PREPARE Magazine

PREPARE Encouraging, Empowering and Enriching Your Journey

July 2012

capturing water

with

a

PLASTIC SHEET

Review

WELL : Dig Your Own

supplementing with

Rainwater

Contents Filteration System

2

Rainwater

4

Capturing Water

5

Dig Your Own Well

7

Systems and Tanks

10

Tips to Water Storage 12 Review

12

Natural Springs

14

Water Sources

16

The Water of Life

21

Age Appropriate Family

Preparedness Age appropriate family preparedness is often a topic left off the table due to the wide variety of family approaches to preparedness planning. However, we have seen some key elements that need addressing when discussing this wide and varied topic. At what age is it reasonable to begin teaching our children about preparedness planning? Do we deny them a ‘normal’ childhood by drills, gas masks and fear? Do we allow them to live in oblivion thinking life as they know it will always be lollipops and fluffy clouds?

Parenting is difficult enough as it is in our current time, but throw in the “prepping” mind-set, some young children, a tight budget and the signs of the times ahead and a family could be headed for a disaster greater than the collapse of our economy. That disaster would be: resentful children, bitter parents and a disassembled or at least disconnected family unit.

At this point we will refrain from giving a LIST of things to do or accumulate for Family Preparedness, although that is often what people are looking for to prepare their fam-

ilies for emergencies. For now, we will focus on just a few of the intangibles that prepare your family.

Parental Attitude must be Peaceful and not anxious. Kids (from infant to teen) are thermometers. If you are prepping in a fearful or dogmatic fashion, they will react based on that attitude. Either they will become overly anxious and easily triggered to react poorly or they will simply rebel. After all aren’t we, as parents, supposed to protect them?

How much faith do they have in us if we act like people possessed by fear and anxiety?

Include, educate and involve kids.

Explaining why you prepare and want them to be a part of it is more bonding than showing them all you’ve done for them (and expecting the accolades for it). Make it a fun, Family affair to learn new skills or build bug-out bags. Keep fear at bay by your attitude and enjoyment of doing this. Isn’t it a joy to provide for and protect your family?

Yes. Show that.

Respect each teen and adult family member’s right to opt out. As painful and worrisome as it may be,

by Donna Miller forcing someone to ‘buy into prepping’ is usually the most counterproductive thing we can do. If you’ve fostered the other two above traits and a loved one decides not to live as you do, relax. By shear raising, when the time comes – he or she will know what to do or at least they will feel welcome enough of where to come (to you) in an emergency.

By then, they will have understood the need and will be willing to contribute.

If you shove Preparedness in the face of loved ones, if you Prepare out of fear like a control freak or if you become the martyr of your Family’s Preparedness Plan (you know, the mentality that “you have to do everything”) then your family is more likely to suffer a casualty of dismemberment than if you foster the ideals listed above. That casualty is likely to occur far sooner than an event of cataclysmic proportion that proves you need to have been prepared. You’ll want and need your Family Unit in that kind of situation. Lay the groundwork NOW to keep that most precious, irreplaceable commodity.

1

Cheap Water Filtration System One of the most important preparedness areas we must consider is water quality and purification. We simply cannot survive without fresh clean water. And if we aren’t careful, contaminated water can create all sorts of health issues.

Proper filtering must become an essential part of our preparation planning.

Unfortunately, many people seem to take water for granted or are not as concerned with their water quality as they need to be. Since many municipalities have been providing water services to their citizens for a long time, we’ve become somewhat accustomed to having our water on demand. So, it is understandable why some people have become complacent and presumptuous about their water needs.

Of course, there are multiple issues with depending on our current water provisions. In addition to the concerns of water disruption, what happens if the local reservoir is contami2

nated? Even during times of natural disasters such as hurricanes, earthquakes and flooding, water quality can be compromised. There is a reason why during some emergency events government officials will call for the boiling of water. The water has become too dangerous to consume due to contaminants.

It goes without saying that we must be mindful to have a back-up water source. Beyond

that, it is also vital that we have a solid solution for water filtration and purification. In looking for a Water Filter System as part of your preparation efforts, there are some important things for you to consider.

You may be tempted buy the lower priced water filter system that retails for around $50, since that sounds like a reasonable price alternative for a family on a limited budget.

But there are several prob-

lems with filters at that low of a price scale. Most are really only chlorine filters and not actual purifiers. Although chlorine removal is fine, that in and of itself is not enough anymore. Water contaminants including hormones, drugs, herbicides, pesticides, benzene and gasoline additives are present in groundwater and come through the tap straight into your sink - and ultimately into your body.

Among water filters, reverse osmosis is the most expensive choice for home use. RO filters are used in large industrial applications as well as in public facilities. In certain home applications, reverse osmosis filters are the right choice, but for the most part the price and lack of filtration of certain contaminants means you are better off choosing another filtration method. The best application for RO systems is desalination, which is the process of removing salt from water.

The more reasonably priced reverse osmosis systems top out

in price at around $450. They generally include some form of micron filter combined with carbon filtration, RO and some sort of filter to balance pH levels and mineral content. You can get other water filter system devices that are the same quality or better than reverse osmosis for less than $150.

The big difference is the markup by certain reverse osmosis distributors.

Many harmful contaminants, such as trihalomethanes and volatile organic chemicals, which have also been linked to cancer, are not blocked by the cheaper models. In some cases, lead, which is toxic, is not even removed. Lead contamination is a big problem for many cities, not because the city water treatment facility isn’t doing the job, but because the pipes that run into homes are old and contaminated.

Bacterial cysts are

another type of contaminant that a cheaper drinking water filtration system typically cannot remove. They cause parasitic infections in the gastrointestinal tract and have been known to cause serious health problems and even death in the elderly, children and people with compromised immune systems.

If those reasons are not enough to invest a little extra cash into a water filter system, then here’s another fact: cheap water filters cost more to use in the long run. They use, on average, more than 25 cents per day, as opposed to the 10 cents per day that more expensive filters use. The companies draw you in by charging a lower price up front, but then charge more for replacement filter cartridges that need to be replaced at a higher rate. They also manufacture the cartridge to have a very short lifespan.

