz (±1 dB) S/N Ratio (CEA-2006 standard): >100 dB Dimensions: 12.3-in. (L) x 2-in. (H) x 6.9-in. (D)

PIONEER GMA-A5602 $150 | pioneerelectronics.com Number of Channels: Two CEA-2006 Power: 225 W Topology: Class B Crossovers: Variable LPF (40 Hz to 500 Hz) Equalization: N/A Frequency Response (-3 dB): 10 Hz to 70 kHz S/N Ratio (CEA-2006 standard): 96 dB Dimensions: 13.75-in. (L) x 2.38-in (H) x 8.5-in.(D)

SONY XM-GS400 $ 3 4 9 . 9 9 | s o n y. c a

ROCKFORD FOSGATE T400X4AD $499.99 | rockfordfosgate.com

Number of Channels: Four CEA-2006 Power: 70 W RMS x 4 @ 4 Ω, 80 W RMS x 4 @ 2 Ω, 160 W RMS x 2 @ 4 Ω Topology: Class D Crossovers: 12 dB/Oct HP/LP Equalization: Independent bass boost Frequency Response (-3 dB): 10 Hz – 100 kHz S/N Ratio (CEA-2006 standard): N/A Dimensions: 10.75-in (L) x 2.1-in. (H) x 8-in. (D)

Number of Channels: Four CEA-2006 Power: 100 W x 4 @ 4 Ω, 100 W x 4 @ 2 Ω Topology: Class A/D Crossovers: HP/LP Butterworth (12 dB/Oct) Equalization: Treble and bass equalization Frequency Response (-3 dB): 20 Hz – 20 kHz (±1 dB) S/N Ratio (CEA-2006 standard): N/A Dimensions: 8.3-in. (L) x 1.6-in. (H) x 4.25-in. (D)

POWERBASS XL-2200M $299.99 | powerbassusa.com Number of Channels: Two Rated Power: 100 W x 2 @ 4 Ω, 200 W x 2 @ 2 Ω Topology: Class D Crossovers: HP/LP Equalization: Switchable subwoofer EQ (0, +6, +12 dB) Frequency Response (-3 dB): 10 Hz – 40 kHz S/N Ratio (CEA-2006 standard): >85 dB Dimensions: 7.5-in. (L) x 1.6-in. (H) X 4.5-in. (D)

PASMAG

JUNE 2014

Hot NEW Products - AMPS.indd 4

2014-04-25 7:21 PM

Untitled-1 1

2014-04-24 10:02 AM

TRENDING

Mobile Electronics

Arc Audio

XDi 600.4 Amplifier

For an expanded version of this test report, go to pasmag.com/testreports/ArcAudio6004

MSRP: $479

FULL-RANGE HIGH POWER CLASS D DESIGN ELEGANT AND COMPACT DESIGNED AND ENGINEERED IN THE USA BUILT FOR BUDGETMINDED ENTHUSIASTS AND AUDIOPHILES ALIKE

This test report is also available on the PASMAG app. Download it for free from the App Store.

There are plenty of choices when it comes to selecting the right amp. The XDi Series from Arc Audio are designed to make the decision easier, with unquestioned sonic performance, comprehensive connection capabilities, a small physical footprint, and the genius of Robert Zeff. To quote Arc Audio’s product manager Brad Ott, “[the] XDi is simply Class D done right.” When you look at it that way, your decision might be a bit easier to make.

– Garry Springgay, PASMAG Technical Editor

MEASURED PERFORMANCE SPECIFICATIONS Signal to Noise Ratio referenced to 2 V output. (CEA-2006A) (1 W @ 4 ohms) Signal to Noise Ratio referenced to full output

-83.6 dBA -105.4 dBA

THD+N at rated 4 ohm power

0.67 %

CEA-2006A rated 4 ohm Power (minimum power per channel developed over the entire intended audio bandwidth)

150 W

Maximum Efficiency at full 4 ohm power per ch.

88.30 %

Maximum Efficiency at full 2 ohm power per ch.

71.70 %

Efficiency at 10 W per channel, 4 ohms

73.40 %

Idle Current Input Sensitivity

2.1 A 198 mV- 3.5 V

Maximum Current @ full power, lowest rated impedance

58.9 A

Manufacturers Rated Power

Actual Measured Power @ 1.0 % THD+N // @ 12.6 V Battery

Actual Measured Power @ 1.0 % THD+N // @ 14.4 V Battery

150 x 4 @ 4 Ω

115 x 4 @ 4 Ω

152 x 4 @ 4 Ω

High Pass Crossover

54 Hz – 506 Hz -12 dB/Oct

150 x 4 @ 2 Ω

155 x 4 @ 2 Ω

152 x 4 @ 2 Ω

Low Pass Crossover

52 Hz – 501 Hz -12 dB/Oct

301 x 2 @ 4 Ω

Subsonic Filter

TECHNICAL

DATA

300 x 2 @ 4 Ω

309 x 2 @ 4 Ω

The following power measurements were obtained using industry standard methods. (1 kHZ @ 1.0 % THD+N - Battery voltages shown +/- 0.2 V)

Frequency Response (-3 dB)

Bass boost

<10 Hz – >32 kHz

None +12 dB @ 46 Hz

DD Audio

M45 Amplifier MSRP: $259

SMALL CHASSIS HIGH POWER OUTPUT WHEN COMPARED TO SIMILARSIZED AMPS COMES WITH A REMOTE GAIN KNOB WITH CLIPPING INDICATOR COMBINES AFFORDABILITY WITH HIGH QUALITY INTERNAL COMPONENTS

“The new Digital Designs M45 looks like a winner. With a tiny footprint and the power and performance of a much larger amplifier, combined with the reasonable price, it’s a safe to say these amps are going to fly off the shelves. If you’re in the market for a small but powerful amplifier that represents great value, check out one of these little babies for yourself at a Digital Designs dealer near you.”

– Garry Springgay, PASMAG Technical Editor

For an expanded version of this test report, go to pasmag.com/testreports/DigitalDesignsM45 MEASURED PERFORMANCE SPECIFICATIONS Signal-to-Noise Ratio referenced to 2 V output (CEA-2006A) (1 W @ 4 ohms)

-77.4 dBA

Signal-to-Noise Ratio referenced to full output

-99.6 dBA

THD+N at rated power Maximum Efficiency at full 2 ohm power per ch. Idle Current Input Sensitivity Maximum Current @ full power, lowest rated impedance

Manufacturers Rated Power TECHNICAL

DATA

Actual Measured Power @ 1.0 % THD+N // @ 12.6 V Battery

Actual Measured Power @ 1.0 % THD+N // @ 14.4 V Battery

160 W @ 4 Ω (14.4 V)

129 x 1 @ 4 Ω

168 x 1 @ 4 Ω

300 W @ 2 Ω (14.4 V)

241 x 1 @ 2 Ω

314 x 1 @ 2 Ω

500 W @ 1 Ω (14.4 V)

401 x 1 @ 1 Ω

510 x 1 @ 1 Ω

The following power measurements were obtained using industry standard methods. (1 kHZ @ 1.0 % THD+N - Battery voltages shown +/- 0.2 V)

PASMAG

Frequency Response (-3 dB) High Pass Crossover (Subsonic Filter) Low Pass Crossover

0.085 % 82.2 % 0.8 A 247 mV- 8.3 V 52.2 A 18 Hz – 255 Hz 18 Hz – 55 Hz -12 dB/oct 50 Hz – 255 Hz -12 dB/oct

Bass EQ boost

N/A

Phase Adjustment (degrees of shift @ 100 Hz)

N/A

JUNE 2014

Trending Arc Audio-DD Audio Test Reports 16.03-June.indd 1

2014-04-25 5:16 PM

C.L.E.A.N.

(Calibrated Level Eliminates Audible Noise)

Time and sophisticated test equipment have been replaced with Rockford’s integrated level setting technology called CLEAN.

VIEW VIDEOS Scan the QR code to view a CLEAN setup video and other information regarding Rockford Fosgate’s Punch amplifiers. http://blog.rockfordfosgate.com/product/ads/2014-punch-amps/

Untitled-1 1

rockfordfosgate.com • 800.366.2349

12/10/2013 5:27 PM

TRENDING

Focal

Mobile Electronics

FPD 600.4 Amplifier MSRP: $599

“The new FPD series of amplifiers follow a long Focal tradition of highperformance gear with a focus on sound quality. It is designed for the ultimate in system flexibility, offering unique crossover configuration capabilities and some handy input signal steering that makes it easy to connect to virtually any system design. The FPD 600.4 sells for about $599, and based on build quality and performance, it’s worth every penny.”

ONE OF THE MOST FLEXIBLE FOURCHANNEL AMPS ON THE MARKET CAN RUN A TWO-WAY ACTIVE COMPONENT KIT WITH INTERNAL CROSSOVERS POWER LED ON REMOTE SUB CONTROL FLASHES RED LED TO INDICATE CLIPPING SQ-SOUNDING AMP AT A REASONABLE PRICE

– Garry Springgay, PASMAG Technical Editor

CLEAN, NO-VISIBLE MOUNT

This test report is also available on the PASMAG app. Download it for free from the App Store.

For an expanded version of this test report, go to pasmag.com/testreports/Focal6004 MEASURED PERFORMANCE SPECIFICATIONS Signal to Noise Ratio referenced to 2 V output. (CEA-2006A) (1 watt @ 4 ohms)

-93.3 dBA

Signal-to-Noise Ratio referenced to full output

-115.1 dBA

THD+N at rated 4 ohm power

0.77 %

Maximum Efficiency at full 4 ohm power per ch.

82.4 %

Maximum Efficiency at full 2 ohm power per ch.

63.4 %

Efficiency at 10 watts per channel, 4 ohms

60.4 %

Idle Current Input Sensitivity Maximum Current @ full power, lowest rated impedance

Manufacturers Rated Power TECHNICAL

DATA

Actual Measured Power @ 1.0 % THD+N // @ 12.6 V Battery

Actual Measured Power @ 1.0 % THD+N // @ 14.4 V Battery

Frequency Response (-3 dB)

0.8 A 240 mV- 9.4 V 102.1 A <10 Hz – 43 kHz

High Pass Crossover

50 Hz – 4 kHz -12 dB/Oct 50 Hz – 4 kHz -12 dB/Oct

150 x 4 @ 4 Ω

154 x 4 @ 4 Ω

157 x 4 @ 4 Ω

200 x 4 @ 2 Ω

180 x 4 @ 2 Ω

233 x 4 @ 2 Ω

Low Pass Crossover

400 x 2 @ 4 Ω

348 x 2 @ 4 Ω

423 x 2 @ 4 Ω

Subsonic Filter

None

Bass boost

None

The following power measurements were obtained using industry standard methods. (1 kHZ @ 1.0% THD+N - Battery voltages shown +/- 0.2 V)

Untitled-4 16.03 TEST1REPORT Focal FPD Amp line v2.indd 1

2014-04-10 2014-04-25 12:02 5:22 PM

Winter is over!

Visit your authorized JL Audio retailer and get ready to roll with great audio on-board.

How we play.â&#x201E;˘ ÂŠ 2014 JL Audio, Inc. For more information on all JL Audio products, please visit your local authorized dealer or www.jlaudio.com.

SpringTuneUp-PAS-020714.indd 1 Untitled-1 1

2/7/14 4:33 PM 2/10/2014 3:59 PM

TRENDING

s r e f o o w b u S

ALPINE SWT-10S2

BLUES AUDIO BW-10D

AUDIOPIPE TS-PP2-12-D4

$269 | alpine-canada.com

$79.99 | bluesaudiousa.com

Contact for pricing | audiopipe.com

Diameter: 10-in. Impedance: 2 Ω Power: 350 W RMS (1,000 W Peak) Mounting Depth: 4.19-in. Cone & Surround: Kevlar-reinforced pulp cone with HAMRS Santoprene rubber surround VC Former Material: 2.5-in. diameter aluminum former Basket: Stamped steel basket

Diameter: 10-in. Impedance: 4 Ω Power: 200 W RMS (800 W Peak) Mounting Depth: 5.25-in. Cone & Surround: Poly-coated cone & butyl rubber surround VC Former Material: N/A Basket: Rolled steel

Diameter: 12-in. Impedance: Dual 4 Ω Power: 300 W RMS (1,000 W Peak) Mounting Depth: 5.6-in. Cone & Surround: PP Cone with rubber surround VC Former Material: Four-layer Kapton voice coil Basket: Rigid steel frame

ARC AUDIO 12V2

AMERICAN BASS RX-1244

CLARION WG3020D

$459 | arcaudio.com

$269 | americanbassusa.com

$199.99 | clarion.com/us

Diameter: 12-in. Impedance: Dual 2 Ω, dual 4 Ω Power: 500 W RMS (1,000 W Peak) Mounting Depth: 6.13-in. Cone & Surround: Low shore progressive SLA rubber surround VC Former Material: Non-conductive machined fibreglass composite Basket: High-pressure cast CNC-cut aluminum

Diameter: 12-in. Impedance: Dual 4 Ω Power: 600 W RMS Mounting Depth: 7.17-in. Cone & Surround: Stitched rubber surround, fiberglass-reinforced cone VC Former Material: Aluminum Basket: Cast frame

Diameter: 12-in. Impedance: Dual 4 Ω Power: 300 W RMS (1,000 W Peak) Mounting Depth: 5.88-in. Cone & Surround: Reinforced FRP, paper cone with Nitrile Butadience rubber high-excursion surround VC Former Material: N/A Basket: Custom stamped steel powdercoated chassis

PASMAG

JUNE 2014

Hot NEW Products - SUBS.indd 2

2014-04-25 7:53 PM

INTEGRATE ready-made solutions for adding the thump you want and the control you need. KICKER Powered Subwoofers provide an intense result – trust us.

The Hideaway™ compact powered subwoofer delivers surprising low-frequency output from a remarkably small enclosure.

Shop for the Hideaway online at www.kicker.com, or visit your local authorized retailer. KICKER is distributed in Canada by Gem-Sen. www.gemsen.com www.kicker.com

14_PAS-HIDEAWAY.indd 1 Untitled-2 1

/kickeraudio

3/25/14 1:47 PM 2014-04-07 3:10 PM

TRENDING

s r e f o o w b u S

AUDIOMOBILE GTS 2110 S2

DD AUDIO 608

KENWOOD KFC-XW12

$249.95 | automobile.net

$189 | ddaudio.com

Contact for pricing | kenwood.com

Diameter: 10-in. Impedance: 2 Ω Power: 400 W RMS (800 W Peak) Mounting Depth: 4.5-in. Cone & Surround: Composite laminated sandwich VC Former Material: Kapton Basket: Custom-tooled, 6-spoke steel

Diameter: 8-in. Impedance: Dual 2 Ω, dual 4 Ω Power: 300-600 W RMS (1,800 W Peak) Mounting Depth: 5.5-in. Cone & Surround: Non-pressed paper cone, foam EROM surround VC Former Material: Aluminum Basket: Cast aluminum

Diameter: 12-in. Impedance: 4 Ω Power: 400 W RMS (1,200 W Peak) Mounting Depth: 6-in. Cone & Surround: Square-array polypropylene cone, rubber surround VC Former Material: N/A Basket: Steel

JL AUDIO 12TW3-D4

KICKER COMPRT10

HIFONICS BRX12D4

$399.95 | jlaudio.com

$ 1 6 9 . 9 5 | k i c ke r. c o m

$179.99 | hifonics.com

Diameter: 12-in. Impedance: Dual 4 Ω Power: 400 W RMS Mounting Depth: 3.5-in. Cone & Surround: Mineral-filled polypropylene cone with rubber surround VC Former Material: Kapton Basket: Cast alloy

Diameter: 10-in. Impedance: 1 Ω, 2 Ω Power: 600 W RMS (1,200 W Peak) Mounting Depth: 8.8-in. Cone & Surround: Injection-molded polypropylene cone, Santoprene surround VC Former Material: N/A Basket: Sealed steel

Diameter: 12-in. Impedance: Dual 4 Ω Power: 450 W RMS (900 W Peak) Mounting Depth: 5.69-in. Cone & Surround: Woven-pressed polypropylene cone, butyl rubber surround VC Former Material: Vented aluminum Basket: Deep-drawn stamped steel

PASMAG

JUNE 2014

Hot NEW Products - SUBS.indd 3

2014-04-25 7:53 PM

In Canada

888-557-8278 I www.automob.ca

MB Quart_v2.indd 1

2014-04-04 3:33 PM

TRENDING

s r e f o o w b u S

MB QUART RWM304

ORION XTR154D

FOCAL ACCESS 30A4

$139.99 | mbquart.com

Contact for pricing | info@mdaudio.net

$199.99 | focal.com

Diameter: 12-in. Impedance: Dual 2 Ω, dual 4 Ω Power: 350 RMS (700 W Peak) Mounting Depth: 4.83-in. Cone & Surround: Thermal-formed polypropylene cone, UV butyl rubber surround VC Former Material: Vented aluminum Basket: Deep-drawn, heavy-gauge stamped steel

Diameter: 15-in. Impedance: 4 Ω Power: 750 W RMS (3,000 W Peak) Mounting Depth: 7.24-in. Cone & Surround: Paper cone, oversized nitrile-butadiene rubber surround VC Former Material: Aluminum Basket: Aluminum

Diameter: 12-in. Impedance: 4 Ω Power: 250 W RMS (500 W Peak) Mounting Depth: N/A Cone & Surround: Dual fibreglass structure cone, butyle rubber surround VC Former Material: Kapton Basket: N/A

ROCKFORD FOSGATE P3D2-12

SONY XS-GS80L

LIGHTNING AUDIO L0-S412

$249.99 | rockfordfosgate.com

$ 8 9 . 9 9 | s o n y. c a

$64.95 | 1-888-881-8186

Diameter: 12-in. Impedance: Dual 2 Ω Power: 600 W RMS Mounting Depth: 6.66-in. Cone & Surround: Anodized aluminum cone, santoprene surround VC Former Material: Anodized aluminum Basket: Stamp cast

Diameter: 8-in. Impedance: 4 Ω Power: 280 W RMS (900 W Peak) Mounting Depth: 3.8-in. Cone & Surround: Mica-reinforced cellular glass fiber honeycomb cone, butyl rubber surround VC Former Material: N/A Basket: N/A

Diameter: 12-in. Impedance: 4 Ω Power: 150 W RMS (300 W Peak) Mounting Depth: 4.92-in. Cone & Surround: Polypropylene cone, foam surround VC Former Material: Anodized aluminum Basket: Stamped

PASMAG

JUNE 2014

Hot NEW Products - SUBS.indd 4

2014-04-25 8:52 PM

Philips Vision, VisionPlus and X-tremeVision upgrade headlights Philips upgrade headlights deliver 30%, 60%, or even up to 100% more light on the road. More light at night makes driving safer and more enjoyable. Get the headlight that’s right for the way you drive – from Philips. To learn more call 1-800-257-6054 www.philips.com/automotive

Vision

MEMPHIS CAR AUDIO 15-SA12D4 Contact for pricing | memphiscaraudio.com Diameter: 12-in. Impedance: Dual 4 Ω Power: 250 W RMS (500 W Peak) Mounting Depth: 3.88-in. Cone & Surround: Honeycomb carbon cone, butyl rubber surround VC Former Material: N/A Basket: Vented aluminum

+30%

more light

VisionPlus

+60% more light

X-tremeVision up to

+100% more light

Vision, VisionPlus and X-tremeVision Upgrade Headlights

PL1342_PAS_Mag_BulbUpgrades_HalfPageV_6-14_v1.indd 1

3/24/14 4:20 PM

PIONEER TS-SW3002S4 $180 | pioneerelectronics.com Diameter: 12-in. Impedance: Dual 4 Ω Power: 400 W RMS Mounting Depth: 3.38-in. Cone & Surround: Mica-reinforced injection molded polypropylene resin cone VC Former Material: Four-layer, heat-resistant polyester resin Basket: Cast aluminum

Hot NEW Products - SUBS.indd 5

S U B S C R I B E O N L I N E N O W AT WWW.PASMAG.COM/SUBSCRIBE FACEBOOK.COM/PASMAG

TWITTER.COM/PASMAG

INSTAGRAM.COM/PASMAG

YOUTUBE.COM/PASNATION

2014-04-25 8:52 PM

TRENDING

This test report is also available on the PASMAG app. Download it for free from the App Store.

