Cable Management
Pedestrian and Traffic Mirrors
Cable Management Trip Prevention
Convex Mirrors
Pedestrian and Traffic Safety
Dome Mirrors
Security and Safety Mirrors
Security and Safety
General Safety
General Safety
PREMIER WORKPLACE SOLUTIONS www.pwsonline.co.nz T. 09 402 6750
F. 09 402 6751
1
CABLE MANAGEMENT SYSTEMS www.cablecovers.co.nz
ECONOMY CABLE PROTECTORS
DROPOVER CABLE PROTECTORS
CP2 CP2HAZ Protect important cables and leads, and help eliminate the risk of trips and falls from loose cabling with our range of cable protectors. Made from extruded durable black rubber these cable protectors are flexible and lightweight making them easy to install or remove. There are different sizes which make them ideal for applications from offices and boardrooms through to warehouses and factories. The smaller cable protectors will comfortably protect network data cables, phone and standard power cables. The larger cable protectors will fit 3-phase power cables, compressed airlines and hoses. Cables are simply inserted via slits on the underside of the protector. For added visibility we can add an anti-slip highlighting tape. Cable protectors are cut to length to suit your application. A minimum order of 2 metres applies.
CP7 These cable protectors are ideal for office and pedestrian applications, both permanent and temporary. Simply lay your cables down and drop the cable protector over the top of the cables. This system features interlocking nodules which allow you to construct the system to your required length. Their ease of use makes them ideal for temporary applications where you are likely to be moving them frequently, so ideal for board room and event applications. Available in two anti-slip styles: •
Ribbed anti-slip profile in black
•
Tread plate surface in either black or yellow.
Lengths vary according to style. A minimum order of two lengths apply.
CP5
CP4HAZ SEE OUR SELECTION GUIDE AND TECHNICAL SPECIFICATIONS OVER THE PAGE
SAFCORD ® TRIP PREVENTION SYSTEM Safcord® nylon cable covers provide a solution to securing electrical and data cables to looped carpet. This innovative hook and loop method allows you to fasten the cables in place without the use of adhesives that leave a messy residue on your carpet. The industrial grade nylon fabric is tough and stands up to almost anything. It is also washable and re-useable. The durable filament hooks hold fast, even staying in place during vacuuming. Safcord can be used on stairs or curved surfaces with ease. It works well on loop carpet, commercial grade rugs, and Berber carpet. Safcord will not work with cut pile carpet. The Safcord comes in 1.8 metre or 9 metre lengths in three colours (Grey, Blue or Yellow). It’s design allows you to cut it to any length without unraveling.
1
CABLE MANAGEMENT SYSTEMS www.cablecovers.co.nz
SELECTION GUIDE: Product Specifications:
Style No.
Power cables 1-2
CP2
Power Cables
3-4 CP3
Power Cables 4-5
CP4
Power Cables and/or Hoses 4-8
CP5
Power Cables and/or Hoses
4-5 CP6
CP7
Power Cables and/or Hoses
4-5 Power Cables
4-5 CP12
Power Cables
8-10 CP8
Power Cables
8-10 CP13
Power Cables
SAF/1.8
3
SAF/9.0
Power Cables
Applications/Cable type • Ideal for offices, boardrooms and computer rooms • Comfortably protects a network data cable, phone cable and standard power cable (one of each) • Available cut to length, minimum order 2 metres.
• Ideal for offices, boardrooms and computer rooms • Comfortably protects a network data cable, phone cable and standard power cable (multiples of each) • Available cut to length, minimum order 2 metres. • Ideal for offices, warehouses and factories • Comfortably protects multiple network data cables, phone and power cables, 3 phase cables, compressed airlines and water hoses • Available cut to length, minimum order 2 metres. • Ideal for warehouse, factory and external applications • Trafficable (light traffic only) • Comfortably fits two 3-phase power cables or two compressed airlines • Available cut to length, minimum order 2 metres.
• • • •
Suitable for warehouse, factory and external applications Ideal for protection of hoses Trafficable (light traffic only) with minimum compression Available cut to length, minimum order 2 metres.
• • • • •
Dropover cable protector with ribbed profile Ideal for office and pedestrian applications Simply drop over the top of cables Great for temporary and permanent applications Available in 1 metre inter-locking lengths, minimum order 2 lengths.
• • • • •
Dropover cable protector in black or yellow Anti-slip checker tread plate surface Simply drop over the top of cables Ideal for office and pedestrian applications Available in 1 metre inter-locking lengths, minimum order 2 lengths.