Either way you look at it, you end up spending more when you purchase a cheap filter system.

3

Supplement Your Water Supply with

R a i n wat e r People have been collecting and storing rainwater for thousands of years. Clay pots have been discovered that are over 2,000 years old with evidence showing that the pots were used to collect and store rain runoff. People used this water for drinking and irrigation.

Today there are many techniques for collecting rainwater. One of the easiest ways today is by using your home’s guttering system. Many homes have downspouts that channel the runoff from roofs away from the home’s foundation. By using these downspouts properly, you can collect rainwater very easily into a rain barrel.

To use a rain barrel and to prevent it from overflowing and causing water damage near your foundation, you can use a rain barrel diverter.

The diverter is simply a “Y” shaped spout that connects to your existing downspout. One section diverts water into the barrel while the other continues its normal path of channeling the water from the home’s foundation. You will have to cut a section from the spout to ensure the diverter is high enough to flow into the barrel. Use the cut section to connect to the other diverter end.

Once the rain barrel is full, a flapper

4

valve closes from the rising water and then diverts all the water to the other spout to channel all the water away. The barrel is then full but will not over flow. You can purchase a barrel with a hose spigot near the bottom to water flowerbeds and gardens. Simply connect a garden hose to the spigot when ready to water.

Gravity will force the water out.

In emergencies, the water can be purified and consumed. Protect the water from squirrels, birds and insects by putting a screen over the top, or adapt a cover to fit by cutting a hole for the diverter spout. Barrels can be purchased in virtually any size and you can even use two barrel by adding additional diverters.

Rainwater is soft and is excellent for bathing. There is no reason why you cannot put a galvanized tub nearby and fill it with soft rainwater for bathing in warm weather. You can even build an outdoor shower by attaching a showerhead to a shower bladder. The bladders are black to absorb heat to help warm the water for showers. Simply fill the bladder from the rain barrel and allow it to warm.

A barrel under a guttering spout is the easiest way to collect rainwater.

However, there are other methods

by: Trent Powers

as well. Keep in mind when collecting rainwater to drink that you must let it rain for at least 20 minutes before drinking any collected water. This clears the air of pollutants, such as pollen and acids in the air. For emergency collection, turn an open umbrella upside down. The water will collect quickly, and in most cases, you can drink the water if you are sure the umbrella is not contaminated. Water that runs off streets, roofs, or any structure must be purified before it is safe to drink.

You can also collect rainwater with a small sheet of plastic and a small depression in the ground. Scoop out a shallow depression and lay the plastic over the hole. Secure the plastic around the edges using some rocks or other heavy objects. Do not use any objects that can contaminate the water. Place a rock in the middle of the plastic to create a shallow depression, this provides a place for the water to collect. Let it fill up once then empty before drinking the water. During heavy rains, water can be collected by simply setting a bucket in the rain. It will not collect much but should be enough for hydration.

Capturing Water With A Plastic Sheet

by Ken Youngquist

In a previous blog “Milking A Tree For Water” I wrote about the phenomena of transpiration and how to collect water by covering the end of a leafy branch with a plastic bag. This article explains a different approach using the same principal but by covering grass with a sheet of plastic.

I decided to simulate an emergency scenario to improve a condensation surface by cutting open a 16 gallon sized plastic bag which spread out as a sheet measuring 2.5 feet by 4 feet. Because of its thin material and flimsy nature, the slightest breeze could blow it away so I attempted to weigh the bag down with small stones at the four corners. However, it still fluttered with the breeze. Since any fluttering could spill collected condensation back into the grass, I placed more stones around the edge until it was still. The key point here is to make sure your plastic sheet will remain still throughout the entire collecting process.

I left this moisture collector alone for about a half hour then returned to find it holding a “beady” fog on the bottom surface. The first step in collecting this moisture was to protect it from touching the grass so I removed most of the stones keeping one at the corner. I pulled that corner of the sheet up and back until the entire sheet was completely inverted and lying flat on the grass. Then I gathered all corners together and lifted the sheet upward, thus consolidating the beads of water into larger drops that flowed down into the center of the sheet, forming a small puddle. I continued to tap the sides to consolidate all of the droplets into the bottom and then I carefully poured the puddle out the side and into a measuring cup (see picture).

Under the environmental conditions of the day, combined with the size of the sheet, I was able to collect about an ounce of water. Your results may vary.

Larger sheets with greater surface area will yield larger volumes of water.

It would be strategic to set out a number of sheets at the same time to increase the total yield of harvested water. Subsequently, I have used a thicker plastic sheet and found it much easier to control during the entire process. This would make a great weekend project and you would be more familiarized with the process and have a “hands-on” experience.

5

Mon-Thurs 9am - 5pm Eastern Fri 9am - 4pm Eastern Closed Sat & Sun

(800) 824 - 4655 (828) 536 - 4988

“Preparing you and your kitchen with tools, tips, skills and encouragement.”

Learn Preparation Skills

Excalibur Dehydrator

Sun Oven FREE WHOLE GRAIN RECIPES 6

Food Storage Needs

Grain Mills

RADIO SHOW

BULK FOODS

Hand Digging Your Own Well

Many years ago, the only way anyone was able to obtain drinking water was to find a source such as a river, creek or lake. The water source was a place of danger for many because predators (the four and two legged ones) realized everyone and everything needed to find their way to that source. The only option to this danger was to find an independent, less community based source of water. People soon realized that wells or holes in the ground, if dug in the correct locations, would fill with water.

been filtered by the soil. Keep your hand dug well at least 100 feet from any lake, pond or river. Water sources such as these can flood and contaminate your well. Do not dig near any dump stations, or commercial structures. You are looking for relatively rocky soil. Once you begin digging, you want the ground to maintain its shape and not collapse upon itself as you dig.