Mobile Electronics

Memphis

SRX12D4 Subwoofer MSRP: $81.95

BASS THAT’S BIGGER THAN YOUR WALLET LOUD & PROUD FOR THE ENTRY-LEVEL BUYER INJECTION-MOLDED POLYPROPYLENE CONES FOR TIGHT, ACCURATE BASS RESPONSE BUTYL RUBBER SURROUNDS FOR FLEXIBILITY IN A VARIETY OF ENCLOSURES WOVEN TINSEL LEADS FOR EXTENDED DURABILITY

Power Handling

“At the end of the day, there is no denying that this is unquestionably a lot of woofer for the money. I find the Memphis Car Audio SRX12D4 to be a surprising performer, and a woofer that, when in the right enclosure, just might prove to be all you really need. Sure, there are woofers that handle more power or have more exotic construction, but with this one you’ll save enough cash to fill your car with fuel and spend some quality time rolling down the highway listening to your tunes. On that note, I suggest you roll over to your local Memphis Car Audio dealer and check these subs out for yourself. You won’t be sorry.”

MEASURED SPECIFICATIONS COILS IN PARALLEL

250 W RMS

QUICK

Frequency Range

20 Hz – 400 Hz

SPECS

Sensitivity

85.1 dB/SPL @ 1.0 W (1.414 V @ 2 ohms)

TECH

For an expanded version of this test report, go to pasmag.com/testreports/MemphisSRX12D4.

– Garry Springgay, PASMAG Technical Editor

Nominal Impedance (2) 4 ohm coils

Revc= Fo= Sd=

1.74 ohm

Mmd=

104.939 g

Qts=

32.2 Hz

Mms=

117.526 g

Levc=

BL=

5.857 T·M

0.049 M2

0.999 0.883 mH

No=

0.195 %

Vas=

73.02 L or 2.58 Ft3

Qms=

5.779

SPLo=

85.09 dB

Cms=

0.207 mm/N

Qes=

1.207

EBP=

26.67

Phoenix Gold

SX112d4 Subwoofer MSRP: $300

INNOVATIVE DESIGN AND TECHNOLOGY HIGH-TEMPERATURE 2.5-INCH VOICE COILS HIGH-EXCURSION CAE/CAD MOTOR DESIGN LONG-THROW SPIDER SUSPENSION 35 MM OF PEAK-TO-PEAK EXCURSION

“With the SX series of woofers, Phoenix Gold has created a very flexible subwoofer line that will appeal to a wide variety of customers. The SX112d4 proves it will work with anything from a very high quality SQ system to a boulevard boomer. It’s also offered at a reasonable price that will fit into a wide range of budgets, making it a serious contender in the category.”

– Garry Springgay, PASMAG Technical Editor For an expanded version of this test report, go to pasmag.com/testreports/PhoenixGoldSX112d4.

Power Handling

50-500 W continuous

QUICK

Frequency Range

30-500 Hz

SPECS

Driver Sensitivity

83.4 dB/SPL @ 1.0 W

TECH

Nominal Impedance (2) 4 ohm coils

PASMAG

MEASURED SPECIFICATIONS COILS IN PARALLEL

Revc= Fo= Sd=

1.94 ohm

Mmd=

245.417 g

Qts=

32.2 Hz

Mms=

258.432 g

Levc=

BL=

10.95 T·M

0.051 M2

0.757 1.742 mH

No=

0.132 %

Vas=

31.4 L or 1.11 Ft3

Qms=

5.034

SPLo=

83.4 dB

Cms=

0.085 mm/N

Qes=

0.891

EBP=

38.05

JUNE 2014

Trending Memphis-AAMP Test Reports 16.03-June.indd 1

2014-04-25 5:29 PM

Untitled-1 1

2014-04-15 3:43 PM

TRENDING

AVO TURBOWORLD STAGE 1 TURBOCHARGER KIT FOR SCION FR-S AND SUBARU BRZ $4,500 | avoturboworld.com The AVO Stage 1 Turbocharger Kit will increase output to 250-300 wheel horsepower depending on the package you choose. Low mounted with mechanical oil scavenge pump for OEM reliability and the best low-end response and torque on the market! Thoroughly tested in countries around the globe!

Fnodrucecdtion I PRECISION TURBO & ENGINE GEN2 6266 CEA TURBOCHARGER $ 1 ,74 9 . 9 9 | p re c i s i o n t u r b o . n et With an exclusive 62 mm GEN2 CEA compressor wheel and 66 mm CEA turbine wheel, PTE’s all new PT6266 CEA turbocharger offers unparalleled performance, efficiency, less turbo lag, and massive power gains over older designs. Rated to support 800 horsepower and purpose-built for improved strength and longevity, all PT6266 CEA turbos are equipped with an air-cooled, dual ceramic ball bearing for faster transient response and added thrust capacity.

MISHIMOTO SUBARU WRX/STI PERFORMANCE TOPMOUNT INTERCOOLER KIT (2002–07)

GARRETT GTX4088R TURBOCHARGER Contact for pricing | turbobygarrett.com

$725 | mishimoto.com This kit provides a unique option for upgrading your charge air system, using a high efficiency bar-and-plate core which provides increased volume and improved heat transfer. Completely bolt-on, it requires zero modifications and includes all hardware for vehicles pushing up to 305 horsepower. Lifetime warranty included.

The Garrett GTX4088R is meant for builders who are seeking outputs as high as 850 horsepower. Featuring Garrett’s machined GTX compressor wheel, the turbo also features all-new aerodynamics and dual ceramic ball bearings. The GTX4088R is ideal for anyone who has maximized the GTX3582R and are ready for more power.

FULL-RACE EFR INTERNAL WASTEGATE TURBO KIT $1,999 | full-race.com Full-Race Turbo Kits spool faster and produce more power across the entire RPM range. Only Full-Race offers BorgWarner EFR Internally Wastegated Turbo Kits for the Honda Civic Si, S2000, Mitsubishi Evolution 8, 9 and 10, Subaru WRX/STI, Mazdaspeed3, 6 and more. Made in the USA.

PASMAG

STS TURBO, INC. SCION FR-S/SUBARU BRZ BOLT-ON TURBO SYSTEM

TURBONETICS SUBARU WRX / STI INTERCOOLER KIT (2001-07)

$4,695 - $6,995 | ststurbo.com

Contact for pricing | turboneticsinc.com

The new STS Turbo system will deliver 150+ wheel horsepower and lb-ft of torque, phenomenal response, fuel economy, and a totally unique sound. There are no added underhood temperatures and no change in ground clearance, so you can drive your FR-S/BRZ with confidence!

The Spearco WRX intercooler kit from Turbonetics features the largest air-to-air top mount intercooler on the market. Utilizing the factory mounts, the massive 4.5-inch unit bolts on easily without any modifications to the vehicle. Factory turbo piping and blow-off valves bolt on easily with standard hand tools. Backed by a one-year, no fault, no hassle warranty.

JUNE 2014

Hot NEW Products - Forced Induction.indd 2

2014-04-25 8:28 PM

LETâ&#x20AC;&#x2122;S MAKE IT A FORMULA DRIFT CHAMPIONSHIP THREEPEAT!

FOR 10% OFF

USE COUPON CODE

PASTUNE

MEMBERSOF

NOT VALID IN CONJUNCTION WITH ANY OTHER OFFER

OFFER EXPIRES DEC 31st 2014

WWW.GARRETTGEAR.COM

IF L O B #TUR

POW @turb

obyg

arret

ERIN /TUR

BOlife

NOVA TOR @turb

obyg

arret

#T R #tuU rboBbOlife ygarr ett

The Official Sponsor of:

Untitled-6 1

2014-03-13 3:51 PM

TRENDING

Forced Induction

HKS HONDA S2000 GT SUPERCHARGER PRO KIT $ 4 , 7 2 5 | m o t o v i c i t y. c o m / h k s With F1-level piston speed and high rpm characteristics, the S2000 is a great representation of Japanese sports cars. The HKS GT Supercharger Pro Kit compliments these to deliver more power as engine rpms increase, creating a forced induction system Honda lovers will admire. The HKS GT Supercharger Pro Kit fits on AP1 and AP2, but requires different fuel upgrades, and tuning with Hondata base maps available.

TURBOSMART DUAL PORT UNIVERSAL 38 MM BLOW-OFF VALVE

DEATSCHWERKS BRZ/FR-S FUEL INJECTORS

$365.91 | turbosmart.com

From $329 | deatschwerks.com

Four BOVs in one. The Dual Port can be configured as a supersonic, megasonic, plumb back or dual port! Features sequential ports for quiet operation on mild boost and full performance at full boost. With a quickrelease V-band clamp, tool-free adjustment, and all the parts for conversions included, this is Turbosmartâ&#x20AC;&#x2122;s most versatile BOV. Suits medium sized turbocharger systems on four- to six-cylinder engines developing 200 to 600 horsepower.

DeatschWerks BRZ/FR-S port injectors are capable of propelling the stock BRZ/FR-S to over 500 horsepower. Available in 450 cc, 700 cc and 900 cc sizes to fit all needs. These are EV14 compact injectors, so they have drop-in fitment, which dramatically simplifies installation. As with all DW injector sets, the BRZ/FR-S injectors are flow-balanced, E85-compatible and include a three-year warranty and full tuning data.

PRECISION TURBO & ENGINE X275 CLASS LEGAL GEN2 PRO MOD 85 TURBOCHARGER $4,899.99 | PrecisionTurbo.net Featuring Precisionâ&#x20AC;&#x2122;s exclusive Competition Engineered Aerodynamics (CEA) on both the compressor and turbine, the new X275 turbo offers unparalleled performance, greater efficiency, less lag, and massive power gains over older designs of similar sizes. Purpose-built for the X275 class and rated to support 1,550 horsepower, this turbo features an air-cooled, dual ceramic ball bearing CHRA for faster transient response and added thrust capacity.

VORTECH SUPERCHARGERS 2011-2014 FORD MUSTANG GT SUPERCHARGING SYSTEM From $4,963.99 | vortechsuperchargers.com Get more power throughout the entire powerband and rocket your 5.0L to 605 horsepower at only 8 psi of safe, efficient intercooled boost! Complete systems are 50-State emissions legal and include everything you need to take your Coyotepowered Mustang to the next level. Includes V-3 Si supercharger and is air-to-air intercooled. Tuner kits start at $4,963.99 and complete systems start at $6,010.99.

PASMAG

DEZOD MOTORSPORTS SCION TC2 TURBOCHARGER SYSTEM $4,549 | dezod.com The Dezod turbo system delivers 8.5 pounds of boost and raises tC horsepower to 285 and torque to 273 lb-ft at the wheels. The system includes a Garrett turbo, charge piping, front-mount intercooler, TiAL wastegate, TiAL blow-off valve, turbo installation kit, upgraded fuel injectors, air intake system, oil feed & drain lines, AEM engine management system with base fuel and spark maps and all necessary clamps and couplers. Featured in the 2013 Scion Tuner Challenge!

JUNE 2014

Hot NEW Products - Forced Induction.indd 3

2014-04-25 8:29 PM

Untitled-6 1

2014-03-13 3:42 PM

TRENDING

Forced Induction APR AUDI B7 RS4 STAGE III+ TVS1740 SUPERCHARGER SYSTEM

VORTECH SUPERCHARGERS FR-S/BRZ/GT86 SUPERCHARGING SYSTEMS

APR AUDI B8 S5 STAGE III+ TVS1740 SUPERCHARGER SYSTEM

$ 1 7, 7 4 9 . 9 9 | g o a p r . c o m

From $4,613.99 | vortechsuperchargers.com

$ 1 4 ,74 9 . 9 9 | g o a p r. c o m

The APR Stage III+ TVS1740 Supercharger System adds roughly 40% more horsepower and torque across the entire power band. The results are nothing short of amazing, taking the RS4 from 414 horsepower to 626 on pump fuel and 688 on race fuel! With more than 500 lb-ft on tap thanks to the TVS1740’s positive displacement supercharger, expect instant acceleration without the lag commonly associated with other forms of forced induction.

Designed specifically for the FA20 engine, the Vortech system outperforms all other types of forced induction for the GT86 platform. Where other brands fall flat at the top end or have boost lag, the Vortech centrifugal system compliments the existing powerband for more power everywhere and no heat soak! Easily upgradable, make even more power without major changes to the supercharger head unit. System includes a V-3 H67B supercharger and is air-to-air intercooled.

In factory form, Audi’s S5 4.2L FSI V8 leaves much to be desired compared to recent S models. The APR Stage III+ TVS1740 Supercharger System fills the void by adding roughly 45% more horsepower and torque across the entire power band. The results are nothing short of amazing, taking the S5 from 353 horsepower to 589 on pump fuel and 635 horsepower on race fuel without breaking a sweat!

DEATSCHWERKS V2 DW300 FUEL PUMP $169 | deatschwerks.com The new DW300 pump flows 26% more at its peak and 20% more on average across all pressures. Increases in flow were specifically engineered for high pressures (60-90 psi), where forced induction applications need it the most. Fuel flow has been limited at low pressures (30-50 psi) to minimize heat generation in return fuel systems. This dual zone approach results in a flatter flow curve, which maximizes both performance and reliability for supercharged or turbocharged applications. E85-compatible and includes a three-year warranty.

TURBOKITS.COM GENESIS COUPE V6 SINGLE TURBO KIT FOR 6MT & 6AT

TREADSTONE EFR TURBO KIT FOR SCION FR-S/SUBARU BRZ

$6,495 | turbokits.com

$4,899.95 | treadstoneperformance.com

Have a 3.8L Hyundai Genesis and want gobs of power? TurboKits.com offers a beautifully crafted bolt-on “horsepower in a box” turbo system aimed at enthusiasts looking to maximize the performance, sound, and thrill of driving a 500 horsepower street car.

The Treadstone EFR turbo kit was years in the making. It gives you the best product combination, installation, fitment and function. Utilizing BorgWarner’s latest release, the EFR (engineered for Race) series turbocharger (6258, 6758 or 7163), utilizes advanced engineering, giving you the latest in technology for autocross, rally, drift, road racing and even street use. Comes with an electronic boost control solenoid, EcuTek ECU reflash for MAF/MAP readings, intercooler, DEI custom-fit titanium turbo heat shield, all piping and hardware!

PASMAG

JUNE 2014

Hot NEW Products - Forced Induction.indd 4

2014-04-25 8:30 PM

Untitled-1 1

2014-04-10 11:58 AM

TRENDING

n o i s n e p s u S & Chassis AIRREX AIR SUSPENSION AIR SUSPENSION SYSTEM FOR SCION XA, XB, TC, XD, FR-S (ALL YEARS) F r o m $ 2 , 3 5 0 | a i r w e r k s u s a . c o m AirREX Air Suspension combines the track-minded coilover with a show car air suspension setup. Every kit comes with 12-way adjustable monotube dampers, fully threaded to allow for 2 inches of static travel. Using synthetic rubber air springs allows for an additional 3 to 5 inches of travel. Application based kits allow for simple/user-friendly installation. Spherical pillow ball mount/camber plate upgrades available on certain models.

APEX SUSPENSION LOWERING SPRINGS Contact for pricing | directautoimport.com

BLITZ DAMPER ZZ-R COILOVER From $1,505 | optionsauto.com/blitz | blitzpowerusa.com The Blitz Damper ZZ-R is a single monotube design coilover with 32-way adjustable damper rates. They include aluminum upper mounts to achieve better handling and precise control. With a wide range of adjustment, driving performance and ride comfort are maintained at the highest level regardless of speed and driving condition.

If you’ve never heard of Apex Suspension Systems, consider this your introduction. It all began in Holland, manufacturing coil springs for Group A Touring cars. Owners of street and track vehicles alike are now able to benefit from Apex’s race-proven designs.

D2 RACING SL COILOVERS $ 1 ,4 0 0 | www. d 2 ra c i n g . c o m The SL Series from D2 Racing is specifically designed to give you the lowest possible ride height while retaining the benefits of a full monotube coilover system. The SL Series features specially designed mounts, shorter stroke shock bodies, 36-way adjustable dampers and custom spring rates - allowing you to slam your car more than ever before. This coilover system can lower the vehicle up to 2-inches more than D2’s RS Series coilover.

PASMAG

DREADNOUGHT PRO 2- & 3-WAY DAMPERS Contact for pricing | fortune-auto.com Dreadnought’s PRO 2- and 3-way dampers (independent bump and rebound adjustable) are the foundation of a race-winning suspension. Designed and tested on the race track for the harshest environment possible. Offering toptier race technology and durable race-proven parts, PRO damper systems are the ultimate in performance and adjustability. All systems are completely built in-house by our engineering staff in Richmond, Virginia.

KW SUSPENSIONS 2013+ AUDI S3 COILOVER VARIANTS From $1,519.99 | kw-suspension.com The KW coilover suspension for the 2013+ Audi S3 enables owners to lower their vehicle 0-30 mm on the front and 5-30 mm on the rear axle, while retaining enough travel to handle maximum and dynamic loads during driving. Variant 1 has preset dampening rates for lowering. Variant 2 allows modifications in ride height and rebound dampening. Variant 3 permits adjustable (and independent reacting) rebound and compression damping with height adjustability.