• • • • •
Dropover cable protector ribbed profile Ideal for office and pedestrian applications Simply drop over the top of cables Great for temporary and permanent applications Available in 1.2 metre inter-locking lengths, minimum order 2 lengths.
• • • • •
Dropover cable protector in black or yellow Anti-slip checker tread plate surface Office and pedestrian applications Simply dropover top of cables Available in 1 metre inter-locking lengths, minimum order 2 lengths.
• • • • •
Available in Blue, Grey or Yellow Precut in a 1.8 or 9 metre lengths Secures cables to looped carpet Industrial grade nylon fabric Can be cut to any length without unravelling.
2
CABLE MANAGEMENT SYSTEMS www.cablecovers.co.nz
TRAFFICABLE CABLE PROTECTORS
ECONOMY VEHICULAR CABLE COVER
CP10 CABLE PROTECTOR Specifications
CP10
Length
10 metre roll
Height
30mm
Width
105mm
Weight
15.5kg
No. of channels
1
Channel height
20mm
Channel width
20mm
This medium size extruded rubber cable protector is designed to aid vehicles in safely crossing cables. Simply roll out the cable protector and insert the required cables through the slit in the top. The cables are then enclosed within the protector reducing the risk of damage to the cables. Supplied in 10 metre rolls, they can easily be cut to length.
An economical cable cover for permanent and semi-permanent applications, this 300mm wide speed hump style cable cover features two cable channels. Each channel is 31mm wide by 24mm high. The 1200mm long modules feature 3 recessed fixing points and built-in reflectors for added visibility. This cable protector is suitable for light to medium vehicle applications.
CP11 CABLE PROTECTOR Specifications
CP11
Length
4 metre roll
Height
53mm
Width
170mm
Weight
17.3kg
No. of channels
1
Channel height
38mm
Channel width
38mm
Part No.
Style
CPT1200
Cable protector/speed hump, 1200mm long
LEAD HOOKS
This large size extruded rubber cable protector is designed to aid vehicles in safely crossing cables. Simply roll out the cable protector and insert the required cables through the slit in the top. The cables are then enclosed within the protector reducing the risk of damage to the cables. Supplied in 4 metre rolls, they can easily be cut to length. These lead hooks are ideal for keeping cables, leads and hoses off the ground, assisting in Occupational Health and Safety compliance. They are manufactured from a non-conductive, highly visible and durable plastic material. The two larger hooks will accommodate cables and hoses up to 20mm in diameter, whilst the smaller ‘clip style’ hooks are ideal for standard power cables. Part No.
Style
Part No.
Style
CP10
105mm Wide, 30mm High, 20mm Diameter channel, 10 metre roll
CPLHK
Plastic lead hooks, available individually or in packs, see website for
CP11
170mm Wide, 53mm High, 38mm Diameter channel, 4 metre roll
3
details.
CABLE MANAGEMENT SYSTEMS www.cablecovers.co.nz
2 CHANNEL CABLE & HOSE PROTECTOR
3 CHANNEL CABLE & HOSE PROTECTOR
This 2 channel cable protector is designed to protect cables and hoses from vehicle damage and provide safe passage for vehicles across potentially hazardous cables.
Occasionally you just can’t avoid running cables or hoses across the floor. To help with these applications we offer a 3 channel cable and hose protector designed to protect valuable cables and hoses from vehicle damage and provide safe passage for pedestrians and vehicles across your cables and hoses.
These are ideal for temporary and permanent applications. Our cable protectors are non-conductive, plastic and polyurethane construction making them suitable for high volume pedestrian and low to medium volume, light to medium weight vehicle applications. The modular, interlocking design allows you to construct a cable protection system to suit your needs. Each module features four fixing points to help secure the cable protector in more permanent applications. • Suitable for indoor or outdoor use • Checker plate pattern for increased traction • Easy to interlock with highly visible colour • Non-conductive construction • Hinged plastic lid for easy access to cables • Fixing holes for more permanent applications.
Specifications Length
1000mm
Height
45mm
Width
250mm
Weight
7.5kg
No. of channels
2
Channel height
30mm
Channel width
30mm
Part No.
Style
CP2CH
Two Channel cable and hose protector
CP2CH/LT
45° left turn module
CP2CH/RT
45° right turn module
It’s non-conductive, rubber and polyurethane construction makes it suitable for high volume pedestrian and low to medium volume, light to medium weight vehicle applications. Its modular, interlocking design allows you to construct cable protection systems to suit your needs. Each module features four fixing points to help secure the cable cover in more permanent applications. This system features left and right 45 degree turning sections and end caps. • Large channels to suit a variety of cable and hose sizes • Suitable for indoor or outdoor use • Checker plate pattern for increased traction • Easy to interlock with highly visible colour • Non-conductive construction • Hinged lid for easy access to cables • Fixing holes for more permanent applications. Specifications Length
900mm
Height
75mm
Width
600mm
Weight
20kg
No. of channels
3
Channel height
55mm
Channel width
60mm
Part No.
