Cable Management
Pedestrian and Traffic Mirrors
Cable Management Trip Prevention
Convex Mirrors
Pedestrian and Traffic Safety
Dome Mirrors
Security and Safety Mirrors
Security and Safety
General Safety
General Safety
PREMIER WORKPLACE SOLUTIONS www.pwsonline.co.nz T. 09 402 6750
F. 09 402 6751
1
CABLE MANAGEMENT SYSTEMS www.cablecovers.co.nz
ECONOMY CABLE PROTECTORS
DROPOVER CABLE PROTECTORS
CP2 CP2HAZ Protect important cables and leads, and help eliminate the risk of trips and falls from loose cabling with our range of cable protectors. Made from extruded durable black rubber these cable protectors are flexible and lightweight making them easy to install or remove. There are different sizes which make them ideal for applications from offices and boardrooms through to warehouses and factories. The smaller cable protectors will comfortably protect network data cables, phone and standard power cables. The larger cable protectors will fit 3-phase power cables, compressed airlines and hoses. Cables are simply inserted via slits on the underside of the protector. For added visibility we can add an anti-slip highlighting tape. Cable protectors are cut to length to suit your application. A minimum order of 2 metres applies.
CP7 These cable protectors are ideal for office and pedestrian applications, both permanent and temporary. Simply lay your cables down and drop the cable protector over the top of the cables. This system features interlocking nodules which allow you to construct the system to your required length. Their ease of use makes them ideal for temporary applications where you are likely to be moving them frequently, so ideal for board room and event applications. Available in two anti-slip styles: •
Ribbed anti-slip profile in black
•
Tread plate surface in either black or yellow.
Lengths vary according to style. A minimum order of two lengths apply.
CP5
CP4HAZ SEE OUR SELECTION GUIDE AND TECHNICAL SPECIFICATIONS OVER THE PAGE
SAFCORD ® TRIP PREVENTION SYSTEM Safcord® nylon cable covers provide a solution to securing electrical and data cables to looped carpet. This innovative hook and loop method allows you to fasten the cables in place without the use of adhesives that leave a messy residue on your carpet. The industrial grade nylon fabric is tough and stands up to almost anything. It is also washable and re-useable. The durable filament hooks hold fast, even staying in place during vacuuming. Safcord can be used on stairs or curved surfaces with ease. It works well on loop carpet, commercial grade rugs, and Berber carpet. Safcord will not work with cut pile carpet. The Safcord comes in 1.8 metre or 9 metre lengths in three colours (Grey, Blue or Yellow). It’s design allows you to cut it to any length without unraveling.
1
CABLE MANAGEMENT SYSTEMS www.cablecovers.co.nz
SELECTION GUIDE: Product Specifications:
Style No.
Power cables 1-2
CP2
Power Cables
3-4 CP3
Power Cables 4-5
CP4
Power Cables and/or Hoses 4-8
CP5
Power Cables and/or Hoses
4-5 CP6
CP7
Power Cables and/or Hoses
4-5 Power Cables
4-5 CP12
Power Cables
8-10 CP8
Power Cables
8-10 CP13
Power Cables
SAF/1.8
3
SAF/9.0
Power Cables
Applications/Cable type • Ideal for offices, boardrooms and computer rooms • Comfortably protects a network data cable, phone cable and standard power cable (one of each) • Available cut to length, minimum order 2 metres.
• Ideal for offices, boardrooms and computer rooms • Comfortably protects a network data cable, phone cable and standard power cable (multiples of each) • Available cut to length, minimum order 2 metres. • Ideal for offices, warehouses and factories • Comfortably protects multiple network data cables, phone and power cables, 3 phase cables, compressed airlines and water hoses • Available cut to length, minimum order 2 metres. • Ideal for warehouse, factory and external applications • Trafficable (light traffic only) • Comfortably fits two 3-phase power cables or two compressed airlines • Available cut to length, minimum order 2 metres.
• • • •
Suitable for warehouse, factory and external applications Ideal for protection of hoses Trafficable (light traffic only) with minimum compression Available cut to length, minimum order 2 metres.
• • • • •
Dropover cable protector with ribbed profile Ideal for office and pedestrian applications Simply drop over the top of cables Great for temporary and permanent applications Available in 1 metre inter-locking lengths, minimum order 2 lengths.
• • • • •
Dropover cable protector in black or yellow Anti-slip checker tread plate surface Simply drop over the top of cables Ideal for office and pedestrian applications Available in 1 metre inter-locking lengths, minimum order 2 lengths.