JUNE 2014

Hot NEW Products - Suspension_v2.indd 2

2014-04-25 8:24 PM

Untitled-2 1

2014-04-07 3:33 PM

TRENDING

NEO MOTORSPORT VOLKSWAGEN GOLF VI RACING GREEN DAMPERS $1,499 | neo-motorsport.com NEO’s DMCC and GT-Challenge experience led them to develop the Racing Green dampers, specifically developed for the avid driver. Spring rate and damping force are specially tuned to increase control in absurd situations. Heavy duty spherical bearings offer greater feedback by eliminating the deflections in the rubber bushing. On McPhearson strut-type suspension, a 10 mm thick camber plate is incorporated to fine tune the car’s handling characteristic.

ISC SUSPENSION FR-S/BRZ N1 COILOVERS $1,250 | iscsuspension-na.com The ISC N1 coilover is the optimum suspension tool for improving handling on your street or weekend track car. This product is perfect for someone looking for performance and adjustability. Their in-house development allows ISC to have top-grade quality control and innovative R&D capabilities, which transfer directly to your car.

MEGAN RACING STREET-LP SERIES 2013+ LEXUS GS350 RWD COILOVER DAMPER KIT $999 | meganracing.com Megan Racing coilover dampers are the ultimate upgrade to your track or street ride. Featuring 32 levels of damper adjustment, separate spring perch heights and shock lengths. The wide range of adjustment lets you retain your factory ride-height, or tune for stance or on-track performance.

2000-2009 HONDA S2000 AP1 & AP2 · Front & rear control arm bushing sets · Front & rear sway bar bushing sets · Rear differential carrier bushings & tie rod boots.

Hot NEW Products Energy_v1.indd 1 - Suspension_v2.indd 3

2014-04-25 1:40 8:25 PM PM 2014-02-14

peCnshiaosnsis Sus& RACELAND HONDA S2000 COILOVERS

HSD MONOPRO COILOVER

$469 | raceland.com

Contact for pricing | hsdcoilovers.com

The Raceland S2000 coilovers give owners the ability to lower ride heights 1 to 3 inches below OEM specifications while offering separate spring pre-loads for ultimate comfort and performance. The adjustable spindle mounts ensure shock travel is not compromised with height adjustments.

The HSD MonoPro coilover is exactly what the performance tuning scene has been crying out for. The MP series coilovers offer the most features and the best quality for under $1350. HSD Coilovers use a Monotube damper design favoured by high end suspension companies and each kit is TUV approved. This level of quality and performance is usually found on much more expensive suspension products.

SUPERPRO SUSPENSION FRONT & REAR SWAY BAR KIT FOR SCION FR-S/SUBARU BRZ Contact for pricing | p1performance.com This single kit contains two bars and four bushings. Comes with a true lifetime warranty. Made in Australia.

CLEAN UP WITH RED LINE. • PACKED WITH DETERGENTS • MORE POWER & BETTER MILEAGE • CLEANS EMISSIONS SYSTEM • CONCENTRATED FORMULA

800.624.7958 | REDLINEOIL.COM

1:40 PM

Hot NEW Products Untitled-3 1 - Suspension_v3.indd 4 RPM_SI-1_PASMAG.indd 1

2014-04-28 2014-04-15 11:02 4:05 PM AM 4/11/14 4:34 PM

TRENDING

n o i s n e p s u S & Chassis TEIN EDFC ACTIVE PRO CONTROLLER

SPC PERFORMANCE HONDA CIVIC/ACURA CSX & ILX ADJUSTABLE REAR CAMBER ARM Contact for pricing | spcperformance.com SPC’s adjustable control arm allows rear camber changes on Honda’s eighth and ninth generation Civics as well as Acura CSX and ILX. The unique design permits on-car adjustments of ±3˚ of camber and is adjustable for life. Forged steel design adds durability to the arm without any weight penalty versus OEM.

$634 | tein.com

STABILA VOLKSWAGEN & AUDI 25 MM FRONT AND REAR SWAY BAR STREET KIT $399.99 | blackforestindustries.com These Stabila Street sway bars are available as a complete kit for both front and rear for your MK5 or MK6, or Audi 8P A3 and MK2 Audi TT. Made from 25 mm solid spring steel, our sway bars keep your VW or Audi as level and controlled as possible without any potential for failure, unlike less rigid hollow sway bars.

The new EDFC Active Pro is the most complete electronic damping force controller ever, offering damping changes in real-time based on g-force loading under acceleration, braking, and cornering. Each corner is now independently tuned based on these factors. Also includes a signal converter to link to the factory ECU speed signal for speed-based damping control, as well as for other external input (hand brake, external switch, etc).

TRUHART STREETPLUS COILOVERS $590 | truhartusa.com

TEIN MONO SPORT DAMPERS $1,650 | tein.com

Featuring a full monotube design with integrated aluminum top mounts, the StreetPlus coilover is an ideal solution for today’s budget-minded tuner looking to lower their vehicle and increase handling performance. The independently adjustable lower mount allows fine tuning of a vehicle’s height without sacrificing shock travel, resulting in a sporty yet comfortable ride, on the street or strip.

The new Mono Sport dampers from TEIN carry over the nowtraditional features such as full-length adjustability, 16-way damping adjustment and pillowball upper mounts. They also include the newly developed Advance Needle and Advance M.S.V., offering the most in suspension tuning for both comfort and sport handling. Available in two different models (Mono Sport and Mono Sport Touring) depending on vehicle type.

WHITELINE BMK010 EVOLUTION X ANTI-SWAY BAR KIT $599.90 | whitelineus.com WHITELINE’s Anti-Sway Bar Kit provides a 20% improvement in sway reduction for the Mitsubishi Evolution 10. The kit features three-point adjustable front and rear bars for quick on-track adjustments. Includes lifetime warrantied synthetic elastomer bushings, lateral locks and premium on-car adjustable end-links.

PASMAG

JUNE 2014

Hot NEW Products - Suspension_v2.indd 5

2014-04-25 8:23 PM

It’s easy…with the right tool. Meguiar’s® DA Power System brings the detailer’s secret – “dual action” – to your garage. Simply attach Meguiar’s DA Power System to your drill to see great results in less time.

For free personal car care advice, go to Meguiars.com or call 800 347-5700 Mon-Sat, 7:00am to 3:00pm Pacific Time

Untitled-1 1

1/31/2014 4:38 PM

TUNING

STOCK TO STACKED

THE 2014 SCION TC O F F E R S A G R E AT F O U N D AT I O N FOR BUILDERS

BY JORDAN LENSSEN

Few automakers offer a platform with as many tuning and customization options as Scion does with its tC coupe. Sure, the Honda Civic created the mold more than 20 years ago, but long gone are the days where there are no other options. Today, Scion is a preeminent brand when it comes to customization at an affordable price. For 2014, the tC is even more attractive to prospective buyers and builders. Complete with a new, aggressive design, the $19,965 (US MSRP) starting point for the manual transmission model means you can afford to spend a pile of cash on parts and accessories to build it exactly the way you want. It was the car of choice for last year’s Scion Tuner Challenge, and all three competitors showed just how versatile the tC really is. In the end, it was Young Tea's well-rounded build that won the award at SEMA. I recently had the chance to test the car for the first time and it gave me a fresh new perspective of what buyers might consider if they’re planning on a build, big or small. There are a few key things I noticed when I tested it. First, the restyling is fantastic: it’s bold, aggressive and offers a different aesthetic from many of the cars on the road. It’s a coupe that looks like a small sedan, and there are a ton of accessories for it.

Looking to build a pocket rocket? The 2.5-liter 2AR-FE might have just 179 horsepower and 172 lb-ft of torque in stock form, but with large displacement and 16 valves going into four cylinders, there’s plenty of potential. Turbos, cold air, controllers – there are a ton of options already with more to come. Inside, the styling offers an excellent starting point. Leave it stock or follow the lead of the Scion Tuner Challengers and spec it however you want – from micro VIP to full-on

racer. The double-pane split glass sunroof is a rarity in the compact segment and there’s also rear legroom for days - perfect for friends or stacking a massive audio wall, or whatever option you choose. Back up front, the double-DIN touch screen head unit is a nice addition to the car, and while it’s disappointing Scion didn’t include navigation or satellite radio (available with an extra accessory) as standard equipment except for the rare 2,500 unit Monogram edition, it will likely be one of the first things you swap if you take your audio seriously. Having a removable double-DIN option is a bonus these days. Where the head unit shines is phone and audio, enabling you to dial and select phone numbers and select songs and playlists right on screen. In practice, the OEM Bluetooth stereo sounds great as stock, but as someone who has also driven the FR-S, the tC suffers from Scion’s dreaded bass-dead rear zone; the

ELECT RONICS P i o n e e r AV I C - 5 0 0 0 N E X Head Unit

$750 ¬ Bring iPhone/Android apps to your touchscreen (cable separate) ¬ Apple CarPlay & Siri Eyes-Free for iPhone ¬ Bluetooth streaming ¬ Satellite radio ¬ 7.9-million POI navigation ¬ 13-band EQ ¬ 50x4 MOSFET

S o ny X S - G T X 1 6 2 2 S 2 - w a y S e p a ra t e s $119.95 ¬ 60 W rated power / 260 W handling ¬ HOP & Aramid fiber woofer ¬ Separate Tetron tweeters ¬ 4 ohm impedance

S o ny X M - G S 4 0 0 4/3/2 Channel 700 W Amplifier

$349.99 ¬ 70 W x 4 (@ 4 ohms) ¬ Subsonic Filter/Low Boost/HPF/LPF ¬ 2-8 ohm impedance (stereo), 4-8 ohm (mono)

S o ny G S S e r i e s S V C 8-inch XS-GS80L Subwoofer

$99.99 ¬ Extended low frequency response (28-500 Hz) ¬ 280 W (rated), 220 W (RMS), 900 W (peak) ¬ 4 ohm impedence ¬ Ferrite magnet ¬ Mica reinforced cellular honeycomb cone

EX HAUST GReddy Evo3 Exhaust System

$450 ¬ Throaty sound (88 dB @ 4,650 rpm) ¬ 60 – 70 mm piping

BRAKES

PASMAG

Scion tC 16.03-June v2.indd 1

T R D L e f t / R i g h t F r o n t B ra ke Caliper Assembly

$575 (each) ¬ Dramatically reduce brake fade ¬ Continually cools brake pad surface ¬ Braided stainless lines increase pedal feedback ¬ 4-piston opposed calipers, ceramic compound high-performance pads

T R D S t e e l B ra ke L i n e s

$167.31 ¬ Stronger pedal feel & brake bite ¬ More consistent than OEM

JUNE 2014

2014-04-25 5:01 PM

meat of the low end is packed into the front speakers. You could use a dedicated amp and subwoofer to solve your issues, or go shopping and pick up the system you really want. It’s a small price to pay for a well-rounded package. Thankfully for us proper-shifters, the manual transmission comes standard. The automatic is available for an additional $1,000, but your best bet is to put your money to good use elsewhere, like a nice flywheel or clutch upgrade, or maybe even a nice dinner! The Scion tC definitely faces tough competition from the Ford’s Focus and Fiesta, the Hyundai Veloster and even the VW Golf, but it also offers styling and configurations that make it vastly different than any of them. For starters it has the biggest standard wheel size (18 inches), and comes an easy second

in the horsepower category if you include the top-level Fiesta ST. If you want more bang for your buck, be prepared to shell out a bit more for a GTI, Veloster Turbo, or Honda Civic Si. Or you can put that money toward making your tC even better. Despite the competition, the tC stands on the foundation of what Scion is – something different. If it’s a clean build you want, we’ve seen examples of that in the past year. If you want a monstrous build, there are few platforms that offer such a creative palette. The high-slung doors, short profile and restyled exterior make the tC a great looking car, and from a builder’s perspective there are too many modifications to list. If you’re testing the waters for your next build – or are just looking for a new daily driver – do some research, see what’s available, and take it for a spin.

CLUTCH SPEC Stage 2 Clutch Kit

OEM Audio Plus Reference 400CF

$1,399 ¬ Full audio solution tuned specifically for the tC ¬ Multichannel 32-bit DSP power amp ¬ Carbon component speakers, midranges, tweeters ¬ 8-in. subwoofer ¬ High resolution sound ¬ Extended low end ¬ Custom trunk-fit subwoofer box ¬ Dealer installed

$439 ¬ Higher torque capacity ¬ Durable heat treatment and steel backing ¬ Lightweight Kevlar disc ¬ For dailydriven, medium-modified tCs

ENGINE D e z o d S c i o n t C 2 T u r b o S ys t e m

$4,549 250 to 330 whp (up to 450 whp) ¬ Garrett T3/T04E turbo ¬ CNC insta-tap oil pan system ¬ Stainless “Ram Horn” TIG welded turbo manifold ¬ TiAL (MV-S V-band wastegate, Q BOV) ¬ Stainless downpipe, s-pipe ¬ Aluminum intercooler pipes ¬ K&N lifetime cone filter ¬ CNC vacuum manifold ¬ DeatschWerks Plug-n-Play 550 cc fuel injectors ¬ AEM fuel & ignition controller (FIC) ¬ Custom wiring harness ¬ Featured in 2013 Scion Tuner Challenge ¬ New clutch recommended

Meguiar’s® DA Power System is versatile enough to compound, polish and wax your car. Simply attach the right pad with your favorite Meguiar’s product and let the drill do the work for you.

I n j e n C o l d A i r I n t a ke $360 +9 hp

SUSPEN SION

KW S u s p e n s i o n V 2 Coilover Kit

$1,799 (set) ¬ Vehicle lowered 0.6 to 2.2 inches ¬ Individual height/ rebound adjustment ¬ More responsive steering, power transfer

Scion tC 16.03-June v2.indd 2

TRD Lowering Springs $245 (set) ¬ TRD-developed spring rates specifically for tC ¬ Enhance response & cornering ¬ Lowered CoG by 1 1/8 inch

Go to Meguiar’s® Channel to learn more

2014-04-25 5:03 PM

CABE'S CORNER

BY CABE SIPES

MOTORIZATION GIVING YOUR INSTALL A VISUAL IMPACT

Motorization is a scary thing to tackle for many installers and fabricators. Although we have all designed these amazing moving and sliding installs in our heads, very rarely do they become a reality. This is usually a result of either cost or skill set. If it’s cost then you are limited to what you can do, but if you just don't have the skill, then it’s time to learn. The first thing to decide is what type of motorization you plan on installing. There are multiple ways to add motorization, but the three we are covering are: Push/Pull, Lift/ Lower and Open/Close.

• Actuator with pivot mounts at each end

PASMAG

PUSH/PULL is typically used for amp racks, pushing out the equipment to expose it, then pulling it back into its space. This type of movement is the easiest to achieve because there are minimal parts required. To achieve a Push/Pull you will need a track, linear actuator, switch and limit switches (optional). There are many places to purchase your parts, but I prefer ServoCity.com whenever I need anything. Their tech support is amazing whenever I need to know things like the load capacity of a motor, or anything else for that matter. Wherever you get your parts, make sure the specs meet your require-

ments, because while they might look the same, they could be very different. Let’s break these parts down so you can become more familiar. DRAWER slide tracks use ball bearings to minimize the friction when sliding open and closed. The less friction placed on the tracks, the easier it will be for the motor to move the tracks in and out. If you see that your motor is struggling to move the piece, add grease to the tracks to help them slide better. LINEAR ACTUATORS generally consist of a DC motor connected to a screw drive through a set of gears. The screw drive is set inside of a tube, which also has screw threads along the inside of the tube. When the motor turns, the screw turns inside the tube and the tube is moved in or out (depending on the direction of the rotation). To reverse the direction of the actuator, simply reverse the polarity of the electrical connection on the actuator. Actuators are available in lengths of travel from just one or two inches (like the actuators used for electric locks) to 36 inches or more. Some actuators have internal limit switches. These switches stop the actuator from travelling outside of its design limits. These limit switches will NOT stop the actuator if what you’re moving runs out of room before the actuator reaches its own maximum travel limit. If the moving piece(s) need to stop before the actuator reaches its limit, add a safety/limit switch of your own. If the actuator has no limit switches, the actuator may spin the output shaft past its design limits. You should always monitor the object(s) being moved when the actuator is activated. When building

JUNE 2014

Cabes Corner - Motorization.indd 1

4/25/2014 2:48:22 PM

Untitled-2 1

2014-04-07 3:37 PM

CABE'S CORNER

When selecting an actuator, choose one that can handle at least 20% more weight than the tension tool stated.

• Bore pinion gear in gear rack

• Squaring up an actuator

a system, keep in mind that linear actuators can easily rip apart amp racks or anything else that isn’t properly designed. To properly control an actuator, you need either a two-way switch or a switch and a couple of relays to reverse the polarity to the actuator so it can both push and pull. Now that we have the basic parts down, how do we know which ones to use? This is where the skill set comes in. There are two variables you must know to correctly choose the components needed. These are the travel distance and weight. The travel distance is the distance between point A and point B that you are trying to move within. This measurement dictates the track length as well as the actuator stroke required. The next variable is the weight of the item you will be moving. All tracks and actuators come in different versions (ie. standard and heavy duty). If your item is very heavy and you use a standard duty track, you will notice it dragging because the track is binding up due

PASMAG

to the weight. If you use the incorrect actuator for the job, your movement will be extremely slow and you run the risk of burning out the motor. So, how do you factor in the weight of something that slides in and out horizontally? Well, you can do a whole bunch of math and make yourself feel really smart, or, you can use a trigger tension scale tool. A trigger tension scale is used for firearms. To set the tension needed to pull the trigger, place a hook on the trigger then pull it back until it clicks. The weight displayed will show how much force is needed to pull the trigger. You can do the same with your project by hooking the tool to the edge of your panel and pulling until it begins to move. When it moves, it will show the amount of force needed to move the rack. When selecting an actuator, choose one that can handle at least 20% more weight than the tension tool stated. When it comes to construction, there isn’t anything easier than a sliding amp rack. Look at any drawer and you get the idea – it’s simply a base with at least two sidewalls and tracks attached to each side. Once you have your sliding base to hold your amp(s), place the actuator in the center of the slider, either in front or behind, whatever your design requires. When designing a Push/Pull sliding rack, take into account the body of the actuator and where it is being mounted. Some actuators have very large housings that could affect where/how it will be mounted. Ensure that everything is straight and in line when mounting and attaching the actuator to avoid binding or unwanted resistance. Visit www.pasmag.com/installs/motorization, where I will discuss the other two types of motorization (Lift/Lower and Open/Close) and the proper use of gear motors.