Style
CP3CH
Cablesafe cable protector body
CP3CH/LT
45° left turn module
CP3CH/RT
45° right turn module
CP3CH/EC
End caps (pair)
4
CABLE MANAGEMENT SYSTEMS www.cablecovers.co.nz
5 CHANNEL CABLE PROTECTOR
5 CHANNEL ECONOMY PROTECTOR
This 5 channel cable and hose protector is ideal for when you need to run a number of cables and hoses across the floor. This cable protector will protect your valuable cables from both pedestrian and vehicle traffic. It also provides safe passage for pedestrians and vehicles across potentially hazardous cables.
These moulded rubber cable covers are an excellent economical counterpart to their polyurethane cousins. They are suitable for pedestrian traffic and occasional light vehicles (we would not recommend them for heavy vehicles or frequent traffic applications). The system features a ‘snap-lock’ hinged lid to keep those cables and hoses secure, a unique interlocking mechanism, and end pieces for a smooth transition.
It’s non-conductive, rubber and polyurethane construction makes it suitable for high volume pedestrian and low to medium volume, light to medium weight vehicle applications. Its modular, interlocking design allows you to construct cable protection systems to suit your needs. Each module features four fixing points to help secure the cable cover in more permanent applications. The system features left and right 45 degree turning sections and end caps.
• Highly visible colour • Non-conductive construction • Hinged lid for easy access to cables • Fixing holes for more permanent applications.
• Checker plate pattern for increased traction - easy to interlock Specifications • Highly visible colour • Non-conductive construction • Hinged lid for easy access to cables • Fixing holes for more permanent applications.
L
Length
900mm
Height
75mm
Width
590mm
Weight
16kg
No. of channels
5
Channel height
50mm
Channel width
35mm
910mm
Height
50mm
Width
500mm
Weight
17.5kg
No. of channels
5
Channel height
31mm
Channel width
35mm
R
Part No.
Style
CPPL5CH
5 Channel cable protector - standard plastic lid
CPPL5CH/LT
45 Degree Left Turn
CPPL5CH/RT
45 Degree Right Turn
CPPL5CH/EC
End caps (pair)
5
Specifications Length
Part No.
Style
CP5CH
5 channel cable protector with pair connectors - rubber lid
CP5CH/EC
End caps (pair) with connectors, 30cm long each
CP5CH/TH
Extra connectors (pair)
SAFETY AND SECURITY MIRRORS www.convexmirrors.co.nz
MIRROR SELECTION GUIDE:
INTERNAL SAFETY MIRRORS - STANDARD Safety Mirrors: An ideal solution for blind spots in offices and factories. Protect pedestrians and vehicles alike whilst going round sharp corners.
Security Mirrors: Theft of stock is an unwelcome threat, so give thieves another deterrent with increased surveillance.
Selecting the right size of mirror is important. The tables below gives a good indication to the viewing distances each mirror is suited for. Work out your combined viewing distance and match this distance with the chart to obtain the right size mirror for your application. If in doubt, always choose the larger size mirror. Stainless steel convex mirrors are heavy duty providing a higher resolution image than the acrylic mirrors, thus producing longer viewing distances. Acrylic Convex Mirrors: Combined viewing distance*
Mirror Diameter
Up to 8 metres
300mm
Up to 12 metres
450mm
Up to 20 metres
600mm
Up to 30 metres
800mm
Up to 40 metres
1000mm
Stainless Steel Convex Mirrors: Combined viewing distance*
Mirror Diameter
Up to 25 metres
600mm
Up to 35 metres
800mm
Up to 45 metres
1000mm
*Viewing distances are subjective and most mirrors will give satisfactory viewing range beyond
Designed to help monitor those products that may normally be obstructed from view.
These are a general purpose, light industrial convex mirror suitable for all indoor office/retail/factory and undercover applications. This robust, durable acrylic mirror is complete with galvanised colourbond steel backing and fully adjustable metal arm. Wall mounting bracket included. • Crystal clear images • Reliable mounting brackets • Inexpensive security • Long life, impact resistant acrylic faces • Easy to install - simple instructions supplied • Easy adjustment to suit your viewing needs • No maintenance required
those shown. If in doubt, always choose the larger size convex mirror.