• • • • •
Dropover cable protector ribbed profile Ideal for office and pedestrian applications Simply drop over the top of cables Great for temporary and permanent applications Available in 1.2 metre inter-locking lengths, minimum order 2 lengths.
• • • • •
Dropover cable protector in black or yellow Anti-slip checker tread plate surface Office and pedestrian applications Simply dropover top of cables Available in 1 metre inter-locking lengths, minimum order 2 lengths.
• • • • •
Available in Blue, Grey or Yellow Precut in a 1.8 or 9 metre lengths Secures cables to looped carpet Industrial grade nylon fabric Can be cut to any length without unravelling.
2
CABLE MANAGEMENT SYSTEMS www.cablecovers.co.nz
TRAFFICABLE CABLE PROTECTORS
ECONOMY VEHICULAR CABLE COVER
CP10 CABLE PROTECTOR Specifications
CP10
Length
10 metre roll
Height
30mm
Width
105mm
Weight
15.5kg
No. of channels
1
Channel height
20mm
Channel width
20mm
This medium size extruded rubber cable protector is designed to aid vehicles in safely crossing cables. Simply roll out the cable protector and insert the required cables through the slit in the top. The cables are then enclosed within the protector reducing the risk of damage to the cables. Supplied in 10 metre rolls, they can easily be cut to length.
An economical cable cover for permanent and semi-permanent applications, this 300mm wide speed hump style cable cover features two cable channels. Each channel is 31mm wide by 24mm high. The 1200mm long modules feature 3 recessed fixing points and built-in reflectors for added visibility. This cable protector is suitable for light to medium vehicle applications.
CP11 CABLE PROTECTOR Specifications
CP11
Length
4 metre roll
Height
53mm
Width
170mm
Weight
17.3kg
No. of channels
1
Channel height
38mm
Channel width
38mm
Part No.
Style
CPT1200
Cable protector/speed hump, 1200mm long
LEAD HOOKS
This large size extruded rubber cable protector is designed to aid vehicles in safely crossing cables. Simply roll out the cable protector and insert the required cables through the slit in the top. The cables are then enclosed within the protector reducing the risk of damage to the cables. Supplied in 4 metre rolls, they can easily be cut to length. These lead hooks are ideal for keeping cables, leads and hoses off the ground, assisting in Occupational Health and Safety compliance. They are manufactured from a non-conductive, highly visible and durable plastic material. The two larger hooks will accommodate cables and hoses up to 20mm in diameter, whilst the smaller ‘clip style’ hooks are ideal for standard power cables. Part No.
Style
Part No.
Style
CP10
105mm Wide, 30mm High, 20mm Diameter channel, 10 metre roll
CPLHK
Plastic lead hooks, available individually or in packs, see website for
CP11
170mm Wide, 53mm High, 38mm Diameter channel, 4 metre roll
3
details.
CABLE MANAGEMENT SYSTEMS www.cablecovers.co.nz
2 CHANNEL CABLE & HOSE PROTECTOR
3 CHANNEL CABLE & HOSE PROTECTOR
This 2 channel cable protector is designed to protect cables and hoses from vehicle damage and provide safe passage for vehicles across potentially hazardous cables.
Occasionally you just can’t avoid running cables or hoses across the floor. To help with these applications we offer a 3 channel cable and hose protector designed to protect valuable cables and hoses from vehicle damage and provide safe passage for pedestrians and vehicles across your cables and hoses.
These are ideal for temporary and permanent applications. Our cable protectors are non-conductive, plastic and polyurethane construction making them suitable for high volume pedestrian and low to medium volume, light to medium weight vehicle applications. The modular, interlocking design allows you to construct a cable protection system to suit your needs. Each module features four fixing points to help secure the cable protector in more permanent applications. • Suitable for indoor or outdoor use • Checker plate pattern for increased traction • Easy to interlock with highly visible colour • Non-conductive construction • Hinged plastic lid for easy access to cables • Fixing holes for more permanent applications.
Specifications Length
1000mm
Height
45mm
Width
250mm
Weight
7.5kg
No. of channels
2
Channel height
30mm
Channel width
30mm
Part No.