Twitter: @cabesipes Facebook: /CabeSipesFanPage Website: www.customaudioreimagined.com

JUNE 2014

Cabes Corner - Motorization.indd 2

4/25/2014 2:49:03 PM

ERS AK

C REPLA

NT S ME P

P r em i u m O EM 2-OHM The Perfect Mix Of Power, Fit & Size Available now at car audio retailers (check www.powerbassusa.com/dealers for a dealer near you)

Untitled-1 1

tel: 909.923.3868

fax: 909.923.8048

10/30/2013 10:28 AM

MOBILE ELECTRONICS

I N S T A L L

BIG BRUTE PROJECT

GROUND POUNDER PHASE.1

BY GEORGE DIMITRIADIS

People keep asking me, ‘Why? Why are you doing it? What would posses you to tear out a perfectly good build?’ The answer is quite simple. Because I want more!

roject Ground Pounder will chronicle the build of this 2005 Hummer H2, nicknamed Brute, from beginning to end. Prior to this project, Brute enjoyed life as a full-blown C-pillar built vehicle with eight 12-inch subwoofers behind the second row of seats that saw the 60/40 bench converted into a pair of buckets seats and custom center console. Powering the system required no less than four 7,500-watt amplifiers on a total of 16 batteries. Of course, keeping up with this took a total of 4,000 watts on a dozen eight-inch midrange speakers with a half-dozen super tweeters to round things out. It was loud – ground-shaking loud! And I’ve been asked many times why it wasn’t enough. People would ask why I wasn’t happy with it. But I was very happy with it and, aesthetically it was perfect. But I just couldn’t shake the tiny voice in my head that kept uttering, “B-pillar, B-pillar.” There’s an old saying that if you’re going to do something, do it right. That being said, Brute has gone under the knife once again! And we are talking a total ground-up overhaul.

MAPPING IT OUT Once my mind was made up, I sat down with some key people to go over the plan. I first met with my good friend John Wolak, owner of Ultimate Autosports in Stoney Creek, Ontario, Canada, to plan what was in store for this unsuspecting H2. Ultimate had a big hand in Brute’s previous build, so it was a no-brainer they would once again be at the helm of this project. Wolak and I mapped out the project the way I envisioned it, coming up with a very short list of companies we were going to work with. First on that list is KnuKonceptz to help us address the wiring needs for the vehicle. From its Kolossus OFC wire to its Krystal RCAs, Kno Knoise sound deadener and array of interconnects, KnuKonceptz is a onestop-shop for professionals and DIYers alike. Up next were the subwoofers and speakers. A meeting was set up with Core Industries. Core is the Canadian Distributor for a wide va-

PASMAG

WE’RE OFF TO THE RACES! riety of 12-volt companies, one of which happens to be RE Audio. Nick Cimino, Core’s National Sales Manager, provided invaluable insight and reaffirmed our decision to use RE Audio for the sub stage, and components for the front stage. Naturally, in order to power the front and sub stages, one needs an abundance of amplifiers. At the top of the manufacturer pile was one company: American Bass. Having used them numerous times in the past because of unsurpassed service and performance, my decision was easy. For power and charging, Cimino recommended Ohio Generator, so that’s who we went with. I have used these alternators in the past and had nothing but success with them. As luck would have it, Core also happens to be the Canadian Distributor for Ohio Generator too and, by the end of the meeting, Nick was my new best friend. That’s enough with the introductions already. Let’s get to the meat and potatoes here.

Disclaimer! What you’re about to see may be disturbing to some people. To others it is just another ordinary day in this glorious hobby we call car audio. Once I came to terms with what needed to be done and delivered Brute to Ultimate, the tear down began to make way for all things new. Part one of Project Ground Pounder shows the tear down process, including stripping the vehicle to its bare metal shell.

JUNE 2014

Project Ground Pounder Part1 16.03-June.indd 1

2014-04-25 5:09 PM

Verde Add.indd 1 Topline-Verde 16.03indd.indd 1

3/28/2014 9:24:33 AM 2014-04-25 6:34 PM

PROJECT

MOBILE ELECTRONICS

I N S T A L L

GROUND POUNDER PHASE.1

BIG BRUTE

DEADENING This process alone took more than a week, largely because a full-blown build was already in the shop and had to come out; it was imperative in order to prepare Brute for the sound deadening process. On the advice of Bill and Dan from KnuKonceptz, we used a combination of the 80 mil KnoKnoise Resonance Control and 100 mil Kolossus Edition sound deadener. There are four layers in the rear and seven layers up front, with each door receiving a generous helping of the 80 mil Resonance Control deadener. Kno Knoise has to be the easiest deadener I have ever worked with. The butyl is very pliable, doesn’t need to be heated and the foil backing makes it super easy to work with. My door panels went from tin can rattlers to Fort Knox. This will make

a substantial impact on the front doors considering the amount of abuse they will endure from all of the pressure generated once the bass starts going. Deadening the door panels also helps with the door panel build that will house the abundance of front stage components. I’m fortunate there are sizable openings in the door

panel skins of the H2, which allows for deadener application on the inner portion of the door. Granted, my hands look like they went 10 rounds with a meat grinder when it was all said and done. The pictures don’t do it justice. Once the door panel deadening is complete, the focus shifts to the floor of the passenger cabin.

Most people don’t realize how much abuse the floor of a vehicle undergoes. I have seen firsthand metal tear from excessive wear and flexing caused by low frequency bass music. Since I don’t want to be pulling a Fred Flintstone in the foreseeable future, a healthy application of the 100 mil Kolossus Edition deadener on

800-525

Project Ground Pounder Part1 16.03-June.indd 2

2014-04-25 5:09 PM

the floor from the B-pillar all the way forward and under the dash will ensure that. A total of four layers have been applied to the entire floor to aid in the elimination of flex. Moving to the roof and rear compartment. The former will be deadened once the sunroof has been sealed. In order to seal off a B-pillar wall properly, this must be done, although it isn’t possible because of the sunroof and tracks on the inside of the roof. So, the entire sunroof assembly and tracks will be removed, and I will weld a new bracket to house the sunroof that will be sealed indefinitely. A substantial amount of deadener will be applied to the roof at that time. The rear compartment will also receive a helping of deadener once the battery rack has been built.

WIRING Next is the installation of the charging wires, which run from the alternators up front to the battery bank in the rear. The wire of choice for this install is the KnuKonceptz OFC Kolossus FLEKS 1/0 wire. I opted for black for the ground wire, and the Kandy Kable Yellow for the power runs. (I’ve worked with tons of wire over the years and have to give it to KNU, this is top tier stuff! Besides the very workable housing jacket, the wire is tinned ofc, which provides unparalleled current flow.) Now for the fun part: having to cut the wire, run it and maneuver

the spools. For those of you doing double and triple takes, your eyes are not deceiving you. Those rolls are 500-feet long apiece! I offered a reward of $1,000 to anyone who was able to pick up each roll unassisted and carry it around the shop. When that failed I was relegated to rolling it around. Once the spools were in position, the cutting commenced. One run, two runs, three runs, four runs, five runs, all the way to eight runs of power and eight runs of ground. That works out to 200 feet of power and 200 feet of ground for the alternator charging wire up front.

PERFORMANCE - Xtra technology produces better color contrast and depth perception allowing drivers to see farther. QUALITY – Manufactured to DOT Specifications and backed by a one-year warranty. STYLE – Xtreme white color output with crisp illumination for the HID look. 800-525-7422

Project Ground Pounder Part1 16.03-June.indd 3

www.piaa.com

2014-04-25 5:09 PM

PROJECT

MOBILE ELECTRONICS

I N S T A L L

GROUND POUNDER PHASE.1

Typically, when you run power and ground wire you do so through the vehicle, under the carpet, and into the back. This is not the case with 16 runs of 1/0 cable. The wires begin under the hood. The eight runs of power wire run from the alternator-fused bracket and down the firewall along the inner driver’s side frame rail. Using a screw-in and insulated metal tie-down, we make sure to secure the power wire to the inner frame rail. All remaining runs of wire are attached to each other using zip ties, running down along the inner frame rail to the rear of the truck. Of paramount importance is making sure to avoid any sharp edges and the exhaust system. Once in the rear, the wire runs into the rear cargo compartment through 4x4-inch holes protected by rubber sleeves which are cut into rear floor cargo area. The same steps have been taken for the ground runs of wire on the passenger side.

Untitled-7 1 Pounder Part1 16.03-June.indd 4 Project Ground

BIG BRUTE

QUAD ALTERNATORS With all the charging wire running from front to back, it’s time to move under the hood and perform more surgery with four 300-amp Ohio Generator DR44 alternators. There is nothing like having 1,200 amps of charging current at your disposal. Hats off to Tom Eliopoulos at Ohio Generator for providing such sweet alternators! The first step is to remove the air intake tube while releasing tension on the belt and subsequently removing the belt. From there, the factory alternator is removed along with the lower idler bolts. With the space freed up, it’s time to install the custom quad alternator bracket. The first step is installing the front section of the bracket using longer bolts through the factory idler housing. The rear section of the bracket is then installed with the supplied spacers and bolts. An-

other important thing to account for is the relocation of the ECU and battery under the hood. The H2’s original ECU location is where the furthest right alternator will sit, so it needed to be repositioned about six inches lower and tucked away. The battery has also been relocated to the rear and tied in to the battery bank. To accommodate this, relocation wire runs to the rear and a positive and negative charging post is incorporated in to an ABS plastic platform, which will house a voltage gauge as well.

2014-03-31 5:10 3:42 PM 2014-04-25

Untitle

When it comes time to install the alternators, the first one to go in is the bottom alternator. After bolting it on, it is checked to make sure it is correctly clocked. We move in a counter-clockwise direction bolting on the second, third and fourth, leaving the final alternator loose for the time being. From here the remaining idler pulleys are mounted on to the bracket and the new belt is routed. The fourth and final alternator (which is in the stock alternator housing position) requires the bolt

3:42 PM

Untitled-1 1 Pounder Part1 16.03-June.indd 5 Project Ground

be removed to drop it one-half inch and allow for the belt installation. Once this is done, the tension being applied to the factory tensioner can be released in order to finish wrapping the belt around the fourth alternator. With that done, the bolt for the fourth alternator can be installed and secured. With all of the alternators installed, it’s time to check the belt alignment on all pulleys and idlers. This is done by starting the vehicle and making sure the belt does not rub, and letting it idle for

only a few minutes as it is running on battery power. The final piece of the puzzle is the ABS bracket, which houses the KnuKonceptz in-line ANL fuse holders. Using 1/8-inch ABS plastic, we cut it to size (12x10 inches) and give it a slight 25-degree bend. Four waterproof ANL fuse holders are mounted on top with four matching ones underneath, each with a 300amp ANL fuse (of course, the fuse has not been installed as of yet). All wires are terminated with crimped-on 0 AWG ring terminals with two runs of 0 AWG power and ground per alternator. Phase one of Project Ground Pounder is now complete. Be sure to read the full version online at pasmag.com/groundpounderpart1 and stay tuned for the second phase in the next issue of PASMAG.

PHASE ONE

ESSENTIALS • Custom quad alternator brackets and hardware • Ohio Generator 300-Amp alternators (x4) • 135 sq-ft of KnuKonceptz KnoKnoise 80 mil Resonance Control sound deadener • 100 sq-ft of KnuKonceptz KnoKnoise 100 mil Kolossus Edition sound deadener • 200 ft of KnuKonceptz Kolossus Fleks Kable Black 1/0 • 200 ft of KnuKonceptz Kolossus Kandy Yellow 1/0 • KnuKonceptz in-line waterproof ANL fuse holders (x8) SOURCES Ultimate Autosports ultimateautosports.ca • 905-385-8446 KnuKonceptz knukonceptz.com • 216-310-6555 Ohio Generator ohiogen.com • 330-875-6677 Core Distribution coreind.ca • 905-570-8613

2014-04-22 5:10 9:55 PM AM 2014-04-25

TUNING

Exclusive

CHINAALL IN GOES

FOR TUNING W I T H X I E Y U , G E N E R A L M A N A G E R O F YA S N I N T E R N A T I O N A L E X H I B I T I O N C O . , LT D . BY SHAUN KEENAN | PHOTOGRAPHY COURTESY OF YASN INTERNATIONAL

The automotive specialty equipment aftermarket held its big, annual trade show in Las Vegas last fall. Like so many years before, PASMAG and its team members were in attendance to report on the newest modified vehicles and coolest parts the sport compact tuning segment has to offer. The SEMA show went much the same as years gone by and, by now, we trust you’ve seen our mega-sized coverage. Our editors and photographers scribed thousands of words and took thousands of photos, and we “liked” and “hashtagged” everything from #FordOutFront to #GlobalRallycross to #LibertyWalk, #RocketBunny and everything in between. We made all sorts of new friends; people from Canada, the States and even far off lands. One of them is Xie Yu, a Chinese businessman from Beijing, China, and the General Manager of YASN International, an automotive trade and enthusiast show company. Mr. Xie is a car guy who’s hell bent on taking the Chinese tuning industry to the promised land, which is why he made the trek to Nevada for the big show and went camera happy once he got here. We managed to catch up with Mr. Xie between shutter clicks and sit down with Ruby Yang, YASN’s International Affairs Manager, to get the state of the tuning industry in China, and find out what his car-crazed countrymen are looking to learn from the European and American custom car hobbyists. PASMAG: Can you start by telling us a little about YASN International? Mr. Xie: Yes, of course. YASN International is a trade show organizer based in Beijing, China. We have a history of 12 years, and we focus on aftermarket and the business related to the auto aftermarket. We have three segments to our business. One segment is trade show organization. One of our flagship shows is called the China International Expo for Auto Electronics, Accessories, Tuning & Car Care Products (CIAACE). At the previous edition of CIAACE in 2013, we had more than 6,000 exhibitors on more than 250,000 square meters of space and about 200,000 attendees. That

PASMAG

JUNE 2014

MrXie AllinTuning 16.03-June v2.indd 1

2014-04-25 4:20 PM

Currently, there about 5.6 million cars in Beijing and we have about 300 car clubs, and close to 100,000 people who are involved in the tuning industry. Also, in the North of China, people are rich and like to spend money. People in the south of China are also rich, but they spend their money reasonably, not like the people in the north. The people in the north like to show off.

“For the consumer, you need to show them what their car will become, build the dream for them.” includes manufacturers and the channel buyer or distributor, retailers and professional visitors and also a small percentage of the consumers. The first CIAACE show took place in 2005. PAS: I understand you have another show called All in Tuning and 2014 will be its third year. Please tell me more. Mr. Xie: I would like to tell you the history about All in Tuning, which was originally established as a tuning pavilion at the 2005 CIAACE. At that time, the Chinese market share for the tuning industry was only worth about six million yuan, or $125 million U.S. dollars. That grew to $10 billion U.S. dollars in 2012. So, we thought it was an opportune time to start up a separate new show just for tuning in cooperation with Germany’s Messe Düsseldorf (Trade Fair). PAS: Why did YASN want to partner with Messe Düsseldorf? Mr. Xie: YASN has an advantage in the Chinese market with Messe Düsseldorf, which is a top-five exhibition company worldwide. They have international fame that will help us recruit European exhibitors and other international exhibitors. That was improved after our cooperation. The European tuning VDAT and the German transportation ministry said that they are high-level leaders to our show. We believe that is because of the participation of Messe Düsseldorf. As a Chinese exhibition company, we know the Chinese market and we have the resources in China for the industry and also for the government. PAS: Is All in Tuning a trade show or a consumer show? Mr. Xie: All in Tuning is a B2B and B2C show for automotive aftermarket enthusiasts. China is a very big country, and the tuning industry is just in the early stages. We have to promote this industry to Chinese consumers and inform them what tuning is, how to tune your car and what benefits tuning your car can bring. Compared to the CIAACE, the All in Tuning show has an emphasis on B2C. Beijing is the capital of China, and the largest Chinese city for car ownership.

PAS: What kinds of vehicles are on display at All in Tuning? Mr. Xie: The most popular brands in China for tuning are Mitsubishi, Subaru and Toyota from Japan; from Europe, BMW and VW are popular and have the largest percentage of sales market share. The VW Golf, Toyota Corolla and Ford Focus are also very popular for tuning. General Motors are not that popular. There is a higher percentage of Chryslers and a small percentage of Buick. Dodge are just imported from overseas, so [they are a] very small percentage. According to our research, there are about 30 million car owners in China. They are largely satisfied with their current car, but they also would like to personalize their cars and modify them. PAS: How do you see the U.S. companies fitting in at the show? Mr. Xie: First of all, the tuning industry is still in its early stage in China. Many individuals and/or tuning shops don’t know how to properly modify their cars. Secondly, in China, there is no specialty equipment aftermarket. Many American tuning brands sell specialty equipment that are made in China, but in China they don’t sell. It’s not enough to have and sell the products, you need to know how to modify. The U.S. automotive tuning industry has a long history. The U.S. has the sophistication, the technology and the products. From my point of view, compared to the European tuning companies, U.S. tuning companies have more prestige and a high reputation. Chinese people also really like the U.S. style. PAS: And American brands will come to All in Tuning, show the people what they want to have, put on seminars and share some tips and tricks... Mr. Xie: My suggestion to U.S. companies and U.S. exhibitors at All in Tuning is – if you want to be successful in China – you have to do something to influence them. For the consumer, you need to show them what their car will become, build the dream for them. Another is the reference to the tuning shop: how will they do the work to modify? Currently in China, even many tuning shops don’t know how. So, we have to teach them, teach the tuning shop and show the car owners how the dreams for their car can be realized.

2013 CIAACE 6,000 EXHIBITORS

250,000 SQUARE METERS

200,000 ATTENDEES

CHINESE INDUSTRY

AFTERMARKET IN 2005

$125 MILLION IN 2012

$10 BILLION [EST.]

JUNE 2014

MrXie AllinTuning 16.03-June v2.indd 2

PASMAG

2014-04-25 4:20 PM

TUNING

Exclusive

[EST.]

5.6 MILLION CARS IN BEIJING

300+ CAR CLUBS [EST.]

100,000 PEOPLE

IN THE CHINESE TUNING INDUSTRY

MrXie AllinTuning 16.03-June v2.indd 3

PAS: So, does all of the vehicle tuning in China take place in small private shops? What about big shops and dealerships? Mr. Xie: According to Chinese law, all cars sold by a 4S dealer must be serviced by 4S dealers, so they have the resources for the tuning industry. PAS: What is a 4S dealer? Mr. Xie: 4S dealers, which are very big and very powerful in China, are OEM new car dealers. In order to be considered a 4S, which is very significant, it means they do new car sales, vehicle service (both mechanical and collision service), sell spare parts (repair parts and crash parts) and survey. Survey means they are basically collecting different types of information (mechanical, customer service) from their customers and giving it back to the OEM. The 4S dealers, who are looking for new revenue streams are now looking at dealer installed accessories. PAS: Are there other important issues that we haven’t touched on yet? Mr. Xie: The tuning industry in China has grown very fast over the past few years despite the fact

“Many of the automotive regulations in China today date back 50 years, and the government has not kept up with them.” the government has been slow to react. Many of the automotive regulations in China today date back 50 years, and the government has not kept up with them. But now the government wants to change that because it has seen the massive potential that exists. Currently, the laws are strict with respect to what you can and cannot do to a car. Cosmetic things like paint, vinyl wraps, window tint, wheels, tires and all kind of interior alterations are allowed. After the government changed the regulations for the wheel and tire market, it grew very fast. On the other hand, performance modifications are generally illegal, so there is relatively little

2014-04-25 4:21 PM

Untitle

THERE ARE AN ESTIMATED

growth in the segment. We are working very hard with the government to come up with rules and regulations to change that. Once the regulations in China are changed, the growth of the performance parts segment will be anywhere from 10% to 20% within two years. PAS: I bet there are a lot of people looking forward to that day! What’s the date for the 2014 All in Tuning show again? Mr. Xie: The 2014 All in Tuning show will take place August 9 to 11 at the China National Convention Center in Beijing’s Olympic Village. And I’m very excited that PASMAG will be there!