Acrylic or stainless steel?
All internal convex mirrors are supplied with wall mount brackets as standard.
For many standard applications the general purpose, acrylic convex mirror is suitable for a number of situations. The stainless steel convex mirrors are heavy duty with longer viewing distances. They are ideal for areas of extreme weather conditions, food processing plants and mining environments. As these mirrors are virtually unbreakable, they are also suitable for areas prone to high vandalism.
Our larger mirrors have an additional extending arm to give additional strength and flexibility.
Internal or external convex mirror? Both our internal and external safety mirrors are weatherproof. However, the external convex mirrors feature stronger brackets capable of tolerating windy conditions and a visor to minimize sun glare. If you require assistance on selecting the right convex mirror, please contact us on 09 402 6750 or email sales@pwsonline.co.nz
Part No.
Diameter
Included bracket
Viewing distance*
Internal grade acrylic MIR300INT
300mm
Wall mount
0 - 8 metres
MIR450INT
450mm
Wall mount
0-12 metres
MIR600INT
600mm
Wall mount
0-20 metres
MIR800INT
800mm
Wall mount
0-30 metres
6
SAFETY AND SECURITY MIRRORS www.convexmirrors.co.nz
EXTERNAL SAFETY MIRRORS - STANDARD
EXTERNAL SAFETY MIRRORS - HEAVY DUTY
Blind corners are a common problem around car parks, factories and offices. Our external convex mirrors will warn oncoming traffic of your presence allowing both parties to take defensive action before an accident occurs.
Crystal clear image - Tough - Durable
An industrial quality, acrylic convex safety mirror with a highly visible, weatherproof fibre-glass backing that caters for indoor and outdoor applications. They make an ideal Traffic Mirror and blind spot mirror. The mirror incorporates heavy duty steel mounting brackets capable of tolerating windy conditions and visors to minimize sun glare. For more specialist applications we also provide Stainless Steel Mirror and Wide Angle Mirrors. • Crystal clear images • Stand up to New Zealand weather conditions • Wide range of viewing distances • Reliable mounting brackets • Inexpensive security • Long life, impact resistant acrylic faces • Easy to install • Easy adjustment to suit your viewing needs • No maintenance required
•
High resolution image
•
Heavy duty with longer viewing distances
•
Virtually unbreakable
•
Features a visor to minimise sun glare.
MIR600SS
Included bracket
Viewing distance 0-12 metres
External grade
Included bracket
Viewing distance
600mm
Post (76mm OD)
25 metres plus
WALL MOUNT ADAPTER BRACKET A post to wall adapter bracket used for mounting the following mirrors (that are supplied with a post mounting bracket as standard) onto a concrete or brick wall: • MIR800EXT • MIR1000EXT • MIR600SS
MIR450EXT
450mm
Wall mount and 60mm OD post
MIR600EXT
600mm
Wall mount and 60mm OD post
0-20 metres
Part No.
MIR800EXT
800mm
Post (76mm OD)
0-30 metres
Adapters
MIR1000EXT
1000mm
Post (76mm OD)
0-40 metres
MIRBRAC01
7
Diameter
Heavy duty stainless steel
Depending on the mirror size they come with wall mounting brackets and/ or post mounting brackets. Diameter
The stainless steel face on this convex mirror is virtually unbreakable. Each mirror features a heavy duty steel mounting bracket suitable for 76mm posts.
Part No.
All external convex mirrors are supplied with brackets as standard.
Part No.
Stainless steel mirrors are heavy duty. They provide a higher resolution image producing longer viewing distances. They are suitable for a number of applications including use in food processing plants, mining environments and areas prone to high vandalism.
Included bracket 76mm post to wall adapter bracket
SAFETY AND SECURITY MIRRORS www.convexmirrors.co.nz
WIDE ANGLE CONVEX MIRRORS
DOME MIRRORS
Our acrylic wide angle mirror gives crystal clear viewing across a wide field of view. These convex mirrors are industrial quality and incorporate a heavy duty steel mounting bracket for windy conditions. These make ideal safety mirrors.
Our range of dome mirrors make ideal security mirrors and safety mirrors, protecting people against accidents in offices, warehouses and public areas.
The acrylic model is 900mm wide by 600mm high. The mounting brackets are for a 76mm outside diameter post, and an adapter bracket for attaching to walls. Part No.
Diameter
Included bracket
Viewing distance*
Acrylic Wide angle rectangular MIR9060
90cm x 60cm
Post (76mm OD) and wall adapter
They are also a valuable security device in retail and commercial applications and can help prevent theft in shops, malls and public areas. Half dome and quarter dome mirrors are ideal for applications where space is confined and the use of a convex mirror would be unsuitable.