Style
CP2CH
Two Channel cable and hose protector
CP2CH/LT
45° left turn module
CP2CH/RT
45° right turn module
It’s non-conductive, rubber and polyurethane construction makes it suitable for high volume pedestrian and low to medium volume, light to medium weight vehicle applications. Its modular, interlocking design allows you to construct cable protection systems to suit your needs. Each module features four fixing points to help secure the cable cover in more permanent applications. This system features left and right 45 degree turning sections and end caps. • Large channels to suit a variety of cable and hose sizes • Suitable for indoor or outdoor use • Checker plate pattern for increased traction • Easy to interlock with highly visible colour • Non-conductive construction • Hinged lid for easy access to cables • Fixing holes for more permanent applications. Specifications Length
900mm
Height
75mm
Width
600mm
Weight
20kg
No. of channels
3
Channel height
55mm
Channel width
60mm
Part No.
Style
CP3CH
Cablesafe cable protector body
CP3CH/LT
45° left turn module
CP3CH/RT
45° right turn module
CP3CH/EC
End caps (pair)
4
CABLE MANAGEMENT SYSTEMS www.cablecovers.co.nz
5 CHANNEL CABLE PROTECTOR
5 CHANNEL ECONOMY PROTECTOR
This 5 channel cable and hose protector is ideal for when you need to run a number of cables and hoses across the floor. This cable protector will protect your valuable cables from both pedestrian and vehicle traffic. It also provides safe passage for pedestrians and vehicles across potentially hazardous cables.
These moulded rubber cable covers are an excellent economical counterpart to their polyurethane cousins. They are suitable for pedestrian traffic and occasional light vehicles (we would not recommend them for heavy vehicles or frequent traffic applications). The system features a ‘snap-lock’ hinged lid to keep those cables and hoses secure, a unique interlocking mechanism, and end pieces for a smooth transition.
It’s non-conductive, rubber and polyurethane construction makes it suitable for high volume pedestrian and low to medium volume, light to medium weight vehicle applications. Its modular, interlocking design allows you to construct cable protection systems to suit your needs. Each module features four fixing points to help secure the cable cover in more permanent applications. The system features left and right 45 degree turning sections and end caps.
• Highly visible colour • Non-conductive construction • Hinged lid for easy access to cables • Fixing holes for more permanent applications.
• Checker plate pattern for increased traction - easy to interlock Specifications • Highly visible colour • Non-conductive construction • Hinged lid for easy access to cables • Fixing holes for more permanent applications.
L
Length
900mm
Height
75mm
Width
590mm
Weight
16kg
No. of channels
5
Channel height
50mm
Channel width
35mm
910mm
Height
50mm
Width
500mm
Weight
17.5kg
No. of channels
5
Channel height
31mm
Channel width
35mm
R
Part No.
Style
CPPL5CH
5 Channel cable protector - standard plastic lid
CPPL5CH/LT
45 Degree Left Turn
CPPL5CH/RT
45 Degree Right Turn
CPPL5CH/EC
End caps (pair)
5
Specifications Length
Part No.
Style
CP5CH
5 channel cable protector with pair connectors - rubber lid
CP5CH/EC
End caps (pair) with connectors, 30cm long each
CP5CH/TH
Extra connectors (pair)
FAX ORDER FORM Fax: 09 402 6751
Invoice to
Deliver to
Company:
Company:
Address:
Address:
Suburb:
Suburb:
City/Town:
Post Code:
City/Town:
Name:
Name:
Position:
Position:
Phone:
Fax:
Post Code:
Phone:
Email:
Fax:
q Please deliver by PWS courier - charges apply q Please use our courier:
Purchase Order No: Signature:
Account No:
Date:
Purchase order number will be displayed on all delivery dockets where quoted.
Please supply Code Number Description
Colour
Quantity
Unit Value
Extended Value
Freight Charge Total Value
Easy payment q Please bill our existing account (Net 20 days) q Electronic funds transfer (EFT) - please advise details q Cheque (cleared funds) made payable to Premier Workplace Solutions posted to PO Box 51, Paihia 0247, Bay of Islands q Please charge my credit card:
q Visa
q Mastercard
Card No.___________________________________________________________ Expiry Date:__________________________ Name on Card:__________________________________________________________________________________________ Card Holder’s Signature:___________________________________________________________________________________ 10
CABLE MANAGEMENT www.cablecovers.co.nz
CONVEX MIRRORS/DOME MIRRORS www.convexmirrors.co.nz
FULL PRODUCT RANGE www.pwsonline.co.nz
RESELLER ENQUIRIES WELCOME
For a full catalogue and price list contact: E. sales@pwsonline.co.nz T. 09 402 6750 F. 09 402 6751 PO Box 51, Paihia 0247 Š Premier Workplace Solutions Limited. The contents of this catalogue are protected by copyright. No part of this catalogue may be reproduced without prior permission from the owner. We reserve the right to alter specifications to products without prior notice.