Untitled-7 1 MrXie AllinTuning 16.03-June v2.indd 4

As of March 1, 2014 the Performance Publications Media

30 MILLION PRIVATELY OWNED CARS IN CHINA

Group — the parent company of PASMAG — is the exclusive North American representative of YASN International and the All In Tuning China show. For more information on the show, please visit

www.allintuningchina.com.

BY THE YEAR 2020, SOME EXPERTS BELIEVE THERE WILL BE AS MANY AS

120,000,000

2014-03-31 4:21 3:43 PM 2014-04-25

HELLO

TUNING

MOTO BY ERIC EIKENBERRY | PHOTOGRAPHY COURTESY OF CLUB 4AG & MOTO MIWA

If you were lucky enough to be born in Japan in the early 1970s, emigrate to California in 1978, and spend most of your formative early years in the front seat of your family’s delivery trucks, you might have developed a healthy interest in motorized vehicles. If you then went on to found and preside over one of the most influential web-based, single-model car enthusiast clubs in the world, you might be Motohide Miwa. He’s been the president and organizer of Club4AG.com for as long as it’s been around, not simply because he does it well, but also because he’s a class act; knowledgeable and humble. He’s ruined the position for anyone who would succeed him so, predictably, no one has.

When his interest in vehicles and involvement in manufacturer promotions coincided, he wound up face-to-face with Mr. Tetsuya Tada, chief engineer for the FT86 project, which became the break-out sports coupe hit that both Toyota and Subaru executives were longing for. And it’s all because a young man who had an AE86 Corolla shell once sat down at a computer to type up his thoughts, frustrations and experiences with an ongoing restoration project for that new-fangled World Wide Web. For Moto, as he’s commonly known as, all cars are beautiful things, even those not built by Toyota or powered by a 4-AGE engine. With that in mind, we talked to him about his past, his present and what he thinks of the FR-S as the potential savior of the sport compact car market.

of the The unveili6ngpro totype. Toyota GT8

PASMAG: When did you realize you wanted to work with cars in some way? How old were you? MM: I don’t know. My mom tells me I was drifting my walker-roller thing into walls of the house at one-and-a-half. As long as I had a mind, it was [focused] on things with four wheels. I was born in a home in Osaka, Japan next to my grandfather’s noodle factory. Trucks came to pick up noodles starting at 4 A.M. and I would often ride with various drivers on their delivery routes. So, I spent a lot of time in passenger seats of those trucks, and maybe that was an influence. Also, the 1970s was the start of Japan’s economic stability and it is when modern Japanese cars became respectably good, and nice cars were all the rage back then. PASMAG: What was your first project vehicle? Was it a hand-me-down or did you buy it? MM: My first personal car was a 1985 Honda Civic that I bought brand new at age 16. This is before anyone even considered a Civic, or any Honda for that matter, an enthusiasts’ car. But parallel to me customizing things on it, the market grew quickly to embrace things like the first-gen CRX that was new at the time, along with a bunch of other neat cars from Japan. Most people who sort of visited the twisting roads back in those days were Alfa Romeo, BMW, Porsche, and VW owners, and I was sort of the newbie with a neat little Honda that could scoot along competently with these European subcompacts. Those are my roots and my start really, in engaging the public awareness for Japanese cars.

Motohide “Moto” Miwa.

A young Mo in parts heato ven.

Taka Aono tack ling Pike’s Peak .

"Stick with what you enjoy, and never ever veer from it. Things will happen that will make you something extraordinary to others, while the only thing you chased all that time will be just your passion." 92

PASMAG

Tuning Legends_v3.indd 1

JUNE 2014

2014-04-25 7:14 PM

LEGENDS: PASMAG: Why Club 4AG? What struck you as special about the Corolla? MM: In 1993, I acquired a nice shell of an AE86, which, at the time, was relatively unknown to Americans in terms of a performance car since most FWD hot hatches at the time had fancy turbo engines and outran the little AE86. While no one paid any attention, it was one of my targets to build someday and by 1994 it was cheap enough that I could really start to work on one. I probably spent a year taking apart every single nut and polishing, hammering, torching, straightening, reinforcing and just taking my time with this car. I envisioned it as my nice daily driver that’s destined to be so much driving fun. By 1996 a thing called the World Wide Web (or Internet) started to become a project in the computer industry and viable communication media for savvy business folk. Intrigued by how that worked and grew, I basically started to try my hand at creating a website. With my brain not really filled with anything but cars to talk about, I began to sort through what I had on record as tidbits and photos and loaded them into what was called, a “website.” I titled it Club4AG, hoping that somebody who might need this information or simply find my project interesting, would somehow find it and read it. With many big firms now starting to buy domain names like Toshiba.com or Toyota. com, I decided to buy my own called “Club4AG. com” without much thought other than, ‘Why not?’ It cost me I think, $230 at the time, and $50 or something to host a forum each month. Bandwidth was expensive, but curiosity of how the Internet worked really got me involved. By 1998, a fully working website with forums and databases that really could be used by guests was up and running. Each week a dozen or so more people from all over the world would register an account and chime in with appreciation of my work, or simply just to reference stuff I wrote. That dozen became 100 then 1,000 and within a few years it became an online community for 4A-GE powered car owners, and there were folks chatting and discussing many things about these cars. PASMAG: Which sponsors or manufacturers have you had the best relationship with over the years? MM: Falken Tire USA is one of the most notable for us at Club4AG as they have been the resource for much of the larger things we did. It was the deep relationship with Falken

TWO

The D1GP staff in 2005.

CLUB4AG ALUMNI

THERE ARE MANY FAMILIAR FACES ON THE CLUB 4AG MEMBER ROSTER

KEICHI “THE DRIFT KING” TSUCHIYA

TARZAN YAMADA

that put us on the map in the corporate world, which in turn enabled us to open doors into other firms for support. In recent years, I’ve been working with development teams at Toyota. One of the most notable being that I had Moto’s AE86 at a SoCal Drift Day event. been lightly involved in the creation of the FT86 since 2007 – something that really fit what I was doing with AE86 all these years, and now thoroughly enjoy as a car to cater the same joys and form the same type of community, 25 years after the last AE86 had rolled off the line, and for a whole new generation of people. The FR-S/BRZ/86 has been almost 100% of what I am doing with everyone, from public events to private development tasks. For that we are going between third-party suppliers, aftermarket firms, consumers, enthusiasts and bridging and translating that colloquial industry language to fit the needs of each niche, department and community in an effective two-way communication.

KENSHIRO GUSHI

CHRIS FORSBERG

Taka Aono has destroyed more Corollas .than anyone we know. He also drives them harder than anyone we know too!

JUNE 2014

Tuning Legends_v3.indd 2

Part

PASMAG

2014-04-25 7:15 PM

TUNING

The little chassis that could, the chassis that launched a worldwide cult following.

LEGENDS: PASMAG: If you could start over again, would you repeat the same process or are there things you would change? MM: I’m not sure. Since this whole thing revolves around the needs that happen with time, and is not based on financial or business goals of any singular manner, I adapt quickly to requests of many kinds. So, I can’t really say I would do it differently. I am sure if it started in another era, things may have been very different, but I am sure that I would have adapted it to what was still fun and basically creates joy for automobile enthusiasts. PASMAG: What advice would you give to a young person who has an interest in building his or her own performance machine? What platform would you consider to be a good start? MM: All I can say is ONE simple thing. Stick with what you enjoy, and never ever veer from it. Things will happen that will make you something extraordinary to others, while the only thing you chased all that time will be just your passion. It’s funny how that works, but if you veer or derail your focus, you waste time on what is important to become someone unusual. And any and ALL extraordinary people by nature are unusual. So if normal people tell you that you’re nuts, embrace it.

CLUB4AG ALUMNI

Part

TWO PASMAG: Who were your biggest influences? MM: There are way too many people. From the guy who invented the first carriage on four wheels to a 14-year-old kid named Ken Gushi who beat down all the walls of an establishment and became a professional driver in recent years, and everyone in between. I can probably name a list that will fill a 500-page roster if I listed them all. PASMAG: What’s your greatest accomplishment? MM: I can’t say it is my accomplishment, but evidently I am very proud of everything we have collectively done to date with all the many friends in the community to get this far, and to be able to carry on enjoying automobiles in such ways long into the future. PASMAG: What were your biggest surprises? MM: In 2007, when a former chassis design engineer from Toyota R&D flew over to sit me down in a chair at a random Starbucks and introduced me to a man named Mr. Tetsuya Tada, a chief engineer. This man, who in the weeks that followed, I will find that I will be working with on an ongoing relationship to build the next compact sports car that will stir the soul like the AE86 once did. That car was the FT86, which eventually became the FR-S/BRZ/86 as a production model. I was completely flabbergasted for months, and I still wonder how that all started.

Club 4AG night at the House of Drift in Irwindale.

PASMAG

Tuning Legends_v3.indd 3

TSUKASA GUSHI

ALEX PFEIFFER

CALVIN WAN

ANDY YEN

JUNE 2014

2014-04-25 7:15 PM

Untitled-1 1

2014-04-15 3:52 PM

LEGENDS:

TUNING

PASMAG: What is it about any particular automotive design that draws you in the most? What aspect most easily hooks your attention? Have you found that this has changed over the years as you’ve grown older? MM: I like any and all automobiles, but what really hits my spot are those cars that have a very singular reason for existence; a luxury sedan that doesn’t pretend to be anything else, a minivan that is solely effective at being a minivan, a heavy-duty truck that can just pull anything as a hauler. A Lamborghini that’s not simply built to be [reliable] or convenient, but for the main focus of getting that attention as a stunning machine that blasts past you on the street. Overhead view of a typical Clug 4AG gathering, still going strong!

000

PASMAG

Tuning Legends_v3.indd 4

PASMAG: What does Club 4AG do, actually? Is it only a web-based presence or are there gatherings or a yearly car show? MM: Today, Club4AG is a group who voluntarily identify themselves as a member online and offline, without a formal and strict roster, who all enjoy cars, befriend people and carry on spreading the fun of automotive enthusiasm and knowledge. We come to

Part

TWO

gather in groups large and small to execute whatever is being asked that fits the goals stated, and do it in the best way possible. PASMAG: How many members has it had over the years? MM: Not sure, but currently we have about 25,000 members online globally who just come together to have fun with automobiles. My goal is never to be the biggest nor to fixate on the number of “LIKES” or trend, but to grow in a healthy natural manner that caters to and represents the quality and focus of the entity.

"Today, Club4AG is a group, who voluntarily identify themselves as a member online and offline, without a formal and strict roster, who all enjoy cars, befriend people and carry on spreading the fun of automotive enthusiasm and knowledge."

JUNE 2014

2014-04-25 7:15 PM

PASMAG: You’ve recently picked up a Scion FR-S, tell us more about it. Is this the car to save the affordable sports car market? MM: FR-S… I think every single mention that is positive, and negative, by everyone who loves or hates it, are the result of paying attention to the very existence of this car. And as such, as long as people have discussions about it and there are lots of folks who enjoy such cars, that there is a place on earth and in the hearts of those who experience it. Whether that will last a lifetime or not, only time will tell. But since I had the rare opportunity to help shape it – and I rather like this car – that at least in the community that embraces it, it will have a long life as a cult car and be filled with pleasures and great stories to be told by many. It’s really how a car becomes a legendary classic. And that doesn’t happen by marketing tactics or specifications on a piece of paper, but only by the folks who might want to embrace it, even for a short duration of the life we all live, to have something to say about it to future enthusiasts of automobiles.

CLUB4AG ALUMNI

NAOKI KOBAYAHSI

ERNIE FIXMER

BRYAN NORRIS

ALEX VILLAREAL

Words to live by; pick your passion, follow it devoutly, and ignore the naysayers who think you are crazy. It’s worked for Moto, it’s worked for us here at PASMAG, and we’re betting it’ll work for you. And, if you’re good enough at it, we’ll bet you’ll be able to park an FR-S in your garage too!

Moto’s personal FR-S – one of the “First 86” cars to be delivered to the U.S. by Toyota – leads the big club drive to northern California in 2013.

JUNE 2014

Tuning Legends_v3.indd 5

PASMAG

000

2014-04-25 7:16 PM

P E R F O R M A N C E

F E A T U R E

RETIREMENT PLAN

M A R K S . B U F F I N GT O N H A S A P L A N ; T O P A S S E V E R YO N E E L S E O N T H E TRACK ONCE HE RETIRES

Some folks have 401k plans, money in the bank from years of hard work, and IRA accounts worth hundreds of thousands of dollars. Some people, like magazine editors, have little more than that which is created by their overly vivid imaginations. Mark Buffington has an Evo 8 and, for him, that’s perfectly alright. You see, where his contemporaries cut their teeth on muscle cars, hot rods and big block V8s, Buffington came late to the game with a small import car he inherited from his father. After a trip to a local show opened his eyes and whet his appetite for what could be, he found the four-door Evolution VIII as soon as it was released, traded in his training wheels and never looked back. Although he’s now 57, and planning to retire in a few more years, it appears that slowing 98

PASMAG

down will be out of the question. He is planning to go somewhere, fast. At the heart of Buffington’s ridiculous build is the infamous 4G63T, with the “T” in this case standing for an FP Red turbocharger upgrade. The downpipe and wastegate come from HKS, and there’s a front-mount Type “R” intercooler and piping connected to an HKS Special Edition black-finished SSQV blow-off valve. Injector Dynamics 1,000 cc squirters are necessary along with an AMS fuel pressure regulator and a Full Blown fuel hat with stainless steel lines. Ensuring sufficient fuel flow is the job of a dual pump setup; one Walbro 255 LPH pump combined with a Nissan 300ZX Twin Turbo pump. Insane Speed built a custom air intake, which features a K&N air filter for cool flow into the turbo. Inside the ported head are HKS 272- and 264-degree camshafts and timing gears spinning an HKS timing belt under a clear cover. Buffington is especially proud of his fuse box cover, signed by the “Drift King” himself, and all of the custom touches and rare products he’s accumulated, including the ARC turbo heat shield and the Carbing oil catch can with stainless steel hoses. He’s also understandably proud of the power it produces.

JUNE 2014

Performance - Mark Buffington Evo8 16.03-June v2.indd 1

2014-04-25 4:15 PM

“The 4G63 has been around for, like, 100 years. You can put down nearly 600 hp with it, and mine makes a little over 500 hp and 460 lb-ft of torque with the FP Red turbo. My STI-driving buddy always talks about how great his car is...but the STI motor is only good for a little more than 350 hp on stock internals, then you start breaking things like rods. I put him in my car, took him for a drive and scared him.” Engine management duties fall to the venerable, proven, HKS F-Con V Pro, which has been tuned by Mike Angel at Insane Speed in Las Vegas. He’s also using a Blitz boost controller and turbo timer to keep the turbo happily spinning within its peak range. Buffington’s not embarrassed about what he’s spent on the work performed by Insane Speed either. “I look at my car and I think of it as a piece of art. I enjoy constantly redoing it. A project is never truly finished and I certainly agree with that. I’ve maxed out my credit cards, then paid them off, then maxed them out again, over and over.” The driveline modifications consist of an Exedy twin-plate clutch and flywheel and a Driveshaft Shop two-piece aluminum unit balanced to an absurdly-high RPM. Buffing-

ton knows the transmission and differentials will need reinforcement before he transfers the car to race-duty, but that’s still a couple years away according to his plan. His brakes are the very capable Brembo four-piston fronts and two-piston rear calipers powdercoated in white, gripping Stoptech cross-drilled and slotted rotors. They sit inside silver-finished 18x10.5-inch Volk Racing CE28s wearing BFGoodrich 255/40-18 tires. And, as nice as they are, they can be completely overlooked when viewing the rest of the exterior because of the wild VeilSide VSD-1 body kit and Seibon carbon fiber CWII hood, trunk and front fenders. In the rear, an APR 500-series GT wing with custom Uehara winglets rests on 12-inch stands and threeinch extensions to better place it in the air flowing off the Seibon roof vortex generator. Varis front canards, side diffusers and a rear diffuser add the sort of downforce necessary to keep the Evo planted at track speeds. For the chassis, he’s stuck with the 36-way adjustable coil-over system from K-sport paired with Whiteline rear control arms and bushings. Most of the braces come from Carbing, with additional stiffness supplied by the Cusco six-point bolt-in roll-cage. A Cusco carbon fiber cross brace will provide the eventual support for proper race harnesses, something Buffington has yet to purchase. “The only sponsor I have is BFGoodrich, through Team Hybrid. I’ve paid for everything else myself.” One of his favorite tales involves a guy and his young wife stopping by Insane Speed and seeing the Evo in for one of its frequent upgrades. The lady commented on how the car was probably owned by some immature Asian kid with an attitude and access to his parents’ money. Her husband happens to meet Mark at the shop, and they shared a good laugh at just how wrong she was in her estimation of the owner’s demographics. “I’m an old, fat, white guy nearing retirement age,” he jokes, one who loves showing this car off, once going so far as to allow children to crawl JUNE 2014

Performance - Mark Buffington Evo8 16.03-June v2.indd 2

PASMAG

2014-04-25 4:17 PM

P E R F O R M A N C E

RETIREMENT PLAN

F E A T U R E

into the rear seat caged area and all over his carbon fiber and aluminum rear seat panels. “My goal is to win Best of Show at the next big event coming up in May 2014.” His interior might just help, too, with Bride Zeta II race seats on Bride brackets, and a Nardi “deep dish” steering wheel on a Works Bell short hub and quick release. A large Faze tachometer and a full complement of HKS boost, exhaust gas and oil temperature gauges are scattered around the interior with the last three sitting where the passenger’s seat airbag used to be. The critical AEM air/fuel ratio gauge is mounted to the steering column directly in front of the Rally-Art white-face gauge cluster. In one of his few nods to creature comforts, Buffington has installed a JVC seven-inch touchscreen head unit to keep the tunes flowing. We’re not sure what classic rock station goes best with a time-attack-styled Evo, but Buffington has all of the bases covered. We like the Cusco special edition shift knob and the Sparco brake release handle and pedal set, and the silver and white look to the accessories, including the cage, blend well with the dark fabrics and exterior graphics. The wraps for the roof, door handles and bumpers have been completed by Elliot at 5150 Wraps. Why does it look so clean? The answer is simple; it has an extremely low number of total miles on it. At the time of this writing, “I’m just over 8,000 miles on it now,” says Buffington. “I get this from Todd at the shop

(Insane Speed) all of the time; ‘When are you going to drive this thing?’ But this car is scary on the street; it is too dangerous around other cars. I want to take it to the track in a few years.” Buffington doesn’t want to damage the custom body work he’s had performed; he has already sent it in for surgery once more. “The Evo is at the shop again. I’m having them do even wider rear fenders than before. It will be completely different the next time you see it. We’re doing a custom rear diffuser with 12-inch canards where there are three-inch ones now.” Clearly, Buffington has found some sort of ticket to the fountain of youth. His exuberance for this one machine knows no bounds; it comes pouring out with every story he tells. “When I retire... look, the old guys driving their old Porsches, Ferraris or Vettes, those are their dream cars. This is mine. When they go to the track I’m going to be able to beat them in my four-cylinder Evo.” Not only that, this madlyplanned machine is showroomfloor-clean in a way only museum curators and concours judges can truly appreciate. And, in a bit of remarkable restraint, he’s kept it that way for 11 years! If this car was mine it wouldn’t last 11 minutes before I'd try to find its limits. I’d also wind up going to jail, collect a pile of tickets and star in a fairly epic YouTube police chase video along the way! Nevertheless, I applaud his verve and style, and wish him all the best with his retirement plan.