Tools and Materials Needed For a Hand Dug Well

Some materials will depend on how How to Pick the Right Loca- rustic you want your well. For safety concerns, you will need to house tion to Dig Your Well your well to prevent someone from Look for green foliage and grass; it falling in if you plan on digging an should be greener and “lusher” than open well. the surrounding area. This indicates there is water relatively close to the surface. Keep in mind once the well is dug you do not want water flowing across the ground from rainfall into your well. Therefore, do not dig your well in a depression. Why do you not want water running into your well from the surface? The ideal hand dug well receive its water from seepage well below ground level. Wells should fill from the bottom up. This ensures the water has been filtered by the soil. Rainwater running across the ground and flowing into your well is contaminated.

Contaminates can include fertilizers, animal wastes, human waste and so on. The ground’s surface for all practical purposes is contaminated. Water that seeps into the ground and finds its way to your well has

• Pick Shovel and Pry Bar to dislodge rocks • Bucket and Rope: rope must be long enough to reach the bottom of the well • 24 Foot Ladder • Concrete if you plan to cap your well

Digging the Well Begin digging and do not get rid of the rocks and soil that you have excavated from the well, keep the soil and rocks close. You will need the material for back fill. Your well can be virtually any size you want.

However, the only advantage to a large well is its holding capacity. All wells will fill back up as the water is used. Keep it small, four foot across by four foot should be ample. Just make it big enough to ensure you have room to dig and fill the bucket to be hauled to the surface. Dig a circular hole; this makes it less likely to collapse. You can shore up

7

the sides with brick once the well is dug or leave bare. Once the casing and supply pipe is in place, you will back fill around the casing with rocks or chipped limestone. Wells that are drilled will have a casing pipe typically made of concrete that is lowered into the well and then the entire well is backfilled around the casing with crushed stone and concrete. The well cap, which is concrete, protrudes several feet above ground. Once completed the pumping system is lowered into the casing. Many municipalities have code requirements for how far above ground the cap must extend. Many areas require a concrete pad encase the well to prevent runoff contamination as well. Once you reach water, keep digging. Dig until the hole has at least three feet of water in it. You want to ensure your hand dug well will fill back up quickly enough after drawing water from it to prevent running out of water.

Remember, you want the well to fill from the bottom up. It will fill if you have reached the water table or have tapped into a source that feeds lakes or ponds in the area.

For a very simple casing, you can use 1 ½-inch PVC pipe. Additionally you will need an elbow that fits the 1 ½ pipe and the other end must be adapted to fit the supply line which is 1 ¼-inch PVC. The supply line is attached at the bottom of the casing using the elbow and reducing adapter. Both pipes, when the well is backfilled, will protrude two feet above ground level. How to create a hand pump will be discussed later.

The casing must have weep holes in it below the water depth, but not all the way at the bottom. Leave a foot of space between the holes and the elbow. Drill the holes around the pipe. The holes can be drilled using a half-inch spade bit. The weep holes 8

allow water to seep into the well casing. This is your source of water.

The water seeps from the ground, fills up around the backfill and seeps into the casing. Before lowering the casing, fill the first bottom foot of the well with rocks or gravel. The casing and supply line will be centered, so standing up should make it two feet above ground level. Back fill with rocks and gravel, the top few feet you can use soil, while ensuring the casing and supply line is centered. You won’t really know how much pipe you need until you have reached water.

Some wells can be 20 feet deep or less. Once backfilled, to keep your well from filling with muddy water from ground runoff, you can pour a concrete slab that exceeds the wells diameter by one foot around. The concrete will cover the entire well.

The casing will protrude from the concrete. Any water that seeps into the well at this point will be filtered by the soil. You want to prevent any runoff from filling your well from the top. Once you have completed the well you should attempt to pump it dry to flush out any mud or other debris. Doing this also allows you to determine the recovery rate of your well.

If you want a well without a casing where you simply lower a bucket to dip water, of course then you have an open well. However, this type of well will need to be shored up with brick, and a well housing must be built over the well for a hand crank and for safety. The housing must be such that humans or animals cannot fall into the well.

Hand Pump Basics Materials needed to construct a hand pump and operate in a well with a 1 ½ PVC casing:

• 1 ½ and 1 ¼ white PVC pipe for hand pump: length is determined by well depth • 1 ½ PVC pipe to run from well casing to where you want the water pumped to • Pipe Cap sized to cap off Piston Pipe • PVC elbow to fit the 1 ½ PVC pipe and adapter to fit the 1 ¼ pipe • Well casing pipe which is the 1 ½ PVC pipe • Pipe Glue • Epoxy Glue • Additional length of 1 ¼ PVC pipe to be used as the Piston The simplest hand pumps operate by hand. The pump has a piston, which drives the water by pressure. A very simple piston pump system can be fashioned to extract water from your well. The simplest method is to use the one half inch PVC pipe as the casing, and from this point assume the casing is the 1 ½ PVC. Before lowering the casing, you must attach the elbow to the bottom of the casing using the pipe glue. Weeps holes must be drilled into the casing as well. Use a ½-spade bit; ensure there is a space of at least a foot between the weep holes and the elbow.

This allows the pipe to hold water that can be plunged against with the piston pipe. The other end of the elbow must be adapted down to fit the 1 ¼ pipe. Both pipes will be protruding above ground when the well is backfilled. Once the well is backfilled, attach another elbow to the 1 ¼ pipe protruding above ground to run the water supply to where you want. This is the same concept used in bicycle tire pumps.

So what you will have when completed is the casing attached to a smaller pipe with both sticking out of the ground. A piston pipe is lowered into the casing to push the water into the smaller diameter pipe.

This creates pressure that will push the water up the supply pipe. The piston pipe is another section of 1 ¼ PVC that fits snug into the 1 ½ casing pipe. The end that is lowered into the water is capped off or you can fill two inches of the pipe with epoxy glue. Attach a t-bar to the top of the piston pipe to make it easier to push. You are pushing the water through the pipe. An up and down pumping motion will build pressure as the water meets the smaller pipe, which increases the resistance.

This is a very simple method and can be adapted in numerous ways.