0-40 metres
Full Dome Mirrors:
DOME MIRROR SELECTION GUIDE:
Full dome mirrors are useful for four way intersections where viewing is required from a variety of approaches.
Half Dome Mirrors:
360째 View
Half dome mirrors provide views in two directions and are therefore ideal for Tintersections.
Ideal for 4 way intersections or retail premises
Quarter Dome Mirrors: Quarter dome mirrors require less space than a standard convex mirror and are therefore useful for blind spots around corners.
180째 View Ideal for 3 way intersections or retail premises
Part No.
90째 View Ideal for corners and hallways
Diameter
Full Dome Mirror
Part No.
Diameter
Half Dome Mirror
MIR450FD
450mm
MIR450HD
450mm
MIR650FD
650mm
MIR650HD
650mm
Part No.
Diameter
Quarter Dome Mirror MIR450QD
450mm
8
GENERAL SAFETY www.pwsonline.co.nz
PORTABLE SPEED HUMPS
ECONOGUARD BARRIER
At last, we can offer a truly portable and effective speed control hump. The highly visible system is designed for temporary speed control applications, where it is desired to slow traffic speeds to below 40km/h. The secret behind the success of the system is it’s unique ‘waffle-style’ rubber underlay, which maximises adhesion to the road surface as vehicles traverse.
The Econoguard portable barrier is an economical alternative to its heavier duty counterparts. This free standing, expandable barrier is simple to use and ideal for internal applications eg warehouses. This highly visible, scissor-action barrier expands from 215mm in the compact position to 3 metres when fully extended. The 440mm wide feet provide a sturdy base, and the barrier weighs in at just 6.5kg to make it easily portable.
It allows the user to simply lay the system in position (with recommended traffic control accessories such as cones and signs) and walk away. There is no fixing, no drilling, no mess and no fuss. When the job is finished, simply roll the unit up and slide it into its carry bag. • Portable • Instant • Effective • Highly visible • Easy to use • No fixings
• Holds to road • Easily relocated • Set and forget
An economical sign adapter kit is available that allows your message to be secured via a wingnut to the barrier, on both sides if needed (drill required to install). • Expands to cordon off hazards • Handy locking bar • Ideal for warehouse applications • Free standing • Portable • Versatile • Highly visible Part No.
Style
BREG3
Econoguard barrier
BREG/SA
Sign adapter kit
Specifications:
Model No.
PSH3
PS6
Height
45mm
45mm
Width
300mm
300mm
Diameter (rolled up)
54cm
69cm
Length (in use)
3.05m
6.10m
Weight
13.6kg
27.2kg
9
Material
Steel
Height
101cm barrier height
Finish
Powdercoated red and white
Length
215mm closed - 3 metres open
Weight
6.5kg
FAX ORDER FORM Fax: 09 402 6751
Invoice to
Deliver to
Company:
Company:
Address:
Address:
Suburb:
Suburb:
City/Town:
Post Code:
City/Town:
Name:
Name:
Position:
Position:
Phone:
Fax:
Post Code:
Phone:
Email:
Fax:
q Please deliver by PWS courier - charges apply q Please use our courier:
Purchase Order No: Signature:
Account No:
Date:
Purchase order number will be displayed on all delivery dockets where quoted.
Please supply Code Number Description
Colour
Quantity
Unit Value
Extended Value
Freight Charge Total Value
Easy payment q Please bill our existing account (Net 20 days) q Electronic funds transfer (EFT) - please advise details q Cheque (cleared funds) made payable to Premier Workplace Solutions posted to PO Box 51, Paihia 0247, Bay of Islands q Please charge my credit card:
q Visa
q Mastercard
Card No.___________________________________________________________ Expiry Date:__________________________ Name on Card:__________________________________________________________________________________________ Card Holder’s Signature:___________________________________________________________________________________ 10
CABLE MANAGEMENT www.cablecovers.co.nz
CONVEX MIRRORS/DOME MIRRORS www.convexmirrors.co.nz
FULL PRODUCT RANGE www.pwsonline.co.nz
RESELLER ENQUIRIES WELCOME
For a full catalogue and price list contact: E. sales@pwsonline.co.nz T. 09 402 6750 F. 09 402 6751 PO Box 51, Paihia 0247 Š Premier Workplace Solutions Limited. The contents of this catalogue are protected by copyright. No part of this catalogue may be reproduced without prior permission from the owner. We reserve the right to alter specifications to products without prior notice.