ESSENTIALS

2003 MITSUBISHI LANCER EVOLUTION VIII OWNER: Mark Buffington CLUB AFFILIATION: Team Hybrid ENGINE: Mitsubishi 4G63T 2.0L

HORSEPOWER: +500 hp TORQUE: 460 lb-ft

ENGINE MODIFICATIONS • FP Red turbocharger • Insane Speed (bored out OEM manifold, custom air intake, custom • stainless steel radiator hose • HKS SSQV-Special Edition blow-off valve • HKS (down pipe, waste gate, front mount Type R intercooler, 272- and 264-degree camshafts, cam gears, aluminum spark plug cover, clear cam gear cover, timing belt, radiator cap) • Perrin (fuel rail, lower radiator hose) • I.D. 1,000 cc fuel injectors • AMS fuel pressure regulator kit • NGK Iridium spark plugs • K&N air filter • Osaka Ex. ignition coils • Cusco valve cover • ARP (head studs, main studs) • Full Blown (fuel hat, stainless steel fuel lines, fuel wiring system) • Walbro 255 LPH fuel pump • Nissan 300ZX Twin Turbo fuel pump • Carbing (cooling plate, oil catch can, custom stainless steel hoses) • Koyorad radiator • Tomei oil cap • ARC turbo heat shield • Uehara Motowerks (custom bracket stands, stainless steel shock hood hinges, racing flat hood pins) • HKS F-Con V Pro tuned by Mike Angel at Insane Speed • Sun Auto ground system • Blitz (boost controller, turbo timer)

EXTERIOR VeilSide VSD-1 body kit • Seibon Carbon (CF roof vortex generator, CWII hood, trunk, front fenders) • Cusco Carbon fiber shorty antenna • Ganador mirrors • APR 500-series wing with 12-in. stands and 3-in. extensions • Uehara Motowerks custom side winglets • Varis (A-pillar canards, winglets, side diffusers, rear diffuser) • Graphic Impact (custom painted “Cherry Bomb”, red/ white/blue/silver graphics) • Carbon fiber wrapped roof, door handles, front and rear bumper parts by Elliot at 5150 Wraps

EXHAUST SYSTEM • HKS Twin exhaust system

ELECTRONICS • JVC 7-in. touchscreen monitor

DRIVETRAIN • Exedy (twin-plate clutch, flywheel) • Driveshaft Shop two-piece aluminum driveshaft

SPONSORS • BFGoodrich

CHASSIS/SUSPENSION • K-Sport 36-way adjustable coilover system • Whiteline (rear control arms, urethane bushings) • Carbing (under bay aluminum plate, four-way trunk brace, front strut tower brace) • Cusco (six-point bolt-in roll cage, carbon fiber cross brace)

INTERIOR Bride Zeta III racing seats • Takata Racing pads • Nardi deep dish steering wheel • Works Bell (short hub, quick release) • Cusco special edition shift knob • Sparco (pedal set, dead pedal, brake release handle grip) • Rally-Art gauge cluster • AEM air/ fuel ratio gauge • Faze tachometer • HKS (boost gauge, EGT gauge, oil temperature gauge) • Airbag delete • Rear seats delete with brushed aluminum, carbon fiber back panel • Brushed aluminum, carbon fiber door panels

SPECIAL THANKS • Team Hybrid Founder/President James Lin, LV chapter director Archie Concon, Murry at Uehara Motowerks, Todd and Mike at Insane Speed, Mike at Zenkai Motorsports, Elliot at 5150 Wraps, Paul at Graphic Impact, “PCP,” my sons Dustin and Max, Hybrid Hunnyz and my Team Hybrid teammates

WHEELS/TIRES/BRAKES Volk Racing CE28 wheels – 18x10.5 (f/r) • BFGoodrich tires – 255/40R18 (f/r) • Racing Neon extended lug nuts • Brembo (four-piston front calipers, 2-piston rear calipers) • Stoptech cross-drilled and slotted rotors • K-sport stainless steel brake lines

100

PASMAG

JUNE 2014

Performance - Mark Buffington Evo8 16.03-June v2.indd 3

2014-04-25 4:17 PM

Untitled-4 1

2014-04-02 1:16 PM

P E R F O R M A N C E

F E A T U R E

ALL BLACK

EVERYTH TYLER PFLANZâ&#x20AC;&#x2122;S TWIN-TURBO SUPRA

BY JORDAN LENSSEN | PHOTOGRAPHY BY JUSTIN MUIR

102

PASMAG

JUNE 2014

Performance Tyler Pflanz Supra 16.03-June v2.indd 1

2014-04-25 4:27 PM

HING

ll business. It's immediately evident that Tyler Pflanz’s Supra speaks for itself. It’s a tuner’s dream and the competition’s worst nightmare. The black on black on black hides some of the finer details, but when it comes to a Supra, that’s just the way you want it. The car has a history for a reason, and Pflanz set out to take that platform and somehow push it to the next level. The Supra owes its roots to Toyota’s Celica and the legendary 2000GT, with the Mark I debuting in 1978 as a Celica Supra, a rear-wheel drive model based on Toyota’s A-platform, the same one used by the Celica until it was reconfigured to the front-wheel drive T-platform in 1985. Using a straight-six motor based on same M engine used in the 2000GT, the Celica Supra was designed to be the preeminent GT car, set to challenge Datsun’s Z, despite a measly output of just 110 horsepower on both the 2.0-liter and 2.6-liter engines. It wasn’t until 1986 and the Mark III MA70 that the Supra effectively cut ties with its predecessor, leading to significant changes that helped create the legend we know today. Suspension was swapped for double wishbones in the front and rear, output was raised to 200 horses and a turbocharger was later introduced. But most notable was the introduction of a new flagship family of powerplants – the JZs. Before the move was made to the new inline sixes entirely, the 7M-GE and 7M-GTE had their swan song as Toyota’s first North American distributorless engines, offering more precise timing and 200 naturally-aspirated horsepower and 230 turbocharged horsepower, respectively. Hinting at Toyota’s vision of the Supra as the ultimate sports car, the Mark III even offered an acoustic controlled induction system to maximize air compression, and user-adjustable electronic suspension. When the first JZ engine hit the pavement, it did so in a monstrous way as the 1JZ-GTE in twin-turbo configuration. Equipping the JZA70 Mark III chassis in 1990, the Japan-only 1JZs stamped their mark with authority, culminating in the 2.5-liter Supra Twin Turbo R with the R154 five-speed transmission, an upgraded Torsen LSD, Bilstein suspension, Recaro seats and more. It was just a hint of things to come. Sure, the Supra’s history could go on for pages – heck, we could do an entire issue on it – but fast forward to Pflanz’s 1993 A80, and it is a perfect culmination of the model’s history. Not only does he keep the beauty of the latest and last iteration of the Supra intact, he expands on each individual aspect with meticulous homage that only adds to its beauty. Pflanz had his first encounter with the Supra when they were still in production. Immediately, the car struck a chord with him. He was too young to drive, too young to know the potential of the car, but there was just something about it that hooked him. “I had seen Corvettes, Vipers, Mustangs, you name it, but none of them had the effect that seeing my first Supra did,” Pflanz says. “This was well before Fast and The Furious, and before the first Supra broke 1,000 horsepower. At the time it was just a car that had that awe inspiring effect on me.” That obsession led to a succession of Supra builds – three, in fact – and while this latest might be the most monstrous of all, it only came after a disastrous fire completely destroyed his previous build, an ultra-rare 3.4-liter twin-scroll 2JZ-GE Supra. “I had just spent years building my 3.4-liter “small” turbo Supra with the JUNE 2014

Performance Tyler Pflanz Supra 16.03-June v2.indd 2

PASMAG

103

2014-04-25 4:27 PM

P E R F O R M A N C E

F E A T U R E

ESSENTIALS

ALL BLACK

1993 TOYOTA SUPRA

EVERYTHING intention of road racing it,” he says. “I basically redid the entire car and it was finally ready to be broken in, but on the way back from Import Face-Off in 2008, the car suffered an electrical fire that was caused when the previous owner suffered a driver side fender collision. The Carfax was clean and he made no mention of this. “I watched as years of my life burned to the ground, trying frantically to keep the fire from spreading. In the end, it was still declared a total loss. I thought I was done building Supras and didn’t want to go through that again.” That was until he laid his eyes on this beast that same year: a fullybuilt 1993 twin-turbo Supra. His original intent was to take the car and compete in drag competitions rather than road races, but within 500 miles of buying it, it nearly suffered the same fate as the last. The engine was imbalanced and failed, the sound system almost caught fire, and there were too many shortcuts on the build to even list. His options were pretty cut and dry: sell it and lose the money and potential, or tear it down and make it into something bigger than he’d ever done. So Pflanz set out to create the ultimate Supra – one that could 104

PASMAG

capture best in show and dominate on the track in the same weekend. At first glance, it might appear he tackled the performance of his new car first, but because his audio was the first thing to fail, it was the first thing he fixed. Starting up front, a JVC KW-XG700 controls a tasteful selection of components and subs: 6.5-inch JBL GTO components in the doors and Alpine Type Rs in the rear. Two JL Audio 10W1v2-8 subwoofers sit neatly tucked in a custom vinyl-matched enclosure underneath the rear glass hatch and are powered by Rockford Fosgate 200a Punch and Power amplifiers, complimented by custom laser-cut plexiglass with a red underlit JL logo. The system provides enough power while still allowing the performance aspects of the car to operate uninhibited. When speed is of the utmost concern, Pflanz

OWNER: Tyler Pflanz LOCATION: Arizona, USA

HORSEPOWER: 1,141 hp TORQUE: 832 lb-ft

ENGINE MODIFICATIONS • Ported and polished • SP81 turbocharger • Koyorad Radiator • CP Pistons .20 over • Carillo H-beam rods • BC Brian Crower (+1 mm valves, valve springs, retainers) • GSC 274 camshafts • Unorthodox cam gears • Accufab 90 mm throttle body • HKS SSQ blow-off valve • Tial (blow-off valve, 44 mm wastegate) • PHR fuel rail • HKS Type R intercooler • 4-in. intake side intercooler piping • 3-in. turbocharger side intercooler piping • Custom 5-in. cold air intake • Sound Performance turbocharger manifold • Customized Virtualworks intake manifold • Injector dynamics Injectors • Walbro triple fuel pumps • SP ABS heat shield • Customized oil catch can • JEGS Elite Series fittings • GReddy (oil cooler, alternator pulley, power steering pulley) • Meziers electric water pump • Dual AAP fans inside shroud • SPAL puller fan (between radiator and intercooler) • Flush mounting bolts (replaced M6 bolts) • 119 studs • Mojo Performance coil packs • XS Power battery

EXTERIOR • Ridox (front bumper, Varis front fenders) • Shine Auto front splitter • LED Light bar turn signals • Custom Bomex side skirts (molded in) • Seibon Top Secret carbon fiber hood • Trial rear bumper • Custom Do-luck Type 1 rear widebody

EXHAUST SYSTEM • Powerhouse Racing (4-in. titanium exhaust, tips) • Sound Performance (manifold, down pipe) • Intense Power 4-in. mid pipe Drivetrain • Getrag V160 transmission (OEM) • RPS (carbon clutch, flywheel) • Torsen Helical LSD WHEELS/TIRES/BRAKES • Niche Monotec Pulse wheels – 19x10 (f), 19x12 (r) • Michelin Pilot Sport tires – 265/35 R19 (f), 345/30 R19 (r) • D2 Racing big brake kit – 8-piston calipers, 356 mm slotted rotors (f) • Rear brake caliper swap to utilize drag wheels • Project Kics Racing composite R40 lug nuts

INTERIOR • Sparco (Monza seats reupholstered in Italian leather with titanium stitching, pedals) • Corbeau 5-point racing harnesses • TRD steering wheel (silver and black) • MVP polished shift knob • TTC (aluminum gauge bezels, aluminum shifter bezel, AC dial bezels) • Line-lock switch on dash • Electric cutout switch in glove box • L.E.D and Sony LCD switches in glove box • Reverse EL glow cluster gauges • 3-gauge A-pillar pod • Defi Gauge (oil pressure, fuel pressure, EGT) • GReddy (Turbo Timer, Profec B Spec-II boost controller) • Rear seat delete (with nitrous bottles and amp rack) • Reupholstered and recovered door panels • NRG floor mats • Custom SFI-spec 6-point roll-cage with removable swingout bars Audio & Multimedia • JVC KW-XG700 double-DIN head unit • JBL GTO 6.5-in. component speakers custom mounted in doors • Alpine Type R 6.5-in. component speakers mounted in rear • Rockford Fosgate (Punch 200a amplifier, Power 200a amplifier, RFC1D 1-Farad capacitor) • JL Audio 10W1v2-8 subwoofers (2) • Custom laser cut plexiglass with red L.E.D. backlit JL Audio logo • Sony I-Frame screens • App-Tronics Stealth Interceptor • Custom upholstered sound system

JUNE 2014

Performance Tyler Pflanz Supra 16.03-June v2.indd 3

2014-04-25 4:28 PM

Untitled-3 1

12/18/2013 5:34 PM

P E R F O R M A N C E

F E A T U R E

can remove the entire enclosure in about 10 minutes. Considering many people expect this car to be all about power, the sound is just icing on the cake. As this, his third Supra build, Pflanz wanted to make it look badder than anything before, so he chose jet-black Aston Martin cosmos paint to dress the car. Covering the Ridox front bumper, front fenders, Siebon Carbon TS hood, Bomex sideskirts, Do-Luck Type 1 rear fenders and Trial rear bumper, the paint gives subtle highlights to the seamless flow of each component for one of the truest exterior Supra builds ever. Paired with the immaculate widebody work, the unison of each individual piece gives the appearance of an OEM Supra on steroids, the way the car was meant to be. Taking that ideology under the hood, Pflanz’s 2JZ is dressed to kill. There’s chrome literally everywhere. It can make some powerplants look too flashy, but here, it

does nothing but intimidate. The beefy Unorthodox cam gears, giant SP81 turbocharger and Sound Performance turbo manifold scream brute power, further reinforced by the Koyorad radiator, customized Virtualworks intake manifold and high-flow PHR fuel rails. Inside the block is an array of parts built to withstand all the power Pflanz can put out, with .20 over CP Pistons, GSC 274 camshafts, BC Brian Crower valves and springs, a complete port and polish and more. When all is said and done, the system cranks out a mind-numbing 1,141 SAE horspower and estimated 832 lb-ft. of torque for a 9.89-second, 154mph quarter mile. If you’re wondering, yes, the Supra is equipped with a six-point roll cage, Sparco racing seats, and Corbeau harnesses. Anyone who knows Supras is aware the stock Getrag V160 transmissions are overengineered to withstand a very high torque limit, but Pflanz is pushing num-

/STREET /DRIFT /CIRCUIT ISC SUSPENSION OFFERS: • • • •

32 WAY ADJUSTABLE DAMPENING CAMBER PLATES PILLOWBALL UPPER MOUNTS THRUST BEARING KIT

• • • •

HEIGHT SEPARATE FROM PRELOAD SHOCK DYNO TESTED 5 YEAR WARRANTY CUSTOM SPRING RATES

OUR PRODUCTS ARE DESIGNED AND SUPPORTED RIGHT HERE IN OUR NEW HAMPSHIRE FACILITY.

WWW.ISCSUSPENSION-NA.COM Performance Tyler Pflanz Supra 16.03-June v2.indd 4

2014-04-25 4:28 PM

Untitle

ALL BLACK

EVERYTHING bers far beyond the norm. To handle shifts under load, he employs an RPS carbon clutch and flywheel before a Torsen Helical LSD transfers that power to the rear wheels. Stopping is provided by an eight-piston D2 Racing big brake kit up front and Supra brake kit in the rear, modified for drag use. Pflanz’s Supra has been making waves throughout the industry

since he completed his six-year project, but many of our readers caught wind of it during last year’s inaugural Tuner Battlegrounds competition and subsequent title showdown at the 2013 SEMA show. Many felt victory was a sure thing as one of the most complete and capable Supras on the continent, and while Pflanz narrowly missed the trophy as the peoples’ choice,

there’s no denying the workmanship in his car. Save for the big brake kit, a set of Niche Monotec Pulse wheels and an App-Tronics Stealth Interceptor, his car came out of the competition the same way it went in. It’s a testament to his vision and the realization of the car he first saw as a kid, back when he wanted to create a Supra that was a class above the rest.

Untitled-1 1 Tyler Pflanz Supra 16.03-June v2.indd 5 Performance

2014-04-22 4:28 9:58 PM AM 2014-04-25

MOBILE ELECTRONICS

F E A T U R E

DON'T BE A

H8R B

1964 LINCOLN CONTINENTAL IS WISEGUY APPROVED

BY DAVE MACKINNON | PHOTOGRAPHY BY IMAGE WERX

ruiser. Gangster. Thug. The sight of an all-black 1964 Lincoln Continental immediately conjures images of The Godfather and big gold jewelry. This Lincoln plays right into that theme. Known as the "H8R," this build is replete with a gangster-themed design. So, sits yourself back and reads a bit wit us, won’t cha? Gangsters are known to play both sides of the law. Working with the cops when it suits them and, well, doing what they have to when it doesn’t. This Lincoln shares a similar split personality when it comes to the design of the audio system – high-end gear and a clean installation, but with a few secrets hidden up its proverbial sleeves. The heart of any audio system is the source unit and, frankly, the Clarion HX-D3 is one of the best. No frills, no cheap tricks, no bells and no whistles – it’s just a CD receiver that sounds amazing. The installation team at 360 Fabrica-

108

PASMAG

tion in Abbotsford, BC built a custom leatherwrapped pod for the HX-D3 under the dash, and audio is sent rearward to a quartet of Clarion amplifiers. A pair of XH5410 four-channel amps produces 90 watts per channel to the mids and highs while two XH7110 amps each provide 850 watts to four Clarion 10-inch subwoofers. 360 Fabrication has created custom H8R logos and tastefully blended them into the install, which features stitched leather upholstery and hydro-dipped trim panels with a tortoise shell print to keep a stock look. The front stage speakers are an ultra-rare three-way component set from Clarion. The SRD1701S set is installed in custom pods in each of the front doors. The midrange and tweeter are located just ahead of the door pull while the 6.5-inch woofer is integrated into a new custom armrest. For rear fill, a set of equally rare Clarion SRD1700S 6.5-inch two-way components are installed on the rear deck.