The materials can be found in any home and garden store. The weep

holes in the casing are what fill the casing. Once the piston clears the weeps holes, the suction will be broken to begin pushing water again.

Push the piston until the water pressure increases against the elbow.

The smaller pipe creates additional resistance.

To increase resistance without using an elbow you can attach a Ptrap, which is an “S” shaped fixture that can found under your kitchen sink. The P-trap is designed to hold water. The piston will always be pushing against the resistance in the trap. Resistance is the key to a hand pump. The supply pipe must be smaller than the source pipe or casing. The downward motion of the piston, even though the piston is not airtight in the casing, will create pressure against the smaller pipe.

Pressure pushes water up the pipe.

Smaller pipes will require less pres-

sure to move the water. The casing and supply lines can be sized to fit your individual requirements.

It is important that the pump be assembled prior to lowering into the well. The backfill is what holds the casing and supply lines in place.

Once backfilled you obviously cannot perform any work on the casing. The pump is primed when the pistons raises above the weep holes.

You can prime it by removing the entire piston if the fit is extremely tight to allow air into the casing.

Finding the right location for a well, acquiring the proper tools and materials, and creating your own hand pump may sound like daunting tasks – but the end result brings you one step closer to being self-sufficient and providing that necessary substance of water for you and your family.

Just One (1) Meal from common storage foods delivers between 30-51% of your recommended DAILY sodium intake.

According to the CDC, most Americans should consume less sodium (1,500 mg/day or less).

High Sodium Diets are associated with multiple health complications.

Don’t Let Salt Dominate Your Storage Foods and Endanger Your Family

MannaFeast helps support a balanced diet by delivering a variety of nutrient dense whole foods in one, 10 mg serving.

We will give you one guess why most storage foods have long shelf lives...

27 Antioxidant Rich Fruits & Berries 26 Powerful Greens and Vegetables 7 Nutrient Dense Seeds, Nuts and Sprouts Full Spectrum Fulvic Mineral Blend Plus 22 Resilient, Beneficial Probiotics Special BULK pricing available.

Minimum 2 year shelf life.

For more information contact:

877.562.2725

9

All of MannaLife International products are great additions to your storage food preparation. Contact your local distributor above to learn more.

Water Systems and Tanks

by Stanley and Kelly Gaddy

We

would like to share with

you some of our water collection and storage solutions that we manufacture at Carolina Water Tank for spring water, well water, municipal water and last but not least rainwater harvesting.

The best situation is to have or find a spring on your property. A spring is where the water comes to the earth naturally. We have a Water Collection System that accumulates the spring water as it emerges at the head of the spring. Once installed it filters off debris and passes the water by gravity to the spring box or reservoir. The main purpose of the Water Collection System is to keep surface water (rain/runoff) from contaminating the spring water. The Water Collection System is designed to adapt to many spring development situations. When the Water Collection System is installed properly and the water is passing through the collection pipe, we recommend the installation of our Spring Box. The Spring Box is molded in one piece without seams. The large friction-fit-cover slips on and off easily for inspection and cleaning. The unit is outfitted with a water inlet,

10

water outlet, shut off cap, setting area, and gauging system.

The Spring Box receives the collected water from the spring and filters a desired amount of water through the unique gauging system to the reservoir. The gauging system can be set at seven intervals ranging from 380 gallons to 1,520 gallons for a twenty-four hour period or the flow can be shut off to the reservoir.

The gauging can be set or changed within seconds and is accomplished without valves or tools. By design, the flow of spring water insulates the filter to prevent freezing in cold weather.

The Spring Box is designed not to back up water to the spring, as any appreciable buildup of water pressure could reduce the spring’s flow or make the water emerge at some other point.

The surplus water flows out the overflow and drain outlet. From the Spring Box

the water flows to a reservoir (tank).

A water holding tank receives filtered water from the spring box and stores the desired quantity for use when needed. Proprietary green or grey color resin is designed to reduce and retard the growth of algae.

The circulation of water through the reservoir and out of the overflow keeps water fresh and prevents freezing within the holding tank. The standard set up for our water holding tanks come with 1-1 inch water inlet, 1-1 inch water outlet and 1-1 inch overflow with pipe.

We offer a wide range of water holding tanks, above and underground for potable drinking water. The best way to decide the minimum size of tank is to determine how much use per day is needed per person to be stored and how quickly the flow to the spring can replenish the amount of water used.

The perfect situation is a gravity flow system from a spring. This system is where the holding tank is located on an elevation above the desired point of use. The desired pressure is built up by fall of the water (1 foot of fall equals .43 PSI); thus, if you had 100 feet of fall you would have 43 PSI at delivery point. If there is not enough fall the holding tanks can be equipped with a pump delivery system. The pump can be installed internally or externally to the tank. The pump situation can be determined by the user with options such as solar, electrical, or ram.

Well water and municipal water can be stored as simple as putting tanks in a basement, crawl space, garage, out building, etc‌ This can be done by simply tying in to your existing water lines and installing float valves or switches to control the flow of input or output. This allows the extra water stored to circulate during use.

If you want to take a tank and just fill it full of water for storage by well or municipal, the steps you will need to apply to maintain this water is to rotate at least every 3 to 4 months (this can vary) or you can maintain it by adding calcium hypochlorite, better known as pool shock. It must be 67% calcium hypochlorite only with no additional anti-fungals or algaecides. The amount you need to add depends on the size of tank.

Rainwater can be used for drinking, cooking, and cleaning after being properly treated and can be stored for later use. With the right rain tank, all of your rainwater can be saved and utilized. A rainwater harvesting system is a combination of many components: catchment area, conveyance, storage, delivery and filtration.

The most logical catchment area is the roof of a building. To calculate the number of gallons that can be harvested, take the catchment area and square feet and multiply by depth of rainfall in inches by a conversion factor of .623 (100 sq. ft. x 1 inch of rainfall = 62.3 gallons). Using this formula you can determine

what size tank and how quickly it can be filled.