JUNE 2014

360 Fabrication Lincoln v2.indd 1

4/25/2014 2:51:38 PM

Untitled-1 1

2014-04-15 3:46 PM

MOBILE ELECTRONICS

F E A T U R E

DON'T BE A

H8R

360 Fabrication Lincoln v2.indd 2

4/25/2014 2:52:10 PM

Untitle

THE ‘SPARE TIRE’ ARSENAL CAN BE REMOVED FROM THE TRUNK QUICKLY AND EASILY IN THE EVENT A ROAD TRIP IS PLANNED.

The real artwork takes place in the massive trunk of the 18-foot Lincoln. 360 started with a pair of custom fiberglass enclosures on each side of the car. The enclosures each house two Clarion WQ2510D 500-watt subwoofers. The sealed design ensures tight, controlled bass and plenty of low frequency output. The enclosures are molded into custom trim panels that adorn the rest of the trunk and all are wrapped in dark gray vinyl with neat and tidy stitching on the seams. In the center of the trunk is what looks like a spare tire cover, but this is the first of several hidden gems in this beauty. Slipping the tire back and opening the bottom cover reveals a set of handcuffs, a pair of brass knuckles and home for a pair of pistols – all trimmed in purple velour. The ‘spare tire’ arsenal can be removed from the trunk quickly and easily in the event a road trip is planned. That, my friends, is far from the end of the story in the trunk where yet another hidden compartment can be found by those with keen detective skills. On the back wall of the trunk is another leather-trimmed, H8R logo-adorned panel. But, if you pull it down and slide the drawer out, you will find yourself a bottle of Crown Royal and a quartet of tumblers – perfect to celebrate an afternoon’s hard work... at the bank, perhaps?

Music is in the air here, it’s in our blood. Memphis isn’t just a catchy name for us, it’s who we ARE. It’s also in our product. You know when that favorite track comes around and you feel like turning it up just a little bit more? Memphis gear delivers. Visit us at www.memphiscaraudio.com to find an authorized dealer near you and see what we mean when we say MEMPHIS MUSIC!

memphiscaraudio.com 360 Fabrication Lincoln v2.indd 3 Untitled-4 1

4/25/2014 2:52:43 2014-04-10 1:14PM PM

MOBILE ELECTRONICS

F E A T U R E

DON'T BE A

H8R

The floor of the trunk is finished in black wool carpet and has a Lexan window that exposes the four Clarion amplifiers installed under the floor. The amps are fed by Wirez Signature Series power wire and distribution blocks while audio signals are passed by Wirez Signature interconnects and speaker wire. There are two Wirez two-farad stiffening caps to ensure the instantaneous current demand from the nearly 2,500 Wrms of amplifier power is readily available. Further power comes from two Kinetik KHC1800 power cells. The mighty Lincoln has received a lot more than just an amazing audio install from the gang at 360 Fabrication. The body of the car was cleaned up, sanded perfectly smooth and coated with three layers of BASF black and three coats of clear, each one hand-sanded to a mirror finish. The bumpers along with the front grill have been re-chromed to ensure the exterior

look is on par with the recreated and reupholstered interior. Overall, more than $75,000 has gone into the H8R project by its Chilliwack, BC-based owner. He’s a big fan of Lincolns, and also owns a ’63 Lincoln Roadster and ’64 Lincoln convertible along with a ’57 Chevy and ’65 AC Cobra, to name a few. But, the H8R turned into a fun and unique project. It’s subtle and understated, but leaves a lasting impression on anyone that sees it. And, with its amazing audio system and its original 400-horsepower big block V8 under the hood, it’s undoubtedly the perfect ride to cruise the financial district with.

ESSENTIALS

1964 LINCOLN CONTINENTAL BUILT BY: 360 Fabrication ENGINE: 1963 Lincoln 4.3L V8 (numbers-matching) HORSEPOWER: 400 hp (est.) EXTERIOR Re-chromed grille and bumpers • BASF water-based paint (three coats wet-sanded and polished) • HID headlight upgrade INTERIOR New carpet and upholstery • Custom door panels • H8R emblems with Lincoln logo integration • Radio pod • Embroidered floor mats AUDIO/MOBILE ELECTRONICS Clarion (HX-D3 head unit, HX5410 4-ch. amplifiers (2), XH7110 subwoofer amplifiers (2), SRD1701S 3-way component set, SRD1700S 2-way component set, WQ2510D 10-in. subwoofers (4)) • Wirez (14AWG Signature Series speaker wire, 0AWF Signature Series power wire, PDS-4 distribution blocks (2), CAPDPD-2F 2-farad stiffening caps (2), RCASBK-17 Signature Series interconnects (4), 350 sq-ft. Wirez premium sound deadening) • Kinetik KHC1800 power cells (2) • Rear/trunk install (fiberglass sub enclosures, floating floor amp rack, custom fake spare tire/tray, custom slide-out bar)

112

PASMAG

JUNE 2014

360 Fabrication Lincoln v2.indd 4

4/25/2014 2:53:42 PM

Untitled-1 1

2013-04-05 2:21 PM

COMPETITION Jacob's Drift

Facebook: /JacobLevetonDrift Website: www.jacobphoto.com

10 FORMULA D BIGGEST HEADLINES FROM

STORY & PHOTOGRAPHY BY JACOB LEVETON

ROUN L O N GD 1 : B E AC H

Formula Drift’s 11th season kicked off in the Streets of Long Beach, which has served as the season opener for nine straight years. The course packed more than 20,000 fans into the stands and the podium included a first-timer, a former champion and the defending champion. As the rest of the season shakes itself out, here are a few headlines from Long Beach that are worth noting.

114

PASMAG

01/

02/

03/

Forsberg and Essa are back to contend for the Title

Dai Yoshihara’s BRZ is the craziest off-season build

The rookie class is strong

Last year, Forsberg and Essa had a heated battle throughout the season, meeting three times in tandem competition. Both looked sharp in the first event of the season, and both landed on the podium although they didn’t face one another. We expect the rivalry between these two to continue to grow this season.

While there are only a handful of new builds this season, Dai Yoshihara’s turbocharged Chevy LS7-powered Subaru BRZ is the craziest build we’ve seen in quite a while. Completed by the team at SPD Metalworks, the car features some amazing engineering and has been several months in the works. We look forward to getting a closer look at it in future rounds.

Alex Hohnadell and Geoff Stoneback both had great battles in the Top 32 tandem round, looking just as competitive as many drivers who have been competing for several seasons. Last season, not a single rookie qualified in Long Beach, and many felt that the rookies weren’t very competitive overall. This year, the first-timers is a group to watch closely!

JUNE 2014

Jacobs Drift Insider 16.03-June.indd 1

2014-04-25 4:43 PM

always built to order. never off the shelf.

available on all models

At Fortune Auto we donâ&#x20AC;&#x2122;t believe you should settle for an off-the-shelf suspension solution. When you call to order our customized shocks, our knowledgeable staff will help you create the perfect suspension setup for your specific needs. Our coilovers offer customized spring rates, customized shock valving, and full rebuild capabilities. The experienced Fortune Auto staff is dedicated to researching and developing products that will drastically improve safety, performance, and comfort. Once we've developed and built a new product, our team tests it in the harshest environment possible- the race track. We find maximum performance results on our own race cars and then bring that experience and research to you. Since our North American facility has full-service capabilities from re-valving to shock rebuilds, we guarantee you will get the best service and the best product in the industry

bespoke suspension

shock dyno verified

rebuildable in the USA

fortune-auto.com

info@fortune-auto.net

1.877.227.0260

Untitled-1 1

2014-04-24 10:13 AM

COMPETITION Jacob's Drift

04/

05/

Nexen Tire out, GT Radial in as Formula D tire sponsor

Hyundai has two cars in the series for the first time ever with Team ARK Performance

Late in the offseason, Nexen decided not to return to Formula D as a tire sponsor. This sent Odi Bakchis (Nitto), Ryan Kado (Yokohama), Joon Maeng (Maxxis), and Kyle Mohan (GT Radial) into a scramble to find new sponsors. For Mohan and rookie Tyler Wolfson, they are the first two drivers on GT Radial’s SX2 tires, keeping the number of FD tire suppliers at eight.

Rhys Millen competed in a Hyundai Genesis Coupe from 2009 to 2012, but for the first time ever, two Genesis Coupes will be competing in the series. Dennis Mertzanis will be piloting a newlybuilt Gen Coupe for Team ARK Performance, which is powered by a supercharged LS7. His former V6 turbocharged car will be driven by new teammate Pat Mordaunt.

Untitled-3 Jacobs Drift1Insider 16.03-June.indd 2

06/ Keep an eye on Kenny Moen this season Kenny Moen has been competing in Formula D for several seasons now, but his freshly-built Achilles Tire S14 looks much more competitive than his 350Z. His podium finish in Long Beach could mean a promising season is in store for the Norwegian driver.

07/

Ryan Kado, Matt Field and Chris Jeanneret had mechanical gremlins We hate to see a driver unable to turn a tire on track all weekend, but for all three drivers, that was the case in Long Beach. Both Jeanneret and Kado’s cars simply weren’t completed until a few hours before the first competition. Look for both Jeanneret’s Honda S2000 and Kado’s 350Z to be sliding shortly. Field’s car was seen in the pits, but some tuning issues kept him from competing. All three will be looking to make up for lost time in the next round at Road Atlanta.

2014-04-22 AM 2014-04-25 10:05 4:44 PM

Racing

10:05 AM

08/

09/

10/

Third place is now decided by qualifying order

Canadian drivers are looking stronger than ever

Due to time restraints, Formula D has decided that the third-place consolation battle will no longer happen. Instead, the lowest platform on the podium will be decided on qualifying order. At Long Beach Essa earned third place as the top qualifier over Justin Pawlak, who qualified sixth.

For the first time ever, three Canadian drivers are looking to run a full season. Last season’s Rookie of the Year Mats Baribeau (Brockville, Ontario), Dave Briggs (Richmond Hill, Ontario) and Marc Landreville (Montreal, Quebec) all qualified for the Top 32 tandem in Long Beach, and each had great battles. Baribeau earned a Top 16 appearance while Briggs pushed Formula D powerhouse Vaughn Gittin Jr. to a ‘one more time.’ All three look promising based on their Long Beach performances.

PASMAG presents the 2014 FD Program Guide and 10th Anniversary Commemorative Photo Book For the third consecutive year, PASMAG has partnered with Formula D to present the 2014 Program Guide. Read interviews with the defending champion Mike Essa, Baribeau and check out the anatomy of a drift car. Be sure to place your order for a copy of the limited edition 10th Anniversary Commemorative Photo Book. Don’t delay as copies will only be available for a short time and are expected to sell out!

2014 MAZDA 6 SKYACTIV EXHAUST

MAZDA PERFORMANCE SPECIALISTS FOR OVER 40 YEARS

ROTARY EXHAUST INTAKE SUSPENSION ENGINE ECU UPGRADE

RX-8 RX-7 MIATA MAZDA 3 & 6 PROTEGE CX-5 MIATA/MX-5

ENGINEERED HANDCRAFTED BY RACING BE

THE WORLD’S LARGEST MANUFACTURER OF ROTARY PERFORMANCE PARTS FOR RX-7 AND RX-8 4789 E WESLEY DRIVE, ANAHEIM, CA 92807 T: 714-779-8677 F: 714-779-2902

WWW.RACINGBEAT.COM

Racing Beat.indd Jacobs Drift Insider116.03-June.indd 3

4:27 PM 2014-04-25 4:44

COMPETITION

TILTON WHIRL A 980-HORSEPOWER FORCE OF NATURE STORY & PHOTOGRAPHY BY MICHAEL FINGER

The sport of Time Attack is evolving as fast as the cars develop. Motorsport governing bodies and event organizers continually review and tweak rules to align competition and safety levels. Teams develop their cars into hair-trigger, high horsepower beasts with advanced aero packages in order to put the power to the ground. This is yet another unique form of motorsport that originated in Japan. Initially contested by aftermarket tuning and parts companies to showcase their market offerings, the cars are losing weight and gaining state-of-the-art aerodynamic features. It is no longer all about horsepower when it comes to beating the clock; itâ&#x20AC;&#x2122;s a showcase of engineering technology. The Australian Tilton Interiors Mitsubishi EVO IX has taken on further development in the quest for victory. Not content with second place at the 2012 World Time Attack Challenge and determined for title victory at the 2013 event, the team travelled to the birthplace of the sport: the Tsukuba Circuit in Shimotsuma, Japan. Lessons learned from the trip were applied to further develop the EVO. Apart from track time at Tsukuba, the team spent joined Voltex at Mie Universityâ&#x20AC;&#x2122;s wind tunnel in Suzuka to significantly develope the aerodynamic package. The suspension geometry has been reconfigured to compliment the stability of the new aerodynamics. A reliable and powerful Borg Warner EFR turbo now charges air into the 980-horsepower fourcylinder engine. With development driver Garth Walden behind the wheel, the EVO posted an outstanding lap time at the 2013 World Time Attack Challenge. On day one of the two-day event, Walden posted a lap time of 1:24.855, which was 2.5 seconds clear of the competition for the entire event. In a form of motorsport where the field is separated by fractions of second, 2.5 seconds is a huge margin. The Tilton 118

PASMAG

JUNE 2014

WTAC Champ Tilton EVO9 16.03-June v4.indd 1

2014-04-25 4:05 PM

[Time attack is] no longer all about horsepower when it comes to beating the clock; it’s a showcase of engineering technology.

ESSENTIALS

MITSUBISHI LANCER EVO 9 CT9A OWNER: Garth Walden BUILT BY: TM Automotive LOCATION: Sydney, Australia HORSEPOWER: 980 hp (est.)

Interiors team had the goal of making significant improvement over their second place finish in 2012, and all of their efforts proved to be worth it. Sydney Motorsport Park is the home track for both Walden and the car. In fact, Walden works there as part of the Radical SR3RS Driving Experience offered at the facility. The Tilton EVO is a marvellous piece of machinery with world-class fabrication and development. It’s all of the small details – the clips holding the top of the front door frames closed, the induction box, the driver’s footrest – that make this car great. Observing the body of the car seems an endless game of ‘what’s the coolest thing?’ Each vent, fin, canard and panel is a marvel of technology. The electronics, while simple in appearance,

are highly complex. The Motec dash sits most prominently and additionally there are a number of other Motec items that contribute to the EVO’s speed. A centre diff controller and power distribution module are part of the system, too. There is a series of sensors in the wheel arches placed to measure tire temperatures, which helps find tiny bits of time and aids in further development. About that 980 horsepower; it’s not a typo, nor a figure pulled out of thin air just to impress. The team states that it's 980…plus! How does the little 2.2 liter do it? It has the best Cosworth internals, in addition to a massive BorgWarner turbo and a group of other systems that work together. There are other secrets that must be kept, though. After all, this is serious competition.

ENGINE MODIFICATIONS • 2.2L 4G63 Full House Cosworth with dry sump • Hypertune intake manifold • CNC machined billet runners • 94 mm stroke • 86 mm bore • BorgWarner SX366 turbo • Hypertune 4-in. intercooler • PWR oil cooler • PWR radiator • Vipec CDI ignition EXHAUST • 3.5-in. DRIVETRAIN • Hollinger 6-speed sequential • Widened front wheel track EXTERIOR MODIFICATIONS • Full Voltex aero body kit with custom under tray CHASSIS • Mitsubishi CT9A, Chromoly tube front and rear subframes SUSPENSION • MSI billet aluminum uprights (developed by MSI & Sierra Sierra) • MCA Suspension mono ball type dampers and Eibach ERS springs WHEELS/TIRES/BRAKES • Rays RE30 wheels • Yokohama AO50 tires • Alcon 6-piston calipers, 355 mm discs (f/r) INTERIOR • AP Racing pedal box • Racetech carbon Kevlar seat • Full CAMS spec steel roll cage • Motec M800 ECU • E888 expander unit • MDC Centre differential controller • PDM30 power distribution module • ADL3 dash logger • i2 data analysis software • Braille ML14C carbon fiber lithium-ion battery

JUNE 2014

WTAC Champ Tilton EVO9 16.03-June v4.indd 2

PASMAG

119

2014-04-25 4:05 PM

COMPETITION

AUDIO(PRO)PHILES

dB Drag, IASCA, MECA, USACi: the competitions might be different, but the passion is the same. In our new car audio competition profiles, we'll be showcasing some of the most dedicated and decorated members of the car audio community to see just what got them to the top of the podium.

ED RICE

2008 Nissan Titan

COMPETITION CLASS

USACi Modified Class, IASCA IQC HEAD UNIT

Rockford Fosgate (Nissan OEM) AMPLIFIERS

2011 Nissan Sentra

COMPETITION CLASS

USACi Modified Class, IASCA IQC HEAD UNIT

Clarion NX-501 AMPLIFIERS

MIKE WIRTH

2012 Toyota 4Runner

COMPETITION CLASS

USACi Modified SQ+ HEAD UNIT

Alpine 920HD SIGNAL PROCESSING

Precision Power (PC 4400 (2), PC 2300, PC 2400)

Precision Power PC740.5 (2)

SUBWOOFERS

Precision Power PC.12 Dual 2 ohm

SPEAKERS

Precision Power (PC3.65c, PC.692)

POWER DISTRIBUTION

JBL MS.8 processor, Scosche EFX wiring, Sears Diehard Platinum battery

Audible Psychics NZ3, JL Audio ZR800, Hertz Coaxials

UNIQUE FEATURES

POWER DISTRIBUTION

INSTALL SHOP/INSTALLERS

Advanced Audio with Jerod Chastain, Jacob Schnur, myself

Precision Power A.8SQ (2) Precision Power PC3.65C Rockford Fosgate 360.2 processor (2), Scosche EFX wiring, Sears Diehard Platinum battery UNIQUE FEATURES

The install is completely stealth with the back seat down. INSTALL SHOP/INSTALLERS

Ed Rich and Darin Laughard REASON FOR VEHICLE CHOICE

We previously used my wifeâ&#x20AC;&#x2122;s car to compete, but last year I built this truck. SHOUTOUTS

Darin Laughard and the Power Precision team

120

SURINA RICE

PASMAG

SUBWOOFERS

SPEAKERS

POWER DISTRIBUTION

The front of the sub box is plexiglass, rather than the back. Ed Rich and Darin Laughard REASON FOR VEHICLE CHOICE

I missed having a system in my car after taking my husband's truck to SBN 2011, so we talked to Grizz Archer and got the ball rolling. SHOUTOUTS

Darin Laughard and the Power Precision team

Precision Power PC740.5 (2) AMPLIFIERS

Massive Audio SUBWOOFERS

Alpine Type R (4) SPEAKERS

Stinger cables

INSTALL SHOP/INSTALLERS

REASON FOR VEHICLE CHOICE

Rugged, dependable daily driver SHOUTOUTS

All my friends and installers who helped with the build. It was my first year of competition and a great learning experience for all of us.

JUNE 2014

Car Audio Competitor Profiles.indd 1

4/25/2014 6:07:04 PM

Untitled-2 1

2014-04-07 3:35 PM

Show season is officially upon us, and that means the second running of Tuner Battlegrounds is here! Last year, 580 competitors entered to win a trip to SEMA and a showdown to become the people’s choice as the best tuner car in North America. In the end, nearly 120,000 votes were cast online and via text, and we’re back to do it bigger and better! The 2014 lines are officially open! Register at TunerBattlegrounds.com to showcase your ride, face off against other top competitors and battle it out for SEMA glory! Here’s a look at some of the entries we’ve received so far...

MELVIN IARA

320 HORSEPOWER

1993 Toyota Aristo RHD LOCATION LONG ISLAND CITY, NY, USA FAVORITE MOD: AIR SUSPENSION SPONSORS: D2

PETE YONG

N/A HORSEPOWER

1991 Honda Civic SiR LOCATION BRAMPTON, ON, CAN FAVORITE MOD: WINDOWS 7 MEDIA SYSTEM SPONSORS: N/A

122

PASMAG

JUNE 2014

Tuner Battlegrounds Garage_V2.indd 1

2014-04-25 2:30 PM

BRANDON MA 235 HORSEPOWER

2005 Honda S2000 LOCATION RICHMOND, VA, USA FAVORITE MOD: SPOON FRONT BUMPER SPONSORS: N/A

GREG BALANDYK 280 HORSEPOWER

2000 Lexus LS 400 LOCATION PONTIAC, MI, USA FAVORITE MOD: RED INTERIOR SPONSORS: N/A

GEOFF BERENZ

240 HORSEPOWER

1997 Audi A4 1.8T LOCATION PICKERING, ON, CAN FAVORITE MOD: RECARO SEATS SPONSORS: PODI

JORGE SANDOVAL 237 HORSEPOWER

1994 Honda Civic CX LOCATION SAN JOSE, CA, USA FAVORITE MOD: K20A ENGINE SWAP SPONSORS: NSIDIUS INDUSTRIES

JUNE 2014

Tuner Battlegrounds Garage_V2.indd 2

PASMAG

123

2014-04-25 2:30 PM

JOSH CHANG

285 HORSEPOWER

2005 Infiniti M35 LOCATION TRACY, CA, USA FAVORITE MOD: WIDEBODY WORK SPONSORS: AME WHEELS, ARMORED DOWN STUDIO, AUTO RND, DIAMOND AUTOBODY, FIZZ AUTOSPORTS, K-BREAK, TOYO TIRES, UPSCALE NATION

LUKASZ WIERZBICKI 50

HORSEPOWER

1961 VW Beetle

LOCATION MISSISSAUGA, ON, CAN FAVORITE MOD: CUSTOM SELF-MADE AIR RIDE SPONSORS: N/A

lutch kit is ce, every Bully Cing only the en ri pe ex of s ar With over 80 ye-house with top craftmanship us assembled in ed materials. best research

BULLYCLUTCH.COM I 1-800-661-9700 1171 NEWMARKET I OTTAWA, ON I CANADA Tuner Battlegrounds Garage_V2.indd 3 Bully.indd 1

2014-04-25 10:28 2:31 PM 2014-02-27 AM

RYON CHANDLER 300 HORSEPOWER

1998 Lexus GS 400 LOCATION ROSEVILLE, CA, USA FAVORITE MOD: STATIC DROP SPONSORS: N/A

SAM PIAZZA

600 HORSEPOWER

2010 Chevrolet Camaro SS Turbo LOCATION LA MIRADA, CA, USA FAVORITE MOD: TURBONETIC TURBO KIT SPONSORS: CONTINENTAL TIRES, MEGUIARS, RIDESKINZ CUSTOM AUTOMOTIVE DESIGN, WHITELINE, TURBONETICS, AEM, ACT ADVANCED CLUTCH TECHNOLOGY, SCOSCHE

ULTIMATE SOUND UPGRADE

THE BOOM MAT WAY!

Boom Mat Spray-On eliminates vibrations and greatly improves acoustics in hard to reach places. Speaker Baffles protect speakers while enhancing audio quality.

Batcap model 4000!

THERMAL ACOUSTIC CONTROL

New Heavy Duty termiNals 15% iNcrease iN Power THERMAL ACOUSTIC CONTROL

(800) 264-9472 BoomMat.com

0 A

10:28 AM

New and improved

Available at:

Jegs.com

THERMAL ACOUSTIC CONTROL

SummitRacing.com SpeedwayMotors.com

Xstatic LLC 561 Sanders Road Newton, AL 36352

XStatic-Batcap 1_4th 15.05.indd 1 THERMAL ACOUSTIC CONTROL

Tuner Battlegrounds Garage_V2.indd 4

(334) 692-4650 batcap.net xstaticbatcap@yahoo.com

2013-07-29 9:55 AM

THERMAL ACOUSTIC CONTROL

2014-04-25 2:31 PM

D IR ECTORY

SHOP LISTINGS 949 MOTORING Online Store 949motoringinc.com (949) 302-6877

949 RACING Lake Forest, CA 949racing.com (949) 716-3111

ANDYâ&#x20AC;&#x2122;S AUTO SPORT Morgan Hill, CA andysautosport.com (408) 500-4840

AQ MOTORSPORTS Torrance, CA aqmotorsports.com (310) 539-9010

AUTO WAVE INC. Huntington Beach, CA autowaveinc.com (714) 841-2433

IAG PERFORMANCE

RALLYSPORT DIRECT

VELOCITY FACTOR

Westminster, MD iagperformance.com (410) 840-3555

Draper, UT rallysportdirect.com (888) 257-2559

Boca Raton, FL velocityfactor.net (561) 395-5700

INNOVATIVE TUNING

RANZ MOTORSPORTS

WILSON PERFORMANCE

Buffalo, NY innovativetuning.com (716) 873-7360

South El Monte, CA ranzmotorsports.com (626) 448-8693

Rochester, NY rhwracing.com (585) 750-4995

INTENSE POWER

SMART SERVICE

ZEN MOTORS

Tucson, AZ intensepower.com (480) 635-8888

Mukilteo, WA smart-service.com (206) 417-0880

Suwanee, GA zenmotorsllc.com (770) 932-6302

INVISION AUTO IMPORTS Edmonton, AB iaimports.com (780) 433-9699

JOTECH MOTORSPORTS Garland, TX jotechracing.com (972) 494-1300

KAIZEN TUNING Boxborough, MA kaizentuning.com (978) 266-9900

DIX PERFORMANCE

LIGHTSPEED INNOVATIONS

Edmonton, AB dixperformancenorth.com (800) 661-9327

Red Deer, AB lightspeedinnovations.com (866) 958-4732

DTM AUTOBODY

MODERN AUTOMOTIVE PERFORMANCE

El Monte, CA dtmautobody.com (626) 448-0903

ELITE AUTO WORKS NY Goshen, NY eliteautoworksny.com (845) 615-9090

EVASIVE MOTORSPORTS Santa Fe Springs, CA evasivemotorsports.com (626) 336-3406

HIGH END PERFORMANCE

SPEED ELEMENT San Jose, CA speedelement.com (408) 573-8899

SR AUTO GROUP Richmond, BC srautogroup.com (604) 279-5563

STM TUNED Spencerport, NY streettunedmotorsports.com (585) 226-8226

SUBIMODS

EVERYTHINGDRIFT.COM everythingdrift.com

MONTREAL RACING montrealracing.com

MOTORMAVENS motormavens.com

TARETT ENGINEERING

SPEEDHUNTERS

fatlace.com

Cottage Grove, MN maperformance.com (763) 545-3800

San Diego, CA tarett.com (858) 674-5573

MZM PERFORMANCE

TEKNOTIK

Austin, TX mzmperformance.com (512) 837-6200

Scarborough, ON teknotik.com (416) 907-3851

NEXTMOD

TIRES 23

Markham, ON nextmod.com (416) 800-9139

Mississauga, ON tires23.com (905) 602-8881

STREET SWEEPER GANG V2LAB

TITAN MOTORSPORTS

Laval, QC perryautolaval.com (450) 662-8886

Orlando, FL titanmotorsports.com (407) 277-8423

HYBRID RACING

RALLY INNOVATIONS

Baton Rouge, LA hybrid-racing.com (225) 932-9588

Anaheim, CA rallyinnovations.com (714) 396-1851

TOPSPEED MOTORSPORTS

Directory.indd 1

canibeat.com

SLAMMED SOCIETY

PERRY AUTO

PASMAG

CANIBEAT

Bloomfield, CT subimods.com (860) 447-9912

Farmingdale, NY highendperformance.org (631) 323-8177

126

WEBSITE LISTINGS

Alpharetta, GA topspeedtuned.com (678) 297-7770

speedhunters.com

STANCE IS EVERYTHING stanceiseverything.com

STANCE WORKS stanceworks.com

STANCE:NATION stancenation.com

streetsweepergang.com

v2lab.com

SNTRL sntrl.com

HOONIGAN hoonigan.com

JUNE 2014

4/25/2014 8:12:29 PM

CAR CLUB LISTINGS SWIFT AZ, CA, FL, HI, IL, NV, TX, Spain, Japan swiftcc.net

SHOCKWAVE Chicago, IL shockwavecustoms.net

SOLO

IMPORTFEST

CA, FL, MD, NJ, NY, OH, TX teamsolo.net

Toronto, ON importfest.com

LIBERTY VIP CA, FL, HI, MD, NJ, NY, NV, PA, VA, Canada, Japan liberty-vip.com

JADE CREW CA, FL, GA, TN jadecrew.com

LIFESTYLE LISTINGS WHAT MONSTERS DO

VAPOR SOLUTIONS Fullerton, CA vapor-solutions.com

FLIPZCO

Southern California ar-kan.com

Belleville, NJ flipzco.com

PLATINUM VIP Southern California platinumvipmotors.com

TEAM ECR Lawrence, MA teamecr.org

R-RYDES

NISSAN INFINITI CAR OWNERS nicoclub.com

VIP STYLE CARS VW VORTEX

SUNWORKS

ACURAZINE

AR, CA, FL, NY, OK, TX www.eamsunworks.com

SCIKOTICS National (USA) scikotics.com

HYBRID

acurazine.com

ZILVIA.NET zilvia.net

SUPERHONDA.COM superhonda.com

GENCOUPE.COM

TUNINGWERKS COMPETITION

TOYOTA NATION

EMOTION DE, FL, MA, MD, GA, IL, NC, NJ, NY, TX, PA, VA emotioncrew.com

ILDS:FACTION Florida ilovedrivingslow.com

NOKTURNAL AZ, CA, FL, GA, NY, NV, TX nokturnalcarclub.org

Toronto, ON tbabbrand.com

EAT SLEEP RACE Piscataway, NJ eatsleeprace.com

vwvortex.com

CA, GA, NV, TX teamhybrid.com

California tuningwerkscompetition.com

TBA BRAND

vipstylecars.com

Southern California rrydes.com

gencoupe.com

toyotanation.com

NORTH AMERICA SUBARU IMPREZA OWNERS CLUB nasioc.com

AUTOMOTIVE FORUMS automotiveforums.com

AIR SOCIETY airsociety.net

JDM CHICAGO jdmchicago.com

National (USA) importfaceoff.net

Keller, TX whatmonstersdo.com

AR-KAN

FORUM LISTINGS

IMPORT FACE-OFF

EVENT LISTINGS ALL IN TUNING

KMS T NIGIHFT DR

KMS DRIFT, DRIFTING CAR SHOW, CAR MEET AND DRAG RACING ROCKINGHAM DRAGWAY SOUTHERN PINES, NC.

SATURDAY

Beijing, China allintuningchina.com

AUGUST 2, 2014

CSCS

www.kossmotorsports.com

Toronto, ON cscs.ca

DBDRA National (USA) termpro.com

FORMULA DRIFT National (USA) formulad.com

FRESH MEET EVENTS Camden, NJ fr3shmeet.com

OC CAR AND TRUCK SHOW

10:00AM - 5:00PM

MECA National (USA) mecacaraudio.com

TUNER EVOLUTION Philadelphia, PA tuner-evolution.com

USACI National (USA) soundoff.org

USDRIFT

Ocean City, MD occarshow.com

National (USA) usdrift.com

IASCA

WATERFEST

National (USA) iasca.com

Englishtown, NJ waterfest.net

JUNE 2014

Directory.indd 2

PASMAG

127

4/25/2014 7:45:12 PM

J U N E 2014

SU M T W TH F S SU M T W TH F S SU M T W TH F S SU M T W TH F S SU M

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

DIAL IN FINISH: GLOSS BLACK (SHOWN), GLOSS WHITE, GLOSS GOLD AND MATTE GRAPHITE SIZE: 15X7, 15X8, 15X9 (LOW OFFSETS AVAILABLE)

KONIGWHEELS.COM

KARLI SAL

PHOTOG RAPHY BY LU CIO F RATELLI (LU C I O F R AT E LLI . C O M)

LOCATION: TORONTO, ON MEASUREMENTS: 32D-25-32 HEIGHT: 5’6” ETHNICITY: SPANISH DOB: APRIL 22 ZODIAC: TAURUS CAR: 2007 PONTIAC G5

WHAT DO YOU LIKE MOST ABOUT YOURSELF? People always comment on my stomach as well as my eyes. They say I have an exotic look which makes me different than others. Also, I’m very laid back and easy to get along with.

WHAT DO YOU DRIVE? I drive a blue 2007 Pontiac G5 with 17-inch wheels and a decent sound system that I've been working on myself. Next up [are some] tinted windows. I love my car’s color as well as the drive, but I wish it had a black interior instead of gray. I wish it was comfier too!

DO YOU HAVE A DREAM CAR? White Audi R8. You gotta love German exotic cars. Every time I see one I end up groaning or squealing! They just do things to me.

PASMAG.COM/KARLISAL KARLIVANESSASAL @KARLIVANESSASAL @KARLICAKES

Konig Calendar 16.03-June.indd 1

2014-04-24 11:51 AM

D IR ECTORY

3 YEAR

SUBSCRIPTION (30 ISSUES)

FOR ONLY

$37.99 S U B S C R I B E O N L I N E N O W AT WWW.PASMAG.COM/SUBSCRIBE ORDER TODAY @ FD10.PASMAG.COM

(ENTER PROMO CODE: JUNE2014) SIGN UP NOW AND GET A PASMAG T-SHIRT FREE!

AD INDEX AEM Induction Systems

128 full color pages. No ads. All Formula Drift. Price $49.99 - includes FREE shipping within North America!

Formula Drift .......................................................130

Nitto Tire ..................................................................35

Fortune Auto North America .......................115

OPTIMA Batteries ............................................... 15

Garrett by Honeywell ........................................65

ORACLE Lighting INC ......................................39

- Option Auto Salon .........................................23

GO PUCK.................................................................105

Orion High Performance Car Audio ..........17

All In Tuning China Show ..............................43

HiFonics .....................................................................49

OSRAM SYLVANIA LTD. ................................ 132

American Bass ........................................................11

HSD Suspension - JRP ........................................5

Parrot, Inc .................................................................29

Arc Audio Inc ..........................................................47

Installer Institute .................................................86

PASmag ...................................................................... 61

ARP - Option Auto Salon ................................121

ISC Suspension North America ................ 106

Philips ......................................................................... 61

Audiopipe .................................................................87

JL Audio .....................................................................55

PIAA Corporation ................................................85

Autoglym ..................................................................33

JRP - Johnston Research

Powerbass ................................................................ 81

Axxera ........................................................................54

& Performance ......................................................4

Raceland USA ........................................................ 69

Batcap by Xstatic ...............................................125

Kenwood USA .........................................................21

Racing Beat .............................................................117

Boom Mat ...............................................................125

KICKER ......................................................................57

Red Line Synthetic Oil ......................................73

BorgWarner Turbo Systems ...........................67

Knukonceptz.com ................................................84

Rockford Fosgate ..................................................53

Bully Performance Clutch Inc. ...................124

Koyo Cooling Systems

Spec Inc ...................................................................... 91

Clarion ........................................................................25

- Option Auto Salon ......................................... 31

D2 Racing North America ..............................116

Kumho Tires .............................................................9

DD Audio ................................................................... 51

Lightning Audio ................................................. 109

- Motovicity .......................................................... 71

DENSO - Option Auto Salon ..........................22

Lumens High Performance Lighting .........12

Torco International Corp. .............................107

Dynamat ................................................................... 18

MB QUART ..............................................................59

Toyo Tire U.S.A. Corp. .......................................... 2

Energy Suspension - UltraRev.com ...........72

McGard ......................................................................10

TSW Wheels ............................................................95

Enjuku Racing Parts, LLC. .............................90

Meguiar's Inc. ..................................................75, 77

Ultra Wheel Company, Inc ............................. 96

Escort Inc. ................................................................. 13

Memphis Car Audio ........................................... 111

Verde Custom Wheels .......................................83

EXEDY Globalparts Corporation ................37

MOSCONI US - ORCA Design

Vossen Wheels .........................................................6

Fast Wheels .............................................................63 Focal - ORCA Design & Manufacturing Corp. .................................79

ST Suspensions ....................................................131 Tokico Performance Shocks

& Manufacturing Corp. ................................113

Whiteline US ......................................................... 110

Neo Motorsport America Inc. ..................... 101

Wirez ...........................................................................27

Niche Road Wheels ...............................................8

JUNE 2014

Directory.indd 3

PASMAG

129

4/25/2014 8:07:06 PM

Untitled-2 1

2014-04-22 9:56 AM

Untitled-2 1

2014-04-07 3:32 PM

www.sylvania.com/zevostrip

Light is creative Transform any interior from ordinary to extraordinary Let your creativity shine. The SYLVANIA ZEVO™ LED Strip Kit comes with 16 colors, 5 modes, a 12-volt adapter and a wireless remote so you can easily create any ambience for your car’s interior.

Facebook.com/SylvaniaAutomotive Twitter.com/Sylvania Youtube.com/SylvaniaLight

14-SYLAUT-0218-Zevo-Prin-Ads-Full-Page-Rnd3.indd 1 Untitled-2 1

4/3/14 1:37 PM 2014-04-07 3:37 PM