The conveyance consists of your guttering, downspouts and piping to storage tank. Guttering needs to be screened to keep large debris from entering the rain collection system and it is also recommended that a

first flush diverter is installed on your downspouts. The first flush diverter is a device that diverts the first water that flows off the catchment area from the storage tank; this water is the most contaminated due to pollutants from the air and from surrounding foliage and animals feces. The diversion chamber is sized by the how many gallons per square feet of catchment area (1.5 gallons per every 100 square feet). The piping needs to be large enough to carry the volume of water that may fall in the hardest of rains.

Your storage tank holds the water collected and is sized by the user.

We recommend that you screen the water before entering the tank. The two options we offer for our tanks is our downspout adaptor which has an in-line screen or a basket screen.

These screens have two functions, one is to catch any fine particles and

the other is to calm water before it enters the tank and create turbulence. Our tanks have a standard 2 inch overflow that is capable of carrying 23 gallons per minute of water. At this rate our tanks could handle a 1,000 square feet of roof at a rainfall rate of 2 inches an hour.

The overflow water can easily be plumbed away from the tank. The 1 inch water outlet can be plumbed as needed.

Also, it can be fitted from the inside to accept a floating intake. A floating intake is used mostly when water is going to be used for drinking. It is a floating device inside the tank that picks up the water at 4 to 6 inches below the top of the water where the water is the most pure.

Once the water has been collected in storage tanks, the process to deliver is up to the user preference of gravity, electrical pump or solar.

The preferred sanitation steps for making the water potable is to run through a treatment train consisting of a 3- to 5- micron filter and through a 0.5-1.0 micron filter and then a UV light. I recommend that one of the filters be an activated charcoal to improve the taste of the water.

Prepping for your water supply should be one of your highest priorities. The important thing to remember is that you should have at least 1 gallon per person a day for survival, 4 gallons per person per day will allow personal hygiene. Average humans cannot survive 3 days without water.

11

Budget-Friendly Tips for Water Storage by Lynette Fry Most everyone has heard the rule-of-thumb that a person can live 30 days without food but only 3 days without water, so this fact alone should move water storage to the top of the preparedness priority list!

But, what do you do if you are on a tight budget?

For drinking water you have a couple of options; you can purchase sterile/sealed water at your local grocery that will store for up to a year or you can bottle your own. Water can safely be stored in food grade plastic or glass containers which have tight fitting screw-on caps. Most food-grade containers are ones which previously held beverages, such as 2-liter soda bottles, water, or juice. Based on my prior research, I avoid using milk jugs because removing all the protein and fat residue is very difficult and could allow bacteria to grow during storage.

Some water vending companies will sell new, empty water containers which are good for water storage. Plastic food grade containers can also be purchased from your local house wares or sporting goods stores to make great storage for water.

I use 2-liter soda bottles which I add 2-3 drops of unscented bleach to.

These are rotated out every 12 months and they are kept in a cool, dark storage area. Sunlight tends to grow algae so you never want to store your drinking water within any threat of sunlight. Also, please remember, bleach is bleach so there’s no need to go to the brand name – an off brand bleach will work and can be found on sale for as little as one dollar per gallon!

For grey (waste) water needs, such as dishwashing, laundry, or garden watering, a lot of people are turning to the large black barrels that hold 55 gallons of water. These are available at most local farm supply stores.

Craigslist.com is a very budget-friendly option for grey water catchment supplies. In our local area, a quick search returned a seller who was asking $2 each for 55 gallon drum! These drums quickly became our future grey water containers. Most of these drums I’ve seen previously held pickles and they are food grade, but we choose them for rain catchment.

Please be reminded: before you start your water storage system, keep in mind the intended use of the water to insure its proper storage.

12

AquaRain Gravity Water Filter

The AquaRain model 400 is a double-decker gravity water filter that consists of an upper and lower chamber and a lid.

It combines 4 ceramic filters made from diatomaceous earth with granulated activated carbon to trap bacteria and other undesirable elements in the filters to produce clean, freshtasting water almost effortlessly. The simple design, non-electric function and no chemicals or salt needed, appealed to my family since this fits in well with our back-to-basics and more natural preferences. In preparedness for water system breakdown or contamination, a gravity water filter is the most efficient filter for the home and the best choice for non-electric operation. The stainless steel Aqua Rain is my choice over the Pur Water Pitcher, the Sears Electric Water Distiller, the Katadyn Combi filter and the Katadyn plastic gravity water filter. The AquaRain model 400 is large enough to handle a whole day’s worth of filtered water for our family (where the smaller filters could not) and because of the Aqua Rain’s stainless steel housing, ceramic and carbon filtering system and efficient non-electric function.

I highly recommend the AquaRain water filter for anyone concerned about their family’s health.

Conclusion: Recommended Vickilynn Haycraft

13

Finding and Tapping a

ground aquifer that is higher geographically than the spring itself and gravity plays a role in forcing the water to the surface.

A fracture spring occurs where there is a break or fissure in rock faces or the earth itself. Many fracture springs can also have a natural cistern where the water collects as it breaks through the fissure. The water is typically safe to drink where it flows from the fissure. Water that has collected in the cistern can be contaminated by animals and blown debris. Water from seepage springs

Natural Spring Essentially a spring is a natural occurrence where water flows from underground up to the surface. There are seepage springs and fracture springs. Seepage springs are springs where the water has filtered through the soil and then finally reaches the surface. Typically, these springs can be found on hillsides, in caves and earth overhangs. They can be found occasionally on relatively flat surfaces as well. This is usually caused by an under-

14

is safe to drink as long as the water is tapped from the spring and is not collected from any natural depressions close by. However, this is providing there is not soil contamination in the area from an industrial complex, buried underground storage tanks or a waste dump nearby that may have contaminated the soil from runoff.

In the 19th century, springhouses were quite common. Homeowners would settle on land because of the abundance of water. They would find a natural spring and tap it for their water source. They would build a small shed, called a springhouse, over the spring.

They typically dug a cistern and

lined it with rock for water collection. The spring flowed into the cistern. The springhouse was also used as a refrigerator because of how cool the springhouse stayed due to the water from the spring underneath. Owners stored vegetables, meat, eggs and even milk in their springhouses.

Today the concept is the same.

However, pioneers had stouter stomachs than many do today so filtration must be considered when tapping a natural spring.

You can make your own filtration systems using charcoal. Begin making your own charcoal filter by building a rather large fire using only hardwoods (do not use pine). Never use any construction material, treated lumber or any man-made fire logs or products.While the fire is going, you can begin assessing your spring.

The source of the spring is underground and as the water percolates to the surface, it is scrubbed clean. Only when water reaches the surface is it subject to contamination. You must protect the area where the water reaches the surface. To ensure your water is clean and safe you should filter it close to where it will be used, for example just before it reaches the tap or water spout inside the home.

The spring in most cases will be higher geographically relative to the surrounding area. Therefore, you can use gravity to feed the spring into your home or structure. To ensure clean water, excavate several feet back into the spring and lay down some flat rocks for the water to run over.

You can build up the sides of the channel with stone as well. What you are doing is channeling the water so it can flow into a delivery pipe to a location you want, such as your house or shelter.

Use any safe pipe such as clay, tile, galvanized steel, copper or PVC to carry the water to your filtration station. The ideal filtration container is a whiskey barrel. The barrel will already have a certain amount of charcoal built in. Fill the barrel with the charcoal you have made. It does not have to be entirely full. Have the pipe that carries the water flowing into the barrel. You will have to install a shut off valve in the pipe because you cannot have the water constantly flowing into the barrel. Many barrels have taps in them, so simply turn the tap for clean and wellfiltered water. Protect the barrel from insects and other debris. If there is not a tap, install one near the bottom so gravity will force the water out. Change the char-

coal when it begins to lose some of its dark black color, or if you have run a usually large amount of water through the system. You will not necessarily need to filter spring water for bathing, washing clothes or cooking. Filter the water for drinking, coffee, juices and oral hygiene.

Back to making charcoal; pull the wood from the fire when it looks like charcoal. Smother the wood with ash or soil to keep it from burning down to ash and let the wood/charcoal cool. Store the charcoal in such a manner so it will not become contaminated.

Crush into relatively small pieces when ready to add to the filter barrel.

Charcoal can remove many types of pesticides, heavy metals, chlorine and certain other chemicals, fuels such as diesel and gasoline, and certain solvents from the water. Charcoal cannot be used to filter certain toxins and poisons from deliberately contaminated water.

15

Water Sources, Dangers, and Purifiers by Jason A. Hunt Knowing how to effectively gather, clean and purify drinking water is a skill that everyone must understand. As we mentioned previously, the days of simply drinking from the local creek are pretty much gone due to all the chemicals and waste being pumped or dumped into our ground water systems today. In the end-times, the Bible tells us that all the waters will become bitter and as blood (Rev. 16:3-7), praise God for the provision that comes from He who is the living water!

There’s a common misconception that you must ration water as you would food. This is not true.

The effects of water deprivation come on too strong and fast and will affect you often before they 16

are realized; it’s best to sip your water methodically and normally.

Guzzling, that is drinking a lot at one time will often upset your stomach if you have been without water for an extended period, which can lead to vomiting and a greater loss of precious fluids from the body.

Dangers in Drinking Water

which would require fluids to be replaced intravenously. Without proper treatment at an advanced stage, death can occur.

Hepatitis A – Hep A is obviously not friendly as it’s a disease of the liver caused by viral infection.

Symptoms include loss of appetite, nausea, vomiting, fever, dark urine, tiredness, and abdominal pains and jaundice (yellowing of the skin and eyes). While the disease is not life-threatening it can take months to overcome its effects with medication. Typically once overcome your body will create antibodies that will aid in the prevention of a recurrence of the disease.

Cholera – Cholera is the friendliest bacteria found in water as it typically only leads to diarrhea. It is treated by continually replacing the lost fluids by drinking clean water. Continuing to drink cholera infected water however can lead to increased infection which will include leg cramps, Giardiasis – Giardia is a single vomiting, dehydration and shock, celled parasite that lives in the in-

testines that is ingested by drinking water contaminated by sewage. This organism can survive outside the body for a long time and is one of the most common waterborne diseases. Symptoms include greasy stools that tend to float, diarrhea, cramps and nausea. Advanced symptoms can lead to weight loss and dehydration while others have no symptoms at all. The problem is typically alleviated by flushing the parasite from the body over a period of several weeks with clean fluids and medication if required.

Chemical Pollutants – The big issue with chemical pollution is that it won’t boil out of your water. Most of the chemicals are heat resistant and must be filtered out through charcoal or another

type of filter system. If you find water in the middle of a tobacco, soybean or corn field, you can bet that the water has been contaminated by some sort of chemical.

Check for flora around the area and look at their condition – do they look healthy? Are they thriving in the area? Are there fish or frogs in the water? Frogs in the water are a good sign of a proper ecosystem but this again is no guarantee of a chemical-free environment. When in doubt, filter and boil it out.

Natural Sources of Water Seasonal creeks and run-offs – These areas are typically only active during and shortly after a rain and should be treated like chemically polluted water since

normally anything sitting atop the ground surface will be flushed into the stream, thereby polluting the available water. These water sources should be filtered and boiled or chemically treated.

Rainwater – Your best source of clean water comes from heaven above, collecting it is simply a matter of taking advantage of the weather and utilizing whatever containers you have available. If you are in a heavily industrialized area, however, you can get some chemical taste and possible infection. You can also collect rain water in the way of dew by tying cloth around your ankles and trekking through some tall grass. The cloth will quickly become filled with water which can be wrung out into a bowl or con-

17

tainer to be filtered of turbidity you can place plastic tie bags over leafy boughs on live trees and al(solids in water). low the sun to heat and condense Rivers and Streams – Like the air in the bag which will crecreeks and run-offs, rivers and ate water after several hours. streams should be filtered whenever possible and boiled. Mil- Filtering and Purifying Water lions of people still rely on water from rivers and streams around Boiling – Boiling remains the the world for their daily water; best method of killing off the madrinking straight from the source, jority of living organisms within however, is not advised because water. Theories range from boilbacteria and viruses can more ing 15-20 minutes to only bringeasily reproduce in slow mov- ing to a boil for a few moments. ing water. And when the water is Again, keep in mind, boiling does up, these sources fill with run-off not remove chemicals. from the surrounding areas and serve as nature’s toilet system, Filtering – Filtering by means of a modern filter such as a flushing waste out of the area.

LifeStraw or Katadyn are excelPlant Water - Here in the East- lent for removing turbidity and ern Woodlands and also in many many viral and chemical agents, jungles, water can be harvested but boiling first then using a filter from vines by cutting a section such as these is your safest bet. approximately 3 feet long at an When you know you have some angle on both ends; water will chemically affected water you drip from of the cut surface of the can also make a primitive filter vine and provide some needed from charcoal, grasses and sand. hydration. If the water you find Filtering through these sediments is cloudy or bitter coming from within a container removes the a vine, this should be avoided as majority of chemicals that could it is the wrong species. You can adversely affect your also tap trees such as the maple or body. If you rely on birch which provides sap which a modern commercan be consumed as it is or boiled cial filter, take time to down to a sweet liquid much like read the instructions so syrup. In the desert, Aloe and you will know how to Agave plants survive extended properly use it and unperiod of drought and store liq- der what conditions it uids in their leaves which can be will work most effectively. harvested for liquid.

Prickly pear cacti house hundreds of tiny spikes and contain liquid in their fleshy pads. Coconuts also provide a wonderful source of fluids which aids in the replacement of electrolytes. Lastly,

Purification Tablets – If you use purification tablets of any type, read the instructions.

They often make the water taste like bleach,

but it’s very safe to drink. When using these agents shake the water well to make sure the chemical tablets reaches all the water in your container and if you have an enclosed container, be sure to flip it over so that cap is hit by the chemically cleaned water to kill off any hidden bacteria lurking in the cap.

Desalination – If all you can find is salt water, you will have to desalinate it (remove the salt). The salt in saltwater overworks the renal glands quickly which leads to kidney failure, shock and a host of other issues. Distill the water by hanging a can full of water over a fire and placing a clean cloth over the lid to collect all the steam. From time to time wring out the steam into a potable water container to drink once it cools.

The salt that remains behind in the can should be utilized to season game meats as you harvest them.

Solar Distillation – When in a pinch you can distill water sev-

eral different ways, one of which is by putting it into a clear bottle and allowing it to bake in direct sunlight all day (8-10 hrs). This allows the water to condense inside the bottle and rain back down much like it would in a terrarium.

The key is to not completely fill the bottle as you need that air space in there to allow the liquid to condensate along the top of the bottle while lying on its side.

Other methods are as simple as placing some plastic sheeting over a hole with a container in the middle to collect the water. Place some greenery in the hole around your container and allow the sun to heat the plastic which forces water from the plants creating condensation which drips back down into your container.

The main thing with water is that you must understand several ways of finding it and cleaning it so that it may be used to prolong your life in a survival situation. Looking back at those in Hurricane Katrina; many died of dehydration and exposure simply because they didn’t know how to make a quick shelter or clean and purify water, despite all the water around them. Of course, even if you understand how to do these things it will never do you a bit of good unless you practice these skills on a regular basis. I believe these are perishing skills that need continual refinement.

By practicing on a regular basis in a variety of atmospheres and conditions you will be better prepared to manage an emergency should you be involved in one.

Of course, the scriptures are also filled with examples of how God provided water for the Israelites in their desert wanderings. In Exodus 15: 22-27, we read the account of the bitter waters found at the oasis called Marah (which means bitter). God instructed Moses to place a tree into the water which made it good to drink.

The Hebrew word for tree in this passage is es which can mean any part or product produced by a tree from the roots and leaves to branches or planks cut from the same. Whether or not this means God taught Moses how to construct a filter or not isn’t made clear, but in any case God made the water drinkable and we should pray for the same results should we be faced with similar circumstances.

In Exodus 17:6 we read that again God provided water for the Israelites when Moses struck a specific rock. This rock in Hebrew is sur which has the meaning of

flint, a title of God and a place of safety and security; this is very interesting as all of these meanings describe Jesus Christ:

His face was set as flint… Isaiah 50:7 He is the rock of our salvation… 1 Corinthians 10:4 He is our refuge in the day of tribulation… Jeremiah 16:19 From Him will flow rivers of living water… John 7:37-39 Like the greater purpose of shelter, providing a means of our protection from the elements and serving as an eternal symbol of what our Messiah has done and a rehearsal for what he will do for us; water is also a symbol that points us to Him as our source of refreshing and life – without water, man cannot survive – just as man cannot live without being born again in Christ Jesus (John 3).

20

A Pastor’s Perspective

The Water of Life

by Jeff Rowland

The word of God is full of information concerning the power of water. Jesus met a woman one day by a well that was full of fresh drinking water and said, “whosoever drinketh of the water that I shall give him shall never thirst; but the water that I shall give him shall be in him a well of water springing up into everlasting life.”

Thank God for the ability to find water and the ability to dig wells that brings forth water for the weary. How God could use all who are willing to give to another who is thirsty, life sustaining water. But how much greater would it be to show people how they can have a well of water springing up inside them that would produce life giving water?

We know that Jesus is referring to a thirst that is much deeper than that of water.

Water is what is needed for a thirsty body but only Jesus can satisfy the thirst of the soul.

Many who are looking for the next great teaching or teacher, or those who are looking for the next great purpose or goal to reach, are really looking for the satisfaction of the thirst that is deep within their soul.

We learn from this passage found in John chapter 4 that Jesus will give to all who ask. The Woman at the well pointed out that Jesus was a Jew and she was a Samaritan, which meant by the society’s standard they should have nothing to do with each other.

Jesus did not operate by society’s standard but by His standard. The standard of God is to give a thirsty soul water and a hungry soul food. To give light to those who are in darkness and shelter to those out in the cold. Jesus said whosoever drinks of the water He gives. I’m so thankful that He didn’t turn me away because of how weary, wicked and thirsty I was, but was willing to give to me the water of life and place within me a well of satisfaction to draw from when my soul would be weary.

We learn from this passage in John chapter 4 that the water Jesus gives will always be available. His water forms a well inside of us that springs up into life that is everlasting. It is only Jesus that can take care of what the heart is really longing for. The desire deep within us can only be satisfied by life. That’s what motivates man to any action. Life is what we long for. Anything that we can attain or find to help aid in the pursuit of life is the motivator to action that we need.

The power of life is in Jesus. All those who come to Him will attain life everlasting. This is the greatest preparation we could ever make. The Father in Heaven prepared for our salvation by giving to us His Son Jesus as our personal Savior. The only way toward everlasting life and eternal destiny in heaven is to prepare by placing your faith in the giver of life giving water. Get prepared today.

21

PREPARE Magazine PREPARE MAGAZINE www.preparemag.com

Contributors

Publishing Lynette Fry Mainline Marketing Group, LLC Chief Vision Officer Joseph Miller Managing Editor Donna Miller Printing Publisher Jon Eklof Legal Compliance J.S. Defner, Esq. Design and Graphics Coolbrees Studio Contributing Editor Britt M. Advertising 800-899-6986, Ext 8 advertising@preparemag.com

Subscriptions www.preparemag.com/register subscription@preparemag.com

Contributors/Community Connections

www.preparemag.com

contributors@preparemag.com

Support Services www.preparemag.com/support

support@preparemag.com

Lynette Fry is a freelance writer, instructor, speaker, website and talk radio hostess. She enjoys hosting her weekly talk radio program ‘Prepping On A Budget’ on Blog Talk Radio. Her passion is providing others with the necessary tools to move forward in their own preparedness journey and she accomplishes this with online and on-location workshops, an e-book, and personal coaching. Lynette is the owner of PreppingOnABudget.com and enjoys her rural lifestyle, with her husband and dog, in the deep south!

Stanley and Kelly Gaddy Stanley and Kelly Gaddy acquired Carolina Water Tank in 2008. Carolina Water Tanks continues to manufacture and provide quality water collection and storage systems. Stanley is an “Accredited Professional” with American Rainwater Catchment Systems Association. As we become more involved with the prepping community, we strive to become more self-reliant and help others with their needs for water.

Vickilynn Haycraft The hostess of the Get Real – Get Prepared radio show on PRN. She is the author of: Wrapping It Up! and coauthor of Naturally Healthy Cuisine, Real Food for Real Families. Vickilynn is a sought-after independent product tester and book reviewer delivering accurate, honest, and trustworthy reviews on products and books for the whole family. Subscribe to Vickilynn at: www.realfoodliving.com.

Jeff Rowland Reverend Jeff Rowland is an Evangelist, Preacher, Author and Accomplished Songwriter. Jeff is from Chillhowie, VA,

22

and comes from a preaching and singing family. He sang with his family until joining the US Army as a member of the 82nd Airborne. While in the military, Jeff surrendered into the ministry and was ordained in 1985. After leaving the Army, Jeff has served as a Pastor and Evangelist, and now travels full-time, extensively across the United States sharing the gospel of Jesus Christ and the message God has given him for these Last Days. For more from Jeff visit: JeffRowlandMinistry.com

Jason A. Hunt Jason A. Hunt is the President of Frontier Christian University and founder of Trailblazer Ministries. He’s authored over a dozen reading titles including “Reasons for Seasons, Origins of the Christian Holidays” and “Walking the Narrow Path”. To learn more visit: http:// www.tribulationsurvivalguide.net/

Ken Youngquist Ken Youngquist is the creator of Survivaltek, a website dedicated to teaching the ways and means to survive.

From his youth, Ken was captivated by primitive living skills, and in his adulthood was intrigued by the television Series MacGyver. The result has been the study and practice of survival skills and the desire to pass on the mantle of preparedness to others. You can visit and learn more at: Survivaltek.com

Donna Miller Donna Miller is a teacher, author, sought-after speaker and trainer. She has been both guest and host on internet and broadcast radio talk-shows and in television interviews. She enjoys teaching online and local classes & ladies retreats for others to learn more than head-knowledge of preparedness skills. Donna is happily married and has three adult children. She and her husband (Joseph) are the founders of both Millers Grain House and Your Preparation Station.

ADVERTISE WITH US Extremely Affordable Advertising Rates

Vibrant and Passionate Reader Base We Limit the Number of Advertisements in Each Issue

Looking for Quality Advertising Partners to Grow with Us!

Special Promotional Rates (Limited Spaces Available)

Click this Page for More Details

Legal: Although PREPARE Magazine works hard to present you with advertisements for quality products and services, PREPARE Magazine cannot spend the time to do the due diligence it takes to ensure that only reliable services and products are advertised with us.

Therefore, you should understand that PREPARE Magazine does not represent or endorse the accuracy or reliability of any of the advertisements in our magazine or the quality of any products, information or other materials displayed, purchased, or obtained by you as a result of an offer in connection with any advertisement.

PREPARE Magazine encourages you to do your own due diligence before purchasing any product, whether it is offered here or anywhere else for that matter, before purchasing. Please use your own judgment and carefully check out those products that interest you.

Under no Circumstances shall PREPARE Magazine, or Mainline Marketing Group, LLC., be liable for any damages, whatsoever, and in particular, shall not be liable for direct, indirect, consequential, incidental, or punitive damages, or damages of lost profits, loss of revenue, or loss of use, arising out of related to any portion of this Magazine or the content, information, or advertisements contained in it, whether such damages arise in contract, negligence, tort, under statute, in equity, at law or otherwise.

23

Mainline Marketing Group, LLC. 217 Paragon Parkway, #210 Clyde, NC 28721 (800) 899-6986, Ext. 8 (800) 991-0973 Fax